Drawings

freeplotting.com
  • No tags were found...

Drawings

G:\11000-11999\11800-11899\11882\11882 E1.1.dwg, 1/3/2012 2:15:15 PM, Carl Shelton


G:\11000-11999\11800-11899\11882\11882 E2.1.dwg, 1/3/2012 2:15:18 PM, Carl SheltonX3507 TON UNIT3458 TON UNIT


G:\11000-11999\11800-11899\11882\11882 E3.1.dwg, 1/3/2012 2:15:23 PM, Carl Shelton


PANEL H (EXISTING) VOLTAGE 480 PHASE 3 WIRE 4 LOCATION BACK WALL OF TENANT SPACESOURCE LL SWITCHGEAR 225A/MLO# L R M N H C BREAKER DESCRIPTIONKVA/PHASEBREAKERAMP POLE A B C DESCRIPTIONAMP POLEL R M N H C #1 20 1 SPARE 0.0 SPARE 20 1 23 20 1 SPARE 0.0 SPARE 20 1 45 20 1 SPARE 0.0 SPARE 20 1 67 0.0 89 0.0 1011 0.0 1213 15.5 RTU-1 60 3 15.5 1415 15.5 (3)#4, (1)#10 GND. IN 1-1/4" C. -- -- 15.5 1617 15.5 -- -- -- -- 15.5 1819 15.5 RTU-2 60 3 15.5 2021 15.5 (3)#4, (1)#10 GND. IN 1-1/4" C. -- -- 15.5 2223 15.5 -- -- -- -- 15.5 2425 18.3 75 KVA TRANSFORMER 125 3 8.4 3.8 1.1 2.8 2.1 0.0 2627 18.3 -- -- -- -- 8.4 3.8 1.1 2.8 2.1 0.0 2829 35 3 SPARE 18.3 -- -- -- -- 8.4 3.8 1.1 2.8 2.1 0.0 3031 -- -- 0.0 3233 -- -- 0.0 3435 0.0 3637 0.0 SPARE 70 3 3839 0.0 -- -- 4041 0.0 -- -- 42TOTAL CONNECTED LOAD/PH 49.3 49.3 49.3 H = PROVIDE HACR RATED BREAKER.SUB-FED PANEL 0.00 S = PROVIDE SWITCHING DUTY RATED BREAKER.TOTAL CONNECTED LOAD 147.79 L = PROVIDE A LOCKABLE BREAKERL = LIGHT DEMAND 125% 31.5 KVA G = PROVIDE A GFI BREAKER.R = RCPT FIRST 10KVA AT 100% AND REMAINING AT 50% 10.7 KVA IG = PROVIDE AN ISOLATED GROUNDM = MISC DEMAND 125% 4.1 KVAN = MISC NON-CONTINOUS DEMAND 100% 8.5 KVA COMMENTSH = HEAT DEMAND 100% IF H>C, 0% IF H


G:\11000-11999\11800-11899\11882\11882 ES2.dwg, 1/3/2012 2:15:55 PM, Carl Shelton


ADJACENT TENANTX


ADJACENT TENANT


ADJACENT TENANT

More magazines by this user
Similar magazines