XT855 Operator's Manual - Ditch Witch
XT855 Operator's Manual - Ditch Witch
XT855 Operator's Manual - Ditch Witch
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>XT855</strong> Operator’s <strong>Manual</strong> Drive - 47DriveDriveGeneral OperationNOTICE: When driving unit more than a few feet (meters), pivot seat so that operator is facing toolcarrier. If operator is facing excavator, operation of track drive controls is reversed.1. Verify that excavator is in the stowed position. See “Stowing the Excavator” on page 47.2. Adjust throttle as needed.3. Ensure work mode switch is in tool carrier mode.4. Use right joystick to raise mount plate (and attachment) off ground.5. Move left joystick to forward or reverse. See “Joysticks” on page 28.Stowing the ExcavatorTo stow the excavator:1. Swivel seat to face the excavator.2. Swing excavator to your left.3. Offset boom to your right.4. Engage stow lock.CMW