BROCADE IP PRIMER

Chapter Review Questions3. By default, a link's cost is calculated by:a. 100 divided by the maximum bandwidth of the link in Mbpsb. 10,000 divided by the maximum bandwidth of the link in Mbpsc. 100 divided by the maximum bandwidth of the link in bits per secondd. 10,000 divided by the maximum bandwidth of the link in bits persecond4. Which area is referred to as the Backbone?a. Area 1b. Area 0c. Area 10d. Area 515. By default, how often will an OSPF router send Hello packets to itsneighbor?a. 2 secondsb. 4 secondsc. 10 secondsd. 30 seconds6. Which router states describe the Adjacency Process?a. Ex-Start, Exchange, Fullb. 2 Way, Ex-Start, Exchangec. Down, Init, 2 Wayd. Init, Exchange, Full7. Which describes a Not So Stubby Area (NSSA)?a. This area will not receive routes outside of the Autonomous Systemb. This area will not receive routes outside of its own areac. This area will not receive routes outside of the Autonomous Systemfrom Area 0d. A and B8. An ASBR is:a. A router that participates in more than one routing protocolb. A router with interfaces participating in more than one areac. A router with the highest priorityd. A router with the highest Router IDBrocade IP Primer 259