RMF SERIES 19" FREE STANDING RACKS - Conteg

conteg.com
  • No tags were found...

RMF SERIES 19" FREE STANDING RACKS - Conteg

CONTEG DATA SHEETRMF SERIES19" FREE STANDING RACKS


The RMF unassembled rack is designed to cope with the demanding needs of IT equipment withinthe data center, equipment room and network or telecommunications closet. The RMF’s flexibleconfiguration options mean that it’s easy to tailor the solution to your exact requirements. Various height,depth and width options, along with load rating of 400kg, air-flow optimization solutions and flexible cablemanagement mean that it has never been simpler to custom configure a cabinet that meets your requirements.The RMF rack is delivered unassembled for easy transportation into the site where it can be quickly and easilyconstructed.COLOR SAMPLER:DESCRI PTIONSizes• Height: 21, 33, 42, and 45U• Width: 600 and 800mm• Depth: 600, 800,1000mmConstruction• Robust frame construction, connected by 24(32) M6x12 screws• Delivered unassembled; assembly atinstallation site• Easy and quick assembly• 1.5 & 2.0mm sheet steelLoad rating• Standard 400kgIP rating• Standard IP30• Optionally IP54• IP20 when perforated doors usedColors• Standard RAL 7035, RAL 9005 andRAL 7035/7040• Optionally other colorsFront door• Door with swivel handle lock and tintedsecurity glass• Wide range of doors and locks availableoptionally• Reversible door - easy re-hanging to open onright or left (at installation site)• Door opening angle 180˚Rear panel• Removable rear panel with lock• Wide range of rear doors available optionallySide panels• Removable with locksCable entries• Top, bottom, and rear openings for cableentry covered with removable blank panelsVentilation unit openings• Ventilation unit can be installed in top orbottom frameFeet• Adjustable feet as standard;• Castors, Lockable Castors, Plinth or Plinth withfilter optionallyOther• Racks can be installed in blocks by using DP-DR-7 (ordered separately)• GND/earthing kit includedRMF-42-80/80


STANDARD EQUIPMENT1 Front frame2 Rear frame3 Top cover4 Bottom cover5 Holders of vertical extrusions6 2 pairs of 19" vertical extrusions7 Front glass door with swivel handle lock8 Divided rear panel with cable entry and lock9 1 pair of side panels with lock10 Adjustable feet11 Blank panels for top and bottom openings- GND/earthing kit- 28 mounting kitsOPTIONAL EQUIPMENT12 Door with perforation13 Sheet steel door14 Side panels with perforation15 Plinth16 Plinth with filter17 Castors18 Perforated gland plate19 Ventilation unit20 Connecting kit with filter for ventilation unit21 Vented door22 Glass door with side perforation23 Vertically divided sheet steel door *24 Vertically divided perforated sheet steel door *25 Vertically divided vented door *26 Vertically divided glass door with perforation *27 Vertically divided glass door *28 Rear panel (single piece)29 Perforated rear panel (single piece)* not available for 600mm wide racks, requires multipoint lock


STEP 2: REAR FRAME CONFIGURATION134HEIGHTCodeHeightin UREAR PANEL / DOOR OPTIONSCode Options0 Without door 1G Glass doorS Sheet steel doorP Perforated sheet steel door 2T Glass door with side perforation 3W Vented door (perforation rate 83%) 2A Vertically divided glass door 4 *B Vertically divided glass door with side perforation 6 *C Vertically divided sheet steel door 4 *D Vertically divided perforated sheet steel door 5 *F Vertically divided vented door (perf. rate 83%) 5 *Y Rear panel, single piece (no cable entry)R Rear panel, divided, with cable entryZ Perforated rear panel, single (no cable entry)1no IP protection2IP20 max.3IP30 max.4multipoint lock only5multipoint lock only, IP20 max.Externalheightin mm21 21 105533 33 158842 42 198845 45 2121REAR PANEL / DOOR LOCKCode OptionsA Standard swivel handle, universal keyB Standard swivel handle, universal key, multipointC Standard swivel handle, keyed differentD Standard swivel handle, keyed different, multipointG Swivel handle with combination lock and universal keySwivel handle with combination lock and universal key,HmultipointI Swivel handle with profile half cylinder, universal keySwivel handle with profile half cylinder, universal key,JmultipointK Swivel handle with profile half cylinder, keyed differentSwivel handle with profile half cylinder, keyed different,LmultipointU Lock for rear panel, universal keyX Lock for rear panel, keyed different25WIDTHCode Width in mm60 60080 8006multipoint lock only, IP30 max.7Lock code U or X only8Lock code U or X only, IP20 max.*racks 800mm wide onlyCOLORCode NoteB RAL 7035 (light grey)H RAL 9005 (black)E RAL 7035/7040STEP 3: SIDE PANELSCONFIGURATION1234HEIGHTCodeHeightin UExternal heightin mm21 21 105533 33 158842 42 198845 45 2121DEPTHCodeSIDE PANEL WITH LOCKS (BOTH SIDES)Code OptionsC 2 side panels, sheet steel, keyed differentE 2 side panels, sheet steel with perforation, universal keyG 2 side panels, sheet steel with perforation, keyed differentCOLORCodeBHDepthin mmUseful depthin mm60 600 59080 800 790100 1000 990NoteRAL 7035 (light grey)RAL 9005 (black)An example of the correct product codeAn example of the correct product codeSTEP 4: COVERS CONFIGURATION1WIDTHCode Width in mm60 60080 8002DEPTHCodeDepthin mmUsefuldepthin mm60 600 59080 800 790100 1000 99033. COLORCode ExplanationB RAL 7035 (light grey)H RAL 9005 (black)D RAL 7040IP 54 PROTECTIONOrdering codes of IP54ready components uponrequestAn example of the correct product codeAll types of vented doors require multi-pointlock. RMF racks compatible with side, wall, andrear mount cooling (always use RMF-BRACE).Please use RHF/RDF/RSF racks for top mountcooling.

More magazines by this user
Similar magazines