2009 AFR Fork Owner's Manual - Specialized Bicycles

FRAME PIVOT SPECIFICATIONSPart#1.a1.b1.c1.d1.e1.f1.g1.h1.kPart#2.a2.b2.c2.c2.d2.e2.f2.g2.h2.h2.k2.m2.n2.o2.p2.q2.qQty222224424Qty12222211421211111Part DescriptionBB BearingDropout BearingS- Link @ Frame BearingS- Link @ Seatstay BearingBB SpacerDropout Bearing SpacerDropout Teflon Thrust SpacerS-Link @ Frame SpacerS-Link @ Seatstay SpacerPart DescriptionBB AxleBB NutDropout Bolt (Alloy Frame)Dropout Bolt (Carbon Frame)Dropout Washer (Carbon Frame)Dropout Nut (Carbon Frame)S- Link @ Frame BoltS-Link @ Frame NutS- Link @ Seatstay Bolt (Alloy frame)S- Link @ Seatstay Bolt (Carbon frame)S-Link @ Seatstay Nut (Carbon Frame)S-Link @ Seatstay Washer(Alloy / Carbon Frame, bolt side)S-Link @ Seatstay Washer(Carbon Frame, nut side)Lower (Rearward) Shock Eye BoltLower (Rearward) Shock Eye NutUpper (Forward) Shock Eye Bolt (Alloy Frame)Upper (Forward) Shock Eye Bolt (Carbon Frame)Part Specification1524F Full Complement Bearing - 24mm O.D. x 15mm I.D. x 5mm Thick6800V-2RS Full Complement Bearing - 19mm O.D. x 10mm I.D. x 5mm Thick688 Series Bearing - 16mm O.D. x 8mm I.D. x 5mm Thick688 Series Bearing - 16mm O.D. x 8mm I.D. x 5mm ThickAlloy Spacer - 20mm O.D. x 15mm I.D. x 3mm Thick, ChamferedAlloy Spacer - 15mm O.D. x 10mm I.D. x 4.5mm Thick, ChamferedTeflon Washer - 22mm O.D. x 15mm I.D. x 0.85mm ThickAlloy Spacer - 12mm O.D. x 8mm I.D. x 1.4mm Thick, ChamferedAlloy Spacer - 12mm O.D. x 8mm I.D. x 1.4mm Thick, ChamferedB = Blue Loctite requiredPart SpecificationAlloy Axle - M14 Thread (23.5mm Head O.D.) x 64.5mm Shaft Length, 8mm HexAlloy Nut - M14 Thread x 23.5mm O.D , 17mm Socket (use 6-point socket only)Alloy Bolt - M10 Thread x 23.6mm Shaft Length, 4mm Hex, Countersunk HeadAlloy Bolt - M10 Thread x 26.5mm Shaft Length, 4mm HexSteel Washer - 17mm O.D. x 13mm I.D. x 0.3mm ThickAlloy Nut - M10 Thread x 17mm O.D. x 7.6mm Thick, 13mm Open WrenchAlloy Axle - M8 Thread x 52.5mm Shaft Length, 4mm HexAlloy Nut - M8 Thread x 15.7mm O.D., 11mm socket (use 6-point socket only)Alloy Bolt - M8 Thread x 18mm Shaft Length, 4mm HexAlloy Bolt - M8 Thread x 21mm Shaft Length, 4mm HexAlloy Nut - M10 Thread x 15.7mm O.D. x 7.6mm Thick, 13mm Open WrenchTorque in*lb200-230 B120-140 B120-140 B70-90 B70-90 B70-90 BSteel Washer - 14mm O.D. x 8mm I.D. x 0.3mm ThickSteel Washer - 15mm O.D. x 11.5mm I.D. x 0.3mm ThickSteel Bolt - M6 Thread x 32.5mm Shaft Length, 4mm HexAlloy Nut - M6 Thread x 12.6mm O.D., 10mm Socket (use 6-point socket only)Alloy Bolt - M8 Thread x 34mm Shaft Length, 4mm hexAlloy Bolt - M8 Thread x 26.5mm Shaft Length, 4mm hex60-70 B70-90 B70-90 B70-90 B