MC75i AT Command Set - RCC ITALY

MC75i

MC75i AT Command Set10.14 Examples of how to Configure and Use Internet Service Profiles10.14.13 Retrieving Email (URC Mode)This example uses the service profile described in Section 10.14.12.at^siso=1OK^SISR: 1, 1at^sisr=1,500^SISR: 1, 500Open the service that was created to retrieve emailnumber 2 from the POP3 server.The "^SISR" indicates that data is available for reading.Try to read 500 bytes.Command response indicates that 500 bytes will betransferred, i.e. there will be no other URC since therequested length equals the confirmed length.Return-Path: X-Original-To: subscriber1@testdomain.comDelivered-To: subscriber2@testdomain.comReceived: from 10.10.0.132 (unknown [10.10.0.132])by testdomain.com (Postfix) with SMTP id 379321D004for ; Tue, 20 Dec 2005 08:00:07 +0100 (CET)To: subscriber2@testdomain.comCc:From: subscriber1@testdomain.comSubject: TestMailMessage-Id: Date: Tue, 20 Dec 2005 08:00:07 +0100OKat^sisr=1,500at^sisr=1,78(CET)X-UIDL: &lL"!(Z6"!^cl!!1+%"!Status: ROTry to read another 500 bytes.Command response indicates that only 78 bytes willtransferred.Hallo Tom!Bye Bye Tom!. Dot indicates end of mail according to RFC 2821.OK^SISR: 1, 2Parameter of the "^SISR" URCconfirms that all data is transferred successfully.at^sisc=1Close the service.OK10.14.14 Retrieving Email (Polling Mode)This example uses the service profile described in Section 10.14.12.at^siso=1OKat^sisr=1,1000^SISR: 1, 0OKat^sisr=1,1000^SISR: 1, 0OKat^sisr=1,1000Open the service that was created to retrieve emailnumber 2 from the POP3 server.Try to read 1000 bytes.Command response indicates that currently no datais available.Again, try to read 1000 bytes.Command response indicates that currently no datais available.Again, try to read 1000 bytes.MC75i_ATC_V01.100 Page 306 of 548 11/10/08Confidential / Released

MC75i AT Command Set10.14 Examples of how to Configure and Use Internet Service Profiles^SISR: 1, 578Command response indicates that 578 bytes areavailable for reading.Return-Path: X-Original-To: subscriber1@testdomain.comDelivered-To: subscriber2@testdomain.comReceived: from 10.10.0.132 (unknown [10.10.0.132])by testdomain.com (Postfix) with SMTP id 379321D004for ; Tue, 20 Dec 2005 08:00:07 +0100 (CET)To: subscriber2@testdomain.comCc:From: subscriber1@testdomain.comSubject: TestMailMessage-Id: Date: Tue, 20 Dec 2005 08:00:07 +0100 (CET)X-UIDL: &lL"!(Z6"!^cl!!1+%"!Status: ROHallo Tom!Bye Bye Tom!. Dot indicates end of mail according to RFC 2821.OKat^sisr=1,1000^SISR: 1,-2Try to read 1000 bytes once again.No more data available to read, i.e. the service hasfinished.OKat^sisi=1 Check the connection state of service profile 1.^SISI: 1,6,578,0,0,0The command response indicates that the POP3OKservice is in state "6" (Down) and that 578 bytes havebeen retrieved.at^sise=1 Check error status of service profile 1.^SISE: 1,0The command response confirms that no erroroccurred.OKat^sisc=1OKClose the service.10.14.15 HTTP POST (Polling Mode)at^siss=1,srvType,"Http"Select service type HTTP.OKat^siss=1,conId,1 Select connection profile 1.OKat^siss=1,hcMethod,1Select "Post" method.OKat^siss=1,address,"http://192.168.1.3/datafiles/dummy/dummy.txt"OKat^siss=1,hcContLen,180Try to upload 180 bytes.OKat^siso=1Open the service.OKat^sisw=1,100Send the first 100 bytes.^SISW: 1, 100, 0OKat^sisw=1,100Try to send again 100 bytes.^SISW: 1, 80, 080 bytes are sent.OKat^sisw=1,40Try to write data once again.MC75i_ATC_V01.100 Page 307 of 548 11/10/08Confidential / Released