Chemwatch Australian MSDS 4667-10 - FUJIFILM Australia

products.fujifilm.com.au

Chemwatch Australian MSDS 4667-10 - FUJIFILM Australia

FUJIFILM MULTI PURPOSE WHITE LB021Chemwatch Independent Material Safety Data SheetIssue Date: 30-May-2012 CHEMWATCH 4667-10X9317SP(cs)Version No:5.1.1.1CD 2012/2 Page 5 of 7Section 9 - PHYSICAL AND CHEMICAL PROPERTIESVolatile Component (%vol) Not Available Evaporation Rate Not AvailableSection 10 - STABILITY AND REACTIVITYCONDITIONS CONTRIBUTING TO INSTABILITY• Presence of incompatible materials.• Product is considered stable.• Hazardous polymerisation will not occur.For incompatible materials - refer to Section 7 - Handling and Storage.Section 11 - TOXICOLOGICAL INFORMATIONPOTENTIAL HEALTH EFFECTSACUTE HEALTH EFFECTSSWALLOWED■ The material has NOT been classified by EC Directives or other classification systems as "harmful by ingestion". This isbecause of the lack of corroborating animal or human evidence. The material may still be damaging to the health of the individual,following ingestion, especially where pre-existing organ (eg. liver, kidney) damage is evident. Present definitions of harmful ortoxic substances are generally based on doses producing mortality rather than those producing morbidity (disease, ill-health).Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificantquantities is not thought to be cause for concern.EYE■ Although the liquid is not thought to be an irritant (as classified by EC Directives), direct contact with the eye may producetransient discomfort characterised by tearing or conjunctival redness (as with windburn).SKIN■ The liquid may be miscible with fats or oils and may degrease the skin, producing a skin reaction described as non-allergiccontact dermatitis. The material is unlikely to produce an irritant dermatitis as described in EC Directives .Entry into the blood-stream, through, for example, cuts, abrasions or lesions, may produce systemic injury with harmful effects.Examine the skin prior to the use of the material and ensure that any external damage is suitably protected.INHALED■ The material is not thought to produce adverse health effects or irritation of the respiratory tract (as classified by ECDirectives using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and thatsuitable control measures be used in an occupational setting.CHRONIC HEALTH EFFECTS■ Skin contact with the material is more likely to cause a sensitisation reaction in some persons compared to the generalpopulation.There is some evidence that inhaling this product is more likely to cause a sensitisation reaction in some persons compared tothe general population.Substance accumulation, in the human body, may occur and may cause some concern following repeated or long-term occupationalexposure.TOXICITY AND IRRITATION■ Contact allergies quickly manifest themselves as contact eczema, more rarely as urticaria or Quincke's oedema. The pathogenesisof contact eczema involves a cell-mediated (T lymphocytes) immune reaction of the delayed type. Other allergic skin reactions,e.g. contact urticaria, involve antibody-mediated immune reactions. The significance of the contact allergen is not simplydetermined by its sensitisation potential: the distribution of the substance and the opportunities for contact with it areequally important. A weakly sensitising substance which is widely distributed can be a more important allergen than one withstronger sensitising potential with which few individuals come into contact. From a clinical point of view, substances arenoteworthy if they produce an allergic test reaction in more than 1% of the persons tested.No dataEcotoxicitySection 12 - ECOLOGICAL INFORMATIONcontinued...


FUJIFILM MULTI PURPOSE WHITE LB021Chemwatch Independent Material Safety Data SheetIssue Date: 30-May-2012 CHEMWATCH 4667-10X9317SP(cs)Version No:5.1.1.1CD 2012/2 Page 6 of 7Section 12 - ECOLOGICAL INFORMATIONIngredient Persistence: Persistence: Air Bioaccumulation MobilityWater/Soilbis(2- ethylhexyl) maleate LOW No Data LOW LOWAvailable4, 4' - oxydibenzenesulfonyl HIGH No Data LOW MEDhydrazideAvailableSection 13 - DISPOSAL CONSIDERATIONS• Containers may still present a chemical hazard/ danger when empty.• Return to supplier for reuse/ recycling if possible.Otherwise:• If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used tostore the same product, then puncture containers, to prevent re-use, and bury at an authorised landfill.• Where possible retain label warnings and MSDS and observe all notices pertaining to the product.Legislation addressing waste disposal requirements may differ by country, state and/ or territory. Each user must refer to lawsoperating in their area.A Hierarchy of Controls seems to be common - the user should investigate:• Reduction.• DO NOT allow wash water from cleaning or process equipment to enter drains.• It may be necessary to collect all wash water for treatment before disposal.• In all cases disposal to sewer may be subject to local laws and regulations and these should be considered first.• Where in doubt contact the responsible authority.• Recycle wherever possible.• Consult manufacturer for recycling options or consult local or regional waste management authority for disposal if no suitabletreatment or disposal facility can be identified.• Dispose of by: burial in a land-fill specifically licenced to accept chemical and / or pharmaceutical wastes or incineration ina licenced apparatus (after admixture with suitable combustible material).• Decontaminate empty containers. Observe all label safeguards until containers are cleaned and destroyed.Section 14 - TRANSPORTATION INFORMATIONHAZCHEM:None (ADG7)NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS: ADG7, UN, IATA, IMDGSection 15 - REGULATORY INFORMATIONPOISONS SCHEDULE NoneREGULATIONSRegulations for ingredientsbis(2-ethylhexyl) maleate (CAS: 142-16-5) is found on the following regulatory lists;"Australia Inventory of Chemical Substances (AICS)","OECD List of High Production Volume (HPV) Chemicals"4,4'-oxydibenzenesulfonyl hydrazide (CAS: 80-51-3) is found on the following regulatory lists;"Australia Inventory of Chemical Substances (AICS)","Australia National Pollutant Inventory","OECD List of High Production Volume(HPV) Chemicals"No data for Fujifilm Multi Purpose White LB021 (CW: 4667-10)Section 16 - OTHER INFORMATIONDenmark Advisory list for selfclassification of dangerous substancesSubstance CAS Suggested codesbis(2- ethylhexyl) maleate 142- 16- 5 R434, 4' - oxydibenzenesulfonyl hydrazide 80- 51- 3 Carc3; R40Mut3; R68 Xn;continued...


FUJIFILM MULTI PURPOSE WHITE LB021Chemwatch Independent Material Safety Data SheetIssue Date: 30-May-2012 CHEMWATCH 4667-10X9317SP(cs)Version No:5.1.1.1CD 2012/2 Page 7 of 7Section 16 - OTHER INFORMATION■ Classification of the preparation and its individual components has drawn on official and authoritative sources as well asindependent review by the Chemwatch Classification committee using available literature references.A list of reference resources used to assist the committee may be found at:www.chemwatch.net/references.■ The (M)SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whetherthe reported Hazards are Risks in the workplace or other settings.R22This document is copyright. Apart from any fair dealing for the purposes of private study, research, review orcriticism, as permitted under the Copyright Act, no part may be reproduced by any process without writtenpermission from CHEMWATCH. TEL (+61 3) 9572 4700.Issue Date: 30-May-2012Print Date: 30-May-2012This is the end of the MSDS.

More magazines by this user
Similar magazines