Brochure - Electrolysis System

Safe and Effective Disinfectionwith Sodium ChlorideHighly productive electrolysis systemswww.promaqua.com

Environmentally-Friendly Water DisinfectionElectrolysis is an economically sensibleand technically perfected alternativeto the dosing of sodium hypochloriteor other disinfectants.Chlorine, hydrogen and sodium hydroxidecan be generated on sitefrom harmless sodium chloride. Thechlorine generated can either bedosed directly into the water as hypochlorousacid (HOCl) or temporarilystored with the sodium hydroxidegenerated as sodium hypochlorite(NaOCl).Simple and safe disinfection withsodium chlorideNo storage, transport or handlingof hazardous chemicalsCost-efficient by economical salt andenergy consumptionChlorine generation andpH correction with one system(CHLORINSITU ® IV plus/compact)Maximum operating reliability thanksto its design as a vacuum pressuresystemCHLORINSITU ® IV plusflow diagramAnode refresherElectrolysis cellHydrogen ventDosing ofCl 2 + NaOH + sodiumhypochloriteWater supplyInjector systemSoftenerSalt dissolvingcontainerStorage containerfor sodiumhydroxideReactor forsodiumhypochloriteStorage containerfor sodiumhypochloriteCHLORINSITU ® electrolysis systemsfrom ProMinent are characterizedby:2High reliability:constantly monitored electrolysis;ATEX-certified ventilation system forremoval of hydrogen produced(systems with an output of > 50 g/h);remote diagnosis by means ofintegrated modemEasy operation:modern controllers monitor all keyfunctions; easy-to-use touch panel(systems with an output of > 50 g/h);integration in central control systemvia different communicationinterfaces as an optionComplete supply:systems are wired ready forconnection including saltdissolvingcontainers and sensorsfor level regulation; systems withan output of > 50 g/h and integrateddosing system have all devicessuch as pressure increasingpumps and injectors ready-fittedwithin the systemCustomized solutions:all standard systems can be adaptedto individual customer requirements;almost any number of dosing pointsfor chlorine, sodium hypochlorite orsodium hydroxide can be incorporatedwww.promaqua.com/en/electrolysis

CHLORINSITU ® IVMembrane Electrolysis SystemsLow-Chloride Disinfectionwith pH Correction.The CHLORINSITU ® IV range of electrolysissystems generates ultra-purechlorine gas in a vacuum process thatis immediately and safely dissolved inwater within the system as hypochlorousacid. The chloride-free sodiumhydroxide is temporarily stored andcan be transferred into the waterthrough the same injector to correctthe pH value. Our system operates inbatch mode to optimise salt and energyconsumption and is particularlysuitable for applications in whichthere is no need for chlorine to becontinuously dosed.Generation and dosing of ultra-purehypochlorous acid and sodiumhydroxideChlorination and pH adjustmentwith one systemNo handling of hazardous chemicalsSafe vacuum pressure technologyCompact, space-saving designCHLORINSITU ® IVType/Outputg/hVoltagesupplyVPowerUptakekWSaltconsumptionkg/hProcesswaterconsumptionl/hCoolingwaterconsumptionl/hDimensionsL x W x H (mm)100 230 1.10 0.2 0.8 – 1,150 x 600 x 1,550 130150 3 x 400 1.30 0.3 1.3 – 1,150 x 600 x 1,550 130200 3 x 400 1.50 0.4 1.7 – 1,150 x 600 x 1,550 200300 3 x 400 1.90 0.6 2.5 – 1,150 x 600 x 1,550 200400 3 x 400 2.30 0.8 3.4 – 1,150 x 600 x 1,550 200500 3 x 400 2.70 1.1 4.2 – 1,150 x 600 x 1,550 200600 3 x 400 3.10 1.3 5.0 – 2,900 x 600 x 2,000 200750 3 x 400 3.70 1.6 6.3 – 2,900 x 600 x 2,000 3801,000 3 x 400 4.70 2.1 8.4 – 2,900 x 600 x 2,000 3801,250 3 x 400 5.70 2.6 11.0 – 2,900 x 600 x 2,000 3801,500 3 x 400 6.70 3.2 13.0 – 2,900 x 600 x 2,000 3801,750 3 x 400 7.70 3.7 15.0 – 3,300 x 600 x 2,000 3802,000 3 x 400 8.70 4.2 17.0 200 3,300 x 600 x 2,000 5202,500 3 x 400 10.70 5.3 21.0 200 3,300 x 600 x 2,000 5203,000 3 x 400 12.70 6.3 25.0 200 3,300 x 600 x 2,000 5203,500 3 x 400 14.70 7.4 29.0 200 3,300 x 600 x 2,000 520Brine tanklwww.promaqua.com/en/electrolysis9

CHLORINSITU ® IV plusMembrane Electrolysis SystemsLow-Chloride Disinfectionwith pH Correction.fore, the system need not be designedto meet its maximum chlorinedemand but can be designed to meetits average daily requirements. Allthree chemicals are dosed through acommon injector system that can alsobe extended to incorporate severaldosing points. Our system is thereforeespecially suitable for swimming poolapplications where several pools canbe simultaneously fed by the sameelectrolysis system.Tailored to a particular requirement inswimming pool applications.No handling of hazardous chemicalsSafe vacuum pressure technologyExcellent water quality with ahigh-performing active agentDisinfection of water and phadjustment with one systemSimple and reliable operating systemCHLORINSITU ® IV plusType/outputg/hVoltagesupplyVPowerUptakekWSaltconsumptionkg/hProcess waterconsumption*l/hCoolingwaterconsumptionl/hDimensionsL x W x H (mm)Brine tank100 230 1.10 0.2 11 – 1,950 x 600 x 1,550 130 150150 3 x 400 1.30 0.3 16 – 1,950 x 600 x 1,550 130 200200 3 x 400 1.50 0.4 22 – 1,950 x 600 x 1,550 200 250300 3 x 400 1.90 0.6 33 – 1,950 x 600 x 1,550 200 400400 3 x 400 2.30 0.8 43 – 1,950 x 600 x 1,550 200 500500 3 x 400 2.70 1.1 54 – 3,700 x 600 x 2,000 200 600600 3 x 400 3.10 1.3 65 – 3,700 x 600 x 2,000 200 700750 3 x 400 3.70 1.6 81 – 3,700 x 600 x 2,000 380 8501,000 3 x 400 4.70 2.1 108 – 3,700 x 600 x 2,000 380 1,1001,250 3 x 400 5.70 2.6 136 – 3,700 x 600 x 2,000 380 1,4001,500 3 x 400 6.70 3.2 163 – 3,700 x 600 x 2,000 380 1,7001,750 3 x 400 7.70 3.7 190 – 3,700 x 600 x 2,000 380 2,0002,000 3 x 400 8.70 4.2 217 200 4,100 x 600 x 2,000 520 2,2002,500 3 x 400 10.70 5.3 271 200 4,100 x 600 x 2,000 520 2,8003,000 3 x 400 12.70 6.3 325 200 4,100 x 600 x 2,000 520 3,3003,500 3 x 400 14.70 7.4 379 200 4,100 x 600 x 2,000 520 3,900lRecommendedcapacitystorage tankl* The process water consumption depends on the ratio between chlorine gas and stock production. Here, the value for a ratio 50 % : 50 % is given.10The CHLORINSITU ® IV plus range ofelectrolysis systems generates ultrapurechlorine gas in a vacuum processthat is immediately and safely dissolvedin water within the system ashypochlorous acid. The chloride-freesodium hydroxide is temporarilystored and can be used to correct theph value of the water. At the sametime, excess chlorine gas is boundwith sodium hydroxide, temporarilystored as sodium hypochlorite andused to cover demand peaks. Therewww.promaqua.com/en/electrolysis