JDSU: Datasheet - CleanBlast System - Bench-top

COMMUNICATIONS TEST & MEASUREMENT SOLUTIONSCleanBlast System—Bench-topAdvanced Fiber Optic Connector End Face Cleaning SystemCleanBlast System—Bench-topwith Optional FBP Probe MicroscopeKey Features• Provides rapid, controlled, and repeatable cleaning andremoval of contamination from fiber end faces• Uses a precise non-contact air-solvent-air mixture/sequence to blast and remove contamination particles• Cleans faster, more effectively, and more economicallyper clean than conventional methods• Offers a comprehensive selection of precision cleaningtips and adapters• Input for FBP probe microscope and 6.4-inch LCDdisplay for fiber inspection capabilityApplications• Clean various types of both male(patch cord) and female (bulkhead)connector ends, including SC, FC,LC, ST, E2000, MPO, MTP®, MPX,MT, and SMA• Quickly and easily removecontamination, dust, lint, oil, andother forms of debris from fiberoptic end faces• Clean multiple configurationsand connector types withinterchangeable precision cleaningtips and adaptersCleanBlast SystemThe patented JDSU CleanBlast fiber end face cleaning systems provide a fast, effective,and cost-efficient solution for removing dirt and debris from connectors in mostcommon applications. CleanBlast is a non-contact system that uses a highly filteredstream of pressurized gas with a vacuum circuit to create a high flow rate jet acrossthe surface of the fiber. A 30-µl cleaning solvent is injected into the airflow, and thecontamination from the end face along with the solvent are then removed throughthe retrieval circuit. The precise, highly efficient non-contact air-solvent-air streamblasts and removes contamination with nearly 100-percent effectiveness.Non-Contact Cleaning IllustrationConnector Body Fiber Contamination Air-Solvent-Air Stream Cleaning TipWEBSITE: www.jdsu.com/inspect

CLEANBLAST SYSTEM—BENCH-TOP2Benefits• Fast, repeatable, more effective, andmore cost-efficient per clean thanother cleaning methods• Eliminates user sensitivity and error• Removes, rather than spreading orsmearing, loose debris from fiberend faces with a push of a button• Input for FBP probe microscopeand 6.4-inch LCD enable fiberinspection capability• Optional USB 1.1 output enablesoperation with basic FiberChek fiberanalysis softwareOverviewThe JDSU Bench-top CleanBlast systems include a base unit and a handset connectedto a 5-ft umbilical for reaching various application areas. Precision cleaning tips areavailable for both male (patch cord) and female (bulkhead) connectors for variousconnector types, including SC, LC, FC, ST, E2000, MPO, MPX, MT, and SMA. Allmodels include an input port for a separate probe microscope for fiber inspectioncapabilities, and a video output for connecting to an external monitor or to a mountedliquid crystal display (LCD). Digital systems feature an additional universal serial bus(USB) output for viewing the fiber image on a PC/laptop.The system’s cleaning solvent reservoir holds enough solution for at least 8,000cleaning cycles. The solvent refill process is simple and spill-resistant. A built-insafety feature prevents the handset from accidentally triggering the system. It alsomonitors solvent levels and the safety switch, and it features a series of light emittingdiodes (LEDs) to indicate system status.FCLT Cleaning TipsJDSU offers a complete selection of precisioncleaning tips and adapters for everyconnector and application, including SC, FC,ST, LC, MU, E2000, and MPO/MTP connectors.Bulkhead CleaningPatch Cord CleaningCleanBlast vs. Traditional Swab/StickBefore Clean AfterCleanBlastSwab/Stick

CLEANBLAST SYSTEM—BENCH-TOP3Components and FunctionsHandsetRelease Screws for CaseCleaning TipRun ButtonRelease Lever for Air FilterCompartmentAir Filter CompartmentCleaning Solvent RefillSystem Status LEDIndicatorsHandheld Handset w/5-ft UmbilicalFBP Probe Microscope(optional)CleanBlast—Bench-top SpecificationsCleanBlast System—Bench-topwith Optional Transceiver ModuleDimensionsWeightPower requirementsAir sourceSolvent consumptionMaintenanceVideo outputDigital outputCleaning cycle time40 x 33 x 18 cm (16 x 13 x 7 in)9.5 kg (21 lbs)100–240VAC, 2AmpExternal or nitrogen, regulated output 40 psi.At least 8,000 cleaning cycles per refill100,000 cycles per air filter change, 2 x 0.01 micron air filters requiredNTSC (BNC) or DIN connector to optional LCDOptional USB 1.1 output (includes USB cable and FiberChek software)1 second

CLEANBLAST SYSTEM—BENCH-TOPOrdering InformationFCL-B1000FCL-B1000-22FCL-B1000-EUFCL-B1000-UKFCL-B1100FCL-B1100-EUFCL-B1100-UKFCL-B2000FCL-B2000-22FCL-B2100FCL-B2100-EUFCL-B3000FCL-B4000FCL-B4000-EUFCL-B4100FCL-B4100-EUFCL-B5000FCL-B5100FCL-B5100-EUFCL-B6000FCL-B6100CleanBlast–bench-top with 5-ft umbilical bulkhead handset; universal 2.5 mm cleaning tipCleanBlast–bench-top with 22-ft umbilical bulkhead handset;universal 2.5 mm cleaning tipCleanBlast–bench-top with 5-ft umbilical bulkhead handset;universal 2.5 mm cleaning tip; EU power supplyCleanBlast–bench-top with 5-ft umbilical bulkhead handset;universal 2.5 mm cleaning tip; UK power supplyCleanBlast–bench-top with 5-ft umbilical bulkhead handset; USB 1.1 output;universal 2.5 mm cleaning tipCleanBlast–bench-top with 5-ft umbilical bulkhead handset; USB 1.1 output;universal 2.5 mm cleaning tip; EU power supplyCleanBlast–bench-top with 5-ft umbilical bulkhead handset; USB 1.1 output;universal 2.5 mm cleaning tip; UK power supplyCleanBlast–bench-top with 5-ft umbilical 90-degree bulkhead handset;universal 2.5 mm cleaning tipCleanBlast–bench-top with 22-ft umbilical 90-degree bulkhead handset;universal 2.5 mm cleaning tipCleanBlast–bench-top with 5-ft umbilical 90-degree bulkhead handset; USB 1.1 output;universal 2.5 mm cleaning tipCleanBlast–bench-top with 5-ft umbilical 90-degree bulkhead handset; USB 1.1 output;universal 2.5 mm cleaning tip; EU power supplyCleanBlast–bench-top with 5-ft umbilical bulkhead handset;universal 2.5 mm bulkhead cleaning tip and patch cord adapterCleanBlast–bench-top with 5-ft umbilical bulkhead handset;universal 2.5 mm patch cord adapterCleanBlast–bench-top with 5-ft umbilical bulkhead handset;universal 2.5 mm patch cord adapter; EU power supplyCleanBlast–bench-top with 5-ft umbilical bulkhead handset; USB 1.1 output;universal 2.5 mm patch cord adapterCleanBlast–bench-top with 5-ft umbilical bulkhead handset; USB 1.1 output;universal 2.5 mm patch cord adapter; EU power supplyCleanBlast–bench-top with 5-ft umbilical bulkhead handset; transceiver module;FBP-P5 probe microscopeCleanBlast–bench-top with 5-ft umbilical bulkhead handset; USB 1.1 output;transceiver module; FBP-P505 probe microscopeCleanBlast–bench-top with 5-ft umbilical bulkhead handset; USB 1.1 output;transceiver module; FBP-P505 probe microscope; EU power supplyCleanBlast–bench-top with backplane cleaning wandCleanBlast–bench-top with backplane cleaning wand; USB 1.1 outputTest & Measurement Regional SalesNORTH AMERICATOLL FREE: 1 866 228 3762FAX: +1 301 353 9216LATIN AMERICATEL: +1 954 688 5660FAX: +1 954 345 4668ASIA PACIFICTEL: +852 2892 0990FAX: +852 2892 0770EMEATEL: +49 7121 86 2222FAX: +49 7121 86 1222www.jdsu.com/inspectProduct specifications and descriptions in this document subject to change without notice. © 2009 JDS Uniphase Corporation 30162623 000 0209 FCLB.DS.FIT.TM.AE February 2009