Cement 1 - Testing Equipment for Construction Materials

testing

Cement 1 - Testing Equipment for Construction Materials

�����������

TESTING

�������������������

������������������������

����������������������������������������

�����

��������

����������

������������������������

��������

Testing equipment for cement, plaster, mortar, concrete, asphalt, soil and steel

Testing equipment for

construction material

and laboratory furnishings

from Berlin

�����������������������������

����������������

����������

Equipment for construction repair and restoration

������� TESTING �������� Equipment for measurement of moisture

Systems for accredited concrete testing stations

Complete laboratory systems and furnishings for industrial and

vocational schools, technical high schools, trade schools, technical

colleges and universities

Laboratory furnishing made of stainless steel

�������TESTING/L �������TESTING/L TESTING ������

������

�������������������������

������������������

������������������������

��

�������������������

��������������������������

��������������

1996 � 2 �������������� DIN����

� EN�� ISO 9001 ������������������

���������������������������

��

�������������������������

��������������

Trusting is good, but TESTING is better

For more than 20 years now, we at

TESTING have produced testing

equipment for construction material.

We have indeed achieved a high

level of success: both in Germany

and on international markets.

We offer a comprehensive line of

testing systems to satisfy all the

requirements and expectations of

our customers.

The Made in Germany that you see

on our equipment stands for the

superior quality of the products

manufactured at TESTING.

First-class quality, ongoing efforts

toward quality enhancement, excellent

service and friendliness to our

customers are the key aspects of

our corporate philosophy.

In addition, we have been certified

according to DIN EN ISO 9001 since

February of 1996.

We guarantee the quality of our products

on the basis of highly qualified

and motivated staff, high-performance

production technology, as

well as reliable sub-contractors.

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de 1.03


1.04

����

Friendly and proficient

�����������

We at TESTING consider our support

of you a highly personal matter.

����������������� You are indeed in good hands with

���������������� TESTING staff.

You can of course also direct your

��������

inquiries and orders to us by e-mail

or fax.

��� ������

Home Office

TESTING Bluhm & Feuerherdt GmbH

Geneststraße 5-6

D-10829 Berlin

Germany

Tel.: + 49 30 / 755 90 94

Fax: + 49 30 / 755 90 98

e-mail: info@testing.de

www.testing.de

Jochim Feuerherdt

���

General Manager

Inis Schneider

Jens Petraneck

�� �������

Sales

Production / After sales service

TESTING

Branch Office in Neuss

TESTING Bluhm & Feuerherdt GmbH

Vossenacker Str. 9

D-41464 Neuss

Germany

Tel.: + 49 21 31 / 74 05 60

Fax: + 49 21 31 / 74 05 62 9

Andreas Feige

Navin Beckmann

Frank Völzke

�� �� ��������

Sales

Sales

Sales Branch Office Neuss

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de


TESTING

��

��

���

��

��

��

��

��/��

����

��/��

����

������

����

�����

1

2

Contents

Cement

Concrete

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de 1.05


1.06

TESTING

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de


TESTING

TESTING

1Cement

1

1.07


1.08

��

Cement

TESTING

STAR

�����

�����������

Electrical power sampler with spiral

conveyer on request

���

Order no.

1.0212

1.0207

1.0208

Sampling device for bulk cement

40 mm diam., length 1500 mm

ASTM C 183, EN 196

���� ���� EN196

Sampling device for packed cement

25 mm diam., length 850 m

EN 196

Equipment for determination of bulk density

of cement, consisting of: sieve funnel, tripod,

������� �������

measuring vessel 1l, ��������

��������

spatula, straight edge

ASTM C 183, EN 196

1.0209

1.0209.01

1.0209.02

1.0209.03

1.0209.04

1.0209.05

1.0209.06

1.0209.07

204

Blaine air permeability apparatus, compl.

EN 196, DIN 1164, BS 4550, ASTM C 204

����

Official calibration

1 �������

Standard sand 1 (coarse)

2 �������

Standard sand 2 (fine)

��

Spare parts

�� �� 12.5mm�1000 �

Filter paper 12.5 mm diam, 1000 ea.

���� 50ml

Fill oil, 50 ml

�� U ��

U-shaped tube made of glass

������

Aspirator with rubber tube

TESTING

�������

�� 40mm��� 1500mm

�������� ASTM C 183����� ����

EN196

�������

�� 25mm��� 850mm

���������

������������1 ��������

��

�������� ASTM C 183����� ���� EN

196

��������������

����

���� EN 196������� DIN 1164

���� BS 4550��������� ASTM C

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

������� ������� ��������

��������

���

Order no.

1.0290

1.0290.01

1.0209.02

1.0209.03

1.0209.04

1.0209.05

1.0290.02

1.0210

1.0210.01

1.0210.02

1.0210.03

1.0210.04

1.0210.05

Cement 1

��

������������

���230 V/50 Hz

����

���� EN 196������� DIN 1164��

��� BS 4550��������� ASTM C

204

Electronic Blaine air permeability apparatus

Complete, 230 V / 50 Hz

EN 196, DIN 1164, BS 4550, ASTM C 204

����

Official calibration

1 �������

Standard sand 1 (coarse)

2 �������

Standard sand 2 (fine)

��

Spare parts

�� �� 12.5mm�1000 �

Filter paper 12.5 mm diam, 1000 ea.

����� 50ml

Fill oil, 50 ml

�� U ��

U-shaped tube made of glass

��������

Dyckerhoff ������

230 V/50 Hz

Electronic air permeability tester

Dyckerhoff system

230 V / 50 Hz

�����������

Capillary tube with test certificate

��

Spare parts

����100 �

Dust filters, 100 ea.

�� �� 40.5mm�500 �

Filter paper 40.5 mm diam, 500 ea.

����� 150ml

Fill oil, 150 ml

�� U ��

U-shaped tube made of glass

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.09


1.10

��

Cement

1.0291

1.0292

1.0291.01

1.0291.02

1.0291.03

1.0291.04

TESTING

��� ��������

Order no. Dyckerhoff ������

����������������������

�����

���������������������

���������������������

���

�������������������� ��������

230 V / 50 Hz���

������� ��������

��������������1 �����500

�������� 41mm��100 �������

13mm��1 ���

Automatic Blaine analyzer,

Dyckerhoff system

An automatic, microprocessor-controlled analyzer

for measurement of the specifi c surface

(Blaine value) of powders.

This device operates with 1 or 2 measuring cells.

After entry of test-specific sample data into the

controller, the test is completely automatically

carried out and evaluated. The device has an

interface for a generally commercially available

printer.

230 V / 50 Hz, 1 ph

Scope of equipment delivered: automatic air

permeability tester, 1 bottle of fill oil,

500 ea. round filters (diam. 41 mm),

100 ea. dust filters (diam. 13 mm),

��������

1 ea. tamper

Device �������� with one measuring cell

��

Device with two measuring cells

1

Accessories

�������

���� 2800cm 2 /g

������� 600g

Calibration sand 1 (coarse)

Specifi c surface approx. 2800 cm2/g

Officially tested, approx. 600 g

2 �������

���� 4000cm 2 /g

������� 600g

Calibration sand 2 (fine)

Specific surface approx. 4000 cm2/g

���������������������

Offi cially tested, approx. 600 g

��

Precision dial gauge for measurement the filling

�������������������

level of the measuring cell (optional)

����

EN

196�����

Rotational lock for preventing the piston of the

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


TESTING

��������� Subject to technical modification without notice.

������� ��������

Cement 1

��

��� ������250 ����

Order no.

1.0211

0-1 ��� 18-24 ������

�������� ASTM C 188����� BS

4550

8.0139

1.0237

1.0237.01

1.0235

1.0235.01

1.0235.02

Le Chatelier flask cap. 250 ml

Graduated neck from 0 �-

1 ml and from 18 - 24 ml

ASTM C 188 / BS 4550

���������

����50 �����

Pycnometer with capillary rent stopper

Adjusted, cap. 50 ml, Duran

�����

�����������

������ DIN 1060����� ����

EN 459

Influx apparatus acc. to Böhme

For determining spec. flow density of lime

DIN 1060, EN 459

����

Filling collar

230 V / 50 Hz

Heat-of-hydration apparatus

Complete, for determination of the heat of hydration

230 V / 50 Hz

��

Spare parts

4550

Beckmann-type thermometer

ASTM C 186, BS 4550

������ 650 ��

Dewar flask, cap. 650 ml

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de



��


�������

����������������

������

�������� ASTM C 186����� BS

1.11


1.12

��

Cement

TESTING

STAR

���

Order no.

1.0301

1.0301.05

1.0301.11

1.0301.01

1.0301.16

1.0301.17

1.0302

1.0301.05

1.0302.01

1.0301.11

1.0302.02

1.0301.16

1.0301.17

TESTING

��������������� DIN 1164

���������������������

���

Vicat set needle unit, DIN 1164

Complete with needle, consistency plunger,

conical mould, glass base plate and thermometer

��

Spare parts

������� 1.13 ��

Initial-set needle, 1.13 mm diam.

������ 10 ��

Consistency plunger, 10 mm diam.

������� 65/75 ��

Conical hard rubber ring, 65/75 mm diam.

����110������ ��

Glass base plate, 110 x 110 x 3 mm

���

Thermometer

������������� ����

EN 196

����������������������

�������

Vicat set needle unit, EN 196

Complete with initial and final-set needle,

consistency plunger, conical mould,

glass base plate and thermometer

��

Spare parts

������� 1.13 ��

Initial-set needle, 1.13 mm diam.

������� 1.13 ���������

Final-set needle, 1.13 mm diam.

with special footing

������ 10 ��

Consistency plunger, 10 mm diam.

������� 70/80 ��

Conical hard rubber ring, 70/80 mm diam.

����110������ ��

Glass base plate, 110 x 110 x 3 mm

���

Thermometer

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


TESTING

��������� Subject to technical modification without notice.

Cement 1

��

��� ����������������� ASTM C

Order no.

1.0303

187-191

���������������������

���

1.0303.01

1.0301.11

1.0303.02

1.0301.16

1.0301.17

1.0304

1.0301.05

1.0302.01

1.0301.11

1.0304.01

1.0301.16

1.0301.17

Vicat set needle unit, ASTM C 187-191

Complete with needle, consistency plunger,

conical mould, glass base plate and thermometer

��

Spare parts

����� 1.0 ��

Initial-set needle, 1.0 mm diam.

������ 10 ��

Consistency plunger, 10 mm diam.

������� 60/70 ��

Conical hard rubber ring, 60/70 mm diam.

����110������ ��

Glass base plate, 110 x 110 x 3 mm

���

Thermometer

������������� BS 4550

����������������������

�������

Vicat set needle unit, BS 4550

Complete with initial and final-set needle,

consistency plunger, Vicat mould, glass base

plate and thermometer

��

Spare parts

������� 1.13 ��

Initial-set needle, 1.13 mm diam.

������� 1.13 ���������

Final-set needle, 1.13 mm diam.

with special footing

������ 10 ��

Consistency plunger, 10 mm diam.

���������� 90/80 ��

Vicat brass mould, 90/80 mm diam.

����110������ ��

Glass base plate, 110 x 110 x 3 mm

���

Thermometer

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.13


1.14

��

Cement

�������������� DIN 1168��������

��� ASTM ����� BS �������

Accessories for gypsum, DIN 1168 and acc.

to ASTM and BS on request

TESTING

��� ��� ����������������� DIN

Order no. 1168

1.0305

���

���

���

��� ��� ��� ���������������������

���

Vicat set needle unit for gypsum, DIN 1168

���

���

��� ��� ��� ���

��� ��� ���

��� Complete with conical plunger, conical hard

rubber ring, glass base plate and thermometer

��

Spare parts

1.0305.01 ��������� 10 ��

Conical plunger, 10 mm diam.

1.0301.01 ������� 65/75 ��

Conical hard rubber ring, 65/75 mm diam.

1.0301.16 ����110������ ��

Glass base plate, 110 x 110 x 3 mm

1.0301.17 ���

Thermometer

1.0306 ����������������� DIN

1164����� ���� EN 196���������

ASTM C 187

����������������������

���

Automatic Vicat set needle unit

DIN 1164, EN 196, ASTM C 187

Complete with initial and final-set needle, consistency

plunger, conical mould and glass base plate

��

Spare parts

1.0306.01 ������� 1.13 ��

Initial-set needle, 1.13 mm diam.

1.0306.02 ������� 1.13 ����������

��� ���� EN iEN

196 196

Final-set needle, 1.13 mm diam.

with special footing, EN 196

1.0306.04 ������ 10 ��

Consistency plunger, 10 mm diam.

1.0306.05 ����500 �

Extra sheets of plotting paper, 500 sheets

1.0306.06 ���

Extra recording pen

1.0301.01 ������� 65/75 ��������� DIN

1164

Conical hard rubber ring, 65/75 mm diam., DIN 1164

1.0302.02 ������� 70/80 ������� ����

EN 196

Conical hard rubber ring, 70/80 mm diam., EN 196

1.0306.07 ������ 120 ��

Glass base plate, 120 mm diam.

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


TESTING

��������� Subject to technical modification without notice.

1.0328.02 1.0328

1.0328 ( ��� /control unit)

1.0328.01(5x + ����� )

��� .

Order no.

1.0328

1.0328.01

1.0328.02

1.0328.03

1.0328.04

1.0328.05

1.0328.06

1.0328.07

1.0328.08

1.0328.09

Cement 1

��

�����������1 � 6 ������� ����

�EN EN 196-3 196-3

���������������� 5 ���

����

���������������������

�����������������

���������������������

�����

Automatic Vicat needle apparatus with 1 - 6

measuring points, EN 196-3

Consisting of a basic system with control unit

and up to 5 additional measuring points.

�������Each Vicat mould stands ��������

in a water bath with a

thermostat for regulation of the water temperature.

Each measuring point has a cleaning device

for the Vicat needle.

The control unit is equiped with a microprocessor

which enables fully automatic testing sequences.

�����������������230 V / 50

Hz�������� ����

EN 196-3

Basic device, complete, with electronic

control unit, 230 V / 50 Hz, 1 ph, EN 196-3

�����1 � 5 ��

����������

Additional measuring point (1 - 5 ea.)

For connection to the basic device

����������������+5°C �

+35°C������230 V / 50 Hz���

Thermostat for temperature control of the water

bath, +5°C to +35°C, including heating coil,

230 V / 50 Hz, 1 ph

����������

Additional heating coil per unit

��

Spare parts

���12 �������� 1.13 ��

1 set = 12 ea. Vicat needles, 1.13 mm diam.

���4 ������

1 set = 4 ea. felt-tip recorders

����100 �

100 sheets of plotting paper

���������� 70��� ����� ��

Vicat mould made of bronze, 70/80 mm dia. x 40

mm

����������

Water container for the Vicat mould

�������

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.15


1.16

��

Cement

TESTING

��� �����������6 �������� ����

Order no. EN 196-3

���������������������

���������������������

��������������

������300 �

������� ���������������������

��������

����������

1.0307

1.0307.01

1.0307.02

1.0307.03

1.0307.04

1.0307.05

1.0307.06

1.0307.07

1.0307.08

1.0307.09

1.0307.10

1.0307.11

1.0307.12

���������������������

�����

�������� Windows95 � 98�

����

��������������������

VGA ����� 17�

�� HP Deskjet 710 C ��������DINA4

���

����

��������������������

������

����������������

�������������600�775�900 �


�����������������

750�775�900 ��

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

������������

1 ������5 ���� 1.13 ��

���������� ����

EN 196

������ 100 ��

��������

��������� Subject to technical modification without notice.


Subject to technical modification without notice.

���������

TESTING

���

Order no.

1.0307

1.0307.01

1.0307.02

1.0307.03

1.0307.04

1.0307.05

1.0307.06

1.0307.07

1.0307.08

1.0307.09

1.0307.10

1.0307.11

1.0307.12

Cement 1

��

Computer controlled Vicat needle apparatus

with 6 measuring points, EN 196, p. 3

For determination of the setting time of cement.

The 6 measuring points are installed in a round

test tank.

Tests can be performed in air or under water.

Programmed test sequences.

Automatic registration of the beginning and of

the end of setting time as well as of curves.

Weight of probe: 300 g

After each penetration the Vicat needle is

automatically cleaned by a cleaning device

consisting of felt reels.

The delivery includes the Vicat needle apparatus,

the control unit and the standard software.

(suitable for WINDOWS 95 and 98)

Necessary accessories

PC-system for test execution including software

and operation manual in english

VGA colour monitor 17“

HP Deskjet 710 C colour ink jet printer,

formate DIN A 4

Optional accessories

Test area protection cover made of plastic

Thermostat for the precise controlling of the

temperature in the test tank

Laboratory worktable made of stainless steel,

w x d x h: 600 x 775 x 900 mm

PC-worktable made of stainless steel,

w x d x h: 750 x 775 x 900 mm

Spare parts

Spare felt reels for needle cleaning system

Set of Vicat needles (5 ea.) diam. 1.13 mm

Conical moulding ring (EN 196)

Glass plate diam. 100 mm

Specimen suport and centering device

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.17


1.18

��

Cement

TESTING

STAR

TESTING

STAR

���

Order no.

1.0223

1.0223.05

1.0223.01

1.0223.02

1.0223.03

1.0223.04

1.0224

���

1.0224.01

������

TESTING

������

����������

���������������������

����

������ DIN 1164���������� ����

�� DIN EN DIN 1015-3 EN 1015-3

Hägermann flow table

Manually operated with counter, table top of glass

complete with mould, feeding hopper and tamper

DIN 1164, DIN EN 1015-3

� 1.0223��������

Same as 1.0223 but without counter

��

Spare parts

�����

Conical mould

���

Feeding hopper

��

Tamper

����

Glass plate

������

�����230V/50Hz������

���������������������

����

������ DIN 1164���������� ����

�� DIN EN DIN 1015-3 EN 1015-3

Hägermann flow table

Electrically operated 230 V / 50 Hz, with counter,

table top of glass,

complete with mould, feeding hopper and tamper

DIN 1164, DIN EN 1015-3

������

�����230V/50Hz������

���������������������


���� ����

EN 413-2�EN 459-2

Hägermann flow table

Electrically operated 230 V / 50 Hz, with counter,

table top of stainless steel,

complete with mould, feeding hopper and tamper

EN 413-2, EN 459-2

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Order no.

1.0225

1.0225.01

1.0225.02

1.0226

1.0313

1.0223.01

1.0245

���

Flow table

Manually operated, complete

Table and mould made of bronze

ASTM C 230, BS 4551

��

Spare parts

�������

Conical mould made of bronze

����

Hardwood tamper

Cement 1

��

������

�������

�����������

�������� ASTM C 230����� BS

4551

������

�����230V/50Hz���

�����������

�������� ASTM C 230����� BS

4551

Flow table

Electrically operated 230 V / 50 Hz, complete

Table and mould made of bronze

ASTM C 230, BS 4551

������

������310�310�5 ��

Flow control disk for floating screed

Made of plexiglass, 310 x 310 x 5 mm

��

Accessories

�����

Conical mould

������

������100�100�200 ��

������ DIN 18555

Mortar compactibility container

w x d x h: 100 x 100 x 200 mm

DIN 18555

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.19


1.20

��

Cement

TESTING

��� ������

Order no.

1.0231

����������������

�������� ASTM C 91�C 141�C 266�

���� BS 4551-1

1.0236

1.0311

1.0311.01

1.0311.02

1.0311.03

1.0311.04

1.0312

Gillmore apparatus

To determine the setting time of cement, compl.

ASTM C 91, C 141, C 266, BS 4551-1

���������

����������

������ DIN 4211����� EN 413�EN

459�EN 1015-4

Consistometer for plasters

Complete, with mould and tamper

DIN 4211, EN 413, EN 459, EN 1015-4

��������

��������������

���� BS 4551-1�6463-4

Dropping ball apparatus

For measuring the consistence of fresh mortar, compl.

BS 4551-1, 6463-4

��

Accessories

�������

�������������� 0.1 ��

Ball penetration measuring apparatus

with precision sial gauge, graduated in 0.1 mm

��

Spare parts

��

Dropping ball

����

Brass mould

�����

Aspirator

����������

���������������������

���������������

230V/50Hz���

����

���� EN 413-2������� NF P18-452

Mortar workability apparatus

By vibration the mortar flows from the large

chamber into the small one. The time is a

function of the workability of the mortar.

230 V / 50 Hz, 1 ph

EN 413-2, NF P18-452

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

TESTING

STAR

TESTING

STAR

���

Order no.

1.0214

1.0214.01

1.0214.02

1.0215

1.0216

1.0213

1.0213.01

1.0301.16

�������

���� ���� EN 196

Le Chatelier-mould

EN 196

��

Accessories

���� 100 �

Weight ca. 100 g

����10 �

Glass plates, 10 ea.

��������

���� ���� EN 196

Testing device for Le Chatelier-moulds

EN 196

�����������

230V/50Hz

����

���� EN 196

Cement 1

��

Water bath with insert for Le Chatelier-moulds

230 V / 50 Hz

EN 196

V2A ���

������������

������ DIN 1164

Pot of stainless steel

With lid for measuring of the volume consistency

of cement

DIN 1164

������

Insert for glass plates

����110×110×3 ���10 �

Glass plates, 110 x 110 x 3 mm, 10 ea.

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.21


1.22

��

Cement

TESTING

STAR

���

Order no.

1.0324

1.0230

1.0230.01

1.0230.02

���

���

1.0230.03

1.0230.04

TESTING

������

��������������

�� 100 ����� 5 ����� 5 ��

��� 5°����� 120�120 ��

���� ���� EN 459-2����� BS 1191�BS

6463-4

Brass ring mould for Pat Test

For determination of the soundness of hydrated

lime and gypsum building plasters.

Diam. 100 mm, hight 5 mm, width 5 mm,

inside taper of 5°, with base plate 120 x 120 mm

EN 459-2, BS 1191, BS 6463-4

�������������

�� 8 ������ 25 �

���� TÜV������������

�������� ASTM C 151

High-pressure autoklav

Cap. 8 l, pressure 2.5 N/mm2,

inclusive security-test-certifi cate for

pressure chamber

ASTM C 151

��

Accessories

������� 8 � 1�×1�×11

Sample frame for 8 prisms

1“ x 1“ x 111/4“

1 /4���

������� 6 � 40×40×160 ����

Sample frame for 6 prisms

40 x 40 x 160 mm

���

���� 1�×1�×11 1 /4�

�������� ASTM C 490

Two-gang prisms mould

To produce specimens 1“ x 1“ x 111/4“

ASTM C 490

1�×1�×11 1 /4�������10 ���

Inserts for specimens 1“ x 1“ x 111/4“

Pack of 10 pcs

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING



�������� 1.24 �

Inserts see page 1.24

�������� 1.24 �

Inserts see page 1.24

TESTING

STAR

���

Order no.

1.0228.04

���

1.0228.07

1.0228.08

1.0228.09

���

1.0228

1.0228.10

1.0228.01

Cement 1

��

B �������

����������

25�25�250 ���70�70�280 ���

40�40�160 ���80�80�240 ���

50�50�250 ��

������������� 5 ��

��� 0.001 ��

������ DIN 52450���������

ASTM C490����� BS 1881�������

NF P 15-401

Shrinkage measuring device, type B

For specimens:

25 x 25 x 250 mm 70 x 70 x 280 mm

40 x 40 x 160 mm 80 x 80 x 240 mm


50 x 50 x 250 mm

Precision dial gauge, 5 mm travel,

0.001 mm graduations

DIN 52450, ASTM C 490, BS 1881, NF P 15-401

��

��

� 1.0228.04������������ ��


RS 232

��

��� 25 ��

����� 0.001 ��

Same as 1.0228.04, but with digital gauge and

RS 232 connector to PC, stroke 25 mm

sens. 0.001 mm

��

Accessories

25�25�250 ��������

�������� ASTM C490

Reference bar for specimens 25 x 25 x 250 mm

ASTM C 490

40�40�160 ��������

������ DIN 52450

Reference bar for specimens 40 x 40 x 160 mm

DIN 52450

C �������

�������� 40�40�160 ���

������������� 5 ��

��� 0.001 ��

������ DIN 52450

Shrinkage measuring device, type C

For specimens 40 x 40 x 160 mm, precision

dial gauge, 5 mm travel, 0.001 mm graduations

DIN 52450

� 1.0228����������� RS 232 ���

��� 25 ��

����� 0.001 ��

Same as 1.0228, but with digital gauge and RS 232

connector to PC, stroke 25 mm, sens. 0.001mm

��

Accessories

C �����

Control briquette specimen C

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.23


1.24

��

Cement

��

��

AB C AB C

1 1 2 2

���

Order no.

1.0228.05

1.0228.02

1.0228.06

���

1.0228.03

1.0229

1.0314

1.0314.01

������������

TESTING

������ DIN 52450

Inserts for determining shrinkage and moisture

movements, DIN 52450

1 ������� AB ���10 �

Steel inserts, type 1, form AB, 10 ea.

1 ������� C ���10 �

Steel inserts, type 1, form C, 10 ea.

2 ������� AB ��������10 �

Steel inserts, type 2, form AB,

to paste upon specimens, 10 ea.

2 ������� C ��������10 �

Steel inserts, type 2, form C,

to paste upon specimens, 10 ea.

��������

��������� 100 ��

����������� 12 ��

��� 0.002 ��

���� BS 1191

Plaster extensometer for gypsum

Complete with trough-shaped 100-mm base plate,

dial gauge, 12 mm travel, 0.002 mm graduations

BS 1191

���������������

���� 451-2��������� ASTM C 430

����� 451-2 ���������� 17.5

��� 17 ���������� 160 ����

���� 5 ����������������

�������

Fineness of fly ash determination by wet

sieving with the spray nozzle apparatus

EN 451-2, ASTM C 430

Consisting of spray nozzle 17,5 mm ID with

17 holes as specified in EN 451-2, a vacuum

pressure gauge, 160 kPa graduated at 5 kPa

divisions and fittings to attach the apparatus to

a standard domestic water supply.

Please, order special sieve separately.

������ 50 ��

Edelstahl Siebgewebe 0,045 mm

�������0.045 ��

Stainless steel mesh 0.045 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

1.0315

���

Order no.

1.0204

1.0204.01

1.0204.02

1.0315

1.0316

1.0315.01

1.0315.02

�����

������� 5 �

������

2 ������140/285 �/��

CE ����

230 V / 50 Hz

������ DIN 1164

Mortar mixer

With manual control, cap 5 l,

normal duty design

2 mixing speeds: 140/285 rpm

With CE-safety guard

230 V / 50 Hz

DIN 1164

��

Spare parts

������

Stainless steel stirrer

������

Stainless steel bowl

�����

������� 5 �

�����

2 ������140/285 �/��

CE ����

400 V / 50 Hz�3 �

����

���� EN 196������� DIN 1164

Mortar mixer

With manual control, cap 5 l,

normal duty design,

2 mixing speeds: 140/285 rpm

With CE-safety guard

400 V / 50 Hz, 3 ph

EN 196, DIN 1164

� 1.0315����� CE ����

Cement 1

��

Same as 1.0315, but without CE-safety guard

��

Spare parts

������

Stainless steel stirrer

������

Stainless steel bowl

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.25


1.26

��

Cement

TESTING

STAR

���

Order no.

1.0203

1.0203.02

1.0203.03

1.0203.01

1.0205

1.0206.03

TESTING

TESTING �����

������� 5 �

������

������

2 ������140/285 �/��

�� CE �������

400 V / 50 Hz�0.37 ��

���� ���� EN 196������� DIN 1164��

������� ASTM C 305�C 277����

� BS 3892

Mortar mixer TESTING

With manual control, cap 5 l,

heavy duty design,

2 mixing speeds 140/285 rpm

Safety devices, CE-certifi ed

400 V / 50 Hz, 0.37 kW

EN 196, DIN 1164, ASTM C 305, C 277, BS 3892

����� TESTING ������

Spare parts for all TESTING mixers

������

Stainless steel stirrer

������

Stainless steel bowl

TESTING �����

� 1.0203���������

Mortar mixer TESTING

Same mixer as 1.0203 but with sand dispenser

TESTING �����

� 1.0203���������������

��������������

���������

����

���� EN 196 T. 1+3������� DIN

1164 T. 5+7������ B 3310

Mortar mixer TESTING

Same mixer as 1.0203 but with automatic

programm control and sand feeder.

It is possible to select the manual working, or

the automatic programm.

Programms presently stored in the mixer:

EN 196 p. 1+3, DIN 1164 p. 5+7,

Austrian standard B 3310

�������

Other programms on request

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Order no.

1.0206

1.0206.02

1.0206.03

1.0206.01

Cement 1

��

TESTING �����

� 1.0203�����������������

����

��������������

���������

���� ���� EN 196 T. 1+3������� DIN

1164 T. 5+7������ B 3310

Mortar mixer TESTING

Same mixer as 1.0203 but with automatic

programm control, sand feeder and

water dosing system.

It is possible to select the manual working, or

the automatic programm.

Programms presently stored in the mixer:

EN 196 p. 1+3, DIN 1164 p. 5+7,

Austrian standard B 3310

������������

���������

������1000�850�750 ��

Base: Two-door stainless steel cabinet

Designed to accomodate water pumping unit

and water tank.

w x h x d: 1000 x 850 x 750 mm

�������

Other programms on request

TESTING �����

� 1.0203�����������������

�������

��������������

���������

����

���� EN 196 T. 1+3������� DIN

1164 T. 5+7������ B 3310

�������������

��������

������1000�850�750 ��

Mortar mixer TESTING

Same mixer as 1.0203 but with automatic

programm control, sand feeder, water dosing

system and dust exhaust system.

It is possible to select the manual working, or

the automatic programm.

Programms presently stored in the mixer:

EN 196 p. 1+3, DIN 1164 p. 5+7,

Austrian standard B 3310

Inclusive base: Two-door stainless steel cabinet

Designed to accomodate water pumping unit,

water tank and dust exhaust system.

w x h x d: 1000 x 850 x 750 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.27


1.28

��

Cement

���

Order no.

1.0203.04

TESTING

Exhaust and filtersystem

With suction connection and vacuum arm.

Air rating: 800 m3/h

Subatmosheric pressure: 2000 Pa

Special noise control system.

Filter cartridge with 8 m2 filter surface area,

cleaning is carried out with the filter block closed.

w x h x d: 500 x 770 x 730 mm

230 / 400 V AC, 0.75 kW

1.0217 CEN ���

�������TESTING/L ������

36 ���� 1350 �

1.0218

1.0202.01

1.0218.02

������

��������������������

���800m 3 /������2000 �

��������

8m 2 ���������������

������500�770�730 ��

230/400 V�0.75 �����

������ DIN����� ����

EN 196 T.1

CEN-Standard sand

36 portions ea. 1350 g

DIN EN 196 part 1

���

40�40�160 ��

�����������

������ DIN 1164���������

ASTM C 348����� BS 4551

Three-gang mould for mortar prisms

40 x 40 x 160 mm

Normal duty design, surface galvanized

DIN 1164, ASTM C 348, BS 4551

������

Feeding hopper for three-gang mould

��� 150�20 ��

Hand tamper 150 x 20 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

TESTING

STAR

���

Order no.

1.0202

1.0202.06

1.0202B

1.0202.06B

1.0202.01

1.0202.02

1.0202.03

1.0202.04

1.0202.05

1.0221.03

1.0221.01

1.0221.02

1.0221.03

�����

40.1�40�160 ��

Cement 1

��

�������������

���� ���� EN 196

Precision three-gang mould

40.1 x 40 x 160 mm

Grinded surfaces, marked webs and nutplates

EN 196

�����

� 1.0202������

Precision three-gang mould

Same as 1.0202 but finish electroless nickel

�����

� 1.0202���������

Precision three-gang mould

Same as 1.0202 but with boreholes for steel inserts

�����

� 1.0202���������������

Precision three-gang mould

Same as 1.0202 but with boreholes for steel inserts

and finish electroless nickel

��������

Feeding hopper for precision three-gang mould

����

Brass distribution template

������� 300 ��

Brass straightedge, length 300 mm

���� 210×185×6 ��

Glass cover plate, 210 x 185 x 6 mm

������

Application frame for prisms for measuring shrinkage

������

/ Test certificate

�������

40.1�40�160 ������� ����

EN 196

���������������� 9.5 ��

���������

Precision three-gang mould

40.1 x 40 x 160 mm, EN 196

Surfaces finish electroless nickel

Marked webs and nutplates, weight approx. 9.5 kg

(Other weights on request)

���

������

/ Feeding hopper

/ Test certificate

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.29


1.30

��

Cement

���

Order no.

1.0219.01

1.0219

1.0318

1.0319

1.0320

1.0219A

1.0219.10

���������

40�40�160 ��

TESTING

���50 �

Three-gang mould of polystyrene without lid

40 x 40 x 160 mm

Pack: 50 ea.

���������

40�40�160 ��

���50 �

Three-gang mould of polystyrene with lid

40 x 40 x 160 mm

Pack: 50 ea.

�����

10�40�160 �������

������������

Precision six-gang mould

10 x 40 x 160 mm, grinded surface

Marked webs and nutplates with boreholes for

steel inserts

� 1.0318�����

Same as 1.0318 but without boreholes

�����

20�20�160 �������

������������

Precision six-gang mould

20 x 20 x 160 mm, grinded surface

Marked webs and nutplates with boreholes for

steel inserts

�����8�����

�������� ASTM C 190�C 307

Briquette mould, with base plate

ASTM C 190, C 307

�8��������������

��������

�������� ASTM C 190�C 307

Three unit briquett mould

Made of brass with base plate

ASTM C 190, C 307

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Order no.

2.0213

1.0322

1.0401

1.0402

1.0323.01

1.0323.02

1.0324.01

�����

70.7 ������

���� BS 4550

Cube mould

70.7 mm with base plate

BS 4550

T 106

Three-gang mould for cubes

For 3 mortar cubes 50 mm

ASTM C 109, AASHTO T 106

Cement 1

��

������

3 � 50 ������

�������� ASTM C109��� AASHTO

�����

200�200�200 ��������������

� 2 ��� 100�100�200 ��

������ DIN 18555-4

Cube mould

200 x 200 x 200 mm with two inserts for

production of 2 specimens 100 x 100 x 200 mm

DIN 18555-4

�����

200�200�200 ��������������

�� 4 ��� 95�95�200 ��

������10 ��

������ DIN 18555-4

Cube mould

200 x 200 x 200 mm with cross-shaped insert for

production of 4 specimens 95 x 95 x 200 mm

Plate width: 10 mm

DIN 18555-4

��

Accessories

����

Special tamper

��

Spare parts

2 � 100×100×200 �����

2 ea. inserts 100 x 100 x 200 mm

������

1 cross shaped insert

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.31


1.32

��

Cement

TESTING

STAR

TESTING

STAR

���

Order no.

1.0220

1.0220.01

1.0221

1.0221.01

1.0221.02

1.0222

������

��������

�� 0.4-1.0 ��

���

230 V / 50 Hz

���� EN 196

TESTING

Vibrating table for three-gang moulds

With seperate switch box

Vibration range 0.4 - 1.0 mm

Timer

230 V / 50 Hz

EN 196

������

��������������������

�� 0.4-1.0 ��

���

230 V / 50 Hz

���� ���� EN 196

Vibrating table for three-gang moulds

Smooth styling in stainless steel, but very study,

built in switch box

Vibration range 0.4 - 1.0 mm

Timer

230 V / 50 Hz

EN 196

���������

����������60 �/��

230 V / 50 Hz

���� ���� EN 196-1�413-2�459-2�����

BS 3892�ISO 679

Jolting table with counter

With electronically controllable number of strokes

for exactly 60 strokes per minute

230 V / 50 Hz

EN 196-1, 413-2, 459-2, BS 3892, ISO 679

����40.1�40�160 ������� ����

EN 196

Three-gang mould 40.1 x 40 x 160 mm, EN 196

���

Feeding hopper

��������

70.7 �����230 V / 50 Hz����� BS 4550

Vibrating table for cube mould

70.7 mm edge length, 230 V / 50 Hz

BS 4550

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

1.0321.02

Subject to technical modification without notice. TESTING

1.0321.04

���

Order no.

1.0321

1.0321.01

1.0321.02

1.0321.03

1.0321.04

1.0321.05

��

Cement 1

����������������� ����

EN 196

�����+20°C ��1°C

�����95�����

���������������

Humidity curing of mortar specimens in threegang

moulds EN 196

inside temperature range: +20°C, ±1°C

Relative humidity: 95%, ± 3%

Elektronic adjustable control

Material: Stainless steel

24 �������

6 ������

������1400�750�1600 ��

Humidity cabinet for 24 three-gang moulds

with 6 telescopic cabinet racks

w x d x h = 1400 x 750 x 1600 mm

32 �������

8 ������

������1400�750�1700 ��

Humidity cabinet for 32 three-gang moulds

with 8 telescopic cabinet racks

w x d x h = 1400 x 750 x 1700 mm

48 �������

12 ������

������1400�750�1900 ��

Humidity cabinet for 48 three-gang moulds

with 12 telescopic cabinet racks

w x d x h = 1400 x 750 x 1900 mm

12 �����������

������������

1 ������������

1 ����� 3 ������

������1600�800�900 ��

Humidity workbench for 12 three-gang moulds

Stainless steel chassis with a sturdy worktable

1 lower cabinet for the humidity/temperature aggregat

1 lower cabinet with three telescopic racks

w x d x h = 1600 x 800 x 900 mm

24 �����������

2 ������ 3 ������

������2220�800�900 ��

Humidity workbench for 24 three-gang moulds

2 lower cabinets with 3 telescopic racks each

w x d x h = 2220 x 800 x 900 mm

36 �����������

3 ������ 3 ������

������2650�800�900 ��

Humidity workbench for 36 three-gang moulds

3 lower cabinets with 3 telescopic racks each

w x d x h = 2650 x 800 x 900 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.33


1.34

��

Cement

��������

Stainless steel on request

���

Order no.

1.0327

1.0323

1.0227

1.0227.01

TESTING

��������

���� ���� EN 196��������� ASTM

C 87�C 109

������

�����������

�����+20°C �+70°C��1°C

�����95������

���������620�440�400 ��

���������900�700�800 ��

���60 ��

Humidity cabinet

EN 196, ASTM C 87, C 109

Material: stainless steel

Inner inspection glass door.

Inside temperature: +20 to +70°C, ±1°C

Humidity: 95 %, ±3°C RH

Inside dimensions w x h x d: 620 x 440 x 400 mm

Overall dimensions w x h x d: 900 x 700 x 800 mm

Weight: 60 kg

�������������

����

���� EN 196��������� ASTM C

87�C 109

�������������

�������������

������+30°C

�����95������

���������1090�470�1200 ��

���������1370�540�1490 ��

���100 ��

230 V / 50 Hz����2000 �

Large capacity humidity cabinet for curing

large quantities of mortar specimens in

three-gang moulds

EN 196, ASTM C 87, C 109

Aluminium and plexiglass made with shelves.

Complete with water circulation pump and

precision digital thermoregulator.

Inside temperature: up to 30°C

Humidity: 95 %, ±3 %

Inside dimemsions w x h x d: 1090 x 470 x 1200 mm

Overall dimensions w x h x d: 1370 x 540 x 1490 mm

Weight: 100 kg

230 V / 50 Hz, 1 ph, 2000 W

����

������360�260�110 ��

���������

Wet-storage box

Plastic, 360 x 260 x 110 mm with supporting

grating for cement prisms

����

������600�400�200 ��

���������

Wet-storage box

Plastic, 600 x 400 x 200 mm with supporting

grating for cement prisms

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Order no.

1.0325

1.0329

1.0326

Cement 1

��

������

����

���� EN 196-1�196-8���������

ASTM C 109�C 511

���������������������

�-0.4°C �+20°C �����

��������������

�����������������

���40 �����60 � 40.1�40�160 ��

���

���������510�350�230 ��

���������680�420�420 ��

230 V / 50 Hz����2000 �

Waterbath for mortar specimens

EN 196-1, 196-8, ASTM C109, C511

Double walled stainless steel made with wool

insulation the bath ensures a constant and uniform

temperature at -0,4 bis +20°C.

Equipped with digital thermostat and electric stirrer.

A cooling coil device, connected to the water

net, ensures the water cooling when necessary.

Capacity of the bath:

40 l and over 60 samples 40,1 x 40 x 160 mm

w x d x h inside: 510 x 350 x 230 mm

w x d x h outside: 680 x 420 x 420 mm

230 V / 50 Hz, 1 ph, 2000 W

� 1.0325����������

�����+10 �+99°C��0.4�°

As 1.0235, but with electrical cooling device

Temperature range: +10 bis +99°C, ±0,4°C

������

�������������

����

����������1500�300�650 ��

���������1600�1500�650 ��

Water bath for standing mortar specimens

Consisting of stainless steel frame with

2 plastic tanks.

Thermoregulator

Tank dimension w x h x d: 1500 x 300 x 650 mm

Overall dimension w x h x d: 1600 x 1500 x 650 mm

�����������

Other water baths, also stainless steel made, on request

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.35


1.36

��

Cement

TESTING

STAR

TESTING

STAR

���

Order no.

1.0335

1.0336

1.0335.01

1.0335.02

1.7304

1.7304.01

1.7304.02

1.0337

1.0335.01

1.0335.02

TESTING

TESTING �������1 �

�������������

������ DIN18555 T.2��������� ����

��� DIN EN DIN 459 EN T.2���������

459 T.2���������

ASTM C 185

Air entrainment meter TESTING, cap. 1 l

For determination of void ratio in freshly

mixed mortar, hand operated pump

DIN 18555 p.2, DIN EN 459 p.2, ASTM C 185

TESTING �������1 �

������������������

������ DIN18555 T.2��������� ����

��� DIN EN DIN 459 EN T.2���������

459 T.2���������

ASTM C 185

Air entrainment meter TESTING, cap. 1 l

For determination of void ratio in freshly

mixed mortar, with electric minicompressor

DIN 18555 p.2, DIN EN 459 p.2, ASTM C 185

������

Filling hopper for air entrainment meter

����

Transport box

7304 ��������1 �

�������������

������ DIN18555 T.2��������� ����

DIN ��� EN DIN 459 T.2���������

EN 459 T.2���������

ASTM C 185

Air entrainment meter type 7304, cap. 1 l

For determination of void ratio in freshly

mixed mortar, hand operated pump

DIN 18555 p.2, DIN EN 459 p.2, ASTM C 185

������

Filling hopper for air entrainment meter

����

Transport box

TESTING �������0.75 �

���������������������

����

����

���� EN 196�EN 413 T.2

Air entrainment meter TESTING, cap. 0,75 l

For determination of void ratio in freshly

mixed mortar and for cement of masonry,

hand operated pump

EN 196, EN 413 p.2

������

Filling hopper for air entrainment meter

����

Transport box

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

��� ��� ��������

Order no.

1.0239

��� ���

���

����� 40�40 � 40�62.5 �����

���� ���� EN196������� DIN 1164

Compression device

��� Complete with 40 x 40 mm or 40 x 62.5 mm

pressure plates

��� EN 196, DIN 1164

��� ��� ���

��

Spare parts

��� 1.0239.01

1.0239.02

1.0240

10.0331

10.0332

10.0333

10.0334

10.0337

10.0338

10.0339

10.0310

10.0331.03

10.0331.05

40�62.5 �����

������ DIN 1164

Pressure plates 40 x 62.5 mm

DIN 1164

40�40 �����

���� ���� EN 196

Pressure plates 40 x 40 mm

EN 196

���������

������ DIN 1164����� ���� EN 196

Bending device

DIN 1164, EN 196

���

�������������

��������������

Cement 1

��

����

Pull-off tester

For measuring the adhesive strength of facing

plasters, mortars, cements etc. on its supports.

Indication of force by gauge or digital display,

hand operated

5kN – ��

16kN – ��

25kN – ��

50kN – ��

5kN – – ���� ����

16kN – ����

25kN – ����

50kN – ����

��

Accessories

/ gauge

/ gauge

/ gauge

/ gauge

/ digital display

/ digital display

/ digital display

/ digital display

�������� 50 ���10 �

Aluminium pulling plates, 50 mm diam., 10 ea.

����������

Two-component bonding agent for concrete

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.37


1.38

��

Cement

TESTING

��� ��� ����������

Order no. �� 40�40��60 ������8�����

1.0252

�������� ASTM C 190�C 348���

���� DIN 1164����� ����

EN 196-1�NF P

15-451�ISO�������� UNE 80101

���������������������

���

��������������/������

��

�������

0-5000 ��������� 45 ��/�

0-150 �������� 9 ��/�

230 V/ 50 Hz�����������

��� �������1060�740�550 ��

���

��� ���55 ��

��� ���

1.0253

1.0252.01

1.0252.02

1.0252.03

Automatic flexure/tension machine

For flexure tests on mortar prisms 40 x 40 x 160 mm

and for tension tests on cement briquettes.

ASTM C 190, C 348, DIN 1164, EN 196-1,

NF P15-451, ISO, UNE 80101

Production of force by beam loading system with

a travelling weight, synchronous motor operated

providing a constant increase in load throughout

the test.

Direct reading of max. force in N and strength

in N/cm2

Two measuring ranges:

0 - 5000 N with constant increase in load of 45 N/sec

0 - 150 N with constant increase in load of 9 N/sec

230 V / 50 Hz, 1 ph, other voltages possible

w x h x d: 1060 x 740 x 550 mm

Weight: 55 kg

� 1.0252����� 10000 �������

As 1.0252, but with capacity 10000 N

Accessories

������ 100 ��

Flexure testing attachement, NF, DIN, EN, UNI

Distance between the lower bearers 100 mm

����������ASTM ��

Flexure testing attachement ASTM

�����8�����

Tensile testing attachement ASTM

For tests on cement briquettes

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

����������NF�DIN�EN�UNI �


�������ASTM ��

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Order no.

1.0241

1.0241.01

1.0241.02

1.0242

�������TESTING/L ������

1.0242.01

1.0241.01

1.0241.02

Cement 1

��

��/��������

2 ��������������

�����40-200 kN

�����2-10 kN

���������

���� ���� EN 196-1������� 196-1������� DIN 1164� 1164�

���� BS 3892

Combined compression/flexion testing machine

Class 2, manual control, with pressure gauge

reading,

Pressure range: 40 - 200 kN

Flexion range: 2 - 10 kN

Other measuring ranges are available

EN 196-1, DIN 1164, BS 3892

������

Load pacer

��� 40�40 ���� 40�62.5 ������

���������������������

��

Pressure piston 40 x 40 mm or 40 x 62.5 mm,

for installation in the flexion tester, for compression

testing of soft mortar samples

��/��������

2 ��������������

�����20-100 kN

40-200 kN

�����1-5 kN

2-10 kN

���������

���� ���� EN 196-1������� 196 1 ������ DIN 1164 1164�

���� BS 3892

Combined compression/flexion testing machine

Class 2, manual control, with pressure gauge

reading

Pressure range: 20 - 100 kN

40 - 200 kN

Flexion range: 1 - 5 kN

2 - 10 kN

Other measuring ranges are available

EN 196-1, DIN 1164, BS 3892

��������

Shutoff valve for the smaller measuring range

������

Load pacer

��� 40�40 ���� 40�62.5 ������

���������������������

��

Pressure piston 40 x 40 mm or 40 x 62.5 mm,

for installation in the flexion tester, for compression

testing of soft mortar samples

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.39


1.40

��

Cement

TESTING

STAR

TESTING

��� ��� ��/��������

Order no.

2 �����������

1.0243

����������

�����10-100 kN

20-200 kN

�����0.5-5 kN

1-10 kN

���������

���� ���� EN 196-1������� DIN 1164�

���� 3892 BS 3892

���

1.0244

Combined compression/flexion testing machine

Class 2, manual control, with digital display,

electronic pacemaker and data storage of peak

values

Pressure range: 10 - 100 kN

20 - 200 kN

Flexion range: 0,5 - 5 kN

1 - 10 kN

Other measuring ranges are available

EN 196-1, DIN 1164, BS 3892

��/��������

1 ��������������������

�����4-200 kN

�����0.5-10 kN

���������

���� ���� EN 196-1������� DIN 1164�

���� 3892 BS 3892

Combined compression/flexion testing machine

Class 1, with servo control, digital display and

data storage of peak values

Pressure range: 4 - 200 kN

Flexion range: 0,5 - 10 kN

Other measuring ranges are available

EN 196-1, DIN 1164, BS 3892

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

Cement 1

��

��� ��� ������� 500 kN

Order no. ���������

1.0254

�����0-500 kN

100�200 � 300 ����������

���� 153 ��

�����185 ��

���1�

230 V / 50 Hz���

��� ��������������������

��� ���

��� ��� ��� ���

1.0255

1.0255.01

1.0255.02

1.0255.03

1.0255.04

1.0255.05

Compression testing machine

Hand operated, electronic digital display, measuring

system with microprocessor, 1 transducer

Pressure range: 0 - 500 kN

Also pressure ranges of 100, 200 or 300 kN possible.

Platens diam.: 153 mm

Max. vertical light between platens: 185 mm

Precision: 1 %

230 V / 50 Hz, 1 ph

Also available as machine with gauges with

hand or electric pump.

��/�������� 500/10 ��

� 1.0254����

�����0-500�300 �� 200 kN

�����0-10 �� 20 kN

��������������������

����

Compression/flexion testing machine 500 / 10 kN

As 1.0254, but with:

Pressure range: 0 - 500, 300 or 200 kN

Flexion range: 1 - 10 or 20 kN

Separate bending and compression testing

device necessary.

��

Accessories

����������

Strip printer (optional)

�� 50�50 �������������

Compression device for cubes 50 x 50 mm

�� 70�70 ������������

Compression device for cubes 70 x 70 mm

����� 40�40 ����

Compression device with platens 40 x 40 mm

40�40�160 ��������������


����

���� EN 196������� DIN 1164�NF

P15-451

Flexure testing device for mortar specimens

40 x 40 x 160 mm

EN 196, DIN 1164, NF P15-451

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.41


1.42

��

Cement

TESTING

��� ��� ��/�������� 250/10 250/15 �� ��

Order no. 2 ��������������

1.0256

������

�����25-250 kN

�����1.5-15 kN

�����������

��� ����

�������850�1050�400 ��

���240 ��

���

230 V / 50 Hz���

���� ���� EN 196-1������� DIN 1164�

���� 3892 BS 3892

���

1.0257

���

���

Combined compression/flexion testing machine

250 / 15 kN

Class 2, hand operated, with pressure gauge

reading, integrated load pacer

Pressure range: 25 - 250 kN

Flexion range: 1,5 - 15 kN

Safety guards for the compression area

Realisation as bench type

Overall dimensions w x h x d: 850 x 1050 x 400 mm

Weight: 240 kg

230 V / 50 Hz, 1 ph

EN 196-1, DIN 1164, BS 3892

��/�������� 250/15 ��

1 ��������������������

���������

�� RS 232

�����25-250 kN

�����1.5-15 kN

�����������

����

�������850�850�400 ��

���240 ��

230 V / 50 Hz���

���� ���� EN 196-1������� DIN 1164�

���� 3892 BS 3892

Combined compression/flexion testing machine

250 / 15 kN

Class 1, hand operated, with digital display,

electronic load pacer, peak hold feature,

strength indication, automatic zeroing

Interface: RS 232

Pressure range: 25 - 250 kN

Flexion range: 1,5 - 15 kN

Safety guards for the compression area

Realisation as bench type

Overall dimensions w x h x d: 850 x 850 x 400 mm

Weight: 240 kg

230 V / 50 Hz, 1 ph

EN 196-1, DIN 1164, BS 3892

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

Cement 1

��

��� ��� ������� 250 ��

Order no. 1 �����������

1.0258

���������������

�� RS 232

�����25-250 kN

�������165 ��

�����200 ��

��������������������

����

����

�������850�1050�400 ��

���240 ��

230 V / 50 Hz���

���� ���� EN 196-1��������� ASTM C

109

1.0259

Compression testing machine 250 kN

Class 1, hand operated, with digital display,

electronic load pacer, peak hold feature,

strength indication

RS 232 output

Pressure range: 25 - 250 kN

With platens diam. 165 mm,

vertical daylight 200 mm

For tests on mortar specimens you need a

compression or flexure device.

Realisation as bench type

Overall dimensions w x h x d: 850 x 1050 x 400 mm

Weight: 240 kg

230 V / 50 Hz, 1 ph

EN 196-1, ASTM C 109

��������� 250 ��

1 ��������������������

���

�� RS 232

���� ����

EN 196 �������������

���������������������

�����5-250 kN

���40�40 ��

230 V / 50 Hz���

���� EN 196-1

Automatic compression testing machine 250 kN

Class 1, with servo control, digital display,

electronic load pacer, peak hold features,

strength indication

RS 232 output

All test information required by the EN 196 can

be printed via P.C. with our special software.

Pressure ranges: 5 - 250 kN

Platens: 40 x 40 mm,

230 V / 50 Hz, 1 ph

EN 196-1

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.43


1.44

��

Cement

TESTING

STAR

TESTING

��� ��� ����/�������� 250/15 ��

Order no. 1 �������������

1.0260

��������������� 200 ����

��������������

���� ���� EN 196 �������������

���������������������

�����������

�����5-250 kN

�����0.5-15 kN

�������165 ��

�������1250�1450�460 ��

���360 ��

230 V / 50 Hz���

����

���� EN 196-1

1.0261

1.0262

Automatic compression/flexion testing machine

250 / 15 kN

Class 1, with servo control, digital display,

electronic load pacer, peak hold feature,

strength indication.

A maximum of 200 test data can be stored

for future transmission to P.C. or printer.

All test information required by the EN 196 can

be printed via P.C. with our special software.

Load measurement by pressure transducers.

Pressure ranges: 5 - 250 kN

Flexion range: 0,5 - 15 kN

Overall dimensions w x h x d: 1250 x 1450 x 460 mm

Weight: 360 kg

230 V / 50 Hz, 1 ph

EN 196-1

����/�������� 250/15 ��

� 1.0260������

������ 165 ��

���� 200 ��

��������������������

��

Automatic compression/flexural testing machine

250 / 15 kN

Same machine as 1.0260, but with:

Platens diam. 165 mm, vertical daylight 200 mm

For tests of mortar specimens you need a bending

and a compression device.

��������

Two versions available:

�����������

Load measurement by pressure transducers

�����������������

With two strain gauge load cells for tests with

very low loads

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

1.0263

1.0264

���

Order no.

1.0263

1.0264

1.0265

Cement 1

��

��������/��������

250/15 ��

1 ����������������

� �������

� �������� ASCII ����

� ���������������

������������� �� ������

Automatic computerised compression/flexural

testing machine 250 / 15 kN

Class 1, for cement tests, main features:


�•

Automatic performance of compression and

flexural test

• Works with computer network with ASCII-files

• Elaboration of test data and certifi cate print out

Supplied complete with PC and graphic printer

format A4

��������


Three versions available:

��������/��������

250/15 ��

���������������������

��������

�����������

230 V / 50 Hz���

���� ���� EN 196-1

Automatic computerised compression/flexural

testing machine 250 / 15 kN

With integrated compression and flexure testing

devices and control console complete with PC

and printer.

Measurement of force by two pressure transducers

230 V / 50 Hz, 1 ph

EN 196-1

� 1.0263������� 165 ��������

�������������

�����������

���� ���� EN 196-1��������� ASTM C 109

As 1.0263, but with platens diam. 165 mm

Separate bending and compression testing

device necessary.

Measuring of force by pressure transducers

EN 196-1, ASTM C 109

� 1.0264������ 165 ���������

������������

������������

���������

���� EN 196-1��������� ASTM C 109

As 1.0264, but with platens diam. 165 mm

Separate bending and compression testing device

necessary. Measuring of force by electronic

load cells ( For tests with very low loads)

EN 196-1, ASTM C 109

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.45


1.46

��

Cement

TESTING

��� ��� ������

Order no.

1.0232

�����������

������ DIN 4227����� ���� EN 445�

���

1.0233

���

1.0234

Immersion device

For determination of the flow properties of

pre-stressed grout

DIN 4227, EN 445

������

���������������

������ DIN 4227����� ���� EN 445

Measuring device acc. to Schmidt

For rapid volumetric determination of settling

and swelling ratio of intrusion mortar

DIN 4227, EN 445

��������

���������������������

����

������ DIN 4227����� ����

EN 445

Scanning device

For determination of the setting ratio of prestressed

grout, consisting of plexiglass cover

with drilled holes and measuring caliper

DIN 4227, EN 445

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

TESTING

STAR

��� ��� ��������

Order no.

1.0250

�����������

��������8�9�10�11 ��

��� ��� ����

���� EN 445�

���

1.0250.01

1.0250.02

���

���

1.0251

1.0251.01

1.0270

Cement 1

��

Marsh funnel

For determination of the flow properties of mortar.

Nozzles diam.: 8, 9, 10, 11 mm

EN 445

������ 12.5 ��

Nozzle diam. 12.5 mm

���� 150 ��������� 1.5 ��

Sieve, diam. 150 mm, opening 1.5 mm

������

���������������������


����� 1 ����

������4.76 ��

Marsh funnel of rugged, break resistent plastic

For determination of the flow properties of

fluid material (e.g. mud).

Complete with plastic measuring cup 1 l

Nozzle diam. 4.76 mm

� 1.0251������ 10 ��

As 1.0251, but with nozzle diam. 10 mm

�����������

��������������������

�������

�����

���������������������

�����������������

��������������������

�����

Mud balance

For the determination of mud density.

Rigid construction for field use.

The balance consists of a base, graduated arm

with cup, lid, rider, counter weight, spirit level

and knife edge.

The plastic case is designed to hold the balance

in working position.

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.47


1.48

��

Cement

TESTING

��� ��� ��� MFP 1 � MFP 2

Order no. ������ DIN 4127

��������������

���������������������

���

����������

���

���

���

��� ���

��� ��� ���

��� 1.0271

���

1.0272

Filter press MFP 1 and MFP 2

DIN 4127

For the determination of filtration properties

of supporting clay liquids.

Sturdy apparatus made of corrosion-resistant

material, pressure gauge and pressure control,

security valve for compressed air pipe,

air-relief valve.

Simple replacement of sealing and sieve.

��� MFP 1

���������

����� 10 ������� 100 ����

Filter press MFP 1

Pressurizing by CO2-cartridges

Apparatus inclusive CO2-cartridges, 10 ea.

and filter paper, 100 ea.

��� MFP 2

������

����� 100 ���

Filter press MFP 2

For compressed air

Apparatus inclusive filter paper, 100 ea.

��

Accessories

notice.

1.0271.01 ���1 ��100 �

Filter paper, 1 pack = 100 ea.

without

1.0271.02 ������

Measuring cylinder plastic

modification

1.0271.03 ������1 ��10 �

CO2 cartdrigdes, 1 pack = 10 ea.

technical to

1.0271.04 ����

Subject

1 set O-rings

���������������������

Available also for grouts, boring

cement and frac-fluids

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

���������


Subject to technical modification without notice.

���������

TESTING

TESTING

STAR

Cement 1

��

��� ��� ������

Order no. ����������������

1.0273

���������������������

���������������������

����

���� 75 ��

���� 22 ��

���� 0.3 ��

����� 100 ���

���

���

���

1.0274

���

1.0275

1.0275.01

Ring funnel

For simplifi ed determination of the time of

water draining (Control of filtration).

Replaces partially the operations of a filter

press, but without the same precision.

But results are suffi cient to make conclusions

about the properties of clay liquids.

Diameter: ca. 75 mm

Height: ca. 22 mm

Weight: ca. 0.3 kg

Delivered complete with filter paper, 100 ea.

�������������

��������

������� 0.09 �����������

������������

Determination of sand content in clay liquids (mud)

By using sieve and measuring cylinder.

The sand content kit contains sieve 0.09 mm,

funnel and measuring cylinder and is used to

determine the sand content in vol. %

���������

������ DIN 4126

��������������

����������������� 1 ���

����������

�������

���������������������

��

Ball harp

DIN 4126

For the determination of the liquid-flow limit

of supporting clay liquids.

The apparatus consists of support with 2 sets

of balls for ball harp and 2 transparent sampling

vessels 1 l.

Simple and easy to operate measuring apparatus.

All components like balls, disks and vessels can

be odered separately as spare parts.

������9 ���

Set of balls type S - special set of 9 balls

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.49


1.50

��

Cement

TESTING

STAR

/ Spare parts

TESTING

��� ��� ����������

��� Order no. ����������115�240�12 ��

1.0247 ���

���

Grating for testing of the compressive strength

in bed joints

Complete, w x d x h: 115 x 240 x 12 mm

���

1.0247.01

��� ���

���

���

1.0238

���

1.0246

1.0246.01

1.0246.02

1.0278

���� 115�240 ���100 �

Fibrous fleece, 115 x 240 mm, 100 ea.

Determination of the water absorption

coeffi cient of building materials

DIN 52617, ISO 15148

The production of the specimens is made in moulding

rings of stainless steel, 200 mm diam., h = 20 mm

Equipment set for determination of water

retention by the filter paper method

DIN 18555, p. 7, EN 459, p. 2

Complete with filter paper and fibrous fleece

/ Spare parts

���������190�190�2 ���20 �

Filter papers w x d x h: 190 x 190 x 2 mm, 20 ea.

������� 185 ���100 �

Fibrous fleece, 185 mm diam., 100 e.a.

Waterretention of building plasters EN 413-2

The testing set consists of:

brass ring mould, 100 diam. x 25 mm deep,

brass straightedge, 2 kg weight,

rigid plate diam. 110 mm, 1 m 2 cotton gauze,

filter paper diam. 110 mm (500 e.a.),

spatula 150 x 22 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

���������

������ DIN 52617�ISO 15148

������������� 200 �����

20 ��

��������������

������ DIN 18555, T.7����� ����

EN 459

T.2

������������

��

������������� ���� EN 413-2

�����

��������� 100��� 25 �����

������ 2 �������� 110 ���1m 2

����

������� 110 ���500 ����� 150�22

��

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Cement 1

��

��� ��� �����������

Order no.

1.0280

���� ���� EN 459-2

���1000 ���������� 77 ����

���������������������

���

���� 300�50 �/���������� 60

����������� 0-100°C

���

���

1.0281

���

���

���

1.0282

1.0276

Apparatus for determining the reactivity of

lime with water

EN 459-2

The apparatus consists of

Dewar vessel, 1000 ml, 77 mm diam.,

lid of plastic with filling aperture,

bore for stirrer shaft and thermometer,

stand with stirring motor 300 ± 50 rpm,

flat blade paddle agitator 60 mm diam.,

gauged thermometer 0 - 100°C

�����

���� ���� EN 459-2

��������������������

������

���113 ��

���140 ��

Slaking vessel for lime

EN 459-2

For determining the yield of lime by leaving the

sample to slake in an insulated vessel with cover

Inner diameter of the vessel: 113 mm

Height: 140 mm

������������

�������� ����

EN 459-2 �����

������������������� 50

����� 10 ��

Volume constancy test of building lime

According to the alternative method

EN 459-2

Tri-partite steel mould for the production of a

cylindrical specimen, diam. 50 mm, h = 10 mm

��

Accessories

������� 55 ����� 2 ������


�����0-5.5 ����� 0.1 ��

0-55 ����� 1 ��

Compression testing machine 55 kN with two

gauges and handpump

Measuring range: 0 - 5.5 kN, div 0.1 kN

0 - 55 kN, div 1 kN

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.51


1.52

��

Cement

��� ��� �������������

Order no.

1.0248

������ DIN 18555�T.5

���

���

1.0249

���

���

���

1.0285

1.0285.01

1.0285.02

TESTING

Device for determination of the adhesive shear

strength of masonry mortar

DIN 18555, p. 5

�����������

������������

������

�������������

Flow-test channel for grout

An instrument for testing the working properties

of grout.

Material: stainless steel

Design acc. to German Concrete Association

���������������

����������

������

�����1000 ��

�������

�������� 100 ��

�� 90 ��

�� 50 ��

Shrinkage channel for grout and floating screed

To measure shrinkage or expansion

Material: stainless steel

Measuring length: 1000 mm

Frontsides with claws

Dimensions of channel: top 100 mm

bottom 90 mm

height 50 mm

Accessories

Digital gauge with RS 232 for measuring

shrinkage or expansion

Stroke 12 mm, sensitivity 0.01 mm

���

Printer

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

�������� RS232 ��������

�����12 ����� 0.01 ��

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

Cement 1

��

��� ��� �����

Order no. ���� ����

EN 196-21��������� ASTM

1.0286

C 114��� 17

����������

���������������������

��������������

���

���

���

���

���

��� ���

1.0286.01

1.0286.02

1.0286.03

1.0286.04

1.0286.05

1.0286.06

����

���LED 0-199.9 ppm

��������3-100 ppm

�� 5-100 ppm

�� 100-200 ppm

�� 5-100 ppm

�����1�CV�20 ������� 10ppm

�������3 ppm���5ppm

�����2-6 cm

Flame photometer

EN 196-21, ASTM C 114, Test 17

For determining the alkali content of cement.

Complete with sodium, potassium and lithium

filters, fuel and air connectors, clearing wire,

tubing and hose cups

Technical data

Readout: LED 0 - 199,9 ppm

Sensitivity: Na or K: 3 - 100 ppm

Li: 5 - 100 ppm

Ba: 100 - 200 ppm

Ca: 5 - 100 ppm

Reproducibility: 1 % CV for 20 consecutive

samples using 10 ppm, set to read 100

Linearity: Na or K: 3 ppm, Li: 5 ppm

Sample size: 2 - 6 cm3

Air supply: approx. 6 litres / min at 100 kPa

Fuel: propane, butane or natural gas

w x h x d: 420 x 360 x 300 mm

Weight: 8 kg

230 V / 50 Hz, 1 ph

Accessories

3

���100 ���� 6 �/��

������������

�������420�360�300 ��

���8 ��

230 V / 50 Hz���

��

���� / Calcium filter

���� / Barium filter

������ / Regulator for natural gas

����� / Regulator for propane gas

����� / Regulator for butane gas

����� / Air compressor

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.53


1.54

��

Cement

TESTING

��� ��� ��� �������

Order no. ����

���� EN 196-2�EN 459-2

�������� 975�25°C �������

���������

���

1.0287

Loss-on ignition

EN 196-2, EN 459-2

The loss-on-ignition of cement and building lime

can be determined by using a muffle furnace to

oxidize the sample in air at 975 ±25°C.

��������� CWF 11/5

��� 1100°C ��������������


�����4.7 �

��������������140�135�250

��

������������375�585�485 ��

230 V / 50 Hz�2.4 kW

Laboratory chamber kiln model CWF 11/5

For incineration and annealing processes

and material tests up to 1100°C

Internal volume: 4.7 l

Internal dimensions w x h x d: 140 x 135 x 250 mm

External dimensions w x h x d: 375 x 585 x 485 mm

230 V / 50 Hz, 2.4 kW

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


TESTING

TESTING

2Concrete

2

2.01


2.02

���

Concrete

�����������

TESTING

��� ������ TMV 75, VDZ

Order no.

2.0201

�� 75 ��� 32 �������������


400 V / 50 Hz�2.2 kW

2.0280.01

2.0280.02

2.0280.03

10.2503

10.2503.01

8.0217

8.0218

Pug-mill mixer TMV 75, VDZ

75 l capacity, up to 32 mm grain size,

with removable mixing plate and cart

400 V / 50 Hz, 2.2 kW

������ ZM 50

�� 50 �

� 8 ����

� 16 ����

400 V / 50 Hz�2.2 kW

Pug-mill mixer ZM 50

50 l capacity,

up to 8 mm grain size,

up to 16 mm grain size,

400 V / 50 Hz, 2.2 kW

��

Accessories

65 ����������

Plastic container 65 l and cart

������� DUO 1200

������

230 V / 50 Hz�1.2 kW�12 ��

Hand-operated mixer model DUO 1200

With mixing instruments

230 V / 50 Hz, 1.2 kW, 12 kg

�� / Accessories

RSU ���������

Mixer stand RSU with safety switch

��� 43 �

Mortar barrel 43 l

��� 65 �

Mortar barrel 65 l

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

TESTING

STAR

Subject to technical modification without notice. TESTING

Concrete 2

���

������

��� ���������

��� Order no.

��� 2.0205

���

��� ���

��������������������

������ DIN 1048���������� ����

�� DIN EN DIN 12350-5 EN 12350-5

��� ��� ���

���

��� ��� 2.0205.01

2.0205.02

2.0205.03

2.0447

2.0448

2.0447.01

2.0447.02

Slump table based on Graf

For determination of the workability,

complete with tamper and slump cone

DIN 1048, DIN EN 12350-5

/ Spare parts

/ Tamper

/ Slump cone

/ Slump table

Flow table

For determination of the flow of freshly mixed concrete

Table dimension: 762 mm

Height: 600 mm

AASHTO T120, ASTM C124, UNI 8020, UNE 7102

Manually operated

/ 2 Versions

Electrically operated with counter, 230 V / 50 Hz

2.0447 � 2.0448 ��

Accessories for 2.0447 and 2.0448

����

Flow mould

��

Tamping rod

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

��

����

������

�����������

�������������

�����762 ��

���600 ��

AASHTO �� T120��������� ASTM

C 124�UNI �� 8020�������� UNE

7102

2 �����

����

�����������230 V / 50 Hz

2.03


2.04

���

Concrete

TESTING

STAR

Slump test set

Consisting of base plate, slump cone, tamper,

graduated rule and aluminium scoop

DIN EN 12350-2, BS 1881, ASTM C143, AASHTO p. 119

/ Spare parts

�������

Slump cone, zinc plated

Base plate 400 x 400 mm

Other dimensions possible

����� 16 ��

Tamper, 16 mm diam.

�����

Graduated steel rule

C143�AASHTO �� T.119

Slump cone complete test set

Including metal pan, stainless steel cone;

tamping rod, slump scale with measuring device

and cone funnel zinc plated, aluminium scoop

DIN EN 12350-2, BS 1881, ASTM C143, AASHTO p. 119

/ Spare parts

����� 16 ��

Tamper, 16 mm diam.

������

Slump cone, stainless steel

�����

Cone funnel

��

Aluminium scoop

TESTING

��� ��� �������

Order no.

���

2.0206

��� ���

��� ���

�������������������

����������� ���� DIN EN 12350-2��

��� BS 1881��������� ASTM

C143�AASHTO �� T.119

���

��� ��� ���

���

���

2.0206.01

2.0206.02

2.0206.03

2.0206.04

2.0206.05

2.0206.03

2.0206.06

2.0202.07

8.1204

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

�� 400�400 ����������

���������

����������������������

�������������

����������� ����

DIN EN 12350-2��

��� BS 1881��������� ASTM

��

Subject to technical modification without notice.

���������


���������

TESTING

STAR

1.0223.01 + .02 + .04

Subject to technical modification without notice. TESTING

2.0206.01 + .08

Concrete 2

���

��� ��� ���������

Order no.

��� Testing equipment for self compacting concrete SCC

��� ��� ���

���

���

���

1.0223.02

1.0223.01

���

���

1.0223.04

���

2.0440

2.0440.01

2.0441

2.0441.01

2.0206.01

2.0206.08

�����������������

�������� FFV � FM ������

Conical mould with feeding hopper

For determination of the relative slump for

ultrafines suspensions or for mortar

���

Feeding hopper

�����

Conical mould

������ 300 ��

Glass plate diam. 300 mm

���� V ���

������������� RM

����������������

������275�30 �������800 ��

V-funnel for mortar testing

For determination of the relative falling time R M

of mortar, completely made of stainless steel, with

a mortar catch collar around the top.

Funnel w x d: 275 x 30 mm, height over all: 800 mm

����������� V �����

Funnel, made of stainless steel, for V-funnel mortar

������� V ���

���������������� RB

����������������

������515�75 �������1200 ��

V-funnel for concrete testing

For determination of the relative falling time R B

of concrete, completely made of stainless steel,

with a concrete catch collar around the top.

Funnel w x d: 515 x 75 mm, height over all: 1200 mm

����������� V ��������

Funnel, made of stainless steel, for V-funnel concrete

���������

���� FB �����

Abrams slump cone for self compacting

concrete

For determination of concrete slump

��� 1000�1000�5 ��

Base plate

Plastic 1000 x 1000 x 5 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

2.05


2.06

���

Concrete

TESTING

STAR

TESTING

STAR

2.0444 + .01 + .02

��� ��� ���������

Order no. �����������

2.0442

������������

������500�300�300 ��

���

����������� 500 ��

���������

�5 ��� 7 ����

���

���

���

���

���

2.0443

2.0444

2.0444.01

2.0444.02

2.0444.03

2.0444.04

���

2.0445

TESTING

Kajima Box for concrete testing

For determination of the degree of filling of concrete,

plexiglas box with plastic base plate

w x h x d: 500 x 300 x 300 mm

Plastic filling funnel and cone, height 500 mm

With barriers to simulate reinforcement

(5 rows each with 7 barriers)

������

��������������������2

��������

����� 1�� 2�240�300�340�680 ��

Box test for concrete testing

For determination of concrete workability,

completely made of stainless steel, with

2 frames to simulate reinforcement

w x d x h1 x h2: 240 x 300 x 340 x 680 mm

����� J ��

��������������������

������ 300 ����� 16 �������

�� 16 ��� 18 ��

J-ring for concrete testing

For determination of flowability, flow time and

blocking of concrete. Steel ring galvanized

300 mm diam. for 16 interchangeable rods

diam. 16 mm or diam. 18 mm

16 ��������� 16 ��

16 single rods diam. 16 mm

16 ��������� 18 ��

16 single rods diam. 18 mm

�������

Slump cone without bedplate

���������

����900�900�2 ��

Base plate with ring-shaped marking

Stainless steel, 900 x 900 x 2 mm

L �������

���������������������

�����������������

������700�200�600 ��

L-box for concrete testing

For determination of fl owability, blocking and

separation of concrete, with funnel tube and

frame to simulate reinforcement

w x d x h: 700 x 200 x 600 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

Subject to technical modification without notice. TESTING

Concrete 2

���

��� ��� �������

Order no. 200�200�400 ��������������

��� ��� 2.0207 ��

������ DIN 1048����������

�� DIN EN 12350-4

��� Compacting container based on Walz

200 x 200 x 400 mm, complete with plastic-insert

���

and measure of plastic

DIN 1048, DIN EN 12350-4

2.0207.01

��� ���

��� 2.0208

2.0801

2.0801.01

2.0801.02

��

Accessories

�����

Measure of plastic

VEBE �����

��

230 V / 50 Hz

����������� DIN EN 12350-3��

��� BS 1881

VEBE-consistometer

Complete

230 V / 50 Hz

DIN EN 12350-3, BS 1881

FCT-101 ����������

���������������������

���� 28 �����

������������

��������������������

���������������������

������������������ 28 �

�����

������550�210�75 ��

���2.5 ��

������ 7.2 ����

FCT-101 test apparatus for freshly mixed concrete

Electrically operated, hand held unit for fast

determination of the slump, water/cement ratio

and 28-day compressive strength to be expected.

Especially suitable for frequently recurring formulas.

A probe rotating in the freshly mixed concrete

is used to determine the torque.

The slump, water/cement ratio and 28-day

compressive strength to be expected can be

ascertained from the torque and the mixing

formulas stored in the unit.

w x h x d: 550 x 210 x 75 mm

Weight approx.: 2.5 kg

Power supplied by a 7.2 volt battery unit

�� / Accessories

�����

Temperature probe

���������

Disk with transfer software

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

2.07


2.08

���

Concrete

TESTING

STAR

TESTING

STAR

TESTING

��� ��� ����������

Order no. �����������������32 mm

2.0209

2

�������� ASTM C 403

������

��� ��� ���

2.0334

������

��� ��� ���

2.0333.10

2.0333.25

2.7302

2.7302.05

2.7302.25

Pocket concrete penetrometer

For the evaluation of the initial set of concrete

mortar.

Plunger surface: 32 mm 2

ASTM C403

TESTING �������8 �

���������������������

������ DIN 1048���������� ����

�� DIN EN DIN 12350-7��������� EN 12350-7��������� ASTM ASTM

C 231����� BS 1881

Air entrainment meter TESTING, cap. 8 l

For freshly mixed concrete, with manually

operated pump, direct reading in %

DIN 1048, DIN EN 12350-7, ASTM C231, BS 1881

��

Accessories

�������

Filling hopper for air entrainment meter

����

Transport box

������ 7302 ��8 �

���������������������

������ DIN 1048���������� ����

�� DIN EN DIN 12350-7��������� EN 12350-7��������� ASTM ASTM

C 231����� BS 1881

Air entrainment meter model 7302, cap. 8 l

For freshly mixed concrete, with manually

operated pump, direct reading in %

DIN 1048, DIN EN 12350-7, ASTM C231, BS 1881

��

Accessories

������

Filling hopper for air entrainment meter

����

Transport box

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

TESTING

STAR

TESTING

STAR

TESTING

STAR

Subject to technical modification without notice. TESTING

���

���

���

���

���

��� ��� ���

���

���

���

���

��� ���������

Order no. Cube moulds, cast iron

2.0210 200�200�200 ��

2.0211

2.0212

2.0213

150�150�150 ��

100�100�100 ��

70.7�70.7�70.7 ��

�� / Accessories

2.0210.01

2.0211.01

2.0212.01

2.0214

2.0214.01

2.0214.02

2.0279

2.0279.01

2.0279.02

2.0282

������

Filling hopper for cube moulds

200�200�200 ��

150�150�150 ��

100�100�100 ��

ESTY �����

����������

150�150�150 ��

ESTY cube mould

With cast-iron base plate and plastic shell

150 x 150 x 150 mm

/ Accessories

���

Filling hopper

���

Spare plastic shell

150�150�150 ��

Combi-Mould

Base plate cast iron, shell made of plastic

/ Accessories

���

Filling hopper

���

Spare plastic shell

150�150�150 ��

TESTING cube mould

All black plastic, CFC-free

150 x 150 x 150 mm

Concrete 2

���

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

����

����������

��

TESTING �����

����������������

2.09


2.10

���

Concrete

TESTING

STAR

���

��� ���

��� ��� ���

��� ��� ���

���

��� ��� ���

���

Order no.

�������

���

Beam moulds, steel

With detachable wall elements

2.0260 400�100�100 ���20 ��

2.0261 500�100�100 ���23 ��

2.0262 600�150�150 ���44 ��

2.0263 700�150�150 ���45 ��

2.0264 750�150�150 ���47 ��

2.0265 800�200�200 ���86 ��

2.0266 560�140�140 ���38 ��

2.0260.01

2.0261.01

2.0262.01

2.0263.01

2.0264.01

2.0265.01

2.0266.01

2.0267

2.0221

2.0267.01

2.0221.01

2.0222

2.0222.01

2.0222.02

��

Accessories

�����

Adapter boxes for beam moulds

400 ���

500 ��

600 ��

700 ��

750 ��

800 ��

560 ��

��������

Cylinder mould, steel

�� 100�200 ��

�� 150�300 ��

TESTING

��

Accessories

����������

���100 ��

150 ��

Filling hopper for steel cylinder mould

Inner diameter: 100 mm

150 mm

READY �����

����������������

�� 150�300 ��

READY cylinder mould

All black plastic, CFC-free

diam. 150 x 300 mm

��

Accessories

READY ��������

Filling hopper for READY cylinder mould

����

Demoulding frame

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

TESTING

STAR

TESTING

STAR

Subject to technical modification without notice. TESTING

2.0235 + .01

��� ��� �����

Order no.

��� ��� 2.0231

���� 350�350 ���3000 �/��

230 V / 50 Hz

���

Vibrating table with pedal switch

350 x 350 mm effective area, 3000 rpm

230 V / 50 Hz

���

2.0231.01

��� ���

2.0269

���

���

��� ���

2.0234

2.0234.01

2.0235

2.0235.01

2.0235.02

��

Accessories

�����

Clamping device

��������������

���� 350�350 ���10500 �/��

230 V / 50 Hz

Concrete 2

���

Lightweight high-frequency vibrating table

with on/off switch

350 x 350 mm effective area, 10500 rpm

230 V / 50 Hz

�������������

��������1 �� 60 ��

���� 400�600 ���10500 �/��

230 V / 50 Hz

High-frequency vibrating table with timer

Timer 1 s - 60 h

400 x 600 mm effective area, 10500 rpm

230 V / 50 Hz

��

Accessories

���������

Clamping device for beam moulds

��������� HMS 1000

10000 �/�������� 25 ��

230 V / 50 Hz�1 ��

Electrical internal vibrator model HMS 1000

10000 vibrations per min., 25 mm vibrator diam.

230 V / 50 Hz, 1 kW

����� / hose length:

2.0 �

4.0 �

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

2.11


2.12

���

Concrete

TESTING

STAR

Concrete specimen curing tank

For storage of 24 test cubes 150 x 150 x 150 mm

in accordance with the relevant standards.

With double walls and insulated with polystyrene.

Inner storage container made of stainless steel,

outer wall and cover made of aluminium.

The test specimens rest on a stainless steel grating

which can be taken out. The electronically controlled

high-performance tubular heating element and the

temperature sensor are installed under this grating.

The digital display with required and actual values is

easily accessible on the outside of the curing tank.

This display is effectively seated against moisture.

230 V / 50 Hz, 1.5 kW

Inside dimensions w x d x h: 1000 x 500 x 415 mm

Outside dimensions w x d x h: 1140 x 640 x 520 mm

/ Accessories

TESTING

��� ��� �/�������

Order no. ����� 24 � 150�150�150 ����

2.0401

���������������������

������������

���������������������

���������������������

����������

230 V / 50 Hz�1.5 ��

�����������1000�500��15 ��

�����������1140�640�520 ��

��� ���

���

���

2.0401.01

2.0401.02

2.0402

�������

Base frame made of stainless steel profiled sections

Stainless steel support for storage of 15 mortarprisms

Curing tank made of plastic

For storage of 15 concrete test cubes

150 x 150 x 150 mm in accordance with the relevant

standards. Equiped with electronic temperature

control, digital display of required/actual temperature

values, high-performance tubular heating elements,

draim valve and lath(wood) grid support which

can be taken out.

Inside dimensions w x d x h: 930 x 520 x 500 mm

Outside dimensions w x d x h: 1000 x 600 x 700 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

��� 15 ����������

�����

����� 15 � 150�150�150 ����

���������������������

����������������������

�����������930�520�500 ��

�����������1000�600�700 ��

Subject to technical modification without notice.

���������


���������

TESTING

STAR

Subject to technical modification without notice. TESTING

Concrete 2

���

��� ��� �������

Order no.

��� ������ DIN 1048�ISO 7031����� ����

���

EN 12390-8�UNI �� 9533

Water impermeability tester

���

DIN 1048, ISO 7031, pr EN 12390-8, UNI 9533

2.0407 WUP 3 ��3 ����

���

��� ������

��� ���

��� ��� ��� ��� ���

���

Model WUP�3, with 3 test points

without quantitative


measurement of water penetration

2.0408

2.0409

2.0410

2.0411

2.0412.01

2.0412.02

2.0412.03

2.0407.01

2.0407.02

2.0407.03

2.0407.04

WUP 3-M ���3 ����

������

Model WUP�3-M, with 3 test points

with quantitative measurement of water

penetration �


WUP 6 ��6�� ��

��

�����

������


Model WUP 6, with 6 test points

without quantitative measurement of water

penetration

WUP 6-M ��6 ����

������

Model WUP 6-M, with 6 test points

with quantitative measurement of water penetration

/ Accessories

4 �����8 �������

Compressor cap. 4 l, 0.8 N/mm2, silent operation

�������

200�200�200 ��������� 100 ��

150�150�150 ��������� 75 ��

Roughing plate for:

specimen cubes 200 x 200 x 200 mm, 100 mm diam.

specimen cubes 150 x 150 x 150 mm, 75 mm diam.

�����

Testing device with calibrated pressure gauge for

the control of the standard test pressure

/ Spare parts

���� WU 100

Rubber gasket WU 100

���� WU 75

Rubber gasket WU 75

����

Clamping device for specimen cubes

Water gauge glass

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

���������������������

��

�����

2.13


2.14

���

Concrete

TESTING

STAR

2.0238 + .01

���

Order no.

2.0508

��� �����

���

���

��� ���

2.0238

2.0239

2.0238.01

230 V / 50 Hz�4500 ����

�����������910�600�680 ��

�����������1000�800�880 ��

Accellerated concrete strength curing tank

ASTM C 684, BS 1881

It consists of a fully insulated double wall tank

with cover, inside all from stainless steel, outside

constructed from painted steel. Insulation by

mineral wool.

The tank can take up 16 cubic 150 mm side

specimens or 16 cylindrical diam. 150 mm

specimens.

The test consists essentially in curing the concrete

specimens by the steam generated by the water

layer heated by 3 electric resistances of 1500 W

each, or curing in warm water 35 - 55°C.

The temperature range reaches 100°C.

The separate control panel comprises the main

switch, thermoregulator, timer and pilot lights.

230 V / 50 Hz, 4500 W, 1 ph

Inside dimensions w x h x d: 910 x 680 x 600 mm

Outside dimensions w x h x d: 1000 x 880 x 800 mm

��������

����� HD ��������������

Drying unit for freshly mixed concrete

Complete with HP hose and regulator,

operates on propane gas

��������

���������������

Drying unit for freshly mixed concrete

Complete with hose,

operates on natural gas

/ Accessories

TESTING

�����������

�������� ASTM C 684����� BS

1881

���������������������

�������������� 16 ���� 150

���������� 16 ���� 150 ���

�����

������������ 35-55°C ����

��

���� 3 � 1500 ������������

���� 100°C�

���������������������

���

���������

300�500�100 ��

Drying pan made of galvanized steel

300 x 500 x 100 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

Subject to technical modification without notice.

���������


���������

TESTING

STAR

Subject to technical modification without notice. TESTING

��� ��� ���������

Order no.

2.0301

����������������

ZTV-SIB 90

���

���

���

��� ��� ���

2.0302

���

��� ���

2.0301.01

2.0301.02

2.0301.03

2.0301.05

2.0413

2.0413.01

Concrete 2

���

Speedy moisture tester

For determination of moisture in building materials,

carrying case made of wood.

ZTV-SIB 90

� 2.0301������

��������

As 2.0301, but case made of metal

(Simple version)

Accessories

Electronic balance type 466, battery operated,

Weighing range (max.) 80 g, readout 0.1 g

Test sieve, 100 mm diam., mesh size 2.0 mm

������100 �

Calcium carbide ampoules, 100 ea.

Calcium carbide ampoules, 20 ea.

Abrasion machine based on Böhme

DIN 52108

��

Accessories

Abrasives, 50 kg

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

������ 466��������������

80 ����� 0.1 �

����� 100 ������� 2.0 ��

������20 �

�������

������ DIN 52108

����50 ��

2.15


2.16

���

Concrete

TESTING

STAR

TESTING

��� ��� �������� SKF 849 A

Order no.

2.0417

�������������������

���������������������


������ �� 280�200 ��

������� 50-150 ��

����� 0.4-0.8 �/��

����� �� 230 ��

���

������800�1400�1400 ��

���� 350 ��

��� ���

2.0418

2.0417.01

230/400V / 50Hz�3 ��

Stone calibrating milling machine SKF 849 A

For the horizontal surface milling of concrete

paving setts and cubes.

With two quick-gripping units, splash-guard-shroud,

and water feed.

Maximum dimensions: 280 x 200 mm

Height of the specimens 50 - 150 mm

Transportation speed 0.4 - 0.8 m/min.

Diamond milling cutter diam. 230 mm

w x d x h: 800 x 1400 x 1400 mm

Weight: approx. 350 kg

230/400 V / 50 Hz, 3 kW

�������� SKF 849 B

���������������������

���

���������������������


������ �� 300�500 ��

������� 60-300 ��

������ �� 150 ��

����� 0.4-0.8 �/��

����� �� 400 ��

������900�1500�1400 ��

���� 410 ��

230/400V / 50Hz�4 ��

Stone calibrating milling machine SKF 849 B

For the horizontal surface milling of concrete

paving setts, cubes and cylinders.

With two quick-gripping units, splash-guard-shroud,

and water feed.

Maximum dimensions: 300 x 500 mm

Height of the specimens 60 - 300 mm

Cylinders up to: diam. 150 mm

Transportation speed 0.4 - 0.8 m/min.

Diamond milling cutter diam. 400 mm

w x d x h: 900 x 1500 x 1400 mm

Weight: approx. 410 kg

230/400 V / 50 Hz, 4 kW

�� / Accessories

�� SKF 849A�B ���������

������400�600�400 ��

Mobile water decantation tank for SKF 849 A + B

w x d x h: 400 x 600 x 400 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

Subject to technical modification without notice. TESTING

Concrete 2

���

��� ��� ����

Order no. ���������������������

2.0297

����

���������������������

���� 330 ���������������

�������������������

���������������������

8 �����100�150 � 200 ��������

���

��� ��� ���

���

2.0297.01

2.0297.02

2.0297.03

����� 680�300 ��

����� 330 ��

������� 375 ��

��������300 �����

360 �����

��������230 ��

����� 1400 �/��

������ 1 ��

������ 1300�1500�1100 ��

���380 ��

400V / 50Hz�3 �

Specimen grinding machine

Used to grind and polish concrete specimens,

natural stones, ceramic materials etc..

The cube and cylinder specimens can be easily

locked on the table. The grinding head 330 mm

diam. can be radially moved either manually

or automatically in both directions. So the only

manual operation requested is the lowering of the

grinding head by the top hand wheel.

The machine is supplied complete with chip guard,

coolant tank, motor pump, one set of abrasive

sectors and clamping elements for 100, 150

and 200 mm cubes.

Table dimensions: 680 x 300 mm

Grinding wheel diam.: 330 mm

Max. vertical daylight between

table and wheel head: 375 mm

Max. specimen size: up to 300 mm cubes

cylinders up to 360 mm height

Vertical travel of the wheel speed: 230 mm

Grinding wheel speed: 1400 rpm

Grinding spindle motor: 1 kW

w x h x d: 1300 x 1500 x 1100 mm

Weight approx.: 380 kg

400 V / 50 Hz, 3 ph

/ Accessories

Set of 8 diamond grinding sectors

Clamping device for concrete cyl. 150 + 160 mm

���������

Special fixing device from stainless steel

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

1 ������

������� 150�160 ��

2.17


2.18

���

Concrete

TESTING

STAR

Hand-held drill CEBOR

For drilling diameters up to 100 mm

Dry and wet drilling, fittings for water or dust extractor.

With electric motor: 700 / 1300 rpm

230 V / 50 Hz, 1.85 kW

230 V / 50 Hz�1.85 ��

Hand-held drill H 80 with drill column

For drilling diam. up to 130 mm, drill travel 600 mm

Wet drilling machine with fittings for water.

With electric motor: 700 / 1300 rpm

230 V / 50 Hz, 1.85 kW

��

Accessories for dry drilling

�����

Dust extractor

��

Accessories for wet drilling

���� 10 ������5 ���

Pressurised water tank, 10 l with handpump + 5 m hose

Drill bits for wet drilling, connection R 1/

����� R

2“

1 /2 ��

���� 50 ������350 ��

Drill bit for drill core diam. 50 mm, l = 350 mm

���� 100 ������350 ��

Drill bit for drill core diam. 100 mm, l = 350 mm

Drill bit for drill core diam. 150 mm, l = 350 mm

Drill bit for dry drilling, 1 1/ 4“ UNC

TESTING

��� ��� CEBOR ��

Order no.

2.0601

����� 100 �����

���������������������

��� ����700 / 1300 �/��

230 V / 50 Hz�1.85 ��

��� ���

��� ���

���

��� ��� ���

��� ��� ��� ���

2.0602

2.0625

2.0601.02

2.0601.03

2.0601.04

2.0601.05

2.0601.06

2.0601.07

2.0601.08

����� H 80 ��

����� 130 �������� 600 ����

�������������

����700 / 1300 �/��

���� 150 ������350 ��

����� R 1 /4UNC ��

���� 50 ������350 ��

Drill bit for drill core diam. 50 mm, l = 350 mm

���� 100 ������350 ��

Drill bit for drill core diam. 100 mm, l = 350 mm

���� 150 ������350 ��

Drill bit for drill core diam. 150 mm, l = 350 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

Subject to technical modification without notice. TESTING

Core drill H 200

For drilling diameters up to 200 mm

Wet drilling machine, 600 mm drill travel

Aluminium drill column with carriage and integrated

angle drilling joint

With electric motor: 330 / 570 / 800 rpm

230 V / 50 Hz, 2.6 kW

Accessories

Pressurised water tank, 10 l with handpump + 5 m hose

��������������

Vacuumset with vacuum pump and sealing set

Drill bits for wet drilling, connection R 1/ 2“

Concrete 2

���

��� ��� H 200 ���

Order no.

����� 200 �����

2.0605

���600 ����

�������������������

��������������

���

���

���

���

��� ��� ��� ����330 / 570 / 800 �/��

230 V / 50 Hz�2.6 ��

2.0601.02

2.0605.01

2.0605.02

2.0605.03

2.0605.04

Drill bit for drill core 50 mm diam., l = 350 mm

Drill bit for drill core 100 mm diam., l = 350 mm

Drill bit for drill core 150 mm diam., l = 350 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

���� 10 ������5 ���

����� R 1 /2 ��

���� 50 ������350 ��

���� 100 ������350 ��

���� 150 ������350 ��

2.19


2.20

���

Concrete

Road core drilling machine BW 300 hydraulic

Mounted on single-axle trailer.

Hydraulic drill feed, finely adjustable. Raising and

lowering of drill platform is performed hydraulically.

2-speed gearbox

Max. hole diameter: 400 mm

Max. travel: 650 mm

Drill bit connection: 1 1/

��� � 1200 ��

4“ UNC stub

Drill bit speed: 350/560 rpm

Engine output: 9.6 kW

Type of petrol engine: Honda GXV 390

Tank capacity: 300 l

l x w x h: 3300 x 1660 x 1800 mm

Sound pressure level: 92.7 db(A)

Sound power level: 107.3 db(A)

Weight: approx. 1200 kg

Diamond drill bits for:

• asphalt: order no. + A

• concrete: order no. + B

���� 50 ������450 ��

Drill bit for drill core diam. 50 mm, l = 450 mm

Drill bit for drill core diam. 100 mm, l = 450 mm

Drill bit for drill core diam. 150 mm, l = 450 mm

Drill bit for drill core diam. 200 mm, l = 450 mm

Drill bit for drill core diam. 250 mm, l = 450 mm

Other dimensions on request

TESTING

��� ��� BW 300 �������

Order no.

2.0620

��������

���������������������

���

2 ����

������� 400 ��

����� 650 ��

����� R 1 /4UNC ��

����� 350/560 �/��

������ 9.6 ��

��� ����� Honda GXV 390 �

��� ��� ���

��� ��� ���

���

����

300 �

92.7 db (A)

����� 107.3 db (A)

������ 3300�1660�1800 ��

2.0620.01

2.0620.02

2.0620.03

2.0620.04

2.0620.05

�������

�����������

� �������+B

���� 100 ������450 ��

���� 150 ������450 ��

���� 200 ������450 ��

���� 250 ������450 ��

�������

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

TESTING

STAR

2.0247

2.0256 + 2.0256.01

2.0248

Subject to technical modification without notice. TESTING

2.0249

Concrete 2

���

��� ��� ��� PROCEQ ������

Order no.

���

����������

������ DIN 1048�� 2 ��

PROCEQ concrete test hammer by Schmidt

For non-destructive testing of concrete

DIN 1048, p. 2

2.0247

���

���

���

���

���

2.0256

2.0256.01

2.0248

2.0247.01

2.0249

2.0250

N �

����2.207 ��

�����10 – 70 ��/����

����������������

Model N

Impact energy: 2.207 Nm

Measuring range: 10 - 70 N/mm 2

For testing of concrete parts and structures

�����

N ���� GEOTOP

Alternative:

Model N, type GEOTOP

������ N ���� GEOTOP

������

Testing anvil for model N, type GEOTOP

Used to check correct operation

NR �

� N �������

Model NR

As model N, but with recording device

���� N/NR

������

Testing anvil for model N/NR

Used to check correct operation

L �

����0.735 ��

�����10 – 70 ��/����

����������������

Model L

Impact energie: 0.735 Nm

Measuring range: 10 - 70 N/mm 2

For testing of impact-sensitive parts of concrete or

artificial stone

LR �

� L ��������

Model LR

As model L, but with recording device

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

2.21


2.22

���

Concrete

2.0253, 2.0254, 20258

Model LB

Impact energie: 0.735 Nm

Measuring range: 10 - 70 N/mm 2

Used to check the quality of brick and clay

products - special design of impact plunger tip

������

Testing anvil for model L/LR

Used to check correct operation

Model P

Impact energie: 0.883 Nm

Measuring range: 5 - 30 N/mm 2

For testing of light-weight building materials, plasterworks

and low strength concrete

Model PT

Impact energie 0.883 Nm

Measuring range: 0.2 - 5 N/mm 2

With larger impact surface for construction

material with low compressive strength

��������

Model PM

Impact energy 0.883 Nm

For testing of masonry mortar

Model P/PT/PM testing anvil

�� / Spare parts

�� NR�LR ������5 �

Recording paper for models NR and LR, 5 rolls

��

Abrasive grinding wheel

TESTING

��� ��� LB �

Order no.

2.0251

����0.735 ��

�����10 – 70 ��/����

���

���������������������

��

���

���

2.0249.01

���

���

���

���

���

2.0253

2.0254

2.0258

2.0253.01

2.0248.01

2.0248.02

���� L/LR

P �

����0.883 ��

�����5 – 30 ��/����

������������������

PT �

����0.883 ��

�����0.2 – 5 ��/����

������������������

PM �

����0.883 ��

���� P/PT/PM

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

TESTING

STAR

Subject to technical modification without notice. TESTING

Concrete 2

���

��� ��� DIGI ��� 2 �������

Order no.

2.0255

������������ ND ����

���� 2.207 ��

��������� 10 – 70 ��/����

������ ±0.2R

������ ±0.5R

����� - 10 �+60°C

��� ���

���������������� 5000 ��

��

��� 128�128 ������ LCD

���RS 232 C

�������������������

6 � LR 6 1.5 ��������� 60 ��

����������������

2.0255.01

DIGI-Schmidt 2 electronic concrete test hammer

For extensive measurements, complete

with model ND

Impact energie: 2.207 Nm

Measuring range compressive strength: 10 - 70 N/mm 2

Accuracy of measurement: ± 0.2 R

Consistency of measuring values: ± 0.5 R

Temperature range: -10 to +60°C

Display with nonvolatile memory for

5000 measured values.

Display on 128 x 128 mm graphic LCD

Interface: RS 232 C

Integrated software for printing the values and

transfer to PC.

Battery operation with 6 batteries LR 6, 1.5 V,

for 60 h.

Supplied with cable, grinding stone, carrying strap

and case.

��

Accessories

�����

Printer cable

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

2.23


2.24

���

Concrete

TESTING

STAR

��

Accessories

Aluminium pulling plates, 50 mm diam., 10 ea.

��������� 50 ���10 �

Stainless steel pulling plates, 50 mm diam., 10 ea.

Other pulling plates on demand

TESTING

��� ��� �������

Order no. ���������������������

�������������������

��������������

�����1 ���������1 ������

1 �������������

���

���

Pull-off tester

For measuring the tensile strength of concrete and

��� ��� the adhesive strength of facing plasters, mortars,

��� ���

coatings, paints and lacquers on its supports.

Indication of force by gauge or digital display,

hand operated.

Total supply: Pull-of tester, 1 draw bolt, 1 pulling

plate, calibration certifi cate and carrying case

10.0331

10.0332

10.0333

10.0334

10.0335

10.0336

10.0337

10.0338

10.0339

10.0310

10.0331.03

10.0331.04

10.0331.05

5kN – ��

16kN – ��

25kN – ��

50kN – ��

1kN – ����

2.5kN – ����

5kN – ����

16kN – ����

25kN – ����

50kN – ����

�������� 50 ���10 �

��������

����������

Two-component bonding agent for concrete

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

2.1028

2.1030

2.1031

Subject to technical modification without notice. TESTING

Concrete 2

���

��� ��� 4 ���������

Order no. 1500�2000�3000 �������

��� 1 �� 2 ������������

���������������������

���������������������

DIN 51220, 51223- ASTM C 39, E4-AASHTO T2,

T71-BS 1610 Grade 1.0-NF P18-411-UNI

6686-UNE 7242, 83304

���

- �������������������

- �����������

- ������250 ��

- ��������

�� 150 � 160 �������� 150 ��

- ���� 1500 � 2000 ���5 ��

3000 ���10 ��

600 ���2 ��

����

- ��������

- ������������

- RS 232 ��������

- �������

2.1005.01

2.1005.02

2.1014.01

2.1034.01

2.1003.01

2.1022.01

2.1022.02

2.1003.02

��������������������

���������������������

� 60����������������

�������336 ��

�����

1500 ����� 216 ��

2000 ����� 287 ��� 510�310 ��

3000 ����� 287 ��� 510�310 ��

�������������

��������1%

������ 50 ��

������900�600�1500 ��

����������600 – 1300 ��

230 V / 50 Hz���

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

�����������

�������� 0 – 500 ���1500 ���

�������� 0 – 600 ���2000 ���

�������� 0 – 1000 ���3000 ���

� CE ����������������

� CE �����������������

���������� 510�310 �����

�����������

2.25


2.26

���

Concrete

TESTING

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

2.1028

2.1030

2.1031

Subject to technical modification without notice. TESTING

���

Order no.

2.1005.01

2.1005.02

2.1014.01

2.1034.01

2.1003.01

2.1022.01

2.1022.02

2.1003.02

Concrete 2

���

Compression testing machines with

4 columns frame, standard design

1500, 2000 and 3000 kN

Optional with 1 or 2 pressure gauges respectively

digital display.

Three options for pressure generation: hand pump,

multipiston electric pump with manual control,

multipiston electric pump with servocontrol.

DIN 51220, 51223-ASTM C39, E4-AASHTO T22,

T71-BS1610 Grade 1.0-NF P18-411-UNI 6686-

UNE 7242, 83304

Pressure gauge

- Pressure gauge fitted with max. load pointer,

zero adjustement and damping system

- Low pressure gauge is protected from overloads

- Gauge diameter: 250 mm

- With specific resistance scales for: cylinders

diam. 150 and 160 mm and cubes 150 mm side

- Gauges divisions: 1500 and 2000 kN: 5 kN

3000 kN: 10 kN

600 kN: 2 kN

Digital display

- Digital Display for force and strength

- Preselection of pace rate and indication by flow bar

- RS 232 port, connector to printer

- Storage of test results

Device to check piston‘s excursion during test,

hydraulic 100% sure device to stop automatically

the piston‘s stroke at its max. excursion,

compression platens are hardened 60 HRC

and rectified,

easy motion of upper compression platen by

accurately machined ball seating.

Max. vertical clearance: 336 mm

Platens diameter:

1500 kN: 216 mm

2000 kN: 287 mm or 510 x 310 mm

3000 kN: 287 mm or 510 x 310 mm

Please consult the adjacent machine table for information

on distance pieces (spacers) for reduction

of the vertical clearance.

Accuracy and repeatability: ±1%

Max. ram travel: about 55 mm

Overall dimensions w x d x h: 900 x 600 x 1500 mm

Net weight: 600 - 1300 kg

230 V / 50 Hz, 1 ph

Accessories

Strip printer for digital display

Dual low capacity digital range 0 - 500 kN (1500 kN)

Dual low capacity digital range 0 - 600 kN (2000 kN)

Dual low capacity digital range 0 - 1000 kN (3000 kN)

Safety guards acc. CE standards for machines

with round platens

Safety guards acc. CE standards for machines

with retangular platens

Control screw for adjusting the hight of the

upper compression plate 510 x 310 mm

Welded bench to set the press at a proper height

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

2.27


2.28

���

Concrete

Available models

1500 kN

...

...

...

...

...

2000 kN

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

platens diam. 216 mm

...

...

...

...

...

platens diam. 287 mm

...

...

...

...

...

...

...

platens 510 x 310 mm

...

...

...

...

...

...

...

hand-operated

...

motorized

...

...

...

hand-operated

...

motorized

...

...

...

...

...

hand-operated

...

motorized

...

...

...

...

...

1 gauge

2 gauge 600 and 1500 kN

1 gauge

2 gauges 600 and 1500 kN

Electronic computerized digital display

measuring system

Automatic, servocontrolled

1 gauge

2 gauges 600 + 2000 kN

1 gauge

2 gauges 600 + 2000 kN

Electronic computerized digital display

measuring system

Automatic, servocontrolled

Straintest version with electronic computerized

digital display measuring system

Straintest version, automatic, servocontrolled

1 gauge

2 gauges 600 + 2000 kN

1 gauge

2 gauges 600 + 2000 kN

Electronic computerized digital display

measuring system

Automatic, servocontrolled

Straintest version with electronic computerized

digital display measuring system

Straintest version, automatic, servocontrolled

Order no.

2.1001

2.1002

2.1003

2.1004

2.1005

2.1006

2.1010

2.1011

2.1012

2.1013

2.1014

2.1015

2.1016

2.1017

2.1018

2.1019

2.1020

2.1021

2.1022

2.1023

2.1024

2.1025

notice.

without modification technical to Subject

3000 kN platens diam. 287 mm hand-operated 1 gauge

2.1026

... ...

...

2 gauges 600 + 3000 kN

2.1027

... ...

motorized 1 gauge

2.1028

... ...

...

2 gauges 600 + 3000 kN

2.1029

... ...

...

Electronic computerized digital display 2.1030

... ...

measuring system

... ...

...

Automatic, servocontrolled

2.1031

...

Straintest version with electronic computerized 2.1032

... ...

digital display measuring system

...

Straintest version, automatic, servocontrolled 2.1033

... platens 510 x 310 mm hand-operated 1 gauge

2.1034

... ...

...

2 gauges 600 + 3000 kN

2.1035

... ...

motorized 1 gauge

2.1036

... ...

...

2 gauges 600 + 3000 kN

2.1037

... ...

...

Electronic computerized digital display

measuring system

2.1038

... ...

...

Automatic, servocontrolled

2.1039

... ...

...

Straintest version with electronic computerized 2.1040

digital display measuring system

... ...

...

Straintest version, automatic, servocontrolled 2.1041

Distance pieces to reduce the vertical clearance between the compression platens

for cubes 150 mm: h = 176 mm, machine 1500 and 2000 kN

for cubes 100 mm: h = 50 mm, machine 1500 and 2000 kN

for cylinders 100 x 200 mm and 110 x 220 mm: h = 100 mm, machine 1500 and 2000 kN

for cubes 200 mm: h = 126 mm, machine 2000 and 3000 kN

for cubes 150 mm: h = 50 mm, machine 2000 and 3000 kN

for cubes 100 mm: h = 50 mm, machine 2000 and 3000 kN

for cylinders 100 x 200 mm and 110 x 220 mm: h = 50 mm, machine 2000 and 3000 kN

TESTING

2.1001.01

2.1001.02

2.1001.03

2.1010.01

2.1010.02

2.1010.03

2.1010.04

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

���������


���������

Subject to technical modification without notice. TESTING

Concrete 2

���

��� ��� �������/��������

Order no. ����

2.1086 ������� 3000 ��

������ DIN 51220��� 2�

ISO 4012��� 1

���������������������

��������

����� 120 – 3000 ��

����� 300 ��

������� 320 ��

��� 50 ��

400 V / 50 Hz

2.1085.01

2.1085.02

2.1085.03

2.1085.06

2.1085.07

2.1085.08

2.1085.09

2.1085.10

2.1085.11

2.1085.12

2.1085.13

2.1086.01

2.1086.03

2.1086.04

2.1086.05

��������

��� 210�210�110 ��

��� 170�170��50 ��

��� 120�120��50 ��

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

�����

�� 320�520 ��

��� 300 �������

����

���������

�� 300 ��

320�520 ��

����������

���� 100 ������

�������������

��� BCD ���

����� EP-5030

�������������� kN �����

���������/�����������

�����������

���������������� DIN 51302

� 2 ������� BS 1881-115�����

10002-2

2.29


2.30

���

Concrete

���

Order no.

2.1086

2.1085.01

2.1085.02

2.1085.03

2.1085.06

2.1085.07

2.1085.08

2.1085.09

2.1085.10

2.1085.11

2.1085.12

2.1085.13

2.1086.01

2.1086.03

2.1086.04

2.1086.05

Compression and bending testing machines,

heavy duty design

Compression testing machine 3000 kN

DIN 51220, 51223; class 2

ISO 4012; class 1

With electronic measurement of pressure,

manual control, digital display, peak values

memory, electronic load pacer

Measuring range 1: 120 - 3000 kN

Platens: 300 mm diam.

Test chamber size: 320 mm

Piston stroke: 50 mm

400 V / 50 Hz

For reduction of the test chamber size:

Distance piece 210 x 210 x 110 mm

Distance piece 170 x 170 x 50 mm

Distance piece 120 x 120 x 50 mm

Accessories

Quick-release valve

Platens 320 x 520 mm

(Instead of 300 mm diam.)

Chrome-plated columns

Protective grid for machine with platens:

300 mm diam.

320 x 520 mm

Electrical piston stroke limiter

Extension of piston stroke to 100 mm

Prefilling pump for faster piston stroke

BCD-output for printer

TESTING

Tape printer, model EP-5030

(Data, specimen No., type of specimen breaking

load in kN and strength in N/mm 2 )

Preparation for the later installation of a bending

testing machine

Extra charge for the strain test type

acc. to DIN 51302 p.2, BS 1881-115, EN 10002-2

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

Subject to technical modification without notice. TESTING

Concrete 2

���

��� ��� �������/��������

Order no. ����

2.1089 ��/�������� 3000/100 ��

������ DIN 51220�51223��� 2�

ISO 4012��� 1

���������������������

��������

������� 200 – 3000 ��

������� 6 – 100 ��

����� 300 ��

�������������� 320 ��

���������� 50 ��

��������������� 220 ��

�����������

400 V / 50 Hz

220 ��

2.1085.01

2.1085.02

2.1085.03

2.1085.06

2.1085.07

2.1085.08

2.1085.09

2.1085.10

2.1085.11

2.1085.12

2.1085.13

2.1086.01

2.1086.03

2.1087.01

2.1087.02

2.1087.03

��������

��� 210�210�110 ��

��� 170�170��50 ��

��� 120�120��50 ��

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

�����

�� 320�520 ��

��� 300 �������

����

���������

�� 300 ��

320�520 ��

����������

���� 100 ������

�������������

��� BCD ���

����� EP-5030

�������������� kN �����

���������/�����������

������������������

DIN1048 ��������

����������

����������

�� 230 ����������

2.31


2.32

���

Concrete

���

Order no.

2.1089

2.1085.01

2.1085.02

2.1085.03

2.1085.06

2.1085.07

2.1085.08

2.1085.09

2.1085.10

2.1085.11

2.1085.12

2.1085.13

2.1086.01

2.1086.03

2.1087.01

2.1087.02

2.1087.03

Compression and bending testing machines,

heavy duty design

Compression/bending testing machine

3000/100 kN

DIN 51220, 51223; class 2

ISO 4012; class 1

With electronic measurement of pressure,

manual control, digital display, peak value memory,

electronic load pacer.

Compression range: 200 - 3000 kN

Bending range: 6 - 100 kN

Platens: 300 mm diam.

Test chamber size of

compression tester: 320 mm

Piston stroke of

compression tester: 50 mm

Test chamber size of

bending tester: 220 mm

Piston stroke of

bending tester: 220 mm

400 V / 50 Hz

For reduction of the test chamber size:

Distance piece 210 x 210 x 110 mm

Distance piece 170 x 170 x 50 mm

Distance piece 120 x 120 x 50 mm

Accessories

Quick-release valve

Platens 320 x 520 mm

(Instead of 300 mm diam.)

Chrome-plated columns

Protective grid for machine with platens:

300 mm diam.

320 x 520 mm

Electrical piston stroke limiter

Extension of piston stroke to 100 mm

Prefilling pump for faster piston stroke

BCD-output for printer

Tape printer, model EP-5030 (date, specimen No.,

type of specimen, breaking load in kN and strength

in N/mm 2 )

Blade holder for two upper blades for

three-point loading as per DIN 1048

Pressure piston for curb testing

TESTING

Platen insert in bending chamber, 230 mm diam.,

top platen with pendulum axle

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


TESTING

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

2

2.33


2.34

General Conditions

Sale and Delivery

General Conditions of Sale and Delivery

§ 1 General

The following terms and conditions shall apply to all deliveries, offers

and agreements, including those made in future. Terms and conditions

of the Orderer deviating therefrom shall be binding for us only if

they are expressly acknowledged by us in writing.

§ 2 Offers, Conclusion of Contract

(1)

(2)

(3)

(4)

(1)

(2)

(3)

(4)

(5)

(1)

Our offers are offers without engagement. The supporting documents,

such as drawings, illustrations and descriptions which

are attached to our offers are only approximately authoritative

unless they are expressly termed binding. Our supporting documents

must not be reproduced or used otherwise for own

commercial purposes of the Buyer without a permission to this

effect.

The order placed by the Customer is a binding offer. We may

accept this offer at our discretion within two weeks by sending

a written order confirmation or by delivering the ordered goods

to the Orderer within the said period of time.

The order must contain clear order data in respect of quantity

and designation. If inaccurate or contradictory data are provided,

we shall not accept any responsibility for incorrect deliveries

resulting from inaccurate data provided by the Customer.

(4) Any modification or cancellation of the order by the Orderer

may be taken into account only if made in writing, if received by

us in writing not later than eight days before the delivery is effected

and if we agree in writing to the cancellation and/or modification.

§ 3 Prices

Our prices are shown as net prices in DM and/or in EUR, exclusive

of value-added tax. Our prices are to be understood ex

works plus packing unless something else is stated in the order

confirmation.

The minimum order value is DM 75/EUR 38 plus value-added

tax. If the order value is below the said amount, a handling fee

of DM 25/EUR 13 plus value-added tax will be charged.

As far as contracts with an agreed delivery period of more than

four months are concerned, we reserve the right to increase the

prices in accordance with cost increases that have occurred due

to collective agreements or increases in the costs of materials.

If the increase exceeds the agreed price by more than five per

cent, the Orderer shall be entitled to cancel the order.

If payment in a foreign currency is agreed, changes in exchange

rates shall be borne by the Orderer.

Packing and freight costs shall be charged additionally. Loan

packing, shuttle packing and loan pallets shall remain our property

and are to be returned with the next delivery in an impeccable

condition at the expense of the Customer. If the packing

is not returned within one month of the delivery, we shall charge

its cost.

§ 4 Periods of Delivery

The periods of delivery indicated in the order confirmation are

not binding for us although these time periods are planned with

very great diligence. A delay in delivery shall in no event constitute

a cause for a cancellation of an order unless this has been

expressly agreed upon.

TESTING

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

(2)

(3)

(4)

(5)

(1)

(2)

(3)

(4)

(1)

(2)

If the delivery is delayed by the occurrence of events beyond our

control (e. g. operational breakdowns, intervention by authorities,

lack of raw materials, industrial disputes etc.), the period of

delivery shall be prolonged to an adequate extent. If a delivery

becomes impossible on account of the same reason, we shall

be released from the obligation to deliver.

We will be in delay only if an additional period of time of at least

two weeks was granted to us. A withdrawal from the contract on

account of delay, too, is possible only after an additional period

of time of at least two weeks was granted to us in writing by the

Orderer. If our delivery is delayed, our obligation to pay damages

is limited to an amount of 30% of the foreseeable damage

in the event of slight negligence. Further-reaching claims for

damages do only exist if the delay is caused by intent or gross

negligence.

We are entitled to adequate part deliveries.

If the Orderer is in default in payment or if he suffers a financial

collapse, we shall have the right to refuse all further deliveries.

§ 5 Payments, Default in Payment

Commercial invoices are due and payable 14 days after the

invoice date without any deduction. The terms of payment for

Customers with a business account are as follows: 14 days 2%,

30 days net; for Customers abroad: 30 days net; for new

Customers: cash in advance and/ or cash on delivery.

If the time allowed for payment indicated in sub-paragraph 1

is exceeded, the Orderer gets into delay without a request for

payment having been made. Starting from the day of the delay

we have the right to demand default interest in the amount of

9.5% p. a. The assertion of any further-reaching damage shall

remain unaffected hereby. All accounts receivable shall become

due and payable immediately. If in deviation herefrom an extension

of the term of payment or another later date of maturity

were agreed upon, the account receivable shall nevertheless

become due and payable as a whole if the Orderer does not

meet his payment obligations or his obligations resulting from

the agreed reservation of title (cf. § 7), if he discontinues his

payments, if information is available which substantiates considerable

and justified doubts about his creditworthiness or if

insolvency proceedings are initiated in respect of his property.

Bills of exchange and cheques are accepted as payment. The

acceptance of bills of exchange requires a prior agreement on

a case-by-case basis and is made subject to the condition that

the bills are discountable with a maturity not exceeding 90 days.

Cost and charges are to be borne by the Orderer.

The Orderer may set off against our accounts receivable only

uncontested accounts receivable or accounts receivable recognised

by declaratory judgement.

§ 6 Passage of Risk, Warranty

The risk of accidental loss and of accidental deterioration shall

pass to the Orderer at the latest when the goods are delivered

to the forwarder, at the latest when they leave the works, also

when we have assumed still other services, for instance transportation

to the Customer and their installation. If the delivery

is delayed for reasons not attributable to us, the risk shall pass

when the communication of readiness for dispatch is given.

It is the responsibility of the Customer to accept a delivery only

after a thorough inspection of the packing and of the content

and not to throw away anything without having satisfied himself

that no item is still left within the package.


(3)

(4)

(5)

(6)

(7)

(8)

(1)

(2)

(3)

TESTING

The Orderer shall be obliged to inspect the goods delivered

by us without any delay even when they are still

in their packing. The inspection is to be made in accordance

with the single sampling schedule for normal

assessment.

Any defect of the goods shall be reported to us, and the

complaint is to be defined in a verifiable manner; the

complaint is to be made in writing by registered letter

with return receipt. External damage to the transport

packing shall be noted immediately on the forwarder’s

bill of lading in his presence, and the damage must be

reported to the forwarder. Hidden damage to the goods

in transit is to be reported to the forwarder within a

period of four days at the latest. An application is to be

made for a date for the inspection. Obvious defects

must be reported in writing without delay, not later than

within a period of eight working days of the receipt of the

goods.

In the event of a defect that is attributable to us, we are

entitled at our discretion to remedy the defect or to make

a substitute delivery. If the defect is remedied, we shall

be obliged to bear all expenses required for the purpose

of remedying the defect provided that these expenses

are not increased by the fact that the object of purchase

was transported to a place other than the place of performance.

If the removal of the defect fails or if we are not willing

or not able to remedy the defect or to make a substitute

delivery or if the same is delayed beyond appropriate

time periods on account of reasons attributable to us,

the Orderer shall be entitled to withdraw from the contract

or to demand a reduction of the purchase price.

Further-reaching claims of the Orderer, in particular

claims for damages, including lost profit or on account

of other damage to property are ruled out. This limitation

of liability does not apply if the cause of the damage is

due to intent or gross negligence or when the Orderer

asserts a claim to damages on account of a lack of a

guaranteed quality. If an essential obligation under the

Contract is violated by negligence, our liability shall be

limited to the foreseeable damage.

The period of guarantee is six months after the handingover

of the object of purchase. The same period shall

also apply to claims for compensation for consequential

damage caused by defects provided that no claims are

asserted on account of tortious acts.

§ 7 Retention of Title, Security Interests

The goods delivered remain our property until all our

invoices under the business relationship have been paid.

If goods have already been included in a current invoice,

the retention of title shall apply to the respective balance.

The taking back of the goods as well as the attachment

of the delivery item by us do not constitute a withdrawal

from the Contract.

The Orderer may process the goods in the ordinary

course of business or resell them within the framework

of the agreement on the retention of title. He shall not

be entitled to any other kind of disposal. In the event

of the non-observance of his payment obligations or in

the event of other gross violations of the Contract, the

Orderer’s right of utilisation shall expire.

(4)

(5)

(6)

(7)

(8)

(1)

(2)

General Conditions

Sale and Delivery

The processing of the goods under retention of title is

made on our behalf (§ 950 of the German Civil Code).

If the goods are processed jointly for several suppliers,

we shall be entitled to co-ownership pursuant to § 947 f.

of the German Civil Code.

The Orderer shall assign to us the claims and ancillary

rights arising from a resale, in the event of processing,

in accordance with our share of the ownership. He

shall not be entitled to agree upon a ban on assignment.

In the event of a partial payment by the Orderer, the

account receivable assigned to us shall be deemed settled

last. The Orderer shall be entitled to collect the

assigned account receivable in the ordinary course of

business; our authority to collect shall remain unaffected

by the Buyer’s authority to collect. Upon our request,

the Orderer shall have to provide to us the names of

the debtors of the assigned accounts receivable and to

inform the debtors of the said assignment to us.

The retention of title is subject to the condition that upon

the payment in full of all our accounts receivable from

the business relationship the title to the goods under

retention of title will pass directly to the Orderer and that

the Orderer shall be entitled to the assigned accounts

receivable.

We are obliged to release upon the request of the

Orderer the securities to which we are entitled to the

extent to which the value of the securities furnished to

us exceeds by more than 20 % the accounts receivable

to be secured. If several securities were provided, we

shall be free to decide which of the securities will be

released.

If our title to the goods is impaired by third parties, in

particular if the goods are attached, the Orderer shall

be obliged to inform us immediately, to send us the supporting

documents that are available to him and to draw

the attention of the third party to our title. Expenses arising

for us by the impairment of title shall be borne by the

Orderer.

§ 8 Software

We cannot be held accountable for any malfunction resulting

from the environment into which our software is integrated.

We do not warrant that the programme functions correspond

to the requirements of the Buyer and that the programmes

will work without fault. The Customer alone shall be responsible

for the selection of the hardware and software which

he uses for obtaining a desired result. Moreover, he shall be

responsible for the installation and the operation of the programmes

as well as for the results.

§ 9 Final Provisions

The statutory provisions shall apply if no other provisions

were expressly agreed upon in the present Terms

and Conditions. German law shall apply to all orders

placed with us.

The place of jurisdiction for all disputes arising from the

present Contract is Berlin. The place of performance is

the seat of our Company.

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

13

2.35


2.36

TESTING

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

More magazines by this user
Similar magazines