1T-CT-570 System - VIDELCO

videlco

1T-CT-570 System - VIDELCO

Key Features 1T-CT-570 System

• Transmit PC & Video content via Fiber

Optic Cable

• PC Resolutions to WUXGA

(1920x1200@16:10)

• HDTV Resolutions to 1080p

(1920x1080@16:9)

• Transmission Ranges to 500 Meters (1,640

Feet)

• Small Footprint and light weight

Key Features 1T-CT-770 System

• Resolutions up to 1080p @ 60Hz

• 1080p Signal Distribution to 30km

(18.6 Miles)

• Signal Re-Clocking is standard

• Supports SMPTE 424M, 292M & 259M

• Data Transfer Rate up to 3Gbps

• 3 Year Warranty

Distributor / Vertrieb:

1T-CT-570 System

DVI Fiber Optic Extender

1T-CT-570 Series DVI Fiber Optic Extender is a high performance system used to transmit PC

and HDTV video at resolutions up to WUXGA and 1080p respectively over distances up to 500

meters (1,640 feet.) Utilizing very small footprints, the 1T-CT-571 Transmitter connects directly to

a PC’s DVI-D connector. The 1T-CT-572 Receiver connects directly to the display device.

Four Fiber Optic cables provide a RF immune, virtually lossless method for transporting the video

signal to a remote location. No adjustments are required and set up consists of simply making

certain that the PC output resolution matches the display device capabilities plus insuring that the

cables are securely and correctly connected.

The Laser system used is a class 1 device for each of the 4 paths and it complies with the

1T-CT-770 System

3G/HD/SD-SDI Over Fiber System

VIDELCO – Professionelle Audio- Video- Medien-Technik!

Tel.: +49 (0)2102 / 86 39-00 • Fax: +49 (0)2102 / 86 39-17 • info@videlco.eu • www.videlco.eu

1T-CT-770 3G/HD/SD-SDI Over Fiber System is used to send 3G/HD/SD-SDI signals to remote

display devices, using a single Fiber Optic cable. The individual components of this 3G/HD/

SD-SDI Extender over Fiber product consists of the 1T-CT-771 Transmitter and the 1T-CT-772

Receiver which constitute a system used to transmit 3G/HD/SD-SDI signals at resolutions up to

1080p. SMPTE 424M (3G SDI) protocols are supported as well as SMPTE 292M (HD-SDI) and

259M (SD-SDI) protocols.

The 1T-CT-770 system can achieve distribution distances of up to 30km (18.6 miles) for signals

with 1080p resolution and 30km (18.6 miles) for signals using 1.485G infrastructure. Input signals

are Re-Clocked which prevents deterioration and allows for reconstitution of the signals at the

receiving end so that output signal characteristics are the same as those present on the input

signal.

Signal Transmission Systems


Video Input

1T-CT-571 Tx 1x DVI via DVI-D

Video Outputs

1T-CT-572 Rx 1x DVI via DVI-D

Fiber Optic I/O

1T-CT-571, 572 1x 4-LC Fiber Optic Connectors

Video Performance

Maximum PC Resolution WUXGA (1920x1200)

Maximum Video Resolution 1080p (1920x1080p)

Video Bandwidth 1.65 Gpbs per channel

Fiber Optic System

Class 1 Laser EN 60825-1

Optical Property 4 Ch., 850nm@-6dBm

Maximum Range

1T-CT-571, 572 System 500 Meters (1,640 feet)

Mechanical (H-W-D)

1T-CT-571, 572 19.6x40x90mm (0.77”x1.6”x3.5”)

Weight

1T-CT-571, 572 65g (0.14 Lbs) Ea.

Video I/O

1T-CT-771 Tx-SDI Input 1x via BNC Connector

1T-CT-772 Rx-SDI Output 1x via BNC Connector

Fiber I/O

1T-CT-771 - Fiber Output 1x via ST Connector

1T-CT-772 - Fiber Input 1x via ST Connector

Fiber Cable Requirement

Single Mode 9/125um or 8/125um

Supported Protocols

Industry Standards SMPTE 424M (3G-SDI), 292M (HD-SDI),

259M (SD-SDI)

Video Performance

Maximum Resolution Up to 1080p/60Hz

Power Budget

Link Power Budget 11dB Minimum

Nominal Signal Level

800 mV/p-p +/- 50 mV

Maximum Range

1T-CT-771/772 System 30km (18.6 Mi) 1080p,

30km (18.6 mi) 1.485G

Control

Interface

Distributor / Vertrieb:

Input Output Input/

Output

Power Requirement

External Supply +5 VDC@1A

Environmental

Operating Temperature -10° to +50° C (+14° to +122° F)

Operating Humidity 10% to 90%, Non-condensing

Storage Temperature -20° to +75° C (-4° to +167° F)

Storage Humidity 10% to 90%, Non-condensing

Warranty

Limited Warranty 3 Years Parts and Labor

Regulatory Approvals

Encoder/Decoder Unit FCC, CE, RoHS

Power Supply UL, CUL, CE, PSE, GS, RoHS

Model Numbers

1T-CT-571 DVI-D Fiber Optic Transmitter

1T-CT-572 DVI-D Fiber Optic Receiver

Accessories Included

2x Power Adapter US, UK or Euro

1x User Manual 1T-CT-570 DVI Extender Series

1T-CT-571 1T-CT-572

5V DC 5V DC

DVI-D DVI-D

Environmental

Operating Temperature -20° to +70° C (-4° to +158° F)

Operating Humidity 5% to 95%, Non-condensing

Storage Temperature -30° to +85° C (-22° to +185° F)

Storage Humidity 5% to 95%, Non-condensing

Warranty

Limited Warranty 3 Years Parts and Labor

Regulatory Approvals

Encoder/Decoder Unit FCC, CE, RoHS

Power Supply PSE, UL, CUL, FCC, CE, PSE, TUV-GS, RoHS

Mechanical

Size (HWD) 19.5x19.5x83mm (.76x.76x3.25”)

Weight 56g (0.12lbs) each

Power Requirement

External Power Supply 5 VDC@1.5A, Locking DC

Accessories Included

2x Power Adapter US, UK or Euro

1x User Manual

Model Number

1T-CT-770 3G/HD/SD-SDI Over Fiber Ext’dr

1T-CT-771 1T-CT-772

3G/HD/

SD-SDI

FIBER

OPTIC

FIBER

OPTIC

5VDC 5VDC

FIBER

OPTIC

VIDELCO – Professionelle Audio- Video- Medien-Technik!

Tel.: +49 (0)2102 / 86 39-00 • Fax: +49 (0)2102 / 86 39-17 • info@videlco.eu • www.videlco.eu

FIBER

OPTIC

3G/HD/

SD-SDI

More magazines by this user
Similar magazines