Views
3 years ago

Peek 2070L Operating Manual - Quality Traffic Systems

Peek 2070L Operating Manual - Quality Traffic Systems

Section 6 — Theory of

Section 6 — Theory of Operationvalue shall be loaded into the MC at the next 0-1 transition of theLINESYNC signal. The frames are as follows:(TEES-2002: Section 9.3.9.4 - Configure Inputs)The Configure Inputs command frame shall be used to change inputconfigurations. The command-response frames are as follows:Block field definitions shall be as follows:E - Ignore Input Flag. "1" = do not report transitions for this input,"0" = report transitions for this inpute - A one-byte leading edge filter specifying the number ofconsecutive input samples which must be "0" before the input isconsidered to have entered to "0" state from "1" state (range 1to 255, 0 = disabled)r - A one-byte trailing edge filter specifying the number ofconsecutive input samples which must be "1" before the input isconsidered to have entered to "1" state from "0" state (range 1to 255, 0 = disabled)S - return status S = '0' on completion or '1' on error(TEES-2002: Section 9.3.9.5 - Poll Raw Input Data)The Poll Raw Input Data frame shall be used to poll the FI/O for thecurrent unfiltered status of all inputs. The response frame shall contain50 • Model 2070L Operating Manual

Detailed Systems Description8 bytes of information indicating the current input status. The framesare as follows:Description msb lsb Byte Number(Type Number = 52) 0 0 1 1 0 1 0 0 1Poll Raw Input Data ResponseDescription msb lsb Byte Number(Type Number = 180) 1 0 1 1 0 1 0 0 1Inputs I0 (lsb) to I7 (msb) x x x x x x x x 2Inputs I8 to I63 x x x x x x x x 3 to 9Timestamp MSB x x x x x x x x 10Timestamp NMSB x x x x x x x x 11Timestamp NLSB x x x x x x x x 12Timestamp LSB x x x x x x x x 13(TEES-2002: Section 9.3.9.6 - Poll Filtered Input Data)The Poll Filtered Input Data frame shall be used to poll the FI/O for thecurrent filtered status of all inputs. The response frame shall contain 8bytes of information indicating the current filtered status of the inputs.Raw input data shall be provided in the response for inputs that are notconfigured for filtering. The frames are as follows:Poll Filter Input Data CommandDescription msb lsb Byte Number(Type Number = 53) 0 0 1 1 0 1 0 1 1Poll Filter Input Data ResponseDescription msb lsb Byte Number(Type Number = 181) 1 0 1 1 0 1 0 1 1Inputs I0 (lsb) to I7 (msb) x x x x x x x x 2Inputs I8 to I63 x x x x x x x x 3 to 9Timestamp MSB x x x x x x x x 10Timestamp NMSB x x x x x x x x 11Timestamp NLSB x x x x x x x x 12Timestamp LSB x x x x x x x x 13(TEES-2002: Section 9.3.9.7 - Poll Input Transition Buffer)The Poll Input Transition Buffer frame shall poll the FI/O for thecontents of the input transition buffer. The response frame shall includeModel 2070L Operating Manual • 51

Installation and Operating Manual 262-30T Temperature ... - Crompton
av system controller installation and operation manual - SDS Music ...
Transportation Operations Group - Traffic Signal Systems Committee
Installation and Operating Manual System Protection Relay Energy ...
Operators and Installation Manual TR-810.pdf - Jotron
KiPro Mini Operations Manual
Operational and traffic control system for the Espiye-Sarp tunnels
LTI 20.20 UltraLyte 1000 Operations Manual - Tele-Traffic
RS25 VHF Operation Manual - English - Simrad Yachting
Operators and Installation Manual RA-2500 AIS Receiver.pdf - Jotron
RaySol System Installation and Operation Manual - California ...
Operating the Novus FXM - Interprovincial Traffic Services
Operating Manual - SCHNIER Elektrostatik GmbH
Data Quality Issues in Traffic Systems - Lakeside Conference
Innovator SIP Operating System and Installation Manual - 1CTI
Protégé SE Integrated System Controller Installation Manual
Operating Instructions - Manuals, Specs & Warranty - Sony
Fax Operators Manual - Zoom Imaging Solutions, Inc.
Operation Manual DeckLink Series - Go Electronic