TEC SOFT-CLOSE - Grass America, Inc.

TEC SOFT-CLOSETEC SOFT-CLOSE HINGE SYSTEMSA revolutionary Soft-close face frame hinge system.Established quality with functional benefits for today’smodern cabinetry.www.grassusa.com

The perfect solution for your face frame cabinetry. TECSOFT-CLOSE, with adjustable closing action from Grass.Now with adjustable closing force.Quiet and effortless closing action isguaranteed every time with TECSoft-close hinges. Sleek in design, theTEC Soft-close features a newadjustable switch to regulate your softclosingaction. Now your closing actioncan be consistent for any size door.Made in the USA, the TEC Soft-closesystem offers a proven technology thatmakes TEC the first choice among faceframe hinge systems.

TEC SOFT-CLOSE HINGE SYSTEMA three tiered adjustment switchenables you to regulate the closingaction of the door. These levels ofadjustment provide a different levelresistance on the damping system inthe soft-close mechanism.MADE IN THE USA.TEC Soft-close - the unique faceframe hinge with adjustable softclose actionThe TEC Soft-close hinge system is arevolutionary face frame hinge with thesoft-closing action built right in to thehinge cup. Now introducing the newestfeature of the TEC Soft-close, anadjustment switch located on the faceof the hinge that will regulate theclosing action of the door. IntegratedSoft-close combined with newadjustments gives you new functionalbenefits for today’s modern cabinetry.Made in the USA, your doors will closesoftly, quietly and consistently withTEC Soft-close.Innovative three tiered adjustment.The newest feature of the TEC Softclosehinge system is a three tieredadjustment switch that enables you toregulate the closing action of the door.These three levels of adjustment providea different level of resistance on thedamping system in the soft-closemechanism. Set at the highest level, thedamping system has the most resistanceand provides the longest closing action.To achieve less resistance you can placethe adjustment switch at the mediumlevel or lower level. The settings can bedifferent for each hinge on the door sothat you can achieve the maximumbenefit in your closing action regardlessof the size or weight of the door.The development of the TEC Softcloseis based on the ever popular 3-dimensional TEC face frame hinge witha variety of overlays offered. The Softclosemechanism is pre-mounted in tothe interior of the hinge cup, therefore,no additional installation of the Softcloseis required. The drilling depth ofthe cup remains at 11mm and thereare no protruding parts in the interiorof the cabinet. Made in the USA, theTEC Soft-close offers quiet andeffortless closing action every time.3

Grass TEC Soft-closeTable of ContentOpening angle Drill hole DescriptionFull overlay PageTEC Soft-close Technical info5108°35 mmTEC Soft-close1/4” to 1” overlay42 mm and 45 mm boring patternsHeightSideDepth6108°35 mmTEC Soft-close1 1/4” to 1 1/2” overlay42 mm and 45 mm boring patternsHeightSideDepth8Machinery• Ecopress• Drill bits10Accessories• Insertion Dies• Spacers• Screws114

Technical informationfor TEC Soft-close hingesThere are numerous variables that will determine the choice ofhinge. Determine the requirements of the application. Considerthe following points based on the door to cabinet application.1234Door overlayBase plate mounting to face frame:a. Wrap-around - 3 ⁄4” thick frames onlyb. Side mount - frames thicker than 3 ⁄4”Door clearance/hinge arm clearance(for interior rollout trays)Door gap - distance between face frame and the back ofthe closed door567Minimum reveal - distance between two doors hingedback-to-backDoor thickness - thicker doors can restrict opening angleand minimum revealHinge cup boring pattern for dowelled hingesNumber of hinges per doorThe number of hinges is determined by the door height, doorweight, quality of the material and the fixing of the cup andmounting plate.The load and height data refer to 24" standard door widths.96"84"2 3 4 5The table refers to hinges with and without integrated dampers.Grass strongly recommends a trial mount for all hinges andbase plates.Example:For doors measuring 56" x 24" andweighing 19 lbs., Grass recommends theinstallation of 3 hinges.63"56"35"24"Note: The distance between the top and bottom hinge must begreater than the width of the door.24"The TEC Soft-close hinge meets and exceeds the minimumrequirements of ANSI/BHMA A156.9 standard.inchespounds15 20 3045 60All-steel ConstructionTEC hinges feature a solid metal hinge cup. All moving mechanismparts, including pivot pins, linkages and springs are hardened toensure long-term durability.Shallow Cup DepthTEC hinges feature a shallow 11mm [ 7 ⁄16”] cup toaccommodate profiled door edge. There are no protruding partsfrom the hinge cup.Interchangeable with TEC Self-closeTEC Soft-close has the same boring pattern as the TEC Self-closeso no change is necessary in your existing setup.AdjustmentA three tiered adjustment switch allows various levels of resistancein the damping system.Integrated Soft-closeThe Soft-close damper is pre-mounted in the hinge cup. No additionalinstallation of the Soft-close is required.Made in the USAThe TEC Soft-close hinges are manufactured at the Grass facilityin Kernersville, NC.5

Grass TEC Soft-closeFeatures and BenefitsTEC Soft-close is Made in the USA of durable and long-lastingmaterials from time-tested design and manufacturing techniques.Every mechanism is tested for reliability and the user experience.TEC Soft-close hinges are offered in these overlays:1⁄4”, 7 ⁄16”, 1 ⁄2”, 3 ⁄4” 1”, 1 1 ⁄4”, 1 5 ⁄16” 1 3 ⁄8”, 1 1 ⁄2”• 3-dimensional adjustment is built into each hinge.Settings for height, side and depth as well astension for the soft-close mechanism makesinstallation a breeze.• With its unique damping system,quiet and effortless closing actionis guaranteed every time with theTEC Soft-close Hinge• Low profile cup allows shallowdrilling depth - 11 mm (7/16”)• Adjustable Soft-close damper is integrated intoeach hinge cup and there are no protruding partsin the interior of the cabinet.MADE IN THE USA6

Technical informationfor TEC Soft-close hingesTEC Soft-close hinges are more convenient than ever. Each hinge isadjustable to fit any door, and close to any pressure.3 211Side AdjustmentRotate cam adjustment screw.2Height AdjustmentLoosen screw, align door, tighten screw.3Depth AdjustmentRotate cam screw.44Soft-close Tension.........Light, Medium and Strong settingsLIGHT1This is the “Light” setting for the Soft-closing mechanism. Sethere for light or small doors with very little closing pressure.1MEDIUM2This is the “Medium” setting for the Soft-closing mechanism. Sethere for average size doors with normal closing pressure.2STRONG3This is the “Strong” setting for the Soft-closing mechanism. Sethere for larger or heavier doors with a strong closing pressure.(Factory Setting)3Note: To reset the Soft-close damper, move the adjustmentswitch to “Strong”, then to the desired position. Close the doorand the Soft-close will be reset.7

TEC Soft-close108° Opening Angle - 1 ⁄4” to 1” OverlayFace Frame Hinges with integrated Soft-close• Soft-close damper is premounted in the hinge cup• Adjustment switch to regulate closing action• One piece hinge and base plate combination• 3 dimensional adjustment• 11 mm (7/16”) cup drilling depth• Front locating tabs position hinge on face frame• Cam side adjustment• Cam depth adjustment• Height adjustment at mounting screw• Works with current Grass insertion machinery• Made in the USANoHammerSide-mount - 42mm drilling patternOverlay Door Clearance Arm Clearance Dowelled Hinge Cup (VS8)mm [inch] mm [inch] mm [inch] Description Item No. PU12.7 [ 1 ⁄2”] 3.5 [ 1 ⁄8”] 11 [ 7 ⁄16”] TEC 864-VS8-42U 1/2 SM A-SC 02749A-15 300Wrap-around - 42mm drilling patternOverlay Door Clearance Arm Clearance Dowelled Hinge Cup (VS8)mm [inch] mm [inch] mm [inch] Description Item No. PU6 [ 1 ⁄4”] 11 [ 7 ⁄16”] 14.5 [ 9 ⁄16”] TEC 864-VS8-42U 1/4 WM A-SC 02788A-15 30011[ 7 ⁄16”] 5.1 [ 13 ⁄64”] 11 [ 7 ⁄16”] TEC 864-VS8-42U 7/16 WM A-SC 02809A-15 30012.7 [ 1 ⁄2”] 3.5 [ 1 ⁄8”] 11 [ 7 ⁄16”] TEC 864-VS8-42U 1/2 WM A-SC 02824A-15 30019 [ 3 ⁄4”] 0 11 [ 7 ⁄16”] TEC 864-VS8-42U 3/4 WM A-SC 02825A-15 30025 [1”] 0 11 [ 7 ⁄16”] TEC 864-VS8-42U 1 WM A-SC 02834A-15 300Side-mount - 45mm drilling patternOverlay Door Clearance Arm Clearance Dowelled Hinge Cup (VS8)mm [inch] mm [inch] mm [inch] Description Item No. PU12.7 [ 1 ⁄2”] 3.5 [ 1 ⁄8”] 11 [ 7 ⁄16”] TEC 864-VS8-45U 1/2 SM A-SC 02750A-15 300NoHammerWrap-around - 45mm drilling patternOverlay Door Clearance Arm Clearance Dowelled Hinge Cup (VS8) Screw-on Hinge Cup (VS)mm[inch] mm [inch] mm [inch] Description Item No. PU Description Item No. PU6 [ 1 ⁄4”] 11 [ 7 ⁄16”] 14.5 [ 9 ⁄16”] TEC 864-VS8-45U 1/4 WM A-SC 02791A-15 300 TEC 864-VS-45U 1/4 WM A-SC 04429A-15 30011[ 7 ⁄16”] 5.1 [ 13 ⁄64”] 11 [ 7 ⁄16”] TEC 864-VS8-45U 7/16 WM A-SC 02858A-15 300 TEC 864-VS-45U 7/16 WM A-SC 02670A-15 30012.7 [ 1 ⁄2”] 3.5 [ 1 ⁄8”] 11 [ 7 ⁄16”] TEC 864-VS8-45U 1/2 WM A-SC 02870A-15 300 TEC 864-VS-45U 1/2 WM A-SC 04431A-15 30019 [ 3 ⁄4”] 0 11 [ 7 ⁄16”] TEC 864-VS8-45U 3/4 WM A-SC 02875A-15 300 TEC 864-VS-45U 3/4 WM A-SC 04432A-15 30025 [1”] 0 11 [ 7 ⁄16”] TEC 864-VS8-45U 1 WM A-SC 02745A-15 300 TEC 864-VS-45U 1 WM A-SC 04441A-15 300PU = packaging unit8 www.grassusa.com Dimensions in millimeters, fractional inch equivalents as noted.

Dimensions - door closedMinimum RevealDoor open - clearances4.9[3/16”]Overlay#10 x 3/4” panhead screw9.5[3/8”]ArmClearance8.5[11/32”]DoorThicknessMin.11[7/16”]2.5[3/32”]20[25/32”]Min.Reveal108°DoorClearanceTEC 864 Minimum RevealDoor Thickness 16 [ 5 ⁄8”] 17.5 [ 11 ⁄16”] 19 [ 3 ⁄4”]Minimum Reveal 4.2 [ 5 ⁄32”] 5.4 [ 7 ⁄32”] 6.7 [ 1 ⁄4”]Based on door with square edge.Maximum DoorThickness 19 [3/4”]Arm and Door clearances see Page 8.AdjustmentDimensions1Side Adjustment ......+/-1.5mm [ 1 ⁄16”]Rotate cam adjustment screw.Overall Dimensions2Height Adjustment.......+/-2mm [ 3 ⁄32”]Loosen screw, align door, tighten screw.5[3/16”]34Depth Adjustment.........+ 2.5mm [ 3 ⁄32”], - .5mm [ 1 ⁄32”]Rotate cam screw.Soft-close Tension.........Light, Medium and Strong settingSee page 7 for complete adjustment explanation.PatentPending10[3/8”]7[9/32”]39[1 9/16”]57[2 1/4”]Mounting ScrewsHinge cup to door, #6 x 5 ⁄8” Flat head screwBase plate to face frame, #10 x 3 ⁄4” Pan head screwBase platesDrilling Pattern42mm drilling pattern45mm drilling patternWrap-aroundBase PlateSide-mountBase PlateIMPORTANTTo determine the correct application, Grassstrongly recommends a trial mounting forall hinges and base plates.20[25/32”]2.5[3/32”]Ø35[1 3/8”]11[7/16”]42[1 21/32”]Ø8[5/16”]20[25/32”]2.5[3/32”]Ø35[1 3/8”]9.5[3/8”]45[1 25/32”]Ø8[5/16”]Subject to technical modifications without notice. 9

TEC Soft-close108° Opening Angle - 1 1 ⁄4” to 1 1 ⁄2” OverlayFace Frame Hinges with integrated Soft-close• Soft-close damper is premounted in the hinge cup• Adjustment switch to regulate closing action• One piece hinge and base plate combination• 3 dimensional adjustment• 11 mm (7/16”) cup drilling depth• Front locating tabs position hinge on face frame• Cam side adjustment• Cam depth adjustment• Height adjustment at mounting screw• Works with current Grass insertion machinery• Made in the USANo HammerSide-mount - 42mm drilling patternOverlay Door Clearance Arm Clearance Dowelled Hinge Cup (VS8)mm[inch] mm [inch] mm [inch] Description Item No. PU32 [1 1 ⁄4”] 0 10 [ 13 ⁄32”] TEC 864-VS8-42U 1 1/4 SM A-SC 02838A-15 300Wrap-around - 42mm drilling patternOverlay Door Clearance Arm Clearance Dowelled Hinge Cup (VS8)mm[inch] mm [inch] mm[inch] Description Item No. PU32 [1 1 ⁄4”] 0 10 [ 13 ⁄32”] TEC 864-VS8-42U 1 1/4 WM A-SC 02836A-15 30033.5 [1 5 ⁄16”] 0 10 [ 13 ⁄32”] TEC 864-VS8-42U 1 5/16 WM A-SC 02197A-15 30035 [1 3 ⁄8”] 0 10 [ 13 ⁄32”] TEC 864-VS8-42U 1 3/8 WM A-SC 02781A-15 30038 [1 1 ⁄2”] 0 10 [ 13 ⁄32”] TEC 864-VS8-42U 1 1/2 WM A-SC 02839A-15 300Side-mount - 45mm drilling patternOverlay Door Clearance Arm Clearance Dowelled Hinge Cup (VS8)mm[inch] mm [inch] mm [inch] Description Item No. PU32 [1 1 ⁄4”] 0 10 [ 13 ⁄32”] TEC 864-VS8-45U 1 1/4 SM A-SC 02780A-15 300No HammerWrap-around - 45mm drilling patternOverlay Door Clearance Arm Clearance Dowelled Hinge Cup (VS8) Screw-on Hinge Cup (VS)mm[inch] mm [inch] mm [inch] Description Item No. PU Description Item No. PU32 [1 1 ⁄4”] 0 10 [ 13 ⁄32”] TEC 864-VS8-45U 1 1/4 WM A-SC 02910A-15 300 TEC 864-VS-45U 1 1/4 WM A-SC 04547A-15 30033.5 [1 5 ⁄16”] 0 10 [ 13 ⁄32”] TEC 864-VS8-45U 1 5/16 WM A-SC 02198A-15 300 TEC 864-VS-45U 1 5/16 WM A-SC 02176A-15 30035 [1 3 ⁄8”] 0 10 [ 13 ⁄32”] TEC 864-VS8-45U 1 3/8 WM A-SC 02782A-15 300 TEC 864-VS-45U 1 3/8 WM A-SC 04548A-15 30038 [1 1 ⁄2”] 0 10 [ 13 ⁄32”] TEC 864-VS8-45U 1 1/2 WM A-SC 02805A-15 300 TEC 864-VS-45U 1 1/2 WM A-SC 04549A-15 300PU = packaging unit10 www.grassusa.com Dimensions in millimeters, fractional inch equivalents as noted.

EcopressDrilling and insertion machines for 45 mm boring pattern• Bore depth automatically adjusts to material thickness• Functional design• Accurate fence is easily adjusted• Chip removal by air on pneumatic machines• Easy, fast and efficient operation• Easy maintenanceEcopress Motor configurationItem No.110v single phase pneumaticF146077951299220v single phase pneumaticF146077952299220v three phase pneumatic 79520PU 1 pieceDrill BitsDiameter / DirectionItem No.35mm carbide - RH 00077-018mm carbide - LH 00160-01American bit set(1 x 35mm RH, 2 x 8mm LH)35mm carbide - RH(2-flute, no tip)00213-0100231-01PU 1 pieceExtension barsType From/Up to Item No.Type 1 - Ecopress 360 mm -1360 mm 37535-01Type 2 - Ecopress 1360 mm -2350 mm 37536-01Note: Extension bars can be used for left and right sidesPU 1 pieceTEC Hand Insertion Tool• Used for manual assembly for the TEC Soft-close hinge.Hand Insertion ToolTypeItem No.Insertion Die 03987-01PU 1 piecePU = packaging unit12 www.grassusa.com Dimensions in millimeters, fractional inch equivalents as noted.

Additional stops for EcopressTypeItem no.Left 89610-01Right 89510-01PU 1 pieceInsertion dies for TEC Soft-close1 2Insertion Dies (ID) For use with Ecopress & EcoflexDescriptionItem No.1 TEC Soft-close I/D 926172 TEC I/D Adapter* 61501PU 1 pieceNOTEPhoto shown with locator block removed. Makesure that the locator is removed before using withTEC Soft-close to prevent damage to the damper.*Adapter required for Ecoflex, M850, and M2500.Locator block and bolt need to be removed for Soft-close.Spacers1SpacersDescription Item No. PU1 860-048 1.5mm [ 1 ⁄16”] thick, without locating pins 00264-42 2002 32 860-076 1.5mm [ 1 ⁄16”] thick, slotted 00047-42 2003 1.5mm [ 1 ⁄16”] thick, hinge cup spacer 00284-42 200ScrewsScrewsDescription Item No. PU#6 x 1 ⁄2” Flat head, Nickel 81014-43 500#6 x 5 ⁄8” Flat head, Nickel 81001-43 500#8 x 3 ⁄4” Round head, Self-drilling, Zinc 81018-43 500#10 x 3 ⁄4” Pan head, Nickel 81007-43 500#8 x 5 ⁄8” Round head, Truss quad, self drilling, Zinc 81017-43 500PU = packaging unitSubject to technical modifications without notice. 13

Notes14 www.grassusa.com

Notes15

Grass America Inc.1202 NC Highway 66 SouthKernersville, NC 27284Phone 1-800-334-3512Fax 1-800-525-8406Internet: www.grassusa.comE-Mail: info@grassusa.comGrass Canada Inc.475 Finchdene Square, Unit 9Toronto, ON M1X 1B7Phone 1-800-461-4975Fax 1-416-335-5907Internet: www.grasscanada.comE-Mail: info@grasscanada.com#01298 - TSC - 10/11 - MAP - 7500www.grassusa.com