X-Force luminaires - Thorn Lighting
X-Force luminaires - Thorn Lighting
X-Force luminaires - Thorn Lighting
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Corrosion<strong>Force</strong>A high performance, corrosionresistant IP65 proof range. Madefrom materials selected to withstandaggressive atmospheres laden withsalts, acids and mineral oils.Corrosion<strong>Force</strong> is constructed from materials that make it suitablefor locations that are exposed to liquids or atmospheres that containpotentially corrosive chemicals. Typical areas include foodprocessing areas or milk dairies but also in areas where specialisedcleaning agents are used.When selecting Corrosion<strong>Force</strong> for an application care needs to betaken that it is suitable. Please check page 15 of this brochure forguidance or contact your local <strong>Thorn</strong> office of there is any doubt aboutthe suitability of a luminaire.Lamps18-70W T26 (FD) linearfluorescent. Cap: G1328-80W T16 (FDH) linearfluorescent, Cap: G5Materials/FinishCanopy: glass-fibrereinforced polyester.Diffuser: PMMA with linearprisms. Gasket: expandedpolyurethane.Toggles: stainless steel.Gear tray: steel, whiteenamelled finishInstallation/MountingCable entry positions at theback and each end of the fitting.Supplied with IP65 grommet,Stainless steel quick fix bracketssupplied with each luminaire,Stainless steel toggles arecaptive in the canopy to preventloss during maintenance, andsteel gear tray is retained byfinger operated spring latches.Accessory kits for BESA boxmounting, conduit mounting,chain suspension and catenarysuspension are all available.Through wire kits can be specifiedfor use with non-emergencyversions (see accessories listing).StandardsDesigned and manufactured tocomply with EN 60598Emergency EN60598 2.22.Class I ElectricalIK02 (diffuser)IK03 (canopy)650°C fire retardant(glow wire test)IP65SpecificationTo specify state:High performance, IP65, dustand moisture proof corrosionresistant luminaire with GRPcanopy, PMMA diffuser andstainless steel toggles, 18-70WT26 linear fluorescent lamps or28-80W T16 linear fluorescentlamps, digital dimming andemergency options, with HFgear or magnetic gear.As <strong>Thorn</strong> Corrosion<strong>Force</strong>.Key Features• GRP canopy• Corrosion resistant PMMAdiffuser• Choice of T26 or T16 lamps• Switchstart or High Frequencycontrol gear• Integral 3 hour maintainedemergency versions• Digital Dim options• Good chemical resistance• Horizontal or verticalapplications• Stainless steel toggles• Through wire options• Quick-fix brackets supplied• LSOH cable as standardCorrosion<strong>Force</strong> Diffuser PMMA Canopy GRPUV Resistance Good GoodImpact Resistance 0.2Nm 0.35NmResistance to ageing Excellent ExcellentSilicone free Yes YesHalogen free:LuminaireInternal WiringFood gradecertification(15° angle)YesYesYesApplications• Abattoirs• Agricultural buildings• Factories• Garages• Kitchens• Plant rooms• Process areas• Transport terminals• Wine Cellars• Paper processing• Textile processing plants• Cheese dairiesYesn/aYesGlow wire test 650°C 850°CHeat resistance of95°C 160°Cluminaire plasticsUV Transmittance 91% n/a20
Change language