DOC RP700 - First EIE SA

Photoplotter
Perfect
Environement
Control
n Temperature
and Humidity Monitoring
n Geometry Control
n Dust protection
RP700 series
Model 50000 dpi
Vertical High
Capacity
Auto-Loading
System
n 1 X 200 films
n 2 x 150 films
n Maximum film size : 28” x 36”
P E
R C I S
High Throughput
4000 to 50000 dpi • STH Head 512 Beams
I N
O

First EIE SA
The new RP700 line of photoplotters
Technical
RP716
Specifications
RP717
Exposing unit
Raster Image
Processor
User interface
Environment monitoring
Single size integrated
autoloader
Dual size integrated
autoloader
Size and weight
Operating conditions
Optional Film
conveyor C700
Autoloader
Spot size
Selectable resolutions
Exposure speed
(For a 24“ x 20“ plot)
Overall accuracy
Repeatability
Minimum line width
Line width variation
Max. Exposure area
Compatible film lengths
Compatible film widths
Film thickness
Film holding
Drum speed
Exposure device
Light wavelength
Position control
Type
Data input formats
Optional input formats
Network compatibility
Compatible film lengths
Film magazine
Compatible film lengths 1° tray
2° tray
Film magazine
Compatible film widths
Load / unload cycle
Daylight operation
Length x Width x Height
Weight
Temperature
Relative humidity
Power requirements
Compatibility
Length x Width x Height
Weight
Yes
6 µm (0,24 mil)
4 µm (0,16 mil)
4000, 8000, 12000 and 16000 dpi
6µ, 3µ, 2µ and 1,5µ
6000, 12000, 18000 dpi and 24000 dpi
4µ, 2µ, 1.33µ and 1µ
6000, 12000, 18000, 24000 dpi and 48000 dpi
4µ, 2µ, 1.33µ, 1µ and 0,5µ
Minutes at 4000 dpi
Minutes at 6000 dpi
Minutes at 8000 dpi
Minutes at 12000 dpi
Minutes at 16000 dpi
Minutes at 18000 dpi
Minutes at 24000 dpi
Minutes at 48000 dpi
Minutes at 6µm
Minutes at 4µm
Minutes at 3µm
Minutes at 2µm
Minutes at 1,5µm
Minutes at 1.33 µm
Minutes at 1 µm
Minutes at 0,5 µm
± 10 µm (± 0.4 mil)
± 3 µm (± 0.12 mil)
914 x 720 mm (36“ x 28“)
18“, 20“, 24“, 25,5“, 26“, 28“, 30“, 32“ and 36“
Any width larger than 400 mm (16“) up to 720 mm (28’’)
0.18 mm (7 mils)
By vacuum
Variable, up to 100 RPM
One 512 beam STH head with light intensity equalization
Monochromatic red light, 647 nm
Through high resolution encoder & Linear Glass Scale
Built-in, provides “on-the-fly” rasterization
Based on Windows XP and First EIE’s MPS
RS274D, RS274X, EIE RPL and DPF
ODB++, TIFF, PACKBITS, Image 5000. Via third part software: HPGL, DXF
NetBEUI, TCP-IP
Queue Manager Software supporting 30 plot queues.
Each one can be setup with more than 15 different plot parameters
Temperature and humidity recorded for each plot
18“, 20“, 24“, 25.5“, 26“, 28’’, 30“, 32“ and 36“
Up to 200 films
18“, 20“, 24“, 25.5“, 26“, 28’’, 30“, 32“ and 36“
18“, 20“, 24“, 25.5“ and 26“
Up to 150 films per each tray
Any width larger than 400 mm (16“) up to 720 mm (28“)
35 / 25 sec. for maximum film size
Yes, except during film refill and removal
1450 x 870 x 1400 mm
(57“ x 34,3“ x 55,1“)
620kg (1395 Ibs) including autoloader
20 ± 2° C
45% ± 3%
230 VAC ± 10%, 1400 W including vacuum pump
Compatible with most film processors
880 x 760 x 140 mm (34.6“ x 29,9“ x 5.5“)
41 kg (92 Lbs)
FOR IMPERIAL MODE
FOR METRIC MODE
25 µm (1 mil) at 4 µm (4000 dpi)
17 µm (0.67 mil) at 3 µm (6000 dpi)
12 µm (0,47 mil) at 1,5 µm (16000 dpi)
8 µm (0,3 mil) at 1 µm (24000 dpi)
Bellow 8 µm (0,2 mil) at 0,5 µm (48000 dpi)
Less than 3 lµm peak to peak below 12000 dpi
About 2 µm peak to peak at 12000 dpi and above
First EIE SA • Chemin de la Gravière 2 • 1227 Genève-Acacias • Switzerland
Tel. + 41 22 307 06 30 • Fax + 41 22 342 81 72 • www.firsteie.com • sales@firsteie.com
•
•
•
•
•
•
•
OPTION
OPTION
•
•
•
•
•
•
•
RP724
RP725
•
•
•
•
•
•
•
OPTION
OPTION
•
•
•
•
RP716 RP724
2,1
2,6
3,2
7,2 7,2
12,4
15,9
28,8
2,2
3,4
8,0
14,0
•
•
•
•
•
•
•
•
RP717 RP725
2,8
8,0
18,0
32,3
•
•
•
•
•
RP748
RP750
•
•
•
•
•
•
•
•
OPTION
OPTION
•
•
•
•
•
•
•
RP748
2,6
7,2
15,9
28,8
58,0
RP750
2,8
8,0
18,0
32,3
65,0
•
•
•
•
•
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
© 04 2009 First EIE SA