Views
2 years ago

Jerome ® Communications Software (JCS) - Arizona Instrument

Jerome ® Communications Software (JCS) - Arizona Instrument

6. Operation6.1.

6. Operation6.1. Instrument operation from the computerConnect the JCS Interface Cable’s“PC” connector to the computer and the“INSTRUMENT” connector to theinstrument.Ensure that the middle connector is notattached to the Data Logger.Launch JCS on the PC.If all preliminary set-up procedureshave been completed and theinstrument is turned ON,‣ Click on Instrument.‣ Click on Auto Sample.‣ Select the Site/Location.‣ Select the Technician.‣ Select the Instrument.‣ Enter or verify the Sample Interval.‣ Enter or verify the Alarm Level.‣ Add a comment if desired.‣ Click on the Start button.The instrument should take one sample within a few seconds and repeatedly thereafterat the preset rate.Page 22 of 24AZI Customer Service 602-470-1414, 800-528-7411, or support@azic.com

6.2. Instrument operation from the Data LoggerEnsure the instrument is turned OFFConnect the JCS Interface Cable’s “PC”connector to the computer, the “DATALOGGER” connector to the Jerome ®Data Logger, and the “INSTRUMENT”connector to the instrument.Launch the JCS program on the PC.If all preliminary set-up procedures havebeen completed,‣ Turn the instrument ON.‣ Click on Data Logger.‣ Click on Program.‣ Enter the Sample Interval and AlarmSetpoint.‣ Click on Program.Turn the instrument OFFDisconnect the JCS Interface Cable from the instrument and from the Data Logger.Connect the Data Logger directlyonto the instrument.When the instrument is at thelocation for sampling:‣ Turn the instrument ON.‣ Press the Sample Button on theinstrument.When sampling is complete:‣ Turn the instrument OFF.‣ Remove the Data Logger fromthe instrument.‣ Connect the JCS InterfaceCable’s “PC” connector to thecomputer, the “DATA LOGGER” connector to the Jerome ® Data Logger, and the“INSTRUMENT” connector to the instrument.‣ Turn the computer on if necessary, and launch the JCS program.‣ Turn the instrument ON.‣ Click on Data Logger.‣ Click on Retrieve Data.The data from the Data Logger will be placed in the database and be available forreview and/or printing.Turn the instrument OFF and remove all cabling when finished.AZI Customer Service 602-470-1414, 800-528-7411, or support@azic.com Page 23 of 24

Download the packet - Arizona Community Foundation
Magaya Software Communications Manual
Software will be Instrumental in the Field of the Future - Subsea UK
alexys™ analyzers - SiSW >> Science Instruments and Software
Black Philanthropy Survey - Arizona Community Foundation
Report To The Community - 2003 - Arizona Center for Disability Law
2012 Annual Report - Arizona Community Foundation
PMI – Power Management Instruments
Viscometer & Rheometry – The Range - MEP Instruments
Inverter - PMI – Power Management Instruments
Power Management Instruments - PMI – Power Management ...
YEARS OF COMMUNICATIONS IN TANZANIA — -
the Arizona Choir university Community Chorus ... - School of Music
Here - CSC Center for Strategic Communication - Arizona State ...
Report to the Community Be More - Eight, Arizona PBS
MX Series II Modules - SiSW >> Science Instruments and Software
Session 5A – South Arizona Avenue Improvement Project - azite
Kristy Stecker & “Artist N Motion” - Arizona Appaloosa Association
What is an open source software community? - OSS Watch
Software Licensing. Easier. » - GovConnection
NVIDIA Optimus – Software Implementation - Portables4Gamers
“How software can help to manage rights”
Framework, Instruments Forms and Directory - University of Arizona
PLC Programming Software - 光洋電子工業
PoserPython™ Methods Manual - Smith Micro Software, Inc.
…“and ask 'Why not' ”? - MIT - Communications Futures Program
© 2007 MAG INSTRUMENT, INC. 2001 South Hellman Avenue ...