Views
3 years ago

MC75i AT Command Set - RCC ITALY

MC75i AT Command Set - RCC ITALY

MC75i

MC75i AT Command Set7.2 ATA7.2 ATA Answer a callSyntaxExec CommandATAResponse(s)In case of data call, if successfully connected (TA switches to data mode):CONNECT In case of voice call, if successfully connected:OKWhen TA returns to command mode after call release:OKIf no connection:NO CARRIERPIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge Last Reference(s)+ + + + + + + - - - V.250Command DescriptionTA causes remote station to go off-hook (e.g. answer call).Parameter Description (str)Connection statusoutput only if ATX parameter setting with value greater 0. Connection speed values:“300““1200““2400““4800““9600““14400“Notes• Any additional commands on the same command line are ignored.• The command may be aborted generally by receiving a character during execution. It can't be aborted insome connection setup states, such as handshaking.• If AT+FCLASS setting is 1 or 2, all incoming calls will be answered as fax calls, when ATA is issued on multiplexerchannel 1 resp. ASC0. For calls explicitly signalled as voice or data calls, this procedure will fail withresult code "NO CARRIER", but the call in question will continue to ring.It is possible to change the setting for AT+FCLASS to 0 while the call is ringing, and accept the call normallyafterwards with ATA.• The ATA command may be used also to accept a network request for a PDP context activation (see ATA).• See also ATX for .• If an incoming call is no longer available (already disconnected/hanged up)a "NO CARRIER" result code willbe given.MC75i_ATC_V01.100 Page 156 of 548 11/10/08Confidential / Released

MC75i AT Command Set7.3 ATD7.3 ATD Mobile originated call to specified numberSyntaxExec CommandATD[][;]Response(s)If no dialtone (parameter setting ATX2 or ATX4):NO DIALTONEIf busy (parameter setting ATX3 or ATX4):BUSYIf a connection cannot be set up:NO CARRIERNO DIALTONEIf successfully connected and non-voice call (TA switches to online data mode):CONNECT When TA returns to command mode after call release:OKIf successfully connected and voice call:OKPIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge Last Reference(s)± + ± + + ± ± - - - V.250Command DescriptionThis command can be used to set up outgoing voice, data or fax calls. It also serves to control SupplementaryServices. The termination character ";" is mandatory to set up voice calls or to send *# codes for SupplementaryServices. It must not be used for data and fax calls.Additional notes on the responses returned after dialing with ATD:• For voice calls, you have the choice of two different response modes that can be selected with AT^SM20:AT^SM20=1 (factory default) causes the ME to respond once the call setup is completed either successfully("OK") or unsuccessfully ("NO CARRIER", "NO DIAL TONE", "BUSY").AT^SM20=0 causes the ME to return "OK" immediately after dialing was completed (i.e. before call setup terminatessuccessfully or unsuccessfully).• For data connections, call setup always terminates when the call has been established (indicated by the resultcode "CONNECT "), or when it fails (indicated by "NO CARRIER"). The settings of AT^SM20 do notapply.Different call release indications:• Upon termination, an outgoing fax or data call may show a different result code than a voice call would showunder identical conditions. In order to track down the actual reason for call termination, AT+CEER or ATS18should be used for all applicable connections.Using ATD during an active call:• When a user originates a second voice call while there is already an active voice call, the first call will automaticallyput on hold. The second call attempt is acknowledged with "OK" immediately after dialing with ATDhas completed, without relation to a successful call setup. In case of failure, the additional result codes "NOCARRIER", "NO DIAL TONE", "NO CARRIER" will be presented afterwards (see example below).Parameter Description (text)String of dialing digits and optional V.250 modifiers: 0-9, *, #, +, A, B, CThe following V.250 modifiers are ignored: ,(comma), T, P, !, W ,@MC75i_ATC_V01.100 Page 157 of 548 11/10/08Confidential / Released

  • Page 1 and 2:

    MC75iVersion: 01.100DocId: MC75i_AT

  • Page 3 and 4:

    MC75i AT Command SetContentsContent

  • Page 5:

    MC75i AT Command SetContents6.4 AT+

  • Page 8 and 9:

    MC75i AT Command SetContents12.1.1

  • Page 10 and 11:

    MC75i AT Command SetContents19. Har

  • Page 12 and 13:

    MC75i AT Command SetList of Figures

  • Page 14 and 15:

    MC75i AT Command Set1.2 Related doc

  • Page 16 and 17:

    MC75i AT Command Set1.3 Document co

  • Page 18 and 19:

    MC75i AT Command Set1.4 AT Command

  • Page 20 and 21:

    MC75i AT Command Set1.6 Supported c

  • Page 22 and 23:

    MC75i AT Command Set1.6 Supported c

  • Page 24 and 25:

    MC75i AT Command Set1.6 Supported c

  • Page 26 and 27:

    MC75i AT Command Set1.8 Errors and

  • Page 28 and 29:

    MC75i AT Command Set1.10 Serial Int

  • Page 30 and 31:

    MC75i AT Command Set1.11 Common PCN

  • Page 32 and 33:

    MC75i AT Command Set2.2 AT&V2.2 AT&

  • Page 34 and 35:

    MC75i AT Command Set2.2 AT&VTable 2

  • Page 36 and 37:

    MC75i AT Command Set2.4 ATQ2.4 ATQ

  • Page 38 and 39:

    MC75i AT Command Set2.6 ATX2.6 ATX

  • Page 40 and 41:

    MC75i AT Command Set2.8 ATZ2.8 ATZ

  • Page 42 and 43:

    MC75i AT Command Set2.9 AT+CFUNUnso

  • Page 44 and 45:

    MC75i AT Command Set2.9 AT+CFUN2.9.

  • Page 46 and 47:

    MC75i AT Command Set2.11 AT+GCAP2.1

  • Page 48 and 49:

    MC75i AT Command Set2.12 AT+CMEE2.1

  • Page 50 and 51:

    MC75i AT Command Set2.12 AT+CMEE Co

  • Page 52 and 53:

    MC75i AT Command Set2.12 AT+CMEE Co

  • Page 54 and 55:

    MC75i AT Command Set2.12 AT+CMEE Co

  • Page 56 and 57:

    MC75i AT Command Set2.14 AT^SCFG2.1

  • Page 58 and 59:

    MC75i AT Command Set2.14 AT^SCFGWri

  • Page 60 and 61:

    MC75i AT Command Set2.14 AT^SCFGWri

  • Page 62 and 63:

    MC75i AT Command Set2.14 AT^SCFGURC

  • Page 64 and 65:

    MC75i AT Command Set2.14 AT^SCFG (s

  • Page 66 and 67:

    MC75i AT Command Set2.14 AT^SCFG (s

  • Page 68 and 69:

    MC75i AT Command Set2.14 AT^SCFGuse

  • Page 70 and 71:

    MC75i AT Command Set2.14 AT^SCFGThi

  • Page 72 and 73:

    MC75i AT Command Set2.14 AT^SCFG“

  • Page 74 and 75:

    MC75i AT Command Set2.14 AT^SCFG (s

  • Page 76 and 77:

    MC75i AT Command Set2.14 AT^SCFGAT^

  • Page 78 and 79:

    MC75i AT Command Set3. Status Contr

  • Page 80 and 81:

    MC75i AT Command Set3.2 AT+CIND3.2

  • Page 82 and 83:

    MC75i AT Command Set3.2 AT+CINDNote

  • Page 84 and 85:

    MC75i AT Command Set3.3 AT^SINDWrit

  • Page 86 and 87:

    MC75i AT Command Set3.3 AT^SINDIf t

  • Page 88 and 89:

    MC75i AT Command Set3.3 AT^SIND“b

  • Page 90 and 91:

    MC75i AT Command Set3.3 AT^SIND (nu

  • Page 92 and 93:

    MC75i AT Command Set3.4 AT+CEER3.4

  • Page 94 and 95:

    MC75i AT Command Set3.4 AT+CEERIDDe

  • Page 96 and 97:

    MC75i AT Command Set3.4 AT+CEERNumb

  • Page 98 and 99:

    MC75i AT Command Set3.4 AT+CEERNumb

  • Page 100 and 101:

    MC75i AT Command Set3.4 AT+CEER3.4.

  • Page 102 and 103:

    MC75i AT Command Set3.5 ATS18Exampl

  • Page 104 and 105:

    MC75i AT Command Set3.7 AT+WS463.7

  • Page 106 and 107: MC75i AT Command Set4.2 AT&C4.2 AT&
  • Page 108 and 109: MC75i AT Command Set4.4 AT&S4.4 AT&
  • Page 110 and 111: MC75i AT Command Set4.6 AT+IFC4.6 A
  • Page 112 and 113: MC75i AT Command Set4.7 AT+ICF4.7 A
  • Page 114 and 115: MC75i AT Command Set4.8 AT+ILRR4.8
  • Page 116 and 117: MC75i AT Command Set4.9 AT+IPR4.9 A
  • Page 118 and 119: MC75i AT Command Set4.9 AT+IPR- URC
  • Page 120 and 121: MC75i AT Command Set4.10 AT+CMUXPar
  • Page 122 and 123: MC75i AT Command Set4.11 AT^STPB4.1
  • Page 124 and 125: MC75i AT Command Set5.1 AT+CPINPara
  • Page 126 and 127: MC75i AT Command Set5.1 AT+CPINNumb
  • Page 128 and 129: MC75i AT Command Set5.2 AT+CPIN2Not
  • Page 130 and 131: MC75i AT Command Set5.3 AT^SPIC (st
  • Page 132 and 133: MC75i AT Command Set5.3 AT^SPICat+c
  • Page 134 and 135: MC75i AT Command Set5.4 AT+CLCK“F
  • Page 136 and 137: MC75i AT Command Set5.4 AT+CLCKNote
  • Page 138 and 139: MC75i AT Command Set5.5 AT^SLCK5.5
  • Page 140 and 141: MC75i AT Command Set5.6 AT+CPWD“P
  • Page 142 and 143: MC75i AT Command Set5.6 AT+CPWDEXAM
  • Page 144 and 145: MC75i AT Command Set5.7 AT^SPWDPara
  • Page 146 and 147: MC75i AT Command Set5.8 AT^SCSL (st
  • Page 148 and 149: MC75i AT Command Set5.8 AT^SCSLAT+C
  • Page 150 and 151: MC75i AT Command Set6.2 AT+CGMI6.2
  • Page 152 and 153: MC75i AT Command Set6.6 AT+CGMR6.6
  • Page 154 and 155: MC75i AT Command Set6.10 AT+CIMI6.1
  • Page 158 and 159: MC75i AT Command Set7.3 ATD (str)St
  • Page 160 and 161: MC75i AT Command Set7.4 ATD> (str)S
  • Page 162 and 163: MC75i AT Command Set7.6 ATD>7.6 ATD
  • Page 164 and 165: MC75i AT Command Set7.8 ATDL7.8 ATD
  • Page 166 and 167: MC75i AT Command Set7.10 AT+CHUP7.1
  • Page 169 and 170: MC75i AT Command Set7.12 ATS07.12 A
  • Page 171 and 172: MC75i AT Command Set7.14 ATS67.14 A
  • Page 173 and 174: MC75i AT Command Set7.16 ATS87.16 A
  • Page 175 and 176: MC75i AT Command Set7.18 ATO7.18 AT
  • Page 177 and 178: MC75i AT Command Set7.20 AT+CBST7.2
  • Page 179 and 180: MC75i AT Command Set7.21 AT+CRLP7.2
  • Page 181 and 182: MC75i AT Command Set7.22 AT+CLCC3 V
  • Page 183 and 184: MC75i AT Command Set7.23 AT^SLCCUns
  • Page 185 and 186: MC75i AT Command Set7.23 AT^SLCCNot
  • Page 187 and 188: MC75i AT Command Set7.24 AT+CR7.24
  • Page 189 and 190: MC75i AT Command Set7.26 AT+CSNS7.2
  • Page 191 and 192: MC75i AT Command Set7.28 AT^SLCD7.2
  • Page 193 and 194: MC75i AT Command Set7.30 ATP7.30 AT
  • Page 195 and 196: MC75i AT Command Set8.2 AT+COPS8.2
  • Page 197 and 198: MC75i AT Command Set8.2 AT+COPS (nu
  • Page 199 and 200: MC75i AT Command Set8.3 AT^SOPS (st
  • Page 201 and 202: MC75i AT Command Set8.4 AT+CREG (nu
  • Page 203 and 204: MC75i AT Command Set8.5 AT+CSQ8.5 A
  • Page 205 and 206: MC75i AT Command Set8.6 AT^SMONC (n
  • Page 207 and 208:

    MC75i AT Command Set8.7 AT^SMOND (n

  • Page 209 and 210:

    MC75i AT Command Set8.8 AT^SFNUR8.8

  • Page 211 and 212:

    MC75i AT Command Set8.9 AT^MONI8.9.

  • Page 213 and 214:

    MC75i AT Command Set8.10 AT^MONP8.1

  • Page 215 and 216:

    MC75i AT Command Set8.11 AT^SMONG8.

  • Page 217 and 218:

    MC75i AT Command Set8.12 AT^SALS8.1

  • Page 219 and 220:

    MC75i AT Command Set8.13 AT^SHOM8.1

  • Page 221 and 222:

    MC75i AT Command Set8.15 AT+CPOL8.1

  • Page 223 and 224:

    MC75i AT Command Set9.2 AT^SACM9.2

  • Page 225 and 226:

    MC75i AT Command Set9.3 AT+CAMM9.3

  • Page 227 and 228:

    MC75i AT Command Set9.5 AT+CCUG9.5

  • Page 229 and 230:

    MC75i AT Command Set9.6 AT+CCFC9.6

  • Page 231 and 232:

    MC75i AT Command Set9.6 AT+CCFC•

  • Page 233 and 234:

    MC75i AT Command Set9.7 AT+CCWA9.7

  • Page 235 and 236:

    MC75i AT Command Set9.7 AT+CCWA128

  • Page 237 and 238:

    MC75i AT Command Set9.8 AT+CHLD9.8

  • Page 239 and 240:

    MC75i AT Command Set9.9 AT+CLIP9.9

  • Page 241 and 242:

    MC75i AT Command Set9.10 AT+CLIR9.1

  • Page 243 and 244:

    MC75i AT Command Set9.11 AT+COLP (n

  • Page 245 and 246:

    MC75i AT Command Set9.12 AT+CPUCExa

  • Page 247 and 248:

    MC75i AT Command Set9.13 AT+CSSN (n

  • Page 249 and 250:

    MC75i AT Command Set9.14 AT+CUSD (s

  • Page 251 and 252:

    MC75i AT Command Setneed to do so s

  • Page 253 and 254:

    MC75i AT Command Set10.1 AT^SICS10.

  • Page 255 and 256:

    MC75i AT Command Set10.1 AT^SICS“

  • Page 257 and 258:

    MC75i AT Command Set10.1 AT^SICS^SI

  • Page 259 and 260:

    MC75i AT Command Set10.2 AT^SICI (n

  • Page 261 and 262:

    MC75i AT Command Set10.3 AT^SISS10.

  • Page 263 and 264:

    MC75i AT Command Set10.3 AT^SISSSyn

  • Page 265 and 266:

    MC75i AT Command Set10.3 AT^SISShcC

  • Page 267 and 268:

    MC75i AT Command Set10.3 AT^SISSsmH

  • Page 269 and 270:

    MC75i AT Command Set10.3 AT^SISSPOP

  • Page 271 and 272:

    MC75i AT Command Set10.4 AT^SISIPar

  • Page 273 and 274:

    MC75i AT Command Set10.5 AT^SISORea

  • Page 275 and 276:

    MC75i AT Command Set10.5 AT^SISO•

  • Page 277 and 278:

    MC75i AT Command Set10.5 AT^SISO^SI

  • Page 279 and 280:

    MC75i AT Command Set10.7 AT^SISR10.

  • Page 281 and 282:

    MC75i AT Command Set10.7 AT^SISR10.

  • Page 283 and 284:

    MC75i AT Command Set10.8 AT^SISW•

  • Page 285 and 286:

    MC75i AT Command Set10.8 AT^SISWSer

  • Page 287 and 288:

    MC75i AT Command Set10.9 AT^SICO (s

  • Page 289 and 290:

    MC75i AT Command Set10.11 AT^SISX10

  • Page 291 and 292:

    MC75i AT Command Set10.11 AT^SISX (

  • Page 293 and 294:

    MC75i AT Command Set10.13 Internet

  • Page 295 and 296:

    MC75i AT Command Set10.13 Internet

  • Page 297 and 298:

    MC75i AT Command Set10.14 Examples

  • Page 299 and 300:

    MC75i AT Command Set10.14 Examples

  • Page 301 and 302:

    MC75i AT Command Set10.14 Examples

  • Page 303 and 304:

    MC75i AT Command Set10.14 Examples

  • Page 305 and 306:

    MC75i AT Command Set10.14 Examples

  • Page 307 and 308:

    MC75i AT Command Set10.14 Examples

  • Page 309 and 310:

    MC75i AT Command Set11. GPRS Comman

  • Page 311 and 312:

    MC75i AT Command Set11.2 AT+CGANS11

  • Page 313 and 314:

    MC75i AT Command Set11.3 AT+CGATT11

  • Page 315 and 316:

    MC75i AT Command Set11.4 AT+CGAUTO

  • Page 317 and 318:

    MC75i AT Command Set11.5 AT+CGDATAN

  • Page 319 and 320:

    MC75i AT Command Set11.6 AT+CGDCONT

  • Page 321 and 322:

    MC75i AT Command Set11.7 AT+CGEQMIN

  • Page 323 and 324:

    MC75i AT Command Set11.7 AT+CGEQMIN

  • Page 325 and 326:

    MC75i AT Command Set11.8 AT+CGEQREQ

  • Page 327 and 328:

    MC75i AT Command Set11.8 AT+CGEQREQ

  • Page 329 and 330:

    MC75i AT Command Set11.10 AT+CGQMIN

  • Page 331 and 332:

    MC75i AT Command Set11.10 AT+CGQMIN

  • Page 333 and 334:

    MC75i AT Command Set11.11 AT+CGQREQ

  • Page 335 and 336:

    MC75i AT Command Set11.11 AT+CGQREQ

  • Page 337 and 338:

    MC75i AT Command Set11.12 AT+CGREG1

  • Page 339 and 340:

    MC75i AT Command Set11.13 AT+CGSMS1

  • Page 341 and 342:

    MC75i AT Command Set11.14 AT^SGACT

  • Page 343 and 344:

    MC75i AT Command Set11.16 AT^SGCONF

  • Page 345 and 346:

    MC75i AT Command Set11.17 ATA11.17

  • Page 347 and 348:

    MC75i AT Command Set11.19 ATD*98#11

  • Page 349 and 350:

    MC75i AT Command Set11.21 ATS011.21

  • Page 351 and 352:

    MC75i AT Command Set11.22 Using GPR

  • Page 353 and 354:

    MC75i AT Command Set12. FAX Command

  • Page 355 and 356:

    MC75i AT Command Set12.3 AT+FRH12.3

  • Page 357 and 358:

    MC75i AT Command Set12.5 AT+FRS12.5

  • Page 359 and 360:

    MC75i AT Command Set12.7 AT+FTM12.7

  • Page 361 and 362:

    MC75i AT Command Set13. Short Messa

  • Page 363 and 364:

    MC75i AT Command Set13.1 SMS parame

  • Page 365 and 366:

    MC75i AT Command Set13.1 SMS parame

  • Page 367 and 368:

    MC75i AT Command Set13.3 AT+CMGD13.

  • Page 369 and 370:

    MC75i AT Command Set13.5 AT+CMGL13.

  • Page 371 and 372:

    MC75i AT Command Set13.6 AT+CMGR13.

  • Page 373 and 374:

    MC75i AT Command Set13.7 AT+CMGS13.

  • Page 375 and 376:

    MC75i AT Command Set13.8 AT+CMGW13.

  • Page 377 and 378:

    MC75i AT Command Set13.9 AT+CMSS13.

  • Page 379 and 380:

    MC75i AT Command Set13.11 AT+CNMI13

  • Page 381 and 382:

    MC75i AT Command Set13.11 AT+CNMI2

  • Page 383 and 384:

    MC75i AT Command Set13.12 AT+CPMSNo

  • Page 385 and 386:

    MC75i AT Command Set13.14 AT+CSCB13

  • Page 387 and 388:

    MC75i AT Command Set13.16 AT+CSMP13

  • Page 389 and 390:

    MC75i AT Command Set13.17 AT+CSMS13

  • Page 391 and 392:

    MC75i AT Command Set13.18 AT^SCML13

  • Page 393 and 394:

    MC75i AT Command Set13.20 AT^SCMS13

  • Page 395 and 396:

    MC75i AT Command Set13.22 AT^SLMS13

  • Page 397 and 398:

    MC75i AT Command Set13.24 AT^SMGO13

  • Page 399 and 400:

    MC75i AT Command Set13.25 AT^SMGR13

  • Page 401 and 402:

    MC75i AT Command Set13.27 AT^SSDA13

  • Page 403 and 404:

    MC75i AT Command Set14. SIM related

  • Page 405 and 406:

    MC75i AT Command Set14.1 AT+CRSM (n

  • Page 407 and 408:

    MC75i AT Command Set14.2 AT+CSIMAT+

  • Page 409 and 410:

    MC75i AT Command Set14.4 AT^SXSM14.

  • Page 411 and 412:

    MC75i AT Command Set14.5 AT^SCKS14.

  • Page 413 and 414:

    MC75i AT Command Set14.6 AT^SSET14.

  • Page 415 and 416:

    MC75i AT Command Set14.8 AT+CXXCID1

  • Page 417 and 418:

    MC75i AT Command SetThe MC75i can o

  • Page 419 and 420:

    MC75i AT Command Set15.1 AT^SRSA15.

  • Page 421 and 422:

    MC75i AT Command Set15.1 AT^SRSA (n

  • Page 423 and 424:

    MC75i AT Command Set15.2 AT^SRSM15.

  • Page 425 and 426:

    MC75i AT Command Set15.2 AT^SRSMExa

  • Page 427 and 428:

    MC75i AT Command Set15.3 Related AT

  • Page 429 and 430:

    MC75i AT Command Set16. SIM Applica

  • Page 431 and 432:

    MC75i AT Command Set16.2 ^SSTN16.2

  • Page 433 and 434:

    MC75i AT Command Set16.4 AT^SSTR16.

  • Page 435 and 436:

    MC75i AT Command Set17. Phonebook C

  • Page 437 and 438:

    MC75i AT Command Set17.3 AT+CPBR17.

  • Page 439 and 440:

    MC75i AT Command Set17.3 AT+CPBRExa

  • Page 441 and 442:

    MC75i AT Command Set17.4 AT+CPBS“

  • Page 443 and 444:

    MC75i AT Command Set17.5 AT+CPBW (n

  • Page 445 and 446:

    MC75i AT Command Set17.6 AT^SPBW17.

  • Page 447 and 448:

    MC75i AT Command Set17.6 AT^SPBWExa

  • Page 449 and 450:

    MC75i AT Command Set17.8 AT^SPBC17.

  • Page 451 and 452:

    MC75i AT Command Set17.10 AT^SPBG17

  • Page 453 and 454:

    MC75i AT Command Set17.10 AT^SPBG (

  • Page 455 and 456:

    MC75i AT Command Set17.11 AT^SPBSAf

  • Page 457 and 458:

    MC75i AT Command Set17.11 AT^SPBSEX

  • Page 459 and 460:

    MC75i AT Command Set18.2 ATL18.2 AT

  • Page 461 and 462:

    MC75i AT Command Set18.5 AT+CMUT18.

  • Page 463 and 464:

    MC75i AT Command Set18.7 AT+VTS18.7

  • Page 465 and 466:

    MC75i AT Command Set18.8 AT^SAIC2 S

  • Page 467 and 468:

    MC75i AT Command Set18.9 AT^SNFAExa

  • Page 469 and 470:

    MC75i AT Command Set18.11 AT^SNFG18

  • Page 471 and 472:

    MC75i AT Command Set18.12 AT^SNFI18

  • Page 473 and 474:

    MC75i AT Command Set18.13 AT^SNFM (

  • Page 475 and 476:

    MC75i AT Command Set18.14 AT^SNFO (

  • Page 477 and 478:

    MC75i AT Command Set18.16 AT^SNFS18

  • Page 479 and 480:

    MC75i AT Command Set18.16 AT^SNFSAT

  • Page 481 and 482:

    MC75i AT Command Set18.17 AT^SNFTTY

  • Page 483 and 484:

    MC75i AT Command Set18.19 AT^SNFW18

  • Page 485 and 486:

    MC75i AT Command Set18.20 AT^SRTCPa

  • Page 487 and 488:

    MC75i AT Command Set19.2 AT+CALA19.

  • Page 489 and 490:

    MC75i AT Command Set19.2 AT+CALA•

  • Page 491 and 492:

    MC75i AT Command Set19.3 AT^SBCURC

  • Page 493 and 494:

    MC75i AT Command Set19.4 AT^SBV19.4

  • Page 495 and 496:

    MC75i AT Command Set19.5 AT^SCTMCom

  • Page 497 and 498:

    MC75i AT Command Set19.6 AT^SSYNC19

  • Page 499 and 500:

    MC75i AT Command Set19.6 AT^SSYNCLE

  • Page 501 and 502:

    MC75i AT Command Set19.7 AT^SSPI (n

  • Page 503 and 504:

    MC75i AT Command Set19.7 AT^SSPI19.

  • Page 505 and 506:

    MC75i AT Command Set19.7 AT^SSPIMes

  • Page 507 and 508:

    MC75i AT Command Set19.7 AT^SSPIwhe

  • Page 509 and 510:

    MC75i AT Command Set19.7 AT^SSPI19.

  • Page 511 and 512:

    MC75i AT Command Set20.2 ATS320.2 A

  • Page 513 and 514:

    MC75i AT Command Set20.4 ATS520.4 A

  • Page 515 and 516:

    MC75i AT Command Set21. Appendix21.

  • Page 517 and 518:

    MC75i AT Command Set21.2 Star-Hash

  • Page 519 and 520:

    MC75i AT Command Set21.3 Available

  • Page 521 and 522:

    MC75i AT Command Set21.3 Available

  • Page 523 and 524:

    MC75i AT Command Set21.3 Available

  • Page 525 and 526:

    MC75i AT Command Set21.3 Available

  • Page 527 and 528:

    MC75i AT Command Set21.4 Availabili

  • Page 529 and 530:

    MC75i AT Command Set21.4 Availabili

  • Page 531 and 532:

    MC75i AT Command Set21.4 Availabili

  • Page 533 and 534:

    MC75i AT Command Set21.5 AT Command

  • Page 535 and 536:

    MC75i AT Command Set21.5 AT Command

  • Page 537 and 538:

    MC75i AT Command Set21.6 Factory De

  • Page 539 and 540:

    MC75i AT Command Set21.7 Summary of

  • Page 541 and 542:

    MC75i AT Command Set21.7 Summary of

  • Page 543 and 544:

    MC75i AT Command Set21.9 Alphabetic

  • Page 545 and 546:

    MC75i AT Command Set21.9 Alphabetic

  • Page 547 and 548:

    MC75i AT Command Set21.9 Alphabetic

TC35i AT Command Set
AC75i AT Command Set
MC55i AT Command Set
AT Command Set
TC35i AT Command Set
MC55i AT Command Set - SEA
TC65 AT Command Set
MC75 AT Command Set
TC63i AT Command Set
XT65 AT Command Set - GSE
MC52i AT Command Set
MC35i AT Command Set
TC35i AT Command Set
AT Command Set - Olitec
MC56 AT Command Set
HC25 AT Command Set
HC25 AT Command Set - SEA
HC15 AT Command Set
AT Commands Set
AT Commands Set
EU3-E AT Command Set - SEA