Cement 1 - Testing Equipment for Construction Materials

testing

Cement 1 - Testing Equipment for Construction Materials

�����������

TESTING

�������������������

������������������������

����������������������������������������

�����

��������

����������

������������������������

��������

Testing equipment for cement, plaster, mortar, concrete, asphalt, soil and steel

Testing equipment for

construction material

and laboratory furnishings

from Berlin

�����������������������������

����������������

����������

Equipment for construction repair and restoration

������� TESTING �������� Equipment for measurement of moisture

Systems for accredited concrete testing stations

Complete laboratory systems and furnishings for industrial and

vocational schools, technical high schools, trade schools, technical

colleges and universities

Laboratory furnishing made of stainless steel

�������TESTING/L �������TESTING/L TESTING ������

������

�������������������������

������������������

������������������������

��

�������������������

��������������������������

��������������

1996 � 2 �������������� DIN����

� EN�� ISO 9001 ������������������

���������������������������

��

�������������������������

��������������

Trusting is good, but TESTING is better

For more than 20 years now, we at

TESTING have produced testing

equipment for construction material.

We have indeed achieved a high

level of success: both in Germany

and on international markets.

We offer a comprehensive line of

testing systems to satisfy all the

requirements and expectations of

our customers.

The Made in Germany that you see

on our equipment stands for the

superior quality of the products

manufactured at TESTING.

First-class quality, ongoing efforts

toward quality enhancement, excellent

service and friendliness to our

customers are the key aspects of

our corporate philosophy.

In addition, we have been certified

according to DIN EN ISO 9001 since

February of 1996.

We guarantee the quality of our products

on the basis of highly qualified

and motivated staff, high-performance

production technology, as

well as reliable sub-contractors.

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de 1.03


1.04

����

Friendly and proficient

�����������

We at TESTING consider our support

of you a highly personal matter.

����������������� You are indeed in good hands with

���������������� TESTING staff.

You can of course also direct your

��������

inquiries and orders to us by e-mail

or fax.

��� ������

Home Office

TESTING Bluhm & Feuerherdt GmbH

Geneststraße 5-6

D-10829 Berlin

Germany

Tel.: + 49 30 / 755 90 94

Fax: + 49 30 / 755 90 98

e-mail: info@testing.de

www.testing.de

Jochim Feuerherdt

���

General Manager

Inis Schneider

Jens Petraneck

�� �������

Sales

Production / After sales service

TESTING

Branch Office in Neuss

TESTING Bluhm & Feuerherdt GmbH

Vossenacker Str. 9

D-41464 Neuss

Germany

Tel.: + 49 21 31 / 74 05 60

Fax: + 49 21 31 / 74 05 62 9

Andreas Feige

Navin Beckmann

Frank Völzke

�� �� ��������

Sales

Sales

Sales Branch Office Neuss

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de


TESTING

��

��

���

��

��

��

��

��/��

����

��/��

����

������

����

�����

1

2

3

4

5

6

7

8

9

10

11

12

13

Contents

Cement

Concrete

Soil

Asphalt

Aggregates

Weighing

Drying/Heating

General Equipment

Temperature/Moisture

Construction Repair

Laboratory Furniture

Surveying Equipment

Index

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de 1.05


1.06

TESTING

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de


TESTING

TESTING

1Cement

1

1.07


1.08

��

Cement

TESTING

STAR

�����

�����������

Electrical power sampler with spiral

conveyer on request

���

Order no.

1.0212

1.0207

1.0208

Sampling device for bulk cement

40 mm diam., length 1500 mm

ASTM C 183, EN 196

���� ���� EN196

Sampling device for packed cement

25 mm diam., length 850 m

EN 196

Equipment for determination of bulk density

of cement, consisting of: sieve funnel, tripod,

������� �������

measuring vessel 1l, ��������

��������

spatula, straight edge

ASTM C 183, EN 196

1.0209

1.0209.01

1.0209.02

1.0209.03

1.0209.04

1.0209.05

1.0209.06

1.0209.07

204

Blaine air permeability apparatus, compl.

EN 196, DIN 1164, BS 4550, ASTM C 204

����

Official calibration

1 �������

Standard sand 1 (coarse)

2 �������

Standard sand 2 (fine)

��

Spare parts

�� �� 12.5mm�1000 �

Filter paper 12.5 mm diam, 1000 ea.

���� 50ml

Fill oil, 50 ml

�� U ��

U-shaped tube made of glass

������

Aspirator with rubber tube

TESTING

�������

�� 40mm��� 1500mm

�������� ASTM C 183����� ����

EN196

�������

�� 25mm��� 850mm

���������

������������1 ��������

��

�������� ASTM C 183����� ���� EN

196

��������������

����

���� EN 196������� DIN 1164

���� BS 4550��������� ASTM C

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

������� ������� ��������

��������

���

Order no.

1.0290

1.0290.01

1.0209.02

1.0209.03

1.0209.04

1.0209.05

1.0290.02

1.0210

1.0210.01

1.0210.02

1.0210.03

1.0210.04

1.0210.05

Cement 1

��

������������

���230 V/50 Hz

����

���� EN 196������� DIN 1164��

��� BS 4550��������� ASTM C

204

Electronic Blaine air permeability apparatus

Complete, 230 V / 50 Hz

EN 196, DIN 1164, BS 4550, ASTM C 204

����

Official calibration

1 �������

Standard sand 1 (coarse)

2 �������

Standard sand 2 (fine)

��

Spare parts

�� �� 12.5mm�1000 �

Filter paper 12.5 mm diam, 1000 ea.

����� 50ml

Fill oil, 50 ml

�� U ��

U-shaped tube made of glass

��������

Dyckerhoff ������

230 V/50 Hz

Electronic air permeability tester

Dyckerhoff system

230 V / 50 Hz

�����������

Capillary tube with test certificate

��

Spare parts

����100 �

Dust filters, 100 ea.

�� �� 40.5mm�500 �

Filter paper 40.5 mm diam, 500 ea.

����� 150ml

Fill oil, 150 ml

�� U ��

U-shaped tube made of glass

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.09


1.10

��

Cement

1.0291

1.0292

1.0291.01

1.0291.02

1.0291.03

1.0291.04

TESTING

��� ��������

Order no. Dyckerhoff ������

����������������������

�����

���������������������

���������������������

���

�������������������� ��������

230 V / 50 Hz���

������� ��������

��������������1 �����500

�������� 41mm��100 �������

13mm��1 ���

Automatic Blaine analyzer,

Dyckerhoff system

An automatic, microprocessor-controlled analyzer

for measurement of the specifi c surface

(Blaine value) of powders.

This device operates with 1 or 2 measuring cells.

After entry of test-specific sample data into the

controller, the test is completely automatically

carried out and evaluated. The device has an

interface for a generally commercially available

printer.

230 V / 50 Hz, 1 ph

Scope of equipment delivered: automatic air

permeability tester, 1 bottle of fill oil,

500 ea. round filters (diam. 41 mm),

100 ea. dust filters (diam. 13 mm),

��������

1 ea. tamper

Device �������� with one measuring cell

��

Device with two measuring cells

1

Accessories

�������

���� 2800cm 2 /g

������� 600g

Calibration sand 1 (coarse)

Specifi c surface approx. 2800 cm2/g

Officially tested, approx. 600 g

2 �������

���� 4000cm 2 /g

������� 600g

Calibration sand 2 (fine)

Specific surface approx. 4000 cm2/g

���������������������

Offi cially tested, approx. 600 g

��

Precision dial gauge for measurement the filling

�������������������

level of the measuring cell (optional)

����

EN

196�����

Rotational lock for preventing the piston of the

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


TESTING

��������� Subject to technical modification without notice.

������� ��������

Cement 1

��

��� ������250 ����

Order no.

1.0211

0-1 ��� 18-24 ������

�������� ASTM C 188����� BS

4550

8.0139

1.0237

1.0237.01

1.0235

1.0235.01

1.0235.02

Le Chatelier flask cap. 250 ml

Graduated neck from 0 �-

1 ml and from 18 - 24 ml

ASTM C 188 / BS 4550

���������

����50 �����

Pycnometer with capillary rent stopper

Adjusted, cap. 50 ml, Duran

�����

�����������

������ DIN 1060����� ����

EN 459

Influx apparatus acc. to Böhme

For determining spec. flow density of lime

DIN 1060, EN 459

����

Filling collar

230 V / 50 Hz

Heat-of-hydration apparatus

Complete, for determination of the heat of hydration

230 V / 50 Hz

��

Spare parts

4550

Beckmann-type thermometer

ASTM C 186, BS 4550

������ 650 ��

Dewar flask, cap. 650 ml

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de



��


�������

����������������

������

�������� ASTM C 186����� BS

1.11


1.12

��

Cement

TESTING

STAR

���

Order no.

1.0301

1.0301.05

1.0301.11

1.0301.01

1.0301.16

1.0301.17

1.0302

1.0301.05

1.0302.01

1.0301.11

1.0302.02

1.0301.16

1.0301.17

TESTING

��������������� DIN 1164

���������������������

���

Vicat set needle unit, DIN 1164

Complete with needle, consistency plunger,

conical mould, glass base plate and thermometer

��

Spare parts

������� 1.13 ��

Initial-set needle, 1.13 mm diam.

������ 10 ��

Consistency plunger, 10 mm diam.

������� 65/75 ��

Conical hard rubber ring, 65/75 mm diam.

����110������ ��

Glass base plate, 110 x 110 x 3 mm

���

Thermometer

������������� ����

EN 196

����������������������

�������

Vicat set needle unit, EN 196

Complete with initial and final-set needle,

consistency plunger, conical mould,

glass base plate and thermometer

��

Spare parts

������� 1.13 ��

Initial-set needle, 1.13 mm diam.

������� 1.13 ���������

Final-set needle, 1.13 mm diam.

with special footing

������ 10 ��

Consistency plunger, 10 mm diam.

������� 70/80 ��

Conical hard rubber ring, 70/80 mm diam.

����110������ ��

Glass base plate, 110 x 110 x 3 mm

���

Thermometer

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


TESTING

��������� Subject to technical modification without notice.

Cement 1

��

��� ����������������� ASTM C

Order no.

1.0303

187-191

���������������������

���

1.0303.01

1.0301.11

1.0303.02

1.0301.16

1.0301.17

1.0304

1.0301.05

1.0302.01

1.0301.11

1.0304.01

1.0301.16

1.0301.17

Vicat set needle unit, ASTM C 187-191

Complete with needle, consistency plunger,

conical mould, glass base plate and thermometer

��

Spare parts

����� 1.0 ��

Initial-set needle, 1.0 mm diam.

������ 10 ��

Consistency plunger, 10 mm diam.

������� 60/70 ��

Conical hard rubber ring, 60/70 mm diam.

����110������ ��

Glass base plate, 110 x 110 x 3 mm

���

Thermometer

������������� BS 4550

����������������������

�������

Vicat set needle unit, BS 4550

Complete with initial and final-set needle,

consistency plunger, Vicat mould, glass base

plate and thermometer

��

Spare parts

������� 1.13 ��

Initial-set needle, 1.13 mm diam.

������� 1.13 ���������

Final-set needle, 1.13 mm diam.

with special footing

������ 10 ��

Consistency plunger, 10 mm diam.

���������� 90/80 ��

Vicat brass mould, 90/80 mm diam.

����110������ ��

Glass base plate, 110 x 110 x 3 mm

���

Thermometer

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.13


1.14

��

Cement

�������������� DIN 1168��������

��� ASTM ����� BS �������

Accessories for gypsum, DIN 1168 and acc.

to ASTM and BS on request

TESTING

��� ��� ����������������� DIN

Order no. 1168

1.0305

���

���

���

��� ��� ��� ���������������������

���

Vicat set needle unit for gypsum, DIN 1168

���

���

��� ��� ��� ���

��� ��� ���

���

Complete with conical plunger, conical hard

rubber ring, glass base plate and thermometer

��

Spare parts

1.0305.01 ��������� 10 ��

Conical plunger, 10 mm diam.

1.0301.01 ������� 65/75 ��

Conical hard rubber ring, 65/75 mm diam.

1.0301.16 ����110������ ��

Glass base plate, 110 x 110 x 3 mm

1.0301.17 ���

Thermometer

1.0306 ����������������� DIN

1164����� ���� EN 196���������

ASTM C 187

����������������������

���

Automatic Vicat set needle unit

DIN 1164, EN 196, ASTM C 187

Complete with initial and final-set needle, consistency

plunger, conical mould and glass base plate

��

Spare parts

1.0306.01 ������� 1.13 ��

Initial-set needle, 1.13 mm diam.

1.0306.02 ������� 1.13 ����������

��� ���� EN iEN

196 196

Final-set needle, 1.13 mm diam.

with special footing, EN 196

1.0306.04 ������ 10 ��

Consistency plunger, 10 mm diam.

1.0306.05 ����500 �

Extra sheets of plotting paper, 500 sheets

1.0306.06 ���

Extra recording pen

1.0301.01 ������� 65/75 ��������� DIN

1164

Conical hard rubber ring, 65/75 mm diam., DIN 1164

1.0302.02 ������� 70/80 ������� ����

EN 196

Conical hard rubber ring, 70/80 mm diam., EN 196

1.0306.07 ������ 120 ��

Glass base plate, 120 mm diam.

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


TESTING

��������� Subject to technical modification without notice.

1.0328.02 1.0328

1.0328 ( ��� /control unit)

1.0328.01(5x + ����� )

��� .

Order no.

1.0328

1.0328.01

1.0328.02

1.0328.03

1.0328.04

1.0328.05

1.0328.06

1.0328.07

1.0328.08

1.0328.09

Cement 1

��

�����������1 � 6 ������� ����

�EN EN 196-3 196-3

���������������� 5 ���

����

���������������������

�����������������

���������������������

�����

Automatic Vicat needle apparatus with 1 - 6

measuring points, EN 196-3

Consisting of a basic system with control unit

and up to 5 additional measuring points.

�������Each Vicat mould stands ��������

in a water bath with a

thermostat for regulation of the water temperature.

Each measuring point has a cleaning device

for the Vicat needle.

The control unit is equiped with a microprocessor

which enables fully automatic testing sequences.

�����������������230 V / 50

Hz�������� ����

EN 196-3

Basic device, complete, with electronic

control unit, 230 V / 50 Hz, 1 ph, EN 196-3

�����1 � 5 ��

����������

Additional measuring point (1 - 5 ea.)

For connection to the basic device

����������������+5°C �

+35°C������230 V / 50 Hz���

Thermostat for temperature control of the water

bath, +5°C to +35°C, including heating coil,

230 V / 50 Hz, 1 ph

����������

Additional heating coil per unit

��

Spare parts

���12 �������� 1.13 ��

1 set = 12 ea. Vicat needles, 1.13 mm diam.

���4 ������

1 set = 4 ea. felt-tip recorders

����100 �

100 sheets of plotting paper

���������� 70��� ����� ��

Vicat mould made of bronze, 70/80 mm dia. x 40

mm

����������

Water container for the Vicat mould

�������

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.15


1.16

��

Cement

TESTING

��� �����������6 �������� ����

Order no. EN 196-3

���������������������

���������������������

��������������

������300 �

������� ���������������������

��������

����������

1.0307

1.0307.01

1.0307.02

1.0307.03

1.0307.04

1.0307.05

1.0307.06

1.0307.07

1.0307.08

1.0307.09

1.0307.10

1.0307.11

1.0307.12

���������������������

�����

�������� Windows95 � 98�

����

��������������������

VGA ����� 17�

�� HP Deskjet 710 C ��������DINA4

���

����

��������������������

������

����������������

�������������600�775�900 �


�����������������

750�775�900 ��

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

������������

1 ������5 ���� 1.13 ��

���������� ����

EN 196

������ 100 ��

��������

��������� Subject to technical modification without notice.


Subject to technical modification without notice.

���������

TESTING

���

Order no.

1.0307

1.0307.01

1.0307.02

1.0307.03

1.0307.04

1.0307.05

1.0307.06

1.0307.07

1.0307.08

1.0307.09

1.0307.10

1.0307.11

1.0307.12

Cement 1

��

Computer controlled Vicat needle apparatus

with 6 measuring points, EN 196, p. 3

For determination of the setting time of cement.

The 6 measuring points are installed in a round

test tank.

Tests can be performed in air or under water.

Programmed test sequences.

Automatic registration of the beginning and of

the end of setting time as well as of curves.

Weight of probe: 300 g

After each penetration the Vicat needle is

automatically cleaned by a cleaning device

consisting of felt reels.

The delivery includes the Vicat needle apparatus,

the control unit and the standard software.

(suitable for WINDOWS 95 and 98)

Necessary accessories

PC-system for test execution including software

and operation manual in english

VGA colour monitor 17“

HP Deskjet 710 C colour ink jet printer,

formate DIN A 4

Optional accessories

Test area protection cover made of plastic

Thermostat for the precise controlling of the

temperature in the test tank

Laboratory worktable made of stainless steel,

w x d x h: 600 x 775 x 900 mm

PC-worktable made of stainless steel,

w x d x h: 750 x 775 x 900 mm

Spare parts

Spare felt reels for needle cleaning system

Set of Vicat needles (5 ea.) diam. 1.13 mm

Conical moulding ring (EN 196)

Glass plate diam. 100 mm

Specimen suport and centering device

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.17


1.18

��

Cement

TESTING

STAR

TESTING

STAR

���

Order no.

1.0223

1.0223.05

1.0223.01

1.0223.02

1.0223.03

1.0223.04

1.0224

���

1.0224.01

������

TESTING

������

����������

���������������������

����

������ DIN 1164���������� ����

�� DIN EN DIN 1015-3 EN 1015-3

Hägermann flow table

Manually operated with counter, table top of glass

complete with mould, feeding hopper and tamper

DIN 1164, DIN EN 1015-3

� 1.0223��������

Same as 1.0223 but without counter

��

Spare parts

�����

Conical mould

���

Feeding hopper

��

Tamper

����

Glass plate

������

�����230V/50Hz������

���������������������

����

������ DIN 1164���������� ����

�� DIN EN DIN 1015-3 EN 1015-3

Hägermann flow table

Electrically operated 230 V / 50 Hz, with counter,

table top of glass,

complete with mould, feeding hopper and tamper

DIN 1164, DIN EN 1015-3

������

�����230V/50Hz������

���������������������


���� ����

EN 413-2�EN 459-2

Hägermann flow table

Electrically operated 230 V / 50 Hz, with counter,

table top of stainless steel,

complete with mould, feeding hopper and tamper

EN 413-2, EN 459-2

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Order no.

1.0225

1.0225.01

1.0225.02

1.0226

1.0313

1.0223.01

1.0245

���

Flow table

Manually operated, complete

Table and mould made of bronze

ASTM C 230, BS 4551

��

Spare parts

�������

Conical mould made of bronze

����

Hardwood tamper

Cement 1

��

������

�������

�����������

�������� ASTM C 230����� BS

4551

������

�����230V/50Hz���

�����������

�������� ASTM C 230����� BS

4551

Flow table

Electrically operated 230 V / 50 Hz, complete

Table and mould made of bronze

ASTM C 230, BS 4551

������

������310�310�5 ��

Flow control disk for floating screed

Made of plexiglass, 310 x 310 x 5 mm

��

Accessories

�����

Conical mould

������

������100�100�200 ��

������ DIN 18555

Mortar compactibility container

w x d x h: 100 x 100 x 200 mm

DIN 18555

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.19


1.20

��

Cement

TESTING

��� ������

Order no.

1.0231

����������������

�������� ASTM C 91�C 141�C 266�

���� BS 4551-1

1.0236

1.0311

1.0311.01

1.0311.02

1.0311.03

1.0311.04

1.0312

Gillmore apparatus

To determine the setting time of cement, compl.

ASTM C 91, C 141, C 266, BS 4551-1

���������

����������

������ DIN 4211����� EN 413�EN

459�EN 1015-4

Consistometer for plasters

Complete, with mould and tamper

DIN 4211, EN 413, EN 459, EN 1015-4

��������

��������������

���� BS 4551-1�6463-4

Dropping ball apparatus

For measuring the consistence of fresh mortar, compl.

BS 4551-1, 6463-4

��

Accessories

�������

�������������� 0.1 ��

Ball penetration measuring apparatus

with precision sial gauge, graduated in 0.1 mm

��

Spare parts

��

Dropping ball

����

Brass mould

�����

Aspirator

����������

���������������������

���������������

230V/50Hz���

����

���� EN 413-2������� NF P18-452

Mortar workability apparatus

By vibration the mortar flows from the large

chamber into the small one. The time is a

function of the workability of the mortar.

230 V / 50 Hz, 1 ph

EN 413-2, NF P18-452

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

TESTING

STAR

TESTING

STAR

���

Order no.

1.0214

1.0214.01

1.0214.02

1.0215

1.0216

1.0213

1.0213.01

1.0301.16

�������

���� ���� EN 196

Le Chatelier-mould

EN 196

��

Accessories

���� 100 �

Weight ca. 100 g

����10 �

Glass plates, 10 ea.

��������

���� ���� EN 196

Testing device for Le Chatelier-moulds

EN 196

�����������

230V/50Hz

Cement 1

��

����

���� EN 196

Water bath with insert for Le Chatelier-moulds

230 V / 50 Hz

EN 196

V2A ���

������������

������ DIN 1164

Pot of stainless steel

With lid for measuring of the volume consistency

of cement

DIN 1164

������

Insert for glass plates

����110×110×3 ���10 �

Glass plates, 110 x 110 x 3 mm, 10 ea.

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.21


1.22

��

Cement

TESTING

STAR

TESTING

��� ��� ������

Order no. ��������������

1.0324

�� 100 ����� 5 ����� 5 ��

��� 5°����� 120�120 ��

���� ���� EN 459-2����� BS 1191�BS

6463-4

1.0230

1.0230.01

1.0230.02

���

���

1.0230.03

1.0230.04

Brass ring mould for Pat Test

For determination of the soundness of hydrated

lime and gypsum building plasters.

Diam. 100 mm, hight 5 mm, width 5 mm,

inside taper of 5°, with base plate 120 x 120 mm

EN 459-2, BS 1191, BS 6463-4

�������������

�� 8 ������ 25 �

���� TÜV������������

�������� ASTM C 151

High-pressure autoklav

Cap. 8 l, pressure 2.5 N/mm2,

inclusive security-test-certifi cate for

pressure chamber

ASTM C 151

��

Accessories

������� 8 � 1�×1�×11

Sample frame for 8 prisms

1“ x 1“ x 111/4“

1 /4���

������� 6 � 40×40×160 ����

Sample frame for 6 prisms

40 x 40 x 160 mm

���

���� 1�×1�×11 1 /4�

�������� ASTM C 490

Two-gang prisms mould

To produce specimens 1“ x 1“ x 111/4“

ASTM C 490

1�×1�×11

Inserts for specimens 1“ x 1“ x 111/4“

Pack of 10 pcs

1 /4�������10 ���

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING



�������� 1.24 �

Inserts see page 1.24

�������� 1.24 �

Inserts see page 1.24

TESTING

STAR

���

Order no.

1.0228.04

���

1.0228.07

1.0228.08

1.0228.09

���

1.0228

1.0228.10

1.0228.01

Cement 1

��

B �������

����������

25�25�250 ���70�70�280 ���

40�40�160 ���80�80�240 ���

50�50�250 ��

������������� 5 ��

��� 0.001 ��

������ DIN 52450���������

ASTM C490����� BS 1881�������

NF P 15-401

Shrinkage measuring device, type B

For specimens:

25 x 25 x 250 mm 70 x 70 x 280 mm

40 x 40 x 160 mm 80 x 80 x 240 mm


50 x 50 x 250 mm

Precision dial gauge, 5 mm travel,

0.001 mm graduations

DIN 52450, ASTM C 490, BS 1881, NF P 15-401

��

��

� 1.0228.04������������ ��


RS 232

��

��� 25 ��

����� 0.001 ��

Same as 1.0228.04, but with digital gauge and

RS 232 connector to PC, stroke 25 mm

sens. 0.001 mm

��

Accessories

25�25�250 ��������

�������� ASTM C490

Reference bar for specimens 25 x 25 x 250 mm

ASTM C 490

40�40�160 ��������

������ DIN 52450

Reference bar for specimens 40 x 40 x 160 mm

DIN 52450

C �������

�������� 40�40�160 ���

������������� 5 ��

��� 0.001 ��

������ DIN 52450

Shrinkage measuring device, type C

For specimens 40 x 40 x 160 mm, precision

dial gauge, 5 mm travel, 0.001 mm graduations

DIN 52450

� 1.0228����������� RS 232 ���

��� 25 ��

����� 0.001 ��

Same as 1.0228, but with digital gauge and RS 232

connector to PC, stroke 25 mm, sens. 0.001mm

��

Accessories

C �����

Control briquette specimen C

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.23


1.24

��

Cement

��

��

AB C AB C

1 1 2 2

���

Order no.

1.0228.05

1.0228.02

1.0228.06

���

1.0228.03

1.0229

1.0314

1.0314.01

������������

TESTING

������ DIN 52450

Inserts for determining shrinkage and moisture

movements, DIN 52450

1 ������� AB ���10 �

Steel inserts, type 1, form AB, 10 ea.

1 ������� C ���10 �

Steel inserts, type 1, form C, 10 ea.

2 ������� AB ��������10 �

Steel inserts, type 2, form AB,

to paste upon specimens, 10 ea.

2 ������� C ��������10 �

Steel inserts, type 2, form C,

to paste upon specimens, 10 ea.

��������

��������� 100 ��

����������� 12 ��

��� 0.002 ��

���� BS 1191

Plaster extensometer for gypsum

Complete with trough-shaped 100-mm base plate,

dial gauge, 12 mm travel, 0.002 mm graduations

BS 1191

���������������

���� 451-2��������� ASTM C 430

����� 451-2 ���������� 17.5

��� 17 ���������� 160 ����

���� 5 ����������������

�������

Fineness of fly ash determination by wet

sieving with the spray nozzle apparatus

EN 451-2, ASTM C 430

Consisting of spray nozzle 17,5 mm ID with

17 holes as specified in EN 451-2, a vacuum

pressure gauge, 160 kPa graduated at 5 kPa

divisions and fittings to attach the apparatus to

a standard domestic water supply.

Please, order special sieve separately.

������ 50 ��

Edelstahl Siebgewebe 0,045 mm

�������0.045 ��

Stainless steel mesh 0.045 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

1.0315

���

Order no.

1.0204

1.0204.01

1.0204.02

1.0315

1.0316

1.0315.01

1.0315.02

�����

������� 5 �

������

2 ������140/285 �/��

CE ����

230 V / 50 Hz

������ DIN 1164

Mortar mixer

With manual control, cap 5 l,

normal duty design

2 mixing speeds: 140/285 rpm

With CE-safety guard

230 V / 50 Hz

DIN 1164

��

Spare parts

������

Stainless steel stirrer

������

Stainless steel bowl

�����

������� 5 �

�����

2 ������140/285 �/��

CE ����

400 V / 50 Hz�3 �

����

���� EN 196������� DIN 1164

Mortar mixer

With manual control, cap 5 l,

normal duty design,

2 mixing speeds: 140/285 rpm

With CE-safety guard

400 V / 50 Hz, 3 ph

EN 196, DIN 1164

� 1.0315����� CE ����

Cement 1

��

Same as 1.0315, but without CE-safety guard

��

Spare parts

������

Stainless steel stirrer

������

Stainless steel bowl

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.25


1.26

��

Cement

TESTING

STAR

���

Order no.

1.0203

1.0203.02

1.0203.03

1.0203.01

1.0205

1.0206.03

TESTING

TESTING �����

������� 5 �

������

������

2 ������140/285 �/��

�� CE �������

400 V / 50 Hz�0.37 ��

���� ���� EN 196������� DIN 1164��

������� ASTM C 305�C 277����

� BS 3892

Mortar mixer TESTING

With manual control, cap 5 l,

heavy duty design,

2 mixing speeds 140/285 rpm

Safety devices, CE-certifi ed

400 V / 50 Hz, 0.37 kW

EN 196, DIN 1164, ASTM C 305, C 277, BS 3892

����� TESTING ������

Spare parts for all TESTING mixers

������

Stainless steel stirrer

������

Stainless steel bowl

TESTING �����

� 1.0203���������

Mortar mixer TESTING

Same mixer as 1.0203 but with sand dispenser

TESTING �����

� 1.0203���������������

��������������

���������

����

���� EN 196 T. 1+3������� DIN

1164 T. 5+7������ B 3310

Mortar mixer TESTING

Same mixer as 1.0203 but with automatic

programm control and sand feeder.

It is possible to select the manual working, or

the automatic programm.

Programms presently stored in the mixer:

EN 196 p. 1+3, DIN 1164 p. 5+7,

Austrian standard B 3310

�������

Other programms on request

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Order no.

1.0206

1.0206.02

1.0206.03

1.0206.01

Cement 1

��

TESTING �����

� 1.0203�����������������

����

��������������

���������

���� ���� EN 196 T. 1+3������� DIN

1164 T. 5+7������ B 3310

Mortar mixer TESTING

Same mixer as 1.0203 but with automatic

programm control, sand feeder and

water dosing system.

It is possible to select the manual working, or

the automatic programm.

Programms presently stored in the mixer:

EN 196 p. 1+3, DIN 1164 p. 5+7,

Austrian standard B 3310

������������

���������

������1000�850�750 ��

Base: Two-door stainless steel cabinet

Designed to accomodate water pumping unit

and water tank.

w x h x d: 1000 x 850 x 750 mm

�������

Other programms on request

TESTING �����

� 1.0203�����������������

�������

��������������

���������

����

���� EN 196 T. 1+3������� DIN

1164 T. 5+7������ B 3310

�������������

��������

������1000�850�750 ��

Mortar mixer TESTING

Same mixer as 1.0203 but with automatic

programm control, sand feeder, water dosing

system and dust exhaust system.

It is possible to select the manual working, or

the automatic programm.

Programms presently stored in the mixer:

EN 196 p. 1+3, DIN 1164 p. 5+7,

Austrian standard B 3310

Inclusive base: Two-door stainless steel cabinet

Designed to accomodate water pumping unit,

water tank and dust exhaust system.

w x h x d: 1000 x 850 x 750 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.27


1.28

��

Cement

���

Order no.

1.0203.04

TESTING

Exhaust and filtersystem

With suction connection and vacuum arm.

Air rating: 800 m3/h

Subatmosheric pressure: 2000 Pa

Special noise control system.

Filter cartridge with 8 m2 filter surface area,

cleaning is carried out with the filter block closed.

w x h x d: 500 x 770 x 730 mm

230 / 400 V AC, 0.75 kW

1.0217 CEN ���

�������TESTING/L ������

36 ���� 1350 �

1.0218

1.0202.01

1.0218.02

������

��������������������

���800m 3 /������2000 �

��������

8m 2 ���������������

������500�770�730 ��

230/400 V�0.75 �����

������ DIN����� ����

EN 196 T.1

CEN-Standard sand

36 portions ea. 1350 g

DIN EN 196 part 1

���

40�40�160 ��

�����������

������ DIN 1164���������

ASTM C 348����� BS 4551

Three-gang mould for mortar prisms

40 x 40 x 160 mm

Normal duty design, surface galvanized

DIN 1164, ASTM C 348, BS 4551

������

Feeding hopper for three-gang mould

��� 150�20 ��

Hand tamper 150 x 20 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

TESTING

STAR

���

Order no.

1.0202

1.0202.06

1.0202B

1.0202.06B

1.0202.01

1.0202.02

1.0202.03

1.0202.04

1.0202.05

1.0221.03

1.0221.01

1.0221.02

1.0221.03

�����

40.1�40�160 ��

Cement 1

��

�������������

���� ���� EN 196

Precision three-gang mould

40.1 x 40 x 160 mm

Grinded surfaces, marked webs and nutplates

EN 196

�����

� 1.0202������

Precision three-gang mould

Same as 1.0202 but finish electroless nickel

�����

� 1.0202���������

Precision three-gang mould

Same as 1.0202 but with boreholes for steel inserts

�����

� 1.0202���������������

Precision three-gang mould

Same as 1.0202 but with boreholes for steel inserts

and finish electroless nickel

��������

Feeding hopper for precision three-gang mould

����

Brass distribution template

������� 300 ��

Brass straightedge, length 300 mm

���� 210×185×6 ��

Glass cover plate, 210 x 185 x 6 mm

������

Application frame for prisms for measuring shrinkage

������

/ Test certificate

�������

40.1�40�160 ������� ����

EN 196

���������������� 9.5 ��

���������

Precision three-gang mould

40.1 x 40 x 160 mm, EN 196

Surfaces finish electroless nickel

Marked webs and nutplates, weight approx. 9.5 kg

(Other weights on request)

���

������

/ Feeding hopper

/ Test certificate

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.29


1.30

��

Cement

���

Order no.

1.0219.01

1.0219

1.0318

1.0319

1.0320

1.0219A

���

1.0219.10

���������

40�40�160 ��

TESTING

���50 �

Three-gang mould of polystyrene without lid

40 x 40 x 160 mm

Pack: 50 ea.

���������

40�40�160 ��

���50 �

Three-gang mould of polystyrene with lid

40 x 40 x 160 mm

Pack: 50 ea.

�����

10�40�160 �������

������������

Precision six-gang mould

10 x 40 x 160 mm, grinded surface

Marked webs and nutplates with boreholes for

steel inserts

� 1.0318�����

Same as 1.0318 but without boreholes

�����

20�20�160 �������

������������

Precision six-gang mould

20 x 20 x 160 mm, grinded surface

Marked webs and nutplates with boreholes for

steel inserts

�����8�����

�������� ASTM C 190�C 307

Briquette mould, with base plate

ASTM C 190, C 307

�8�����������

��������

�������� ASTM C 190�C 307

Three unit briquett mould

Made of brass with base plate

ASTM C 190, C 307

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Order no.

2.0213

1.0322

1.0401

1.0402

1.0323.01

1.0323.02

1.0324.01

�����

70.7 ������

���� BS 4550

Cube mould

70.7 mm with base plate

BS 4550

T 106

Three-gang mould for cubes

For 3 mortar cubes 50 mm

ASTM C 109, AASHTO T 106

Cement 1

��

������

3 � 50 ������

�������� ASTM C109��� AASHTO

�����

200�200�200 ��������������

� 2 ��� 100�100�200 ��

������ DIN 18555-4

Cube mould

200 x 200 x 200 mm with two inserts for

production of 2 specimens 100 x 100 x 200 mm

DIN 18555-4

�����

200�200�200 ��������������

�� 4 ��� 95�95�200 ��

������10 ��

������ DIN 18555-4

Cube mould

200 x 200 x 200 mm with cross-shaped insert for

production of 4 specimens 95 x 95 x 200 mm

Plate width: 10 mm

DIN 18555-4

��

Accessories

����

Special tamper

��

Spare parts

2 � 100×100×200 �����

2 ea. inserts 100 x 100 x 200 mm

������

1 cross shaped insert

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.31


1.32

��

Cement

TESTING

STAR

TESTING

STAR

���

Order no.

1.0220

1.0220.01

1.0221

1.0221.01

1.0221.02

1.0222

������

��������

�� 0.4-1.0 ��

���

230 V / 50 Hz

���� EN 196

TESTING

Vibrating table for three-gang moulds

With seperate switch box

Vibration range 0.4 - 1.0 mm

Timer

230 V / 50 Hz

EN 196

������

��������������������

�� 0.4-1.0 ��

���

230 V / 50 Hz

���� ���� EN 196

Vibrating table for three-gang moulds

Smooth styling in stainless steel, but very study,

built in switch box

Vibration range 0.4 - 1.0 mm

Timer

230 V / 50 Hz

EN 196

���������

����������60 �/��

230 V / 50 Hz

���� ���� EN 196-1�413-2�459-2�����

BS 3892�ISO 679

Jolting table with counter

With electronically controllable number of strokes

for exactly 60 strokes per minute

230 V / 50 Hz

EN 196-1, 413-2, 459-2, BS 3892, ISO 679

����40.1�40�160 ������� ����

EN 196

Three-gang mould 40.1 x 40 x 160 mm, EN 196

���

Feeding hopper

��������

70.7 �����230 V / 50 Hz����� BS 4550

Vibrating table for cube mould

70.7 mm edge length, 230 V / 50 Hz

BS 4550

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


���������

1.0321.02

Subject to technical modification without notice. TESTING

1.0321.04

���

Order no.

1.0321

1.0321.01

1.0321.02

1.0321.03

1.0321.04

1.0321.05

��

Cement 1

����������������� ����

EN 196

�����+20°C ��1°C

�����95�����

���������������

Humidity curing of mortar specimens in threegang

moulds EN 196

inside temperature range: +20°C, ±1°C

Relative humidity: 95%, ± 3%

Elektronic adjustable control

Material: Stainless steel

24 �������

6 ������

������1400�750�1600 ��

Humidity cabinet for 24 three-gang moulds

with 6 telescopic cabinet racks

w x d x h = 1400 x 750 x 1600 mm

32 �������

8 ������

������1400�750�1700 ��

Humidity cabinet for 32 three-gang moulds

with 8 telescopic cabinet racks

w x d x h = 1400 x 750 x 1700 mm

48 �������

12 ������

������1400�750�1900 ��

Humidity cabinet for 48 three-gang moulds

with 12 telescopic cabinet racks

w x d x h = 1400 x 750 x 1900 mm

12 �����������

������������

1 ������������

1 ����� 3 ������

������1600�800�900 ��

Humidity workbench for 12 three-gang moulds

Stainless steel chassis with a sturdy worktable

1 lower cabinet for the humidity/temperature aggregat

1 lower cabinet with three telescopic racks

w x d x h = 1600 x 800 x 900 mm

24 �����������

2 ������ 3 ������

������2220�800�900 ��

Humidity workbench for 24 three-gang moulds

2 lower cabinets with 3 telescopic racks each

w x d x h = 2220 x 800 x 900 mm

36 �����������

3 ������ 3 ������

������2650�800�900 ��

Humidity workbench for 36 three-gang moulds

3 lower cabinets with 3 telescopic racks each

w x d x h = 2650 x 800 x 900 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.33


1.34

��

Cement

��������

Stainless steel on request

���

Order no.

1.0327

1.0323

1.0227

1.0227.01

TESTING

��������

���� ���� EN 196��������� ASTM

C 87�C 109

������

�����������

�����+20°C �+70°C��1°C

�����95������

���������620�440�400 ��

���������900�700�800 ��

���60 ��

Humidity cabinet

EN 196, ASTM C 87, C 109

Material: stainless steel

Inner inspection glass door.

Inside temperature: +20 to +70°C, ±1°C

Humidity: 95 %, ±3°C RH

Inside dimensions w x h x d: 620 x 440 x 400 mm

Overall dimensions w x h x d: 900 x 700 x 800 mm

Weight: 60 kg

�������������

����

���� EN 196��������� ASTM C

87�C 109

�������������

�������������

������+30°C

�����95������

���������1090�470�1200 ��

���������1370�540�1490 ��

���100 ��

230 V / 50 Hz����2000 �

Large capacity humidity cabinet for curing

large quantities of mortar specimens in

three-gang moulds

EN 196, ASTM C 87, C 109

Aluminium and plexiglass made with shelves.

Complete with water circulation pump and

precision digital thermoregulator.

Inside temperature: up to 30°C

Humidity: 95 %, ±3 %

Inside dimemsions w x h x d: 1090 x 470 x 1200 mm

Overall dimensions w x h x d: 1370 x 540 x 1490 mm

Weight: 100 kg

230 V / 50 Hz, 1 ph, 2000 W

����

������360�260�110 ��

���������

Wet-storage box

Plastic, 360 x 260 x 110 mm with supporting

grating for cement prisms

����

������600�400�200 ��

���������

Wet-storage box

Plastic, 600 x 400 x 200 mm with supporting

grating for cement prisms

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Order no.

1.0325

1.0329

1.0326

Cement 1

��

������

����

���� EN 196-1�196-8���������

ASTM C 109�C 511

���������������������

�-0.4°C �+20°C �����

��������������

�����������������

���40 �����60 � 40.1�40�160 ��

���

���������510�350�230 ��

���������680�420�420 ��

230 V / 50 Hz����2000 �

Waterbath for mortar specimens

EN 196-1, 196-8, ASTM C109, C511

Double walled stainless steel made with wool

insulation the bath ensures a constant and uniform

temperature at -0,4 bis +20°C.

Equipped with digital thermostat and electric stirrer.

A cooling coil device, connected to the water

net, ensures the water cooling when necessary.

Capacity of the bath:

40 l and over 60 samples 40,1 x 40 x 160 mm

w x d x h inside: 510 x 350 x 230 mm

w x d x h outside: 680 x 420 x 420 mm

230 V / 50 Hz, 1 ph, 2000 W

� 1.0325����������

�����+10 �+99°C��0.4�°

As 1.0235, but with electrical cooling device

Temperature range: +10 bis +99°C, ±0,4°C

������

�������������

����

����������1500�300�650 ��

���������1600�1500�650 ��

Water bath for standing mortar specimens

Consisting of stainless steel frame with

2 plastic tanks.

Thermoregulator

Tank dimension w x h x d: 1500 x 300 x 650 mm

Overall dimension w x h x d: 1600 x 1500 x 650 mm

�����������

Other water baths, also stainless steel made, on request

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.35


1.36

��

Cement

TESTING

STAR

TESTING

STAR

���

Order no.

1.0335

1.0336

1.0335.01

1.0335.02

1.7304

1.7304.01

1.7304.02

1.0337

1.0335.01

1.0335.02

TESTING

TESTING �������1 �

�������������

������ DIN18555 T.2��������� ����

��� DIN EN DIN 459 EN T.2���������

459 T.2���������

ASTM C 185

Air entrainment meter TESTING, cap. 1 l

For determination of void ratio in freshly

mixed mortar, hand operated pump

DIN 18555 p.2, DIN EN 459 p.2, ASTM C 185

TESTING �������1 �

������������������

������ DIN18555 T.2��������� ����

��� DIN EN DIN 459 EN T.2���������

459 T.2���������

ASTM C 185

Air entrainment meter TESTING, cap. 1 l

For determination of void ratio in freshly

mixed mortar, with electric minicompressor

DIN 18555 p.2, DIN EN 459 p.2, ASTM C 185

������

Filling hopper for air entrainment meter

����

Transport box

7304 ��������1 �

�������������

������ DIN18555 T.2��������� ����

DIN ��� EN DIN 459 T.2���������

EN 459 T.2���������

ASTM C 185

Air entrainment meter type 7304, cap. 1 l

For determination of void ratio in freshly

mixed mortar, hand operated pump

DIN 18555 p.2, DIN EN 459 p.2, ASTM C 185

������

Filling hopper for air entrainment meter

����

Transport box

TESTING �������0.75 �

���������������������

����

����

���� EN 196�EN 413 T.2

Air entrainment meter TESTING, cap. 0,75 l

For determination of void ratio in freshly

mixed mortar and for cement of masonry,

hand operated pump

EN 196, EN 413 p.2

������

Filling hopper for air entrainment meter

����

Transport box

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

��� ��� ��������

Order no.

1.0239

��� ���

���

����� 40�40 � 40�62.5 �����

���� ���� EN196������� DIN 1164

Compression device

��� Complete with 40 x 40 mm or 40 x 62.5 mm

pressure plates

��� EN 196, DIN 1164

��� ��� ���

��

Spare parts

��� 1.0239.01

1.0239.02

1.0240

10.0331

10.0332

10.0333

10.0334

10.0337

10.0338

10.0339

10.0310

10.0331.03

10.0331.05

40�62.5 �����

������ DIN 1164

Pressure plates 40 x 62.5 mm

DIN 1164

40�40 �����

���� ���� EN 196

Pressure plates 40 x 40 mm

EN 196

���������

������ DIN 1164����� ���� EN 196

Bending device

DIN 1164, EN 196

���

�������������

��������������

Cement 1

��

����

Pull-off tester

For measuring the adhesive strength of facing

plasters, mortars, cements etc. on its supports.

Indication of force by gauge or digital display,

hand operated

5kN – ��

16kN – ��

25kN – ��

50kN – ��

5kN – – ���� ����

16kN – ����

25kN – ����

50kN – ����

��

Accessories

/ gauge

/ gauge

/ gauge

/ gauge

/ digital display

/ digital display

/ digital display

/ digital display

�������� 50 ���10 �

Aluminium pulling plates, 50 mm diam., 10 ea.

����������

Two-component bonding agent for concrete

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.37


1.38

��

Cement

TESTING

��� ��� ����������

Order no. �� 40�40��60 ������8�����

1.0252

�������� ASTM C 190�C 348���

���� DIN 1164����� ����

EN 196-1�NF P

15-451�ISO�������� UNE 80101

���������������������

���

��������������/������

��

�������

0-5000 ��������� 45 ��/�

0-150 �������� 9 ��/�

230 V/ 50 Hz�����������

��� �������1060�740�550 ��

���

��� ���55 ��

��� ���

1.0253

1.0252.01

1.0252.02

1.0252.03

Automatic flexure/tension machine

For flexure tests on mortar prisms 40 x 40 x 160 mm

and for tension tests on cement briquettes.

ASTM C 190, C 348, DIN 1164, EN 196-1,

NF P15-451, ISO, UNE 80101

Production of force by beam loading system with

a travelling weight, synchronous motor operated

providing a constant increase in load throughout

the test.

Direct reading of max. force in N and strength

in N/cm2

Two measuring ranges:

0 - 5000 N with constant increase in load of 45 N/sec

0 - 150 N with constant increase in load of 9 N/sec

230 V / 50 Hz, 1 ph, other voltages possible

w x h x d: 1060 x 740 x 550 mm

Weight: 55 kg

� 1.0252����� 10000 �������

As 1.0252, but with capacity 10000 N

Accessories

������ 100 ��

Flexure testing attachement, NF, DIN, EN, UNI

Distance between the lower bearers 100 mm

����������ASTM ��

Flexure testing attachement ASTM

�����8�����

Tensile testing attachement ASTM

For tests on cement briquettes

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

����������NF�DIN�EN�UNI �


�������ASTM ��

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Order no.

1.0241

1.0241.01

1.0241.02

1.0242

�������TESTING/L ������

1.0242.01

1.0241.01

1.0241.02

Cement 1

��

��/��������

2 ��������������

�����40-200 kN

�����2-10 kN

���������

���� ���� EN 196-1������� 196-1������� DIN 1164� 1164�

���� BS 3892

Combined compression/flexion testing machine

Class 2, manual control, with pressure gauge

reading,

Pressure range: 40 - 200 kN

Flexion range: 2 - 10 kN

Other measuring ranges are available

EN 196-1, DIN 1164, BS 3892

������

Load pacer

��� 40�40 ���� 40�62.5 ������

���������������������

��

Pressure piston 40 x 40 mm or 40 x 62.5 mm,

for installation in the flexion tester, for compression

testing of soft mortar samples

��/��������

2 ��������������

�����20-100 kN

40-200 kN

�����1-5 kN

2-10 kN

���������

���� ���� EN 196-1������� 196 1 ������ DIN 1164 1164�

���� BS 3892

Combined compression/flexion testing machine

Class 2, manual control, with pressure gauge

reading

Pressure range: 20 - 100 kN

40 - 200 kN

Flexion range: 1 - 5 kN

2 - 10 kN

Other measuring ranges are available

EN 196-1, DIN 1164, BS 3892

��������

Shutoff valve for the smaller measuring range

������

Load pacer

��� 40�40 ���� 40�62.5 ������

���������������������

��

Pressure piston 40 x 40 mm or 40 x 62.5 mm,

for installation in the flexion tester, for compression

testing of soft mortar samples

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.39


1.40

��

Cement

TESTING

STAR

TESTING

��� ��� ��/��������

Order no.

2 �����������

1.0243

����������

�����10-100 kN

20-200 kN

�����0.5-5 kN

1-10 kN

���������

���� ���� EN 196-1������� DIN 1164�

���� 3892 BS 3892

���

1.0244

Combined compression/flexion testing machine

Class 2, manual control, with digital display,

electronic pacemaker and data storage of peak

values

Pressure range: 10 - 100 kN

20 - 200 kN

Flexion range: 0,5 - 5 kN

1 - 10 kN

Other measuring ranges are available

EN 196-1, DIN 1164, BS 3892

��/��������

1 ��������������������

�����4-200 kN

�����0.5-10 kN

���������

���� ���� EN 196-1������� DIN 1164�

���� 3892 BS 3892

Combined compression/flexion testing machine

Class 1, with servo control, digital display and

data storage of peak values

Pressure range: 4 - 200 kN

Flexion range: 0,5 - 10 kN

Other measuring ranges are available

EN 196-1, DIN 1164, BS 3892

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

Cement 1

��

��� ��� ������� 500 kN

Order no. ���������

1.0254

�����0-500 kN

100�200 � 300 ����������

���� 153 ��

�����185 ��

���1�

230 V / 50 Hz���

��� ��������������������

��� ���

��� ��� ��� ���

1.0255

1.0255.01

1.0255.02

1.0255.03

1.0255.04

1.0255.05

Compression testing machine

Hand operated, electronic digital display, measuring

system with microprocessor, 1 transducer

Pressure range: 0 - 500 kN

Also pressure ranges of 100, 200 or 300 kN possible.

Platens diam.: 153 mm

Max. vertical light between platens: 185 mm

Precision: 1 %

230 V / 50 Hz, 1 ph

Also available as machine with gauges with

hand or electric pump.

��/�������� 500/10 ��

� 1.0254����

�����0-500�300 �� 200 kN

�����0-10 �� 20 kN

��������������������

����

Compression/flexion testing machine 500 / 10 kN

As 1.0254, but with:

Pressure range: 0 - 500, 300 or 200 kN

Flexion range: 1 - 10 or 20 kN

Separate bending and compression testing

device necessary.

��

Accessories

����������

Strip printer (optional)

�� 50�50 �������������

Compression device for cubes 50 x 50 mm

�� 70�70 ������������

Compression device for cubes 70 x 70 mm

����� 40�40 ����

Compression device with platens 40 x 40 mm

40�40�160 ��������������


����

���� EN 196������� DIN 1164�NF

P15-451

Flexure testing device for mortar specimens

40 x 40 x 160 mm

EN 196, DIN 1164, NF P15-451

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.41


1.42

��

Cement

TESTING

��� ��� ��/�������� 250/10 250/15 �� ��

Order no. 2 ��������������

1.0256

������

�����25-250 kN

�����1.5-15 kN

�����������

��� ����

�������850�1050�400 ��

���240 ��

���

230 V / 50 Hz���

���� ���� EN 196-1������� DIN 1164�

���� 3892 BS 3892

���

1.0257

���

���

Combined compression/flexion testing machine

250 / 15 kN

Class 2, hand operated, with pressure gauge

reading, integrated load pacer

Pressure range: 25 - 250 kN

Flexion range: 1,5 - 15 kN

Safety guards for the compression area

Realisation as bench type

Overall dimensions w x h x d: 850 x 1050 x 400 mm

Weight: 240 kg

230 V / 50 Hz, 1 ph

EN 196-1, DIN 1164, BS 3892

��/�������� 250/15 ��

1 ��������������������

���������

�� RS 232

�����25-250 kN

�����1.5-15 kN

�����������

����

�������850�850�400 ��

���240 ��

230 V / 50 Hz���

���� ���� EN 196-1������� DIN 1164�

���� 3892 BS 3892

Combined compression/flexion testing machine

250 / 15 kN

Class 1, hand operated, with digital display,

electronic load pacer, peak hold feature,

strength indication, automatic zeroing

Interface: RS 232

Pressure range: 25 - 250 kN

Flexion range: 1,5 - 15 kN

Safety guards for the compression area

Realisation as bench type

Overall dimensions w x h x d: 850 x 850 x 400 mm

Weight: 240 kg

230 V / 50 Hz, 1 ph

EN 196-1, DIN 1164, BS 3892

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

Cement 1

��

��� ��� ������� 250 ��

Order no. 1 �����������

1.0258

���������������

�� RS 232

�����25-250 kN

�������165 ��

�����200 ��

��������������������

����

����

�������850�1050�400 ��

���240 ��

230 V / 50 Hz���

���� ���� EN 196-1��������� ASTM C

109

1.0259

Compression testing machine 250 kN

Class 1, hand operated, with digital display,

electronic load pacer, peak hold feature,

strength indication

RS 232 output

Pressure range: 25 - 250 kN

With platens diam. 165 mm,

vertical daylight 200 mm

For tests on mortar specimens you need a

compression or flexure device.

Realisation as bench type

Overall dimensions w x h x d: 850 x 1050 x 400 mm

Weight: 240 kg

230 V / 50 Hz, 1 ph

EN 196-1, ASTM C 109

��������� 250 ��

1 ��������������������

���

�� RS 232

���� ����

EN 196 �������������

���������������������

�����5-250 kN

���40�40 ��

230 V / 50 Hz���

���� EN 196-1

Automatic compression testing machine 250 kN

Class 1, with servo control, digital display,

electronic load pacer, peak hold features,

strength indication

RS 232 output

All test information required by the EN 196 can

be printed via P.C. with our special software.

Pressure ranges: 5 - 250 kN

Platens: 40 x 40 mm,

230 V / 50 Hz, 1 ph

EN 196-1

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.43


1.44

��

Cement

TESTING

STAR

TESTING

��� ��� ����/�������� 250/15 ��

Order no. 1 �������������

1.0260

��������������� 200 ����

��������������

���� ���� EN 196 �������������

���������������������

�����������

�����5-250 kN

�����0.5-15 kN

�������165 ��

�������1250�1450�460 ��

���360 ��

230 V / 50 Hz���

����

���� EN 196-1

1.0261

1.0262

Automatic compression/flexion testing machine

250 / 15 kN

Class 1, with servo control, digital display,

electronic load pacer, peak hold feature,

strength indication.

A maximum of 200 test data can be stored

for future transmission to P.C. or printer.

All test information required by the EN 196 can

be printed via P.C. with our special software.

Load measurement by pressure transducers.

Pressure ranges: 5 - 250 kN

Flexion range: 0,5 - 15 kN

Overall dimensions w x h x d: 1250 x 1450 x 460 mm

Weight: 360 kg

230 V / 50 Hz, 1 ph

EN 196-1

����/�������� 250/15 ��

� 1.0260������

������ 165 ��

���� 200 ��

��������������������

��

Automatic compression/flexural testing machine

250 / 15 kN

Same machine as 1.0260, but with:

Platens diam. 165 mm, vertical daylight 200 mm

For tests of mortar specimens you need a bending

and a compression device.

��������

Two versions available:

�����������

Load measurement by pressure transducers

�����������������

With two strain gauge load cells for tests with

very low loads

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

1.0263

1.0264

���

Order no.

���

1.0263

1.0264

1.0265

Cement 1

��

��������/��������

250/15 ��

1 ����������������

� �������

� �������� ASCII ����

� ���������������

������������� �� ������

Automatic computerised compression/flexural

testing machine 250 / 15 kN

Class 1, for cement tests, main features:


• Automatic performance of compression and

flexural test

• Works with computer network with ASCII-files

• Elaboration of test data and certifi cate print out

Supplied complete with PC and graphic printer

format A4

��������


Three versions available:

��������/��������

250/15 ��

���������������������

������

�����������

230 V / 50 Hz���

���� EN 196-1

Automatic computerised compression/flexural

testing machine 250 / 15 kN

With integrated compression and flexure testing

devices and control console complete with PC

and printer.

Measurement of force by two pressure transducers

230 V / 50 Hz, 1 ph

EN 196-1

� 1.0263������� 165 ��������

�������������

�����������

���� ���� EN 196-1��������� ASTM C 109

As 1.0263, but with platens diam. 165 mm

Separate bending and compression testing

device necessary.

Measuring of force by pressure transducers

EN 196-1, ASTM C 109

� 1.0264������ 165 ���������

������������

������������

���������

���� EN 196-1��������� ASTM C 109

As 1.0264, but with platens diam. 165 mm

Separate bending and compression testing device

necessary. Measuring of force by electronic

load cells ( For tests with very low loads)

EN 196-1, ASTM C 109

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.45


1.46

��

Cement

TESTING

��� ��� ������

Order no.

1.0232

�����������

������ DIN 4227����� ���� EN 445�

���

1.0233

���

1.0234

Immersion device

For determination of the flow properties of

pre-stressed grout

DIN 4227, EN 445

������

���������������

������ DIN 4227����� ���� EN 445

Measuring device acc. to Schmidt

For rapid volumetric determination of settling

and swelling ratio of intrusion mortar

DIN 4227, EN 445

��������

���������������������

����

������ DIN 4227����� ����

EN 445

Scanning device

For determination of the setting ratio of prestressed

grout, consisting of plexiglass cover

with drilled holes and measuring caliper

DIN 4227, EN 445

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

TESTING

STAR

��� ��� ��������

Order no.

1.0250

�����������

��������8�9�10�11 ��

��� ��� ����

���� EN 445�

���

1.0250.01

1.0250.02

���

���

1.0251

1.0251.01

1.0270

Cement 1

��

Marsh funnel

For determination of the flow properties of mortar.

Nozzles diam.: 8, 9, 10, 11 mm

EN 445

������ 12.5 ��

Nozzle diam. 12.5 mm

���� 150 ��������� 1.5 ��

Sieve, diam. 150 mm, opening 1.5 mm

������

���������������������


����� 1 ����

������4.76 ��

Marsh funnel of rugged, break resistent plastic

For determination of the flow properties of

fluid material (e.g. mud).

Complete with plastic measuring cup 1 l

Nozzle diam. 4.76 mm

� 1.0251������ 10 ��

As 1.0251, but with nozzle diam. 10 mm

�����������

��������������������

�������

�����

���������������������

�����������������

��������������������

�����

Mud balance

For the determination of mud density.

Rigid construction for field use.

The balance consists of a base, graduated arm

with cup, lid, rider, counter weight, spirit level

and knife edge.

The plastic case is designed to hold the balance

in working position.

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.47


1.48

��

Cement

TESTING

��� ��� ��� MFP 1 � MFP 2

Order no. ������ DIN 4127

��������������

���������������������

���

����������

���

���

���

��� ���

��� ��� ���

��� 1.0271

���

1.0272

Filter press MFP 1 and MFP 2

DIN 4127

For the determination of filtration properties

of supporting clay liquids.

Sturdy apparatus made of corrosion-resistant

material, pressure gauge and pressure control,

security valve for compressed air pipe,

air-relief valve.

Simple replacement of sealing and sieve.

��� MFP 1

���������

����� 10 ������� 100 ����

Filter press MFP 1

Pressurizing by CO2-cartridges

Apparatus inclusive CO2-cartridges, 10 ea.

and filter paper, 100 ea.

��� MFP 2

������

����� 100 ���

Filter press MFP 2

For compressed air

Apparatus inclusive filter paper, 100 ea.

��

Accessories

notice.

1.0271.01 ���1 ��100 �

Filter paper, 1 pack = 100 ea.

without

1.0271.02 ������

Measuring cylinder plastic

modification

1.0271.03 ������1 ��10 �

CO2 cartdrigdes, 1 pack = 10 ea.

technical to

1.0271.04 ����

Subject

1 set O-rings

���������������������

Available also for grouts, boring

cement and frac-fluids

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

���������


Subject to technical modification without notice.

���������

TESTING

TESTING

STAR

Cement 1

��

��� ��� ������

Order no. ����������������

1.0273

���������������������

���������������������

����

���� 75 ��

���� 22 ��

���� 0.3 ��

����� 100 ���

���

���

���

1.0274

���

1.0275

1.0275.01

Ring funnel

For simplifi ed determination of the time of

water draining (Control of filtration).

Replaces partially the operations of a filter

press, but without the same precision.

But results are suffi cient to make conclusions

about the properties of clay liquids.

Diameter: ca. 75 mm

Height: ca. 22 mm

Weight: ca. 0.3 kg

Delivered complete with filter paper, 100 ea.

�������������

��������

������� 0.09 �����������

������������

Determination of sand content in clay liquids (mud)

By using sieve and measuring cylinder.

The sand content kit contains sieve 0.09 mm,

funnel and measuring cylinder and is used to

determine the sand content in vol. %

���������

������ DIN 4126

��������������

����������������� 1 ���

����������

�������

���������������������

��

Ball harp

DIN 4126

For the determination of the liquid-flow limit

of supporting clay liquids.

The apparatus consists of support with 2 sets

of balls for ball harp and 2 transparent sampling

vessels 1 l.

Simple and easy to operate measuring apparatus.

All components like balls, disks and vessels can

be odered separately as spare parts.

������9 ���

Set of balls type S - special set of 9 balls

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.49


1.50

��

Cement

TESTING

STAR

/ Spare parts

TESTING

��� ��� ����������

��� Order no. ����������115�240�12 ��

1.0247 ���

���

Grating for testing of the compressive strength

in bed joints

Complete, w x d x h: 115 x 240 x 12 mm

���

1.0247.01

��� ���

���

���

1.0238

���

1.0246

1.0246.01

1.0246.02

1.0278

���� 115�240 ���100 �

Fibrous fleece, 115 x 240 mm, 100 ea.

Determination of the water absorption

coeffi cient of building materials

DIN 52617, ISO 15148

The production of the specimens is made in moulding

rings of stainless steel, 200 mm diam., h = 20 mm

Equipment set for determination of water

retention by the filter paper method

DIN 18555, p. 7, EN 459, p. 2

Complete with filter paper and fibrous fleece

/ Spare parts

���������190�190�2 ���20 �

Filter papers w x d x h: 190 x 190 x 2 mm, 20 ea.

������� 185 ���100 �

Fibrous fleece, 185 mm diam., 100 e.a.

Waterretention of building plasters EN 413-2

The testing set consists of:

brass ring mould, 100 diam. x 25 mm deep,

brass straightedge, 2 kg weight,

rigid plate diam. 110 mm, 1 m 2 cotton gauze,

filter paper diam. 110 mm (500 e.a.),

spatula 150 x 22 mm

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

���������

������ DIN 52617�ISO 15148

������������� 200 �����

20 ��

��������������

������ DIN 18555, T.7����� ����

EN 459

T.2

������������

��

������������� ���� EN 413-2

�����

��������� 100��� 25 �����

������ 2 �������� 110 ���1m 2

����

������� 110 ���500 ����� 150�22

��

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

���

Cement 1

��

��� ��� �����������

Order no.

1.0280

���� ���� EN 459-2

���1000 ���������� 77 ����

���������������������

���

���� 300�50 �/���������� 60

����������� 0-100°C

���

���

1.0281

���

���

���

1.0282

1.0276

Apparatus for determining the reactivity of

lime with water

EN 459-2

The apparatus consists of

Dewar vessel, 1000 ml, 77 mm diam.,

lid of plastic with filling aperture,

bore for stirrer shaft and thermometer,

stand with stirring motor 300 ± 50 rpm,

flat blade paddle agitator 60 mm diam.,

gauged thermometer 0 - 100°C

�����

���� ���� EN 459-2

��������������������

������

���113 ��

���140 ��

Slaking vessel for lime

EN 459-2

For determining the yield of lime by leaving the

sample to slake in an insulated vessel with cover

Inner diameter of the vessel: 113 mm

Height: 140 mm

������������

�������� ����

EN 459-2 �����

������������������� 50

����� 10 ��

Volume constancy test of building lime

According to the alternative method

EN 459-2

Tri-partite steel mould for the production of a

cylindrical specimen, diam. 50 mm, h = 10 mm

��

Accessories

������� 55 ����� 2 ������


�����0-5.5 ����� 0.1 ��

0-55 ����� 1 ��

Compression testing machine 55 kN with two

gauges and handpump

Measuring range: 0 - 5.5 kN, div 0.1 kN

0 - 55 kN, div 1 kN

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.51


1.52

��

Cement

��� ��� �������������

Order no.

1.0248

������ DIN 18555�T.5

���

���

1.0249

���

���

���

1.0285

1.0285.01

1.0285.02

TESTING

Device for determination of the adhesive shear

strength of masonry mortar

DIN 18555, p. 5

�����������

������������

������

�������������

Flow-test channel for grout

An instrument for testing the working properties

of grout.

Material: stainless steel

Design acc. to German Concrete Association

���������������

����������

������

�����1000 ��

�������

�������� 100 ��

�� 90 ��

�� 50 ��

Shrinkage channel for grout and floating screed

To measure shrinkage or expansion

Material: stainless steel

Measuring length: 1000 mm

Frontsides with claws

Dimensions of channel: top 100 mm

bottom 90 mm

height 50 mm

Accessories

Digital gauge with RS 232 for measuring

shrinkage or expansion

Stroke 12 mm, sensitivity 0.01 mm

���

Printer

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

��

�������� RS232 ��������

�����12 ����� 0.01 ��

Subject to technical modification without notice.

���������


Subject to technical modification without notice.

���������

TESTING

Cement 1

��

��� ��� �����

Order no. ���� ����

EN 196-21��������� ASTM

1.0286

C 114��� 17

����������

���������������������

��������������

���

���

���

���

���

��� ���

1.0286.01

1.0286.02

1.0286.03

1.0286.04

1.0286.05

1.0286.06

����

���LED 0-199.9 ppm

��������3-100 ppm

�� 5-100 ppm

�� 100-200 ppm

�� 5-100 ppm

�����1�CV�20 ������� 10ppm

�������3 ppm���5ppm

�����2-6 cm

Flame photometer

EN 196-21, ASTM C 114, Test 17

For determining the alkali content of cement.

Complete with sodium, potassium and lithium

filters, fuel and air connectors, clearing wire,

tubing and hose cups

Technical data

Readout: LED 0 - 199,9 ppm

Sensitivity: Na or K: 3 - 100 ppm

Li: 5 - 100 ppm

Ba: 100 - 200 ppm

Ca: 5 - 100 ppm

Reproducibility: 1 % CV for 20 consecutive

samples using 10 ppm, set to read 100

Linearity: Na or K: 3 ppm, Li: 5 ppm

Sample size: 2 - 6 cm3

Air supply: approx. 6 litres / min at 100 kPa

Fuel: propane, butane or natural gas

w x h x d: 420 x 360 x 300 mm

Weight: 8 kg

230 V / 50 Hz, 1 ph

Accessories

3

���100 ���� 6 �/��

������������

�������420�360�300 ��

���8 ��

230 V / 50 Hz���

��

���� / Calcium filter

���� / Barium filter

������ / Regulator for natural gas

����� / Regulator for propane gas

����� / Regulator for butane gas

����� / Air compressor

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

1.53


1.54

��

Cement

TESTING

��� ��� ��� �������

Order no. ����

���� EN 196-2�EN 459-2

�������� 975�25°C �������

���������

���

1.0287

Loss-on ignition

EN 196-2, EN 459-2

The loss-on-ignition of cement and building lime

can be determined by using a muffle furnace to

oxidize the sample in air at 975 ±25°C.

��������� CWF 11/5

��� 1100°C ��������������


�����4.7 �

��������������140�135�250

��

������������375�585�485 ��

230 V / 50 Hz�2.4 kW

Laboratory chamber kiln model CWF 11/5

For incineration and annealing processes

and material tests up to 1100°C

Internal volume: 4.7 l

Internal dimensions w x h x d: 140 x 135 x 250 mm

External dimensions w x h x d: 375 x 585 x 485 mm

230 V / 50 Hz, 2.4 kW

TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de

Subject to technical modification without notice.

���������

More magazines by this user
Similar magazines