(pdf) - Nice Garage doors - Fagel

fagel.ee
  • No tags were found...

(pdf) - Nice Garage doors - Fagel

NiceGarage doorsThe most complete and innovativerange to automate garage doors.


A comprehensive rangeand compatible systems.Nice offers a comprehensive rangeof products: a wide range of systemsand products for the automation of gates,garages, shutters, barriers, awnings,shutters and now also alarm systems.All products are compatible with one anotherand easily integrated with existing systems.OutdoorFor Swing GatesRoad BarriersFor Lighting Systemsand For Irrigation SystemsDesignToday, Nice products are exhibitedin design and applied art museums,and were presented with anawards at the XIX Compassod’Oro, the most importantinternational eventin the design fi eld.


Increasingly innovative.The NRC systems and Nice Solemyo make installationof all automations both simple and economic,in new and restored buildings alike.Opera and BlueBUS simplify the installation,the programming and use of each automation.Solemyo is the kit for solarpower for the automationof gates, garage doorsand barrier gates.Installable anywhere withoutthe need for connectionsor excavations, even in the mostremote locations or those diffi cultto access with the power mains.Increased savings and respectfor the environmen thanksto solar energy, free and clean:an ecological and intelligentchoice with short term benefi ts.The NRC systems(Nice Radio Connection),avoiding the cost effortof building work or the installationof unsightly ducting for routingcontrol cables make theinstallation of any automationmuch simpler and economical,in new buildings, and all renovatedconstructions.Opera marks the futureof the automation.The innovative systemNice Opera makes the workfor the installer easier thanksto the remote control of anyautomation system via PCand PDA, while customerscan manage home automationvia Bluetooth, GSM o GPRS.Easy and quick installations,just two wires without polarity!With Nice’s revolutionaryBlueBUS system far fewerconnections are required,which means incredibletime savings: just two wires,which carry both thecommunication signalsand the power supply!With BlueBUS you don’tneed to observe any polarity,therefore any related risk factoris eliminated.SYKCEThe kit contains the photovoltaicpanel SYP that converts sunlightinto electricity and the battery boxPSY24 storing the electrical energyproduced by the panel, withcontinuous and permanentsupply throughout the day.4


Systems for swing gates6


Selection guideFollow the arrow and choose the right productFor sectional and up-and-over doors,built-in BlueBUS technology, also available in kitIrreversible, 24 Vdc,with built-in control unit,belt drive.SpinbusSpinbusKitpages 10/13compatible for operationwith Solemyo and Operafor sectional doorsup to 10.5 m 2and for up-and-overdoors up to 11.8 m 2guide in three 1-metre sectionswithout guideKit complete with guide in one3-metre sectionfor sectional doors up to 12.5 m 2 and for up-and-over doorsup to 11.8 m 2 . Guide in three 1-metre sectionsSPIN30SN6031SPIN23KCESPIN40for sectional doors up to 17.5 m 2 and for up-and-over doorsup to 14.7 m 2 . Without guideSN6041Kitfor sectional doorsup to 10.5 m 2and for up-and-overdoors up to 11.8 m 2complete with guide in three 1-metre sectionscomplete with guide in one 3-metre sectionSPIN20KCESPIN21KCEcomplete with guide in one 3-metre section + one 1-metre sectionSPIN22KCEFor sectional and up-and-over doors,in kitIrreversible, 230 Vac,with built-in control unitand receiver, belt drive.SpinKitpage 14for sectional doorsup to 8.8 m 2and for up-and-over doorsup to 9.8 m 2complete with guide in three 1-metre sectionscomplete with guide in one 3-metre sectionSPIN10KCESPIN11KCEFor up-and-over and articulated doors,also available in kitIrreversible, 24 Vdc.TenTenKitpages 15/16with built-incontrol unitwithout built-incontrol unitwith built-in BlueBUS technology,compatible for operationwith Solemyo and Operawith built-in receiver courtesylight and electromechanicallimit switchwith courtesy lightfor doors up to 8/14 m 2for doors up to 9/16 m 2for doors up to 8/14 m 2for doors up to 9/16 m 2for doors up to 8/14 m 2for doors up to 9/16 m 2TN2010TN2010LTN2030TN2030LTN2020TN2020LKit, with built-in control unit and receivercourtesy light and mechanical limit switchfor doors up to 8 m 2for doors up to 9 m 2TNKCETNLKCE8


For sectional doors, in industrial and commercial useIrreversible with built-in control unit24 Vdc motor, with absolute encoderand incorporated BlueBUS technology.Compatible for operationwith Solemyo and Opera.Soonpage 17for doors up to 20 m 2SO2000For sectional and sliding 2-leaf doorsfor industrial and commercial useIrreversible, 24 Vdc motor,with magnetic encoder,with no need for limit switchadjustment.Sumopage 18IP44low speed, up to 35 m 2high speed, up to 25 m 2super high speed, up to 15 m 2IP54,up to 35 m 2SU2000SU2000VSU2000VVSU2010For folding 2-leaf doorsIrreversiblewith telescopic arm.Hyppopage 19230 Vac with limit switch on opening and closing24 Vdc version with magnetic encoder.Compatible with control units with BlueBUStechnology, Solemyo and OperaHY7100HY7124For balanced rolling doors230 Vac,with electromechanicallimit switch.Rondopage 20reversible, without brakeirreversible, with brakeand release devicewith lifting force up to 130 kgwith lifting force up to 180 kgwith lifting force up to 130 kgwith lifting force up to 180 kgRN2010RN2020RN2030RN20409


SpinbusThree-section guidein galvanised steelwith belt drive system,very quietFor sectional doorsup to 12.5 m² and up-and-overgarage doors up to 11.8 m²with Nice BlueBUS technology.230 Vac irreversible electromechanicalgear motor, for residential use,with belt drive, 24 Vdc motor,with magnetic encoder.Complete version of the guidein 3x1 m sections.Technical specificationsCodeElectrical dataPower supply (Vac 50 Hz)Absorption (A)Power (W)Built-in capacitor (μF)Performance dataSpeed (m/s)Force (N)Work cycle (cycles/day)Dimensional and general dataProtection level (IP)Working temp. ( °C Min/Max)Dimensions (mm)Weight (kg)SPIN30By rotating the “petal”which diffuses the light (40 W!),users access the incorporatedBlueBUS control unit230SPIN401.3 1.4350 370-0.20800 10005040-20 ÷ +50311x327x105 h3.6 4.7Compatible for operation with Solemyoand Opera systems.Rapid installation - anywhere!The adjustable head, cord-type releaseand cable-controlled, step-by-step releasecan be fi tted in any part of the garagein order to actuate the system withouta remote control device and withoutthe need to install wall-mounted control units!Guaranteed savings and respectfor the environment:with the connection to the mains in standbymode the control unit with radio connectedconsumes just 0.8 W (SPIN30) and 1.2 W(SPIN40); when connected to a batteryor to the Solemyo kit, consumption in standbymode is reduced to 0.036 W.User-friendly thanks to the BlueBUS system:which enables connection by meansof just two wires between the control unitand pair of photocells.Safe: obstacle detection system and automaticprogramming of the working times;motor absorption is monitored duringmovement, self-diagnosis by meansof a fl ashing light and courtesy light.Acceleration and deceleration can be adjustedat the beginning and end of each openingand closing manoeuvre.Can be connected with last generationsensitive edges 8.2 KOhm.Luminous: 40 W lamp E27that can be used as garage lightening.Installation diagramSectionalProjectingUtilisation limitsUsing the maximum travel1546Non-projectingup-and-overdoorProjectingup-and-overdoorSectional7H L H L H LSPIN30 2.2 m 4.2 m 2.8 m 4.2 m 2.4 m 4.4 m382SPIN40 2.2 m 4.2 m 2.8 m 4.2 m 2.4 m 5.2 m1. Spinbus 2. Transmitter 3. Photocells 4. Flashing light 5. Digital or key switches 6. SYP* solar panel7. PSY24* battery box 8. O-View* multifunction display. *Optional connection to Solemyo and Opera systems.10


SpinbusFor sectional doorsup to 17.5 m² and up-and-overgarage doors up to 14.7 m²with Nice BlueBUS technology.230 Vac irreversible electromechanicalgear motor, for residential use,with belt drive, 24 Vdc motor,with magnetic encoder.To use with the SNA30 - SNA6guides.Technical specificationsCodeElectrical dataPower supply (Vac 50 Hz)Absorption (A)Power (W)Built-in capacitor (μF)Performance dataSpeed (m/s)Force (N)Work cycle (cycles/day)Dimensional and general dataProtection level (IP)Working temp. ( °C Min/Max)Dimensions (mm)Weight (kg)SN6031230SN60411.3 1.4350 370-0.20800 10005040-20 ÷ +50311x327x105 h3.6 4.7By rotating the “petal”which diffusesthe light users accessthe incorporatedBlueBUS control unitCompatible for operation with Solemyoand Opera systems.Rapid installation - anywhere!The adjustable head, cord-type releaseand cable-controlled, step-by-step releasecan be fi tted in any part of the garagein order to actuate the system withouta remote control device and withoutthe need to install wall-mounted control units!Guaranteed savings and respectfor the environment:when connected to the mains on standbythe control unit with radio connectedconsumes just 0.8 W (SN6031) and 1.2 W(SN6041); when connected to a batteryor to the Solemyo kit, consumption in standbymode is reduced to 0.036 W.User-friendly thanks to the BlueBUS system:which enables connection by meansof just two wires between the control unitand pair of photocells.Safe: obstacle detection system and automaticprogramming of the working times;motor absorption is monitored duringmovement, self-diagnosis by meansof a fl ashing light and courtesy light.Acceleration and deceleration can be adjustedat the beginning and end of each openingand closing manoeuvre.Can be connected with last generationsensitive edges 8.2 KOhm.Luminous: 40 W lamp E27that can be used as garage lightening.Installation diagramSectionalProjectingUtilisation limitsUsing the maximum travel1546Non-projectingup-and-overdoorProjectingup-and-overdoorSectional7H L H L H LSN6031with SNA302.2 m 4.2 m 2.8 m 4.2 m 2.4 m 5 mApproximate draft.3281. Spinbus 2. Transmitter 3. Photocells 4. Flashing light 5. Digital or key switches 6. SYP* solar panel7. PSY24* battery box 8. O-View* multifunction display. *Optional connection to Solemyo and Opera systems.SN6041with SNA30SN6031with SNA6SN6041with SNA62.2 m 4.2 m 2.8 m 4.2 m 2.4 m 5.2 m3.2 m 2.9 m 3.5 m 3.4 m 3.4 m 3.5 m3.2 m 4.2 m 3.5 m 4.2 m 3.4 m 5.2 m11


SpinbusKit 20/21/22SN60211 gear motor with built-in control unitand SMXI plug-in receiver.FLO2R-S1 transmitter 433.92 MHz,2 channels.For sectional doorsup to 10.5 m² and up-and-overgarage doors up to 11.8 m²,with Nice BlueBUS technology.Pre-mounted guide in three1-metre sections SPIN20KCE,with pre-mounted guide of 3 mSPIN21KCE or pre-mountedguide of 4 m (3+1 m) SPIN22KCE.Rapid installation - anywhere!The adjustable head, cord-type releaseand cable-controlled, step-by-step releasecan be fi tted in any part of the garagein order to actuate the system withouta remote control device and withoutthe need to install wall-mounted control units!SPIN20KCEGuide (thickness 35 mm)in three 1-metre sections.SPIN21KCEGuide (thickness 35 mm)in one 3-metre section.SPIN22KCEGuide (thickness 35 mm)in one 3-metre section.+ one 1-metre section.3 x 1 m 1 x 3 m 1 x 3 m 1 x 1 mTechnical specificationsCodeElectrical dataPower supply (Vac 50 Hz)Absorption (A)Power (W)Built-in capacitor (μF)Performance dataSpeed (m/s)Force (N)Work cycle (cycles/day)Dimensional and general dataProtection level (IP)Working temp. ( °C Min/Max)Dimensions (mm)Weight (kg)SN60212300.8250-0.206505040-20 ÷ +50311x327x105 h3.6User-friendly thanks to the BlueBUS system:which enables connection by meansof just two wires between the control unitand pair of photocells.Safe: obstacle detection system and automaticprogramming of the working times;motor absorption is monitored duringmovement, self-diagnosis by meansof a fl ashing light and courtesy light.Acceleration and deceleration can be adjustedat the beginning and end of each openingand closing manoeuvre.Can be connected with last generationsensitive edges 8.2 KOhm.Luminous: 21 W lamp.Installation diagramUtilisation limitsSectionalProjectingUsing the maximum travel154Non-projectingup-and-overdoorProjectingup-and-overdoorSectionalH L H L H L32SPIN20KCE 2.2 m 4.2 m 2.8 m 4.2 m 2.4 m 4.4 mSPIN21KCE 2.2 m 4.2 m 2.8 m 4.2 m 2.4 m 4.4 mSPIN22KCE 3.2 m 2.9 m 3.5 m 3.4 m 3.4 m 3.1 m1. Spinbus 2. Transmitter 3. Photocells 4. Flashing light 5. Digital or key switches.12


SpinbusKit 23SN60211 gear motor with built-in control unitand SMXI plug-in receiver.FLO2R-S1 transmitter 433.92 MHz,2 channels.For sectional doorsup to 10.5 m² and up-and-overgarage doors up to 11.8 m²,with Nice BlueBUS technology.With pre-mounted 3-metre guide.Compatible for operation with Solemyoand Opera systems.Rapid installation - anywhere!The adjustable head, cord-type releaseand cable-controlled, step-by-step releasecan be fi tted in any part of the garagein order to actuate the system withouta remote control device and withoutthe need to install wall-mounted control units!SNA30Guide (thickness 35 mm)in one 3-metre section.Technical specificationsCodeElectrical dataPower supply (Vac 50 Hz)Absorption (A)Power (W)Built-in capacitor (μF)Performance dataSpeed (m/s)Force (N)Work cycle (cycles/day)Dimensional and general dataProtection level (IP)Working temp. ( °C Min/Max)Dimensions (mm)Weight (kg)1 x 3 mSN60212300.8250-0.206505040-20 ÷ +50311x327x105 h3.6Guaranteed savings and respectfor the environment:with connection to the mains in standbymode the control unit with radio connectedconsumes just 4.2 W; when connectedto a battery or to the Solemyo kit, consumptionon standby is reduced to 0.036 W.Safe: obstacle detection system and automaticprogramming of the working times;motor absorption is monitored duringmovement, self-diagnosis by meansof a fl ashing light and courtesy light.Acceleration and deceleration can be adjustedat the beginning and end of each openingand closing manoeuvre.Can be connected with last generationsensitive edges 8.2 KOhm.Luminous: 21 W lamp.No black out: operation in the eventof a power failure with optional batteries(PS124) housed inside the motor.Installation diagramUtilisation limitsSectionalProjectingUsing the maximum travel1546Non-projectingup-and-overdoorProjectingup-and-overdoorSectional7H L H L H LSPIN23KCE 2.2 m 4.2 m 2.8 m 4.2 m 2.4 m 4.4 mApproximate draft.3281. Spinbus 2. Transmitter 3. Photocells 4. Flashing light 5. Digital or key switches 6. SYP* solar panel7. PSY24* battery box 8. O-View* multifunction display. *Optional connection to Solemyo and Opera systems.13


SpinKitSN60111 gear motor SN6011with incorporated controlunit and plug-in receiver.FLO2R-S1 transmitter 433.92 MHz,2 channels.For sectional doorsup to 8.8 m² and up-and-overgarage doors up to 9.8 m²,belt drive.Pre-assembled, 3x1 m sectionsguide (SPIN10KCE)or pre-assembled 3 m guide(SPIN11KCE).Advanced: incorporated radio card,compatible with the Nice Flo, FloR and Smilosystems: 150 transmitters can be entered!Input for photocells and possibilityof connecting photo-test with self-learningfunction during installation.SPIN10KCEGuide (thickness 35 mm)in three 1-metre sections.SPIN11KCEGuide (thickness 35 mm)in one 3-metre section.Safe: obstacle detection system and automaticprogramming of the working times;motor absorption is monitored duringmovement, self-diagnosis by meansof a fl ashing light and courtesy light.Acceleration and deceleration can be adjustedat the beginning and end of each openingand closing manoeuvre.Can be connected with last generationsensitive edges 8.2 KOhm.3 x 1 m 1 x 3 mTechnical specificationsCodeElectrical dataPower supply (Vac 50 Hz)Absorption (A)Power (W)Built-in capacitor (μF)Performance dataSpeed (m/s)Force (N)Work cycle (cycles/day)Dimensional and general dataProtection level (IP)Working temp. ( °C Min/Max)Dimensions (mm)Weight (kg)SN60112300.7200-0.145503040-20 ÷ +50225x330x100 h3.3Installation diagramSectionalProjectingUtilisation limitsUsing the maximum travel154Non-projectingup-and-overdoorProjectingup-and-overdoorSectionalH L H L H L3SPIN10KCE 2.2 m 3.5 m 2.8 m 3.5 m 2.4 m 3.7 m2SPIN11KCE 2.2 m 3.5 m 2.8 m 3.5 m 2.4 m 3.7 m1. Spin 2. Transmitter 3. Photocells 4. Flashing light 5. Digital or key switches.14


TenFor projecting and non projectingup-and-over doors up to 9 m²(up to 16 m² using 2 motors),and jointed doors.24 Vdc electromechanical gear motorwith BlueBUS connection technology(TN2010 and TN2010L).PracticalNice releaseTechnical specificationsCodeElectrical dataPower supply (Vac 50 Hz)Absorption (A)Power (W)Built-in capacitor (μF)Performance dataSpeed (Rpm)Torque (Nm)Work cycle (cycles/hour)Dimensional and general dataProtection level (IP)Working temp. ( °C Min/Max)Dimensions (mm)Weight (kg)* 7.2 for TN2020/TN2020LProtection levelIP44TN2010 TN2010L TN2010+TN2020TN2010L+TN2020LDirect control buttonswith Open-stopand Close-stopfunctions (TN2010)TN2030TN2030 TN2030L +TN202010 Wcourtesy light2301 1.4 1 1.4240 350 220 330-TN2030L+TN2020L1.7 1.4 1.7 1.4 1.7 1.4 1.7 1.4350 600 500 750 320 420 70015 25 20 1044-20 ÷ +50150x158x512 h10 17.2* 9.5 16.7*Compatible for operation with Solemyoand Opera systems (TN2010 and TN2010L).Three versions, standard and upgraded:with incorporated control unit, force regulatorand absolute encoder (TN2010 and TN2010L);with incorporated control unit and receiver,electromechanical limit switch (TN2030 and TN2030L);without control unit (TN2020 and TN2020L).Advanced: the absolute encoder technologyguarantees precision without the need of a limitswitch, reliability and the long term safeguardof the set values (TN2010 and TN2010L).Simple: thanks to the BlueBUS technologywhich enables connection by meansof just two wires between the control unitand photocells (TN2010 and TN2010L).Energy saving: the system enters in stand-bywhen not in use (TN2010 and TN2010L).Practical: the control unit and PS324buffer battery (optional) can be connectedby means of a simple connectorand can be housed directly insidethe motor (TN2010 and TN2010L).Reliable and precise: memorisationof the opening and closing limit switchpositions; gradual starting and slowdownduring closing.Safe: obstacle detection systemand monitoring of the motor absorptionduring movement, self-diagnosis by meansof a fl ashing light, courtesy light.The latest generation optical and resistive8.2 KOhm sensitive edges can also beconnected.Functional: possibility of connectingtwo motors, TN2010 or TN2030with TN2020, for doors up to 14 m 2 ;TN2010L or TN2030L with TN2020L,for doors up to 16 m 2 .Installation diagramUtilisation limitsProjecting4162,52,4Approximate draft.538271. Ten2. Transmitter3. Photocells4. Flashing light5. Digital or key switches6. SYP* solar panel7. PSY24* battery box8. O-View* multifunction display.*Optional connection to Solemyoand Opera systems.Max. door height (m)2,32,22,1Projectingup-and-over doorNon-projectingup-and-over doorN.B. The values indicated above refer to the useof motors with standard accessories.15


TenKitTNKCE / TNLKCEFor projecting and non projectingup-and-over doors up to 9 m²and jointed doors.Irreversible electromechanical24 Vdc gear motor.Available in 2 versions:standard with torque at 280 Nm (TNKCE)and upgraded with torque at 420 Nm (TNLKCE).Functions: standard input for photocellsand possibility of connecting phototest functionin self-learning mode during installation.Convenient: built-in radio board compatiblewith the systems NiceWay, Flor, VeryVR,Flo, VeryVE and Smilo: possibility of enteringup to 150 transmitters.Push-button programming and automaticposition search.FLO2R-SThe kit contains:TSTNKCE / TNLKCE 1 irreversible electromechanical gear motor, with incorporated control unit and plug-inreceiver, courtesy light and electromechanical limit switch, complete with a pair of standard telescopicarms TNA5 and with relative driving devices TNA38. FLO2R-S 1 transmitter 433.92 MHz 2 channels.TS 1 signboard.Adjustments: 3 force levels, 2 speeds,3 pause time levels, 3 step-by-step modes.Maximum safety: provision for connectionof latest generation 8.2 KOhm sensitive edges.Obstacle detection and automatic programmingof work times, monitoring of motor absorptionthroughout travel, self-diagnostics viathe fl ashing light and courtesy light.Acceleration and deceleration at the startand end of each manoeuvre.Technical specificationsCodeElectrical dataPower supply (Vac 50 Hz)Absorption (A)Power (W)Built-in capacitor (μF)Performance dataSpeed (Rpm)Torque (Nm)Work cycle (cycles/hour)Dimensional and general dataProtection level (IP)Working temp. ( °C Min/Max)Dimensions (mm)Weight (kg)TNKCETNLKCE2300.9200-1.7 1.4280 4201544-20 ÷ +50150x158x512 h15.5Installation diagramUtilisation limitsProjecting451Max. door height (m)2,52,42,32,22,1321. Ten2. Transmitter3. Photocells4. Flashing light5. Digital or key switches.Projectingup-and-over doorNon-projectingup-and-over doorN.B. The values indicated above refer to the useof motors with standard accessories.16


SumoCase totally madefrom thick die-castaluminiumInspection compartment,easy to accessfor connectionsFor sectional doorsand two-wings sliding doorsup to 35 m².24 Vdc electromechanicalgear motor with magnetic encoder,no need to adjust limit switches.Perfect for intensive use.Four versions.Release cord, 6.5 m long,with emergency handleRevolutionary aesthetics: compact,particularly in width, in order to make assemblyeasy in any position; quick to install.Easy to install: Sumo can be fi tted directlyonto the shaft of sectional doors.Perfect for Ø 25.4 mm shafts and can beused also with Ø 31.75-35-40 mm shaftsthanks to the CRA9 adapter.Many different functions withthe separate Mindy A924 control unit:automatic memorization of limit switcheson opening and closing; gradual departureand slowdown during closing; integratedbattery charge card with optional batterypower supply in the event of power failureseasy programming by pressing a singlebutton; pause time programming and speedadjustment; “service” warning lightfor maintenance (can be programmedaccording to the number of manoeuvrerequired).Technical specificationsCodeElectrical dataPower supply (Vac 50 Hz)Absorption (A)Power (W)Built-in capacitor (μF)Performance dataSpeed (Rpm)Torque (Nm)Work cycle (%)Dimensional and general dataProtection level (IP)Working temp. ( °C Min/Max)Dimensions (mm)Weight (kg)SU2000 SU2000V SU2000VV SU20102413500-16 23.5 42 16120 82 46 1205044 54-20 ÷ +50110x270x350 h10.5Installation diagramSectionalTwo-wings sliding doors51157766432231. Sumo 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Control unit 7. Digital or key switches.18


Hyppo 7100Compact, shockproofbodywork with no sharpcornersFor 2-leaf folding doors.Electromechanical gear motorirreversible with telescopic arm,also in 24 Vdc version,with magnetic encoder.Single model for right and left leafs.Technical specificationsCodeElectrical dataPower supply (Vac 50 Hz)Power supply (Vdc)Absorption (A)Power (W)Built-in capacitor (μF)Performance dataSpeed (Rpm)Torque (Nm)Work cycle (%)Dimensional and general dataProtection level (IP)Working temp. ( °C Min/Max)Dimensions (mm)Weight (kg)Nice aluminium release,designed to accommodateexternal releaseHY7100HY7124230 -- 241.2 5250 12010 -1.7 2400 25030 8020-20 ÷ +50350x165x242 h13Pre-wired, incorporated doublelimit-switch both during openingand closing: fewer connections meanquicker installation (for HY7100 only).Solid metal mechanics.Sturdy, galvanised, telescopic arm.Recommended control units:Mindy A3, A3F, A6, A6F, A60, A700F;for HY7124 Moonclever MC824H.24 Vdc version with magnetic encoder.Perfect for intensive use, compatiblewith the control unit Moonclever MC824H,equipped with BlueBUS, and provisionfor operation with the systems Solemyoand Opera:• simple programming, by means of a single key;• self-learning of opening and closinglimit positions;• automatic fault diagnostics;• programming of pause time;• pedestrian pass door;• deceleration on opening and closing;• obstacle detection with dual technology;• operation in event of power failure by meansof optional rechargeable batteries (PS324);• provision for connection of latestgeneration resistive sensitive edges.Installation diagramUtilisation limitsApproximate draft.810956712341. Hyppo2. Transmitter3. Photocells mounted on posts4. Photocells5. Flashing light6. Control unit7. Digital or key switches8. SYP* solar panel9. PSY24* battery box10. O-View* multifunction display.*Optional connection to Solemyoand Opera systems.Max. gate weight (kg)200150Max. gate length (m)N.B. The above values are valid if the motoris used with standard accessories.1,0 1,519


RondoSturdy: housingin 100% aluminiumComplete: designedfor cordoperatedreleasePractical: easy to adjust,electromechanical limit switchesboth during closing and openingFor balanced rolling doors.Electromechanical gear motorwith lifting force up to 130 kgand 180 kg.Smart: the limit switch unit and wiringare protected by an elegant box;pre-wired capacitor.Fast: easy and intuitive adjustmentof the limit switches both during openingand closing.Complete: supplied with 200 mmand 220 mm fl ange for 60 mm shafts,with 48 mm and 42 mm adaptors.Easy to install: thanks to the guidedconnector, you don’t need to hold the motorwhile you secure it using just 3 screws.Recommended control units:Mindy A01 and A02 - easy to use,complete and reliable, featuring:• semi-automatic or automatic operation;• complete reverse run with photocell;• step-by-step operation;• programmable Step-by-step/Open input;• programmable Stop/Photo input;• input for resistive edge;• incorporated radio card, compatiblewith the Nice Flo, FloR and Smilo systems.Technical specificationsCodeElectrical dataPower supply (Vac 50 Hz)Absorption (A)Power (W)Built-in capacitor (μF)Performance dataSpeed (Rpm)Torque (Nm)Work cycle max (%)Dimensional and general dataProtection level (IP)Working temp. ( °C Min/Max)Dimensions (mm)Weight (kg)RN2010 RN2030 RN2020 RN20402302 2.6450 600-8.5130 18050% with 30 s ON and 30 s OFF20-20 ÷ +50ø 200x338 ø 200x355 ø 200x338 ø 200x3859.5 10Installation diagram4165321. Rondo2. Transmitter3. Photocells4. Flashing light5. Control unit6. Digital or key switches.Approximate draft.20


To complete your automation:Accessories for SpinbusSpinbusCode Description Pc/PackSNA3Spare control unit for SPIN30/SN6031SNA4Spare control unit for SPIN40/SN6041PS124 24 V battery with integrated battery charger 1SPA2 Kit for unlocking from the outside with cable 1SPA5Oscillating arm sliding on bearings with optimised structure1for projecting up-and-over doorsSPA6 Large 585 mm long connecting arm 1SPA7 Kit of two additional fi xing brackets 2SNA16 Quick-connect brackets for ceiling mounting 10TMF Pair of photocells for optical type sensitive edge 1TS Signboard 1SpinbusKit 20/21/22Code Description Pc/PackSNA2Spare control unit for SPIN20KCE, SPIN21KCE and SPIN22KCESPA2 Kit for unlocking from the outside with cable 1SPA5Oscillating arm sliding on bearings with optimised structure1for projecting up-and-over doorsSPA6 Large 585 mm long connecting arm 1SPA7 Kit of two additional fi xing brackets 2SNA16 Quick-connect brackets for ceiling mounting 10TS Signboard 1SpinbusKit 23Code Description Pc/PackSNA20Spare control unit for SPIN23KCEPS124 24 V battery with integrated battery charger 1SPA2 Kit for unlocking from the outside with cable 1SPA5Oscillating arm sliding on bearings with optimised structure1for projecting up-and-over doorsSPA6 Large 585 mm long connecting arm 1SPA7 Kit of two additional fi xing brackets 2SNA16 Quick-connect brackets for ceiling mounting 10TMF Pair of photocells for optical type sensitive edge 1TS Signboard 1Accessories for SpinKitCode Description Pc/PackSNA1Spare control unit for SPIN10KCE and SPIN11KCESPA2 Kit for unlocking from the outside with cable 1SPA5Oscillating arm sliding on bearings with optimised structurefor projecting up-and-over doorsSPA6 Large 585 mm long connecting arm 1SPA7 Kit of two additional fi xing brackets 2SNA16 Quick-connect brackets for ceiling mounting 10TS Signboard 1121


To complete your automation:Accessories for TenTenCode Description Pc/PackTNA1Spare control unit for TN2030, TN2030L, TNKCE and TNLKCETNA2Spare control unit for TN2010 and TN2010LPS32424 V battery with built-in battery charger.1Only for TN2010 and TN2010LTNA9Additional connection cable and supports1for wall-mounting of PS324 batteryTMFPair of photocells for optical type sensitive edge.1Only for TN2010 e TN2010LOTA2 Motor support bracket (1250 mm long) 1OTA3 Motor support bracket (2000 mm long) 1OTA9 Motor support bracket (520 mm long) 1TNA5 Pair of standard straight telescopic arms 1TNA6 Pair of standard curved telescopic arms 1TNA820x20 mm drive shaft1(200 mm long)TNA420x20 mm drive shaft1(1500 mm long)TNA38 Driving device for transmission shafts 1OTA11 Kit for unlock from the outside with a metal cord 1OTA12Kit for external unlocking with key ratchet1(cannot be used with laterally installed motors)TS Signboard 1TenKitCode Description Pc/PackTNA1Spare control unit for TN2030, TN2030L, TNKCE and TNLKCEOTA2 Motor support bracket (1250 mm long) 1OTA3 Motor support bracket (2000 mm long) 1OTA9 Motor support bracket (520 mm long) 1TNA5 Pair of standard straight telescopic arms 1TNA6 Pair of standard curved telescopic arms 1TNA820x20 mm drive shaft1(200 mm long)TNA420x20 mm drive shaft1(1500 mm long)TNA38 Driving device for transmission shafts 1OTA11 Kit for unlock from the outside with a metal cord 1OTA12Kit for external unlocking with key ratchet1(cannot be used with laterally installed motors)TS Signboard 1Accessories for SoonCode Description Pc/PackSOA2Spare control unit for SO2000PS124 24 V battery with integrated battery charger 1TMF Pair of photocells for optical type sensitive edge 1CRA9 Adapter for diameter 31.75 (1.1/4”), 35 and 40 mm shafts 1TS Signboard 122


Accessories for SumoCode Description Pc/PackA924 Control unit 1PUL Central cover with buttons, complete with connectingcable and connected for A500 and A924B12-B 12 V, 6 Ah batteries 1BA3-ANice battery boxKIOKey-operated selector switch for low voltage contacts,1with release mechanism for metal cordKA16 m cable release kit for KIO.1Not requested for SU2010CRA1Shaft with 18-tooth pinion Ø shaft 25.4 mm1Ø inside crown 25.4 mmCRA2 Joint for chain 1CRA3 1/2” chain, 1 m pack, plus joint for chain 1CRA41/2” chain, 5 m pack, ideal for single or double1wing industrial doors, plus joint for chainCRA5Tensioner drive with brackets, for single1or double wing industrial doorCRA6 36-tooth pinion Ø inside 25.4 mm 1CRA7 18-tooth pinion Ø inside 25.4 mm 1CRA8 Wall-fi xing bracket 2CRA9 Adapter for diameter 31.75 (1.1/4”), 35 and 40 mm shafts 1TS Signboard 11Accessories for Hyppo 7100Code Description Pc/PackHYA11 Unlock from inside with a 6 m cord 1KIOKey-operated selector switch for low voltage contacts,1with release mechanism for metal cordKA1 6 m cable release kit for KIO 1TS Signboard 1For 24 Vdc versionCode Description Pc/PackPS324 24 V battery with integrated battery charger 1Accessories for RondoCode Description Pc/PackA01 Control unit 1A02 Control unit with automatic closing 1KIOKey-operated selector switch for low voltage contacts,1with release mechanism for metal cordRNA01 Electronic brake for RN2020 and RN2010 1TS Signboard 123


Nice control electronicsWith just a click!Small, slim and coloured, ideal to carry in your pocket,bag or use as stylish key rings, or table-top or wall-mounted,for control the entire home at your fi ngertips!24


NiceWay: many solutions, just one gesture.Table shockproof holder.Wall or table shockproofholder.Squared wall plate. Rectangular wall plate. Module holder cover.TransmittersOne433.92 MHz and 868.46 MHz transmitters,with management of Identity Codes and Certifi cates.Compatible with Opera System.1, 2, 4 and 9 channel versions.FloRRadio-control 433.92 MHzrolling code system withself-learning function.1, 2 and 4 channelsversions.VeryMiniaturised radio control433.92 MHz rolling codesystem with self-learningfunction or programmablecode.SmiloRadio-controls433.92 MHz rolling codesystem with self-learningfunction. 2 and 4channel versions.Tag systemDisappearing inside standard wall mounted platesand suitable to confi ned spaces, are ideal for restorationsand upgrades of existing systems to control homeautomations, lighting points and all loads up to 500 Wnot directly accessible from cable controls.All without the need to replace the existing systemor involve building work!25


System OperaOneTransmittersand receiversO-ViewMultifunctiondisplayO-BoxConnection interfaceOX4TUniversalreceiverNice Opera simplifies the installer’s work, making for easier programming,and enabling access to all control panel parameters to adapt the systemto all requirements. No specifi c procedures needed for each product: singleprogramming mode with intuitive menus, with no need to consult instructions.Thanks to the GSM module, diagnostics can be performed remotelyand the automation can be monitored constantly avoiding costly inspectionson site with signifi cant savings in time.The BUS T4 technology enables the creation of a network of devices,connecting compatible control units between them, and centralising controlvia O-View. By interfacing the system with the PC, you can control a complexautomation system such as those found in densely frequented buildings(hospitals, hotels, companies, etc.).Management of the One series transmitters, even in large numbers,is now fast and simple with the option for remote control,and the creation of a database thanks to the software supplied.O-View_O-BoxSoftware SuiteCommunicationsoftware for PCand PDA27


Project Blu Product Design Roberto Gherlenda Photo Blu Printed by XXXXNice cares for the environment.Using natural paper it avoids excessiveuse of raw materials and forest exploitation.Waste is reduced, energy is savedand climate quality is improved.Certifi ed quality.Safety, quality, reliability and durabilityare priorities for Nice. All Nice Productsin fact comply with the provisionsof the European Directivesgoverning construction.ServiceDealers who offer Nice products to theircustomers believe in the value of quality;providing service that satisfi es all the needsand wishes of customers, before and aftersales, is a duty. Contact a Nice specialistwith complete trust!The information shown in this publication is purely indicative. Nice reserves the right to make any modifications to the products as it sees fit.Nice SpAOderzo TV ItaliaPh. +39.0422.85.38.38Fax +39.0422.85.35.85info@niceforyou.comFind out more about Niceproducts and services on the website:www.niceforyou.comDEP3501

More magazines by this user
Similar magazines