Maxim Lighting CounterMax and StarStrand Brochure

MX-L120DC SERIES LED Under Cabinet LightingWith a sleek profile and direct wiring, this fully dimmable stateof-the-artLED under cabinet light, powered by 3000 K LEDmanufactured by CREE , easily installs under the cabinet andemits a crisp white light which illuminates without shadows. Thehinged top gives easy access for installation and wiring. Cabinetsstay cool and safe with LED light output.Features:• Warm white 3000 K light• Cool to touch• CRI 85, 120° beam spread• 50,000 life hours• Multiple, full size knock outs• Dimmable using a Lutron C.L TM dimmer• Linkable with or without cord using MXInterLink4CounterMax ® MX-L120DCuses LED made by13" 4-Light LED Under Cabinet89913MB Metallic Bronze89913SN Satin Nickel89913WT White13"L x 4"W x 1"H9.76w471 Rated Lumens7" 2-Light LED Under Cabinet89912MB Metallic Bronze89912SN Satin Nickel89912WT White7"L x 4"W x 1"H4.88w200 Rated LumensMetallic BronzeSatin Nickel21" 6-Light LED Under Cabinet89914MB Metallic Bronze89914SN Satin Nickel89914WT White21"L x 4"W x 1"H14.93w715 Rated LumensWhite30" 8-Light LED Under Cabinet89916MB Metallic Bronze89916SN Satin Nickel89916WT White30"L x 4"W x 1"H19.52w964 Rated LumensMXInterLink4 Direct Wire Box87885WT White87885BK Black5”W x 1"H x 2.25"LMXInterLink4 Power Cord87880WT White87880BK Black72”Plastic Wire Clip53255.5”W x .25"H x 1"LMXInterLink4 Connector Cord9” 87876WT White 24” 87878WT White9” 87876BK Black 24” 87878BK Black18” 87877WT White18” 87877BK Black3

MX-X12-LX SERIES 12V Xenon Under Cabinet LightingStrength, durability and beautiful finish are features that set theCounterMax MX-X12-LX Series apart with its extruded aluminumhousing. These xenon under cabinet lights conceal long-lasting, lowvoltageXelogen bulbs that distribute a crisp bright light. Hinged topsallow for convenient bulb replacement, and push-in wire connectorsin the junction box make either direct wire or plug-ininstallation quick and simple.Features• Airflow design keeps cabinets cool• Hi-Low-Off adjustable light level switch• Linkable without or with cord using MXInterLink4• 12V, long lasting Xelogen bulbs included• Strong and durable extruded aluminum housing• Captured screws for quick and easy installationBrushed AluminumAnodized BronzeWhiteStarter Kit Includes• One MXInterLink4 Direct Wire Box• One MXInterLink4 Connector Cord7" 1-Light 12V Xenon Starter Kit87459AL Brushed Aluminum87459BRZ Anodized Bronze87459WT White7"L x 5"W x 1"H1 x 18w Xenon Bulb (Included)264 Rated Lumens13" 2-Light 12V Xenon Starter Kit87461AL Brushed Aluminum87461BRZ Anodized Bronze87461WT White13"L x 5"W x 1"H2 x 18w Xenon Bulbs (Included)528 Rated Lumens21" 3-Light 12V Xenon Starter Kit87462AL Brushed Aluminum87462BRZ Anodized Bronze87462WT White21"L x 5"W x 1"H3 x 18w Xenon Bulbs (Included)729 Rated Lumens30" 4-Light 12V Xenon Starter Kit87463AL Brushed Aluminum87463BRZ Anodized Bronze87463WT White30"L x 5"W x 1"H4 x 18w Xenon Bulbs (Included)1056 Rated LumensA D D - O N SA C C E S S O R I E SMXInterLink4 Connector Cord24" 87878WT White24" 87878BK Black18" 87877WT White18" 87877BK Black9" 87876WT White9" 87876BK Black7" 1-Light 12V Xenon Add-On87449AL Brushed Aluminum87449BRZ Anodized Bronze87449WT White7"L x 5"W x 1"H1 x 18w Xenon Bulb (Included)264 Rated Lumens21" 3-Light 12V Xenon Add-On87452AL Brushed Aluminum87452BRZ Anodized Bronze87452WT White21"L x 5"W x 1"H3 x 18w Xenon Bulbs (Included)729 Rated Lumens13" 2-Light 12V Xenon Add-On87451AL Brushed Aluminum87451BRZ Anodized Bronze87451WT White13"L x 5"W x 1"H2 x 18w Xenon Bulbs (Included)528 Rated Lumens30" 4-Light 12V Xenon Add-On87453AL Brushed Aluminum87453BRZ Anodized Bronze87453WT White30"L x 5"W x 1"H4 x 18w Xenon Bulbs (Included)1056 Rated LumensMXInterLink4 Power Cord87880WT White87880BK Black72"LMXInterLink4 Direct Wire Box87885WT White87885BK Black2.25"L x 5"W x 1"HPlastic Wire Clip53255.5”W x .25"H x 1"L6

MX-X120 SERIES 120V Xenon Under Cabinet LightingWith a sleek profile and direct wiring, this unit installs easily under thecabinet and emits a warm light. The hinged top gives easy access tothe long-lasting Xenon bulbs and wiring. Cabinets stay cool and safedue to the unique airflow design that limits heat transfer.Features• Xenon 120V• Multiple, full-size, 1/2” knock outs• Push–in wire connectors• Direct wire installationBronzeWhite40” 5-Light 120V Xenon87834WT White87834MB Bronze40”L x 5”W x 1.25”H5 x 20w Xenon Bulb (Included)1125 Rated Lumens7” 1-Light 120V Xenon87830WT White87830MB Bronze7”L x 5”W x 1.25”H1 x 20w Xenon Bulb (Included)225 Rated Lumens13” 2-Light 120V Xenon87831WT White87831MB Bronze13”L x 5”W x 1.25”H2 x 20w Xenon Bulb (Included)450 Rated Lumens21” 3-Light 120V Xenon87832WT White87832MB Bronze21”L x 5”W x 1.25”H3 x 20w Xenon Bulb (Included)675 Rated Lumens30” 4-Light 120V Xenon87833WT White87833MB Bronze30”L x 5”W x 1.25”H4 x 20w Xenon Bulb (Included)900 Rated Lumens9

This direct wire collection of fluorescent under cabinet lights boasts T-5high lumen technology in sizes from 12” to 43” in length. Full size knockouts allow for easy installation in any application.MX-FD SERIES Direct Wire Fluorescent Under Cabinet LightingFeatures• T-5 high lumen technology• 3100 K color temperature• Full size knock outs• Long life fluorescent lamps5”5”12”21”12” 1-Light Fluorescent87805WT White12”L x 5”W x 1.25”H1 F8 T5 (Included) | 400 Lumens | 7,500 Hours21” 1-Light Fluorescent87806WT White21”L x 5”W x 1.25”H1 F13 T5 (Included) | 870 Lumens | 7,500 Hours5”5”24”24” 1-Light Fluorescent87807WT White24”L x 5”W x 1.25”H1 F16 T5 (Included) | 1360 Lumens | 7,500 Hours43” 1-Light Fluorescent87809WT White43”L x 5”W x 1.25”H1 F26 T5 (Included) | 2700 Lumens | 7,500 Hours43”10

MX-LD-R SERIES LED DiscsThe versatile CounterMax MX-LD-R LED disc features two piece aluminum construction that allows for both surface mountingor recessed installation. Each disc operates at a fraction of the cost of halogen or xenon discs by consuming less than 1 watt ofelectricity and being cool to the touch. This combination of safety and energy efficiency make the CounterMax MX-LD-R seriesthe smart choice for disc lighting.Features:• Surface or recessed installation• Available in a White, anodized Aluminum or anodized Bronze finish• Warm white 3000 K color temperature• 12V low voltage lighting system• Two piece aluminum construction• Frosted diffuser• Up to six discs can be on a single driver• Installation hardware included• White 36" connecting cord for White discs, black 36" connecting cord for Aluminum and Bronze discsStarter Kit Includes:• Three CounterMax MX-LD-R discs• One 6-outlet distributor with 48" input cord and mounting tabs• One 110V/220V input, 12V 2A output driver with 72" output cord• Installation hardwareAnodized BronzeStarter Kit53853AL Brushed Aluminum53853BRZ Anodized Bronze53853WT WhiteEach Disc 2.75"W x .5"HEach Disc: 1 x .6w LED (Included)660 Total Rated LumensBrushed AluminumWhiteDistributor3.25"L x 1"W x .5"HDriver1.2"D x 1.75"W x 3.25"H11

MX-LD-R SERIES LED Discs3000 K Warm White36”72”108”88lux22lux10luxAngular Displacement Degree.5"2.75"Add On Pucks53850AL Brushed Aluminum53850BRZ Anodized Bronze53850WT White2.75"W x .5"H1 x .6w LED (Included)220 Rated LumensRecessedSurfaceMotion Sensor53812BK Black1"D x 2.25"L x 1.15"W• Turns CounterMax MX-LD-R system on and off by infrared sensor• Once the sensor, with a range of 20', detects motion through body heat, it will turn the system on• After 15 minutes of no motion detected, the sensor will turn the system off.• Installed between driver and distributor• Includes one 6" input cord and two 24" output cordsTouch Dimmer53811WT White53811BK Black3"L x 1.2"W x .6"H• Dims CounterMax MX-LD-R system and turns the system on or off• A tap turns the system on or off, a continuous hold for full range dimming.• Installed between driver and distributor• Includes one 10" input cord and one 45" output cordExtension CordsUsed to extend distance between distributor and LED disc.A maximum of 84" can be used between distributor and an LED disc.24" 53807WT White24" 53807BK Black48" 53809WT White48" 53809BK BlackPlastic Wire Clip53255.5”W x .25"H x 1"L12

MX-LD SERIES LED DiscsMaxim LED discs mount easily under any cabinetand can link up to 30 discs without additionalhardware. The energy efficient LED disc usesonly 1.7 watts, requires no additional driver, andstays cool to the touch making it safer than bothhalogen and xenon. The warm white color lastslong and compliments any room.Features• Easy to install• 3.125” diameter x .875 height• 1.7 watts per disc• Cool to the touch olycarbonatehousing• 3500 K color temperature• Requires no additional driver• Expand up to 30 discs3-Light Disc Kit87883WT White87883SV Silver87883BK Black5.1w Total390 Rated LumensKit Includes:> Three MX-LD LED Discs> On/Off Switch> Installation Hardware> One 72” MXInterLink2 Power Cord> Two 18” MXInterLink2 CordsSilverWhite AccessoriesWhiteWhite AccessoriesBlackBlack Accessories13

MX-LD SERIES LED Discs1-Light Disc Add-On87881WT White87881SV Silver87881BK Black3.125”W x .875”H1 x 1.7w130 Rated LumensIncludes One 18” MXInterLink2 Cordand Installation HardwareO P T I O N A LC O M P O N E N T SMXInterLink2 Power Cord87817WT White87817BK Black72”LMXInterLink2 Coupler87820WT White87820BK Black2”W x .375”H x .5”LMXInterLink2 Connector Cord18” 87819WT White18” 87819BK Black9” 87818WT White9” 87818BK BlackMXInterLink2 Cord Coupler87823WT White87823BK Black2.125”W x .375”H x .625”LMXInterLink2 Direct Wire Box87803WT White87803BK Black4”W x 1”H x 2”LPlastic Wire Clip53255.5”W x .25"H x 1"L14

MX-LMC SERIES LED Mini ChannelCounterMax MX-LMC LED mini channel is designed for illuminating drawers and cabinets. At just over 1/4" wide it is as easyto conceal as it is to install. Both flat and 45° angle mounting clips are included and provide for easy do-it-yourself installation.The channel is aluminum and is finished in a rich anodized Bronze which coordinates well with most wood finishes. Theoptical lens focuses the light where needed and the warm white 3000 K LED provides ample light without heat, and isefficient in consuming only 2w per foot. Optional motion sensor allows for automatic control, perfect for cabinet installation.Starter Kit53800BRZIncludes:• Four 10" CounterMax MX-LMC LED mini channels• One 110V/220V input, 12V 2A output driver with 72” output cord• One 4" power supply cord• Two 2" connecting cords• Eight flat mounting clips• Eight 45° angle mounting clips• Mounting Screws• End CapsStarter Kit53802BRZIncludes:• Four 16.5" CounterMax MX-LMC LED mini channels• One 110V/220V input, 12V 2A output driver with 72" output cord• One 4" power supply cord• Two 2" connecting cords• Eight flat mounting clips• Eight 45° angle mounting clips• Mounting Screws• End Caps15

MX-LMC SERIES LED Mini Channel.37"Add-On Kit53804BRZOne Add-On kit can be used with either starter kit and Includes:• Two 10" CounterMax MX-LMC LED mini channels• Two 5" CounterMax MX-LMC LED mini channels• Eight flat mounting clips• Eight 45°angle mounting clips• Mounting Screws.35".37"Connecting CordDriverConnecting Connecting Cord CordPower Supply CordDriver DriverLength5"10"16.5"Diodes WattagePower Power Supply Supply Cord Cord120.96241.92423.36Lumens65130227Beam70°70°70°Voltage12V12V12VColor Temp.3000 K3000 K3000 KMotion Sensor53812BK Black1"D x 2.25"L x 1.15"W• Turns CounterMax MX-LMC system on and off by infrared sensor• Once the sensor, with a range of 20', detects motion through body heat, it will turn the system on• After 15 minutes of no motion detected, the sensor will turn the system off.• Installed between driver and distributor• Includes one 6" input cord and two 24" output cordsTouch Dimmer53811WT White53811BK Black3"L x 1.2"W x .6"H• Dims CounterMax MX-LMC system and turns the system on or off• A tap turns the system on or off, a continuous hold for full range dimming.• Installed between driver and distributor• Includes one 10" input cord and one 45" output cordPlastic Wire Clip53255.5”W x .25"H x 1"L16

SERIES DETAILSSeriesItemMeasurementsLampingLumensColorTempLifeHoursInstallationReplacementBulb878055''W x 1.25''H x 12''L1 x 8w Mini Bi Pin T540031007500DWBUFT508011MX-FD87806878075''W x 1.25''H x 21''L5''W x 1.25''H x 24''L1 x 13w Mini Bi Pin T51 x 16w Mini Bi Pin T587013603100310075007500DWDWBUFT513012BUFT516013878095''W x 1.25''H x 43''L1 x 26w Mini Bi Pin T5270031007500DWBUFT526015879022''W x 1''H x 10''L2 x 1w LED160300050000CP2, DW2, IL2MX-L879042''W x 1''H x 20''L4 x 1w LED320300050000CP2, DW2, IL2879062''W x 1''H x 30''L6 x 1w LED480300050000CP2, DW2, IL2899124''W x 1''H x 7''L4.88w LED200300050000DW, CP4, DW4, IL4MX-L120DC89913899144''W x 1''H x 13''L4''W x 1''H x 21''L9.76w LED14.93w LED471715300030005000050000DW, CP4, DW4, IL4DW, CP4, DW4, IL4899164''W x 1''H x 30''L19.52w LED964300050000DW, CP4, DW4, IL4MX-LDSingle Disc3.125''W x 0.875''H24 x .07w LED130350030000CP2, DW2, IL2MX-LD-RSingle Disc2.75''W x .5''H1 x .6w LED220300030000CP899413''W x 0.55''H x 12''L9.89w LED461300050000CP5, DW5, IL5MX-L-LPC899423''W x 0.55''H x 18''L14.74w LED640300050000CP5, DW5, IL5899433''W x 0.55''H x 24''L18.97w LED903300050000CP5, DW5, IL55" Section.37"W x .35"H x 5"L12 x .08w LED65300030000CPMX-LMC10" Section.37"W x .35"H x 10"L24 x .08w LED130300030000CP16.5" Section .37"W x .35"H x 16.5"L42 x .08w LED227300030000CP87849/878595''W x 1.125''H x 7''L1 x 18w Wedge T5 Xelogen264280010000CP3, DW3, IL3BUX20023MX-X1287851/8786187852/878625''W x 1.125''H x 13''L 2 x 18w Wedge T5 Xelogen5''W x 1.125''H x 21''L 3 x 18w Wedge T5 Xelogen528792280028001000010000CP3, DW3, IL3CP3, DW3, IL3BUX20023BUX2002387853/878635''W x 1.125''H x 30''L 4 x 18w Wedge T5 Xelogen1056280010000CP3, DW3, IL3BUX2002317

SERIES DETAILSSeriesItemMeasurementsLampingLumensColorTempLifeHoursInstallationReplacementBulb878305''W x 1.25''H x 7''L1 x 20w G822529003500DWBUX20016878315''W x 1.25''H x 13''L2 x 20w G845029003500DWBUX20016MX-X120878325''W x 1.25''H x 21''L3 x 20w G867529003500DWBUX20016878335''W x 1.25''H x 30''L4 x 20w G890029003500DWBUX20016878345''W x 1.25''H x 40''L5 x 20w G8112529003500DWBUX20016878405''W x 1.25''H x 7''L1 x 20w G822529003500DW, CP3, DW3, IL3BUX20016878415''W x 1.25''H x 13''L2 x 20w G845029003500DW, CP3, DW3, IL3BUX20016MX-X120c878425''W x 1.25''H x 21''L3 x 20w G867529003500DW, CP3, DW3, IL3BUX20016878435''W x 1.25''H x 30''L4 x 20w G890029003500DW, CP3, DW3, IL3BUX20016878445''W x 1.25''H x 40''L5 x 20w G8112529003500DW, CP3, DW3, IL3BUX2001687449/874595''W x 1''H x 7''L1 x 18w Wedge T5 Xelogen264280010000CP4, DW4, IL4BUX20023MX-X12-LX87451/8746187452/874625''W x 1''H x 13''L5''W x 1''H x 21''L2 x 18w Wedge T5 Xelogen3 x 18w Wedge T5 Xelogen528729280028001000010000CP4, DW4, IL4CP4, DW4, IL4BUX20023BUX2002387453/874635''W x 1''H x 30''L4 x 18w Wedge T5 Xelogen1056280010000CP4, DW4, IL4BUX20023Cord and PlugCP - Cord/PlugCP2 - MXInterLink2 Cord/PlugCP3 - MXInterLink3 Cord/PlugCP4 - MXInterLink4 Cord/PlugCP5 - MXInterLink5 Cord/PlugDirect WireDW - Direct WireDW2 - MXInterLink2 Direct Wire BoxDW3 - MXInterLink3 Direct Wire BoxDW4 - MXInterLink4 Direct Wire BoxDW5 - MXInterLink5 Direct Wire BoxLink ConnectorIL2 - MXInterLink2 Connector CordIL3 - MXInterLink3 Connector CordIL4 - MXInterLink4 Connector CordIL5 - MXInterLink5 Connector Cord18

StarStrand Ultima Star 24Features• Highest StarStrand lumen light output• Long runs up to 100 feet• Plastic covered to reduce static failure• Multiple lengths with soldered connectors fortrouble free installation• UL approved for damp locations• Highly flexible material that is backed with3M adhesive tape for easy installation• Field cuttable every 4 inchesApplications• Office task lighting• Under cabinet lighting• Closets• Work areas• Display counters• Steps and railings0.65”CUT LINECUT LINE0.492” 0.11”4”CUT LINECUT LINECuttableevery 4 inchesItem Length Diodes Wattage Lumens Color Temp CRI PC Board Beam Voltage5345053451534555345253453534544"12"20"60"120"240"61830901803601.233.76.1718.53774852544231270254050803500 K3500 K3500 K3500 K3500 K3500 K70-7570-7570-7570-7570-7570-75WhiteWhiteWhiteWhiteWhiteWhite120°120°120°120°120°120°24V24V24V24V24V24VCurrent51mA154mA257mA771mA1.5A3.1AModel Number53311 , 53313 , 553185328653314532875328853289Wattage60 Watts96 Watts100 Watts150 Watts320 Watts480 WattsMaximum Run13'22'22'32'50'50'Maximum Run Using2 Output Cords........................70'100'Wiring Diagram1111............3500 K 120ºDistance Foot Candles12in 51.4724in 14.4736in 6.65Wiring Diagram on page 4548in3.85Shown using 1 foot section of Ultima Star 2419

StarStrand Ultima Star 246-Pin 4-Way Connector53350 1.5"L x 1.5"W x .25"H• Creates a power block for branchingbetween Ultima Star 24, 24V Driveror 24V Dimming Controller• Includes two 6-Pin Male End Capsand one 6-Pin Male/Male AdapterPlastic Wire Clip53255 1"L x .5"W x .25"H• Secures to surface connecting cordsand input/output cords of drivers andcontrollers• Backed with 3M adhesive• Package of 1024V Dimming Controller53393 5"L x 2.5"W x 1"H• Full range dimming and on/off• RF remote included• Installs between 24V Driver and Ultima Star 24• 4" 6-Pin power input cord, 72" 6-Pin signaloutput cord• Compatible with drivers 53313 and 533186-Pin Rough-In Terminal Block53258 4"L x .75"W x .5"H• Rough in for new installation constructionbetween Ultima Star 24,24V Driver or 24V Dimming Controller• Female connector on one end with two wirequick connector on opposite end• Includes one 6-Pin Male/Male Adapterand installation screw6-Pin Connecting Cords53465 5"L x .75"W x .25"H53467 13"L x.75"W x .25"H53468 73"L x .75"W x .25"H• Extend distance between Ultima Star 24,24V Driver or 24V Dimming Controller6-Pin Mounting Clip53273 .5"W x .25"H x .5"L• Use on irregular surfaces whenadhesive backing is not sufficient• Recommended interval is every 12"• Package of 206-Pin 90° Connector53464 1.25"L x 1.25"W x .25"H• For 90° corners• Reversible for left or right• Includes 3M adhesive for easy mounting6-Pin Silicone End Cap53469 .75"L x .5"W x .1"H• Placed on run termination• Protects against dust and damage• Package of 10Flexible Aluminum Channel6-Pin Male/Male Adapter53254 36"L x .5"W x .6"H• Creates valance to conceal tape• Irregular surfaces installation• Includes screws for installation53342 .5"L x .5"W x .25"H• Changes female end to male• Package of 6Heat Shrink Wrap6-Pin Male End Cap53256 3"L x 1"W x .25"H• Secure connections when in walls• Waterproof for damp locations• Heat gun required for installation• Package of 10E53344 .5"L x .5"W x .25"H• Placed on female end of run termination• Protects against dust nad damage• Package of 66-Pin Male ExtenderDrivers(See page 41-42 for detailed driver information)24V 60w Class II Dimmable Driver24V 60w Plug-In Driver24V 60w Class II Driver24V 96w Class II Driver5331153313533185328653341 .5"L x .5"W x .25"H• Used to connect 6-Pin 4-Way Connector to 6-PinConnecting Cords and the 6-Pin output cords on24V drivers and 24V Dimming Controller• Package of 6• One included with 5335053314532875328853289Adjustable 6-Pin Connector53462 1.18”W x .25”H x 2.3”L• Used for irregular turns on a flat surface• Adjusts from 90° to 180°• Great for radius turn alcoves24V 100w Class II Dimmable Driver24V 150w Driver24V 320w Driver24V 480w Driver20

StarStrand Elite Star 24Features• High lumen light output• Long runs up to 150 feet• Plastic covered to reduce static failure• Multiple lengths with soldered connectors fortrouble free installation• UL approved for damp locations• Highly flexible material that is backed with3M adhesive tape for easy installation• Field cuttable every 4 inchesApplications• Cove and toe kick accent lighting• Outdoor covered porch and patio• Under cabinet lighting• Step lighting• Restaurants and lounges• Boats and RV0.65”CUT LINECUT LINE0.492” 0.11”4”CUT LINECUT LINECuttableevery 4 inchesItemLengthDiodesWattageLumensColor TempCRIPC BoardBeamVoltageCurrent53430534315343253433534344"12"60"120"240"618901803600.92.713.5275443130650130026003500 K3500 K3500 K3500 K3500 K70-7570-7570-7570-7570-75BlackBlackBlackBlackBlack120°120°120°120°120°24V24V24V24V24V38mA113mA563mA1.1A2.3AModel NumberWattageMaximum RunMaximum Run Using2 Output CordsWiring Diagram53311, 53313, 53318532865331453287532885328960 Watts96 Watts100 Watts150 Watts320 Watts480 Watts20'33'33'50'75'75'........................105'150'1111............3500 K 120ºDistance Foot Candles12in 23.7824in 6.7736in 3.12Wiring Diagram on page 4548in1.83Shown using 1 foot section of Elite Star 2421

StarStrand Elite Star 246-Pin 4-Way Connector24V Dimming Controller53350 1.5"L x 1.5"W x .25"H• Creates a power block for branchingbetween Elite Star 24, 24V Driver or24V Dimming Controller• Includes two 6-Pin Male End Capsand one 6-Pin Male/Male Adapter53393 5"L x 2.5"W x 1"H• Full range dimming and on/off• RF remote included• Installs between 24V Driver and Elite Star 24• 4" 6-Pin power input cord, 72" 6-Pin signaloutput cord• Compatible with drivers 53313 and 53318Plastic Wire Clip6-Pin Rough-In Terminal Block53255 1"L x .5"W x .25"H• Secures to surface connecting cordsand input/output cords of drivers andcontrollers• Backed with 3M adhesive• Package of 1053258 4"L x .75"W x .5"H• Rough in for new installation constructionbetween Elite Star 24, 24V Driveror 24V Dimming Controller• Female connector on one end with two wirequick connector on opposite end• Includes one 6-Pin Male/Male Adapterand installation screw6-Pin Connecting Cords53465 5"L x .75"W x .25"H53467 13"L x.75"W x .25"H53468 73"L x .75"W x .25"H• Extend distance between Elite Star 24,24V Driver or 24V Dimming Controller6-Pin Mounting Clip53273 .5"W x .25"H x .5"L• Use on irregular surfaces whenadhesive backing is not sufficient• Recommended interval is every 12"• Package of 206-Pin 90° Connector53464 1.25"L x 1.25"W x .25"H• For 90° corners• Reversible for left or right• Includes 3M adhesive for easy mounting6-Pin Silicone End Cap53469 .75"L x .5"W x .1"H• Placed on run termination• Protects against dust and damage• Package of 10Flexible Aluminum Channel6-Pin Male/Male Adapter53254 36"L x .5"W x .6"H• Creates valance to conceal tape• Irregular surfaces installation• Includes screws for installation53342 .5"L x .5"W x .25"H• Changes female end to male• Package of 6Heat Shrink Wrap6-Pin Male End Cap53256 3"L x 1"W x .25"H• Secure connections when in walls• Waterproof for damp locations• Heat gun required for installation• Package of 10E53344 .5"L x .5"W x .25"H• Placed on female end of run termination• Protects against dust nad damage• Package of 66-Pin Male Extender53341 .5"L x .5"W x .25"H• Used to connect 6-Pin 4-Way Connector to 6-PinConnecting Cords and the 6-Pin output cords on24V drivers and 24V Dimming Controller• Package of 6• One included with 53350Adjustable 6-Pin Connector53462 1.18”W x .25”H x 2.3”L• Used for irregular turns on a flat surface• Adjusts from 90° to 180°• Great for radius turn alcovesDrivers(See page 41-42 for detailed driver information)24V 60w Class II Dimmable Driver24V 60w Plug-In Driver24V 60w Class II Driver24V 96w Class II Driver533115331353318532865331453287532885328924V 100w Class II Dimmable Driver24V 150w Driver24V 320w Driver24V 480w Driver22

StarStrand Solar Star 24Features• 2700 K Color Temperature• Long runs up to 100 feet• Plastic covered to reduce static failure• Multiple lengths with soldered connectors fortrouble free installation• UL approved for damp locations• Highly flexible material that is backed with3M adhesive tape for easy installation• Field cuttable every 4 inchesApplications• Office task lighting• Under cabinet lighting• Closets• Work areas• Display counters• Steps and railings0.65”CUT LINECUT LINE0.492” 0.11”4”CUT LINECUT LINECuttableevery 4 inchesItem Length Diodes Wattage Lumens Color Temp CRI PC Board Beam Voltage53470534715347253473534744"12"60"120"240"618901803601.233.718.53774802391195239047802700 K2700 K2700 K2700 K2700 K70-7570-7570-7570-7570-75BlackBlackBlackBlackBlack120°120°120°120°120°24V24V24V24V24VCurrent51mA154mA770mA1.5A3.1AModel Number53311 , 53313 , 553185328653314532875328853289Wattage60 Watts96 Watts100 Watts150 Watts320 Watts480 WattsMaximum Run13'22'22'32'50'50'Maximum Run Using2 Output Cords........................70'100'Wiring Diagram1111............2700 K 120ºDistance Foot Candles12in 51.4724in 14.4736in 6.65Wiring Diagram on page 4548in3.85Shown using 1 foot section of Solar Star 2423

StarStrand Solar Star 246-Pin 4-Way Connector53350 1.5"L x 1.5"W x .25"H• Creates a power block for branchingbetween Solar Star 24, 24V Driveror 24V Dimming Controller• Includes two 6-Pin Male End Capsand one 6-Pin Male/Male AdapterPlastic Wire Clip53255 1"L x .5"W x .25"H• Secures to surface connecting cordsand input/output cords of drivers andcontrollers• Backed with 3M adhesive• Package of 1024V Dimming Controller53393 5"L x 2.5"W x 1"H• Full range dimming and on/off• RF remote included• Installs between 24V Driver and Solar Star 24• 4" 6-Pin power input cord, 72" 6-Pin signaloutput cord• Compatible with drivers 53313 and 533186-Pin Rough-In Terminal Block53258 4"L x .75"W x .5"H• Rough in for new installation constructionbetween Solar Star 24,24V Driver or 24V Dimming Controller• Female connector on one end with two wirequick connector on opposite end• Includes one 6-Pin Male/Male Adapterand installation screw6-Pin Connecting Cords53465 5"L x .75"W x .25"H53467 13"L x.75"W x .25"H53468 73"L x .75"W x .25"H• Extend distance between Solar Star 24,24V Driver or 24V Dimming Controller6-Pin Mounting Clip53273 .5"W x .25"H x .5"L• Use on irregular surfaces whenadhesive backing is not sufficient• Recommended interval is every 12"• Package of 206-Pin 90° Connector53464 1.25"L x 1.25"W x .25"H• For 90° corners• Reversible for left or right• Includes 3M adhesive for easy mounting6-Pin Silicone End Cap53469 .75"L x .5"W x .1"H• Placed on run termination• Protects against dust and damage• Package of 10Flexible Aluminum Channel6-Pin Male/Male Adapter53254 36"L x .5"W x .6"H• Creates valance to conceal tape• Irregular surfaces installation• Includes screws for installation53342 .5"L x .5"W x .25"H• Changes female end to male• Package of 6Heat Shrink Wrap6-Pin Male End Cap53256 3"L x 1"W x .25"H• Secure connections when in walls• Waterproof for damp locations• Heat gun required for installation• Package of 1053344 .5"L x .5"W x .25"H• Placed on female end of run termination• Protects against dust nad damage• Package of 66-Pin Male Extender53341 .5"L x .5"W x .25"H• Used to connect 6-Pin 4-Way Connector to 6-PinConnecting Cords and the 6-Pin output cords on24V drivers and 24V Dimming Controller• Package of 6• One included with 53350Adjustable 6-Pin Connector53462 1.18”W x .25”H x 2.3”L• Used for irregular turns on a flat surface• Adjusts from 90° to 180°• Great for radius turn alcovesDrivers(See page 41-42 for detailed driver information)24V 60w Class II Dimmable Driver24V 60w Plug-In Driver24V 60w Class II Driver24V 96w Class II Driver533115331353318532865331453287532885328924V 100w Class II Dimmable Driver24V 150w Driver24V 320w Driver24V 480w Driver24

StarStrand Color Flex Star 24Features• Adjustable color temperaturefrom 2900 K to 5000 K• Plastic covered to reduce static failure• Multiples lengths with soldered connectorsfor trouble free installation• Suitable for damp locations• Highly flexible material that is backed with3M tape for easy installationApplications• Cove and toe kick accent lighting• Outdoor covered porch and patio• Under cabinet lighting• Display case• Restaurants and lounges• Bathroom lightingItem5355053551535525355353554Length4"12"60"120"240"Diodes61890180360Wattage0.962.8814.428.857.6Lumens15-16.545-50225-250450-500900-1000Color Temp2900-5000 K2900-5000 K2900-5000 K2900-5000 K2900-5000 KCRI70-7570-7570-7570-7570-75PC BoardWhiteWhiteWhiteWhiteWhiteBeam120°120°120°120°120°Voltage24V24V24V24V24VCurrent40mA120mA600mA1.2A2.4AModel NumberWattageMaximum RunWiring Diagram533135331860W60W20'20'66Wiring Diagram on page 45Drivers(See page 41 for detailed driver information)533135331824V 60w Plug-In Driver24V 60w Class II Driver25

StarStrand Rainbow Star 24Features• Thousands of colors on one tape• Long runs up to 30 feet• DMX interface with optional controller• Plastic covered to reduce static failure• ETL approved for damp locations• Multiple lengths with soldered connectors fortrouble free installation• Field cuttable every 4 inchesApplications• Cove and toe kick accent lighting• Restaurants, bars and lounges• Store front displays• Back lighting of glass and acrylic panels• Game and theatre rooms• Discos and clubs0.65”CUT LINECUT LINE0.394”0.11”CUT LINE4”CUT LINECuttableevery 4 inchesItem5353053531535335353453535Length4"12"60"120"240"Diodes61890180360Wattage1.444.3221.643.286.4LumensR:18 G:30 B:9R:54 G:90 B:27R:270 G:450 B:135R:540 G:900 B:270R:1080 G:1800 B:540PC BoardWhiteWhiteWhiteWhiteWhiteBeam120°120°120°120°120°Voltage24V24V24V24V24VCurrent60mA180mA900mA1.8A3.6AModel Number Wattage Maximum RunWiring Diagram53313, 53318532865328760 Watts96 Watts150 Watts13'22'30'333Wiring Diagram on page 45Drivers(See page 41-42 for detailed driver information)24V 60w Plug-In Driver24V 60w Class II Driver24V 96w Class II Driver24V 150w Driver5331353318532865328727

StarStrand Aqua Star 24Features• Waterproof IP68 LED tape• Chemical and UV resistant plastic cover• Long runs up to 50’• Installs into aluminum channel orplastic mouting clips• High lumen double chip LED• Multiple lengths with watertightIP68 connectors• Field cuttable every 4 inchesApplications• Swimming pools and fountains• Outdoor decks• Step and stairs• Landscape lighting• Outdoor building accent lighting• Driveway and sidewalk illuminationTop View.416” WideCut LineCut Line.65” Between LEDsCut LineCut LineSide View4” Between Cut Lines.22” HighCuttableevery 4 inchesItemLengthDiodesWattageLumensColor TempCRIPC BoardBeamVoltageCurrent5344153442534435344524"60"120"300"36901804505.413.52767.5256640128032003500 K3500 K3500 K3500 K70-7570-7570-7570-75BlackBlackBlackBlack120°120°120°120°24V24V24V24V225mA563mA1.1A2.8AModel Number533805331653381Wattage60 Watts100 Watts150 WattsMaximum Run21'30'50'Wiring Diagram2223500 K 120ºDistance Foot Candles12in 29.5424in 8.42Wiring Diagram on page 4536in48in3.862.2Shown using 1 foot section of Aqua Star 2429

StarStrand Aqua Star 2424V Outdoor Connecting Cords53364 48"L x .75"W53365 144"L x .75"W• Extend distance between 24VWeatherproof Driver and Aqua Star 24• Extend distance between two sectionsof Aqua Star 24• IP68 rated for underwater applicationup to 10'Silicone End Cap Kit53368.75"L x .5"W x .1"H• Placed on run termination• Protects against water and damageAluminum Channel5337360"L x .75"W x .75"• Can be recessed or surface mount• Aluminum screws includedMounting Clip53370.5"L x .5"W x .25"H• Use to secure Aqua Star 24 to surface• Stainless steel screws included• Clear polycarbonate plastic• Package of 645º Angle Mounting Channel5337448"L x 1"W x .75"• Surface mount to angle tape foraccent lighting• Aluminum screws includedDrivers(See page 42 for detailed driver information)53380 24V 60w Weatherproof Class II Driver53316 24V 100w Weatherproof Class II Dimmable Driver53381 24V 150w Weatherproof Class II Driver30

StarStrand Rainbow Aqua Star 24Features• Waterproof IP68 color changing LED tape• Nine modes of color and movement• Chemical and UV resistant plastic cover• Long runs up to 30 feet• Installs into aluminum channel orplastic mouting clips• Multiple lengths with watertight IP68 connectors• Field cuttable every 4 inchesApplications• Swimming pools and fountains• Outdoor living areas• Landscape lighting• Outdoor architectural features• Signs• Outdoor walkways0.65”CUT LINECUT LINE0.5”4” 4”4”0.25”CUT LINECUT LINECuttableevery 4 inchesItemLengthDiodesWattageLumensPC BoardBeamVoltageCurrent5354153542535435354524"60"120"300"36901804508.6421.643.2108R:108 G:180 B:54R:270 G:450 B:135R:540 G:900 B:270R:1350 G:2250 B:675WhiteWhiteWhiteWhite120°120°120°120°24V24V24V24V360mA900mA1.8A4.5AModel NumberWattageMaximum RunWiring Diagram533805338160 Watts150 Watts13'30'44Wiring Diagram on page 4531

StarStrand Rainbow Aqua Star 2424V Weatherproof RGB Controller533895"L x 2.5"W x 1"H• Required to control up to 30' ofRainbow Aqua Star 24• IP65 rated (not submersible)• RF remote control included• 4" power input cord,72" signal output cord45º Angle Mounting Channel5337448"L x 1"W x .75"H• Surface mount to angle tape foraccent lighting• Aluminum screws included24V Weatherproof Amplifier24V Outdoor Connecting Cords533904"L x 2.5"W x 1"H• Synchronizes additional runs up to30' of Rainbow Aqua Star 24 to one24V Weatherproof RGB Controller• Maximum 27 amplifiers per controller• IP65 rated (not submersible)• Requires an additional 24V Driver• 6" power input cord,6" signal input cord,6" signal output cord53364 48"L x .75"W53365 144"L x .75"W• Extend distance between 24VWeatherproof Driver andRainbow Aqua Star 24• Extend distance between two sectionsof Rainbow Aqua Star 24• IP68 rated for underwater applicationup to 10'Silicone End Cap KitMounting Clip53368.75"L x .5"W x .1"H• Placed on run termination• Protects against water and damage53370.5"L x .5"W x .25"H• Use to secure Rainbow Aqua Star 24to surface• Stainless steel screws included• Clear polycarbonate plastic• Package of 6Aluminum Channel5337360"L x .75"W x .75"H• Can be recessed or surface mount• Aluminum screws includedDrivers(See page 42 for detailed driver information)53380 24V 60w Weatherproof Class II Driver53381 24V 150w Weatherproof Class II Driver32

StarStrandBasic StarFeatures• Low power consumption only1.4 watts per foot• Warm 3500 K color• Highly flexible material that is backed with3M adhesive tape for easy installation• No heat and no UV radiation• Supplied in 16’4” continuous lengths andcan be field cut every 2”, and reconnected asnecessary using specified accessories• Soldered connectors supplied on each end• Additional two power feedsand one splicer supplied.Applications• Cove and toe kick accent lighting• Cabinet lighting• Architectural features• Point of purchase displays• Backlighting of signs and displays• Wine cellars• Closets.38” WideTop ViewCut LineCut Line.65” Between LEDs.09” HighSide ViewCut Line2” Between Cut LinesCut LineCuttableevery 2 inchesItemLengthDiodesWattageLumensColor TempCRIPC BoardBeamVoltageCurrent53201 196"30018.2912583500 K70-75Copper120°12V1.5AModel Number Wattage Maximum RunWiring Diagram5330253275, 53304, 5331030 Watts60 Watts20'33'77Wiring Diagram on page 473500 K 120ºDistance Foot Candles12in 16.5524in 4.6136in 2.0648in1.21Shown using 1 foot section of Basic Star33

StarStrandBasic StarRough In Terminal Block532574"L x .75"W x .5"H• Rough in for new installation constructionbetween 12V Driver and Basic Star• Female connector on one end with four wirequick connector on opposite end• Includes one 4-Pin Male/Male Adapterand installation screwPlastic Wire Clip532551"L x .5"W x .25"H• Secures to surface connecting cordsand input/output cords of drivers,controllers and amplifiers• Backed with 3M adhesive• Package of 10End Power FeedFlexible Aluminum Channel4-Pin Silicone End Cap532603"L x 1"W x .25"H• Required if tape is cut• Two included with Basic Star• Package of 65325436"L x .5"W x .6"H• Creates valance to conceal tape• Irregular surfaces installation• Includes screws for installation4-Pin 4-Way Connector532631.5"L x 1.5"W x .25"H• Allows for L, T and X installationsbetween 12V Driver and Basic Star• Creates a power block for branchingbetween 12V Drivers and Basic Star• Includes two 4-Pin Male End Caps andone 4-Pin Male/Male Adapter45º Angle Mounting Channel5337448"L x 1"W x .75"H• Surface mount to angle tape foraccent lighting• Aluminum screws included53269.75"L x .5"W x .1"H• Placed on run termination• Protects against dust and damage• Package of 10Tape Splicer4-Pin Connecting CordsHeat Shrink WrapAluminum Channel4-Pin Male/Male Adapter532611"L x .5"W x .25"H• Joins two sections if tape is cut• One included with Basic Star• Package of 1053265 3"L x .5"W x .25"H 53266 7"L x .5"W x .25"H53267 13"L x .5"W x .25"H 53268 73"L x .5"W x .25"H• Extend distance between 12V Driverand Basic Star• Connect sections of Basic Star together532563"L x 1"W x .25"H• Secure connections when in walls• Waterproof for damp locations• Heat gun required for installation• Package of 105337360"L x .75"W x .75"H• Can be recessed or surface mount• Aluminum screws included53262.5"L x .5"W x .25"H• Changes female end of BasicStar to male end• Package of 10Flexible Connector532593"L x 1"W x .25"H• Use for corners and angles• Package of 6Drivers(See page 40 for detailed driver information)12V 30w Class II Driver12V 60w Class II Plug-In Driver12V 60w Class II Driver12V 60w Class II Dimmable Driver5330253275533045331034

StarStrand Channel Star 24Features• High lumen output• Available in both Bronze and Aluminum finish• Clear lens for maximum light output• Rigid aluminum channel conceals light sourceand provides excellent heat dissipation• Connect end to end or with the use ofconnecting cords• Available in 3500 K or 5000 K• Includes easy to install mounting clips,both downward and 45º angleApplications• Under cabinets and bars• Office desk task lighting• Retail display cabinets and counters• Window displays• Closet lightingItem53700 AL, BRZ53701 AL, BRZ53702 AL, BRZ53703 AL, BRZ53704 AL, BRZ53710 AL, BRZ53711 AL, BRZ53712 AL, BRZ53713 AL, BRZ53714 AL, BRZLength Diodes Wattage Lumens Color Temp CRI Beam Voltage6"12"24"36"48"6"12"24"36"48"101836547210183654721.853.77.411.114.81.853.77.411.114.81112224446668881222444887329763500 K3500 K3500 K3500 K3500 K5000 K5000 K5000 K5000 K5000 K70 - 7570 - 7570 - 7570 - 7570 - 7570 - 7570 - 7570 - 7570 - 7570 - 75120°120°120°120°120°120°120°120°120°120°24V24V24V24V24V24V24V24V24V24VCurrent77mA154mA308mA463mA617mA77mA154mA308mA463mA617mAModel Number53311, 53313, 53318532865331453287Wattage60 Watts96 Watts100 Watts150 WattsMaximum Run13'22'22'32'Wiring Diagram55553500 K 120ºDistance Foot Candles12in 43.7724in 12.015000 K 120ºDistance Foot Candles12in 63.5924in 17.96Wiring Diagram on page 4536in5.4636in8.2748in3.1648in4.67Shown using 1 foot section of Channel Star 24Shown using 1 foot section of Channel Star 2435

StarStrand Channel Star 246-Pin 4-Way Connector24V Dimming Controller53350 1.5"L x 1.5"W x .25"H• Creates a power block for branchingbetween 24V Driver and24V Dimming Controller• Includes two 6-Pin Male End Capsand one 6-Pin Male/Male Adapter53393 4"L x 2.5"W x .8"H• Full range dimming and on/off• RF remote included• Installs between 24V Driverand Channel Star 24• 4" 6-Pin power input cord, 72" 6-Pin signaloutput cord• Compatible with drivers 53313 and 53318Plastic Wire Clip6-Pin Rough-In Terminal Block53255 1"L x .5"W x .25"H• Secures to surface connecting cordsand input/output cords of drivers,controllers and amplifiers• Backed with 3M adhesive• Package of 1053258 4"L x .75"W x .5"H• Rough in for new installation constructionbetween 24V Driver and24V Dimming Controller• Female connector on one end with two wirequick connector on opposite end• Includes one 6-Pin Male/Male Adapterand installation screw6-Pin Connecting Cords4-Pin to 6-Pin Adapter Cord with On/Off SwitchMounting Clips53465 5"L x .75"W x .25"H53467 13"L x.75"W x .25"H53468 73"L x .75"W x .25"H• Extend distance between 24V Driver, 24VDimming Controller and Channel Star 244-Pin 4-Way Connector53263 1.5"L x 1.5"W x .25"H• Allows for L, T and X installationsbetween 24V Dimming Controller andChannel Star 24 with connecting cords• Includes two 4-Pin Male End Caps andone 4-Pin Male/Male Adapter53353 6"L x 1"W x .5"H• 6-Pin female to 4-Pin male• Used to turn Channel Star 24 on and offwhen not controlled by a 24V DimmingController or by a wall switch53354 1"L x 1"W x .5"H• Additional clips for mountingChannel Star 24 to surface• Package of 44-Pin Connecting CordsHeat Shrink Wrap4-Pin to 6-Pin Adapter Cord45° Angle Mounting Clips53265 3"L x .5"W x .25"H53266 7"L x .5"W x .25"H53267 13"L x .5"W x .25"H53268 73"L x .5"W x .25"H• Connect sections of Channel Star 24 together53256 3"L x 1"W x .25"H• Secure connections when in walls• Waterproof for damp locations• Heat gun required for installation• Package of 1053352 6"L x 1"W x .5"H• 6-Pin female to 4-Pin male• Included in every 24", 36" and 48" sectionof Channel Star 2453355 1"L x 1"W x .75"H• Additional clips for mountingChannel Star 24 to surface at 45 angle• Package of 4Drivers(See page 41-42 for detailed driver information)24V 60w Class II Dimmable Driver24V 60w Plug-In Driver24V 60w Class II Driver53311533135331853286533145328724V 96w Class II Driver24V 100w Class II Dimmable Driver24V 150w Driver36

StarStrand Rainbow Channel Star 24Features• Available in Aluminum finish only• Clear lens for maximum light output• Rigid aluminum channel conceals lightsource and provides excellent heat dissipation• Connect end to end or with the useof connecting cords• Thousands of color combinations available• Includes easy to install mounting clips,both downward and 45º angleApplications• Under cabinets and bars• Alcove lighting• Retail display cabinets and counters• Window displays• Sign illuminationItemLengthDiodesWattageLumensBeamVoltageCurrent53720AL53721AL53722AL6"12"24"1018362.884.328.64R:30 G:50 B:15R:54 G:90 B:27R:108 G:180 B:30120°120°120°24V24V24V120mA180mA360mA53723AL36"5412.96R:162 G:270 B:45120°24V540mA53724AL48"7217.28R:216 G:360 B:60120°24V720mAModel Number Wattage Maximum RunWiring Diagram53313, 53318532865328760 Watts96 Watts150 Watts13'22'30'555Wiring Diagram on page 45Drivers(See page 41-42 for detailed driver information)5331353318532865328724V 60w Plug-In Driver24V 60w Class II Driver24V 96w Class II Driver24V 150w Driver37

StarStrand Rainbow Channel Star 2424V RGB Controller533854"L x 2.5"W x .8"H• Controls up to 30' of Rainbow channelStar 24 using included RF remote control• 4" 6-Pin power input cord,72" 4-Pin signal output cordPlastic Wire Clip532551"L x .5"W x .25"H• Secures to surface connecting cordsand input/output cords of drivers,controllers and amplifiers• Backed with 3M adhesive• Package of 104-Pin Rough-In Terminal Block533834"L x .75"W x .5"H• Rough in for new installation constructionbetween 24V RGB Controller or 24VAmplifier and Rainbow Channel Star 24• Female connector on one end with fourwire quick connector on opposite end• Includes one 4-Pin Male/Male Adapterand installation screw6-Pin Rough-In Terminal Block532584"L x .75"W x .5"H• Rough in for new installation constructionbetween 24V Driver and 24V RGBController or 24V amplifier• Female connector on one end with two wirequick connector on opposite end• Includes one 6-Pin Male/Male Adapterand installation screw6-Pin Connecting Cords53465 5"L x .75"W x .25"H53467 13"L x .75"W x .25"H53468 73"L x .75"W x .25"H• Extend distance between 24V Driver and24V RGB Controller or 24V amplifierHeat Shrink Wrap532563"L x 1"W x .25"H• Secure connections when in walls• Waterproof for damp locations• Heat gun required for installation• Package of 104-Pin 4-Way Connector532631.5"L x 1.5"W x .25"H• Allows for L, T and X installationsbetween 24V RGB Controller or 24Vamplifier and Rainbow Channel Star 24with connecting cords• Includes two 4-Pin Male End Caps andone 4-Pin Male/Male Adapter24V DMX512 Interface/Decoder & Standalone RGB Controller533877.5"L x 4.5"W x 1.5"H• Controls up to 30' of Rainbow channelStar 24 using included RF remote control• Meets DMX512 protocol and can be usedas a DMX decoder• 4" 6-Pin power input cord,72" 4-Pin signal output cord4-Pin Connecting Cords24V Amplifier53265 3"L x .5"W x .25"H 53266 7"L x .5"W x .25"H53267 13"L x .5"W x .25"H 53268 73"L x .5"W x .25"H• Extend distance between 24V RGBcontroller or 24V amplifier andRainbow Channel Star 24• Connect sections of RainbowChannel Star 24 together533864"L x 2.5"W x .8"H• Synchronizes additional runs up to 30' ofRainbow channel Star 24 toone 24V RGB Controller• Requires an additional 24V Driver• 6" 6-Pin power input cord, 6" 4-pin signalinput cord, 6" 4-pin signal output cord• Maximum 27 amplifiers per conrtollerMounting Clips533541"L x 1"W x .5"H• Additional clips for mounting RainbowChannel Star 24 to surface• Package of 445° Angle Mounting Clips533551"L x 1"W x .75"H• Additional clips for mounting RainbowChannel Star 24 to surface at 45 angle• Package of 46-Pin 4-Way Connector533501.5"L x 1.5"W x .25"H• Creates a power block for branchingbetween 24V Driver and 24V RGBController or 24V amplifier• Includes two 6-Pin Male End Capsand one 6-Pin Male/Male AdapterRainbow Dial Controller536009"W x 1.8"H• Controls up to 30’ of Rainbow ChannelStar 24 using included RF remote control• 4" 6-Pin power input cord, 72” 4-Pinsignal output cord38

Maximum Run ChartSeriesDriverWattageDriverModelsMaxRunMax Run Using2-Cord OutputBasic Star30 Watts60 Watts5330253275, 53304, 5331020 Feet33 Feet............Color Flex Star 2460 Watts60 Watts533135331820 Feet20 Feet............Elite Star 2460 Watts96 Watts100 Watts150 Watts320 Watts480 Watts53311, 53313, 53318532865331453287532885328920 Feet33 Feet33 Feet50 Feet75 Feet75 Feet........................105 Feet150 FeetSolar Star 2460 Watts96 Watts100 Watts150 Watts320 Watts480 Watts53311, 53313, 53318532865331453287532885328913 Feet22 Feet22 Feet32 Feet50 Feet50 Feet........................70 Feet100 FeetUltima Star 2460 Watts96 Watts100 Watts150 Watts320 Watts480 Watts53311, 53313, 53318532865331453287532885328913 Feet22 Feet22 Feet32 Feet50 Feet50 Feet........................70 Feet100 FeetRainbow Star 2460 Watts96 Watts150 Watts53313, 53318532865328713 Feet22 Feet30 Feet..................Aqua Star 2460 Watts96 Watts150 Watts53380533165338121 Feet30 Feet50 Feet..................Rainbow Aqua Star 2460 Watts150 Watts533805338113 Feet30 Feet............Channel Star 2460 Watts96 Watts100 Watts150 Watts53311, 53313, 5331853286533145328713 Feet22 Feet22 Feet32 Feet........................RainbowChannel Star 2460 Watts96 Watts150 Watts53313, 53318532865328713 Feet22 Feet30 Feet..................39

StarStrand12V Drivers12V 30w Class II Driver533025.7"L x 1.9"W x 1.2"H• Electronic direct wire driver• 120V-264V input• 12V, 2.5A output• Short circuit protection, overloadprotection, over voltage protection• Constant current• Operating temperature: -4°F to 140°F• IP64 rated• Includes 72'' 4-Pin output cord• Class II UL1310, UL-RU certified12V 60w Class II Driver533047.1"L x 2.4"W x 1.4"H• Electronic direct wire driver• 120V-264V input• 12V, 5A output• Short circuit protection, overloadprotection, over voltage protection• Constant current• Operating temperature: -4°F to 140°F• IP64 rated• Includes 72'' 4-Pin output cord• Class II UL 1310, UL-RU certified12V 60w Class II Plug-In Driver532754.75"L x 2"W x 1.25"H• Electronic plug-in driver• 120V-240V input• 12V, 5A output• Short circuit protection, overloadprotection, over voltage protection• Operating temperature: 32°F to 104°F• Includes 72'' 4-Pin output cord• Class II, UL certifiedStarStrand12V Dimmable Drivers12V 60w Class II Dimmable Driver533106"L x 2.5"W x 2.25"H• Magnetic direct wire driver• 120V input• 12V, 5A output• Short circuit protection, overload protection• Operating temperature: -22°F to 140°F• Includes 72" 4-Pin output cord• Class II UL 2108, ETL Certified• Requires magnetic low voltage dimmer (not included)40

StarStrand24V Driver24V 60w Plug-In Driver53313• Electronic plug-in driver• 120V-240V input• 24V, 2.5A output• Short circuit protection, overloadprotection, over voltage protection• Operating temperature: 32°F to 104°F• Includes 72'' 6-Pin output cord24V 96w Class II Driver532868"L x 3.8"W x 1.5"H• Electronic direct wire driver• 120V-264V input• 24V, 4A output• Short circuit protection, overloadprotection, over temperature, overvoltage protection• Power factor fontrol, constant current• Operating temperature: -22°F to 122°F• Includes 72'' 6-Pin output cord• Class II UL 1310, UL-RU certified24V 60w Class II Driver533187.1"L x 2.4"W x 1.4"H• Electronic direct wire driver• 120V-264V input• 24V, 2.5A output• Short circuit protection, overloadprotection, over voltage protection• Constant current• Operating temperature: -4°F to 140°F• IP64 rated• Includes 72'' 6-Pin output cord• Class II UL 1310, UL-RU certified24V 150w Driver532877.75"L x 3.75"W x 1.5"H• Electronic direct wire driver• 120V/240V input• 24V, 6.5A output• Short circuit protection, overloadprotection, over voltage protection• Operating temperature: 14°F to 140°F• Includes 72'' 6-Pin output cord• UL 1012, UL-RU certified24V 480w Driver5328911"L x 5"W x 1.7"H• Electronic direct wire driver• 120V-264V input• 24V, 20A output• Short circuit protection, overloadprotection, over temperature, overvoltage protection• Power Factor Control, Constant current• Operating temperature: -4°F to 140°F• Includes two 72'' 6-Pin output cordsUL 60950-1, UL-RU certified24V 320w Driver532888.5"L x 4.5"W x 2.25"H• Electronic direct wire driver• 120V/240V input• 24V, 12.5A output• Short circuit protection, overloadprotection, over temperature, overvoltage protection• Operating temperature: 14°F to 140°F• Includes two 72'' 6-Pin output cords• UL 60950-1, UL-RU certified41

StarStrand24V Weatherproof Drivers24V 100w Weatherproof Class II Dimmable Driver533166"L x 2.5"W x 2.25"H• Magnetic direct wire driver• 120V input• 24V, 4A output• Short circuit protection,overload protection• Operating temperature: -22°F to 140°F• Includes 72" weatherproof output cord• Class II UL 2108, ETL Certified• Requires magnetic low voltagedimmer (not included)24V 60w Weatherproof Class II Driver533807.75"L x 2.5"W x 1.5"H• Electronic direct wire driver• 120V-277V input• 24V, 2.5A output• Short circuit protection, overloadprotection, over temperature,over voltage protection• Power factor control, constant current• Operating temperature: -22°F to 158°F• IP67 rated• Includes 72" weatherproof output cord• Class II UL 879, 8750, 1310,UL-RU certified24V 60w Class II Dimmable Driver533116"L x 2.5"W x 2.25"H• Magnetic direct wire driver• 120V input• 24V, 2.5A output• Short circuit protection,overload protection• Operating temperature: -22°F to 140°F• Includes 72" 6-Pin output cord• Class II UL 2108, ETL Certified• Requires magnetic low voltagedimmer (not included)StarStrand24V 150w Weatherproof Class II Driver533818.75"L x 2.75"W x 1.5"H• Electronic direct wire driver• 120V-277V input• 24V, 6.3A output• Short circuit protection, overloadprotection, over temperature,over voltage protection• Power factor control, constant current• Operating temperature: -22°F to 158°F• IP67 rated• Includes 72" weatherproof output cord• Class II UL 1012, 60950-1,UL-RU certified24V Dimmable Drivers24V 100w Weatherproof Class II Dimmable Driver533166"L x 2.5"W x 2.25"H• Magnetic direct wire driver• 120V input• 24V, 4A output• Short circuit protection,overload protection• Operating temperature: -22°F to 140°F• Includes 72" weatherproof output cord• Class II UL 2108, ETL Certified• Requires magnetic low voltagedimmer (not included)24V 100w Class II Dimmable Driver533146"L x 2.5"W x 2.25"H• Magnetic direct wire driver• 120V input• 24V, 4A output• Short circuit protection,overload protection• Operating temperature: -22°F to 140°F• Includes 72" 6-Pin output cord• Class II UL 2108, ETL Certified• Requires magnetic low voltagedimmer (not included)42

StarStrandControllers24V RGB Controller533856"L x 2.5"W x 1"H• Controls color, color intensityand speed• Controls 30' of Rainbow Star 24or Rainbow Channel Star 24• RF remote control included• 4" 6-Pin input cord, 72" 4-Pinoutput cordRemote FunctionalitySix button RF remote controlsinclude on/off, brightness up/down,speed up/down, mode choiceModes - 10Static red, static yellow, staticgreen, static cyan, static blue,static purple, static white, singlecolor rotate, red-green-blue singlecolor jump, colors graduallychange in circles24V Weatherproof RGB Controller533895"L x 2.5"W x 1"H• Controls color, color intensityand speed• Controls 30' of Rainbow Aqua 24• RF remote control included• IP65 rated (not submersible)Remote FunctionalityFour button RF remote controlsinclude on/off, speed up/down,mode choiceModes - 9Static red, static yellow, staticgreen, static cyan, static blue,static purple, static white, singlecolor jump, colors graduallychange24V Dimming Controller53393Remote Functionality5"L x 2.5"W x 1"HSix button RF remote controls• Full range dimminginclude on/off, brightness up/down• Controls up to max run of UltimaStar 24, Solar Star 24, Elite Star24 and Channel Star 24• RF remote control included• All 24V Dimming Controllers areon the same RF frequency• Compatible with drivers 53313, & 5331843

StarStrandControllers24V DMX512 Interface/Decoder & Standalone RGB Controller533877.5"L x 4.5"W x 1.5"H• Meets DMX512 protocol and canbe used as DMX interface/decoder• As a standalone controller, it cancontrol color, color intensity andspeed• Controls 30’ of Rainbow Star 24or Rainbow Channel Star 24• RF remote control included• 4" 6-Pin input cord, 72" 4-Pinoutput cord, and 12” XLR3connecting cord• XLR3 male and female interfaceto connect multiple units togetherRemote FunctionalityFour button RF remote controlsinclude mode choice, mode set,up and downModes - 33Static red, static green, staticblue, static yellow, static purple,static cyan, static white, 7-colorjump, 6-color jump, 7-color flick,red/green jump, red/blue jump,green/blue jump, red/green/bluejump, red/green flick, red/blue flick,green/blue flick, red/green/blueflick, red/green/blue smooth, red/green smooth, red/blue smooth,green/blue smooth,red/green/blue gradual, red/greengradual, red/blue gradual, green/blue gradual, red gradual, greengradual, blue gradual, red dimmode, green dim mode, blue dimmode, red/green/blue mixRainbow Dial Controller536009"W x 1.8"H• 16 color patterns• Dimmable while on static colors• Pause functions while doingskipping or gradual changes• 50 levels for brightnessadjustment• 50 levels for speed adjustment• Remote is powered with arechargeable battery• Charger and holder are included• Additional Rainbow Dial RGBController available 53601Remote FunctionalityMulti-Function remote where thecolor id displayed in the center ofthe dial, allowing the user to nothave to be located in the view ofthe tape.Modes - 16Static red, static green, static blue,static yellow, static purple, staticcyan, static white, colors quicklychange, red fades, green fades,blue fades, yellow fades, purplefades, cyan fades, white fades,colors gradually change24V Color Flex Controller533984"W x 4"L x 2"H• Controls up to 20' of Color FlexStar 24 using RF remote controlor wall controller, both which areincluded• Adjusts color temperature from2900 K to 5500 K• 4" 6-Pin power input cord, 72"4-Pin signal output cordRemote FunctionalityEight button RF remote controlsincluded on/off, color temperatureselction, speed up/down,brightness up/down and pausecapability44

1Direct WireDriverRGBAmplifier24V Diagram1. Elite/Solar/Ultima Star 242. Aqua Star 241Driver41Direct WireDriver2ORPlug Indriver361. Driver4. 53464 90º connector5. 53465 5" Connector cord6. 53469 End Cap541. Direct Wire Driver2. 53362 Output Cord3. Silicone End Cap3. Rainbow Star 24Driver4. Rainbow Aqua Star 241Direct WireDriver23RGBControllerMaximum 30'1. Driver3. 53385 RGB Controller4. 53265 3" Connecting Cord5. 53386 RGB Amplifier6. 53269 End Cap1. Direct Wire Driver2. 53362 Output Cord3. 53389 RGB Controller4. 53390 RGB Amplifier4Maximum 30'5. RGB Channel/Channel Star 246. Color Flex Star 24DriverDriver1. Driver2. E53385 RGB Controller(For RGB Channel 24 Only)3. 36" Channel 244. 12" Channel 245. 53265 3" Connecting cord6. 24" Channel 247. 48" Channel 248. 53267 13" Connecting Cord1. Driver3. 53398 Color Flex Controller4. 53265 3" Connecting Cord5. 53386 Amplifier6. 53269 End Cap45

24V Installation and Design Guidelines• Elite Star 24, Solar Star 24, Ultima Star 24, Aqua Star 24, Rainbow Star 24, Rainbow Aqua Star 24 and Color Flex Star 24 can be field cutevery 4". Once the tape is cut you CANNOT add a power connector or rejoin to start section.• Polarity must be maintained. Each tape has + positive pin. Connectors are marked with + symbol. Positive polarity must be maintained or asection will not light. It is recommended to install all sections and power up to make sure polarity is correct before adhering to surface.• Use the 4-Pin 4-Way Connector or 6-Pin 4-Way Connector to get to 90 degree angles and turns. Connector Cords and the 6-Pin 90 degreeConnector can also be used for corners and around obstacles. IT IS NOT RECOMMENDED TO BEND TAPE MORE THAN 45 DEGREES.• 4-Pin 4-Way Connector or 6-Pin 4-Way Connector can also be used to power branched runs up to the maximum. Positioning of the driver iscritical to limit the amount of drivers required for each installation.• Connector Cords can be used between the driver and the first tape section, driver and controller/amplifier, controller/amplifier and first tapesection, between sections, to go around corners and to extend runs.• Channel can be used to install on irregular surfaces and also areas where tape will be visible and needs to be concealed.• End Caps should be used at every termination whether tape is cut or not.• 24V RGB Controller is necessary for every Rainbow Star 24 and Rainbow Channel Star 24 installation and is installed after the driver andbefore the first section of Rainbow Star 24 tape or Rainbow Channel Star 24. 24V RGB Controller will only work on Rainbow Star 24 orRainbow Channel Star 24.• 24V Weatherproof RGB Controller is necessary for every Rainbow Aqua 24 installation and is installed after the driver and before the firstsection of Rainbow Aqua 24 tape. 24V Weatherproof RGB Controller will only work on StarStrand Rainbow Aqua 24.• 24V Color Flex Controller is necessary for every Color Flex Star 24 installation and is installed after the driver and before the first section ofColor Flex 24 tape. 24V Weatherproof RGB Controller will only work on Color Flex Star 24.• 24V Dimming Controller will work on Elite Star 24, Ultima Star 24 and Channel Star 24. 24V Dimming Controller is installed after the driverand before the first section of tape or channel.• 24V 96w Direct Wire Driver, 24V 60w Dimmable Direct Wire Driver, 24V 100w Dimmable Direct Wire Driver, 24V 100w WeatherproofDimmable Direct Wire Driver, 24V 60w Weatherproof Driver, and 24V 150w Weatherproof Driver are Class II drivers.• 4-Pin Connector Cords, input cords and output cords are made from 22 gauge wire. 6-Pin Connector Cords, input cords and output cords aremade from 20 gauge wire.• Connector Cords are not CL2/CL3 rated. This means that the Connector Cords are not fire rated for in-wall installations.• In order to do an in-wall installation for StarStrand, the customer will need to purchase the 4-Pin Rough In Terminal Block, 6-Pin RoughIn Terminal Block or 4-Pin RGB Rough In Terminal Block and place the blocks on each side of CL2/CL3 rated low voltage wire. A sampleinstallation would be Romex/Line > Driver > Driver Output Cord > Rough In Terminal Block > Wall > CL2/CL3 rated low voltage wire > Wall >Rough in Terminal Block > Tape• If splicing connector cords is required, when splicing the 4-Pin connecting cords, the Red/Blue wire are Negative, the Black/Green wire arePositive. When splicing the 6-Pin connecting cords, the Blue wire is Negative, the Brown wire is Positive.• The maximum amount of cord (driver output cord, connecting cord, controller/amplifier input cord, controller/amplifier output cord) that canbe used in any StarStrand 12V or StarStrand 24V run is 24 total feet before any voltage drop will occur. Connecting cords can also be usedto increase the distance between the driver and tape, driver and controller/amplifier, controller/amplifier and tape, not to exceed 24 total feet.• StarStrand LED tape can operate in an environment between 14°F and 122°F.• The Aqua 24 IP68 connectors are roughly .75" thick.• Use aftermarket industrial grade silicone that meets the requirements of the climate when installing Aqua Star 24 or Rainbow Aqua Star 2446

12V Diagram7. Basic Star1Driver4ORPlug Indriver61. Driver4. 53259 Flexible Connector5. 53261 Tape Splicer6. 53269 End Cap4412V Installation and Design Guidelines• Basic Star can be field cut every 2”.• Polarity must be maintained. Each tape has + positive pin. Connectors are marked with + symbol. Positive polarity must be maintained or asection will not light. It is recommended to install all sections and power up to make sure polarity is correct before adhering to surface.• Use the 4-Pin 4-Way Connector and 2” sections to get to 90 degree angles and turns. Connector Cords can also be used for corners andaround obstacles. IT IS NOT RECOMMENDED TO BEND TAPE MORE THAN 45 DEGREES.• The 4-Pin 4-Way Connector can also be used to power branched runs up to the maximum. Positioning of the 12V driver is critical to limit theamount of drivers required for each installation. Position 12V driver in middle of, or corners of, runs and to power the 4-Pin 4-Way Connector.• Connector Cords can be used between the driver and the first tape section, driver and dimming controller, between sections, to go aroundcorners and to extend runs.• 36” Universal Aluminum Channel can be used to install on irregular surfaces and also areas where tape will be visible and needs to beconcealed.• 4-Pin Male End Cap and 4-Pin Silicone End Cap should be used at every termination whether tape is cut or not.• 12V Dimming Controller will work on Basic. 12V Dimming Controller is installed after the driver and before the first section of tape.• 12V 60w Indoor Plug-In Driver, 12V 60w Direct Wire Driver, 12V 60w Dimmable Direct Wire Driver are Class II Drivers.• 4-Pin Connector Cords, Input Cords and Output Cords are made from 22 gauge wire.• Connector Cords are not CL2/CL3 rated. This means that the connection cords are not fire rated for in-wall installations.• In order to do an in-wall installation for StarStrand, the customer will need to purchase the 4-Pin Rough In Terminal Block” and place theblocks on each side of CL2/CL3 rated low voltage wire. A sample installation would be Romex/Line > Driver > Driver Output Cord > Rough InTerminal Block > Wall > CL2/CL3 rated low voltage wire > Wall > Rough in Terminal Block > Tape• If splicing connector cords is required, when splicing, the Red/Blue wire are Negative, the Black/Green wire are Positive.• The maximum amount of cord (driver output cord, connecting cord, dimming controller input cord, dimming controller output cord) that can beused in any 12V run is 24 total feet before any voltage drop will occur. Connecting cords can also be used to increase the distance betweenthe driver and tape, driver and dimming controller, dimming controller and tape, not to exceed 24 total feet.• LED tape can operate in an environment between 14°F and 122°F.547

StarStrandKits5340012" Channel Star 24 Intro Kit7.5” W x 11.75”L x 2.5” HIncludes:• Two 6" Channel Star 24 3500 K LED Channel• One On/Off Switch• One 60w 24v Plug-In Driver• Installation Hardware534018" Elite Star 24 Intro Kit5.25” W x 10.25”L x 2.5” HIncludes:• Two 4" Elite Star 24 LED Tape• One 60w 24v Plug-In Driver534028" Ultima Star 24 Intro Kit5.25” W x 10.25”L x 2.5” HIncludes:• Two 4" Ultima Star 24 LED Tape• One 60w 24v Plug-In Driver5340384" Elite Star 24 Extension KitIncludes:• One 60" Elite Star 24 LED Tape• Two 12" Elite Star 24 LED Tape5340472" Elite Star 24 Starter KitIncludes:• Six 12" Elite Star 24 LED Tape• Two 5" Connecting Cords• One 60w 24v Pug-In Driver48

StarStrandKits53406216" Elite Star 24 Starter KitIncludes:• Two 60" Elite Star 24 LED Tape• Eight 12" Elite Star 24 LED Tape• Two 5" Connecting Cords• One 60w 24v Pug-In Driver53407360" Elite Star 24 Starter KitIncludes:• One 60" Elite Star 24 LED Tape• One 240" Elite Star 24 LED Tape• Five 12" Elite Star 24 LED Tape• Two 5" Connecting Cords• One 150w 24v Direct Wire Driver53405120" Elite Star 24 Starter KitIncludes:• One 60" Elite Star 24 LED Tape• Five 12" Elite Star 24 LED Tape• Two 5" Connecting Cords• One 60w 24v Pug-In Driver53409360" Rainbow Aqua Star 24 Starter KitIncludes:• One 300" Rainbow Aqua Star 24 LED Tape• One 60" Rainbow Aqua Star 24 LED Tape• One 24v Weatherproof RGB Controller• One 150w 24v Weatherproof Direct Wire Driver• 40 Mounting Clips53408600" Elite Star 24 Starter KitIncludes:• One 60" Elite Star 24 LED Tape• Two 240" Elite Star 24 LED Tape• Five 12" Elite Star 24 LED Tape• Two 5" Connecting Cords• One 150w 24v Direct Wire Driver49

DISPLAYS & SELLING CASESAEMCDFBJGIHNLKA. CounterMax MX-L SeriesDSP022L24”W x 12”H x 12”LB. CounterMax MX-L120DC SeriesDSP022L120DC24”W x 12”H x 12”LC. CounterMax MX-X12 SeriesDSP022X1224”W x 12”H x 12”LD. CounterMax MX-X120 SeriesDSP022X12024”W x 12”H x 12”LF. CounterMax Display RiserDSP024WT24”W x 6”H x 9”LG. CounterMax Storage CabinetDSP025WT24”W x 30”H x 18”LH. CounterMax MX-LD SeriesDSP015SV14”W x 12”H x 6”LI. CounterMax MX-X120c SeriesDSP022X120C24”W x 12”H x 12”LK. CounterMax Selling CaseDSP016ALSV27”W x 7”H x 16.5”LL. CounterMax/StarStrand Selling CaseDSP019AL16.5”W x 4.75”H x 12.5”LM. StarStrand Channel Star 24**DSP014SV14”W x 12”H x 6”LE. CounterMax MX-FD SeriesDSP022FD24”W x 12”H x 12”LJ. StarStrand LED Tape*DSP018SV14”W x 12”H x 6”LN. CounterMax MX-L-LPC SeriesDSP022LLPC24”W x 12”H x 12”L*Includes Basic Star, Ultima Star 24, Elite Star 24, Solar Star 24, Color Flex Star 24, Rainbow Star 24, Aqua Star 24 and Rainbow Aqua Star 24.**Includes Channel Star 24 3000 K, Channel Star 24 5000 K and Rainbow Channel Star 24.50

LMXBRO1203www.maximlighting.comMaxim Lighting International253 North Vineland AvenueCity of Industry, California91746USAGeneral Info: 626.956.4200Customer Service: 800.486.2946General Fax: 626.956.4235Dallas Trade Mart: 214.748.8455Showroom: 3901Email:info@maximlighting.comWeb:www.maximlighting.com3M brand is a trademark and copyright of 3M.CounterMax, Maxim Lighting, StarStrand andStarChip are trademarks of Maxim LightingInternational, Inc. All designs, logos andimages © 2012 Maxim Lighting International,Inc. All Rights Re-served. LMXBRO1203 1203