Simatic HMI operator stations

SIMATIC HMI operator stations –SIMATIC Multi Panels, Panel PCs and Flat Panelsin optimum housingBrochure · October 2007SIMATIC HMI operator stations 1

SIMATIC HMI operator stations –From a single sourceWherever SIMATIC HMI Panels, Panel PCs and Flat Panelsare used in industrial applications, an ergonomic operatorstation is also necessary. Certain marginal conditions mustbe observed when integrating the HMI devices into a plantor machine.Preconfigured, ready-to-use SIMATIC HMI operator stationsprovide you with a technically sound design, and save youtime and engineering overhead.Fields of applicationPanels and Panel PCs – as typical devices for front mounting –are only IP65-protected at the panel front, and have proventheir suitability for control cabinet installation in many sectors.However, where installation of HMI devices in a control cabinetor directly on the machine is not possible, we recommendusing all-in-one HMI operator stations with pedestal or swivelarmmounting.With the HMI operator stations, all-round IP65 protection isprovided by the special enclosure. Furthermore, there are customizeddevice fronts and also rear mounting versions for specialrequirements, such as in the food & beverages sector.DesignWith the HMI operator station concept, you can select from arange of functionally-compatible combinations of HMI devicesand selected housing. This range of components has beendesigned for:■■■Industrial applicationsIndustry-related applicationsApplications in the food & beveragessectorOptions include single-row or double-rowcontrol elements (3SB series) and the keyboarddrawer.Ergonomic requirements are satisfiedsince pedestal or swivel-arm mounting ispossible. Additional elements permit turningand tilting or height adjustment of the display/controlunit.Further customized adaptations are possible.Ergonomics■■■highlights■■■■■■■Save time and engineering costs by using preconfiguredSIMATIC HMI operator stations with SIMATICMulti Panels, Panel PCs or Flat PanelsRugged all round, tried and tested in practiceErgonomic, technically tested and certifiedSafe operation even under difficult environmentalconditionsAlso suitable for special industriesFor maximum availability and investment securitySupport, service and repair with Siemens qualityFatigue-free and fast operationFast adaptation of operator station to different operatingpersonnelCoherent operating philosophy is easy to learnFunctionality■ Resistant to shock and vibration loads during operation■ Matching choice of devices (SIMATIC HMI devices withdisplay of 10" or more)■ Secure provision of data transmission and access to drivesand interfaces■ Direct machine control (conventional operating elementsfor direct connection to machine units)■ Simple alphanumeric input options■ Possible to connect external keyboard and mouse■ Installation option for specific hardware componentsAvailability■ Environmental conditions taken into account (climate,chemicals, mechanical loads)■ Power losses allowed for■ Protection demands■ Cleaning agents catered for■ Housing properties2

Operator stations for SIMATIC Multi Panels■■Compactdesign throughshallow mountingdepthLow weightallows versatilemountingoptionsVersion 1:EncapsulationVersion 2:Encapsulation with singlerowcontrol panelVersion 3:Encapsulation with doublerowcontrol panelVersion 4:Encapsulation with doublerowcontrol panel and attachedkeyboardOperator stationHMI productsfor installationMulti Panel:Thin Client:MP 277 10" Keys/Touch; MP377 12" Keys/Touch, 15"/19" Touch10"/15" TouchHousing width in mm(min. … max.)Housing height in mm(min. … max.)Housing depth in mm 131Weight in kg(min. … max.)MaterialSurface treatmentDegree of protectionApprovals24 V fanin housingHousing lock444…591384…569 533…5699…11 9…11 10…12 13…15AluminumNatural anodizedIP65CE■ ■ ■ ■HingeControl elements – 3SB, 1-row 3SB, 2-row 3SB, 3-rowKeyboard – – – Attached keyboard withtouchpadPermissible temperature rangeAmbient temperature ofhousing without add-onmoduleMounting optionsSwivel-arm mounting(option)Pedestal mounting(option)0…40 °C■ ■ ■ ■■ ■ ■ ■

Operator stations for SIMATIC Panel PCs and Flat Panels■Rugged,can be used inharsh industrialenvironmentsVersion 1:EncapsulationFlat Panels:Panel PC:Version 2:Encapsulation with singlerowcontrol panelFP 12"/15"/17"/19" Touch; FP 12"/15"/17"/19" display onlyPC 477B 12"/15" Keys/Touch, 19" TouchPC 677B 12"/15" Keys/Touch, 17"/19" TouchVersion 3:Encapsulation with doublerowcontrol panelVersion 4:Encapsulation with doublerowcontrol panel and keyboarddrawerOperator stationHMI productsfor installation509…591 Housing width in mm(min. … max.)419…509 569…659 697…787 Housing height in mm(min. … max.)209 Housing depth in mm23…25 24…28 26…30 27…31 Weight in kg(min. … max.)AluminumNatural anodizedIP65CEMaterialSurface treatmentDegree of protectionApprovals– – – – 24 V fanin housingDouble-bit lockHousing lock3SB, 1-row 3SB, 2-row 3SB, 3-row Control elements– – – In keyboard drawer KeyboardPermissible temperature range5…40 °C without plugged in add-on modules Ambient temperature ofhousing without add-onmoduleMounting options■ ■ ■ ■ Swivel-arm mounting(option)■ ■ ■ ■ Pedestal mounting(option)SIMATIC HMI operator stations 4

SIMATIC HMI operator stations:Functional and safe – ready-to-useComfort panel: Functional and safe■■■■■■■■■New design and supplementary functionsOptimally matched to SIMATIC HMI componentsRear panel screwed on or with hingeWith or without trim designed individually according tocustomer requirementsWraparound soft profile reduces the risk of injury tooperatorsFront frame secured against unhookingWraparound mounting ducts for individual attachmentof accessories internally and externallyIndividual dimensions, equipment and design possibleWith swivel-arm mounting or pedestalAll from one source:Panel PC+ +Customizedsoftware imageHousingincluding wiringReady toinstall and useTurnkey productsReady to use!SIMATIC HMI operator stations 5

SIMATIC HMI operator stations –practical design for practical useOur servicesWe incorporated our experiences gained from an extremelywide range of customized projects in the development of theSIMATIC HMI operator stations. They are characterized by particularlyreliable operation – after all, our built-in solutionshave already been extensively tested in practice and optimizedfor the HMI devices:■■■■■■Elimination of hotspots in the housing as a result of optimuminstallation technologyDetermination of actual maximum permissible ambienttemperature of complete operator station during operation.The power loss of the HMI device is incorporated intothe testsShock and vibration tests of the complete operator stationduring operation to confirm compliance with the loadinglimits for rotating mass media and large displaysThe required degrees of protection and EMC measures areestablished and testedThe quality of the surface, its resistance to abrasion, and itschemical resistance are checkedAll measures to improve the usability of the operator stationsin special environments are designed as far as possibleusing passive technology (e.g. no active air conditioning).The objective is to guarantee long and fault-freeoperation.You thus receive the complete operator station from a singlesource – with the worldwide service facilities of Siemens.Benefits■■■■■■■■■■■■Optimized operator stations – ready-to-useSystem is certified (VDE, CE and UL) and approved100% tested, test results are documented andarchived100% identical devices with customizedconfigurationVariable mounting optionsSafe transportationSoftware versions managed by electronic data processingOnly one Order No.Short delivery time ex-stock or built-to-orderOnly one contact partner, all from a single sourceTested heat balance with specificambient temperature for long-term availabilityModular design for customizedexpansionsModification options■ Customized design for Panel or Panel PC■ Resistant and rugged stainless steel housing with smoothsurface for easy cleaning■ Customized applications for Windows CE-based panels(Open Platform Program)■ Customized control elements■ Active heat dissipation (e.g. small device)■ Ergonomic design with pedestal, wall or swivel-armmounting■ Customized locksSubject to change without prior notice | BS 1007 0.2 ROT 6 DE/801174 | Printed in Germany | © Siemens AG 2007Siemens AGAutomation and DrivesIndustrial Automation SystemsP.O. Box 484890327 NUREMBERGGERMANYwww.siemens.com/automationThe information provided in this brochure contains descriptions or characteristicsof performance which in case of actual use do not always apply as describedor which may change as a result of further development of theproducts. An obligation to provide the respective characteristics shall only existif expressly agreed in the terms of contract. Availability and technical specificationsare subject to change without prior notice.Any product names mentioned may be trademarks or product designations ofSiemens or their suppliers, whose use by third parties for theirown purposes may infringe the rights of the trademark owners.