ViconNet Version 6 Data Sheet - Vicon

Data/Spec SheetViconNet Version 6 Video Management System• Proven solution with thousands of successful installationsworldwide• Open Platform Video Management System that works on awide range of computer products• Available pre-configured on factory-certified computers• Seamless integration of analog and network cameras.• Extensive integration with third-party technologies such asaccess control and video analytics.• Unlimited cameras, servers, & locations• Distributed architecture with failover design• Web client and PC based application interface options• No complicated IP camera registration based on MAC ID• Independent live/recording frame rates and resolutionsKey Features of Version 6ViconNet® 6, Vicon’s fully scalable, feature-rich VMS solution, deliversenterprise-level performance along the ability to customize the systemand compatibility with a wide range of commercial off-the-shelf (COTS)network video and computer hardware. Distributed architecture allowsViconNet to support an unlimited number of cameras, locations andusers with no single point of failure. The result is a system optimized foryour needs, with your choice of components, that delivers consistentperformance and reliability.Integrate Web-Based ContentView web pages or any other type of web-based information such asHTML or a PDF documents from within ViconNet’s interface. Weather,news or traffic reports and emergency facility operating procedures arejust a few examples of content that can be easily accessed.Web ClientThe ViconNet web browser user interface runs on any of the popularweb browsers and provides live viewing, playback and PTZ controls.View and control these functions from any PC or laptop connected tothe Internet.Easy ArchivingViconNet’s new Archive Wizard enables you to easily create authenticatedarchives that save to a desired location, including removable media, foruse as forensic evidence. Play the archived video on any PC using theembedded player.Unique Video VaultManage your long-term storage more efficiently by allowing any alarmtaggedvideo to be saved to a separate database where it cannot beoverwritten by the system. This includes video corresponding to motiondetection, video loss or other events identified by integrated accesscontrol software.Enhanced Audit Logs and Authorization RightsGenerate immediate reports on alarm history, device status, recordingverification, failure notification, events and more. Send authorizationsettings to other work stations so they do not have to be programmedseparately. Create new user groups for authorization and copy settingsfrom other groups to expedite and simplify the process.Enhanced Macro FunctionalityRun applications such as web pages, documents, spreadsheets andexecutable files from within ViconNet. Create batch files to run multipleapplications.www.vicon-security.com

ViconNet 6SpecificationsWorkstation RequirementsHardware: 2.66 dual-core processor, 2 GB of RAM and 5GB of disk space. Workstations are availablefrom Vicon or may be COTS equipment.Operating System: Microsoft® Windows® XP Professional 32or 64-bit; Microsoft Vista 32-bit; MicrosoftWindows 7 Professional 32 or 64-bit;Windows 2003 or 2008 Server.Functions and FeaturesCompression:Transmission:Displays:Third Party CameraSupport:Main WindowScreen:H.264, ViconNet optimized MPEG-4 andJPEG (Normal and Full).Unicast and multicast.Supports 16 x 9 and 16 x 10 wide screen aswell as 4 x 3 standard viewing at a variety ofresolutions.List available at vicon-security.com/camsupport.A multi-channel display area containing upto 16 connected cameras and microphonesand all necessary controls to operate and setup the system.Graphical Map: Supports realistic camera location (aWorkstation with a dual output VGA willallow showing the map on a dedicatedmonitor while viewing video on the other).Site List:A physical list of all known networkSite areas and connected cameras andmicrophones.Play From Time: Call up images from any database on thenetwork from Main Screen.Navigator Window: A graphical display of recorded video. Itcontains a set of function buttons used toaccess the video on-screen.Network and SitesConfiguration:Macro Capabilities:DeviceConfiguration:AuthorizationRights Setup:Log Reporting:Allows administrator to set up all IP addressinformation and a system Nucleus andBackup Nucleus.Macros can be defined for recorded ordisplayed/played cameras, microphones andrelated devices (sensors).Devices can be configured for systemrecognition and operation.Group rights can be configured by specificsite and user. Rights provide authority toperform limited or all system functions.Continuously running activity log.Alarm Capabilities:Storage DatabaseUtilities:Authentication:Central FailureNotification (CFN):Events ManagementSystem (EVM):Museum Search:RecordingVerificationSystem:Archive Wizard andPlayer:Video Vault:Authorization Copyand Duplicate:Enhanced Logs:Camera Licensing:Alarms can be programmed to annunciateunder special conditions.Allows setup and usage of detected harddisks locally, including high-capacity iSCInetwork storage devices.ViconNet uses a 128-bit MD5 type videoauthentication algorithm to verify exportedvideo data integrity.Fault reporting system that providesapplication and hardware failure informationto all DVRs and NVRs connected to thesystem.Enables ViconNet to interface with anexternal system’s database, for example, anaccess control, point-of-purchase, intrusionmonitoring or license plate recognition (LPR)system.Enables an operator to define a regionwithin a specific Vicon camera’s field-ofview,for example, a door, for indexing. Thisaccelerates searching for a specific incident.Ensures continuous recording by notifyingusers of any recording errors, both locallyand over the network.Creates authenticated archives and savesto any location or removable media.. Thevideo clip is playable using the embeddedViconNet player.Allows any event that was tagged as analarm (VMD, video loss, dry contact or fromthe Events Management system) to be savedto a separate database, where it cannot beoverwritten by the system.Provides the ability to send authorizationsettings to other Workstations so they donot have to be programmed separately.Logs that are exported from ViconNet alsocontain Windows and setup logs, providingmore troubleshooting information whendiagnosing system problems.No fees for Vicon cameras. No complex IPcamera registration process.Data Sheet Number: V219Dated: 02/2011Vicon Data Sheet Part Number: 8009-7219-00-00Specifications subject to change without notice.Vicon, and ViconNet and their logos are registered trademarks of ViconIndustries Inc.Microsoft and Windows are registered trademarks of MicrosoftCorporation.Copyright © 2011 Vicon Industries Inc. All rights reserved.www.vicon-security.com

ViconNet 6Data/Spec SheetTypical ViconNet SystemIn a typical configuration, ViconNet manages encoded analog video stream inputs from hybrid DVRs and standalone encoders and IP video streamsfrom IP devices. All devices are connected to the network via a LAN, WAN or the Internet. With this configuration, ViconNet can direct videoto any workstation, NVR or DVR on the network or a laptop or PC connected to the Internet running the ViconNet software or the web browserversion of ViconNet. In addition, a Virtual Matrix Display Controller can be added to the system to provide multiple display options and the abilityto control video walls.ViconNet is available as a complete VMS system loaded on factory-certified hardware optimized for seamless operation and integration with accesscontrol and other security management systems. This includes a full complement of NVRs, workstations, DVRs, RAID storage devices, camerasand edge devices. Listed below are some key system components. Refer to www.vicon-security.com for more information.DescriptionKollector Series Hybrid Digital Video Recorders preloaded with ViconNet. Kollector Strike andForce models offer frame rates from 60 to 480 fps, 16 analog inputs, 8 IP camera support, avariety of storage options including internal or external RAID and MPEG-4, MJPEG or H.264compression.NVRs and Workstations preloaded with ViconNet. NVR models in both tower and rack versionsoffer a variety of storage options including internal or external RAID and MPEG-4, MJPEG orH.264 compression. Workstations provide the same capability but no recording ability.Virtual Matrix Display Controller. The VMDC provides a scalable matrix control solution for smalland large installations. Available in tower and rack configurations, The VMDC is comprised ofboth a matrix command/control center software interface and a hardware decoding componentthat enables the remote network video streams to be displayed on multiple monitors in multiplelocations.Network Control Keypad. Used to control ViconNet digital video management systems,including Virtual Matrix Controller (VMC) over an IP network or serial connection.Model NumberKFX-XXXXV6KSX-XXXXV6VN-NVR-XXXXV6VN-WS-PCV6VMDC-XX seriesV1500X-SCCS-1External Storage Options. Vicon offers a variety of external storage options using SAN andother technologies.-ViconNet Web Server. Allows authorized security managers and operators to select and controlvideo displayed from a browser-based interface. Available in tower or rack (R) configuration.VN-WEB-SYSTEMorVN-WEB-SYSTEM-Rwww.vicon-security.com

ViconNet 6Ordering InformationSoftware and LicensingNetwork Video Recording Software and LicensesViconNet 6 NVR software single server license.ViconNet Multi-Pack; 10 user license pack of VN-NVR V6 software.ViconNet NVR single server license; 30-day evaluation version.Workstation Remote Operator SoftwareViconNet Remote Operator Workstation software. Single site license.ViconNet Multi-Pack; 10 user license pack of VN-WS V6 software.ViconNet 6 Basic Remote Operator software site license.Web Server SoftwareViconNet Web Server single server software license (new).Nucleus SoftwareViconNet 6 Nucleus/Web server single server software license (new).Model NumberVN-NVR-SWV6VN-NVRV6-10VN-NVR-30V6Model NumberVN-WS-SWV6VN-WSV6-10VN-VIEWERV6-16Model NumberVN-WEB-SWModel NumberVN-NUC-SWV6Software Upgrades from Prior ViconNet VersionsA Software Upgrade is a one-time purchase and does not entitle the user to additional product upgrades. Refer to the ViconNet Version 6 UpgradeGuidelines Product Fact Sheet PF-219 for more information.DescriptionViconNet V6 NVR Software Single Server License Upgrade.ViconNet V6 Kollector DVR Software Single DVR License Upgrade.ViconNet V6 Workstation Software Single Workstation License Upgrade.VMDC Single Workstation Software UpgradeModel NumberVN-NVR-SWV6-UPGRADEVN-DVR-SWV6-UPGRADEVN-WS-SWV6-UPGRADEVMDC-SW-UPGRADESoftware Maintenance AgreementA Software Maintenance Agreement entitles the user free access to product upgrades. The contract runs one or more years and may be purchasedalong with the product or if a Product Upgrade is purchased. Refer to the ViconNet Version 6 Upgrade Guidelines Product Fact Sheet PF-219 formore information.DescriptionViconNet V6 NVR Software Annual Maintenance Agreement.ViconNet V6 Kollector Software Annual Maintenance Agreement.ViconNet V6 Workstation Software Annual Maintenance Agreement.ViconNet V6 Nucleus Software Annual Maintenance AgreementVMDC Single Workstation Annual Maintenance AgreementModel NumberVN-NVR-SWV6-MAINTVN-DVR-SWV6-MAINTVN-WS-SWV6-MAINTVN-NUC-SWV6-MAINTVMDC-SW-MAINTwww.vicon-security.com