Views
2 years ago

Data & Telecommunications Solutions and Racks CONTEG product ...

Data & Telecommunications Solutions and Racks CONTEG product ...

PREMIUM RACK SERIESWe

PREMIUM RACK SERIESWe have embodied all the typical requests of users into the PREMIUM rack series design and created the TOP Rack Seriesamong the CONTEG rack portfolio. With PREMIUM racks the variability acquires a new dimension – only the frame remainsthe same. All other parts – 19” extrusions, top and bottom plates, front and rear doors or panels, locks, side panels, foot orplinth – can be defined by you. A wide portfolio of all the mentioned parts is ready to be applied so an individual rack, meetingthe most demanding requirements of data center and server rooms. Although the main design features remain the same, threeconfigurations according to specific user needs have been pre‐designed.PREMIUM HEAVY - RHFThe PREMIUM Heavy rack is designedto cope with the increased loads oftoday’s IT equipment within the datacenter, equipment room and network ortelecommunications closet. The RHF’s ultraPREMIUM HOUSING - RSBThe PREMIUM Housing series racks aredesigned for operation in server housingand co‐location centers where they canbe deployed as stand alone or in rows. Therack is available in a 2‐4 section design. TheUltra heavy duty design of 19” vertical extrusionresults into RHF‘s load rating 1500kgRHF’s design will perfectly fit even in a row ofcabling (RDF) or server (RSF) racksheavy duty, all welded construction and1500kg load rating mean that it’s possibleto accommodate the heaviest equipmentwithin a standard rack footprint.» PREMIUM RACK SERIES - RHF, RDF, RSF - premium qualityPREMIUM CABLING - RDFThe PREMIUM Cabling rack is designed asa dedicated cabling cabinet and is intendedto be used in data centers, equipment roomsand network or telecommunication closets.Moreover, RDF is fully compatible with allcooling units from the Targeted Coolingportfolio and is recommended to be usedtogether with top and wall mount A/C units.We have developed special cabling systemssuch as High Density Wire Managementand optical pathway system OptiWayhand‐in‐hand with this PREMIUM rack seriesconfiguration. We strongly recommend youto combine the RDF rack series with boththe mentioned cabling systems to give yourcables the best possible support and care.For more information about cabling systemsgo to page 7.PREMIUM SERVER - RSFRear pair of 19” extrusions is vertically dividedto enable variable depth settings according todifferent server depthscompartments are individually lockableand separated by perforated high‐loadshelves. Moreover, the rack can beequipped with individually adjustable 19”extrusions (must be ordered separately).All types of the 19” active or passiveequipment can be housed inside.The PREMIUM Server rack is designed asa dedicated server cabinet and is intendedto be used in data centers, equipmentrooms and network or telecommunicationclosets. The RSF’s heavy duty, all weldedconstruction and 1000kg load rating meanthat it is possible to accommodate the heavyequipment within a standard rack footprint.A full range of complementary systems,like Intelligent Power PDUs, is ready to beused together with RSF racks to make thehousing of your servers even safer and morecomfortable. Interchangeable top and bottom plates in various design options provide a uniqueinterface between in‐rack and out‐of‐rack cabling systems (illustrative image only)4

PREMIUM SERVER - RSFThe PREMIUM Server rack is designed as a pure server cabinet and is intended to be used in data centers, equipment rooms andnetwork or telecommunication closets. The PREMIUM Server’s heavy duty, all welded construction and 1000kg load rating meanthat it is possible to accommodate the heavy equipment within a standard rack footprint. The PREMIUM Server rack comeswith the full range of doors, panels and locks. Available in various heights and depths the PREMIUM Server rack is designed towork with CONTEG’s air‐flow optimization solutions and flexible cable management which means that the PREMIUM Serverrack can be tailored to suit your needs. The PREMIUM Server rack can be completed with many complementary systems (e.g.Intelligent Power PDUs – see page 9) so housing your servers can become even safer and more comfortable.PREMIUMRSF‐42‐80/80Color sampler:RAL 9005BEST RACK INCLASSRAL 7035Sizes• Height: 27, 42, 45, 48U• Width: 600, 800mm• Depth: 800, 1000, 1200mm (1200mm notavailable for 27U)Construction• Welded frame construction• 1.5 & 2.0mm sheet steelLoad rating• 1000kg balanced load (800kg for 27Uonly)19" vertical extrusions• 2 pairs of sliding 19" vertical L‐typeextrusions (600mm) or P‐type (800mm)extrusions (extends installation height ofthe rack for 12U – valid for racks 42U andhigher)• Rear pair of vertical extrusions isdivided in up to 3 parts (according torack’s height) for individual settingsaccording to server depthIP rating• Standard IP20• IP40 when solid doors or panels applied• Optionally up to IP54• A/C ready – IP54 when A/C unit installedColors• Standard RAL 7035 and 9005• Optionally other colorsFront door• Vented door – perforation rate 83%• Swivel handle lock – DIN profile, universalkey 333, multipoint; optionally half profilecylinder or combination lock single ormultipoint (other locks on request)• Door opening angle 180°• Easy re‐hanging to open on right or left• Optionally glass, steel, perforated, glasswith perforation, vertically divided doorRear door• Vented door – perforation rate 83%• Swivel handle lock – DIN profile, universalkey 333, multipoint; optionally half profilecylinder or combination lock single ormultipoint (other locks on request)• Optionally can be replaced by full rangeof front doors and panelsSide panels• Removable with locksTop plate• Single‐piece design, removable• 4" (100mm) rounded cable entry inevery corner covered by plastic cap• 300x100mm cable entries covered withremovable sheet steel blank panelsBottom plate• Segmented design, removable• 4" (100mm)rounded cable entry in everycorner covered by plastic caps• 300x100mm cable entries covered withremovable sheets steel blank panelsFeet• Adjustable feet as standard; plinth orplinth with filter optionallyAdaptation• Possibility to adapt for installation of 21"equipment (on request)• Adaptor DP‐RE‐01 needed (orderedseparately)Other• Racks can be installed in blocks by usingDP‐DR‐UNI (ordered separately)• A/C & cooling units compatible• GND/earthing kit included» PREMIUM SERVER - RSFproduct19" server racks RSF series *RSF 42U, width 800mm, depth 1200mmRSF 45U, width 800mm, depth 1200mmRSF 48U, width 800mm, depth 1200mmcodeRSF‐42‐80/120RSF‐45‐80/120RSF‐48‐80/120* for more variationand information aboutRSF racks, please visitwww.conteg.com5

Data & Telecommunications Solutions and Racks CONTEG product ...
Data & Telecommunications Solutions and Racks CONTEG product ...
conteg data sheet optimal series cable management rack
conteg data sheet optimal series cable management rack
conteg data sheet rdf series 19" cabling racks
conteg data sheet rhf series 19" high load racks
conteg data sheet rdf series 19" cabling racks
REN SERIES 19" WALL MOUNT RACKS - Conteg
RMF SERIES 19" FREE STANDING RACKS - Conteg
RMF SERIES 19" FREE STANDING RACKS - Conteg
conteg data sheet rhf series 19" high load racks
conteg data sheet ri7 series 19" free standing racks
RUD SERIES 19" WALL MOUNT RACKS - Conteg
REN SERIES 19" WALL MOUNT RACKS - Conteg
REN SERIES 19" WALL MOUNT RACKS - Conteg
RUN SERIES 19" WALL MOUNT RACKS - Conteg
RUN SERIES 19" WALL MOUNT RACKS - Conteg
RON SERIES 19" WALL MOUNT RACKS - Conteg
RM7 SERIES 19" FREE STANDING RACKS - Conteg
RON SERIES 19" WALL MOUNT RACKS - Conteg
RSH SERIES 10" SOHO RACKS - Conteg
ACP-IW SERIES 19" SOHO RACKS - Conteg
ROF SERIES 19" FREE STANDING RACKS - Conteg
RON SERIES 19" WALL MOUNT RACKS - Conteg
ROD SERIES 19" WALL MOUNT RACKS - Conteg
ROD SERIES 19" WALL MOUNT RACKS - Conteg
ACP-IW SERIES 19" SOHO RACKS - Conteg
RSH SERIES 10" SOHO RACKS - Conteg
ACP-OW SERIES 19" SOHO RACKS - Conteg
ROD SERIES 19" WALL MOUNT RACKS - Conteg