Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ppb<strong>RAE</strong> <strong>3000</strong> User’s <strong>Guide</strong>To install the adapter in the instrument:1. Remove the Li-ion battery pack from the batterycompartment by sliding the tab and tilting out the battery.2. Replace it with the alkaline battery adapter3. Slide the tab back into place to secure the battery adapter.IMPORTANT!Alkaline batteries cannot be recharged. The instrument’s internalcircuit detects alkaline batteries and will not allow recharging. If youplace the instrument in its cradle, the alkaline battery will not berecharged. The internal charging circuit is designed to preventdamage to alkaline batteries and the charging circuit when alkalinebatteries are installed inside the instrument.Note: When replacing alkaline batteries, dispose of old ones properly.WARNING!To reduce the risk of ignition of hazardous atmospheres, recharge thebattery only in areas known to be non-hazardous. Remove and replacethe battery only in areas known to be non-hazardous.Note: The internal charging circuit is designed to prevent charging toalkaline batteries.92
Change language