Definity and Sys 75 7401 Plus Voice Terminal User ... - TextFiles.com

To return to first call 1 Complete second call or put it on hold2 Flash the switchhook●First call is reconnectedNote: By repeatedly using hold, you can toggle backand forth between calls.To put first call on hold 1 Press [ Feature ], then [ 9 ] [dial tone]and place a second call● First call is put on holdNote: Pressing [ Feature ], and [ 9 ] instead of [ # ] givesyou the dial tone needed to place the second call.2 Dial second callTo put second call on 1 Press [ Feature ], then [ # ]hold and return to first ● Second call is put on holdcall2 Flash the switchhook●First call is reconnectedAutomatic CallbackTo automatically place 1another call to anextension that was busy,2did not answer, orreturned a call waitingringback toneNote: You can do thisonly if AutomaticCallback is assigned toyour Feature Directory.3Press [ Feature ], then the Automatic Callback entrynumber (during call attempt) [confirmation tone]Hang up●You will get a 3-burst priority ring when theextension you attempted to call becomes availableNote: After you activate Automatic Callback, thesystem monitors the called extension. That extensionbecomes available after the called party completesa call.Lift handset when you hear priority ring●A call is automatically placed to the extension,which receives regular ringingNote: Automatic Callback is automatically canceledafter 30 minutes or if the callback call is unanswered.10