MSA Fall Protection - 5 Alarm Fire and Safety Equipment

2009 Fall Protection Catalogvolume 1

Approvals and StandardsWhat is OSHA?OSHA (Occupational Safety andHealth Administration) rules andregulations are enforceable by law.Non-compliance with OSHA rulesand regulations can result in stiffpenalties and abatement periods.What is ANSI?ANSI (American NationalStandards Institute) is a voluntarystandardization system and doesnot possess the ability to enforceits standards. ANSI facilitatesdevelopment of national standardsby establishing consensus amongmanufacturers and consumers.Many of OSHA's regulations areadopted from ANSI standards.What is CSA?The Canadian Standards Association(CSA) Technical Committee Z259 setsstandards for fall protectionequipment and practices. The CSACertification and Test Division isresponsible for testing and certifyingproducts to the CSA Z259 productstandards. Other certificationorganizations, including the SafetyEquipment Institute, also certify fallprotection equipment to the CSAZ259 standards. Products that arecertified to the Z259 fall protectionstandards carry compliancemarkings of the certifying agency,for example: or CSEI. AllCanadian Provinces and Territoriesrequire that fall protection equipmentmust be certified by a recognizedthird-party organization incompliance with Canadianstandards (or meet equivalentlevels of protection approved by thelegislative authority).StandardsANSI Z359 Standard for Personal Fall ArrestThe ANSI Z359 Accredited Standards Committee completed work on a new series of fall protectionstandards that became effective on November 24, 2007. The new standards replace the previous ANSIZ359.1-1992(R1999). The new Fall Protection Code includes:• ANSI Z359.0-2007 . . . . . . . . .Definitions• ANSI Z359.1-2007 . . . . . . . . .Fall Arrest Systems, Subsystems and Components• ANSI Z359.2-2007 . . . . . . . . .Minimum Requirements for a Comprehensive, Managed Fall Protection Program• ANSI Z359.3-2007 . . . . . . . . .Work Positioning and Travel Restriction Systems, Subsystems and Components• ANSI Z359.4-2007 . . . . . . . . .Assisted-Rescue and Self-Rescue Systems, Subsystems and ComponentsANSI Z359.1-2007 includes two new requirements specific to lanyards:• Snaphook and carabiner gate strength will increase to 3,600 pounds• Twin-leg fall arrest lanyards will be tested to 5,000 pounds at the junction point where the lanyard legscome together.CSA Z259 Fall Protection StandardsZ259.10-06 Full Body Harnesses• Revisions became effective in June, 2007• All CSA compliant harnesses will now have acapacity up to 175 kg (386 lb)• Harnesses will be equipped with a built-in fallarrest indicator• New labeling has been added which replacesthe “A” indicator marking• New requirements have been included forintegral connection to other components of afall protection system• The previous classifications system (Classes A,D, E, L and P) remains the sameZ259.11-05 Lanyards and Energy Absorbers• Revisions became effective in September, 2007• Energy absorbers and lanyards have been placed in onestandard• A heavyweight classification of energy absorbers,Class E6, has been added for workers with an all-up weightof 90 kg (200 lb) to 175 kg (386 lb). Class E4 energyabsorbers are intended for general use by workers whoseweight lies between 45 kg (100 lb) and 115 kg (254 lb)• Positioning and fall arrest lanyards have been placed in onestandard• Final strength and elevated temperature test requirementsfor energy absorbers have been revised to better reflectoperating conditionsGENERAL FALL ARREST REQUIREMENTSOSHA 29 CFR 1926.502 requires (but is not limited to):• Body belts are not acceptable as part of a personal fall arrest system• Only locking type snaphooks shall be used• Anchorages used for attachment of personal fall arrest systems must be capable of supporting at least 5,000 lbsper employee attached• Personal Fall Arrest systems shall be rigged such that an employee can neither free fall more than 6' nor contactany lower level2Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Table of ContentsApprovals & Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2MSA Promise/Attachment Points/Harness Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Harnesses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–19Shock-Absorbing Lanyards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21–26Restraint Lanyards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27–28Anchorage Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29–31Fall Protection Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32–35Rope Grabs and Vertical Lifelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Self-Retracting Lanyards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37–39Confined Space Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40–41Ladder Climbing Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Horizontal Lifelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44–46Rescue Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47–53General Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53Custom Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54–55“Calculating Total Fall Distance” Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56Safety At Heights Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58–59Need it NOW ? Call MSA!Need itNOW! is a new delivery program from MSA that’s designed to get you the products you need, when you need them — NOW!Two tiers of priority shipping are offered under the Need itNOW! delivery program:•Tier I includes MSA’s most popular products. Tier I delivery offers same day or next-day shipping, with over 100 product choices!•Tier II delivery offers shipping within 5 days, with over 400 product choices!Products included in this program are identified by the following symbols:•Symbols with a 1 denote Tier I product status•Symbols with a 2 denote Tier II product status1212•Black symbols denote that the maximum order quantity for priority shipping is 100 units•Red symbols denote that the maximum order quantity for priority shipping is 50 units1 21 2Visit our website at www.msanet.com for a complete list of Need itNOW! productsand to view complete program terms and conditions.Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-90103

TechnaCurv ® Full Body HarnessThe TechnaCurv Full Body Harness was designed with your comfort in mind. Features include:• Curvilinear Comfort System• Visco-elastic shoulder padding• Innovative web design• 400 pound capacity• Secure-Fit buckles• Sorbtek fabric on shoulder and sub-pelvic padsHarnesses• Integral load indicator• Meets ANSI Z359.1-2007, ANSI A10.32,all applicable OSHA regulations,and is CSA certified to Z259.10-06In addition to the features above, the TechnaCurv harness is designed with downward adjusting torso straps on most models to ease adjustment.This is also the first harness on the market that allows you to order exactly the options you want, and only the options you want, through ourAssemble-to-Order process. All these features combine to provide you with the most comfortable, versatile, unique, and safe harness available today.theCUR VI LIN EAR COMFORT SYSTEMfeatures:Curvilinear Torso Webbing• This patent-pending process curves thewebbing around the neck area to helpprevent chafing and discomfort on the neckthat can be caused by some standardharnesses.COMBINED WITHAdjustable Y Back D-Locator Pad• Allows complete adjustment of the backD-ring to provide proper harness fit.• Assists in moving the shoulder webbing awayform the neck, providing additional comfort tothe user.• Ribbed web slots in back pad allow for easyback D Ring adjustment.• A special polymer blend allows for optimalstrength and minimal weight, giving you alighter, more durable harness.Us er’sNeckTechnaCurv HarnessPart No. 10053000Webbing• Soft, flexible webbing allows the harness to move with you as youwork for increased comfort.• An innovative pattern design offers a cool, sporty appearance.TO PROVIDE YOUWITH TOTAL COMFORT!Se cure-Fit Buckle• De signed to ease don ning, doffing, and adjustment.Pos i tive• Sin gle hand op er a tion.Engagement• Buck le release tabs move in oppositeWindowdirections and are recessed inside theouter buckle dimensions to pre vent accidental disengagement.• Pos i tive en gage ment windows allow you to see that the buckleis properly en gaged. No need to try and listen for a "click" on anoisy job site.Shoulder Pads & Sub-pelvic PadSorbtek Fabric:• A highly breathable, lightweight materialdesigned to wick moisture away fromthe body.Visco-Elastic Shoulder Padding:• Developed by NASA, Visco-elastic paddingis more comfortable than tra di tion al foampadding.• Memory foam will not break down over time,offering superior comfort throughout the lifeof the harness.• Automatically adjusts to every curve ofyour body.Shoulder PadOther Buckle TypesQwik-Fit (Mating) BuckleTongue BuckleVari able Width Webbing• Width varies from 1-5/8” to 2-5/8”.• Distributes weight over a wider surface area to increase comfortduring suspension/work positioning.Ordering information begins on next page.Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-90105

HarnessesTechnaCurv Full Body HarnessTechnaCurv HarnessPart No. 10041518TechnaCurv HarnessPart No. 10041599SIZE STYLE PADDING CHEST BUCKLE LEG BUCKLES D-RINGSPart No. XSM STD XLG SXL Vestype Pullover Shoulder Sub-Pelvic Qwik-Fit Secure-Fit Secure-Fit Tongue Qwik-Fit Back Chest Hip2 10041517 X X X X 1 0 010041518 X X X 1 0 010041519 X X X X 1 0 010041590 X X X 1 0 01 10041591 X X X X 1 0 01 10041592 X X X X 1 0 010041593 X X X 1 0 010041594 X X X 1 0 01 10041595 X X X X 1 0 210041596 X X X X 1 0 210041597 X X X 1 0 210041598 X X X 1 0 21 10041599 X X X X X 1 0 010041600 X X X X X 1 0 010041601 X X X X 1 0 010041602 X X X X 1 0 01 10041603 X X X X X 1 0 210041604 X X X X X 1 0 210041605 X X X X 1 0 210041606 X X X X 1 0 21 10041607 X X X X 1 1 210041608 X X X X 1 1 210041609 X X X 1 1 210041610 X X X 1 1 22 10041611 X X X X X 1 1 210041612 X X X X X 1 1 210041613 X X X X 1 1 210041614 X X X X 1 1 22 10041615 X X X X X X 1 1 210041616 X X X X X X 1 1 210041617 X X X X X 1 1 210041618 X X X X X 1 1 210043354 X X X X X X 1 1 210043355 X X X X X X 1 1 210043691 X X X X X 1 0 210043692 X X X X X 1 0 210072081 X X X X 1 0 010072082 X X X X 1 0 010072083 X X X X 1 0 010073051 X X X X X X 1 0 210073052 X X X X X X 1 0 26Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

HarnessesTechnaCurv Construction HarnessesTechnaCurv Construction Harnesses offer all of the exciting features of the TechnaCurv Harnesswith the added flexibility of incorporating a tool belt. There are two construction harnessesto choose from:• With integral belt that includes a dual-durometer back pad for superior comfort• With Belt Loops for total flexibility of adding any belt of your choice• Optional bright green (Hi-Viz) webbing for greater visibilityNote: Webbing does not meet the requirements for high-visibility clothing as defined in OSHA and ANSI.TechnaCurvConstructionHarnesswith BeltPart No.10054403122Part No.SIZE WEBBING CHEST BUCKLE LEG BUCKLES BELT LOOPS D-RINGSXSM STD XLG SXLGreen/BlackRed/BlackSecure-FitQwik-FitSecure-FitTongueQwik-Fitw/o Beltw/integralBelt10053001 X X X X X 1 010053002 X X X X X 1 010053003 X X X X X 1 010053004 X X X X X 1 010053005 X X X X X 1 010053006 X X X X X 1 210053007 X X X X X 1 210053008 X X X X X 1 210053009 X X X X X 1 210053010 X X X X X 1 210054402 X X X X X 1 210054403 X X X X X 1 210054719 X X X X X X 1 210063653 X X X X X 1 210063654 X X X X X 1 210063656 X X X X X 1 210063657 X X X X X 1 210062471 X X X X X 1 210054720 X X X X X 1 210057538 X X X X X 1 210054719 X X X X X 1 210062921 X X X X X 1 210054762 X X X X X 1 210054761 X X X X X 1 2TechnaCurv Tower HarnessesIn addition to the features of the standard TechnaCurv Harness, the Tower Harness modelincorporates an integral body belt and removable saddle. The body belt and saddle areconstructed using a dual-durometer pad and Sorbtek fabric for ultimate comfort duringprolonged work positioning/suspension activities. The body belt and saddle both includetwo side D-rings and the saddle height is adjustable. Models also include back and frontD-rings. Additional options are available as outlined in the chart below.BackHipTechnaCurv Hi-VizConstructionHarnessPart No. 100636541SIZE STYLE PADDING LEG BUCKLESPart No. STD XLG Vestype Pullover Shoulder Sub-Pelvic Secure-Fit Tongue Qwik-Fit10048342 X X X X X10048344 X X X X X10048346 X X X X10048348 X X X X10048350 X X X10048342 X X X10048343 X X X X X10048345 X X X X X10048347 X X X X10048349 X X X X10048351 X X X10048352 X X XTechnaCurvTower HarnessPart No. 10048342Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-90107

HarnessesTechnaCurv Picker’s HarnessAvailable with all the exciting features of the TechnaCurv Harness, plus:• 18” Integral Dorsal D-Extension with velcro closure provides easyaccess to the Back D-ring• Dorsal D-Extension available as option 3 under the Dorsal D-option ofthe Assemble-to-Order MatrixPart No.ANGHN151221331002DescriptionTechnaCurv Picker’s HarnessTechnaCurv Picker’s HarnessPart No. ANGHN151221331002TechnaCurv Full Body Harness Assemble-To-Order MatrixApprovalNCAccessoriesNon-CSACSA135246Style ofHarnessVestStyleTower(VestStyle)Tower(VestStylelessSaddle)PulloverStyleTower(PulloverStyle)Tower(PulloverStylelessSaddle)D-RingConfiguration1 Back2 Back, Chest3 Back, Chest,Hips478478Back, Chest,Hips,Shoulders5 Back, Hips6 Back, Chest,ShouldersBack,ShouldersBack, Hips,Shoulders1 Back2 Back, Chest3 Back, Chest,HipsBack, Chest,Hips,Shoulders5 Back, Hips6 Back, Chest,ShouldersBack,ShouldersBack, Hips,ShouldersVersionSizeLegBucklesD-RingType1 Red/ 1 XSM 1 Secure- 1 Steel 0Black2 STDFitWebbing3 XLG2 Tongue2 Green/BuckleBlack 4 SXL3 Qwik-FitWebbingChest Strap(Vest Styleonly)None1 Secure-Fit2 TongueBuckle3 Qwik-Fit23Dorsal DOptions0 None1IntegralDyna-BrakeShockAbsorberIntegralSure-stopShockAbsorber18'' IntegralDorsal DExtension(Non-ShockAbsorbing)Padding& SubpelvicTool Belt0123NoneShoulderSubpelvicShoulder012NoneSupportStraps OnlyOccidentalLeatherwithSupportStraps233 OccidentalLeather/Nylon withSupportStraps4 ModularBelt withSupportStraps5 TradesmanBelt6 Belt Loops7 OccidentalLeatherwithBelt Loops8 OccidentalLeather/Nylon withBelt Loops9 ModularBelt withBelt Loops10 TradesmanBelt withBelt Loops0 None1MedicalID KitMedicalID Kit &SafetyStepSafetyStepLanyardClip0 None12With 1AttachmentWith 2AttachmentsA-NGH 1 1Part Number• ATO orders ready to ship 5 days after receipt of order.• Harnesses ordered using the ATO System are non-returnable.• If a Vest Style Harness with a Chest D-ring is selected,the Secure-Fit Buckle is not available as an option for the Chest Strap.• All Tower Style Harnesses include a Chest D-ring.Quantity• If the CSA approval option is selected, the Dyna-Brake option is not available as an integral shock absorber.• Tower Harness Styles include back pad, tool belt and saddle. (Tool Belt options listed in ATO are not availableon Tower Harness.)• Only D-ring Configuration Options 3 and 4 are available on the Tower Harness Style.• TechnaCurv Construction Harness is not available on ATO.8Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

HarnessesWorkman ® HarnessesWorkman HarnessThe Workman Harness providescomfortable protection, due to itslightweight components anddurable webbing. The vest-styleharness, with optional hip D-Ringsfor work positioning, fits a widerange of body types and sizes.Color-contrasting thigh and torsostraps simplify donning.• Optimum quality at aneconomical price• Comfortable• Yellow polyester webbingfor increased visibility• Web retainer collars tokeep excess webbing neat• 400 pound capacity• Integral load indicator• Choice of Qwik-Fit orTongue-Buckle leg strapsfor easy adjustment• Instructions in English,Spanish, and French• Meets OSHA regulations,ANSI A10.32 &ANSI Z359.1-2007, and iscertified to CSA Z259.10-06Workman Construction HarnessThe Workman Construction Harness alsooffers shoulder pads and an integral backpadfor added comfort during work positioning anda removable, tongue-buckle tool belt. Meetsapplicable OSHA regulations, ANSI A10.32,ANSI Z359.1-2007, and is certified to CSAZ259.10-06.Workman HarnessPart No. 10072479Workman HarnessPart No. 10072491WorkmanConstructionHarnessPart No. 10077571Part No.SIZECHESTSTRAPLEG BUCKLESATTACHMENTPOINTSXSM STD XLG SXL Qwik-Fit Tongue Qwik-Fit Back HipINTEGRALBACK PAD& TOOL BELTSHOULDERPADS1111110072478 X X X X10072479 X X X X10072480 X X X X10072481 X X X X10072482 X X X X X11111110072483 X X X X X10072484 X X X X X10072485 X X X X X10072486 X X X X10072487 X X X X10072488 X X X XWorkman Harness111111111111110072489 X X X X10072490 X X X X X10072491 X X X X X10072492 X X X X X10072493 X X X X X10072494 X X X X X X10072495 X X X X X X10072496 X X X X X X10072497 X X X X X X10077490 X X X X X X X10077571 X X X X X X X10077572 X X X X X X X10077573 X X X X X X XWorkman Construction HarnessCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-90109

HarnessesFP Pro ® HarnessThe harness is available in cross-chest and vest styles, with optional hip D-rings for work positioning,and fits a wide range of body types and sizes. Color-con trast ing thigh and torso straps simplify donning.Features• Bright red polyester webbing for high visibility• Meets all applicable OSHA standards, ANSI A10.32, and ANSI Z359.1-2007• Lightweight design for increased comfort12111211121SIZE STYLE LEG BUCKLES INTEGRAL BELT & D-RINGSPart No. STD XLG Cross-Chest Vest-Style Tongue Qwik-Fit BACK PAD Back Hip415842 X X X 1 0415844 X X X 1 0415944 X X X 1 2415946 X X X 1 2415947 X X X 1 0415949 X X X 1 0415950 X X X 1 2415952 X X X 1 210033830 X X X 1 010033831 X X X 1 010033833 X X X 1 210033834 X X X 1 210033836 X X X 1 010033837 X X X 1 010033839 X X X 1 210033840 X X X 1 210043033 X X X X 1 210057087 X X X X 1 2Other sizes and configurations are available.FP Pro HarnessCross-Chest StylePart No. 415842FP Pro Vest-StyleConstruction Harnesswith Integral Back Pad& BeltPart No. 10043033Gravity HarnessesGravity Harnesses are available in vest and cross-over styles. Gravity Harnesses are suitable forcontrolled descent, positioning, ladder climbing, rescue, and fall arrest. A variety of options are availableto meet your specific needs. All Gravity Harnesses now include a load-indicator to alert you when theharness has been involved in a fall event. All gravity harnesses meet applicable OSHA regulations,ANSI A10.32, ANSI Z359.1-2007, and are CSA certified to Z259.10-06.400 poundcapacityFor Gravity Harnesses with a belt, belt sizing is as follows:XSM SML MED LGE XLG28''– 36'' 32''– 40'' 36''– 44'' 40''– 48'' 44''– 52''Harness Classes as defined in CSA Z259.10-06:Class A: Fall ArrestClass D: Suspension & Controlled DescentClass L: Ladder ClimbingClass P: Work PositioningClass E: Evacuation10Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Gravity HarnessesSSH304 Series – Class AThe SSH304 series of Gravity Harnesses are a vest-style design andinclude a back D-ring and an integral load detector. Additional optionsare available as outlined in the chart on the next page.HarnessesGravity HarnessPart No. SSH3042000011Class ASIZE WEBBING LEG CONNECTION IntegralShock-KevlarBlackAbsorberXSM STD XLG NylonPolyesterOrangeReflectiveYellowReflective Red/Blue Blue/GrayRed/BlackTongueBuckleSSH30420000 X X X XSSH30420001 X X X XSSH30420005 X X X XSSH30420020 X X X XSSH30420028 X X X XSSH30420050 X X X XSSH30420055 X X X XSSH30420060 X X X XSSH30420061 X X X XSSH30420064 X X X XSSH30420066 X X X XSSH30420070 X X X XMatingBuckleSSH30420300 X X X X XSSH30420305 X X X X XSSH30420350 X X X X XSSH30420351 X X X X XSSH30420355 X X X X XSSH30420360 X X X X XSSH30420361 X X X X XSSH30420366 X X X X XSSH30425000 X X X XSSH30425050 X X X XSSH30425060 X X X XSSH30425300 X X X X XSSH30425350 X X X X XSSH30430004 X X X XSSH30430054 X X X XSSH30430064 X X X XSSH30430074 X X X XSSH30430304 X X X X XSSH30430364 X X X X XSSH30435064 X X X XSSH30435074 X X X XSSH30435364 X X X X XSSH30440061 X X X XSSH30440361 X X X X XSSH30440371 X X X X XCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901011

HarnessesGravity HarnessesSSH306 Series – Class A, EThe SSH306 series of Gravity Harnesses are a vest-style design and include back andshoulder D-rings as well as mating leg buckles. Harnesses also include an integral loadindicator. Additional options are available as outlined in the chart below.Class A, ESIZE WEBBING IntegralShock-STD XLG Nylon Polyester Red/Blue Red/Black AbsorberSSH30620000 X X XSSH30620050 X X XSSH30620060 X X XSSH30620300 X X X XSSH30625000 X X XSSH30625300 X X X XSSH30630064 X X XGravity HarnessPart No. SSH30620000SSH314 Series – Class A, L, PThe SSH314 series of Gravity Harnesses are a vest-style design and include back, front,and hip D-rings. This model is offered in a universal size. Harnesses also include anintegral load indicator. Additional options are available as outlined in the chart below.Class A, L, PNylonWEBBING LEG CONNECTION BELTPolyesterTongueBuckleMatingBuckleSSH31420B X X XSSH31420C X X XSM MED LG XLGSSH31420D X X XSSH31420D22 X X XSSH31420E X X XSSH31425C X X XSSH31425D22 X X XSSH31430D22 X X XSSH31435D22 X X XGravity HarnessPart No. SSH31420CSSH315 Series, Derrick Harness – Class A, D, PThe SSH315 series of Gravity Harnesses are a vest-style design and include back and hipD-rings. This model is offered in a universal size, with tongue buckle leg straps and anintegral shock absorber. Harnesses also include an integral load indicator. Additionaloptions are available as outlined in the chart below.Class A, D, PWEBBINGBELTBlack Red/Black SM MED LG XLG SXLSSH31535B364 X XSSH31535C364 X XSSH31535D361 X XSSH31535D364 X XSSH31535E364 X XSSH31535F364 X XGravity HarnessPart No. SSH31535C36412Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Gravity HarnessesSSH609 Series, Rigger/Rescue Harness – Class A, L, D, P, EThe SSH609 series of Gravity Harnesses are a cross-over style design and include back, front, and hipD-rings. This model is offered in black, polyester webbing and mating leg buckles. Harnesses alsoinclude an integral load indicator. Additional options are available as outlined in the chart below.HarnessesGravity HarnessPart No. SSH60930001Class A, L, D, P , ESTDSIZEXLGIntegral SA2SSH60930001XSSH60930051XSSH60930301 X XGravity HarnessPart No. SSH70920000SSH709 Series – Class AThe SSH709 series of Gravity Harnesses are a cross-over style design andinclude a back D-ring and integral load indicator. Additional options areavailable as outlined in the chart below.Class ASIZE WEBBING LEG CONNECTION IntegralShock-KevlarAbsorberXSM STD XLG SXL NylonPolyesterOrangeReflectiveYellowReflective Red/Blue Black Red/BlackTongueBuckleSSH70920000 X X X XSSH70920001 X X X XSSH70920006 X X X XSSH70920008 X X X XSSH70920050 X X X XSSH70920056 X X X XMatingBuckleSSH70920300 X X X X XSSH70920301 X X X X XSSH70920306 X X X X XSSH70920308 X X X X XSSH70920350 X X X X XSSH70920356 X X X X XSSH70920358 X X X X XSSH70925000 X X X XSSH70935004 X X X XSSH70940001 X X X XSSH70940301 X X X X10067455 X X X X10067456 X X X X10067512 X X X XCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901013

HarnessesGravity HarnessesSSH807 Series – Class A, PThe SSH807 series of Gravity Harnesses are a vest-style design and include back and hipD-rings. This model is offered in a universal size with mating leg buckles and an integralload indicator. Additional options are available as outlined in the chart below.SSH80720BSSH80720CSSH80720DClass A, PSIZESM MED LGXXXGravity HarnessPart No. SSH80720CGravity HarnessPart No. SSH80920000SSH809 Series – Class A, L, D, P, EThe SSH809 series of Gravity Harnesses are a cross-over style design andinclude back, front, and hip D-rings. Harnesses also include an integral loadindicator. Additional options are available as outlined in the chart below.1ClassA, L, D, P, ESIZE WEBBING LEG CONNECTION IntegralPolyesterReflective Reflective Red/Blue Blue/Gray Black Red/ Tongue MatingOrange YellowShock-XSM STD XLG NylonKevlarBlack Buckle Buckle AbsorberSSH80920020 X X X XSSH80920021 X X X XSSH80925001 X X X XSSH80920000 X X X XSSH80920001 X X X XSSH80920006 X X X XSSH80920300 X X X X XSSH80920301 X X X X XSSH80920305 X X X X XSSH80920306 X X X X XSSH80925301 X X X X XSSH80930004 X X X XSSH80935004 X X X XSSH80940301 X X X X XSSH80920308 X X X X XSSH80940001 X X X XSSH80920050 X X X XSSH80920051 X X X XSSH80920350 X X X X XSSH80920351 X X X X XSSH80925351 X X X X XSSH80940351 X X X X XSSH80925050 X X X XSSH80920056 X X X XSSH80920356 X X X X XSSH80925321 X X X X XSSH80920008 X X X XSSH80940051 X X X XSSH80925000 X X X X14Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

HarnessesGravity HarnessesSSH909 Series – Class A, L, D, EThe SSH909 series of Gravity Harnesses are across-over style design and include back andfront D-rings and an integral load indicator.Additional options are available as outlinedin the chart below.Gravity HarnessPart No. SSH90920000Class A, L, D , ESIZE WEBBING LEG CONNECTIONSTD XLG Nylon Polyester KevlarOrangeReflectiveYellowReflective Red/Blue Blue/Gray Black Red/BlackTongueBuckleMatingBuckleIntegralShock-AbsorberSSH90920306 X X X X XSSH90920308 X X X X XSSH90920000 X X X XSSH90920001 X X X XSSH90920300 X X X X XSSH90920301 X X X X XSSH90925000 X X X XSSH90925001 X X X XSSH90925300 X X X X XSSH90930004 X X X XSSH90935004 X X X XSSH90940001 X X X XSSH90920006 X X X XSSH90920355 X X X X XSSH90920050 X X X XSSH90920350 X X X X XSSH90920356 X X X X XSSH90920305 X X X X XSSH915 Series, Derrick Harness – Class A, L, D, EThe SSH915 series of Gravity Harnesses are a cross-over style design and include a back, front, andside D-rings. This model is offered in a universal size with a 3” wide web saddle and tongue buckle legstraps. Harnesses also include an integral load indicator. Additional options are available as outlined inthe chart to the right.Class A, L, D , EIntegralShock-AbsorberBELTSM MED LG XLG SXLGravity HarnessPart No. SSH91535C304SSH91535B304 X XSSH91535C304 X XSSH91535D304 X XSSH91535E304 X XSSH91535F304 X XSSH91535B004SSH91535C004SSH91535D004SSH91535E004SSH91535F004XXXXXCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901015

HarnessesGravity HarnessesSSH916 Series, Derrick Harness – Class A, L, D, P, EThe SSH916 series of Gravity Harnesses are a cross-over style design and include a back, front,and side D-rings. This model is offered in a universal size with a 3” wide web saddle, tongue buckleleg straps, and an additional D-ring attached to the back of the integral, padded belt. Harnessesalso include an integral load indicator. Belt size options are available as outlined in the chart below.Gravity HarnessPart No. SSH91635C3048Class A, L, D, P, EBELTSM MED LG XLG SXLSSH91635B30438SSH91635C30438SSH91635D30438SSH91635E30438SSH91635F30438XXXXXGravity HarnessPart No. SSH91725C001SSH917 Series, Tower Harness – Class A, L, D, P, EThe SSH917 series of Gravity Harnesses are a cross-over style design and include back, front, and hip D-rings.This model is offered in a universal size with a web saddle and tongue buckle leg straps. Harnesses also includean integral load indicator. Additional options are available as outlined in the chart below.LEG CONNECTIONBELTClass A, L, D, P, ECrankedTongue Buckle Mating Buckle Integral SAD-RingXSM SM MED LG XLGSSH91725A001 X XSSH91725D001 X XSSH91725C001 X XSSH91725B001 X XSSH91725E001 X XSSH91725B301 X X XSSH91720C301 X X XSSH91725C301 X X XSSH91725D301 X X XSSH91725E301 X X XSSH91720CD21608* X X X XSSH91720CD23308* X X X XSSH91720CD25308* X X X XSSH91720CD25608* X X X X* Orange webbing16Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

ArcSafe ® HarnessesThe ArcSafe harness is SEI-certified to the requirements of the ASTM F887-05standard for arc flash protection up to 40 cal/cm 2 and is designed to meet the needsof utility and maintenance workers.Additional features• Nylon web loop attachmentpoints• Meets all applicable OSHAregulations and ANSI Z359.1-2007 & A10.32 standards• Certified toCSA Z259.10-06• Integral load indicator• 400 pound capacity• Y-shaped back web loop locatorpad provides comfort by movingthe webbing away from thewearer's neck• Color-coded leg and torso strapsto simplify donning• Downward-adjusting torsostraps to ease adjustmentFront attachment loopscan be tucked awaywhen not in useVest-StyleArcSafe HarnessPart No. 10070439HarnessesCross-ChestArcSafe HarnessPart No. 10070463ArcSafe Vest-Style Harnesses (for Cross-Chest Style see next page)All vest-style ArcSafe Harnesses include protective covers over chest strap and torso adjustment hardware.SIZE LEG BUCKLES ATTACHMENT POINTS Integral ShockBelt LoopsXSM STD XLG SXL Qwik-Fit Tongue Hip Back Front Absorber10070422 X X X X X10070423 X X X X X10070424 X X X X X10070425 X X X X X10070426 X X X10070427 X X X10070428 X X X10070429 X X X10070430 X X X10070431 X X X10070432 X X X10070433 X X X10070434 X X X X10070435 X X X X10070436 X X X X10070437 X X X X10070438 X X X X X10070439 X X X X X10070440 X X X X X10070441 X X X X X10070442 X X X X10070443 X X X X10070444 X X X X10070445 X X X X10070446 X X X X X X10070447 X X X X X X10070448 X X X X X X10070449 X X X X X X10070450 X X X X X10070451 X X X X X10070452 X X X X X10070453 X X X X XCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901017

HarnessesArcSafe Cross-Chest Harnesses(for Vest-Style see previous page)2122SIZE LEG BUCKLES ATTACHMENT POINTS IntegralShockXSM STD XLG SXL Qwik-Fit Tongue Hip Back Front Absorber10070458 X X X X X10070459 X X X X X10070460 X X X X X10070461 X X X X X10070462 X X X X X10070463 X X X X X10070464 X X X X X10070465 X X X X X10070466 X X X X X10070467 X X X X X10070468 X X X X X10070469 X X X X X10070470 X X X X X10070471 X X X X X10070472 X X X X X10070473 X X X X X10070474 X X X10070475 X X X10070476 X X X10070477 X X X10070478 X X X X X10070479 X X X X X10070480 X X X X X10070481 X X X X X10060113 X X X X X10060114 X X X X X10060115 X X X X X10060116 X X X X X10060108 X X X X10060110 X X X X10060111 X X X X10060112 X X X X10060104 X X X X10060105 X X X X10060106 X X X X10060107 X X X X10060100 X X X10060101 X X X10060102 X X X10060103 X X X10074529 X X X X10074530 X X X X10074561 X X X X10074562 X X X X10074563 X X X X X10074564 X X X X X10074565 X X X X X10074566 X X X X X10077853 X X X X X10077855 X X X X XBeltLoopsHardwareCovers18Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Thermatek ® HarnessesThermatek Harnesses are vest-style harnesses designed for high-heat applications suchas welding. All Thermatek Harnesses are made using Kevlar/Nomex webbing, use matingbuckles on the leg and chest straps, and include back and hip D-rings. Meets applicableOSHA standards, ANSI 10.32, ANSI Z359.1-2007, and is ceritfied to CSA Z259.10-06.HarnessesThermatek HarnessPart No. 100200622Part No.SIZELEGBUCKLESATTACHMENTPOINTSXSM STD XLG SXL Qwik-Fit Back Hip10020067 X X 1 210020062 X X 1 210020066 X X 1 210020065 X X 1 2Harness AccessoriesMiscellaneous Harness AccessoriesA Back pad (P/N 507144) snaps into the hip D-rings of Pullover and VestypeHarnesses and adds ad di tion al lower lumbar support while work po si tion ing.Shoulder pad (P/N 10028444) may be snapped around the shoulder straps andunder the back D-ring pad of the harness to add comfort.Lanyard Connector AdapterPart No. 505318Shoulder PadPart No. 10028444Shoulder PadsPart No. 10077489122Part No.Description505318 Lanyard Connector Adapter, nylon, 1 D-ring, 18” (Back D-Ring Extension)507144 Economic Back Support Pad, nylon10028444 Shoulder Pad10043147 Double D-Ring Extension, 1" nylon web, sewn loop10071688 Single D-Ring Extension, 1" nylon web, sewn loop10077489 Shoulder Pads, 1 setDouble D-ring ExtensionPart No. 10043147Suspension Trauma Safety StepThe Suspension Trauma Safety Step is designed to help workers in a post-fallsuspension position avoid the effects of suspension trauma. The Safety Stepallows workers to relieve pressure by inserting a foot into one of the step loopsand then standing up in the harness. The flexing of leg muscles and release ofharness leg strap pressure stimulates blood flow, helping to prevent the onset ofsuspension trauma. Workers can use a single Safety Step or two Safety Steps(one for each leg) to provide additional support, balance, and comfort.11Part No.Description10063431 Suspension Trauma Safety Step with carabiner10063441 Suspension Trauma Safety Step without carabinerCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901019

Shock-Absorbing LanyardsEnergy absorbing lanyards are a component of a personal fall arrest system. They provide a means of connection between the back (dorsal) D-ringof MSA full body harnesses and a qualified anchorage and anchorage connector. The energy absorber keeps fall arrest forces below ANSI andOSHA limits and de cel er a tion distance is con trolled to a maximum of 42 inches. The lanyard is available in web, rope, and wire rope configurationswith a variety of snaphooks.Workman ® Energy-Absorbing LanyardsWorkman Energy-Absorbing LanyardPart No. 10072472Workman Energy-Absorbing LanyardPart No. 10072474Workman Energy-Absorbing LanyardPart No. 10076124Workman Energy-Absorbing LanyardPart No. 10072473Workman Energy-Absorbing LanyardPart No. 10073708Workman Energy-Absorbing LanyardPart No. 10072475Workman energy-absorbing lanyards arelightweight with a low-profile body. The shockabsorber includes a clear, durable protectivecover over the labels to increase service lifeand allow for easy inspection.Features• Tear-tape design to keep fall arrest forces below 900 lbf.• Choice of single or twin-leg configurations• Choice of adjustable or tie-back configurations• Meets ANSI A10.32, applicable OSHA regulations, and is certified to CSA Z259.11-05 E4Workman Energy-Absorbing Lanyards111111Part No. Harness Connection Anchorage Connection Twin Single Tie-Back10072472 LC LC X X10072473 LC (2) LC X X10072474 LC LC X10073708 LC (2) LC X10072475 LC (2) GL3100 X10076124 LC GL3100 XArcSafe ® LanyardsArcSafe Lanyards are SEI-certified to the requirements of ASTM F887-05 standard for electrical arc flashprotection. ArcSafe Shock-Absorbing Lanyards utilize a tear-tape design to keep fall arrest forces below900 pounds. Meets applicable OSHA requirements, ANSI A10.32, ANSI Z359.1-2007, and is certified to CSAZ259.11-05 E4. Heavy Worker Lanyards are compliant to OSHA regulations only.ArcSafe LanyardPart No. 1006013911ArcSafe LanyardsPart No. Harness Connection Anchorage Connection Twin Single Heavy Worker10060139 36C 36C X10060140 36C 36C X10088256 36C 36CL X10088255 36C 36C X X10088257 36C 36C X X10088253 36C 36CL X XArcSafe LanyardPart No. 1006014020Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

FP5K Tie-Back Shock-Absorbing LanyardShock-Absorbing LanyardsPart No. 10047084Part No. 10056762Part No. 10047086Part No. 10047085Part No. 10056763Part No. 10047087• Uses the FP5K Carabiner, a Tie-back lanyardconnector with a 5000-pound gate strength inany direction and a 1” Gate Opening• Available in web or cable versionFP5K Tie-Back Shock-Absorbing Lanyards• Web version utilizes Monster-Edge Webbingwith 12,000-pound minimum breaking strengthand increased abrasion resistance• Utilizes the Sure-Stop Shock Absorber to keepfall arrest forces below 900 lbf• Avail able in both single and twin-legconfigurations• Meets OSHA regulations, ANSI 10.32 and iscertified to CSA Z259.11-05 E4. Shock-absorbingversions meet ANSI Z359.1-2007. HeavyWorker Lanyards are compliant to OSHAregulations only.1122Part No. Shock-Absorber Hardware Length Type Heavy Worker10047084 Sure-Stop 36C/FP5K 6' Adjustable, Web10047085 Sure-Stop36C in center(attaches to back D-Ring)/ FP5K each leg6' Twin Leg, Adjustable, Web10047086 Sure-Stop 36C/FP5K 6' Fixed, Cable10047087 Sure-Stop36C in center(attaches to back D-Ring)/ FP5K each leg6' Twin Leg, Fixed, Cable10056762 LS/FP5K 5' Adjustable, Web10056763LS in center(attaches to back D-Ring)/ FP5K each leg5' Twin Leg, Adjustable, Web10088073 Sure-Stop 36C/FP5K 6' Adjustable, Web X10088074 Sure-Stop 36C in center/FP5K each leg 6' Twin Leg, Adjustable, Web X10088075 Sure-Stop 36C/FP5K 6' Fixed, Cable X10088076 Sure-Stop 36C in center/FP5K each leg 6' Twin Leg, Fixed, Cable XFP5K CarabinerThe outer side of the gate has a knurled surface to provide a secure grip on the gatewhen opening. The inner side of the gate has flattened edges to keep lanyard/gatecontact at a minimum.Sec tion ofMonster Edge Web bingSpe cial ly designedsafety re cess inside thebody of the carabinerprovides a place for thelanyard to rest whentied back.Internal wear in di ca torCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901021

Shock-Absorbing LanyardsDiamond Shock-Absorbing Lanyards and ExpanyardsThe Diamond Shock-Absorbing Lanyard raises the standard for shock-absorbinglanyards with these exciting features:• Teflon-coated, durable polyester sheath for increased abrasion and UV resistance• Keeps fall arrest forces below 900 lbf• Available in a single or twin-leg configuration• Highly visible deployment tag• Comfortable, lightweight pouchless designTeflon ® fabric protector provideswater, stain, and mildew re sis tanceIn addition to the exciting features of the Diamond Lanyard, the Diamond Expanyard features:• Elastic design reduces trip hazards and snag hazards• 6’ Diamond Expanyard contracts to 4.5’For workers who need 100% continuous connection and are required to transition from ashock-absorbing lanyard to a self-retracting lanyard, the Diamond Lanyard with integral D-ringextension offers the versatility you need.All Diamond Lanyards and Expanyards meet applicable OSHA regulations and ANSI A10.32.Compliance with ANSI Z359.1-2007 and certification to CSA Z259.11-05 E4 are noted in thepart number table.Part No. 10023932Lightweight,streamlined designStrong & durable polyester sheath forincreased abrasion and UV resistancePart No. 10045936Diamond Shock-Absorbing Lanyards and Expanyards—polyester, single piece construction, fixed length111111122111121112TypeLengthStandardsPart No.HarnessConnectionAnchorageConnection Expanyard Single-Leg Twin-LegD-ringExtension 4.5' 5' 6'CSAZ259.11-05 E4ANSIZ359.1-200710023932 HL2000 HL2000 X X X10023933 HL2000 HL64 X X X10023970 Swivel HL2000 (2) HL2000 X X X10023971 Swivel HL2000 (2) HL64 X X X10023936 HL2000 HL2000 X X X10023937 Swivel HL2000 (2) HL2000 X X X10045936 HL2000 HL2000 X X X X10045938 Swivel HL2000 (2) HL64 X X X X10047290 Swivel HL2000 (2) GL3100 X X X X10053011 LS Snap LS Snap X X X10053012 LS Snap GL3100 X X X10053013 LS Snap (2) GL3100 X X X10053014 LS Snap LS Snap X X X X10053015 LS Snap GL3100 X X X X10053016 LS Snap (2) GL3100 X X X X10088065 36C 36C X X X10088066 36C 36CL X X X10088067 36C 36C X X X X10088068 36C 36CL X X X X10088069 36C 36C X X X10088070 36C 36CL X X X10088071 36C 36C X X X X10088072 36C 36CL X X X X10059837 Swivel LS Snap (2) GL3100 X X X X10088077 36C 36CL X X X X10035039 Loop HL2000 X X X10051873 Hitch Loop RL20 X X X X10062438 RL20 RL20 X X22Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Shock-Absorbing LanyardsPart No. 10088065Part No. 10088067Diamond Lanyard with Integral D-ring ExtensionPart No. 10059837Diamond Lanyard Assemble-To-Order MatrixApproval Style of Lanyard Single/Twin Leg Anchor ConnectorAnchor Connector(2nd Leg Twin Only)User ConnectorLengthNNon-CSA1Non-Expanyard1Single01HL2000 Snaphook00None01Hitch Loop04.5'CCSA2Expanyard2Twin02RL20 Snaphook01HL2000 Snaphook02HL2000 Snaphook15'03Coated RL20 Snaphook02RL20 Snaphook03RL20 Snaphook26'04HL64 Snaphook03Coated RL20 Snaphook04Coated RL20 Snaphook310'05GL3100 Snaphook04HL64 Snaphook05Swivel HL2000 Snaphook06LS Snaphook05GL3100 Snaphook06LS Snaphook07LI Snaphook06LS Snaphook07LI Snaphook08AL64 Snaphook07LI Snaphook08Swivel LS Snap09FP5K Snaphook08AL64 Snaphook0910089207 Carabiner10Sewn Loop09FP5K Snaphook10SRCA853 Carabiner1110089207 Carabiner10Sewn Loop11Sewn Loop12SRCA853 Carabiner1110089207 Carabiner1236C Snaphook13SRCC740 Carabiner12SRCA853 Carabiner1336CS Snaphook14SRCA722 Carabiner13SRCC740 Carabiner1536C Snaphook14SRCA722 Carabiner1636CL Snaphook1536C Snaphook1636CL SnaphookA-DIAPart NumberQuantity• Diamond Expanyard is not available in 4.5' or 5' lengths • ATO orders ship within 5 days of order• Only Diamond Lanyards with 36C, 36CL or 36CS snaphooks • Lanyards ordered using the ATO System are non-returnableor 10089207 carabiner meet ANSI Z359.1-2007Climbing with a twin-legDiamond Shock-Absorbing LanyardA Diamond Shock-Absorbing Lanyard used with the SkyLink Horizontal LifelineCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901023

Shock-Absorbing LanyardsSure-Stop Shock-Absorbing LanyardsSure-Stop Shock-Absorbing Lanyards use a tear-tape design to keep fall arrest forces below 900 pounds.Restraint lanyards are offered in adjustable and fixed lengths and are available in your choice of rope,cable, or web. Models below meet applicable OSHA regulatons and ANSI A10.32. Compliance with ANSIZ359.1-2007 and certification to CSA Z259.11-05 E4 are noted in the part number tables.New!Part No. 10088214Part No. 10088259 Part No. 10088260Web Shock-Absorbing Lanyards1121211Part No.HarnessConnectionAnchorageConnectiomTypeSingle-Leg Twin-Leg Tie-Back Adjustable Fixed ExpanyardHeavyWorkerStandardsCSAZ259.11-05 E410088259 36C 36C X X X10088260 36C 36CL X X X10088261 36C 36C X X X X10088262 36C 36CL X X X X10088265 36C 36C X X X10088266 36C 36CL X X X10088268 36C 36CL X X X10088267 36C 36C X X X10088269 Sewn loop 36CL X X X10088263 36C 36C X X X10088264 36C 36CL X X X10088213 36C 36C X X X X10088214 36C 36C X X X X10088215 Sewn loop 36C X X X X10088216 Sewn loop 36C X X X10088217 Sewn loop 36C X X X10088223* 36C 36C X X X10088224* 36C 36CL X X X10088225* 36C 36C X X X X10088226* 36C 36CL X X X X10088229* 36C 36C X X X10088230* 36C 36CL X X X10088231* 36C 36CL X X X10088232* 36C 36C X X X10088233* Sewn loop 36CL X X X10088227* 36C 36C X X X X10088228* 36C 36CL X X X X10088237* 36C 36C X X X X10088238* 36C 36C X X X X10088239* Sewn loop 36C X X X X10088240* Sewn loop 36C X X X10088241* Sewn loop 36C X X XANSIZ359.1-2007* ANSI Z359.1 does not recognize lanyard capacities above 310 pounds. Heavy worker lanyards are compliant to OSHA regulations only.24Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Shock-Absorbing LanyardsPart No. SWL4068703LS112Part No. SWL40400206LSWeb Shock-Absorbing Lanyards, continuedPart No.TypeMaterialLengthHarness AnchorageSingle Twin Nylon Polyester Connection Connection 3' 4' 6'CSAZ259.11-05 E4SPL4048406LS X X LS LS X XSWL40400206LI X X LI LI X XSWL40400206LS X X LS LS X XSWL40400206LLS X X LS LS X XSWL40400206LSH X X LS HL64 X XSWL40400206RM X X RM RM X XSWL404002P04LI X X LI LI X XSWL404002P06LI X X LI LI X XSWL4068104LS X X LS LS X XSWL4068703LS X X LS LS X XSWL4068704LS X X LS LS X XSWL4068706LS X X LS LS X XSWL4268706LS X X LS LS XSWLP0635A X X LS LS XStandardsANSIZ359.1-2007Part No. 10088120Cable Shock-Absorbing LanyardsPart No.HarnessConnectionAnchorageConnectionPart No. SCL4067304LS* ANSI Z359.1 does not recognize lanyard capacities above 310 pounds. Heavy worker lanyards are compliant to OSHA regulations only.Type Length StandardsSingle-Leg Twin-Leg Heavy Worker 4' 5' 6' 8'CSAZ259.11-05 E4SCL4067304LSTL LS LS X X XSCL4067304LS LS LS X X XSCL4067304RM RM RM X X XSCL4067305LS LS LS X X XSCL4067306LS LS LS X X XSCL4067306RM RM RM X X XSCL4067308LS LS LS X X XSCL4068104LS LS HL64 X X XSCL4068106LS LS HL64 X X10088120 36C 36C X X10088211 36C 36C X X10088212 36C 36CL X X10088234* 36C 36C X X10088235* 36C 36C X X10088236* 36C 36CL X XANSIZ359.1-2007Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901025

Shock-Absorbing LanyardsPart No. 10088221Part No. SNL4048404LS2Rope Shock-Absorbing LanyardsPart No.HarnessConnectionAnchorageConnectionWebSingle Twin Fixed AdjustableType Length StandardsHeavyWorker 4' 5' 6' 8' 10'CSAZ259.11-05 E410088219 36C 36C 1/2 " X X X X10088220 36C 36C 1/2 " X X X X10088221 36C 36C 1/2 " X X X X10088222 36C 36C 1/2 " X X X XSNL4048404LS LS LS 5/8 " X X X XSNL4048404RM RM RM 5/8 " X X X XSNL4048405LS LS LS 5/8 " X X X XSNL4048406LS LS LS 5/8 " X X X XSNL4048406RM RM RM 5/8 " X X X XSNL4048408LS LS LS 5/8 " X X X XSNL4048410LS LS LS 5/8 " X X X XSNL4078106LS HL64 LS 5/8 " X X X XSNL4098604LS HL2000 LS 5/8 " X X X XANSIZ359.1-20072Thermatek ® Shock-Absorbing LanyardThermatek Lanyards are designed for high-heat applications. This specialized design featuresa Tuffweld protective cover over the shock-absorber and a Kevlar back-up strap insidethe shock-absorbing pouch. Models below meet applicable OSHA regulations and ANSIA10.32. Compliance with ANSI Z359.1-2007 and certification to CSA Z259.11-05 E4 are noted inthe part number table. Additional options are available as outlined in the chart below.TypeLengthStandards12' Heavy Harness AnchorageCSA ANSIPart No. Single Twin Freefall Worker Connection Connection 4' 5' 6' Z259.11-05 E4 Z359.1-200710088246 X 36C 36C X X10088248* X X 36C 36C X10088247 X X 36C 36C X X10088252* X X 36C 36C X10088250 X 36C 36C X X10027104 X HL2000 HL2000 X X10023485 X HL2000 HL2000 X10026049 X RL20 RL20 X10026048 X X HL2000 HL2000 X10026060 X X RL20 RL20 X* ANSI Z359.1 does not recognize lanyard capacities above 310 pounds. Heavy worker lanyards are compliant to OSHA regulations only.Part No. 10088246Part No. 1002710426Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

222222Restraint LanyardsRestraint lanyards are primarily used for travel restriction (to restrain a worker from reaching a fall hazard) and workpositioning (stabilizing a worker at an elevated location) applications. All restraint lanyards meet applicable OSHAregulations and ANSI A10.32.Web Restraint LanyardsPart No.MaterialTypeLengthWeb Nylon Polyester Single-Leg Twin-Leg Adjust. FixedHarnessConnectionAnchorageConnection 2' 3' 4' 5' 6'Restraint LanyardsPart No. 10072499CSAZ259.11-05Standards505197 1" X X X RL20 RL20 X X505204 1" X X X RL20 RL20 X X505210 1" X X X RL20 RL20 X X505211 1" X X X LOOP RL20 X X505217 1" X X X LOOP RL20 X X10022279 1" X X X LOOP RL20 X X10022915 1" X X X LOOP HL2000 X X10056762 1" X X X FP5K LS X X10056763 1" X X X FP5K FP5K X X10072499 1" X X X LS LS X X XSWL3268702LS 1" X X X LS LS X XSWL3268703LS 1" X X X LS LS X XSWL3268704LS 1" X X X LS LS X XSWL3268706LS 1" X X X LS LS X X10089345 1" X X X 36C 36C X X10089347 1" X X X LOOP 36C X X10089346 1" X X X LOOP 36C X X505088 1" X X X HL2000 HL2000 X505097 1" X X X HL2000 HL2000 XANSIZ359.1-200722Rope Restraint LanyardsPart No.Part No. SNL3243404LSPart No. SNL3278106LSMaterialTypeLengthRope Nylon Polyester Single Adjust. FixedHarnessConnectionAnchorageConnection 2' 3' 4' 5' 6' 7' 8' 9' 10' 12'505202 5/8" X X X RL20 RL20 X X505203 5/8" X X X RL20 RL20 X X415723 5/8" X X X RL20 RL20 X X415724 5/8" X X X RL20 RL20 X X10022912 1/2" X X X RL20 RL20 X X10022914 1/2" X X X HL2000 HL2000 X XSNL3248402LS 5/8" X X X LS LS X XSNL3248403LS 5/8" X X X LS LS X XSNL3248403RM 5/8" X X X RM RM X XSNL3248403LS 5/8" X X X LS LS X XSNL3248404LS 5/8" X X X LS LS X XSNL3248405LS 5/8" X X X LS LS X XSNL3248405RM 5/8" X X X RM RM X XSNL3248406LS 5/8" X X X LS LS X XSNL3248406RM 5/8" X X X RM RM X XSNL3248407LS 5/8" X X X LS LS X XSNL3248408LS 5/8" X X X LS LS X XSNL3248409LS 5/8" X X X LS LS X XSNL3248410LS 5/8" X X X LS LS X XSNL3248412LS 5/8" X X X LS LS X XSNL3278104LS 5/8" X X X LS HL64 X XSNL3278106LS 5/8" X X X LS HL64 X X415108 5/8" X X RL20 RL20 X505002 1/2" X X HL2000 HL2000 X505012 1/2" X X HL2000 HL2000 X505166 5/8" X X HL2000 HL2000 X505201 1/2" X X RL20 RL20 XCSAZ259.11-05StandardsANSIZ359.1-2007Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901027

Restraint LanyardsCable Restraint LanyardHarness AnchorageLength TypePart No. Width Connection Connection 3' 4' 6' Fixed505063 1/4" HL2000 HL2000 X XSCL3267304LS 1/4" LS LS X XSCL3267306LS 1/4" LS LS X XSCL3267303LS 1/4" LS LS X XSCL3267306RM 1/4" LS LS X XPart No. 505063Part No. 10044811Part No. SCH3187511Rebar AssembliesDesigned for work positioning applications such as tying rebar or constructing concrete forms.Meets applicable OSHA regulations, ANSI A10.32, and select models are CSA certified.Part No. 1007249811Part No.DescriptionStandardsCSA Z259.11-05415957 Rebar chain assembly, large snaphook with 2.5” (64mm) gate X10044811 Rebar chain assembly, GL3100 snaphook with 2.25” (57mm) gate10072498 Rebar web assembly, 13” legs, with sliding large snaphook XSCH3187511 Rebar web assembly, 18” legs, with sliding large snaphook XSure-Grab Positioning LanyardConnects to the user’s harness or belt for travel restriction or work positioning applications.Features fast and easy length adjustment. Meets applicable OSHA regulations and ANSI A10.32.2Part No.SNYR537DH306DescriptionSure-Grab positioning lanyard, manual, closed body, c/w 5/8” x 6’ blue StaticKernmantle, chrome locking swivel snaphook, right-handed versionSure-Grab Positioning LanyardPart No. SNYR537DH306SNYL537DH306Sure-Grab positioning lanyard, manual, closed body, c/w 5/8” x 6’ blue StaticKernmantle, chrome locking swivel snaphook, left-handed versionLineman’s Pole StrapThe Lineman’s Pole Strap is used to assist a lineman in climbing wooden poles and for workpositioning. Meets applicable OSHA regulations and ANSI A10.32.Part No.Description415834 Lineman’s polestrap, nylon, adjustable to maximum length of 70"Lineman’s Pole StapPart No. 415834Shock-Absorbing Sub-Assembly Lanyards2Part No.NylonMaterialPolyesterHarnessConnectionAnchorageConnectionSSA4002LS X LS D-Ring10088064 X 36C D-RingHeavyWorker*10090058 X 36C D-Ring X* ANSI Z359.1 does not recognize lanyard capacities above 310 pounds. Heavy worker lanyards are compliant to OSHA regulations only.Part No. 1008806428Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

1Anchorage Connectors• Have a minimum break ing strength of 5,000 lb.• Are compatible for use with MSA fall arrest and confined spaceentry/retrieval com po nents• Meet ANSI Z359.1-2007, ANSI A10.32 and all applicable OSHA regulationsAnchorage Connector Strap• Standard 5-ft. length, custom lengths available• D-ring on one end and a sewn loop on theother endAnchorage Connector StrapPart No. 505282Double D-Ring Anchorage Connector StrapBoom BeltDouble D-Ring Anchorage Connector StrapPart No. SFP2267503• Attaches to boom arm• Adjustable• Allows for quick & easy installationPart No.Boom BeltPart No. SSB22040Description10042792 PointGuard residential anchorage connector strap, 3’ with D-ringAnchorage ConnectorsAnchorage Connector Chain• Temporary anchorage connector• Useful near sharp edges or in high heatenvironmentsPointGuard Anchorage Connector StrapThe PointGuard Anchorage Connector provides a secure point ofattachment for residential and concrete construction applications.When the anchorage connector is no longer needed a worker cansimply cut the protruding strap and throw it away.• Quick and easy to install• Economical• Available in 2 models - Residential Construction Meets all applicable OSHAregulations as well asANSI A10.32 and ANSI Z359.1 Concrete Construction Includes protective sheath Meets all applicable OSHAregulations as well asANSI A10.32 and ANSI Z359.1Anchorage Connector ChainPart No. 10003206PointGuard ConcretePart No. 10042794PointGuardResidentialPart No.10042792• Durable Polyester Webbing with 5,000-pound min i mum breaking strength• 400-pound (182 kg) capacity110042794 PointGuard concrete anchorage connector strap, 4’ with D-ring11110072793 PointGuard residential anchorage connector strap, 3’10072795 PointGuard concrete anchorage connector strap, 4’505282 An chor age connector strap, nylon, 5'10023490 An chor age connector strap, double D-ringSFP2267503 Double D-Ring Anchorage Connector Strap, 3' lengthAnchorage Cable Sling• Standard lengths of 2’, 4’, and 6’,custom lengths available• Vinyl Coated• 1/4” Galvanized CableAnchorage Cable SlingPart No. SFP326750421SFP2267504SFP2267506Double D-Ring Anchorage Connector Strap, 4' lengthDouble D-Ring Anchorage Connector Strap, 6' lengthSuretyman Anchorage Sling11505298 An chor age connector strap, polyester, 5'10003206 Chain anchorage connectorSSB22040 Boom belt, 1-3/4” nylon webbing, adjustable, one size fits allSFP3267504 Anchorage Cable Sling, 4' lengthSFP3267506 Anchorage Cable Sling, 6' lengthAnchorage SlingPart No. SFP2267402• 1” nylon tube webbing sewn into an endless loop• Available in 2’, 4’, and 6’ lengths• Can be hitched to an anchorage point using various configurations11SFP2267402SFP2267404SFP2267406Suretyman Anchorage Sling, 2’ lengthSuretyman Anchorage Sling, 4’ lengthSuretyman Anchorage Sling, 6’ lengthAnchorage Connector Extension• Vinyl coated• 1/4” galvanized cableAnchorageConnectorExtensionPart No. 5052332505233 Anchorage Connector extension, 5', 36C, O-ring210001620 Anchorage Connector extension, 6', RL20, O-ring210082683 Anchorage Connector extension, 12', RL20, O-ring110087003 Anchorage Connector extension, 6', FP5K, O-ringCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901029

Anchorage ConnectorsFP Stryder Anchorage ConnectorFP StryderPart No. 10051455• Easy, single-hand installation• Low friction wear pads with Teflon allow theFP Stryder Anchorage Connector to glideeffortlessly along the beam flange• Lightweight - only 4.5 pounds• Integral load indicator alerts user ifunit has been exposed to a fall• Versatile design allows for mounting overhead or at worker’s feet• Vernier adjustability allows for a secure fit and 1/4”adjustment increments• Easy to use, push button adjustment - no pins to be lost!• 2 models available to fit most beam sizes Standard version fits beam flange widths from 4" to 14" XL version fits beam flange widths from 14" to 24"• 400-pound working capacityBeamGrip • At tach es to I-beam flange—no tools required• Optional D-ring insert (P/N 506643)and/or swivel D-ring (P/N 506673)can pro vide anchorage con nec tionfor one or two persons (D-rings soldseparately)BeamGlide Trolley• Pro vides horizontal mobility—keeps anchorage connectordi rect ly overhead• Siz ing to fit all beamsBeamGlide TrolleyRemovable ModelPart No. 506266BeamGripPart No. 506682,shown with Part No. 506643and Part No. 50667312211Part No.Description10051455FP Stryder Anchorage Connector, Standard version, fits beamflange widths from 4” - 14”10051456FP Stryder XL Anchorage Connector, XL version, fits beamflange widths from 14” - 24”FP Stryder Anchorage Connector Kit, containing one10051457 complete Standard version FP Stryder, one XL adjustment bar,one carrying case, and one adjuster button replacement kit506682BeamGrip for beams with flange width: 3.94” to 5.64”flange thickness: .205” to .659”415171BeamGrip for beams with flange width: 5.525” to 8.07”flange thickness: .36” to 1.09”415172BeamGrip for beams with flange width: 8.06” to 10.475”flange thickness: .56” to .935”415173BeamGrip for beams with flange width: 10.265” to 12.8”flange thickness: .605” to 1.25”506643 D-Ring insert for BeamGrip506673 Swivel D-Ring10072789 506682 BeamGrip with swivel D-Ring506266 BeamGlide Trolley, removable model506252 BeamGlide Trolley, permanent model506379 Trolley End Stops (pair)10016468 Permanent roof anchor, 2" x 4"10017593 Permanent roof anchor, 2" x 6"10017594 Permanent roof anchor, 2" x 8"10017595 Permanent roof anchor, 2" x 10"10017596 Permanent roof anchor, 2" x 12"416068 Temporary roof anchor, 3-pack506632 D-plate anchorage connector, zinc-plated steel506669 D-plate with 8 x 8 galvanized back plate506672 D-plate with 8 x 8 aluminum back plate10003213 Bolt D-Ring with hole only10062597 Single bolt anchor10002820 Large hook with strapRoof Anchors• All steel con struc tion• Fit all pitch es of roof truss es or rafters• Easy to install without spe cial toolsTemporary Roof AnchorsPart No. 416068D-Plate Anchorage Connector• Provides per ma nent anchorage point• Bolts to beams or columns• Also available with 8”x 8” back-plate made of blackan od ized aluminum or galvanized steel for attachmentto concrete wallsD-Plate Anchorage ConnectorPart No. 506632Bolt D-ring with Hole• Per ma nent an chor age con nec tor• At tach es to bottom of I-beam flange,user supplies bolt• Designed for hor i zon tal installationSingle Bolt AnchorBolt D-ring with HolePart No. 10003213• Permanent anchorage connector• Bolts to vertical columns Single Bolt AnchorPart No. 1003213Large Hook with Strap• Large 2-1/2” throat-opening hook withintegral strap and D-ring• Compatible with all MSA lanyards andvertical lifelinesPermanent Roof AnchorPart No. 10016468Large Hookwith StrapPart No. 1000282030Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

ManSafe Freestanding Constant Force Post• Does not attach to the working surface• Installer will never have to lift morethan 55 lbs (25 kg) at any time• Used on nominally flat roofs up toa maximum pitch of 5 degrees• Tested and approved for use onconcrete, single-ply membrane,asphalt-sanded, asphalt-stonechipped, and steel roof profiles• Post is omni-directional• Meets OSHA regulations onlyManSafe Freestanding Post*Part No.10055719* Post D-ring (Part No. 10038363)must be purchased separately.Anchorage ConnectorsCarabinersMSA offers a wide variety of carabiners for almost everyap pli ca tion. All carabiners have a minimum breaking strengthof 5,000 lbs. All carabiners meet applicable OSHA regulations.See chart for additional standards tPart No. 506259Part No. 10089205Part No. SRCA722Part No. SRCC641Removable Concrete Anchors• Quickly and easily removed and reinstalled in another location• Compact and lightweight• Durable stainless steel and aluminum construction• 400 lb capacity• 2 models: 5,000 lb version (5K) and 10,000 lb (10K) version• 10,000 lb version can be used to anchor MSA Dyna-Line or Sure-LineHorizontal LifelinesPart No. 506572Part No. 10089207Part No. SRCA853Part No. SRCA6135K Removable Concrete AnchorPart No. 1008159410K Removable Concrete AnchorPart No. 10081570Part No. 506308Part No. 10089209Part No. SRCC740Part No. SRCC642Rail-Slider Rail-SliderPart No. SFPRS6000• Provides fall protection during horizontalmovement on railway bridges• Quick and easy installation• 2 sizes available111Part No.Description10055717 ManSafe Freestanding Constant Force Post, 440 lbs (200 kg)10055718 ManSafe Freestanding Constant Force Post, 660 lbs (300 kg)10055719 ManSafe Freestanding Constant Force Post, 880 lbs (400 kg)10055716220 lb (100 kg) Upgrade kit for ManSafe Freestanding ConstantForce Post10038363 Post D-ring for ManSafe Freestanding Constant Force Post10081594 5K removable concrete anchor10081570 10K removable concrete anchorRail-Slider, steel, galvanized, for 80 - 136 # rail, used onSFPRS6000 train/crane type rail, [carabiner required - sold separately(see page 31)]Rail-Slider, steel, galvanized, for 141 # rail, used on train/crane10030608type rail, [carabiner required - sold separately (see page 31)]111Part No.506259506572506308100892051008920710089209SRCC413SRCA853SRCC740SRCC641SRCA613SRCC642SRCA722SRCC643DescriptionCarabiner, 7/8” (22 mm) gate, twistlock, auto-locking, aluminumCarabiner, 7/8” (22 mm) gate, twistlock, auto-locking, steelCarabiner, 2” (50 mm) gate, twistlock, auto-locking, steel, withcaptive eyeCarabiner, 9/16" (14 mm) gate,auto-locking, steel, 3,600-lbgate strengthCarabiner, 1" (25 mm) gate,auto-locking, steel, 3,600-lbgate strengthCarabiner, 2.1" (53 mm) gate,auto-locking, steel, 3,600-lb gatestrengthCarabiner, 9/16" (14 mm) gate,auto-locking, steelCarabiner, 1” (25 mm) gate,auto-locking, aluminumCarabiner, 2" (50 mm) gate,auto-locking, steelCarabiner, large D design, 1.2"(32 mm) gate, screwgate, steelCarabiner, 3/4” (19 mm) gate,auto-locking, aluminumCarabiner, 1.2" (52 mm) gate,auto-locking, steel, NFPACarabiner, 2.1" (52 mm) gate,auto-locking, aluminumCarabiner, 1" (25 mm) gate,auto-locking, steelStandardsCSAZ259.12-2001XXXXXXXXXXXANSIZ359.1-2007XXXCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901031

Fall Protection KitsFall Protection KitsThermatek ® KitIncludes:• Thermatek Harness, standardsize, made of a Kevlar/Nomexblend webbing that is resistantto chemicals, weld splatter, andother high heat exposures.• Thermatek Shock-AbsorbingLanyard features a burnresistantTuffweld protectivecover that is superior to Nomex.The Thermatek 12 lanyardmodel is designed to arrest afreefall up to 12’ and keep fall arrest forces below OSHA limits.• Thermatek Anchorage Connector Strap with Kevlar webbing and stitchinghas a replaceable wear pad to protect webbing from abrasion.• Carrying Bag for convenience.Aerial Lift KitThe FP Pro Harness provideswearers with comfortableprotection even after long hoursof use. Fitting a wide range ofbody types and sizes, the FP ProHarness is easy to don with colorcontrasting thigh and torsostraps differentiating top frombottom. Designed with a durablepolyester sheath, the FP DiamondShock-Adsorbing Lanyard keeps fallarrest forces below 900 lbs. The FP diamondlanyard features a pouchless design, single andtwin-leg configurations and a highly visible deployment tag to reduceweight, increase versatility and improve ease of use.Thermatek Kit with HL2000 Snaphooks with RL20 SnaphooksKit with Thermatek 6 Lanyard 10026061 10026063Kit with Thermatek 12 Lanyard 10026062 10026064Part No.10066285DescriptionAerial Lift Kit, includes FP Pro Harness,Diamond Shock-Absorbing Lanyard and carrying bag21FP Pro Harnesses/Diamond Lanyard KitsTwo great products in one easy to order kit! These kits areavailable with your choice of a Cross-Chest or Vest-StyleFP Pro Harness with or without hip D-rings, and with asingle or twin-leg FP Diamond Shock-Absorbing Lanyard.All kits include carrying bag.Part No.10062329100623161006241110062405FP Pro Harness/Diamond Lanyard KitPart No. 10062316DescriptionFP Pro Cross-Chest Harness, STD size, Qwik-fit leg straps,back D-ring, Diamond LanyardFP Pro Vest-Style Harness, STD size, Qwik-fit leg straps, back D-ring,Diamond LanyardFP Pro Cross-Chest Harness, STD size, Tongue Buckle leg straps,back D-ring, Diamond LanyardFP Pro Vest-Style Harness, STD size, Qwik-fit chest strap and TongueBuckle leg straps, back D-ring, Diamond LanyardAdditional sizes available. Contact MSA Customer Service Center for details.RCD ® (Remote Connect/Disconnect) SystemBy using the strap tool the user can install theanchorage connector strap to an approvedoverhead anchorage point. By using theconnect/ disconnect tool the user canattach any lifeline with an RL20snaphook to the overhead anchorageconnector strap, use the same tool toremove the lifeline from the overhead anchorageand then to remove the anchorage connector strap.Part No.Description501443 Remote Connect/Disconnect System505314 Strap Conn Remote Anchor506507 Pole Telescoping Remote506509 Tool Remote Anchorage Strap596589 Tool Remote Connect506591 Remote Lanyard Knife Tool506639 Pole Adjustable Modified RCD506640 Adapter Hastings Pole RCD506642 Pole Adjust Assembly Unmodified RCDAnthron Descent Device SystemThe Anthron Descent Controller is a manually operated descent device. It is most commonly used forsuspended work positioning, self evacuation, or rescue operations. Other features include:• Proper roping/rigging diagrams on the side of the Anthron Descender• Device can be installed/removed at any point on rope• Working load of 300 lbs (136 kg)• System consists of a 7/16” (11mm) rope, Anthron Descender, and two carabinersAnthronDescenderPart No.SDC726050SDC726100SDC726150DescriptionAnthron system includes: Anthron descender, 2 carabiners, 50 ft ropeAnthron system includes: Anthron descender, 2 carabiners, 100 ft ropeAnthron system includes: Anthron descender, 2 carabiners, 150 ft ropeAnthron Systemin useAnthron systems and replacement ropes available in lengths of 25-ft increments from 50 ft up to 600 ft32Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Roofers’ KitsFall Protection KitsWorkman Roofers’ KitPart No. 10074476Workman Roofers’ KitPart No. 10092958Part No.Description10074475 Roofer’s KitKit ContentsWorkman Harness, Vest-Style STD size, with Qwik-Fit leg straps25’ rope lifeline with trailing rope grabRoof anchorStorage bucketRoofer’s Kit, Part No. 10074474 same as above with 50’ rope lifelinePart No.Description10074480 Roofer’s KitKit ContentsWorkman Harness, Vest-Style STD size, with Qwik-Fit leg straps25’ rope lifeline with manual rope grabStorage bagRoofer’s Kit, Part No. 10074479 same as above with 50’ rope lifelinePart No.Description10077584 Roofer’s KitKit ContentsWorkman Harness, Vest-Style XLG size, with Qwik-Fit leg straps25’ rope lifeline with trailing rope grabRoof anchorStorage bucketRoofer’s Kit, Part No. 10077583 same as above with 50’ rope lifelinePart No.Description10077588 Roofer’s KitKit ContentsWorkman Harness, Vest-Style XLG size, with Qwik-Fit leg straps25’ rope lifeline with manual rope grabStorage bagRoofer’s Kit, Part No. 10077587 same as above with 50’ rope lifelinePart No.Description10074477 Roofer’s KitKit ContentsWorkman Harness, Vest-Style STD size, with tongue buckle leg straps25’ rope lifeline with trailing rope grabRoof anchorStorage bucketRoofer’s Kit, Part No. 10074476 same as above with 50’ rope lifelinePart No.Description10092959 Roofer’s KitKit ContentsWorkman Harness, Vest-Style STD size, with tongue buckle leg straps25’ rope lifeline with manual rope grabStorage bagRoofer’s Kit, Part No. 10092958 same as above with 50’ rope lifelinePart No.Description10074482 Roofer’s KitKit ContentsWorkman Harness, Vest-Style XLG size, with tongue buckle leg straps25’ rope lifeline with trailing rope grabRoof anchorStorage bucketRoofer’s Kit, Part No. 10074481 same as above with 50’ rope lifelinePart No.Description10077590 Roofer’s KitKit ContentsWorkman Harness, Vest-Style XLG size, with tongue buckle leg straps25’ rope lifeline with manual rope grabStorage bagRoofer’s Kit, Part No. 10077589 same as above with 50’ rope lifelineCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901033

Fall Protection KitsRoofer’s KitPart No. 10055733FP Pro Roofers’ KitPart No. 4160672Part No.416067 Roofer’s KitKit Contents (Meets ANSI Z359.1-2007)Description415947FP Pro Harness, Vest-Style STD size, with Qwik-Fit chest and legstraps, and back D-ring415940Trailing Rope Grab Fall Arrester with Sure-Stop Shock-Absorbinglanyard and 36C snaphook41604950' - 5/8" Rope, polyester/polypropylene, with twist-lock carabineron one end416070 Temporary roof anchor (3)10001360 Woodscrews, #12 x 2.5" Philips flathead, zinc10001422 Roofer's Kit Tote BagPart No.10055733 Roofer’s KitKit ContentsDescription415947FP Pro Harness, Vest-Style STD size, with Qwik-Fit chest andleg straps, and back D-ringSVLR537R018LSManual Rope Grab Fall Arrester with Sure-StopShock-Absorbing lanyard and LS snaphook10092664 50' - 5/8" Rope, polysteel/polyester, with LS snaphook416070 Temporary roof anchor (1)6 gallon bucket with lid2Part No.10063412 Roofer’s KitKit ContentsDescription415947FP Pro Harness, Vest-Style STD size, with Qwik-Fit chest andleg straps, and back D-ringSVLR537R018LSManual Rope Grab Fall Arrester with Sure-Stop Shock-Absorbing lanyard and LS snaphook10092664 50' - 5/8" Rope, polysteel/polyester, with LS snaphook416070 Temporary roof anchor (3)10057342 Storage bagRoofer’s KitPart No. 10049751Part No.10057104 Roofer’s KitKit ContentsDescriptionFP Pro Harness, Vest-Style STD size, with Qwik-Fit chest and10056986 leg straps, and back D-ring; includes integral Sure-StopShock-Absorber with D-ringManual Rope Grab Fall Arrester with Sure-Stop Shock-Absorbing10092779lanyard and manual-lock carabiner10092664 50' - 5/8" Rope, polysteel/polyester, with LS snaphook416070 Temporary roof anchor (3)10001360 Woodscrews, #12 x 2.5" Philips flathead, zinc6 gallon bucket with lid1Part No.10049751 Roofer’s KitKit ContentsDescription415947FP Pro Harness, Vest-Style STD size, with Qwik-Fit chest andleg straps, and back D-ring10056054Trailing Rope Grab Fall Arrester with Sure-StopShock-Absorbing lanyard and LS snaphook10092662 25' - 5/8" Rope, polysteel/polyester, with LS snaphook416070 Temporary roof anchor (1)6 gallon bucket with lidAll FP Pro products are fully compliant with applicable OSHA regulations and ANSI A10.32. Check Part No. tables for additional standards information.34Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Fall Protection KitsRoofers’ KitPart No. 10055061Roofers’ KitPart No. SVL1013025Part No.10055061 Roofer’s KitKit ContentsDescriptionGravity Harness, Vest-Style STD size, with Qwik-Fit chest andSSH30420300 leg straps, and back D-ring; includes integral Sure-StopShock-Absorber with D-ringManual Rope Grab Fall Arrester with Sure-Stop10092779Shock-Absorbing lanyard and manual-lock carabiner10092662 25' - 5/8" Rope, polysteel/polyester, with LS snaphook416070 Temporary roof anchor (3)10001360 Woodscrews, #12 x 2.5" Philips flathead, zinc10001422 Roofer's Kit Tote BagPart No.SVL1013025Kit ContentsRoofer’s KitDescriptionSSH30420000Gravity Harness, Vest-Style STD size, with Qwik-Fit chest andleg straps, and back D-ringSVLR537R018LSManual Rope Grab Fall Arrester with Sure-StopShock-Absorbing lanyard and LS snaphook10092662 25' - 5/8" Rope, polysteel/polyester, with LS snaphook6 gallon bucket with lidRoofer’s Kit, Part No. SVL1013050 same as above with 50’ vertical lifelineRoofer’s Kit, Part No. 10055000 same as above with 50’ vertical lifelineRoofers’ KitPart No. 10030433Part No.Description10030433 Roofer’s KitKit Contents (CSA Certified)SVLR78CS Rope Grab Fall Arrester with integral shock-absorberSLLPB672060LS 60' Rope lifelineCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901035

Rope Grabs and Vertical LifelinesRope Grabs and Vertical LifelinesFP Pro Rope GrabUnique, versatile, lightweight and affordable, the FP Pro Rope Grab features:• Hands-free operation while ascending or descending• Ultra-smooth travel action• Cam and hinge design allows for a quick, easy installation on the rope• Available with either polyester or polyester/polypro py lene blend rope• Rope Grabs and ropes with 36C snaphook meet ANSI Z359.1-2007Rope GrabsVertical LifelinesFP Pro Rope Grab with 3'Dyna-Brake LanyardPart No. 415940Rope Grab Fall ArresterPart No. 10054077Part No.DescriptionPart No. Description Length12415940FP Pro Rope Grab with 3' Sure-Stop Lanyard,36C snaphook415941 Rope Grab with 12' fixed nylon lanyard, 36C snaphook415942Rope Grab kit with 50’ -5/8” rope, polyester,anchorage connector strap12415865 5/8" polyester rope, w/36C Snaphook on one end 25'415869 5/8" polyester rope, w/36C Snaphook on one end 50'415870 5/8" polyester rope, w/36C Snaphook on one end 75'415871 5/8" polyester rope, w/36C Snaphook on one end 100'415943415964Rope Grab kit with 100’ -5/8” rope, polyester,anchorage connector strapRope Grab kit with 50’ -5/8” rope, polyester/propylene,anchorage connector strap415872 5/8" polyester rope, w/36C Snaphook on one end 150'415873 5/8" polyester rope, w/36C Snaphook on one end 200'416048 5/8" polyester/polypropylene rope, w/twist-lock carabiner on one end 25'1415965Rope Grab kit with 100’ -5/8” rope, polyester/propylene,nylon anchorage connector strap10054077 Rope Grab fall arrester2416049 5/8" polyester/polypropylene rope, w/twist-lock carabiner on one end 50'416050 5/8" polyester/polypropylene rope, w/twist-lock carabiner on one end 75'416051 5/8" polyester/polypropylene rope, w/twist-lock carabiner on one end 100'416052 5/8" polyester/polypropylene rope, w/twist-lock carabiner on one end 150'416053 5/8" polyester/polypropylene rope, w/twist-lock carabiner on one end 200'SureGrab Rope GrabThe SVLR78 SureGrab device and lifeline is used to provide temporary fall protection on ladders orwhen climbing vertical structures. This system can also be used to provide a secondary lifeline forsuspended positioning systems used by building/structure inspectors, window cleaners, andmaintenance personnel. The SureGrab device moves freely up or down an approved 5/8” (16 mm)diameter lifeline. When sudden downward movement occurs, a camming lever is activated arrestingthe fall. The device can be installed or removed from the lifeline at any point along its length.Meets and exceeds ANSI Z359.1 and OSHA standards. SureGrab rope grabs are CSA certified.SureGrab Rope GrabsCarabinerPart No. SRCC643Termination PlatePart No. SRIW100012Part No.SVLR78LSSRIW1000SLLNL672060LSSLLNL672100LSSLLNL672200LSDescriptionRope grab fall arrester, automatic/manual, open body, c/w 1-3/4” x 12” web lanyard,LS snaphook5/8” Termination PlateLifeline, nylon, white 3-strand, 5/8” x 60-ft (16mm x 20m) with LS snap on one endLifeline, nylon, white 3-strand, 5/8” x 100-ft (16mm x 30.5m) with LS snap on one endLifeline, nylon, white 3-strand, 5/8” x 200-ft (16mm x 61m) with LS snap on one endSureGrab Fall ArresterLanyardPart No. SVLR78LSSureStop VerticalLifeline36Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Self-Retracting LanyardsWith its solid design and fast-acting brake mechanism, you can be confident that theWorkman Personal Fall Limiter (PFL) will be there for you when you need it most.Workman ® PFL features include:• A field-replaceable lifeline• A 400-pound working capacity• No annual factory recertification required• Integral load indicator• Integral swivel at PFL connector• A durable, engineered thermoplastic housing• Meets ANSI A10.32 and all applicable OSHAstandards. Compliance with ANSI Z359.1-2007and certification to CSA Z259.2.2 is noted in thepart number table.Self-Retracting LanyardsWorkman PFLPart No. 100933492212122Workman PFLStandardsPart No.DescriptionPFLConnectionLifelineConnectionCSAZ259.2.2ANSIZ359.1-200710093348 Workman PFL, 12' line length None LI Snaphook10093349 Workman PFL, 12’ line length None LC Snaphook10093350 Workman PFL, 12’ line length 1" Steel Carabiner LC Snaphook10093352 Workman PFL, 12’ line length Back D Connector LC Snaphook10093353 Workman PFL, 12’ line length 1" Steel Carabiner 36C Snaphook X10093354 Workman PFL, 12’ line length None 36C Snaphook X10093351 Workman PFL, 11’ line length Back D Connector AL64 Snaphook10093355 Workman PFL, 10’ line length None LI Snaphook X10093356 Workman PFL, 10’ line length None LC Snaphook X10093357 Workman PFL, 10’ line length 1" Steel Carabiner LC Snaphook X10093358 Workman PFL, 10’ line length Back D Connector LC Snaphook XWorkman ® PFL Line Replacement KitsReplacement Lifeline,12’ LengthReplacement Lifeline,10’ LengthLifelineConnection10093799 10093819 LI Snaphook10093812 10093822 Swivel Carabiner10093811 10093821 1" Aluminum Carabiner10093800 10093820 1" Steel Carabiner10093813 10093823 LS Snaphook10093814 10093824 AL64 Snaphook10093815 10093825 LC Snaphook10093816 10093826 LS Swivel Snaphook10093797 10093817 36C Snaphook10093798 10093818 36CSN Swivel SnaphookfrontbackAttaching thesnaphook to theintegral swivelcreates acomfortable,convenientcarrying handle.Workman Personal Fall Limiter Assemble-To-Order MatrixApprovals Line Length SRL Connector Lifeline Connector Field-Replaceable LineCCSA & OSHA066'0None0LI SnaphookNNoAANSI Z359.1 & OSHA077'1Back D-ring Connector1Swivel CarabinerYYesOOSHA & ANSI A10.32088'21" Aluminum Carabiner21" Aluminum Carabiner099'31" Steel Carabiner31" Steel Carabiner1010'42" Aluminum Carabiner4LS Snaphook1111'52" Steel Carabiner5AL64 Snaphook1212'636CL Snaphook6LC Swivel Snaphook7LS Swivel Snaphook836C Snaphook936CSN SnaphookA-APTPart NumberQuantity• ATO orders will ship within 5 days of order• Products ordered using theATO System are non-returnableCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901037

Self-Retracting LanyardsAprtura LT30 SRL features include:• A field-replaceable lifeline• A 400-pound working capacity• No annual factory recertification required• Integral load indicator• Integral swivel at SRL connector• A durable, engineered thermoplastic housing• Meets ANSI A10.32 and all applicable OSHAstandards. Compliance with ANSI Z359.1-2007and certification to CSA Z259.2.2 is noted in thepart number table.Aptura ® LT30 SRL1111Part No.DescriptionSRLConnectionLifelineConnectionCSAZ259.2.210050504 Aptura LT30, 30' line length None LI Snap X10053558 Aptura LT30, 30' line length None HL2000 X10053560 Aptura LT30, 30' line length 1” Steel Carabiner HL2000 X10053559 Aptura LT30, 30' line length 1” Steel Carabiner LS Snap XStandards*ANSIZ359.1-200710088386 Aptura LT30, 30' line length None 36C X10088387 Aptura LT30, 30' line length 1” Steel Carabiner 36C X10058886 Aptura LT30, 30' line length None Swivel LS XAPTURA LT30Part No.10053558* Only Aptura SRLs with 36C or 36CS snaphook and Back D-Ring Connector or 1” Steel Carabiner meetANSI Z359.1-2007Aptura LT30 Self-Retracting Lanyard Assemble-To-Order MatrixApproval Line Length SRL Connector Lifeline Connector Field-Replaceable LineNNon-CSA0813'00None00None (Sewn Loop)0NoCCSA0914'01Back D-ring Connector (P/N 10089205)01HL2000 Snaphook (P/N 10002490)1Yes1015'021" Aluminum Carabiner (P/N SCRA853)02Swivel HL2000 Snaphook (P/N 10023769)1116'031" Steel Carabiner (P/N 10089207)03RL20 Snaphook (P/N 520603)1217'042" Aluminum Carabiner (P/N SRCA722)04Swivel RL20 Snaphook(P/N 520691)1318'052" Steel Carabiner (P/N 506308)05LI Aluminum Snaphook (P/N 10014393)1419'061" Steel Carabiner (P/N SRCC643)1520'071" Aluminum Carabiner (P/N SRCA853)1621'081" Steel Swivel Carabiner (P/N 10021804)1722'09LS Snaphook (P/N SHWSS31690LS)1823'10AL64 Snaphook (P/N 10043811)1924'11LS Swivel Snaphook (P/N 10053393)2025'12LS Swivel Snaphook w/ Load Indicator (P/N 10038740)2126'1336C Snaphook (P/N 10088270)2227'1436CS Snaphook (P/N 10089159)2328'2429'2530'A-APTPart NumberQuantity• ATO orders will ship within 5 days of order• Products ordered using theATO System are non-returnable38Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Self-Retracting LanyardsDyna-Lock ® SRL’sThe MSA Dyna-Lock Self-Retracting Lanyards (SRL) are fast-acting fall arresters that limit free-fall distance,deceleration distance, and fall arrest forces while allowing user freedom of movement. The Dyna-Lock SRLis ideal for climbing applications where vertical mobility is needed. All Dyna-Lock SRLs meet applicableOSHA regulations and ANSI A10.32. See chart below for ANSI Z359.1-2007 and CSA compliance.Capacity (working load)For 20' web; 30', 50', 70' and 95' cable Dyna-Lock Models:• Maximum: 400 lbs (181 kg)• Minimum: 75 lbs (34 kg)For 20' cable model:• Maximum: 310 lbs (140 kg)• Minimum: 75 lbs (34 kg)Arrest Force• 75–310 lbs < 900 lbf (4 kN)• 311–400 lbs < 1800 lbf (8 kN)Arrest Distance• 75–310 lbs < 40 in (101.6 cm)• 311–400 lbs < 54 in (137 cm)Standards1122211222Part No. Model Length CSA Z259.2.2 ANSI Z359.1-2007506202 Galvanized Wire Rope 10M (30') X506204 Galvanized Wire Rope 16M (50') X506206 Galvanized Wire Rope 22M (70') X506208 Galvanized Wire Rope 30M (95') X506203 Stainless Steel Wire Rope 10M (30') X506205 Stainless Steel Wire Rope 16M (50') X506207 Stainless Steel Wire Rope 22M (70') X506209 Stainless Steel Wire Rope 30M (95') X506615 Nylon Web 20' X10017931 Wire Rope Dyna-Lock 20' X506619 Backpacker, Web 20'10006470 Galvanized Wire Rope 30' X10006468 Galvanized Wire Rope 50' X10006466 Galvanized Wire Rope 20' X10006464 Galvanized Wire Rope 95' X10006469 Stainless Steel Wire Rope 30' X10006467 Stainless Steel Wire Rope 60' X10006465 Stainless Steel Wire Rope 70' X10006463 Stainless Steel Wire Rope 95' X10006447 Nylon Web 20' X10017933 Stainless Steel Cable 20' X10006446 Backpacker, web 20' X20’ StrapDyna-Lock SRLPart No. 506615Dyna-Lock SRLPart No. 50620420’ Wire RopeDyna-Lock SRLPart No. 10017931(310 lbs Maximum Capacity)Backpacker SRLPart No. 50661920' Cable Dyna-Lock SRL in useDyna-Lock Backpacker SRL in useCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901039

Confined Space EquipmentConfined Space EquipmentMSA confined space entry/retrieval systems are designed for fall arrest, lifting and lowering, rescue, and work positioning applications.They incorporate an anchorage connector, fall arrest com po nent (Dyna-Lock, Dynevac II, Lynx Rescuer), a per son nel and materialshandling hoist (Lynx Hoist), and associated hard ware to rig the system for use. The systems can be used for leading edge work,maintenance and entry/retrieval from manholes, tank cars, silos, tanks, vaults, pits, vats, and other confined space applications.Lynx ® Rescuer, Field Resettable Model with Lockout• Self-Retracting Lanyard withemergency retrieval capabilities• User is able to reset device fromretrieval mode to fall arrest mode• The easiest, quickest field-resetmechanism on the marketPart No.1002301610023017• Same unit can be used in the field andfor training situations• Lock feature with key allows morecontrol over who can reset unit to fallarrest mode• Confined space entry provides fallarrest and emergency lifting andlowering• Meets ANSI Z359.1-2007, and allapplicable OSHA standards,CSA certifiedDescription50-ft (16m) Self-Retracting Lanyard with Emergency Rescuer, 3/16” diameter stainless steel line.With proper inspection, system may be reused after fall arrest and/or retrieval.95-ft (30m) Self-Retracting Lanyard with Emergency Rescuer, 3/16” diameter stainless steel line.With proper inspection, system may be reused after fall arrest and/or retrieval.Lynx RescuerPart No. 10011744Lynx ® Personnel/Material Hoist• Designed for lifting, lowering,and positioning of personneland materials• Maximum work load of 310 lbsfor personnel and 620 lbs formaterials• Anti-backlash crank handlewith a lifting/lowering speed of25 ft per minute• Integral shock absorber• Load-limiting clutch preventsoverloading of hoist• Emergency drive allowsmanual bypass of load-limitingclutch for extra lifting capacityin an emergency• Primary gear backed up by twoindependent secondary brakes• Air drive adapter enablespowered lifting/lowering withoptional air-powered driveassembly• Meets ANSI Z359.1-2007, andall applicable OSHA standardsLynx HoistPart No. 10016569Part No.Description10016569 Side mount with emergency drive and air drive adapter, galvanized wire rope, 50’10016568 Side mount with emergency drive and air drive adapter, galvanized wire rope, 105’10016683 Boom mount with emergency drive and air drive adapter, galvanized wire rope, 50’10016682 Boom mount with emergency drive and air drive adapter, galvanized wire rope, 105’506420 Lynx Hoist air drive assemblyLynx Boom Mount HoistPart No. 10016683Lynx ® Tripod• Automatic hinge lock legs• Constructed of three anodized aluminum legs and a zinc-plated carbon steel head• Legs feature 1-1/4 in. incremental adjustment with positive locking pins• Skid resistant feet with self-sharpening spikes8’ Lynx TripodPart No.10022050Part No.10022050 8’ Lynx Tripod10022051 10’ Lynx TripodDescription40Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Confined Space Entry KitsLynx ® Tripod Confined Space Entry Kit #1(P/N 10023966)Lynx RescuerMounting Bracket forTripod (P/N 506232)Lynx Rescuer 16 m(P/N 10011744)Lynx ® Tripod Confined Space Entry Kit #2(P/N 10023967)Confined Space EquipmentCon fined Space Entry Kits make it easy for you to order the Confined Space System which best suits your needs—a single part number makes ordering simple.Tripod and Davit Kits allow for great portability, and Confined Space Kits with the Lynx Rescuer allow for non-entry rescue of a confined space entrant.A training video and tripod carrying strap are included with each kit.Split MountPulley(P/N 506222)IncludesCarry Bagsfor Tripod& LynxRescuerSide MountLynx Hoist,with 50'galv. line(P/N 10016569)Pulley/BracketAssembly(P/N 506473)IncludesCarry Bagsfor Tripod &Lynx HoistLynx ® Tripod Confined Space Entry Kit #3(P/N 10023968)Pulley/BracketAssembly(P/N 506473)Side MountLynx Hoist,with 50'galv. line(P/N 10016569)Lynx RescuerMounting Bracket for Tripod(P/N 506232)Lynx Rescuer 16 m(P/N 10011744)Lynx 8’ Tripod(P/N 10022050)Lynx 8’ Tripod(P/N 10022050)IncludesCarryBagsfor Tripod,LynxRescuer& LynxHoistLynx 8’ Tripod(P/N 10022050)Part No. CSA Part No. Description10023966 10048472Lynx Tripod ConfinedSpace Entry Kit #1Part No.10023967DescriptionLynx Tripod ConfinedSpace Entry Kit #2Part No. CSA Part No. Description10023968 10048473Lynx Tripod ConfinedSpace Entry Kit #3Folding Davit ArmPart No. 506613Folding Davit basePart no. 506614Folding Davit and BaseThe Folding Davit and Base is a portableand economical anchorage connectorused where a tripod will not work.Available with a zinc-plated alloy-steelDavit Arm and your choice of zinc-platedcarbon steel or stainless steel DavitBase. This lightweight device provides a24-inch reach and 77-inches of headclearance. It pivots 360-degrees and canreadily maneuver personnel andmaterials between spaces below thedeck where it is mounted. The FoldingDavit may be carried from base to baseand installed in minutes. Meets orexceeds ANSI Z359.1, ANSI A10.32, andapplicable OSHA requirements. Mountingbrackets and pulleys sold separately.Column Davit ArmPart No. 506568Column Davit basePart No. 506492Column Davit and BaseThe Column Davit and Base are used formore permanent conditions where atripod will not work. Available with azinc-plated alloy-steel Davit Arm andzinc-plated carbon steel or stainlesssteel bases. Provides a 30 inch reachand 77 inches of head clearance. Maybe mounted to horizontal, vertical, andsubsurface appropriate anchor points.Pivots 360 degrees. Meets or exceedsapplicable OSHA requirements. Mountingbrackets and pulleys sold separately.Bosun ChairBosun ChairPart No. SSH3505017Part No.DescriptionFolding davit arm, 24” reach, 77” working height,506613 swivels to extend over work area, folds for ease oftransport and storage506614 Folding davit base506622Bracket for mounting 10m (30 ft)/ 16m (50 ft) Dyna-Lock,Dynevac, and Lynx Rescuer to Folding davit506362Bracket (same as above), except for 22m (70 ft)/ 30m (95ft) Dyna-Lock506568Column davit arm, 30” reach, 77” working height, boomarm swivels to extend over work area506492 Surface mounting receptacle for Column davit armBracket for mounting 10m (30 ft)/ 16m (50 ft) Dyna-Lock,506232 Dynevac, and Lynx Rescuer to Column davit, aluminum(requires part no. 506590)506216Bracket (same as above), except for 22m (70 ft)/ 30m (95ft) Dyna-Lock506590Bracket for mounting Dyna-Lock or Dynevac to Columndavit (requires part no. 506216 or 506232)506603 Holster to store Boom Mount Hoist when not in use506668 Vertical davit arm - Ladder Mount506667Receptacle for Vertical davit arm - Ladder Mount (boltsto ladder)Push-Pull davit - Ladder Mount, bolts to ladder and retracts415837to allow hatch cover to close, extends 60” abovehatch when extendedPart No.SSH3505017DescriptionBosun Chair, 5” x 16-1/2” padded seat,black nylon straps, 2 carabinersThe Bosun Chair is the best method to sit suspended for long durations. The padded seat ensures your comfortduring use. The adjustable web assembly ensures security. Designed to be used in conjunction with ourFull Body Harnesses, the Bosun Chair, attached to the chest D-ring, will keep the user in the upright position.Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901041

Ladder Climbing EquipmentLadder Climbing EquipmentSureClimb Temporary Cable SystemThe SureClimb Temporary Ladder Cable System is designed to provide fall protection when climbing ordescending ladders or vertical structures up to 300 ft in height. Applications include telecommunicationstowers, light poles, water towers, hydroelectric towers, stacks, and any other climbable structure.The SureClimb temporary system:• Is available in 2 versions; with an integralshock absorber, or with an energyabsorbingtop mounting bracket• Allows for quick and easy attachment toapproved ladder or structure• Includes an integral, adjustable line weight• Uses a stainless steel fall arrester(ordered separately)• Uses a 5/16” galvanized steel cable• Meets all applicable OSHA regulationsand ANSI standards• CSA certifiedSureClimb Slidercan beattached andremovedanywhere alongthe lengthof cableSureClimb Systemwith IntegralShock AbsorberPart No. SFPLS3530502Part No.DescriptionSFPLS353050 SureClimb System with integral shock absorber, 50 ft (16 m)SFPLS353100 SureClimb System with integral shock absorber, 100 ft (30 m)SFPLS353200 SureClimb System with integral shock absorber, 200 ft (60m)10040010 SureClimb Slider (fall arrester) with carabiner10036032 SureClimb Extension Davit and Base AssemblySureClimbSliderPart No.10040010SureClimb Permanent Cable SystemThe SureClimb Permanent Ladder Cable System is designed to provide fall protection when climbing ordescending ladders or vertical structures up to 300’ in height. Applications include telecommunications towers,light poles, water towers, hydroelectric towers, stacks, and any other climbable structure. The SureClimbpermanent system:• Includes energy-absorbing, galvanized steeltop and bottom mounting bracketsPart No.Description• Uses a 5/16” galvanized steel cableSFPLS350050 SureClimb System 50 ft (16 m)• Incorporates cable guides to minimize cable SFPLS350100 SureClimb System 100 ft (30 m)vibration and wearSFPLS350150 SureClimb System 150 ft (46 m)• Uses a stainless steel fall arrester (orderedseparately)SFPLS350200 SureClimb System 200 ft (61 m)• Meets all applicable OSHA regulations and 2 10040010 SureClimb Slider (fall arrester) with carabinerANSI standards• Is CSA certified and meets ANSI A14.3-1992Additional Lengths available from 20 ft. up to 300 ft. in 10 ft. incrementsSureClimb System, 50ftPart No. SFPLS350050SureClimbExtension Davit andBase AssemblyPart No. 10036032Dyna-Glide ® Climbing Protection SystemThe Dyna-Glide Climbing Protection Systems are used toprevent and/or arrest falls from heights and also enhancethe way a climber is able to perform the necessary work.Our systems can be mounted to already-installed ladders,to corners of lattice towers, and to almost any othersuit ably strong structure your crew needs to climb.• Limits total fall distance to inches• Offers components for complete rescue systems• Allows for vertical and horizontal mobility• Uses galvanized or stainless steel for corrosionresistance• Offers your choice of Ladder Rail Combination (LRC) orRail only• Provides smooth travel – there’s no binding of the fallarrester inside the rail• Uses detachable, lightweight, stainless steel andaluminum mechanism for hands-free ascent anddescent• Is CSA certified and meets ANSI A14.3-1992Tak en together, the Dyna-Glide System is designed to beinstalled without modification to the structure and can beassembled with simple hand tools.Fall Arrester (Part No. 506277)• Mechanical lockingmech a nism to reduce falldistance• Permits hands-freeascent and descent• Constructed of aluminumand stainless steel• Carabiner not includedLRC Combination(Part No. 506390)• Rungs incorporateskid-resistant surface• Can be curved orbent for yourspecific application• Constructed ofgalvanized steel• Standard length:7’ 4-3/16”• Standard width: 18”For more complete information on theDyna-Glide System, see the Dyna-GlideCatalog (Bulletin 2300-22-MC).22Part No.Description506270Straight Notched Rail, galvanized,standard length 7’ 4-3/16”506273 Rung Mount Assembly, galvanized506274 Gated top end stop, stainless steel506275Gated bottom end stop, stainlesssteel506277 Fall arrester (CSA Part No. 415752)506282Mounting base angle corner,galvanized506283 Mounting angle corner, galvanized506312 Ungated top end stop, stainless steel506329 Rail connector, galvanizedLadder/Rail Combination (LRC)506388 standoff bracket, galvanized,standard length 7’ 4-3/16”506389LRC standoff bracket, bottom,galvanized506390LRC, galvanized (CSA Part No.10006461)506391 LRC side rail connector, galvanized42Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Temporary Horizontal LifelinesHorizontal LifelinesTemporary Synthetic Hor i zon tal LifelinesDe signed for easy in stal la tion and removal, these temporary horizontal lifeline systems were created for a wide range of applications. The systemmay be mounted to any suitable 5,000 lb-rated anchorage. Both systems can be rigged using many standard components, reducing the need forspecial or “engineered” equipment.Dyna-Line ® HLL• Highly visible 12-strand red rope will not hackle andminimizes fall distance due to its low stretch properties• Available in a Single-Worker or Two-Worker system• Available in lengths up to 200 ft. System comes in a handybucket for lengths up to 60 ft.• Meets all OSHA re quire ments and ANSI A10.32 standardsSureLine HLL• Includes integral energy absorber• 5/8” black nylon kernmantle rope• Available in lengths up to 60 ft• Rated for two workers• Includes 2 cable anchor slings• Includes storage bag1221Part No.Description10013150 Dyna-Line Temporary Horizontal Lifeline for single worker, 30 ft rope10013151 Dyna-Line Temporary Horizontal Lifeline for single worker, 60 ft rope10019084 Dyna-Line Temporary Horizontal Lifeline for single worker, 100 ft rope10022826 Dyna-Line Temporary Horizontal Lifeline for single worker, 200 ft rope10013152 Dyna-Line Temporary Horizontal Lifeline for two workers, 30 ft rope*10013153 Dyna-Line Temporary Horizontal Lifeline for two workers, 60 ft rope*10019085 Dyna-Line Temporary Horizontal Lifeline for two workers, 100 ft rope*10022827 Dyna-Line Temporary Horizontal Lifeline for two workers, 200 ft rope*SHL1009035BLK SureLine Temporary Horizontal Lifeline, 35 ft black ropeSHL1009060BLK SureLine Temporary Horizontal Lifeline, 60 ft black rope* Dyna-Line Two-Worker system includes 2 polyester anchorage straps.SureLine Rope HLL Minimum Clear anceRequired Below Working SurfaceLine 1-Worker System 2-Worker SystemLength 6' Lanyard SRL 6' Lanyard SRL10 ft 14’3” 12’5” 14’7” 13’2”20 ft 15’6” 13’9” 17’ 15’30 ft 17’1” 15’2” 19’4” 16’7”40 ft 18’6” 16’5” 21’8” 18’4”50 ft 20’ 17’8” 24’2” 20’3”60 ft 21’5” 19’1” 26’ 22’2”Clearances based on Lifeline 4' above working surfaceSureLine Temporary Cable Hor i zon tal LifelineThe SureLine temporary Horizontal Lifeline is a lightweight cablesystem that is suspended between two approved anchor points toprovide worker fall protection during horizontal movement. Designed forquick and easy installation at temporary work sites, the SureLine system:• Includes an integral shock absorber• Available in 2 models, with or without turn buck le• Available in 20 ft, 40 ft, or 60 ft lengths• Rated for up to 2 people• Uses a 3/8”, 6x36 galvanized cablePart No.SureLine Temporary Horizontal Lifeline for Two WorkersPart No. SHL1009060BLK• Incorporates a combinationclamp/thimble that allows foreffortless tensioning of lifeline• Meets all OSHA requirements andANSI A10.32 standards.DescriptionSHL2009040 Steel Cable Horizontal Lifeline System with turnbuckle, 40 ft (12 m)SHL2009060 Steel Cable Horizontal Lifeline System with turnbuckle, 60 ft (18 m)SHL2009040IW Iron Worker Cable Horizontal Lifeline System without turnbuckle, 40 ft (12 m)SHL2009060IW Iron Worker Cable Horizontal Lifeline System without turnbuckle, 60 ft (18 m)Dyna-Line Temporary Horizontal Lifelinefor Two Workers Part No. 10013152Dyna-Line Rope HLL Minimum Clear anceRequired Below Working SurfaceLine 1-Worker System 2-Worker SystemLength 6' Lanyard SRL 6' Lanyard SRL10 ft 14’10” 12’5” 15’10” 13’2”20 ft 15’9” 13’8” 17’2” 14’9”30 ft 16’10” 15’1” 19’4” 16’6”40 ft 18’0” 16’4” 21’4” 18’3”50 ft 19’3” 17’6” 23’2” 20’1”60 ft 20’6” 18’9” 25’1” 22’Clearances based on Lifeline 4' above working surfaceSureLine Steel Cable SystemPart No. SHL2009040SureLine Cable HLL Minimum Clear anceRequired Below Working SurfaceLine 1-Worker System 2-Worker SystemLength 6' Lanyard SRL 6' Lanyard SRL10 ft 14’1” 12’2” 14’6” 13’2”20 ft 15’1” 13’1” 16’7” 14’8”30 ft 16’2” 14’ 19’ 16’4”40 ft 17’3” 14’9” 21’ 18’50 ft 18’4” 15’7” 22’7” 19’6”60 ft 19’5” 16’5” 24’3” 21’4”Clearances based on Lifeline 4' above working surfaceCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901043

111Horizontal LifelinesPermanent Horizontal LifelinesSkyLink ® HLL Stanchion• Accommodates two workers per system• Lightweight - weighs only 21 pounds,making it easily installed, removed, andhandled by 1 person• No tools required for installation whenusing pour-in-place anchor, making it easyto install—sets up in minutes!• Can be used as single point anchorattachment, providing fall protection forworkers while installing horizontal lifelines• Aluminum and steel constructionincreases durability to ensure longservice lifePart No.• Offers two installation methods toconcrete, a pour-in-place anchor fornew construction or concreteexpansion bolts for existingconstruction, providing versatility tomeet the requirements of your application• Folding leg stanchion design makes thestanchion easy to carry and convenientto store• Meets ANSI A10.32 and OSHArequirementsDescription10055659Skylink Stanchion, Standard model - 44” height (pour-in-placePigtail or concrete expansion anchors must be ordered separately)10055660Skylink Stanchion, SL model - 23” height (pour-in-place Pigtail or concreteexpansion anchors must be ordered separately)10055721 3.25" concrete expansion anchor with nut and washer10059805 0.5" x 12" pour in place “Pigtail” anchor with washer and vinyl cap10059806Skylink Stanchion Kit including 2 - Standard stanchions with 60'2-worker Dyna-Line 10013151 (without anchor straps) and 4 Pigtail anchors10059807Skylink Stanchion Kit including 2 - Standard stanchions with 60' Sure-Linefor Iron Workers (p/n SHL2009060IW), and 4 Pigtail anchors10059808Skylink Stanchion Kit including 2 - SL stanchions with 60' 2- workerDyna-Line (p/n 10013153 - without anchor straps) and 4 Pigtail anchors10059809Skylink Stanchion Kit including 2 - SL stanchions with 60' Sure-Linefor Iron Workers (p/n SHL2009060IW), and 4 Pigtail anchorsDesigned to supporthorizontal lifelines intwo directions(in-line with D-ring head)SL ModelPart No. 10055660Can be used as singlepoint anchor whileconnecting lifelineStandard ModelPart No. 10055659D6 HLL StanchionThe D6 HLL Stanchion is an anchorage connector used for the installation ofhorizontal lifeline systems. Designed with a jaw clamp screw, D6 HLL Stanchionsare easily installed on steel girders or base plates fitted to bridge rail ties to providea strong stable connection point for the approved horizontal lifeline system.Anchorage Bracket Also Features:• Constructed of galvanized steel• Collapsible A-frame for easy transport & storage• Meets all applicable OSHA regulations & ANSI standardsHLL quickly connects to Stanchion2Part No.SHLARD6ADescriptionD6 HLL Stanchion A-frame design, galvanized steelJaw clamp screw easily attachesto I-beam flangeD6 HLL Stanchionfor Hor i zon tal LifelinePart No. SHLARD6A44Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Horizon ® Hor i zon tal LifelineThe MSA Horizon Horizontal Lifeline anchorageconnecting system is designed for port a bil i ty,versatility, ease of installation, and ease of use.The system may be mounted to existing overheadsteel beams or to newly constructed steelstructure where overhead an chor age pointsare not available. Hor i zon tal travel throughintermediate supports is achieved withoutdisconnection of the work er’s per son al fall arrestsystem. The system may ac com mo date up to fivepersons. The unique shock absorber reducesdy nam ic forces trans mit ted to the an chor agepoints. Stanchion system may be installed on thetop or bottom flange of an I-beam.Horizontal LifelinesTypical ap pli ca tions include new construction(steel erection), in spec tion and main te nanceop er a tions, loading bays, bridges, overpasses,aircraft hangars, man u fac tur ing, pet ro chem i cal,chemical, and food pro cess ing plants. MeetsOSHA requirements.Basic Below Beam Mount Sub-SystemParts required for this system: 3 Beamgrips (Part No. depends on sizeof beam flange); 1 - 415836; 1 - 506648 (30’); 1 - 506636;1 - 506563; 1 - 506662; 2 - 506637I-BeamHLL Shock Absorberwith TurnbuckleP/N 415836BeamgripPart No. depends on flange width andthickness, see part no. list below.LifelineP/N 506648 -3/8” Wire Rope30’ LengthBypassP/N 506636Open Wedge Socketwith Wire Rope ClipP/N 506563End FittingP/N 506637Turnbuckle with PlateP/N 506662Optional - recommended for lengths over 50’Part No.Description506682 Beamgrip for beams with flange width: 3.94” to 5.64”, flange thickness: .205” to .659”415171 Beamgrip for beams with flange width: 5.525” to 8.07”, flange thickness: .36” to 1.09”415172 Beamgrip for beams with flange width: 8.06” to 10.475”, flange thickness: .56” to .935”415173 Beamgrip for beams with flange width: 10.265” to 12.8”, flange thickness: .605” to 1.25”415836 Horizontal lifeline shock absorber506563 3/8” open wedge socket506636 Beamgrip bypass fitting506637 Beamgrip end fitting506648 3/8” wire rope, galvanized, length must be specified at the time of order506662 12” turn buckle with plate506663 Snatch block pulley for 3/8” wire rope506254 for 1/2” wire rope506255 for 5/8” wire rope! WARNINGOSHA regulations state “Horizontal Life lineSystems shall be designed, installed and usedun der su per vi sion of a qual i fied person, as partof a complete fall ar rest system, which main tainsa safe ty fac tor of at least two.” A qualifiedperson is de fined as “one with a rec og nizeddegree or professional certificate and/orextensive knowl edge and ex pe ri ence in thesub ject field, who is capable of de sign, analysis,evaluation and specifications in the sub jectwork, project or prod uct.” MSA can provide aqual i fied per son to design and install a HorizontalLifeline System. Con tact the MSA En gi neer ingService De part ment.Below Beam HLL KitsChoose from 4 kits.30 ft kits include• 2 beamgrips (choose fromP/N 415171 or P/N 415172)• 2 end fittings (P/N 506637)• Shock absorber (P/N 415836)• Lifeline (P/N 506648 - 30 ft)• Open wedge socket (P/N 506563)• Turnbuckle (P/N 506662)60 ft kits include• 3 beamgrips (choose fromP/N 415171 or P/N 415172)• 2 end fittings (P/N 506637)• Shock absorber (P/N 415836)• Lifeline (P/N 506648 - 60 ft)• Open wedge socket (P/N 506563)• Turnbuckle (P/N 506662)• Manual Bypass (P/N 506636)Part No.10030270100302711003027210030273DescriptionHLL Kit #1, 30’ Below Beam system, for I-beamswith flange width 5.525” 8.07” and flange thickness .36” 1.09”HLL Kit #2, 60’ Below Beam system, for I-beamswith flange width 5.525” 8.07” and flange thickness .36” 1.09”HLL Kit #3, 30’ Below Beam system, for I-beamswith flange width 8.06” 10.475” and flange thickness .56” .935”HLL Kit #4, 60’ Below Beam system, for I-beamswith flange width 8.06” 10.475” and flange thickness .56” .935”Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010 45

Horizontal LifelinesBasic Stanchion Mount Sub-SystemParts required for this system:(5) Beamgrips part no. dependson size of Beam Flange(2) 506646(1) 506647(1) 506648 – 30’(1) 506645(1) 415836(3) 506665(1) 506649Cable ClampP/N 506645Wire Rope ClipP/N 506649End StanchionP/N 506646LifelineP/N 506648 - 3/8” Wire Rope, 30’ LengthIntermediateStanchion withBypassP/N 506647HLL ShockAbsorber withTurnbuckleP/N 415836BeamgripPart No. depends on flange width and thickness, see part no. list below.Part No.Description506682 Beamgrip for beams with flange width: 3.94” to 5.64” flange thickness: .205” to .659”415171 Beamgrip for beams with flange width: 5.525” to 8.07” flange thickness: .36” to 1.09”415172 Beamgrip for beams with flange width: 8.06” to 10.475” flange thickness: .56” to .935”415173 Beamgrip for beams with flange width: 10.265” to 12.8” flange thickness: .605” to 1.25”415836 Horizontal lifeline shock absorber506645 Cable clamp506646 Beamgrip end stanchion506647 Beamgrip bypass stanchion506648 3/8” wire rope*, 30’, galvanized506649 Wire rope clip 3/8”506663 Snatch block pulley for 3/8” wire rope506254 for 1/2” wire rope506255 for 5/8” wire rope506665 Beamgrip stanchion insertStanchion Insert - P/N 506665Horizon HLL Minimum Clear anceRequired Below Working SurfaceLine 1-Worker System 2-Worker SystemLength 6' Lanyard SRL 6' Lanyard SRL10 ft 13’4” 5’0” 13’11” 5’4”20 ft 14’4” 5’6” 14’10” 6’3”30 ft 15’0” 6’1” 15’7” 6’9”40 ft 15’9” 6’9” 16’3” 7’5”50 ft 16’4” 7’3” 16’9” 8’0”60 ft 16’9” 7’9” 17’5” 8’6”70 ft 17’5” 8’3” 17’10” 9’0”80 ft 17’11” 8’9” 18’5” 9’6”90 ft 18’4” 9’3” 18’11” 10’0”100 ft 18’9” 9’7” 19’5” 10’5”Stanchion HLL KitsChoose from 4 kits.30 ft kits include• 4 beamgrips (choose fromP/N 415171 or P/N 415172)• 2 end stanchions (P/N 506646)• 2 stanchion inserts (P/N 506665)• Lifeline (P/N 506648 - 30 ft)• Wire rope clip (P/N 506649)• Cable clamp (P/N 506645)• Shock absorber with turnbuckle(P/N 415836)60 ft kits include• 5 beamgrips (choose fromP/N 415171 or P/N 415172)• 2 end stanchions (P/N 506646)• 3 stanchion inserts (P/N 506665)• Lifeline (P/N 506648 - 60 ft)• Wire rope clip (P/N 506649)• Cable clamp (P/N 506645)• Shock absorber with turnbuckle(P/N 415836)• Intermediate Stanchion withManual Bypass (P/N 506647)Part No.10030274100302751003027610030277DescriptionHLL Kit #5, 30’ Stanchion system, for I-beamswith flange width 5.525” 8.07” and flange thickness .36” 1.09”HLL Kit #6, 60’ Stanchion system, for I-beamswith flange width 5.525” 8.07” and flange thickness .36” 1.09”HLL Kit #7, 30’ Stanchion system, for I-beamswith flange width 8.06” 10.475” and flange thickness .56” .935”HLL Kit #8, 60’ Stanchion system, for I-beamswith flange width 8.06” 10.475” and flange thickness .56” .935”HLL Kit Component PartsHorizontal MountedBeamgripOpen Wedge with SocketBeamgrip withattached End FittingByPassTurnbuckle with PlateEnd FittingStanchionInsertHLL Shock Absorber with TurnbuckleVertical MountedBeamgrip46Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

FP Rescue Pulleys & ComponentsSuretyMan PulleysDesigned to meet the rigorous standards of the professional rescuer. Built with high grade aluminum sideplates and sheaves, oilite bearings, stainless steel bolts, washers, and lock nuts make these some of the bestpulleys available. The aluminum side plates swivel and rotate to allow the pulley to be attached anywherealong the rope. The top holes of the side plates are large enough to accept three carabiners. Contain Prusikdesign (squared corners of the side plates) to provide rope security with a Prusik hitch. Pulleys accept 3/8”(1cm) to 1/2” (1.3 cm) static kernmantle ropes. Side plates are powder coated. Strength: 2” (5 cm) Double 8,100lb (36 kN), 4” (10 cm) Double 11,200 lb (49 kN).SuretyMan Mini Knot Passing PulleyThe Suretyman Mini Knot Passing Pulley was designed for the professional rescue team concerned with sizeand weight. The Suretyman Mini Knot Passing Pulley features:• Ample room for the passing of knots • Locking pin• Size: 9-1/2” (24 cm) tall, 4” (10 cm) wide, 3” (7.6 cm) deep • Weight: 1.9 lb (.89 kg)• Aluminum sheave • Half the size and weight of some of the(that will not score like some of the plastic sheaves)larger, bulkier knot passing pulleysSuretyMan Edge RollerThe best way to protect your rope from sharp edges and reduce rope friction. High quality construction. The6” x 10” (15.3 cm x 24.4 cm) base is rubber covered to reduce slippage. The bottom and side plate featureattachment holes for ease of security in any situation. Added slots in the base plate accept tube webbing forsecurity. Two edge rollers are required (sold separately). Two quick links are required (sold separately). Edgeroller is 4” (10 cm) tall. Weight: 2.8 lb (1.3 kg).SuretyMan Q-Eight• Ears/cleat are positioned to make tie off very easy and safe• Ears/cleat still prevent larks footing (girth hitch)• Designed for 7/16” (11 mm) diameter rope(will work with 1/2” (12 mm) diameter rope)• Aluminum, anodized gold• Strength 13,000 lbs (58 kN)• Weight 8 oz (.24 kg)SuretyMan Rescue Eight• Designed for rope diameters from 7/16” (11 mm) to 5/8” (16 mm) • Available in aluminum or steel• Strength 6,720 lb (30 kN) • Weight 1.5 lb (675 g)• Designed for the fire service, rescue, and police tactical operationsSuretyMan Rigging PlatesStealth Riggin Plate: Anchor on the point and the wings will rotate toward the load for a straighter line of pull.Material aluminum. Weight: .46 lb (250g). Strength: 11,000 lb (48 kN). Color: TealStretcher Rigging Plate: Designed to unclutter and organize litter rigging points, reducing the chance of error.Material aluminum. Weight: .74 lb (330g). Strength: 12,200 lb (54 kN). Color: TealRescue Carabiner• Traditional large “D” design• Developed for fire and rescue communities• Manual locking• Certified to meet NFPA 1993-1995, Class “G”• Carbon steel, zinc-plated• Strength 12,364 lbs (55 kN)• Weight 11 oz (311g)• Gate opening 1.2” (32mm)Part No.DescriptionSPPPU8708 SuretyMan Pulley, 2” (5 cm) double, Std/Prusik, orange, aluminum, weight: .83 lb (375 g)SPPPU8710 SuretyMan Pulley, 4” (10 cm) single, Std/Prusik, yellow, aluminum, weight: 1.2 lb (545 g)SPPPU8717 SuretyMan Pulley, 4” (10 cm) double, Std/Prusik, orange, aluminum, weight: 1.8 lb (840 g)SPPPU8720 SuretyMan Mini Knot Passing Pulley, yellow, weight: 1.9 lb (.89 kg)SPPRL4000 SuretyMan Edge Roller, aluminum, weight: 2.8 lb (1.3 kg) - [two required]SMI420560 Quick Link 5/16” (8 mm) for use with Suretyman Edge Roller - [two required]SRSF5077 SuretyMan Rescue Eight, aluminumSRSFFE2120 SuretyMan Q-EightSRSPR5990 SuretyMan Stealth Rigging Plate, aluminum, tealSRSPR5980 SuretyMan Stretcher Rigging Plate, aluminum, tealSRCC641 Carabiner, 1.2” (32mm) gate, steelRescue EquipmentPart No.SPPRL4000Part No.SMI420560Part No.SPPPU8708SuretyMan RescueEight, SteelPart No. SRSF5045Part No.SPPPU8710Part No.SPPPU8720SuretyMan Q-EightPart No.SRSFFE2120Stealth Rigging PlatePart No. SRSPR5990Stretcher Rigging PlatePart No. SRSPR5980Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901047

Rescue EquipmentFP Rescue RopesStat ic Kernmantle RopesThese ropes are 100% permanentsolution dyed color with contrastingmarker stripe. Superior flexibility andknotability, provided by a uniquedouble-twist cable core construction,gives superior resistance to abrasionthat is up to four times greater thanother static kernmantle ropes. These ropes are designed with load absorbingcapabilities to provide additional safety in the event a dynamic force isapplied.Prusik & Accessory CordsPrusik cords have the same high quality and long wear design as rescueropes. Size selection should be based upon diameter of the main line. Theflexible cord is both strong and highly resistant to abrasion. Prusik cords andaccessory cords are identical.1. 2.Tying aThree- WrapPrusik HitchPart No.DescriptionSRP508760050 7/16” (11 mm), nylon, 6,500 lb (2,948 kg), black, 50'SRP504860SL050 1/2” (12 mm), nylon, 9,100 lb (4,128 kg), white/orange tracer, 50'SRP508960050 5/8” (16 mm), nylon, 11,400 lb (5,171 kg), black, 50'SRP530961050 1/2" (12 mm) polyester, 9,100 lb (4,128 kg), red, 50'SRP510660SL050 3/8" (10 mm), nylon, 5,000 lb (2,269 kg), white/blue tracer, 50'SRP544000050 7/16” (11 mm), nylon, 6,500 lb (2,722 kg), olive, 50'SRP504866SL050 1/2" (12 mm), nylon, 9,000 lb (4,083 kg), white/blue tracer, 50'SRP504863SL050 1/2" (12 mm), nylon, 9,000 lb (4,083 kg), red/white tracer, 50'Additional lengths are available in 1-foot increments.Rope Storage BagsTying a Two-WrapPrusik HitchPart No.3.DescriptionSRP5008608 mm Accessory Cord, nylon. Use with 1/2”-5/8”(1.3cm-1.6cm) main line, black, 3,100 lb (1,406 kg)SRP5009009 mm Accessory Cord, nylon. Use with 1/2”-5/8”(1.3cm-1.6cm) main line, 3,600 lb (1,632 kg)SRP500500050 5 mm Accessory Cord, nylon, 1,275 lb (578 kg) strength, 50'SRP50205500505.5 mm Titian Cord, Sprectra Core, nylon,4,500 lb (2,042 kg) strength, 50'SRP5007000507 mm Accessory Cord, nylon. Use with 3/8”-1/2”(1cm-1.3cm) main line, red, 2,600 lb (1,179 kg), 50'Rope Storage Bags are made of tough Cordura nylon fabric. Features include a drawstring top, handle/shoulder strap, and carabiner loops at top and bottom.In the bottom of the bag there is an inside loop for the end of the rope, or it can pass through the bottom grommet. Available in orange and black colors.Part No.SRB430101SRB430105SRB430201SRB430205SRB430301SRB430305SRB430601SRB430605DescriptionRope Bag #1, orange, holds 120-ft / 1/2” (36.6m / 12 mm) ropeRope Bag #1, black, holds 120-ft / 1/2” (36.6m / 12 mm) ropeRope Bag #2, orange, holds 200-ft / 1/2” (60.1m / 12 mm) ropeRope Bag #2, black, holds 200-ft / 1/2” (60.1m / 12 mm) ropeRope Bag #3, orange, holds 300-ft / 1/2” (91.4m / 12 mm) ropeRope Bag #3, black, holds 300-ft / 1/2” (91.4m / 12 mm) ropeRope Bag #6, orange, holds 600-ft / 1/2” (182.8m / 12 mm) ropeRope Bag #6, black, holds 600-ft / 1/2” (182.8m / 12 mm) ropeRope Bag #1Part No. SRB430105 Rope Bag #2Part No. SRB430201FP Rescue TripodSure-Strong TripodsSure-Strong Work WinchPart No. SCE1074411200Sure-Strong Tripods feature:• Adjustable aluminum legs• Two forged steel anchor eyes in head assembly• Head assembly prevents unintentional collapse of tripod• Legs adjust and lock individually to accommodate variableanchor heights, uneven ground, and compact storage• Leg security strap prevents legs from spreading in the event ofex ces sive loading• Available with a cordura nylon storage bag• Rated for 2 people with a working load of 1,100 lbsPart No.SCE107007SCE107010HDSCE1074411200DescriptionSure-Strong 7-ft (2m) tripod, aluminum, 10,000 lb (48 kN)Sure-Strong 10-ft (3m) tripod, aluminum, 10,000 lb (48 kN)Sure-Strong work winch, 200-ft (61m) galvanized wire rope, withbracket (compatible with Lynx Tripod and Sure-Strong Tripod)Sure-Strong TripodPart No. SCE107007Alu mi num Ex trud ed HeadAs sem bly (2) ForgedSteel AnchorsPowder-coatedPaint FinishLeg Security Strapwith AdjustableFriction BuckleCollapsed StorageSize 10” x 61”(25cm x 152 cm)Total Weight:43.5 lbs (20 kg)Self LockingHead AssemblyLocking Legs Adjust in5” (14cm) incrementsNon SlipRubberPads onFeet48Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

FP Rescue KitsSuretyMan Rescue Utility SystemThe SuretyMan Rescue Utility System incorporates all the features professionalshave come to expect from a first class rescue system. The system is primarily usedfor raising and lowering people or equipment in rescue and industrial work accessand is ideal for confined space ap pli ca tions.The SuretyMan Rescue Utility System features:• Pulleys equipped with a built-in anti-reversing lock• Only a 10 lb force is required to hold a 220-lb (90 kg) load• SuretyMan ascender attached to both the op er at ing rope and the user via asecuring rope— if the operating rope accidentally releases, the ascenderautomatically stops the descent• Rapid deployment• Virtually maintenance free• Rated for 2-person load• Compact and light weight with a standard system weight of 17 lb (7.7 kg)• Versatile for rescue & access• Multi-purpose ascent or descent• Rated capacity of 600 lb (272 kg) for personnel and materials• Standard rope length of 200 ft (66m) with a maximum rope length of 800 ft (267m)SuretyManRescue Utility SystemPart No. SRS15200StorageBagRescue EquipmentCarabinerAnti-ReversingDouble PulleysRight-handedAscender(standard)CarabinerSecuring Ropewith Carabiner2Part No.SRS15200PLEASE NOTE:DescriptionSuretyMan Rescue Utility System (200’ length)Due to a 4:1 mechanical advantage, the user should order the Rescue Utility System with 4times the length of rope necessary for their application. For example, the 200’ system listedabove provides a 50’ working length. A 800’ system provides a 200’ working length.Left-handedAscender(optional)SuretyMan7/16" (11mm)Static Kernmantle RopeFall Protection Rescue KitThe Fall Protection Rescue kit is designed to be an “out of the bag” rescuesystem. This kit combines a remote hook and extension pole with a rescueutility system. The remote hook and extension pole allows for remoteattachment of a rescue line to a victim. The Rescue Utility System allows arescuer to raise or lower the victim to safety. This kit should be used with aback-up system (not included).Fall Protection Rescue Kit includes:• Adjustable Pole, 6 ft (1.8m) to 12 ft (3.6m) (P/N - SFP675009)• Pole Adapter (P/N - SCE109001) converts pole to hold remote hook• Remote Hook (P/N - SRCA401) for remote attachment• Storage Bag (P/N - SRB675009) for pole and remote hook• Rescue Utility System (P/N - SRS15200) - raising and lowering system with a4:1 mechanical advantagePart No.10030025 Fall Protection Rescue KitDescriptionPLEASE NOTE:Due to a 4:1 mechanical advantage, the user should order the RescueUtility System with 4 times the length of rope necessary for theirapplication. See page 78 for more information.Fall Protection Rescue KitPart No. 10030025AdjustablePoleStorageBagPoleAdapterRemote HookRescue Utility SystemCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010 49

Rescue EquipmentBasic High Angle Rescue KitsThe Basic High Angle Rescue Kits were designed for theFire Department planning to assemble a high anglerescue team. A complete high angle rescue systemconsists of two kits: a Belay System Kit, and aRaising/Lowering System Kit.Belay System KitPart No. 1003002353” 8 mm Accessory CordsStorage BagThe Belay System Kit includes:• 3 large “D” shaped rescue carabiners(P/N SRCC641) - NFPA approved Class G• 200-ft (61m) 1/2” rope, orange and white(P/N - SRP504860SL) - NFPA approved• 33-ft (10m) 9mm accessory cord(P/N - SRP500900) for makingload- release hitch• 65” (1.65m) 8mm accessory cord & 53” (1.35m)accessory cord (P/N - SRP500860) make-upthe tandem Prusiks• 6-ft (1.8m) Suretyman anchorage sling(P/N - SFP2267406)• #3 rope bag, orange (P/N - SRB430301)1/2” RopeAnchorage SlingCarabinersThe Raising/Lowering System Kit includes:• 6 large “D” shaped rescue carabiners(P/N - SRCA641) - NFPA approved Class G• Stealth rigging plate (P/N - SRSPR5990)• 200-ft (61m) 1/2” rope, red (P/N - SRP504863SL) -NFPA approved• 33-ft (10m) 9mm accessory cord(P/N - SRP500900) for making load-release hitch• 65” (1.65m) 8mm accessory cord & 53” (1.35m)accessory cord (P/N - SRP500860) make-upthe tandem Prusiks• 53” (1.35m) 8mm accessory cord (P/N - SRP500860) forcreating the Prusik for connecting the raising system• 2 Single Pulleys, 4” (100mm) (P/N - SPPPU8710) -Prusik minding pulleys• Brake Bar Rack (P/N SRS14001) - lowering device isNFPA approved• 6-ft (1.8m) Suretyman anchorage sling(P/N - SFP2267406)• #3 rope bag, black (P/N - SRB430305)1/2” RopeBrake Bar RackStealth Rigging PlateAnchorage Sling9 mm Accessory Cord 65” 8 mm Accessory CordsPulleysRaising/Lowering System KitPart No. 10030024Storage BagCarabinersPart No.Description10030023 Belay System Kit10030024 Raising/Lowering System Kit9 mm Accessory Cord8 mm Accessory Cords50Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Rescue EquipmentEmer gen cy Rescue Bag SystemThe Emergency Rescue Bag System is designed for rescue onelectrical and communication towers. Developed for use in re stric tiveenvironments, this ex treme ly light weight sys tem was primarilydesigned for tower rescue; however, the system can be used toperform rescues on almost any ver ti cal struc ture. The EmergencyRescue Bag System consists of a pre-rigged lowering System thatcomes in a va ri ety of lengths. The users of this product must receivetraining by an approved trainer.Emergency RescueBag SystemPart No.SRS323150Part No.SRS323150SRS323300DescriptionEmergency Rescue Bag System, 150-ft (45 m)working lengthEmergency Rescue Bag System, 300-ft (90 m)working lengthPLEASE NOTE:Due to a 2:1 mechanical ad van tage, the user should order theEmergency Rescue Bag System with twice the length of rope nec es saryfor their ap pli ca tion. For ex am ple, the SRS323150 uses 300’ of rope toachieve a 150’ working length. The max i mum sys tem avail able pro videsa 400’ working length with 800’ of rope.Confined Space/Head First Extraction SystemThe Confined Space/Head First Extraction System (HFES) is a specializedrescue product designed for those extreme cases where the rescuer has noother option, but to be lowered head first into a confined space to perform arescue. These cases are rare, but can happen when someone has fallen intoa restrictive confined space such as a well or drain system. The systemallows the rescuer to be lowered comfortably into a confined space headfirst, harness the victim, and raise both victim and rescuer out of theconfined space. This small, compact sytem can be used with any confinedspace retrieval equipment such as tripods and davits.Rescue SystemRescue SystemDCACBThe HFES consists of the following components:• Adjustable Lifting Strap (A)• Adjustable Victim Strap (B)• 1 Pair of Ankle Harnesses (C)• 2 Carabiners (D)• Storage Bag (E)Strength: 5,000 lb (22 kN)Weight Approx: 2 lb (0.9 kg)DDPart No.SRS3100DescriptionConfined space head first extraction systemBEABucket Truck Evacuation KitThe Bucket Truck Evacuation Kit was created to provide all necessaryequipment to allow a worker to safely evacuate an aerial bucket thathas become inoperative. The kit includes:• #2 Rope Bag (P/N - SRB430205)• 10-ft Synthetic Ladder with Swivel Snaphook P/N - SCE405010)• Boom Anchor Strap (P/N - SSB22040)• Anthron system (P/N - SDC726075) which includes Anthron device,Carabiners (2), 75-ft (22m) 7/16” ropePart No.SKITSMT001DescriptionBucket Truck Evacuation KitCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010 51

Rescue EquipmentFirefighters Escape KitThe Firefiighters Escape Kit was created as a tool for emergency egress for a fire fighter trapped in anupper floor of a building. This kit is lightweight and easy to use.Firefighters Escape Kit includes:• 2 Suretyman aluminum auto-locking carabiners (P/N - SRCA853)• 60 ft (18.3 m) 9mm rope (P/N - SRP500900)• Mini Q-Eight• Small stuff sackCarabinerFirefighter Escape KitPart No. 100300269 mm RopePart No.SRS3100Firefighter’s Escape KitDescriptionStuff SackMini Q-EightSKED Basic Rescue SystemThe best solution for confined space, high angle or technical rescue, and traditionalland-based applications, the Sked stretcher is a revolutionary design which providesoutstanding patient protection and security. The Sked stretcher comes equipped forhorizontal hoisting by helicopter or vertical hoisting in caves or industrial confinedspaces. When the patient is secured, the stretcher becomes rigid. The durable plasticprovides protection for the patient while allowing extrication through the mostdemanding confined spaces. The stretcher is rolled for storage in a tough cordurabackpack which is included in the system. The system ships at 19 lb (8.6 kg) and comescomplete for most applications.Each Sked Basic Rescue System comes complete with:• Sked StretcherSked Basic Rescue System• Cordura backpack/towing harnessPart No. SRSSK200• Horizontal lift slings• Vertical lift sling• Tow strap• Removable webbing handlesPart No.SRSSK200DescriptionSked Basic Rescue System, International orangeRescue Pole/Remote HookThe Rescue Pole/Remote Hook is designed as a rescue tool for the retrieval of a worker suspended in a fall arrestsystem or for remote rescue access. In most cases, the need for the rescuer to go to the fallen worker (victim) islimited. The Rescue Pole can be used in a wide variety of rescue applications and will serve as an excellent toolto help perform a safer, efficient rescue. The system consists of an adjustable fiberglass pole, pole adapter, andremote hook. A nylon storage bag is optional.Part No.SFP675009SFP675012SRCA401SCE109001SCE109003SRB675009DescriptionAdjustable pole, fiberglass 6 ft (1.8m) to 12 ft (3.6m)Adjustable pole, fiberglass 8 ft (2.4m) to 24 ft (7.3m)Remote hook, aluminum, with web slingPole adapter, aluminum/rubberPole adapter, 6 ft (1.8m), aluminum/rubberStorage bag for FP675-009Attaching remote hook to D-ringPole AdapterPart No. SCE109001Adjustable PolePart No. SFP675009Remote HookPart No. SRCA401Storage BagPart No. SRB67500952Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

FP Rescue ProductsRescue Equipment/General AccessoriesRescue CradlesThe Rescue Cradle is available in two model types.The SRH30701 model isdesigned to allow easy placement on a person. Equipped with 4” (10 cm)polyester webbing and 4 - 3” (7.6 cm) D-rings. One size fits all.The Rescue Cradle, model SRH30703, is designed to be very similar to theSRH30701 model, except it is constructed with 1 - 3/4” (4.4 cm) nylon webbing,2” (5 cm) attachment ring, and an elastic shoulder strap.Rescue CradlePart No.SRH30701Part No.SRH30701SRH30703DescriptionRescue Cradle, 4 D-rings, 4” (10 cm) polyester webbingRescue Cradle, 2” attachment ring, 1-3/4” (4.45 cm) nylon webbingRescue LaddersOur Rescue Ladders has synthetic rope with reinforced fi ber glass rungs.Applications include: confined space access, the at ri cal stage rigging, mineaccess, and many others. Our steel cable ladder meets and exceeds theESTA (Entertainment Services and Technology Association) lad der standardfor stage work and theatrical rigging.Part No.DescriptionSCE400020 Rescue Ladder, synthetic rope, 20 ft (6.1 m)Rescue CradlePart No.SRH30703Rescue EtrierEtrier is French for a set of ascending web stirrups sewn or tied together.The Etrier is useful for stretcher tendering and other vertical activitiesin clud ing getting over difficult edges.The six-foot loops are reinforced/stiffened for easier foot placement and abra sion resistance.Length: 7 ft (2.1 m). Weight: 9 oz (280 g).Part No.DescriptionSRS3200 Rescue Etrier, 1” web, 7 ft (2.1 m)General AccessoriesHands-off Chisel GripThe Hands-Off Chisel Grip keeps hands away from the point of contact. The Hands-OffChisel Grip is ergonomically designed to match the specific shape of the human handfor a comfortable and firm grip. Ad di tion al fea tures of this mod ern de sign in clude:• Per mits fast er, saf er, more ac cu rate work• Easy ad just ment to hold a va ri ety of chis els and stakes up to 1” in diameter• Vibration-ab sorb ing handleHands-Off Chisel Grip• Eases awkward hand positioningPart No. 10040018• Economical• Spark resistantRescue LadderSynthetic RopePart No.SCE4000020Rescue EtrierPart No.SRS32001Part No.Description10040018 Hands-Off Chisel GripErgonomic Tool Holders• Holds wrenches, chisels, etc.• Vibration-absorbing design• Attach to broom handles and mops for better grip• Eases awkward hand positioning18” Tool HolderPart No. 50700522Part No.Description507005 Tool Holder, 18”507006 Tool Holder, spark resistant, 18”Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010 53

MSA Custom SolutionsMSA Custom SolutionsEvery business is unique, and MSA recognizesthat YOUR Fall Protection systems need tobe custom-designed and installed to meetYOUR needs.To help you, we have carefully selected andtrained specially qualified contractors, whocan personally work with YOU to deliverexactly the services your hazardoussituations demand.These MSA Fall Protection System Integratorsare independent organizations throughoutNorth America whose local specialists canprovide one or more customized MSA FallProtection solutions for your business.Your MSA System Integrators will combinetheir experience and knowledge of practicalapplications with MSA Fall Protection productsto meet your specific needs for any industry,including forestry, construction, oil & gas,petrochemical, mining, manufacturing, utilities,entertainment, and transportation.Whether you choose complete turnkeyservices or individual services, you'llreceive experienced application and design,fabrication, and installation of whateverMSA Fall Protection systems you need.Engineering ServicesRegistered professional engineers will visit yoursite to analyze and determine the scope of work.Then they will design and draft engineeringdrawings, and later, follow up with a constructionsite review to ensure that your Fall Protectionsystem has been installed as designed.InstallationFactory-trained and certified installationtechnicians will execute the design specificationsand carry out the manufacturer's instructions.Technicians can also inspect and re-certify anexisting MSA Fall Protection system.FabricationKnowledgeable fabricators will build all structuralcomponents that are required to supportyour primary MSA Fall Protection system, fromsimply connecting brackets that attach to yourbuilding columns or beams, to assembling completefree-standing support structures. You can trust thatyour fabricated components will comply with allapplicable governing codes and standards.TrainingHigh quality training programs at a reasonable costwill be tailored to the unique issues of your industryand installation. MSA's commitment to increasingdemands for technical training in Fall Protection,post-fall retrieval, and rescue will be fulfilled atyour facility.Why Choose MSA Custom Solutions?• You get the broadest product range, to ensure the bestpossible fall hazard solution for your specific application.• MSA System Integrators work directly for you and areresponsive to your project requirements.• MSA System Integrators offer cost-effective servicesdirect to you, the MSA customer.• You will benefit from dedicated regional SystemIntegrators as well as nationally prominent organizationsthat specialize in particular industry applications.How?It's easy! To receive your quotation from MSA CUSTOM SOLUTIONS:1. Contact your local MSA distributor, MSA Sales Associate,or call our MSA Customer Service at 1-800-672-2222.2. Your request will be forwarded to the MSA System Integrator,who will contact you about your project's specific requirements.3. You will receive a written estimate for your system.For more information call MSA Customer Service Centerat 1-800-672-2222 and request the Custom Solutions Catalog(Bulletin #2300-100).54Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Sure-Rail Horizontal LifelineThe Sure-Rail system is a rigid rail horizontal lifeline system typically used in areas when there is limited clearance below theworking surface. The Sure-Rail system is available in many standard configurations, but can also be customized to fit yourapplication. The Sure-Rail system provides:• Ease of movement (smooth trolley action)• Little or no deflection in the rail limits fall distance and fall arrest forces on the body• Support for up to 4 workers on the system simultaneously.• Meets all applicable OSHA regulationsSure-RSure-RaCaraRailff CollarMSA Custom SolutionsThe Sure-Rail horizontal rail systemis installed by attachment tointermediate support members thatact to stabilize the rail duringnormal flex and movement of thebuilding structure The intermediatesupports are fabricated from hollowstructural shapes (HSS) The HSSsupports are connected to the railby welded tabs at five-foot (1 5 m)intervals The design of the HSSsupports are the responsibility of aqualified engineer familiar with theproject and manufacturer'srequirementsSure-Rail is an engineered systemand must be designed, installed,and used under the supervision of aqualified structural engineer, asrequired by US Federal OSHA andCanadian Provincial regulationsSure-Rail Trolley20’ CDyna-LoSure-Rail Bolte-Rail TrolleyTop ViewSide ViewLatchways Mansafe ® Horizontal LifelineThe Latchways ManSafe Horizontal Lifeline systems are designed to operate horizontally, around corners,and up or down inclines to offer continuous worker protection regardless of the building type or structure.ManSafe Horizontal Lifeline features include:• Unsurpassed system flexibility• Ability to support up to 6 workers per lifeline• Unique Latchways Transfastener rotates freely through intermediate supportsto enable hands-free operationCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010 55

Calculating Total Fall DistanceCalculating Total Fall DistanceKnowing how to calculate Total Fall Distance is justas important as selecting the proper harness,lanyard, anchorage connector, and anchorage pointfor the specific task to be performed. Total FallDistance (TFD) is defined as the sum of FreefallDistance (FFD), Deceleration Distance (DD), HarnessEffects (HEFF), and Vertical Elongation (VEL). It is alsowise to include a Safety Factor (SF) of at least onefoot in the formula. Total Fall Distance can becalculated using the following formula:TFD = FFD + DD + HEFF + VEL + SFBefore we can begin to calculate Total Fall Distance,we first need to define the variables in the formulaabove.Freefall Distance (FFD): The vertical distance aworker travels between the onset of a fall until justprior to the point where the Fall Arrest System beginsto arrest the fall. Federal OSHA limits this distance to6’ or less. To keep FFD to a minimum, you shouldalways try to keep your anchor point as far above theback D-ring of the harness as possible.Deceleration Distance (DD): The vertical distance aworker travels between the activation of the FallArrest System and final fall arrest. Federal OSHAlimits this distance to 3.5’ or less. The DD that eachshock-absorbing fall arrest device will permit istypically stated on the product label.Harness Effects (HEFF): The stretch of a harnessduring fall ar rest. This is typically one foot or less fora properly-fitted harness. However, some harnessesuse elastic-type webbing that can increase theharness effects to two feet or more.Vertical Elongation (VEL): The stretch in the lifeline ofthe Personal Fall Arrest System. Vertical Elongation ismeasured on the part of the lifeline that is undertension during deceleration and final fall arrest. Thisvariable will change drastically depending upon thetype of Fall Arrest System you are using. For example,most shock-absorbing lanyards are designed to havea maximum deceleration distance of 3.5’, whichincludes the vertical elongation of the lanyard.However, if you are using a rope grab system or ahorizontal lifeline, vertical elongation must becalculated based on the stretch of the vertical orhorizontal lifelines in those systems. You will need tocheck the specific manufacturers’ product for exactstretch percentages.Safety Factor (SF): An additional factor of safety toensure that you have the required clearance belowyour work ng surface. This variable should be at leastone foot, but can reflect any number with which youfeel comfortable.For illustration purposes, we will use the followingequipment:• Full Body Harness (non-elastic)• 6’ Shock-Absorbing Lanyard• Fixed, Rigid Anchorage Connector (such as aD-Plate bolted to a structural I-beam)In Figure 1, we see a worker with a 6’ Shock-Absorbing Lanyard on an elevated platform. In thisexample, let’s assume that his attachment point is 2’above the back D-ring of the harness. For every 1’ thelanyard attachment point is above the harness backD-ring, 1’ is deducted from the Freefall Distance. Forevery 1’ that the lanyard attachment point is belowthe harness back D-ring, 1’ is added to the FreefallDistance (see Table 1). In this scenario, if the workerfalls, the Freefall Distance (FFD) will equal 4’ sincethe lanyard attachment point is 2’ above theback D-ring of the harness. So, our formula lookslike this:TFD = 4’ + DD + HEFF + VEL + SFThe next variable to consider is DecelerationDistance (DD). Federal OSHA requires that thisdistance not exceed 3.5’. Since all manufacturers’product is slightly different, you should read the labelon the product you intend to use to determine themaximum deceleration distance of that product.When calculating Total Fall Distance, the maximumdeceleration distance that a product will permitshould always be used. In our example, the maximumdeceleration distance would be 3.5’.TFD = 4’ + 3.5’ + HEFF + VEL + SFThe Harness Effects variable is relatively constant atless than one foot. This will vary slightly due to theFigure 1.adjustment of the harness, so we generally use onefoot to account for these slight differences. However,elastic-type harnesses can have more than one footof stretch, possibly two feet or more, and thatadditional distance must be accounted for in yourcalculation. In our example, we are using a nonelasticharness to keep our Total Fall Distance to aminimum.TFD = 4’ + 3.5’ + 1’ + VEL + SFMost manufacturers design their Shock-AbsorbingLanyards so that the vertical elongation of the lanyardis included in the OSHA mandated 3.5’ maximumdeceleration distance. However, if we were using arope grab or horizontal lifeline, or if you wereattaching to a non-rigid anchorage connector,VEL would need to be calculated based on thespecifications of those components in your Fall ArrestSystem. Since we are using a 6’ Shock-AbsorbingLanyard in our example and the VEL is alreadyconsidered in the lanyard design, we will enter a “0”for the VEL variable.TFD = 4’ + 3.5’ + 1’ + 0’ + SFThe final variable of the formula is the Safety Factor.It is always a good idea to include at least a 1’ safetyfactor; however, the safety factor could reflect anynumber that makes you comfortable with yourcalculation.Now we can solve our Total Fall Distance Formula:TFD = 4’ + 3.5’ + 1’ + 0’ + 1’TFD = 9.5’Now we know that if the worker in Figure 1 wouldhappen to fall, his Total Fall Distance will be 9.5’.But what does this number really mean? It meansthat the clearance between the working surface andthe next closest object in the fall path must be at least9.5’. It is important to remember that Total FallDistance is not always measured from the workingsurface to the ground, because sometimes theground is not the closest object be neath the workingplatform. If there is any type of obstruction in the fallpath of the worker (see Figure 2), your availableclearance is measured from the working platform tothe top of that obstruction. Sometimes thesedistances can be very short, and a fall protectionmeans other than a 6’ shock-absorbing lanyard isnecessary. Total Fall Distance calculations canbecome more complex than those demonstratedhere. The numbers and variables will changedepending upon the typeof Personal Fall ArrestSystem used. Forexample, whencalculating Total FallDistances for HorizontalLifeline Systems youhave additionalvariables to consider,such as cable deflectionand the number ofpeople on the system.The important thing toremember is thatcalculating Total FallDistance is just asimportant as selectingthe right product for thejob. Forgetting tocalculate Total FallDistance is just asdangerous as forgettingto put on your harnessbefore you begin toperform any work atheights.Figure 2.Table 1.FreeFall Distance forvarious Shock-AbsorbingLanyard Lengths andEl e va tions of AnchorageConnection Point.Distance of AnchorageConnection PointAbove (+) or Below (-)Har ness Fall Arrest D-RingLength ofShock-AbsorbingLanyard6' 5' 4' 3'+3 3 2 1 0+2 4 3 2 1+1 5 4 3 20 6 5 4 3-1 7 6 5 4-2 8 7 6 5-3 9 8 7 6-4 10 9 8-5 11 10-6 12FreeFall Distance56Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010

Learn from theExpertsMSA TrainingMSA offers the following ANSI Z359 Compliant Fall Protection training courses:MSA training courses are compliant to the newANSI Z359 family of fall protection standards andmeet "ANSI Z490.1 2001 Criteria for Acceptedpractices in Safety, Health, and EnvironmentalTraining".Qualified Person TrainingThis course will train the Qualified Person in theuse of all fall protection equipment and systemsencountered in work and includes the following;• Fall protection regulations• Equipment use, selection and inspection• Preparing fall hazard surveys• Developing engineering system standards• Determining system clearance requirements• Designing and selecting anchorages• Designing new and evaluating existinghorizontal systems• Developing written fall protection proceduresand rescue procedures• Determining potential impact forcesAuthorized Person TrainingThis course will train the Authorized Person toinspect, anchor, assemble and use thefall protection in work applications. TheAuthorized Person training will include thefollowing information;• Fall hazard recognition• Fall hazard control methods• Fall protection regulations• How to use written fall protection procedures• Equipment use, selection and inspection• Fall protection rescue proceduresAdministrator TrainingThis course will train the Fall Protection ProgramAdministrator to have a working knowledge ofcurrent fall protection regulations, standards andfall protection equipment and systems. The fallprotection program administrator training willinclude the following:• Fall protection regulations• Developing and maintaining a managedfall protection program• Fall hazard surveys• Selection and appointment of safety committeepersonnel• Fall protection system selection• Development of approved equipment purchaselists• Selection and appointment of qualifiedand competent people• Development of engineering system standardsCompetent Rescue TrainingThis course will train the Competent FallProtection Rescuer how to select, inspect,anchor, assemble and use fall protection andrescue equipment in their work applications.The Competent Fall Protection Rescuer trainingwill include the following:• Fall hazard control methods• Fall protection and rescue regulations• Assessment of fall hazards to determineappropriate rescue methods• Training on suspension trauma• Equipment use, selection and inspection• Rescue system assessment• Development of written fall protection rescueproceduresAuthorized Rescuer TrainingThis course will train the Authorized FallProtection Rescuer how to select, inspect,anchor, and use fall protection and rescueequipment in their work applications. TheAuthorized Fall Protection Rescuer training willinclude the following:• Fall hazard recognition• Fall hazard control methods• Fall protection and rescue regulations• Training on suspension trauma• How to use written fall protection and rescueprocedures• Inspection of rescue and fall protectionequipment components and systemsbefore useOther courses available include:• Competent Person for "Safety-At-Heights"• Fundamentals of safety at heights• Competent Person for equipment inspection• Tower climbing safety• Confined space entryHANDS-ONCOMPREHENSIVECOURSESLET US TRAIN YOUAT YOUR FACILITY!REGISTRATION INFORMATIONWe invite you to attend our next training session,which will prove to be a comprehensive andvaluable experience. For registration information,please contact the MSA Customer Service Centerby phone (1.800.672.222) or by fax (1.800.967.0398),or log onto our web site at www.MSAnet.com.TRAINING CENTERSBUTLER, PAENGLEWOOD, COCustomer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010 57

Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-901058Part Number Index10001360 . . . . . . . . 34, 3510001422 . . . . . . . . 34, 3510001620 . . . . . . . . . . . 2910002820 . . . . . . . . . . . 3010003206 . . . . . . . . . . . 2910003213 . . . . . . . . . . . 3010006446 . . . . . . . . . . . 3910006447 . . . . . . . . . . . 3910006463 . . . . . . . . . . . 3910006464 . . . . . . . . . . . 3910006465 . . . . . . . . . . . 3910006466 . . . . . . . . . . . 3910006467 . . . . . . . . . . . 3910006468 . . . . . . . . . . . 3910006469 . . . . . . . . . . . 3910006470 . . . . . . . . . . . 3910011744 . . . . . . . . . . . 4010011745 . . . . . . . . . . . 4010013150 . . . . . . . . . . . 4310013151 . . . . . . . . . . . 4310013152 . . . . . . . . . . . 4310013153 . . . . . . . . . . . 4310016468 . . . . . . . . . . . 3010016568 . . . . . . . . . . . 4010016569 . . . . . . . . . . . 4010016682 . . . . . . . . . . . 4010016683 . . . . . . . . . . . 4010017593 . . . . . . . . . . . 3010017594 . . . . . . . . . . . 3010017595 . . . . . . . . . . . 3010017596 . . . . . . . . . . . 3010017931 . . . . . . . . . . . 3910017933 . . . . . . . . . . . 3910019084 . . . . . . . . . . . 4310019085 . . . . . . . . . . . 4310020062 . . . . . . . . . . . 1910020065 . . . . . . . . . . . 1910020066 . . . . . . . . . . . 1910020067 . . . . . . . . . . . 1910022050 . . . . . . . . . . . 4010022051 . . . . . . . . . . . 4010022279 . . . . . . . . . . . 2710022826 . . . . . . . . . . . 4310022827 . . . . . . . . . . . 4310022912 . . . . . . . . . . . 2710022914 . . . . . . . . . . . 2710022915 . . . . . . . . . . . 2710023016 . . . . . . . . . . . 4010023017 . . . . . . . . . . . 4010023485 . . . . . . . . . . . 2610023490 . . . . . . . . . . . 2910023932 . . . . . . . . . . . 2210023933 . . . . . . . . . . . 2210023936 . . . . . . . . . . . 2210023937 . . . . . . . . . . . 2210023966 . . . . . . . . . . . 4110023967 . . . . . . . . . . . 4110023968 . . . . . . . . . . . 4110023970 . . . . . . . . . . . 2210023971 . . . . . . . . . . . 2210026048 . . . . . . . . . . . 2610026049 . . . . . . . . . . . 2610026060 . . . . . . . . . . . 2610026061 . . . . . . . . . . . 3210026062 . . . . . . . . . . . 3210026063 . . . . . . . . . . . 3210026064 . . . . . . . . . . . 3210027104 . . . . . . . . . . . 2610028444 . . . . . . . . . . . 1910030023 . . . . . . . . . . . 5010030024 . . . . . . . . . . . 5010030025 . . . . . . . . . . . 4910030270 . . . . . . . . . . . 4510030271 . . . . . . . . . . . 4510030272 . . . . . . . . . . . 4510030273 . . . . . . . . . . . 4510030274 . . . . . . . . . . . 4610030275 . . . . . . . . . . . 4610030276 . . . . . . . . . . . 4610030277 . . . . . . . . . . . 4610030433 . . . . . . . . . . . 3510030608 . . . . . . . . . . . 3110033830 . . . . . . . . . . . 1010033831 . . . . . . . . . . . 1010033833 . . . . . . . . . . . 1010033834 . . . . . . . . . . . 1010033836 . . . . . . . . . . . 1010033837 . . . . . . . . . . . 1010033839 . . . . . . . . . . . 1010033840 . . . . . . . . . . . 1010034237 . . . . . . . . . . . 3510035039 . . . . . . . . . . . 2210036032 . . . . . . . . . . . 4210038363 . . . . . . . . . . . 3110040010 . . . . . . . . . . . 4210040018 . . . . . . . . . . . 5310041517 . . . . . . . . . . . . 610041518 . . . . . . . . . . . . 610041519 . . . . . . . . . . . . 610041590 . . . . . . . . . . . . 610041591 . . . . . . . . . . . . 610041592 . . . . . . . . . . . . 610041593 . . . . . . . . . . . . 610041594 . . . . . . . . . . . . 610041595 . . . . . . . . . . . . 610041596 . . . . . . . . . . . . 610041597 . . . . . . . . . . . . 610041598 . . . . . . . . . . . . 610041599 . . . . . . . . . . . . 610041600 . . . . . . . . . . . . 610041601 . . . . . . . . . . . . 610041602 . . . . . . . . . . . . 610041603 . . . . . . . . . 6, 3510041604 . . . . . . . . . . . . 610041605 . . . . . . . . . . . . 610041606 . . . . . . . . . . . . 610041607 . . . . . . . . . . . . 610041608 . . . . . . . . . . . . 610041609 . . . . . . . . . . . . 610041610 . . . . . . . . . . . . 610041611 . . . . . . . . . . . . 610041612 . . . . . . . . . . . . 610041613 . . . . . . . . . . . . 610041614 . . . . . . . . . . . . 610041615 . . . . . . . . . . . . 610041616 . . . . . . . . . . . . 610041617 . . . . . . . . . . . . 610041618 . . . . . . . . . . . . 610042792 . . . . . . . . . . . 2910042794 . . . . . . . . . . . 2910043033 . . . . . . . . . . . 1010043147 . . . . . . . . . . . 1910043354 . . . . . . . . . . . . 610043355 . . . . . . . . . . . . 610043691 . . . . . . . . . . . . 610043692 . . . . . . . . . . . . 610044811 . . . . . . . . . . . 2810045936 . . . . . . . . . . . 2210045938 . . . . . . . . . . . 2210047084 . . . . . . . . . . . 2110047085 . . . . . . . . . . . 2110047086 . . . . . . . . . . . 2110047087 . . . . . . . . . . . 2110047290 . . . . . . . . . . . 2210048342 . . . . . . . . . . . . 710048343 . . . . . . . . . . . . 710048344 . . . . . . . . . . . . 710048345 . . . . . . . . . . . . 710048346 . . . . . . . . . . . . 710048347 . . . . . . . . . . . . 710048348 . . . . . . . . . . . . 710048349 . . . . . . . . . . . . 710048350 . . . . . . . . . . . . 710048351 . . . . . . . . . . . . 710048352 . . . . . . . . . . . . 710048472 . . . . . . . . . . . 4110048473 . . . . . . . . . . . 4110049751 . . . . . . . . . . . 3410050504 . . . . . . . . . . . 3710051455 . . . . . . . . . . . 2910051456 . . . . . . . . . . . 2910051457 . . . . . . . . . . . 2910051873 . . . . . . . . . . . 2210053001 . . . . . . . . . . . . 710053002 . . . . . . . . . . . . 710053003 . . . . . . . . . . . . 710053004 . . . . . . . . . . . . 710053005 . . . . . . . . . . . . 710053006 . . . . . . . . . . . . 710053007 . . . . . . . . . . . . 710053008 . . . . . . . . . . . . 710053009 . . . . . . . . . . . . 710053010 . . . . . . . . . . . . 710053011 . . . . . . . . . . . 2210053012 . . . . . . . . . . . 2210053013 . . . . . . . . . . . 2210053014 . . . . . . . . . . . 2210053015 . . . . . . . . . . . 2210053016 . . . . . . . . . . . 2210053558 . . . . . . . . . . . 3710053559 . . . . . . . . . . . 3710053560 . . . . . . . . . . . 3710054077 . . . . . . . . 34, 3610054402 . . . . . . . . . . . . 710054403 . . . . . . . . . . . . 710054719 . . . . . . . . . . . . 710054720 . . . . . . . . . . . . 710054761 . . . . . . . . . . . . 710054762 . . . . . . . . . . . . 710055061 . . . . . . . . . . . 3510055659 . . . . . . . . . . . 4410055660 . . . . . . . . . . . 4410055716 . . . . . . . . . . . 3110055717 . . . . . . . . . . . 3110055718 . . . . . . . . . . . 3110055719 . . . . . . . . . . . 3110055721 . . . . . . . . . . . 4410055733 . . . . . . . . . . . 3410056384 . . . . . . . . . . . 3510056586 . . . . . . . . . . . 3510056587 . . . . . . . . . . . 3410056762 . . . . . . . . 21, 2710056763 . . . . . . . . 21, 2710056986 . . . . . . . . . . . 3410057087 . . . . . . . . . . . 1010057104 . . . . . . . . . . . 3410057342 . . . . . . . . . . . 3410057538 . . . . . . . . . . . . 710058886 . . . . . . . . . . . 3710059805 . . . . . . . . . . . 4410059806 . . . . . . . . . . . 4410059807 . . . . . . . . . . . 4410059808 . . . . . . . . . . . 4410059809 . . . . . . . . . . . 4410059837 . . . . . . . . . . . 2210060100 . . . . . . . . . . . 1810060101 . . . . . . . . . . . 1810060102 . . . . . . . . . . . 1810060103 . . . . . . . . . . . 1810060104 . . . . . . . . . . . 1810060105 . . . . . . . . . . . 1810060106 . . . . . . . . . . . 1810060107 . . . . . . . . . . . 1810060108 . . . . . . . . . . . 1810060110 . . . . . . . . . . . 1810060111 . . . . . . . . . . . 1810060112 . . . . . . . . . . . 1810060113 . . . . . . . . . . . 1810060114 . . . . . . . . . . . 1810060115 . . . . . . . . . . . 1810060116 . . . . . . . . . . . 1810060139 . . . . . . . . . . . 2010060140 . . . . . . . . . . . 2010062316 . . . . . . . . . . . 3210062329 . . . . . . . . . . . 3210062405 . . . . . . . . . . . 3210062411 . . . . . . . . . . . 3210062438 . . . . . . . . . . . 2210062471 . . . . . . . . . . . . 710062597 . . . . . . . . . . . 3010062921 . . . . . . . . . . . . 710063412 . . . . . . . . . . . 3410063431 . . . . . . . . . . . 1910063441 . . . . . . . . . . . 1910063653 . . . . . . . . . . . . 710063654 . . . . . . . . . . . . 710063656 . . . . . . . . . . . . 710063657 . . . . . . . . . . . . 710063672 . . . . . . . . . . . 3510066285 . . . . . . . . . . . 3210067455 . . . . . . . . . . . 1310067456 . . . . . . . . . . . 1310067512 . . . . . . . . . . . 1310070422 . . . . . . . . . . . 1710070423 . . . . . . . . . . . 1710070424 . . . . . . . . . . . 1710070425 . . . . . . . . . . . 1710070426 . . . . . . . . . . . 1710070427 . . . . . . . . . . . 1710070428 . . . . . . . . . . . 1710070429 . . . . . . . . . . . 1710070430 . . . . . . . . . . . 1710070431 . . . . . . . . . . . 1710070432 . . . . . . . . . . . 1710070433 . . . . . . . . . . . 1710070434 . . . . . . . . . . . 1710070435 . . . . . . . . . . . 1710070436 . . . . . . . . . . . 1710070437 . . . . . . . . . . . 1710070438 . . . . . . . . . . . 1710070439 . . . . . . . . . . . 1710070440 . . . . . . . . . . . 1710070441 . . . . . . . . . . . 1710070442 . . . . . . . . . . . 1710070443 . . . . . . . . . . . 1710070444 . . . . . . . . . . . 1710070445 . . . . . . . . . . . 1710070446 . . . . . . . . . . . 1710070447 . . . . . . . . . . . 1710070448 . . . . . . . . . . . 1710070449 . . . . . . . . . . . 1710070450 . . . . . . . . . . . 1710070451 . . . . . . . . . . . 1710070452 . . . . . . . . . . . 1710070453 . . . . . . . . . . . 1710070458 . . . . . . . . . . . 1810070459 . . . . . . . . . . . 1810070460 . . . . . . . . . . . 1810070461 . . . . . . . . . . . 1810070462 . . . . . . . . . . . 1810070463 . . . . . . . . . . . 1810070464 . . . . . . . . . . . 1810070465 . . . . . . . . . . . 1810070466 . . . . . . . . . . . 1810070467 . . . . . . . . . . . 1810070468 . . . . . . . . . . . 1810070469 . . . . . . . . . . . 1810070470 . . . . . . . . . . . 1810070471 . . . . . . . . . . . 1810070472 . . . . . . . . . . . 1810070473 . . . . . . . . . . . 1810070474 . . . . . . . . . . . 1810070475 . . . . . . . . . . . 1810070476 . . . . . . . . . . . 1810070477 . . . . . . . . . . . 1810070478 . . . . . . . . . . . 1810070479 . . . . . . . . . . . 1810070480 . . . . . . . . . . . 1810070481 . . . . . . . . . . . 1810071688 . . . . . . . . . . . 1910072081 . . . . . . . . . . . . 610072082 . . . . . . . . . . . . 610072083 . . . . . . . . . . . . 610072472 . . . . . . . . . . . 2010072473 . . . . . . . . . . . 2010072474 . . . . . . . . . . . 2010072475 . . . . . . . . . . . 2010072478 . . . . . . . . . . . . 910072479 . . . . . . . . . . . . 910072480 . . . . . . . . . . . . 910072481 . . . . . . . . . . . . 910072482 . . . . . . . . . . . . 910072483 . . . . . . . . . . . . 910072484 . . . . . . . . . . . . 910072485 . . . . . . . . . . . . 910072486 . . . . . . . . . . . . 910072487 . . . . . . . . . . . . 910072488 . . . . . . . . . . . . 910072489 . . . . . . . . . . . . 910072490 . . . . . . . . . . . . 910072491 . . . . . . . . . . . . 910072492 . . . . . . . . . . . . 910072493 . . . . . . . . . . . . 910072494 . . . . . . . . . . . . 910072495 . . . . . . . . . . . . 910072496 . . . . . . . . . . . . 910072497 . . . . . . . . . . . . 910072498 . . . . . . . . . . . 2810072499 . . . . . . . . . . . 2710072789 . . . . . . . . . . . 3010072793 . . . . . . . . . . . 2910072795 . . . . . . . . . . . 2910073051 . . . . . . . . . . . . 610073052 . . . . . . . . . . . . 610073708 . . . . . . . . . . . 2010074474 . . . . . . . . . . . 3310074475 . . . . . . . . . . . 3310074476 . . . . . . . . . . . 3310074479 . . . . . . . . . . . 3310074480 . . . . . . . . . . . 3310074529 . . . . . . . . . . . 1810074530 . . . . . . . . . . . 1810074561 . . . . . . . . . . . 1810074562 . . . . . . . . . . . 1810074563 . . . . . . . . . . . 1810074564 . . . . . . . . . . . 1810074565 . . . . . . . . . . . 1810074566 . . . . . . . . . . . 1810074583 . . . . . . . . . . . 3310074584 . . . . . . . . . . . 3310074587 . . . . . . . . . . . 3310074588 . . . . . . . . . . . 3310076124 . . . . . . . . . . . 2010077489 . . . . . . . . . . . 1910077490 . . . . . . . . . . . . 910077571 . . . . . . . . . . . . 910077572 . . . . . . . . . . . . 910077573 . . . . . . . . . . . . 910077589 . . . . . . . . . . . 3310077590 . . . . . . . . . . . 3310077853 . . . . . . . . . . . 1810077855 . . . . . . . . . . . 1810081570 . . . . . . . . . . . 3010081594 . . . . . . . . . . . 3010082683 . . . . . . . . . . . 2910087003 . . . . . . . . . . . 2910088065 . . . . . . . . . . . 2210088064 . . . . . . . . . . . 2810088066 . . . . . . . . . . . 2210088067 . . . . . . . . . . . 2210088068 . . . . . . . . . . . 2210088069 . . . . . . . . . . . 2210088070 . . . . . . . . . . . 2210088071 . . . . . . . . . . . 2210088072 . . . . . . . . . . . 2210088073 . . . . . . . . . . . 2110088074 . . . . . . . . . . . 2110088075 . . . . . . . . . . . 2110088076 . . . . . . . . . . . 2110088077 . . . . . . . . . . . 2210088120 . . . . . . . . . . . 2510088211 . . . . . . . . . . . 2510088212 . . . . . . . . . . . 2510088213 . . . . . . . . . . . 2410088214 . . . . . . . . . . . 2410088215 . . . . . . . . . . . 2410088216 . . . . . . . . . . . 2410088217 . . . . . . . . . . . 2410088219 . . . . . . . . . . . 2610088220 . . . . . . . . . . . 2610088221 . . . . . . . . . . . 2610088222 . . . . . . . . . . . 2610088223 . . . . . . . . . . . 2410088224 . . . . . . . . . . . 2410088225 . . . . . . . . . . . 2410088226 . . . . . . . . . . . 2410088227 . . . . . . . . . . . 2410088228 . . . . . . . . . . . 2410088229 . . . . . . . . . . . 2410088230 . . . . . . . . . . . 2410088231 . . . . . . . . . . . 2410088232 . . . . . . . . . . . 2410088233 . . . . . . . . . . . 2410088234 . . . . . . . . . . . 2510088235 . . . . . . . . . . . 2510088236 . . . . . . . . . . . 2510088237 . . . . . . . . . . . 2410088238 . . . . . . . . . . . 2410088239 . . . . . . . . . . . 2410088240 . . . . . . . . . . . 2410088241 . . . . . . . . . . . 2410088242 . . . . . . . . . . . 2610088243 . . . . . . . . . . . 2610088244 . . . . . . . . . . . 2610088245 . . . . . . . . . . . 2610088246 . . . . . . . . . . . 2610088247 . . . . . . . . . . . 2610088248 . . . . . . . . . . . 2610088250 . . . . . . . . . . . 2610088252 . . . . . . . . . . . 2610088253 . . . . . . . . . . . 2010088255 . . . . . . . . . . . 2010088256 . . . . . . . . . . . 2010088257 . . . . . . . . . . . 2010088259 . . . . . . . . . . . 2410088260 . . . . . . . . . . . 2410088261 . . . . . . . . . . . 2410088262 . . . . . . . . . . . 2410088263 . . . . . . . . . . . 2410088264 . . . . . . . . . . . 2410088265 . . . . . . . . . . . 2410088266 . . . . . . . . . . . 2410088267 . . . . . . . . . . . 2410088268 . . . . . . . . . . . 2410088269 . . . . . . . . . . . 2410088386 . . . . . . . . . . . 3710088387 . . . . . . . . . . . 3710089205 . . . . . . . . . . . 3110089207 . . . . . . . . . . . 3110089209 . . . . . . . . . . . 3110089345 . . . . . . . . . . . 2710089346 . . . . . . . . . . . 2710089347 . . . . . . . . . . . 2710090058 . . . . . . . . . . . 2810092958 . . . . . . . . . . . 3310092959 . . . . . . . . . . . 3310093348 . . . . . . . . . . . 3710093349 . . . . . . . . . . . 3710093350 . . . . . . . . . . . 3710093351 . . . . . . . . . . . 3710093352 . . . . . . . . . . . 3710093353 . . . . . . . . . . . 3710093354 . . . . . . . . . . . 3710093355 . . . . . . . . . . . 3710093356 . . . . . . . . . . . 3710093357 . . . . . . . . . . . 3710093797 . . . . . . . . . . . 3710093798 . . . . . . . . . . . 37

Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010Part Number Index5910093799 . . . . . . . . . . . 3710093800 . . . . . . . . . . . 3710093811 . . . . . . . . . . . 3710093812 . . . . . . . . . . . 3710093813 . . . . . . . . . . . 3710093814 . . . . . . . . . . . 3710093815 . . . . . . . . . . . 3710093816 . . . . . . . . . . . 3710093817 . . . . . . . . . . . 3710093818 . . . . . . . . . . . 3710093819 . . . . . . . . . . . 3710093820 . . . . . . . . . . . 3710093821 . . . . . . . . . . . 3710093822 . . . . . . . . . . . 3710093823 . . . . . . . . . . . 3710093824 . . . . . . . . . . . 3710093825 . . . . . . . . . . . 3710093826 . . . . . . . . . . . 37415108 . . . . . . . . . . . . . 27415171 . . . . . . . 30, 45, 46415172 . . . . . . . 30, 45, 46415173 . . . . . . . 30, 45, 46415723 . . . . . . . . . . . . . 27415724 . . . . . . . . . . . . . 27415834 . . . . . . . . . . . . . 28415836 . . . . . . . . . . 45, 46415837 . . . . . . . . . . . . . 41415842 . . . . . . . . . . . . . 10415844 . . . . . . . . . . . . . 10415865 . . . . . . . . . . . . . 36415869 . . . . . . . . . . . . . 36415870 . . . . . . . . . . . . . 36415871 . . . . . . . . . . . . . 36415872 . . . . . . . . . . . . . 36415873 . . . . . . . . . . . . . 36415940 . . . . . . . 34, 35, 36415941 . . . . . . . . . . . . . 36415942 . . . . . . . . . . . . . 36415943 . . . . . . . . . . . . . 36415944 . . . . . . . . . . . . . 10415946 . . . . . . . . . . . . . 10415947 . . . . . . . 10, 34, 35415949 . . . . . . . . . . . . . 10415950 . . . . . . . . . . . . . 10415952 . . . . . . . . . . . . . 10415957 . . . . . . . . . . . . . 28415964 . . . . . . . . . . . . . 36415965 . . . . . . . . . . . . . 36416048 . . . . . . . . . . . . . 36416049 . . . . . . . 34, 35, 36416050 . . . . . . . . . . . . . 36416051 . . . . . . . . . . . . . 36416052 . . . . . . . . . . . . . 36416053 . . . . . . . . . . . . . 36416067 . . . . . . . . . . . . . 34416068 . . . . . . . . . . . . . 30416070 . . . . . . . . . . 34, 35501443 . . . . . . . . . . . . . 31505002 . . . . . . . . . . . . . 27505012 . . . . . . . . . . . . . 27505063 . . . . . . . . . . . . . 28505088 . . . . . . . . . . . . . 27505097 . . . . . . . . . . . . . 27505166 . . . . . . . . . . . . . 27505197 . . . . . . . . . . . . . 27505201 . . . . . . . . . . . . . 27505202 . . . . . . . . . . . . . 27505203 . . . . . . . . . . . . . 27505204 . . . . . . . . . . . . . 27505210 . . . . . . . . . . . . . 27505211 . . . . . . . . . . . . . 27505217 . . . . . . . . . . . . . 27505233 . . . . . . . . . . . . . 29505282 . . . . . . . . . . . . . 29505298 . . . . . . . . . . . . . 29505314 . . . . . . . . . . . . . 31505318 . . . . . . . . . . . . . 19506202 . . . . . . . . . . . . . 39506203 . . . . . . . . . . . . . 39506204 . . . . . . . . . . . . . 39506205 . . . . . . . . . . . . . 39506206 . . . . . . . . . . . . . 39506207 . . . . . . . . . . . . . 39506208 . . . . . . . . . . . . . 39506209 . . . . . . . . . . . . . 39506216 . . . . . . . . . . . . . 41506232 . . . . . . . . . . . . . 41506252 . . . . . . . . . . . . . 30506254 . . . . . . . . . . 45, 46506255 . . . . . . . . . . 45, 46506259 . . . . . . . . . . . . . 31506266 . . . . . . . . . . . . . 30506270 . . . . . . . . . . . . . 42506273 . . . . . . . . . . . . . 42506274 . . . . . . . . . . . . . 42506275 . . . . . . . . . . . . . 42506277 . . . . . . . . . . . . . 42506282 . . . . . . . . . . . . . 42506283 . . . . . . . . . . . . . 42506308 . . . . . . . . . . . . . 31506312 . . . . . . . . . . . . . 42506329 . . . . . . . . . . . . . 42506362 . . . . . . . . . . . . . 41506379 . . . . . . . . . . . . . 30506388 . . . . . . . . . . . . . 42506389 . . . . . . . . . . . . . 42506390 . . . . . . . . . . . . . 42506391 . . . . . . . . . . . . . 42506420 . . . . . . . . . . . . . 40506492 . . . . . . . . . . . . . 41506507 . . . . . . . . . . . . . 31506509 . . . . . . . . . . . . . 31506563 . . . . . . . . . . . . . 45506568 . . . . . . . . . . . . . 41506572 . . . . . . . . . . . . . 31506590 . . . . . . . . . . . . . 41506591 . . . . . . . . . . . . . 31506603 . . . . . . . . . . . . . 41506613 . . . . . . . . . . . . . 41506614 . . . . . . . . . . . . . 41506615 . . . . . . . . . . . . . 39506619 . . . . . . . . . . . . . 39506622 . . . . . . . . . . . . . 41506632 . . . . . . . . . . . . . 30506636 . . . . . . . . . . . . . 45506637 . . . . . . . . . . . . . 45506639 . . . . . . . . . . . . . 31506640 . . . . . . . . . . . . . 31506642 . . . . . . . . . . . . . 31506643 . . . . . . . . . . . . . 30506645 . . . . . . . . . . . . . 46506646 . . . . . . . . . . . . . 46506647 . . . . . . . . . . . . . 46506648 . . . . . . . . . . 45, 46506649 . . . . . . . . . . . . . 46506662 . . . . . . . . . . . . . 45506663 . . . . . . . . . . 45, 46506665 . . . . . . . . . . . . . 46506667 . . . . . . . . . . . . . 41506668 . . . . . . . . . . . . . 41506669 . . . . . . . . . . . . . 30506672 . . . . . . . . . . . . . 30506673 . . . . . . . . . . . . . 30506682 . . . . . . . 30, 45, 46507005 . . . . . . . . . . . . . 53507006 . . . . . . . . . . . . . 53507144 . . . . . . . . . . . . . 19596589 . . . . . . . . . . . . . 31SCE107007. . . . . . . . . . 48SCE107010. . . . . . . . . . 48SCE1074411200. . . . . . 48SCE109001. . . . . . . . . . 52SCE109003. . . . . . . . . . 52SCE400020. . . . . . . . . . 53SCH3187511 . . . . . . . . 28SCL3267303LS. . . . . . . 28SCL3267304LS. . . . . . . 28SCL3267306LS. . . . . . . 28SCL3267306RM. . . . . . 28SCL4067304LS. . . . . . . 25SCL4067304LSTL . . . . 25SCL4067304RM. . . . . . 25SCL4067305LS. . . . . . . 25SCL4067306LS. . . . . . . 25SCL4067306RM. . . . . . 25SCL4067308LS. . . . . . . 25SCL4068104LS. . . . . . . 25SCL4068106LS. . . . . . . 25SDC726050 . . . . . . . . . 32SDC726100 . . . . . . . . . 32SDC726150 . . . . . . . . . 32SFP2267503 . . . . . . . . . 31SFP2267504 . . . . . . . . . 31SFP2267506 . . . . . . . . . 31SFP3267502 . . . . . . . . . 29SFP3267504 . . . . . . . . . 29SFP3267506 . . . . . . . . . 29SFP675009 . . . . . . . . . . 52SFP675012 . . . . . . . . . . 52SFPLS350050. . . . . . . . 42SFPLS350100. . . . . . . . 42SFPLS350150. . . . . . . . 42SFPLS350200. . . . . . . . 42SFPLS353050. . . . . . . . 42SFPLS353100. . . . . . . . 42SFPLS353200. . . . . . . . 42SFPRS6000 . . . . . . . . . 31SHL1009035BLK . . . . . 43SHL1009060BLK . . . . . 43SHL2009040. . . . . . . . . 43SHL2009040IW . . . . . . 43SHL2009060. . . . . . . . . 43SHL2009060IW . . . . . . 43SHLARD6A . . . . . . . . . 44SKITSMT001 . . . . . . . . 51SLLNL672060LS . . . . . 36SLLNL672100LS . . . . . 36SLLNL672200LS . . . . . 36SLLPB672060LS . . . . . 35SMI420560. . . . . . . . . . 47SNL3248402LS . . . . . . 27SNL3248403LS . . . . . . 27SNL3248403RM . . . . . 27SNL3248404LS . . . . . . 27SNL3248405LS . . . . . . 27SNL3248405RM . . . . . 27SNL3248406LS . . . . . . 27SNL3248406RM . . . . . 27SNL3248407LS . . . . . . 27SNL3248408LS . . . . . . 27SNL3248409LS . . . . . . 27SNL3248410LS . . . . . . 27SNL3248412LS . . . . . . 27SNL3278104LS . . . . . . 27SNL3278106LS . . . . . . 27SNL4048404LS . . . . . . 26SNL4048404RM . . . . . 26SNL4048405LS . . . . . . 26SNL4048406LS . . . . . . 26SNL4048406RM . . . . . 26SNL4048408LS . . . . . . 26SNL4048410LS . . . . . . 26SNL4078106LS . . . . . . 26SNL4098604LS . . . . . . 26SNYL537DH306. . . . . . 28SNYR537DH306 . . . . . 28SPL4048406LS. . . . . . . 25SPPPU8708 . . . . . . . . . 47SPPPU8710 . . . . . . . . . 47SPPPU8717 . . . . . . . . . 47SPPPU8720 . . . . . . . . . 47SPPRL4000 . . . . . . . . . 47SRB430101 . . . . . . . . . 48SRB430105 . . . . . . . . . 48SRB430201 . . . . . . . . . 48SRB430205 . . . . . . . . . 48SRB430301 . . . . . . . . . 48SRB430305 . . . . . . . . . 48SRB430601 . . . . . . . . . 48SRB430605 . . . . . . . . . 48SRB675009 . . . . . . . . . 52SRCA401 . . . . . . . . . . . 52SRCA613 . . . . . . . . . . . 31SRCA722 . . . . . . . . . . . 31SRCA853 . . . . . . . . . . . 31SRCC413 . . . . . . . . . . . 31SRCC641 . . . . . . . . 31, 47SRCC642 . . . . . . . . . . . 31SRCC643 . . . . . . . . . . . 31SRCC740 . . . . . . . . . . . 31SRH30701 . . . . . . . . . . 53SRH30703 . . . . . . . . . . 53SRIW1000 . . . . . . . . . . 36SRP500500050. . . . . . . 48SRP500700050. . . . . . . 48SRP500860. . . . . . . . . . 48SRP500900. . . . . . . . . . 48SRP5020550050. . . . . . 48SRP504860SL050 . . . . 48SRP504863SL050 . . . . 48SRP504866SL050 . . . . 48SRP508760050. . . . . . . 48SRP508960050. . . . . . . 48SRP510660SL050 . . . . 48SRP530961050. . . . . . . 48SRP544000050. . . . . . . 48SRP7082. . . . . . . . . . . . 35SRP9200. . . . . . . . . 34, 35SRS15200. . . . . . . . . . . 49SRS3100. . . . . . . . . 51, 52SRS3200. . . . . . . . . . . . 53SRS323150. . . . . . . . . . 51SRS323300. . . . . . . . . . 51SRSF5077. . . . . . . . . . . 47SRSFFE2120 . . . . . . . . 47SRSPR5980 . . . . . . . . . 47SRSPR5990 . . . . . . . . . 47SRSSK200 . . . . . . . . . . 52SSA4002LS . . . . . . . . . 28SSA4002LS/LS . . . . . . 35SSB22040 . . . . . . . . . . 29SSH3042000 . . . . . . . . 35SSH30420000 . . . . 11, 35SSH30420001 . . . . . . . 11SSH30420005 . . . . . . . 11SSH30420020 . . . . . . . 11SSH30420028 . . . . . . . 11SSH30420050 . . . . . . . 11SSH30420055 . . . . . . . 11SSH30420060 . . . . 11, 35SSH30420061 . . . . . . . 11SSH30420064 . . . . . . . 11SSH30420066 . . . . . . . 11SSH30420070 . . . . . . . 11SSH30420300 . . . . . . . 11SSH30420305 . . . . . . . 11SSH30420350 . . . . . . . 11SSH30420351 . . . . . . . 11SSH30420355 . . . . . . . 11SSH30420360 . . . . 11, 35SSH30420361 . . . . . . . 11SSH30420366 . . . . . . . 11SSH30425000 . . . . . . . 11SSH30425050 . . . . . . . 11SSH30425060 . . . . . . . 11SSH30425300 . . . . . . . 11SSH30425350 . . . . . . . 11SSH30430004 . . . . . . . 11SSH30430054 . . . . . . . 11SSH30430064 . . . . . . . 11SSH30430074 . . . . . . . 11SSH30430304 . . . . . . . 11SSH30430364 . . . . . . . 11SSH30435064 . . . . . . . 11SSH30435074 . . . . . . . 11SSH30435364 . . . . . . . 11SSH30440061 . . . . . . . 11SSH30440361 . . . . . . . 11SSH30440371 . . . . . . . 11SSH30620000 . . . . . . . 12SSH30620050 . . . . . . . 12SSH30620060 . . . . . . . 12SSH30620300 . . . . . . . 12SSH30625000 . . . . . . . 12SSH30625300 . . . . . . . 12SSH30630064 . . . . . . . 12SSH31420B . . . . . . . . . 12SSH31420C . . . . . . . . . 12SSH31420D . . . . . . . . . 12SSH31420D22 . . . . . . . 12SSH31420E . . . . . . . . . 12SSH31425C . . . . . . . . . 12SSH31425D22 . . . . . . . 12SSH31430D22 . . . . . . . 12SSH31435D22 . . . . . . . 12SSH31535B364 . . . . . . 12SSH31535C364 . . . . . . 12SSH31535D361 . . . . . . 12SSH31535D364 . . . . . . 12SSH31535E364 . . . . . . 12SSH31535F364 . . . . . . 12SSH3505017 . . . . . . . . 41SSH60930001 . . . . . . . 13SSH60930051 . . . . . . . 13SSH60930301 . . . . . . . 13SSH70920000 . . . . . . . 13SSH70920001 . . . . . . . 13SSH70920006 . . . . . . . 13SSH70920008 . . . . . . . 13SSH70920050 . . . . . . . 13SSH70920056 . . . . . . . 13SSH70920300 . . . . . . . 13SSH70920301 . . . . . . . 13SSH70920306 . . . . . . . 13SSH70920308 . . . . . . . 13SSH70920350 . . . . . . . 13SSH70920356 . . . . . . . 13SSH70920358 . . . . . . . 13SSH70925000 . . . . . . . 13SSH70935004 . . . . . . . 13SSH70940001 . . . . . . . 13SSH70940301 . . . . . . . 13SSH80720B . . . . . . . . . 14SSH80720C . . . . . . . . . 14SSH80720D . . . . . . . . . 14SSH80920000 . . . . . . . 14SSH80920001 . . . . . . . 14SSH80920006 . . . . . . . 14SSH80920008 . . . . . . . 14SSH80920020 . . . . . . . 14SSH80920021 . . . . . . . 14SSH80920050 . . . . . . . 14SSH80920051 . . . . . . . 14SSH80920056 . . . . . . . 14SSH80920300 . . . . . . . 14SSH80920301 . . . . . . . 14SSH80920305 . . . . . . . 14SSH80920306 . . . . . . . 14SSH80920308 . . . . . . . 14SSH80920350 . . . . . . . 14SSH80920351 . . . . . . . 14SSH80920356 . . . . . . . 14SSH80925000 . . . . . . . 14SSH80925001 . . . . . . . 14SSH80925050 . . . . . . . 14SSH80925301 . . . . . . . 14SSH80925321 . . . . . . . 14SSH80925351 . . . . . . . 14SSH80930004 . . . . . . . 14SSH80935004 . . . . . . . 14SSH80940001 . . . . . . . 14SSH80940051 . . . . . . . 14SSH80940301 . . . . . . . 14SSH80940351 . . . . . . . 14SSH90920000 . . . . . . . 15SSH90920001 . . . . . . . 15SSH90920006 . . . . . . . 15SSH90920050 . . . . . . . 15SSH90920300 . . . . . . . 15SSH90920301 . . . . . . . 15SSH90920305 . . . . . . . 15SSH90920306 . . . . . . . 15SSH90920308 . . . . . . . 15SSH90920350 . . . . . . . 15SSH90920355 . . . . . . . 15SSH90920356 . . . . . . . 15SSH90925000 . . . . . . . 15SSH90925001 . . . . . . . 15SSH90925300 . . . . . . . 15SSH90930004 . . . . . . . 15SSH90935004 . . . . . . . 15SSH90940001 . . . . . . . 15SSH91535B004 . . . . . . 15SSH91535B304 . . . . . . 15SSH91535C004 . . . . . . 15SSH91535C304 . . . . . . 15SSH91535D004 . . . . . . 15SSH91535D304 . . . . . . 15SSH91535E004 . . . . . . 15SSH91535E304 . . . . . . 15SSH91535F004 . . . . . . 15SSH91535F304 . . . . . . 15SSH91635B30438 . . . . 16SSH91635C30438 . . . . 16SSH91635D30438 . . . . 16SSH91635E30438 . . . . 16SSH91635F30438 . . . . 16SSH91720C301 . . . . . . 16SSH91720CD21608 . . . 16SSH91720CD23308 . . . 16SSH91720CD25308 . . . 16SSH91720CD25608 . . . 16SSH91725A001 . . . . . . 16SSH91725B001 . . . . . . 16SSH91725B301 . . . . . . 16SSH91725C001 . . . . . . 16SSH91725C301 . . . . . . 16SSH91725D001 . . . . . . 16SSH91725D301 . . . . . . 16SSH91725E001 . . . . . . 16SSH91725E301 . . . . . . 16SVL1011050 . . . . . . . . . 35SVL1013025 . . . . . . . . . 35SVL1013050 . . . . . . . . . 35SVLGT537R . . . . . . 34, 35SVLR537R018LS . . 34, 35SVLR78CS . . . . . . . . . . 35SVLR78LS . . . . . . . . . . 36SWL3268702LS . . . . . . 27SWL3268703LS . . . . . . 27SWL3268704LS . . . . . . 27SWL3268706LS . . . . . . 27SWL40400206LI . . . . . 25SWL40400206LLS . . . . 25SWL40400206LS . . . . . 25SWL40400206LSH . . . 25SWL40400206RM . . . . 25SWL404002P04LI . . . . 25SWL404002P06LI . . . . 25SWL4068104LS . . . . . . 25SWL4068703LS . . . . . . 25SWL4068704LS . . . . . . 25SWL4068706LS . . . . . . 25SWL4268706LS . . . . . . 25SWLP0635A . . . . . . . . 25

OSHA REGULATIONS UNDER TITLE 29 OF THE CODE OF FEDERAL REGULATIONSOSHA’s Occupational Safety and Health Standardsfor General IndustrySubpart D, Walking/Working Surfaces• Fixed Ladders, Ladder Safety Devices __________________________1910.27 (d) (5)• Safety Requirements for Scaffolding,Boatswain’s Chairs_________________________________________1910.28 (j) (4)Subpart F• Powered Platforms and Building Maintenance ___________________1910.66• Personal Fall Arrest Systems _________________________________1910.66, Appendix CSubpart R• Agricultural Operations _____________________________________1910.267• Telecommunications _______________________________________1910.268• Electric Power Generation,Transmission and Distribution ________________________________1910.269OSHA’s Safety and Health Standards for ConstructionSubpart E, Personal Protective Equipment• Safety Belts, Lifelines and Lanyards ___________________________1926.104• Safety Requirements for Scaffolding,Boatswain’s Chairs_________________________________________1926.105Subpart L, Scaffolding• Boatswain’s Chairs_________________________________________1926.450–454• Aerial Lift Platforms ________________________________________1926.453 (b) (2) (v)Subpart M, Fall Protection• Scope, Application and Definitions ____________________________1926.500• Duty to Have Fall Protection__________________________________1926.501• Scope, Application and Definitions ____________________________1926.502• Duty to Have Fall Protection__________________________________1926.503Subpart R, Scaffolding• Fall Protection ____________________________________________1926.750Subpart M, Ladders ___________________________________1926.1053ANSI VOLUNTARY CONSENSUS STANDARDSFall Protection Systems for Construction and Demolition OperationsFall Protection Systems for Construction and Demolition Operations ____________A10.32–2004General IndustryANSI Z359-2007 Fall Protection Code• ANSI Z359.0 ______________Definitions and Nomenclature• ANSI Z359.1 ______________Fall Arrest Systems• ANSI Z359.2 ______________Minimum Requirements for a Managed Fall Protection Program• ANSI Z359.3 ______________Work Positioning and Travel Restraint• ANSI Z359.4 ______________Rescue SystemsLadders—Fixed—Safety Requirements ___________________________________A14.3-1992CANADIAN STANDARDS UNDER THE CSA Z259 FALL PROTECTION SERIES• CAN/CSA Z259.1-1995 ______(withdrawn)• CAN/CSA Z259.10-06 _______Full Body Harnesses• CAN/CSA Z259.11-05 _______Energy Absorbers and Lanyards• CAN/CSA Z259.12-01 _______Connecting Components for Personal Fall Arrest Systems• CAN/CSA Z259.13-04 _______Design of Active Fall Protection Systems• CAN/CSA Z259.2.1-1998 _____Fall Arresters, Vertical Lifelines and Rails• CAN/CSA Z259.2.2-1999 _____Self-Retracting Devices for Personal Fall Arrest Systems• CAN/CSA Z259.2.3-1999 _____Descent Control DevicesNote: This Bulletin contains onlya general description of the productsshown. While uses and performancecapabilities are described, under nocircumstances shall the productsbe used by untrained or unqualifiedindividuals and not until theproduct instructions includingany warnings or cautions providedhave been thoroughly read andunderstood. Only they containthe complete and detailedinformation concerningproper use and care ofthese products.ID 2300-118-MC / Jan 2009© MSA 2009 Printed in U.S.A.Corporate HeadquartersP.O. Box 426, Pittsburgh, PA 15230 USAPhone 412-967-3000www.MSAnet.comU.S. Customer Service CenterPhone 1-800-MSA-2222Fax 1-800-967-0398MSA CanadaPhone 1-800-967-222Fax 1-800-967-0398MSA MexicoPhone 01 442 227 3900Fax 01 442 227 3943MSA InternationalPhone 412-967-3354FAX 412-967-3451Offices and representatives worldwideFor further information: