MIPI M-PHY Transmitter and Receiver Test Solutions - M ... - Tektronix

More documents

Recommendations

Info

Data SheetCharacteristicsM-PHYRX CharacteristicsCharacteristicSpecificationProbing ConfigurationReportsMeasurementsDescriptionM-PHY Essentials CharacteristicsCharacteristicM-PHY BaseSpecificationM-PHY ConformanceTest SpecificationProbing ConfigurationReportsM-PHY Base Specification Revision 1.0, andConformance Test SpecificationDifferential acquisition using differential probes or SMAcables.MHT format and Excel .XLS format, with Pass/FailtablesHigh-speed modeTest 2.1.1 – Differential Input Voltage AmplitudeTolerance(V DIF-RX )Test 2.1.2 – Receiver Eye Opening and AccumulatedDifferential Input Voltage (T EYE-RX ,V DIF-ACC-RX )Test 2.1.3 – Common Mode Input Voltage Tolerance(V CM-RX )Test 2.1.4 – HS-RX Differential Termination EnableTime (T TERM-ON-HS-RX )Test 2.1.5 – HS-RX Differential Termination DisableTime (T TERM-OFF-HS-RX )Test 2.1.7 – Receiver Jitter Tolerance (TJ RX ,SJ RX ,RJ RX ,STTJ RX ,STSJ RX )Test 2.1.8 – Receiver Pulse Width Tolerance (T PULSE-RX )DescriptionRevision 1.0Revision 0.65Single-ended acquisition using single-ended probes, ordifferential probes in a single-ended fashionMHT format, with Pass/Fail tables and waveformscreenshotsThe following tables provide the details of transmitter test coverage for both the basespecification as well as conformance test specification.Tx Measurements (Base Specification)Test Name andGroupDifferential Peak toPeak VoltageTest Symbol HS-LargeSwing HS-SmallSwingV DIF_PK_L_NT_TX Yes YesV DIF_PK_L_RT_TX Yes YesV DIF_PK_S_NT_TX Yes YesV DIF_PK_S_RT_TX Yes YesV CM_S_TX Yes YesCommon ModeVoltage V CM_L_TX Yes YesSlew Rate inFastest Slew RateStateSR DIF_TX Yes YesTransmitter Pulse T PULSE_TX Yes YesWidthEye Opening T EYE_TX Yes YesDeterministic Jitter DJ TX Yes YesTotal Jitter TJ TX Yes YesTotal Jitter for Short TJ TX Yes YesLaneShort Term Jitter STJ TX Yes YesResolution of Slew ΔSR DIF_TX Yes YesRate StatesPower SpectralDensity/MagnitudePSD Yes YesTx Measurements (Conformance Specification)Test 1.1.1 – HS-TX Differential DC Output Voltage Amplitude (V DIF-DC-xA-xT-TX )Test 1.1.2 – HS-TX Transmitter Eye Opening (T EYE-TX )Test 1.1.3 – HS-TX Maximum Differential AC Output Voltage Amplitude(V DIF-AC-xA-xT-TX )Test 1.1.4 – HS-TX Common Mode Output Voltage Amplitude (V CM-xA-TX )Test 1.1.5 – HS-TX 20/80% Rise and Fall Times (T R-HS-TX and T F-HS-TX )Test 1.1.7 – HS-TX Slew Rate (SR DIF-TX )Test 1.1.10 – HS-TX Intra-lane Output Skew (T INTRA-SKEW-TX )Test 1.1.11 – HS-TX Transmitter Pulse Width (T PULSE-TX )Test 1.1.12 – HS-TX Total Jitter (TJ TX )Test 1.1.13 – HS-TX Deterministic Jitter (DJ TX )Test 1.1.14 – HS-TX Short-term Total Jitter (STTJ TX )Test 1.1.15 – HS-TX Short-term Deterministic Jitter (STDJ TX )Test 1.1.16 – HS-TX Common Mode Power Spectral Magnitude Limit (PSD CM-TX )Ordering InformationM-PHYRX AutomatedModelDescriptionDPO/DSA/MSO70000C DPO (Digital Phosphor Oscilloscope), DSA (DigitalSerial Analyzer), or MSO (Mixed Signal Oscilloscope)Oscilloscopes –6 GHz and above is recommended for HS-Gear18 GHz and above is recommended for up to HS-Gear220 GHz and above is recommended for up to HS-Gear3AWG7000C Arbitrary Waveform Generator –DPO/DSA/MSO70000COpt. M-PHYRX* 2DPO-UPOpt. M-PHYRX* 2DPOFL-M-PHYRX* 2AWG7082C or AWG7102* 3 or above is recommendedfor HS-Gear1AWG7122B/C without Interleave Option 06 isrecommended for up to HS-Gear2AWG7122B/C with Interleave Option 06 isrecommended for up to HS-Gear3M-PHY Automated Receiver SolutionIncludes: Latest TekExpress product software DVDkit (P/N 020-2913-xx) and upgrade SW key. Onlinedocumentation and printable manual in PDF format aresuppliedM-PHY Automated Receiver Solution – FloatingLicense* 2 Requires Frame and Bit Error Rate Detector for High-speed Serial Standards (Option ERRDT and ST6G).* 3 LAN interface is not supported.M-PHY EssentialsModelDescriptionDPO/DSA/MSO70000C/D DPO (Digital Phosphor Oscilloscope), DSA (DigitalSerial Analyzer), or MSO (Mixed Signal Oscilloscope)Oscilloscopes –6 GHz and above is recommended for HS-Gear18 GHz and above is recommended for up to HS-Gear220 GHz and above is recommended for up to HS-Gear3DPO/DSA/MSO70000C/D MIPI ® M-PHY Transmitter Debug, Characterization, andOpt. M-PHY* 4Conformance Test SolutionDPO/MSO70000CGSAOpt. M-PHY* 4DPO-UP/DPO7UPOpt. M-PHY* 4DPOFL-M-PHY* 4 MIPI ® M-PHY Transmitter Debug, Characterization, andConformance Test Solution (Floating License version)* 4 Requires DPOJET Jitter and Eye Analysis Tools (Opt. DJA).6 www.tektronix.com
MIPI ® M-PHY Transmitter and Receiver Test Solutions — M-PHY Essentials, M-PHYRX Automation, and M-PHY ProtocolsDecodeM-PHY DecodesModelMPHYVIEWDPO-UP Opt. SR-810BDescriptionM-PHY DigRFv4 CommView Protocol Decode(3rd-party software)8b/10b Serial AnalysisFixtures for M-PHY EssentialsM-PHY is a chip-to-chip interface. Most M-PHY designs are live withhost-device/Master-Slave receiver-ends connected. For these live setups nofixtures or termination boards are required, as termination is taken care of by thereceiver end. For non-live setups, M-PHY termination boards are expected to beavailable from University of New Hampshire (UNH-IOL) soon.Recommended Probes for M-PHY Essentials and M-PHYDecodes- 2x P7240 (HS-Gear1), or- 2x P73xx/P73xxSMA (up to HS-Gear2), or- 2x P75xx with P75LRST tip (up to HS-Gear3)Optional Accessories for M-PHY Receiver Testing- 2x TCA-SMA Connectors, for AWG custom patterns creationOptional Software for M-PHY Receiver Testing- NI TestStand Software – For additional automation and test sequencecustomization (www.ni.com)- Serial Express Software – For custom patterns using AWG-Option01–Memoryexpansionto64MenabledonAWG- Option 08 – Fast Sequence Switching enabled on AWG- Option 09 – Subsequence and Dynamic Jump enabled on AWGPrerequisite Host System Software Requirements forM-PHYRX- Microsoft XP OS with SP2 or later, or Windows 7-MicrosoftExcel2002orabove- Microsoft Explorer 6.0 SP1 or later- Adobe Reader 6.0 or equivalent software for viewing Portable Document Format(PDF) files- 2x P73xx/P73xxSMA for PWM All GearsRecommended Probes and Accessories for M-PHYRXAutomated- 1x P73xxSMA Differential Probe- 2x Matched pair of SMA cables-1xGPIBCable- 2x Rise Time Filter – 120 ps (part number 5915-121-120PS from Picosecond)with barrel connectors- 2x BiasTee, for AWG Interleave Optionwww.tektronix.com 7
Page 1: MIPI ® M-PHY Transmitter and Recei
Page 5: MIPI ® M-PHY Transmitter and Recei

MIPI M-PHY Transmitter and Receiver Test Solutions - M ... - Tektronix

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?