QPT-200 and QPT-500 Series - Moog Quickset

quickset.com
  • No tags were found...

QPT-200 and QPT-500 Series - Moog Quickset

QPT-200 Series and QPT-500 Series SeriesSerial IP FeaturesMicroprocessor controlSoftware controlled withstatus feedbackSerial Communication:RS232/422/485 and IPControl Protocols:Moog QuickSet and Pelco D2 programmable tours and32 presetsAnalog FeaturesSimple command and controlwith one controller for onepositionerAzimuth/Elevation positionfeedback outputPower supply integrated intocontrollerICMS FeaturesIP/66 rated and Universalconnector, Port A, Port B,Port C, Port DLoad CapacityOperating VoltageRangeStandard PerformanceAnalogQTP-200200 lb-ft (271 Nm) maximumQTP-500500 lb-ft (679 Nm) maximumQPT-200 115 VDCQPT-500 115VDCPan-Axis Range 420° (±210°)ICS/ICMSQPT-200 - 200 lb-ft (271 Nm) maximumQPT-500 - 500 lb-ft (679 Nm) maximumQPT-200 24VDCQPT-500 48 VDC420° (non slip ring)or continuous rotationPan-Axis Speed 0.001° - 8.0°/sec .001° - 20°/secTilt-Axis Range 180° (±90°) 180° (±90°)Tilt-Axis Speed 0.001° - 3°/sec .001° - 4°/secInternal HeaterOperating TemperatureRotational LimitsThermostatically controlled(32° on/35° off)Without Heater: -15°C to 55°C (5°F to 131°F)With Heater: -30°C to 55°C (-22°F to 131°F)Adjustable hard limit3 mode heaterSoftware adjustable limits withadjustable hard limit switchesFeedback Precision high linearity potentiometer 9k line optical incremental encodersRepeatability 0.1° (P&T) 0.05° (P&T)Motor Type/Drive DC Brush gear motor 1.8° with gear reductionCommunication toPan & TiltCommunication toSensorsN/AN/ARS232/422/485, IP Ethernet:10/100 Base-TRS232/422Control Protocol N/A Moog QuickSet or Pelco DConnectorSpecificationsMaterialsFinish/ColorWeightDimensions See page 4Test Cable andSoftwareMil-Spec grade used on all configurationsMil-Spec grade used on all configurationsHousing 6061-T6 Aluminum, stainless steel hardware, permanently sealedradial ball bearings.White powder coat paint over alodined chromate for corrosion resistance standard.Other colors and CARC available upon request117lbs = analog QPT200122lbs = analog QPT500Mating connector included195 lbs = QPT200/500 ICMS models6 ft test cable and software includedwith all ICS/ICMS configurations, matingconnector and test simulator softwareNote: Test software compatible with Windows-95 SP2, 98, ME, 2000 and XP version. Not compatible with NT.Moog QuickSet control protocol documentation supplied. Different models may vary.2


QPT-200 Dimension & QPT-500 DrawingsDimension DrawingsStandard HousingTOP LOAD FORCE (FT-LBS) *Upright MountingDimensions are in Inches [mm]3650 Woodhead Drive,Northbrook, IL 60062-1895 USA+1.847.498.0700 Fax: +1.847.498.1258www.quickset.comThis product is regulated by the U.S. Export Administration Regulations 15 CFR Parts 730-774, ECCN EAR99, export, disclosure or transfer contrary to U.S. law is prohibited.Form 500-632 0612

More magazines by this user
Similar magazines