Views
3 years ago

Project Proporsal.pdf - WWU Electronic Engineering Technology

Project Proporsal.pdf - WWU Electronic Engineering Technology

This product has similar

This product has similar function as my project. Nevertheless, the Reversing Aid Sensor Systemhas two more features: LED display and external installation. LED display lets a driver knowexactly how much space he/she still has to adjust the vehicle; external installation lets a vehicleowner save the trouble of making holes on the car and keeps the original appearance of thevehicle. Tian Li Electronics Company Limited makes external parking radar also, but my projectcosts much less to make comparing with Tian Li's product. The alarm feature, which detects avehicle approaching from behind, also makes the Reversing Aid Sensor System stand out on themarket.Construction:I will borrow the 68HC12 microcontroller unit from the Electronics EngineeringTechnology Program of Western Washington University. All the other electronic parts of thesystem can be ordered on line for a reasonable price. The microcontroller, a LED display, aspeaker, and a toggle switch will be built into a device, which will be placed next to theinstrument panel on the driver side of a car. The sensors, which are connected to themicrocontroller, will be attached on the car rear lamp. When a user attaches the sensors on thevehicle, ensure that there is no obstacle within the sensing angle (90 0 ,see the diagrams below).Also, the adhesive surface should be vertical. Otherwise, improper sensing warning may begenerated. The device will be placed next to the instrumental panel on the driver side.6

Installation tipsDemonstration of Project:Demonstration will be the fun part of this project because people get to ride on a chair totest the device. People can install the Reversing Aid Sensor System by themselves to experiencethe easy and fast installation. Furthermore, I will tape the floor at every foot. People can actually“drive” the chair and compare the LED readout with the distance between the chair and anobject. Driver can experience how the system shows them exact distance between the car and anobject behind, and then avoid damaging the vehicle.7

Project Description - Electronics Engineering Technology - Western ...
Electrical/Electronic Engineering Technology
Electronics - Singapore Technologies Engineering
ELECTRICAL ENGINEERING AND ELECTRONICS
Department of Electronics Engineering Technology - Iligan Institute ...
Electronics - Singapore Technologies Engineering
Introduction to Electronic Engineering - WordPress.com - kosalmath
Projects 1 Final Presentation - Lawrence Technological University
Slides - Department of Electronic Engineering
Deep Sea Electronics - making groundbreaking technology which is ...
Electronics Engineering Technology - BCC Staff Web Server ...
AgilFence - Singapore Technologies Engineering
Risk Projection - The University of Toledo - Engineering Technology ...
Electronic Systems Laboratory - University of Engineering and ...
Department of Elec Department of Electronics Engineering
a yearly publication by the school of electrical & electronic engineering
Automotive Electronic Engineering - Intranet - University of Brighton
U-GAGE T30UX Ultrasonic Sensors Flyer - Banner Engineering
Senior Management - Singapore Technologies Engineering
Department of Electronic and Information Engineering
PDR - Aerospace Engineering Sciences Senior Design Projects
Infusing Photonics to Increase Enrollment in Electronics Engineering ...
School of Electrical & Electronic Engineering - Singapore Polytechnic
Engineering of Information Technology
Automotive electronic technology roadmaping experience ... - Nectec
Flyer - Bangladesh University of Engineering and Technology
gizmos - International Technology and Engineering Educators ...
Project description Overkapping Barendrecht - Observator Instruments
CDR - Aerospace Engineering Sciences Senior Design Projects
CV1d-06 - Department of Electronic & Computer Engineering