Exhaust - Custom Chrome

651363651361651364651362651367632283Upsweep Drag Pipes for Evolution Softails byPaughcoWant that classic upswept look for your Evo chopper? Look nofurther! You have three styles to choose from. Brackets included. Fit86-99 Softails.651364 Upsweep goose drags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$305.99651366 Upsweep slash drags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$305.99651367 Upsweep straight drags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$319.99651363 Unsweep headers only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$224.99632284651400Drag Pipes for Dynas by Paughco40” long drag pipes for Evolution and Twin Cam Dynas. Made in theUSA.651400 91-06 Dyna drag pipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99651401 07-11 Dyna drag pipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$207.99Paughco Upswept Headers for Shovelheads1 3/4"-diameter upsweep header set for Shovel-heads in swingarmframes. Will work with FXE battery boxes, and mounting brackets areincluded. Use with our exhaust extensions or mufflers which are soldseparately.632285 Upswept header set for Shovelhead models from 70-84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99Paughco Pipes for Shovelheads1 3/4"-diameter, 3-piece ‘S’ style side-by-side headers, upsweptheaders, upswept slash pipes and a gooseneck pipe set for allShovelheads in rigid frames with kickstart only from 66-84. Theexhaust extensions for the header sets are sold separately. Some pipesmay require the fabrication or purchase of separate brackets.632283 3-piece side by side headers. . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99651362 3-piece upswept headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$290.99651361 3-piece upswept headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$290.99632284 3-piece gooseneck pipe set (hardware included) . . . . . . . .$303.99651396 2-piece gooseneck pipe set 70-84. . . . . . . . . . . . . . . . . . . . . .$245.99651368 3-piece slash cut pipe set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$290.99651424 Hanger bracket for 651396 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.996*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

651406651390651391651407651392651408651352Shotgun and Staggered Dual Drag Pipes forShovels by PaughcoStaggered drag pipes are 1 3/4” diameter and 34” or 40” long witha rear pipe “over transmission” version available. Shotgun drags are40” long. Fit Shovels with swingarm frames (non FLH).651389 34” Staggered drag pipes 66-69 . . . . . . . . . . . . . . . . . . . . . . .$159.99651390 40” Staggered drag pipes 66-69 . . . . . . . . . . . . . . . . . . . . . . .$159.99651391 40” 2-piece Over tranny drag pipes 66-69 . . . . . . . . . . . . . .$146.99651352 40” 3-piece Over tranny drag pipes 66-69 . . . . . . . . . . . . . .$159.99651392 40” Shotgun drag pipes 66-69. . . . . . . . . . . . . . . . . . . . . . . . .$159.99651393 40” Shotgun drag pipes RIGID 66-69 . . . . . . . . . . . . . . . . . . .$159.99651398 40” Shotgun drag pipes RIGID 70-84 . . . . . . . . . . . . . . . . . . .$159.99Note: Requires custom bracket for installation651399Exhaust Systems for Shovels by PaughcoChoose from four different styles of 2 into 2 exhaust systems foryour Shovel.651406 34” Drags for 70-84 FLH . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99651407 34” Goose drags for 70-84 FLH . . . . . . . . . . . . . . . . . . . . . $159.99651408 38” Slash muffler system for 70-84 FLH. . . . . . . . . . . . . . $277.99651388 38” Tapered muffler system for 66-69 FX . . . . . . . . . . . . $312.99651399 38” Tapered muffler system for 70-84 FX . . . . . . . . . . . . $351.99www.customchrome.com 7

Needs custombracket forinstallation651394651365Slashed Shotgun Drag Pipes for Shovelheads70-84 by PaughcoThis bitchin’ set of 1 3/4” Shotgun style drag pipes are 40” long,feature slash cut ends and T-bolt slider channels for hidden mounting.For use on 70-84 frames with electric start & wrap-around oil tank.Made in USA by the gang at Paughco.632901 Slashed Shotgun Drag Pipes for Shovelheads 70-84 . . . . .$159.99Needs custombracket forinstallation651381651371Drag Pipes for Generator Shovels 66-69 byPaughcoHere’s a great lookin’ set of 1 3/4” drag pipes with rear pipe in frontof tranny for use in swingarm frames. Will also work with rigidframes if the mechanical brake crossover tube has been removed.Look great on frames with extended front ends! Pipes are 40” long,and feature T-bolt slider channels for hidden mounting. Made in USAby the gang at Paughco.632903 Drag Pipes for Generator Shovels 66-69 . . . . . . . . . . . . . . . .$159.99632277632279Upsweep Fishtail Pipes by PaughcoThese pipes never go out of style! Classic upswept fishtails go withany chopper. Include brackets and hardware where applicable.651365 Fits 86-99 Softail models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$382.99651395 Fits 00-06 Softail models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$549.99651394 Fits 00-06 Softail models, head pipes only . . . . . . . . . . . . . .$305.99651381 Fits 57-85 XL models with rigid frames . . . . . . . . . . . . . . . . .$329.99651371 Fits 86-03 XL models with rigid frames . . . . . . . . . . . . . . . . .$379.99Staggered Duals for Shovelheads by Paughco40” long 1 3/4" staggered dual exhaust drag pipe system for 66-69swingarm Shovelhead applications. Work with kick or electric start,and tucks up nicely under floorboards so they won’t drag on righthand turns. Also ideal for use with Shovelhead top/Panhead bottomengines in swingarm frames. Slider channels on back of pipes for aclean look. Use hanger bracket #632277. Made in USA by Paughco.632279 1 3/4" Staggered duals for shovels in swingarm frames . .$159.99632277 Hanger bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.998*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

Needs custombracket forinstallation632276Staggered Duals for 58-64 Panheads40” long 1 3/4" staggered dual exhaust drag pipe system for 58-64swingarm Panhead applications. Work with kick or electric start, andtucks up nicely under floorboards so they won’t drag on right handturns. Slider channels on back of pipes for a clean look. Use hangerbracket #632277. Made in USA by Paughco.632276 1 3/4" Staggered duals for swingarm 58-64 Pans. . . . . . . .$159.99632277 Hanger bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.99Drag Pipes For Panheads 48-65 by PaughcoThese are a pair 1 3/4” staggered dual Drag Pipes that fit Panheads48-65 with rigid frames & mechanical brakes, as well as swing armframes. The pipes are 40” long and feature T-bolt slider channelsfor hidden mounting. Made in USA by Ron & the gang at Paughco.632900 40” Drag Pipes for Panheads 48-65 . . . . . . . . . . . . . . . . . $159.99632278Side By Side Header Pipes for Panheads1 3/4" side-by-side 3-piece “S” style header pipe set for 48-64 Panheadengines in rigid frames with kick start only. Exhaust extensions soldseparately. Made in USA by Paughco.632278 Side by side header pipes for kickstart Panheads in rigid frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99651358651360Drag Pipes for 4-Speed FL Models with Kick orElectric StartDesigned to clear factory fiberglass saddlebags or rear highway bars,these 1 3/4" drag pipes are available in straight cut version to fit4-speed FL’s with kick or electric start. They will not fit electric startonly models without modification. The rear pipe is an under-thetransmissionstyle for a tucked in look. Each set includes a chromemounting bracket. Made in USA by the Paughco crew.11263 1 3/4” Straight-Cut Drag pipes . . . . . . . . . . . . . . . . . . . . . . . .$179.99Upsweep Drag Pipes for Panheads by PaughcoThese pipes fit on any Panhead motor in a rigid frame.Available in three styles.651358 Upswept Goose drags 48-57 . . . . . . . . . . . . . . . . . . . . . . . $290.99651359 Upswept slash pipes 48-57 . . . . . . . . . . . . . . . . . . . . . . . . . $290.99651360 Upswept straight pipes 48-57 . . . . . . . . . . . . . . . . . . . . . . $290.99www.customchrome.com 9

651354Clamp-on Fishtail Tip by PaughcoUniversal fishtail tip slips over any 1 3/4” diameter headpipe.651334 Fishtail tip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.996514046513846322696322706514286322712 into 1 Headpipes by PaughcoThese head pipes are 1 3/4” diameter and will accept most universalmufflers in this section. They are 2 to 3 piece sets depending onapplication.651350 58-65 Big Twin 2in1 hydraulic brake . . . . . . . . . . . . . . . . . . .$159.99651351 58-65 Big Twin 2in1 mechanical brake . . . . . . . . . . . . . . . . .$159.99651354 66-69 Big Twin rigid frame 2in1 . . . . . . . . . . . . . . . . . . . . . . .$159.99651402 70-84 FL models 2in1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$256.99651404 80-83 5-Speed FLT models 2in1 . . . . . . . . . . . . . . . . . . . . . . . .$245.99651383 86-03 Sportster 2in1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$245.99651384 57-85 Sportster 2in1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$245.99Optional Accessories651428 Heatshield for 651351 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.99Custom 31in. Exhaust Extensions by PaughcoChrome plated exhaust extensions for 1 3/4” dia. pipes, available infishtail, slash cut or gooseneck versions. Made in USA by Paughco.Sold each.632269 31" Fishtail (bent up) extension for 1 3/4" dia. pipes . . . .$109.99632270 31" Slash cut extension for 1 3/4" dia. pipes . . . . . . . . . . . . .$99.99632271 31" Gooseneck extension for 1 3/4" dia. pipes . . . . . . . . . . .$99.99Straight 18” Fishtail by PaughcoUniversal straight un-baffled fishtail pipe slips over any 1 3/4” diameterheadpipe. Eighteen inch overall length. Sold each.651333 Fishtail pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99“Trim Tail” Style Muffler by PaughcoHere’s Paughco’s version of the old style “Trimtail” mufflers that aregreat for restoration, or on that retro ride you’re putting together!The muffler is 28” long, 2 1/2” in Diameter and attaches to 1 3/4”exhausts. A top quality muffler with a nice deep sound, and brilliantlychrome plated! Sold each. Exhaust bracket/clamp sold separately.Made in USA by the gang at Paughco.632904 “Trim Tail” Style Muffler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$131.99Classic Fishtail MufflerShow-chrome muffler with an antique-style tip. This clean, bracketlessmuffler allows left or right side mounting and has a 1 3/4"-inlet, andis 35"-long.11419 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.9910*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

651338651335651339651340651348“Fishtail” Style Muffler by PaughcoThe muffler is 22 1/2” long, 1 7/8” in Diameter and attaches to 1 3/4”exhausts. A top quality muffler with a nice deep sound, and brilliantlychrome plated! Sold each. Exhaust bracket/clamp sold separately. Asecond version with a slider for Installation on the right side is alsoavailable and a 2 1/2" diameter, 30" long version for 80-84 FLT models,a 3" diameter, 29" version for 85-94 Touring models and a 3"diameter, 31" version for 95-13 Touring models. Sold each. Made inUSA by the gang at Paughco.651335 Fishtail style muffler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$131.99651336 Slider fishtail muffler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$131.99651340 80-84 FLT muffler (left) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$147.99651341 80-84 FLT muffler (right) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$147.99651347 85-94 Touring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$194.99651348 95-13 Touring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$219.99Universal Tapered Mufflers by PaughcoAvailable in two versions. A 3 inch diameter, 30 inch long muffler ora 2 1/2 incher with 22 inches of length. Both fit over 1 3/4 inch headpipes. Sold each.651338 Muffler 22 inches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $85.99651339 Muffler 30 inches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $154.99FL-Style Fishtail MufflersShow-chrome replicas of the mufflers found on 58-66 FL models.These clean, bracketless mufflers permit left or right-side mountingand have a 1 3/4"-inlet. Available in two lengths. Sold each.11420 28"-long muffler (repl. OEM 65244-62TA) . . . . . . . . . . . . $65.9911421 33"-long muffler (repl. OEM 65258-88T) . . . . . . . . . . . . . $72.9911214 3 1/4" stainless steel muffler clamp (repl. OEM 65293-58) $11.99Universal Turnout or Turndown Muffler byPaughcoTurnout muffler that connects to any 1 3/4” headpipe. 3” diameter,all steel internal baffles, can be rotated and used as a turndown muffler.Sold each.651344 Turndown muffler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99Vintage Slip-On MufflerThis chrome reproduction of the 58-65 Panhead ‘Shorty’ mufflerworks with single or dual (crossover) 1 3/4" diameter header pipesand most stock brackets. Measures 3 1/4"-diameter x 25 1/2" long.280925 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99Muffler Hanger for Touring ModelsThis is a quality reproduction of the original muffler hanger usedon Touring models since 1985. Sold each. Replaces OEM 65724-85.688643 Muffler hanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.99www.customchrome.com 11

650358650359650357Slash Cut Slip-ons by PaughcoKit with 3” diameter mufflers complete with bracket and hardware.Fits 00-07 Softails (except FXSTD, FLSTF, FLSTN and FLSTS).651337 Slash cut slip-ons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$343.99280904Brass Exhaust End Caps by PaughcoCNC-Machined from Brass. Available in 1 3/4" & 2" to fit most aftermarketexhaust systems. Easy to install, slides into place and is held inplace using the 1/4" hardware that is provided (drilling a hole in theexhaust pipe may be required). Sold in pairs and made in the U.S.A.For 1 3/4" Pipes650357 Short Curve exhaust end caps, 1 3/4" . . . . . . . . . . . . . . . . . .$86.99650358 Long Curve exhaust end caps, 1 3/4". . . . . . . . . . . . . . . . . . .$86.99650359 Tapered exhaust end caps, 1 3/4". . . . . . . . . . . . . . . . . . . . . .$86.99For 2" Pipes650360 Short Curve exhaust end caps, 2". . . . . . . . . . . . . . . . . . . . . .$86.99650361 Long Curve exhaust end caps, 2" . . . . . . . . . . . . . . . . . . . . . .$86.99650362 Tapered exhaust end caps, 2" . . . . . . . . . . . . . . . . . . . . . . . . .$86.99280905Trumpet MufflersVery popular years ago, these trumpet mufflers are making a bigcomeback on the retro-style motorcycles, and are a perfect finishingtouch to an early style Bobber or Chopper. 1-3/4" inlet, removablebaffles, and universal mounting bracket included. Available instraight, or up-swept styles. Sold each.280904 19" straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$114.99280905 20" upswept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$123.99Universal Shorty MufflerA versatile, universal 11 3/4"-long muffler with one 1 3/4" and one 11/2" opening. By simply reversing the muffler, it can work on either1 3/4" or 1 1/2" exhaust systems. The shorty muffler comes completewith a welded-on stud, hardware and flat strap for mounting.11183 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99Exhaust Flange Kit for S.T.D. Shovelhead/Panheadby Vulcan Engineering• These are perfect for building a one-off custom exhaust system forour ‘Pandemonium’ or Shovelhead motors• Designed to fit all S.T.D. 3-bolt Shovelhead and Panhead’s• Made in the U.S.A.• Sold as a pair668255 S.T.D. 3-bolt Shovelhead/Panhead exhaust flange kit . . . . .$13.9912*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

4 Aces Trumpet tip641620641621641622641623Mohawk tipExhaust FlangesWant to build a custom exhaust for your Evo, Shovelhead, Panheador Ironhead? Theses exhaust flange set are exactly what you need;Team these up with the Biltwell exhaust builders kit CCI #632735and you have everything you need for the perfect start on thosecustom exhaust pipes that are bouncing around in your mind. Mildsteel 16-gauge tubing is 1.75” diameter with appropriate flange oneach end.641620 Evo Flange Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99641621 Shovelhead Flange set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99641622 Panhead Flange set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99641623 Ironhead Flange set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99Ribbed tipHollow Point tipUniversal Exhaust Builders KitA selection of pre-fabbed 1 3/4” tubing, header flanges and exhausttips that puts the art of custom exhaust building in your hands! EachKit includes: Two 16-inch-long (350mm) straight sections, Two 3.5-inchradius (90mm) U-bends with Panhead flanges (flanges not shown inpicture), Two 5-inch radius 134mm) U-bends with STD 3-hole flanges(flanges not shown in picture), Two Evolution cylinder flanges, TwoShovelhead cylinder flanges, Two Ironhead cylinder flanges and Twopinched tips. Everything needed to build a set of pipes for one bike,with enough scraps left over to start on another! Simply cut/weld asrequired, using the flanges that fit your engine. Finish them off withthe exhaust wrap also featured in the Exhaust section for a bad-asslook! Kit does not include mounting brackets, clamps, snap rings andexhaust flange collars for Evo’s, which are offered separately. Rawsteel. From our buddies Magoo & Chris at Biltwell, Inc.632735 Universal Exhaust Builders Kit . . . . . . . . . . . . . . . . . . . . . . . . .$164.99Exhaust tips by BiltwellTriumph guru and faithful Biltwell supporter Wes White had agreat idea: make some stylish exhaust tips to dress up the lookof standard 1-3/4” straight pipes. We agreed with Wes, andasked him to design a set. The velocity stack on an old Amal carbinspired Wes’s classic design. We were so inspired by Wes’s idea,we designed three tips of our own. All four Biltwell exhaust tipsets are machined from 6061 T-6 aluminum and press fit inside any1-3/4-inch O.D. straight pipe perfectly. We recommend drilling andscrewing the tip to the pipe to complete installation, but we leavethis step to the discretion of the builder. After CNC machining,each tip set is sandblasted to a dull neutral finish, then black orsilver anodized for protection and appearance. After anodizing,we laser etch the Biltwell brand and model ID into each tip. Thislaser etching is hidden inside the exhaust pipe when the tips areinstalled. Sold in pairs.Black anodized tips684727 4 Aces Trumpet tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99684728 Mohawk tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99684730 Hollow Point tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99Silver anodized tips684731 4 Aces Trumpet tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99684732 Mohawk tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99684733 Ribbed tip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99684734 Hollow Point tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99www.customchrome.com 13

Oxygen SensorSocket ToolThis tool is used to remove orinstall the oxygen sensor onall closed loop fuel injectedH.D. models. Socket has a 3/8"drive receiver or can be usedwith a 7/8" wrench. Socket willwithstand up to 125 ft/lbs oftorque.640091 For use on all EFImodels 06-11 (except10- touring) . . $47.991123012" Drag Pipe BafflesThese replacement drag pipe baffles areextra-long. Sold each.11230 Fits 1 1/2"-diameter pipes. . . . . .$6.99Heat Shields by PaughcoClassic styled universal heat shieldsavailable in 5 1/2" or 9” lengths. Soldeach.632272 9" long heat shield with clamp. . . . . . . . . . . . . . . . . . . . . . . . . .$54.99632273 5 1/2" long heat shield with clamp. . . . . . . . . . . . . . . . . . . . . . . . . .$48.9911238Kibblewhite Exhaust Spigot forPanhead ModelsRepair mangled exhaust spigots. Machinedfrom 6061-T6 extruded tube. Weldingrequired.55165 Fits all Panhead motors. . . . . . .$11.4911228112294" Mini Pipe BafflesShort length, full-performance, all-steelbaffles for all pipes between 1 1/2" and 2" indiameter. Sold each.11238 Baffles fits 2"-diameter pipes . .$3.9911229 Baffles fits 1 3/4"-diameter pipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.9911228 Baffles fits 1 1/2"-diameter pipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99Chrome Flexible ExhaustCoversOriginally used on the early Panheads andKnuckleheads, these 12"-long exhaustcovers give your bike a ‘vintage’ look. Fitsmost 1 3/4" two-piece pipes.15981 Sold each . . . . . . . . . . . . . . . . .$27.99Muffler Reducer SleeveZinc-plated muffler reducer sleeve to adaptall 1 3/4" mufflers to 1 1/2" drag pipes.84805 Sold each . . . . . . . . . . . . . . . . . . . .$2.99Vulcan Engineering ExhaustPower ConesMachined from 12L15 Billet Steel Bar668162 Exhaust Cones . . . . . . . . . . . . . . .$21.99280018Steel Pipe Baffles8"-long universal steel pipe baffles withmounting bolt. Sold each.280018 Fits 1 3/4"-diameter pipes. . . . . .$4.99280019 Fits 2"-diameter pipes . . . . . . . . .$4.99280033Exhaust Pipe Heat Shields forFL ModelsFits stock exhaust pipes on 4-speed FLmodels from 70-84 with single or dualexhaust. Includes shield and clamps.280033 Front pipe heat shield (repl. OEM65561-70) . . . . . . . . . . . . . . . . .$27.9914*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

784001598068808378401Chrome Flame Universal Heat ShieldsTurn a normal exhaust system into something unusual with chromeplatedsteel heat shields cut into the shape of flames. Includes clamps.Sold each.78400 For 2" pipes, 11 3/4"-long. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.9978401 For 1 3/4" pipes, 8"-long. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99Chrome Exhaust Heat Shield7" chrome-plated heat shield for all 1 3/4" diameter exhaust pipes.A unique integrated clamp mounts this shield for a neat customappearance.15980 Chrome heat shield (repl. OEM 65270-84T) . . . . . . . . . . . . . .$15.49688083 Chrome drilled heat shield (repl. OEM 65270-84T) . . . . . . .$15.99688078 Black 7” heat shield (repl. OEM 65270-84T). . . . . . . . . . . . . .$17.99Exhaust Crossover GasketsThese knitted steel gaskets are used in the crossover tube betweenthe front and rear exhaust pipes. They fit sportster and FXR modelsfrom 82-99 as well as Fat Boy and FLSTN models from 90-99.54229 Replaces OEM 65781-82 (pack of 10). . . . . . . . . . . . . . . . . . . .$34.991210612095Motor Factory Exhaust Port GasketsThese knitted wire-mesh crush gaskets are available in either theearly-style or the later-style which has been used since 1991. Theymay be installed in all Evolution or Twin Cam 88 motors when fittingOriginal Equipment or aftermarket exhaust systems. Packs of 10.12106 Early (repl. OEM 65324-83). . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.9912095 Late (repl. OEM 65324-83A). . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99Motor Factory ‘Tuff Seal’ Exhaust Port GasketsThe finest exhaust port gasket available. Born on the track, theyinherited their racing lineage from head gaskets used in high-horsepowerapplications. The ‘Tuff Seal’ is a metal-core, silicone-impregnatedmaterial that has a tough alloy ring around the inside edge tokeep exhaust gases from escaping and to ensure a faultless pipe-toheadseal. Fit Shovelheads from 66-84.12100 Pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.99High-Performance Exhaust GasketsThese high-tech gaskets feature a stainless steel-clad, heat-resistantmaterial. They also have a tough, alloy ring around the inside edgeto keep exhaust gasses from escaping and to insure a faultless sealbetween the pipe and the exhaust port of all Shovelhead enginesfrom 66-84.12099 Pack of 10 (repl. OEM 65835-86T). . . . . . . . . . . . . . . . . . . . . . . .$9.99www.customchrome.com 15

Muffler Joint GasketsThese copper gaskets are used to seal the joints between the mufflersand the headpipes on all FLT, FLHT, FLHS and Road King models fromlate 85-94.54230 Replaces OEM 65721-85 (pack of 10). . . . . . . . . . . . . . . . . . . .$12.99Exhaust Stud-Nut and Gasket Kit for ShovelheadsIncluded in this kit are two ‘Tuff Seal’ exhaust port gaskets. Thesenew-style gaskets make all others obsolete. The kit also preventsthread stripping in the heads by using two permanent studs. Includesfour studs, two ‘Tuff Seals’ and two chromed nugget nuts with lockwashers.Fits Shovelheads from 66-84.25067 Sold on a card of 5 sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.99Extra Wide Aircraft Style Exhaust Clamps1 1/16" wide from heavy wall 1/8" thick steel to offer an improvedseal and better support for the exhaust system.380103 Fits Panhead models 48-65. 2 1/8“.. . . . . . . . . . . . . . . . . . . . . .$22.99Wide Aircraft-Style Chrome Exhaust ClampsThese custom clamps measure 11/16"-wide and are wider thanstandard clamps. They were made to provide a better seal andsupport the exhaust pipes to their flanges. Made from heavy-wall(1/8"-thick) cold-rolled and chrome-plated steel, they have a 17/8"-inside diameter which also makes them ideal for attachingmufflers to headpipes. Sold in pairs.11234 Fit Sportster models from 57-85 . . . . . . . . . . . . . . . . . . . . . . . .$27.99Chrome Heavy Duty ‘P’ ClampsThese heavy duty steel ‘P’ clamps are 1/8" thick and 7/8" wide.Includes pinch bolt with nut and lock washer. Sold each.380151 Fits 1 3/4"-diameter pipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.49Chrome Aircraft-Style Exhaust ClampsCustom exhaust clamps made of heavy-wall (1/8"-thick), cold-rolledsteel, complete with sockethead screws. Sold in pairs.11101 Fit Sportster models from 57-85 (repl. OEM 65273-88T). . . . $16.9911233 Fit Panheads from 48-65 (repl. OEM 65274-88T). . . . . . . . . . $16.99Muffler ClampA highly-polished muffler clamp made of .100" thick stainless steelstrap. It’s 1"-wide and has a 3 1/4" opening an exact duplicate ofthe OEM clamp used to support the mufflers on FL models for manyyears. Sold each.11214 3 1/4" stainless steel muffler clamp (repl. OEM 65293-58) . . .$11.99Chrome Late Model Muffler ClampsThis two-piece clamp fits all FXRD, FLT, FLHT and FLHS 5-speedmodels from 85-93. The earlier version was a one-piece clamp whichoften broke during removal or installation. Each clamp includes allnecessary chrome mounting hardware. Sold in pairs.11427 Replaces OEMs 65722-85, 65722-85B. . . . . . . . . . . . . . . . . . . .$22.4916*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

Shovelhead Exhaust Flange BoltsSockethead bolts for the exhaust flanges on Shovelheads from 66-84.25064 Replaces OEM 3201W (card of 24) . . . . . . . . . . . . . . . . . . . . . .$13.99667505667506Exhaust Studs and Nuts by James GasketsQuality replacement exhaust studs and nuts. Exhaust studs are sold inpairs, exhaust nuts are sold in packs of eight.667505 Exhaust studs (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99667506 Exhaust flange nuts (8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.99General WarningsMotorcycle riding is a dangerous activity. The only way to be sure to avoidinjury is not to ride! Even if you use the finest and best-maintained equipment,wear a helmet and protective clothing, and take all possible precautions, itis not possible to avoid every risk. Motorcycle accidents frequently result inserious injury, including death. Please do not operate a motorcycle or othermotor vehicle when you are tired or under the influence of alcohol or drugs,or when your perception is impaired for any other reason. At all times, pleasewear a helmet, ride carefully and within posted speed limits, and obey all othertraffic regulations and instructions from law enforcement personnel.Custom Chrome, sells aftermarket motorcycle parts for Harley-Davidson ® andother brands. If you do not have the necessary experience and skill, please havea qualified mechanic install any new or replacement part on your motorcycle.The failure to install properly and test any new or replacement componentcould adversely affect your motorcycle’s operation and result in an accident,including a fatal accident.Federal and state laws and regulations impose restrictions on modifying theengine, ignition, exhaust and other components of a motorcycle intendedfor on-road use. In addition, these laws and regulations impose requirementson windshields, brake components, lighting, and other equipment on yourmotorcycle. Accordingly, certain parts in this catalog are for competition ordisplay purposes only. In general, those parts are indicated by a “Competition”mark: a checkered flag in a yellow oval.If you are a retail customer, you are responsible to know the laws andregulations that govern the modification of your motorcycle. Custom Chrome isnot responsible if you modify your motorcycle or any component in violation oflaw. If you have any questions regarding a particular component, please consultyour dealer or a qualified motorcycle mechanic.The following is additional information relating to components for sale invarious sections of this catalog. This information is not exclusive – if you haveany questions regarding the installation or use of any component, pleasecontact your dealer, a qualified mechanic, or Custom Chrome’s customerservice department.© COPYRIGHT 1982-2013 BY CUSTOM CHROME - A DIVISION OF DAE-IL USA, INC.ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY BE REPRODUCED,STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BYANY MEANS; ELECTRONIC, MECHANICAL, PHOTOCOPYING, RECORDING, OROTHERWISE WITHOUT PRIOR WRITTEN PERMISSION OF THE PUBLISHER.Any “add-on” or “modified” emissions-related parts contained in this brochure that are subject to anti-tampering laws may or may not have been evaluated and/orexempted by CARB. As a distributor, Custom Chrome makes no representation or warranty with respect to whether the emissions-related parts in this brochure arelegal for sale, installation or use in any state unless the part is installed in a vehicle used only for closed-course competition. Consult with the manufacturer as to anysuch exemptions before purchasing any add-on or modified emissions-related parts for non-competition use in California or elsewhere.www.customchrome.com 17

World’s Finest Products For Harley-DavidsonsServiceMaintenanceCustomizationRepairPerformance18225 Serene Drive | Suite 150 | Morgan Hill, CA 95037 | Printed in USA18*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.