12.07.2015 Views

Drilling tools - strojotehnika

Drilling tools - strojotehnika

Drilling tools - strojotehnika

SHOW MORE
SHOW LESS
  • No tags were found...

Transform your PDFs into Flipbooks and boost your revenue!

Leverage SEO-optimized Flipbooks, powerful backlinks, and multimedia content to professionally showcase your products and significantly increase your reach.

<strong>Drilling</strong> <strong>tools</strong><strong>Drilling</strong>Centring drills · NC spot drillsFrom page10-3Twist drillsHSS, HSS/Co, solid carbideFrom page10-6Step drills · Cone drill bitsCarbide masonry drillBit <strong>tools</strong>From page10-44Circle cuttersT-A Insert drilling system<strong>Drilling</strong> system GEN3SYSFrom page10-50Solid drilling tool SARA-DRILLSolid drill bits for ISO inserts<strong>Drilling</strong> and turning tool SARA-CUTFrom page10-63Press-polish <strong>tools</strong>Page10-70Hand tapsMachine tapThreading dieFrom page10-71Countersinks, deburring countersinks,piloted counterbores, reverse countersinksIndexable countersink insertsDrill hole deburring <strong>tools</strong>Adjustable precision boring bars · ReamersFrom page10-115D’ANDREAMHD- Modular tool systemFrom page10-134


Summary of icons used for drilling and boring <strong>tools</strong><strong>Drilling</strong>Cutting materialHSSHSS-E HSS-Co PMSolidcarbide(VHM)Carbide(HM)e.g. HSS-Co5 = High-performance, high-speed steelwith 5% cobaltTypeTypeNTypeVATypeWTypeN*TypeNVTypeHTypeTLPNWNVTLPVAN *Hstandard drill for universal applicationsTwist drill for universal applications in soft, long-chipping materialsstandard drill with reinforced core and increased heat resistanceTwist drill with deep hole section for advancement of the chip removal in the case of deep drill holesTwist drill for VA machiningType N with three cutting edges and wider groovesTwist drill for hardened steelsStandardDINISOspecification of standard that the tool meets,e.g. DIN 338, Werksnorm = Company standardJaw quantityNumber of cutting edgesShank designe.g. straight, with whistle notch clamping surface,Morse taper, SDSPoint angle118° 60°for drills, counterbores, countersinks etc.Spiral angle40°for drills, reamers, etc.e.g. 40° right-hand twistCountersink anglefor centring drills,e.g. 60°ThreadMMF G UNF BSW NPT UNCe.g. MF =metric fine threade.g. 60° thread angleToleranceH7ISO 2 6He.g. ISO 2 6H =Metric ISO thread, application class 2, medium tolerance 6HVersionfor manufacturing blind-hole threads or through-hole threadsversion with internal coolant supplyInformationVc/fzYou can find further information such as cutting data recommendations in theSartorius Engineering Handbook no. 019900 1031 or at www.sartorius-werkzeuge.deUsage recommendations image (example)If various cutting materials or coatings are offered, the usage recommendation in that specific case relates to the higher-quality version.materialvery well suitedwell suited< 700 N/mm 2steelhardened steel stainless steel cast iron titanium superalloys Fe/NiCo base aluminium copper graphite< 1000 N/mm 2 < 1400 N/mm 2 < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-2


Centring drill form A• short, long and extra-long• DIN 333 or company standard• Type A• Shank version: cylindrical• S°= point angle 118°• Countersink angle 60°• Cutting material HSS, HSS/Co5 TiAlN-coated• Plain type for centre holes without protected centre according to DIN 333• D 0.5 mm and 0.8 mm, one cutting edgeFig. form A<strong>Drilling</strong>short, DIN 333DmmD1 h8mmLmmL1mmart.no.HSSHSS Co5 TiAlNart.no.0,5 3,15 25 0,6 - 0,9 5 100101 00500,8 3,15 25 1,0 - 1,3 5 100101 00801,0 3,15 31,5 1,3 - 1,7 5 100101 0100 5 100109 01001,25 3,15 31,5 1,6 - 2,0 5 100101 0125 5 100109 01251,6 4 35,5 2,0 - 2,6 5 100101 0160 5 100109 01602,0 5 40 2,5 - 3,1 5 100101 0200 5 100109 02002,5 6,3 45 3,1 - 3,8 5 100101 0250 5 100109 02503,15 8 50 3,9 - 4,6 5 100101 0315 5 100109 03154,0 10 56 5,0 - 5,9 1 100101 0400 1 100109 04005,0 12,5 63 6,3 - 7,2 1 100101 0500 1 100109 05006,3 16 71 8,0 - 8,9 1 100101 06308,0 20 80 10,1 - 11,1 1 100101 080010,0 25 100 12,8 - 13,3 1 100101 10001101 1101Centring drill set, HSS, short, DIN333AContents3 Piece 1.6 x 4.0 mm , 3 pcs. 3.15 x 8.0 mm3 pcs. 2.0 x 5.0 mm ; 2 pcs. 4.0 x 10.0 mm3 pcs. 2.5 x 6.3 mm ; 1 pcs. 5.0 x 12.5 mmHSSart.no.100109 10151101long, company standardDmmD1 h8mmLmmL1mmHSS Co5art.no.0,75 3.5 120 1,0 - 1,3 5 100103 00751,0 4 120 1,3 - 1,7 5 100103 01001,6 5 120 2,0 - 2,6 5 100103 01602,0 6 120 2,5 - 3,1 5 100103 02002,5 8 120 3,1 - 3,8 5 100103 02503,15 10 120 3,9 - 4,6 5 100103 03154,0 10 120 5,0 - 5,9 1 100103 04005,0 14 120 6,3 - 7,2 1 100103 05001101overlong, company standardmaterialDmmD1 h8mmLmmL1mmHSS Co5art.no.2,0 5 200 2,5 - 3,1 5 100104 02002,5 6.3 200 3,1 - 3,8 5 100104 02503,15 8 200 3,9 - 4,6 5 100104 03154,0 10 200 5,0 - 5,9 1 100104 04001101very well suitedsteelhardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-3


Centring drill form B<strong>Drilling</strong>• Type B• Shank version: cylindrical, S°= point angle 118°, Countersink angles 60°/120º• Cutting material HSS• for bell-shaped centre holes 60° and 120° with protected centre• Application of the workpiece to the centre point over a large surface area with the advantages of a bell-type countersink• Suitable for workpieces on which deformation tensions occur during machiningmaterialDmmD1 h8mmLmmL1mm art.no.1,0 4 35 1,3 - 1,7 5 100105 0100Fig. form B1,25 5 40 1,6 - 2,0 5 100105 01251,6 6.3 45 2,0 - 2,6 5 100105 01602,0 8 50 2,5 - 3,1 5 100105 02002,5 10 56 3,1 - 3,8 5 100105 02503,15 11.2 63 3,9 - 4,6 5 100105 03154,0 14 71 5,0 - 5,9 1 100105 04005,0 18 80 6,3 - 7,2 1 100105 05006,3 20 80 8,0 - 8,9 1 100105 06301101very well suitedsteelhardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetRadius centring drill form R• Form R• Shank version: cylindrical, S°= point angle 118°, Countersink angle 60°• Cutting material HSS• Centring bores with radius combine an annular application of the workpiece at the centre point with the advantagesof a bell-type countersink• Suitable for workpieces on which deformation tensions occur during machiningmaterialDmmD1 h8mmRmmLmmL1mm art.no.1,0 3.15 2.9 31 3,0 - 3,3 5 100107 01001,25 3.15 3.15 31 3,3 - 3,6 5 100107 01251,6 4 4 35 4,2 - 4,7 5 100107 01602,0 5 5 40 5,0 - 5,4 5 100107 02002,5 6.3 6.3 45 6,3 - 6,8 5 100107 02503,15 8 8 50 8,0 - 8,5 5 100107 03154,0 10 10 55 10,0 - 10,6 1 100107 04005,0 12.5 12.5 63 12,5 - 13,1 1 100107 05006,3 16 16 71 16,0 - 16,6 1 100107 06301101very well suitedsteelhardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetFig. form RSolid carbide centring drill form A• Type A• Shank version: cylindrical, S°= point angle 120°, Countersink angle 60°• Cutting material solid carbide K10• with application of the workpiece to the centre point over a large surface area• suitable for heavy workpieces when using revolving centre pointsmaterialDmmD1 h8mmLmmL1mm art.no.1,0 3.15 31 1,3 - 1,7 100501 0100Fig. form A1,25 3.15 31 1,6 - 2,0 100501 01251,6 4 35 2,0 - 2,6 100501 01602,0 5 40 2,5 - 3,1 100501 02002,5 6.3 45 3,1 - 3,8 100501 02503,15 8 50 3,9 - 4,6 100501 03154,0 10 56 5,0 - 5,9 100501 04005,0 12.5 63 6,3 - 7,2 100501 05001103very well suitedsteelhardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-4


NC spot drill HSS/Co• S°= point angle 90° or 120°, Shank version: cylindrical• Precision point geometry with slender chisel edge• High stability due to short chip fl utes• Cutting material HSS Co5, HSS/Co5 TiN-coated• For fast drilling on NC/CNC machines and machining centres at precise positionsshortmaterialDmmDmmLmmL1mmart.no.90°120°art.no.4 100 12 100132 0400 100122 04005 120 15 100132 0500 100122 05006 140 20 100132 0600 100122 06008 140 25 100132 0800 100122 08001101 1101very well suitedwell suited120° TiN-coatedLmmL1mmart.no.90°90° TiN-coatedart.no.120°art.no.120° TiN-coatedart.no.3 50 10 100130 0300 100131 0300 100120 0300 100121 03004 52 12 100130 0400 100131 0400 100120 0400 100121 04005 60 15 100130 0500 100131 0500 100120 0500 100121 05006 66 20 100130 0600 100131 0600 100120 0600 100121 06008 79 25 100130 0800 100131 0800 100120 0800 100121 080010 89 25 100130 1000 100131 1000 100120 1000 100121 100012 102 30 100130 1200 100131 1200 100120 1200 100121 120016 115 35 100130 1600 100131 1600 100120 1600 100121 160020 131 40 100130 2000 100131 2000 100120 2000 100121 2000long1101 1101 1101 1101steelhardened steel stainless steel cast irontitaniumDmmLmmL1mmart.no.90°120°art.no.10 170 25 100132 1000 100122 100012 170 30 100132 1200 100122 120016 200 35 100132 1600 100122 160020 200 40 100132 2000 100122 20001101 1101superalloys Fe/NiCo-based aluminium copper graphitealloys< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset<strong>Drilling</strong>Solid carbide NC spot drill• S°= point angle 90° or 120°• Shank version: cylindrical• helically fl uted• Cutting material solid carbide K10• For fast drilling on NC/CNC machines and machining centres at precise positionsmaterialDmmLmmL1mmart.no.90°120°art.no.5,0 62 14 100520 0500 100530 05006,0 66 16 100520 0600 100530 06008,0 79 21 100520 0800 100530 080010,0 89 25 100520 1000 100530 10001103 1103DmmLmmL1mmart.no.90°120°art.no.12,0 102 30 100520 1200 100530 120016,0 115 37,5 100520 1600 100530 160020,0 131 45 100520 2000 100530 2000455 4551103 1103very well suitedsteelhardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset90° 90°Solid carbide NC spot drill, coated• S°= point angle 90° and 142°• Straight shank with diameter up to 5.0 mm and clamping surface starting from 6.0 mm diameter in accordancewith DIN6535-HB• Cutting material, solid carbide superfine grain TiAlN-ultra-coated• Spot drilling and countersinking on NC and CNC machines• Design with point angle of 142° for spot drillingmaterialDmmLmmL1mmart.no.90°142°art.no.2,0 32 6 100525 0200 100535 02003,0 32 8 100525 0300 100535 03004,0 40 10 100525 0400 100535 04005,0 50 13 100525 0500 100535 05006,0 50 13 100525 0600 100535 06001103 1103very well suitedwell suitedDmmLmmL1mmart.no.90°142°art.no.8,0 60 23 100525 0800 100535 080010,0 70 24 100525 1000 100535 100012,0 70 24 100525 1200 100535 120016,0 75 29 100525 1600 100535 160020,0 100 35 100525 2000 100535 20001103 1103superalloys Fe/NiCo-based aluminium copper graphitesteelhardened< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRcsteel< 60 HRc ≥ 60 HRc ferrit./martens.stainless steelaustenitic duplexcast irontitaniumGG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset90° 90°All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-5


Twist drill DIN 338Sorted by DIN<strong>Drilling</strong>brandRoll-milled Ground bare ALU Deep-hole section Deep-hole section Deep-hole section Deep-hole section VAdiameter range / mm 1.0 to 16.0 1.0 to 16.0 0.4 to 20.0 1.0 to 14.0 1.0 to 16.0 1.0 to 12.0 1.0 to 12.0 1.0 to 12.0 1.0 to 16.0 1.0 to 13.0 1.0 to 13.0 1.0 to 14.0 1.0 to 12.0type N N N W N TLP TLP TLP TLP VA NV Npoint angle 118° 118° 118° 130° 130° 130° 130° 130° 130° 130° 135° 130° 118°cutting material HSS HSS HSS HSS HSS/Co HSS HSS/Co HSS/Co HSS/Co HSS/Co HSS/Co HSS-E-PM Solid carbidecoating vap. TiAlN TiN vap. TiNart.no. 101001.... 101002.... 101005.... 101017.... 101010.... 101011.... 101012.... 101013.... 101014.... 101018.... 101016.... 101095.... 111010....catalogue page 10-8/9 10-8/9 10-8/9 10-11 10-9/10 10-9/10 10-9/10 10-9/10 10-9/10 10-11 10-12 10-26 10-13material groupsUsage recommendationssteel < 700 N/mm 2steel < 1000 N/mm 2steel < 1400 N/mm 2hardened steel < 55 HRchardened steel < 60 HRchardened steel ≥ 60 HRcstainless steel ferritic / martensiticstainless steel austeniticstainless steel duplexcast iron GG/GTScast iron GGGtitanium alloyssuperalloys Fe/NiCo base < 30 HRcsuperalloys Fe/NiCo base ≥ 30 HRcaluminium < 8 % Sialuminium ≥ 8 % Sicopper Cu-alloygraphite GRP/CFP/thermosetHardox 450Twist drill DIN 338 DIN 340 DIN 341 DIN 343 DIN 344 DIN 345 DIN 1869Sorted by DINbrandVA Deep-hole section Core drill Core drill Series 1 to 3diameter range / mm 1.0 to 12.0 1.0 to 12.0 1.0 to 12.0 1.0 to 12.0 0.60 to 16.0 10.0 to 50.0 7.8 to 40.0 4.8 to 12.0 12.0 to 35.0 12.0 to 50.0 5.0 to 50.0 2.0 to 10.0type N N VA TLP N N N N N N N TLPpoint angle 118° 118° 130° 130° 118° 118° 118° 118° 118° 130°cutting material Solid carbide Solid carbide HSS/Co HSS HSS HSS HSS HSS HSS/Co HSS HSS HSScoating TiN TiAlN TiN vap. vap. vap.art.no. 111011.... 111012.... 101062.... 101061.... 101060.... 101601.... 101515.... 101510.... 101507.... 101501.... 101505.... 101070....catalogue page 10-13 10-13 10-21 10-21 10-20 10-23 10-24 10-23 10-22 10-22 10-22 10-17material groupsUsage recommendationssteel < 700 N/mm 2steel < 1000 N/mm 2steel < 1400 N/mm 2hardened steel < 55 HRchardened steel < 60 HRchardened steel ≥ 60 HRcstainless steel ferritic / martensiticstainless steel austeniticstainless steel duplexcast iron GG/GTScast iron GGGtitanium alloyssuperalloys Fe/NiCo base < 30 HRcsuperalloys Fe/NiCo base ≥ 30 HRcaluminium < 8 % Sialuminium ≥ 8 % Sicopper Cu-alloygraphite GRP/CFP/thermoset10-6


DIN 1897 DIN 1898A DIN 1899 DIN 6535K DIN 6537 DIN 6539<strong>Drilling</strong>Deep-hole section Deep-hole section From 0.05 mm S-Class Up to 3xD / 5xD 8xD Up to 3xD Up to 3xD, IC Up to 5xD, IC1.0 to 12.0 1.0 to 20.0 1.0 to 25.0 1.0 to 13.0 2.0 to 18.0 1.0 to 14.0 1.5 to 12.0 0.05 to 1.50 3.0 to 20.0 3.0 to 20.0 3.0 to 20.0 3.0 to 20.0 3.0 to 20.0 3.0 to 20.0 1.0 to 16.0 1.0 to 16.0N TLP N N Ultra-M INOX-DRILL N N N N N130° 130° 118° 130° 135° 130° 118° 118° 145° 140° 140° 140° 140° 140° 118° 118°HSS/Co HSS/Co HSS HSS/Co HSS/Co HSS-E-PM HSS HSS-E-PM Solid carbide K10F Solid carbide Solid carbide Solid carbide Solid carbide Solid carbide Solid carbide Solid carbidevap. vap. TiN X-AlCr TiN AlTiN TiAlN-Ultra-M TiAlN TiAlNplus TiAlNplus TiAlNplus TiN101055.... 101052.... 101050.... 101051.... 115001.... 101085.... 101025.... 101075.... 111301....111545.... to111505.... 111510....111542.... 111502....111548...111506.... 111511....111005.... 111008....10-14/15 10-16 10-14/15 10-16 10-15 10-26 10-18 10-17 10-33 10-34/35 10-36 10-37 10-37 10-39 10-19 10-19Usage recommendationsDIN 6539 DIN 8037 Company standardCountersink/counterbore Countersink/counterbore Carbide-fitted Shank diameter 12.7 GDS / GDR GDS / GDR TDXL Micro-drill Hard drill Up to 7xD, IC Up to 7xD, IC Up to 12xD, IC Up to 10xD, IC Up to 5xD / 8xD1.0 to 16.0 3.0 to 16.0 3.0 to 16.0 3.0 to 16.0 13.5 bis 25.0 1.0 to 20.0 1.0 to 12.0 1.6 to 12.0 0.1 to 3.0 2.0 to 12.0 3.0 to 20.0 4.0 to 20.0 4.0 to 20.0 2.0 to 12.0 2.5 to 20.0N N*) N*) N N EX-SUS NEXUS H N N TLP118° 150° 150° 118° 118° 120° - 140° 120° - 140° 120° 118° to 130° 140° 140° 140° 140° 140° 135°Solid carbide Solid carbide Solid carbide Solid carbide K10 HSS HSS-E-V3 HSS HSS/Co Solid carbide Solid carbide Solid carbide Solid carbide Solid carbide Solid carbide Solid carbideTiAlN TiN vap. TiN WDI TM WXL TiAlN TiAlN TiAlN TiAlN TiAlN TiAlN aluminium CC111009.... 111013.... 111014.... 110501.... 101080....114045.... 114046....114050.... 114051....101100.... 111550.... 111520.... 111513.... 111519.... 111514.... 111515.... 111400....10-19 10-20 10-20 10-31 10-18 10-28/29 10-30 10-25 10-32 10-31 10-40 10-40 10-41 10-42 10-43Usage recommendationsAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-7


Twist drill HSS 118°<strong>Drilling</strong>• Shank version: cylindrical• Cutting material HSS• 101001.... roller-milled• 101002.... with bare surface for production• 101005.... profi le ground, from Ø 2.3 mm vaporised, point thinning from Ø >1 mmRoll-milledBare surfacevaporizedD h8mmLmmL1mmRoll-milledart.no.Bare surfaceart.no.vaporizedart.no.0,4 20 5 10 101002 0040 10 101005 00400,5 22 6 10 101002 0050 10 101005 00500,6 24 7 10 101002 0060 10 101005 00600,7 28 9 10 101002 0070 10 101005 00700,8 30 10 10 101002 0080 10 101005 00800,9 32 11 10 101002 0090 10 101005 00901,0 34 12 10 101001 0100 10 101002 0100 10 101005 01001,1 36 14 10 101001 0110 10 101002 0110 10 101005 01101,2 38 16 10 101001 0120 10 101002 0120 10 101005 01201,3 38 16 10 101001 0130 10 101002 0130 10 101005 01301,4 40 18 10 101001 0140 10 101002 0140 10 101005 01401,5 40 18 10 101001 0150 10 101002 0150 10 101005 01501,6 43 20 10 101001 0160 10 101002 0160 10 101005 01601,7 43 20 10 101001 0170 10 101002 0170 10 101005 01701,8 46 22 10 101001 0180 10 101002 0180 10 101005 01801,9 46 22 10 101001 0190 10 101002 0190 10 101005 01902,0 49 24 10 101001 0200 10 101002 0200 10 101005 02002,1 49 24 10 101001 0210 10 101002 0210 10 101005 02102,2 53 27 10 101001 0220 10 101002 0220 10 101005 02202,3 53 27 10 101001 0230 10 101002 0230 10 101005 02302,4 57 30 10 101001 0240 10 101002 0240 10 101005 02402,5 57 30 10 101001 0250 10 101002 0250 10 101005 02502,6 57 30 10 101001 0260 10 101002 0260 10 101005 02602,7 61 33 10 101001 0270 10 101002 0270 10 101005 02702,8 61 33 10 101001 0280 10 101002 0280 10 101005 02802,9 61 33 10 101001 0290 10 101002 0290 10 101005 02903,0 61 33 10 101001 0300 10 101002 0300 10 101005 03003,1 65 36 10 101001 0310 10 101002 0310 10 101005 03103,2 65 36 10 101001 0320 10 101002 0320 10 101005 03203,3 65 36 10 101001 0330 10 101002 0330 10 101005 03303,4 70 39 10 101001 0340 10 101002 0340 10 101005 03403,5 70 39 10 101001 0350 10 101002 0350 10 101005 03503,6 70 39 10 101001 0360 10 101002 0360 10 101005 03603,7 70 39 10 101001 0370 10 101002 0370 10 101005 03703,8 75 43 10 101001 0380 10 101002 0380 10 101005 03803,9 75 43 10 101001 0390 10 101002 0390 10 101005 03904,0 75 43 10 101001 0400 10 101002 0400 10 101005 04004,1 75 43 10 101001 0410 10 101002 0410 10 101005 04104,2 75 43 10 101001 0420 10 101002 0420 10 101005 04204,3 80 47 10 101001 0430 10 101002 0430 10 101005 04304,4 80 47 10 101001 0440 10 101002 0440 10 101005 04404,5 80 47 10 101001 0450 10 101002 0450 10 101005 04504,6 80 47 10 101001 0460 10 101002 0460 10 101005 04604,7 80 47 10 101001 0470 10 101002 0470 10 101005 04704,8 86 52 10 101001 0480 10 101002 0480 10 101005 04804,9 86 52 10 101001 0490 10 101002 0490 10 101005 04905,0 86 52 10 101001 0500 10 101002 0500 10 101005 05005,1 86 52 10 101001 0510 10 101002 0510 10 101005 05105,2 86 52 10 101001 0520 10 101002 0520 10 101005 05205,3 86 52 10 101001 0530 10 101002 0530 10 101005 05305,4 93 57 10 101001 0540 10 101002 0540 10 101005 05405,5 93 57 10 101001 0550 10 101002 0550 10 101005 05505,6 93 57 10 101001 0560 10 101002 0560 10 101005 05605,7 93 57 10 101001 0570 10 101002 0570 10 101005 05705,8 93 57 10 101001 0580 10 101002 0580 10 101005 05805,9 93 57 10 101001 0590 10 101002 0590 10 101005 05906,0 93 57 10 101001 0600 10 101002 0600 10 101005 06006,1 101 63 1 101001 0610 1 101002 0610 1 101005 06106,2 101 63 1 101001 0620 1 101002 0620 1 101005 06206,3 101 63 1 101001 0630 1 101002 0630 1 101005 06306,4 101 63 1 101001 0640 1 101002 0640 1 101005 06401137 1104 110410-8D h8mmLmmL1mmRoll-milledart.no.Bare surfaceart.no.vaporizedart.no.6,5 101 63 1 101001 0650 1 101002 0650 1 101005 06506,6 101 63 1 101001 0660 1 101002 0660 1 101005 06606,7 101 63 1 101001 0670 1 101002 0670 1 101005 06706,8 109 69 1 101001 0680 1 101002 0680 1 101005 06806,9 109 69 1 101001 0690 1 101002 0690 1 101005 06907,0 109 69 1 101001 0700 1 101002 0700 1 101005 07007,1 109 69 1 101001 0710 1 101002 0710 1 101005 07107,2 109 69 1 101001 0720 1 101002 0720 1 101005 07207,3 109 69 1 101001 0730 1 101002 0730 1 101005 07307,4 109 69 1 101001 0740 1 101002 0740 1 101005 07407,5 109 69 1 101001 0750 1 101002 0750 1 101005 07507,6 117 75 1 101001 0760 1 101002 0760 1 101005 07607,7 117 75 1 101001 0770 1 101002 0770 1 101005 07707,8 117 75 1 101001 0780 1 101002 0780 1 101005 07807,9 117 75 1 101001 0790 1 101002 0790 1 101005 07908,0 117 75 1 101001 0800 1 101002 0800 1 101005 08008,1 117 75 1 101001 0810 1 101002 0810 1 101005 08108,2 117 75 1 101001 0820 1 101002 0820 1 101005 08208,3 117 75 1 101001 0830 1 101002 0830 1 101005 08308,4 117 75 1 101001 0840 1 101002 0840 1 101005 08408,5 117 75 1 101001 0850 1 101002 0850 1 101005 08508,6 125 81 1 101001 0860 1 101002 0860 1 101005 08608,7 125 81 1 101001 0870 1 101002 0870 1 101005 08708,8 125 81 1 101001 0880 1 101002 0880 1 101005 08808,9 125 81 1 101001 0890 1 101002 0890 1 101005 08909,0 125 81 1 101001 0900 1 101002 0900 1 101005 09009,1 125 81 1 101001 0910 1 101002 0910 1 101005 09109,2 125 81 1 101001 0920 1 101002 0920 1 101005 09209,3 125 81 1 101001 0930 1 101002 0930 1 101005 09309,4 125 81 1 101001 0940 1 101002 0940 1 101005 09409,5 125 81 1 101001 0950 1 101002 0950 1 101005 09509,6 133 87 1 101001 0960 1 101002 0960 1 101005 09609,7 133 87 1 101001 0970 1 101002 0970 1 101005 09709,8 133 87 1 101001 0980 1 101002 0980 1 101005 09809,9 133 87 1 101001 0990 1 101002 0990 1 101005 099010,0 133 87 1 101001 1000 1 101002 1000 1 101005 100010,1 133 87 1 101001 1010 1 101002 1010 1 101005 101010,2 133 87 1 101001 1020 1 101002 1020 1 101005 102010,3 133 87 1 101001 1030 1 101002 1030 1 101005 103010,4 133 87 1 101001 1040 1 101002 1040 1 101005 104010,5 133 87 1 101001 1050 1 101002 1050 1 101005 105010,6 133 87 1 101002 1060 1 101005 106010,7 142 94 1 101002 1070 1 101005 107010,8 142 94 1 101002 1080 1 101005 108010,9 142 94 1 101002 1090 1 101005 109011,0 142 94 1 101001 1100 1 101002 1100 1 101005 110011,1 142 94 1 101002 1110 1 101005 111011,2 142 94 1 101002 1120 1 101005 112011,3 142 94 1 101001 1130 1 101002 1130 1 101005 113011,4 142 94 1 101002 1140 1 101005 114011,5 142 94 1 101001 1150 1 101002 1150 1 101005 115011,6 142 94 1 101002 1160 1 101005 116011,7 142 94 1 101002 1170 1 101005 117011,8 142 94 1 101002 1180 1 101005 118011,9 151 101 1 101002 1190 1 101005 119012,0 151 101 1 101001 1200 1 101002 1200 1 101005 120012,1 151 101 1 101005 121012,2 151 101 1 101002 1220 1 101005 122012,3 151 101 1 101005 123012,4 151 101 1 101005 124012,5 151 101 1 101001 1250 1 101002 1250 1 101005 12501137 1104 1104


D h8mmmaterialLmmL1mmvery well suitedwell suitedRoll-milledart.no.Bare surfaceart.no.vaporizedart.no.12,6 151 101 1 101005 126012,7 151 101 1 101005 127012,8 151 101 1 101002 1280 1 101005 128012,9 151 101 1 101005 129013,0 151 101 1 101001 1300 1 101002 1300 1 101005 130013,25 160 108 1 101005 132513,5 160 108 1 101001 1350 1 101002 1350 1 101005 135013,6 160 108 1 101005 136013,75 160 108 1 101005 137514,0 160 108 1 101001 1400 1 101002 1400 1 101005 140014,25 169 114 1 101005 142514,5 169 114 1 101001 1450 1 101002 1450 1 101005 145014,75 169 114 1 101002 1475 1 101005 1475D h8mmLmm1137 1104 11041137 1104 1104steel hardened steel stainless steel cast ironTitanium Superalloys Fe/NiCo-based Aluminium Copper Graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/ThermosetL1mmRoll-milledart.no.Bare surfaceart.no.vaporizedart.no.15,0 169 114 1 101001 1500 1 101002 1500 1 101005 150015,25 178 120 1 101002 1525 1 101005 152515,5 178 120 1 101001 1550 1 101002 1550 1 101005 155015,75 178 120 1 101005 157516,0 178 120 1 101001 1600 1 101002 1600 1 101005 160016,5 187 125 1 101002 1650 1 101005 165017,0 187 125 1 101002 1700 1 101005 170017,5 196 130 1 101002 1750 1 101005 175018,0 196 130 1 101002 1800 1 101005 180018,5 205 135 1 101002 1850 1 101005 185019,0 205 135 1 101002 1900 1 101005 190019,5 214 140 1 101002 1950 1 101005 195020,0 214 140 1 101002 2000 1 101005 2000<strong>Drilling</strong>Twist drill HSS 130°• <strong>Drilling</strong> without accurate centring• Shank version: cylindrical• S°= point angle 130°• Cutting material HSS, HSS/Co5,HSS/Co5 TiN,HSS/Co5 TiAINType N, HSS/Co5Type TLP, HSSHSS/Co5, TiAlNType TLP , HSS/ Co5HSS/Co5 ,TiND h8mmLmmL1mmType N, HSS/Co5art.no.Type TLP, HSSart.no.HSS/Co5, TiAlNart.no.Type TLP , HSS/ Co5art.no.HSS/Co5 ,TiNart.no.1,0 34 12 10 101010 0100 10 101011 0100 10 101012 0100 10 101013 0100 10 101014 01001,1 36 14 10 101010 0110 10 101011 0110 10 101012 0110 10 101013 0110 10 101014 01101,2 38 16 10 101010 0120 10 101011 0120 10 101012 0120 10 101013 0120 10 101014 01201,3 38 16 10 101010 0130 10 101011 0130 10 101012 0130 10 101013 0130 10 101014 01301,4 40 18 10 101010 0140 10 101011 0140 10 101012 0140 10 101013 0140 10 101014 01401,5 40 18 10 101010 0150 10 101011 0150 10 101012 0150 10 101013 0150 10 101014 01501,6 43 20 10 101010 0160 10 101011 0160 10 101012 0160 10 101013 0160 10 101014 01601,65 43 20 10 101010 01651,7 43 20 10 101010 0170 10 101011 0170 10 101012 0170 10 101013 0170 10 101014 01701,8 46 22 10 101010 0180 10 101011 0180 10 101012 0180 10 101013 0180 10 101014 01801,9 46 22 10 101010 0190 10 101011 0190 10 101012 0190 10 101013 0190 10 101014 01902,0 49 24 10 101010 0200 10 101011 0200 10 101012 0200 10 101013 0200 10 101014 02002,1 49 24 10 101010 0210 10 101011 0210 10 101012 0210 10 101013 0210 10 101014 02102,2 53 27 10 101010 0220 10 101011 0220 10 101012 0220 10 101013 0220 10 101014 02202,3 53 27 10 101010 0230 10 101011 0230 10 101012 0230 10 101013 0230 10 101014 02302,4 57 30 10 101010 0240 10 101011 0240 10 101012 0240 10 101013 0240 10 101014 02402,5 57 30 10 101010 0250 10 101011 0250 10 101012 0250 10 101013 0250 10 101014 02502,6 57 30 10 101010 0260 10 101011 0260 10 101012 0260 10 101014 02602,7 61 33 10 101010 0270 10 101011 0270 10 101012 0270 10 101013 0270 10 101014 02702,8 61 33 10 101010 0280 10 101011 0280 10 101012 0280 10 101013 0280 10 101014 02802,9 61 33 10 101010 0290 10 101011 0290 10 101012 0290 10 101013 0290 10 101014 02903,0 61 33 10 101010 0300 10 101011 0300 10 101012 0300 10 101013 0300 10 101014 03003,1 65 36 10 101010 0310 10 101011 0310 10 101012 0310 10 101013 0310 10 101014 03103,2 65 36 10 101010 0320 10 101011 0320 10 101012 0320 10 101013 0320 10 101014 03203,3 65 36 10 101010 0330 10 101011 0330 10 101012 0330 10 101013 0330 10 101014 03303,4 70 39 10 101010 0340 10 101011 0340 10 101012 0340 10 101013 0340 10 101014 03403,5 70 39 10 101010 0350 10 101011 0350 10 101012 0350 10 101013 0350 10 101014 03503,6 70 39 10 101010 0360 10 101011 0360 10 101012 0360 10 101013 0360 10 101014 03603,7 70 39 10 101010 0370 10 101011 0370 10 101012 0370 10 101013 0370 10 101014 03703,8 75 43 10 101010 0380 10 101011 0380 10 101012 0380 10 101013 0380 10 101014 03803,9 75 43 10 101010 0390 10 101011 0390 10 101012 0390 10 101013 0390 10 101014 03904,0 75 43 10 101010 0400 10 101011 0400 10 101012 0400 10 101013 0400 10 101014 04004,1 75 43 10 101010 0410 10 101011 0410 10 101012 0410 10 101013 0410 10 101014 04101104 1104 1104 1104 1104All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-9


<strong>Drilling</strong>D h8mmLmmL1mmType N, HSS/Co5art.no.Type TLP, HSSart.no.HSS/Co5, TiAlNart.no.Type TLP , HSS/ Co5art.no.HSS/Co5 ,TiNart.no.4,2 75 43 10 101010 0420 10 101011 0420 10 101012 0420 10 101013 0420 10 101014 04204,3 80 47 10 101010 0430 10 101011 0430 10 101012 0430 10 101013 0430 10 101014 04304,4 80 47 10 101010 0440 10 101011 0440 10 101012 0440 10 101013 0440 10 101014 04404,5 80 47 10 101010 0450 10 101011 0450 10 101012 0450 10 101013 0450 10 101014 04504,6 80 47 10 101010 0460 10 101011 0460 10 101012 0460 10 101014 04604,7 80 47 10 101010 0470 10 101011 0470 10 101012 0470 10 101014 04704,8 86 52 10 101010 0480 10 101011 0480 10 101012 0480 10 101013 0480 10 101014 04804,9 86 52 10 101010 0490 10 101011 0490 10 101012 0490 10 101014 04905,0 86 52 10 101010 0500 10 101011 0500 10 101012 0500 10 101013 0500 10 101014 05005,1 86 52 10 101010 0510 10 101011 0510 10 101012 0510 10 101013 0510 10 101014 05105,2 86 52 10 101010 0520 10 101011 0520 10 101012 0520 10 101013 0520 10 101014 05205,3 86 52 10 101010 0530 10 101011 0530 10 101012 0530 10 101013 0530 10 101014 05305,4 93 57 10 101010 0540 10 101011 0540 10 101012 0540 10 101013 0540 10 101014 05405,5 93 57 10 101010 0550 10 101011 0550 10 101012 0550 10 101013 0550 10 101014 05505,6 93 57 10 101010 0560 10 101011 0560 10 101012 0560 10 101014 05605,7 93 57 10 101010 0570 10 101011 0570 10 101012 0570 10 101013 0570 10 101014 05705,8 93 57 10 101010 0580 10 101011 0580 10 101012 0580 10 101013 0580 10 101014 05805,9 93 57 10 101010 0590 10 101011 0590 10 101012 0590 10 101014 05906,0 93 57 10 101010 0600 10 101011 0600 10 101012 0600 10 101013 0600 10 101014 06006,1 101 63 1 101010 0610 1 101011 0610 1 101012 0610 1 101014 06106,2 101 63 1 101010 0620 1 101011 0620 1 101012 0620 1 101013 0620 1 101014 06206,3 101 63 1 101010 0630 1 101011 0630 1 101012 0630 1 101013 0630 1 101014 06306,4 101 63 1 101010 0640 1 101011 0640 1 101012 0640 1 101014 06406,5 101 63 1 101010 0650 1 101011 0650 1 101012 0650 1 101013 0650 1 101014 06506,6 101 63 1 101010 0660 1 101011 0660 1 101012 0660 1 101014 06606,7 101 63 1 101010 0670 1 101011 0670 1 101012 0670 1 101013 0670 1 101014 06706,8 109 69 1 101010 0680 1 101011 0680 1 101012 0680 1 101013 0680 1 101014 06806,9 109 69 1 101010 0690 1 101011 0690 1 101012 0690 1 101013 0690 1 101014 06907,0 109 69 1 101010 0700 1 101011 0700 1 101012 0700 1 101013 0700 1 101014 07007,1 109 69 1 101010 0710 1 101011 0710 1 101012 0710 1 101013 0710 1 101014 07107,2 109 69 1 101010 0720 1 101011 0720 1 101012 0720 1 101014 07207,3 109 69 1 101010 0730 1 101011 0730 1 101012 0730 1 101014 07307,4 109 69 1 101010 0740 1 101011 0740 1 101012 0740 1 101013 0740 1 101014 07407,5 109 69 1 101010 0750 1 101011 0750 1 101012 0750 1 101013 0750 1 101014 07507,6 117 75 1 101010 0760 1 101011 0760 1 101012 0760 1 101014 07607,7 117 75 1 101010 0770 1 101011 0770 1 101012 0770 1 101014 07707,8 117 75 1 101010 0780 1 101011 0780 1 101012 0780 1 101013 0780 1 101014 07807,9 117 75 1 101010 0790 1 101011 0790 1 101012 0790 1 101013 0790 1 101014 07908,0 117 75 1 101010 0800 1 101011 0800 1 101012 0800 1 101013 0800 1 101014 08008,1 117 75 1 101010 0810 1 101011 0810 1 101012 0810 1 101014 08108,2 117 75 1 101010 0820 1 101011 0820 1 101012 0820 1 101013 0820 1 101014 08208,3 117 75 1 101010 0830 1 101011 0830 1 101012 0830 1 101014 08308,4 117 75 1 101010 0840 1 101011 0840 1 101012 0840 1 101014 08408,5 117 75 1 101010 0850 1 101011 0850 1 101012 0850 1 101013 0850 1 101014 08508,6 125 81 1 101010 0860 1 101011 0860 1 101012 0860 1 101014 08608,7 125 81 1 101010 0870 1 101011 0870 1 101012 0870 1 101014 08708,8 125 81 1 101010 0880 1 101011 0880 1 101012 0880 1 101013 0880 1 101014 08808,9 125 81 1 101010 0890 1 101011 0890 1 101012 0890 1 101014 08909,0 125 81 1 101010 0900 1 101011 0900 1 101012 0900 1 101013 0900 1 101014 09009,1 125 81 1 101010 0910 1 101011 0910 1 101012 0910 1 101014 09109,2 125 81 1 101010 0920 1 101011 0920 1 101012 0920 1 101013 0920 1 101014 09209,3 125 81 1 101010 0930 1 101011 0930 1 101012 0930 1 101014 09309,4 125 81 1 101010 0940 1 101011 0940 1 101012 0940 1 101014 09409,5 125 81 1 101010 0950 1 101011 0950 1 101012 0950 1 101013 0950 1 101014 09509,6 133 87 1 101010 0960 1 101011 0960 1 101012 0960 1 101014 09609,7 133 87 1 101010 0970 1 101011 0970 1 101012 0970 1 101013 0970 1 101014 09709,8 133 87 1 101010 0980 1 101011 0980 1 101012 0980 1 101014 09809,9 133 87 1 101010 0990 1 101011 0990 1 101012 0990 1 101014 099010,0 133 87 1 101010 1000 1 101011 1000 1 101012 1000 1 101013 1000 1 101014 100010,2 133 87 1 101010 1020 1 101011 1020 1 101012 1020 1 101013 1020 1 101014 102010,5 133 87 1 101010 1050 1 101011 1050 1 101012 1050 1 101013 1050 1 101014 105011,0 142 94 1 101010 1100 1 101011 1100 1 101012 1100 1 101013 1100 1 101014 110011,5 142 94 1 101010 1150 1 101011 1150 1 101012 1150 1 101013 1150 1 101014 115011,8 142 94 1 101010 1180 1 101012 1180 1 101014 118012,0 151 101 1 101010 1200 1 101011 1200 1 101012 1200 1 101013 1200 1 101014 120012,2 151 101 1 101010 122012,5 151 101 1 101010 1250 1 101012 1250 1 101014 125013,0 151 101 1 101010 1300 1 101012 1300 1 101014 130013,5 160 108 1 101010 1350 1 101012 1350 1 101014 135014,0 160 108 1 101010 1400 1 101012 1400 1 101014 140014,5 169 114 1 101010 1450 1 101014 145015,0 169 114 1 101010 1500 1 101012 1500 1 101014 150015,5 178 120 1 101010 1550 1 101014 155016,0 178 120 1 101010 1600 1 101012 1600 1 101014 16001104 1104 1104 1104 110410-10


AluINOXType W , HSSType VA, HSS/Co5Especially for ALU and INOX machiningmaterialD h8mmLmmL1mmType W , HSSart.no.Type VA, HSS/Co5art.no.1,0 34 12 10 101017 0100 10 101018 01001,1 36 14 10 101018 01101,2 38 16 10 101017 0120 10 101018 01201,3 38 16 10 101018 01301,4 40 18 10 101018 01401,5 40 18 10 101017 0150 10 101018 01501,6 43 20 10 101017 0160 10 101018 01601,7 43 20 10 101017 0170 10 101018 01701,8 46 22 10 101017 0180 10 101018 01801,9 46 22 10 101017 0190 10 101018 01902,0 49 24 10 101017 0200 10 101018 02002,1 49 24 10 101017 0210 10 101018 02102,2 53 27 10 101017 0220 10 101018 02202,3 53 27 10 101017 0230 10 101018 02302,4 57 30 10 101017 0240 10 101018 02402,5 57 30 10 101017 0250 10 101018 02502,6 57 30 10 101017 0260 10 101018 02602,7 61 33 10 101017 0270 10 101018 02702,8 61 33 10 101017 0280 10 101018 02802,9 61 33 10 101018 02903,0 61 33 10 101017 0300 10 101018 03003,1 65 36 10 101017 0310 10 101018 03103,2 65 36 10 101017 0320 10 101018 03203,3 65 36 10 101017 0330 10 101018 03303,4 70 39 10 101017 0340 10 101018 03403,5 70 39 10 101017 0350 10 101018 03503,6 70 39 10 101017 0360 10 101018 03603,7 70 39 10 101017 0370 10 101018 03703,8 75 43 10 101017 0380 10 101018 03803,9 75 43 10 101017 0390 10 101018 03904,0 75 43 10 101017 0400 10 101018 04004,1 75 43 10 101017 0410 10 101018 04104,2 75 43 10 101017 0420 10 101018 04204,3 80 47 10 101017 0430 10 101018 04304,4 80 47 10 101018 04404,5 80 47 10 101017 0450 10 101018 04504,6 80 47 10 101018 04604,7 80 47 10 101018 04704,8 86 52 10 101017 0480 10 101018 04804,9 86 52 10 101018 04905,0 86 52 10 101017 0500 10 101018 05005,1 86 52 10 101018 05105,2 86 52 10 101017 0520 10 101018 05205,3 86 52 10 101017 0530 10 101018 05305,4 93 57 10 101018 05405,5 93 57 10 101017 0550 10 101018 05505,6 93 57 10 101018 05605,7 93 57 10 101017 0570 10 101018 05705,8 93 57 10 101018 05805,9 93 57 10 101017 0590 10 101018 05906,0 93 57 10 101017 0600 10 101018 06001104 1104very well suitedwell suitedType N, HSS/Co5Type TLP, HSSHSS/Co5, TiAlNType TLP , HSS/ Co5HSS/Co5 ,TiNType W , HSSType VA, HSS/Co5D h8mmLmmL1mmType W , HSSart.no.Type VA, HSS/Co5art.no.6,1 101 63 1 101017 0610 1 101018 06106,2 101 63 1 101017 0620 1 101018 06206,3 101 63 1 101018 06306,4 101 63 1 101018 06406,5 101 63 1 101017 0650 1 101018 06506,6 101 63 1 101017 0660 1 101018 06606,7 101 63 1 101018 06706,8 109 69 1 101017 0680 1 101018 06806,9 109 69 1 101018 06907,0 109 69 1 101017 0700 1 101018 07007,1 109 69 1 101018 07107,2 109 69 1 101018 07207,3 109 69 1 101018 07307,4 109 69 1 101018 07407,5 109 69 1 101017 0750 1 101018 07507,6 117 75 1 101018 07607,7 117 75 1 101018 07707,8 117 75 1 101018 07807,9 117 75 1 101018 07908,0 117 75 1 101017 0800 1 101018 08008,1 117 75 1 101018 08108,2 117 75 1 101017 0820 1 101018 08208,3 117 75 1 101018 08308,4 117 75 1 101017 0840 1 101018 08408,5 117 75 1 101017 0850 1 101018 08508,6 125 81 1 101018 08608,7 125 81 1 101018 08708,8 125 81 1 101018 08808,9 125 81 1 101018 08909,0 125 81 1 101017 0900 1 101018 09009,1 125 81 1 101018 09109,2 125 81 1 101018 09209,3 125 81 1 101018 09309,4 125 81 1 101018 09409,5 125 81 1 101017 0950 1 101018 09509,6 133 87 1 101018 09609,7 133 87 1 101018 09709,8 133 87 1 101018 09809,9 133 87 1 101018 099010,0 133 87 1 101017 1000 1 101018 100010,2 133 87 1 101018 102010,5 133 87 1 101017 1050 1 101018 105011,0 142 94 1 101017 1100 1 101018 110011,5 142 94 1 101018 115011,8 142 94 1 101018 118012,0 151 101 1 101017 1200 1 101018 120012,5 151 101 1 101017 125013,0 151 101 1 101017 1300 1 101018 130013,5 160 108 1 101017 135014,0 160 108 1 101017 14001104 1104steel hardened steel stainless steel cast ironTitanium Superalloys Fe/NiCo-based Aluminium Copper Graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/Thermoset<strong>Drilling</strong>All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-11


Twist drill HSS 135°<strong>Drilling</strong>• <strong>Drilling</strong> without accurate centring• DIN 338• Shank version: cylindrical• S°= point angle 135°• Cutting material HSS/Co8 vap.D h8mmLmmL1mm art.no.1,0 34 12 10 101016 01001,1 36 14 10 101016 01101,2 38 16 10 101016 01201,3 38 16 10 101016 01301,4 40 18 10 101016 01401,5 40 18 10 101016 01501,6 43 20 10 101016 01601,7 43 20 10 101016 01701,8 46 22 10 101016 01801,9 46 22 10 101016 01902,0 49 24 10 101016 02002,1 49 24 10 101016 02102,2 53 27 10 101016 02202,3 53 27 10 101016 02302,4 57 30 10 101016 02402,5 57 30 10 101016 02502,6 57 30 10 101016 02602,7 61 33 10 101016 02702,8 61 33 10 101016 02802,9 61 33 10 101016 02903,0 61 33 10 101016 03003,1 65 36 10 101016 03103,2 65 36 10 101016 03203,3 65 36 10 101016 03303,4 70 39 10 101016 03403,5 70 39 10 101016 03503,6 70 39 10 101016 03603,7 70 39 10 101016 03703,8 75 43 10 101016 03803,9 75 43 10 101016 03904,0 75 43 10 101016 04004,1 75 43 10 101016 04104,2 75 43 10 101016 04204,3 80 47 10 101016 04301104very well suitedwell suitedmaterialD h8mmLmmL1mm art.no.4,4 80 47 10 101016 04404,5 80 47 10 101016 04504,6 80 47 10 101016 04604,7 80 47 10 101016 04704,8 86 52 10 101016 04804,9 86 52 10 101016 04905,0 86 52 10 101016 05005,1 86 52 10 101016 05105,2 86 52 10 101016 05205,3 86 52 10 101016 05305,4 93 57 10 101016 05405,5 93 57 10 101016 05505,6 93 57 10 101016 05605,7 93 57 10 101016 05705,8 93 57 10 101016 05805,9 93 57 10 101016 05906,0 93 57 10 101016 06006,1 101 63 1 101016 06106,2 101 63 1 101016 06206,3 101 63 1 101016 06306,4 101 63 1 101016 06406,5 101 63 1 101016 06506,6 101 63 1 101016 06606,7 101 63 1 101016 06706,8 109 69 1 101016 06806,9 109 69 1 101016 06907,0 109 69 1 101016 07007,1 109 69 1 101016 07107,2 109 69 1 101016 07207,3 109 69 1 101016 07307,4 109 69 1 101016 07407,5 109 69 1 101016 07507,6 117 75 1 101016 07607,7 117 75 1 101016 07701104D h8mmLmmL1mm art.no.7,8 117 75 1 101016 07807,9 117 75 1 101016 07908,0 117 75 1 101016 08008,1 117 75 1 101016 08108,2 117 75 1 101016 08208,3 117 75 1 101016 08308,4 117 75 1 101016 08408,5 117 75 1 101016 08508,6 125 81 1 101016 08608,7 125 81 1 101016 08708,8 125 81 1 101016 08808,9 125 81 1 101016 08909,0 125 81 1 101016 09009,1 125 81 1 101016 09109,2 125 81 1 101016 09209,3 125 81 1 101016 09309,4 125 81 1 101016 09409,5 125 81 1 101016 09509,6 133 87 1 101016 09609,7 133 87 1 101016 09709,8 133 87 1 101016 09809,9 133 87 1 101016 099010,0 133 87 1 101016 100010,1 133 87 1 101016 101010,2 133 87 1 101016 102010,5 133 87 1 101016 105011,0 142 94 1 101016 110011,5 142 94 1 101016 115011,8 142 94 1 101016 118012,0 151 101 1 101016 120012,5 151 101 1 101016 125013,0 151 101 1 101016 13001104steel hardened steel stainless steel cast ironTitanium Superalloys Fe/NiCo-based Aluminium Copper Graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/Thermosetwww.atorn.deHigh quality for great performance.Solid carbide high-performance twist drills by ATORN:• solid carbide Ultra-finest grit• longest service life• innovative centring geometry• internal coolant flew• precision-ground for safest machiningThis is but one example of ATORN‘s high-quality drilling <strong>tools</strong>.10-12


Twist drill solid carbide 118°• DIN 338• S°= point angle 118°• Cutting material solid carbide,solid carbide TiN,solid carbide TiAlN<strong>Drilling</strong>D h8mmLmmL1mmSolid carbide, uncoatedart.no.VHM TiNart.no.VHM TiAlNart.no.1,0 34 12 111010 0100 111011 0100 111012 01001,1 36 14 111010 0110 111012 01101,2 38 16 111010 0120 111012 01201,3 38 16 111010 0130 111012 01301,4 40 18 111010 0140 111012 01401,5 40 18 111010 0150 111011 0150 111012 01501,6 43 20 111010 0160 111012 01601,7 43 20 111010 0170 111012 01701,8 46 22 111010 0180 111012 01801,9 46 22 111010 0190 111012 01902,0 49 24 111010 0200 111011 0200 111012 02002,1 49 24 111010 0210 111012 02102,2 53 27 111010 0220 111012 02202,3 53 27 111010 0230 111012 02302,4 57 30 111010 0240 111012 02402,5 57 30 111010 0250 111011 0250 111012 02502,6 57 30 111010 0260 111012 02602,7 61 33 111010 0270 111012 02702,8 61 33 111010 0280 111011 0280 111012 02802,9 61 33 111010 0290 111012 02903,0 61 33 111010 0300 111011 0300 111012 03003,1 65 36 111010 0310 111012 03103,2 65 36 111010 0320 111012 03203,3 65 36 111010 0330 111011 0330 111012 03303,4 70 39 111010 0340 111012 03403,5 70 39 111010 0350 111011 0350 111012 03503,6 70 39 111010 0360 111012 03603,7 70 39 111010 0370 111012 03703,8 75 43 111010 0380 111011 0380 111012 03803,9 75 43 111010 0390 111012 03904,0 75 43 111010 0400 111011 0400 111012 04004,1 75 43 111010 0410 111012 04104,2 75 43 111010 0420 111011 0420 111012 04204,3 80 47 111010 0430 111012 04304,4 80 47 111010 0440 111012 04404,5 80 47 111010 0450 111011 0450 111012 04504,6 80 47 111010 0460 111012 04604,7 80 47 111010 0470 111012 04704,8 86 52 111010 0480 111011 0480 111012 04804,9 86 52 111010 0490 111012 04905,0 86 52 111010 0500 111011 0500 111012 05005,1 86 52 111010 0510 111012 05105,2 86 52 111010 0520 111012 05205,3 86 52 111010 0530 111012 05305,4 93 57 111010 0540 111012 05405,5 93 57 111010 0550 111011 0550 111012 05505,6 93 57 111010 0560 111012 05605,7 93 57 111010 0570 111012 05705,8 93 57 111010 0580 111011 0580 111012 05801110 1110 1110very well suitedwell suitedSolid carbide, uncoatedVHM TiNVHM TiAlNmaterialD h8mmLmmL1mmSolid carbide, uncoatedart.no.VHM TiNart.no.VHM TiAlNart.no.5,9 93 57 111010 0590 111012 05906,0 93 57 111010 0600 111011 0600 111012 06006,1 101 63 111010 0610 111012 06106,2 101 63 111010 0620 111012 06206,3 101 63 111010 0630 111012 06306,4 101 63 111010 0640 111012 06406,5 101 63 111010 0650 111011 0650 111012 06506,6 101 63 111010 0660 111012 06606,7 101 63 111010 0670 111012 06706,8 109 69 111010 0680 111011 0680 111012 06806,9 109 69 111010 0690 111012 06907,0 109 69 111010 0700 111011 0700 111012 07007,1 109 69 111010 0710 111012 07107,2 109 69 111010 0720 111012 07207,3 109 69 111010 0730 111012 07307,4 109 69 111010 0740 111012 07407,5 109 69 111010 0750 111011 0750 111012 07507,6 117 75 111010 0760 111012 07607,7 117 75 111010 0770 111012 07707,8 117 75 111010 0780 111012 07807,9 117 75 111010 0790 111012 07908,0 117 75 111010 0800 111011 0800 111012 08008,1 117 75 111010 0810 111012 08108,2 117 75 111010 0820 111012 08208,3 117 75 111010 0830 111012 08308,4 117 75 111010 0840 111012 08408,5 117 75 111010 0850 111011 0850 111012 08508,6 125 81 111010 0860 111012 08608,7 125 81 111010 0870 111012 08708,8 125 81 111010 0880 111012 08808,9 125 81 111010 0890 111012 08909,0 125 81 111010 0900 111011 0900 111012 09009,1 125 81 111010 0910 111012 09109,2 125 81 111010 0920 111012 09209,3 125 81 111010 0930 111012 09309,4 125 81 111010 0940 111012 09409,5 125 81 111010 0950 111011 0950 111012 09509,6 133 87 111010 0960 111012 09609,7 133 87 111010 0970 111012 09709,8 133 87 111010 0980 111012 09809,9 133 87 111010 0990 111012 099010,0 133 87 111010 1000 111011 1000 111012 100010,2 133 87 111010 1020 111011 1020 111012 102010,5 133 87 111010 1050 111011 1050 111012 105011,0 142 94 111010 1100 111012 110011,5 142 94 111010 1150 111012 115012,0 151 101 111010 1200 111011 1200 111012 120013,0 151 108 111010 1300 111012 13001110 1110 1110steel hardened steel stainless steel cast ironTitanium Superalloys Fe/NiCo-based Aluminium Copper Graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/ThermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-13


Twist drill sets DIN338 type N<strong>Drilling</strong>• Kits in cartridges• Shank version: cylindrical• S°= point angle 130°• conical jacket bevel• Ø tolerance h8• Cutting material HSS, HSS/Co5• 101035.... Profi le ground, from Ø 2.3 mm vaporised, point thinning from Ø >1 mm• Especially suited for mounting work since the twist drills do not get mixed up when the cartridge is closedDmmNumber of drillsHSS Roll-milledart.no.HSS Bare surfaceart.no.HSS Profile groundart.no.HSS/Co5 Profile groundart.no.Empty cartridgeart.no.1.0 Up to 5.9 mm Ø - increasing by 0.1 mm 50 101030 0001 101033 0001 101035 0001 101036 0001 101039 00016.0 Up to 10.0 mm Ø - increasing by 0.1 mm 41 101030 0002 101033 0002 101035 0002 101036 0002 101039 00021.0 Up to 10.0 mm Ø - increasing by 0.5 mm 19 101030 0003 101033 0003 101035 0003 101036 0003 101039 00031.0 Up to 13.0 mm Ø - increasing by 0.5 mm 25 101030 0004 101033 0004 101035 0004 101036 0004 101039 00041.0 Up to 10.5 mm Ø - increasing by 0.5 mm with the following additional24 101033 0005 101035 0005 101036 0005 101039 0005dimensions for threaded holes: 3.3 - 4.2 - 6.8 - 10.2 mm Ø1104 1104 1104 1104 1104very well suitedsteel hardened steel stainless steel cast ironTitanium Superalloys Fe/NiCo-based Aluminium Copper Graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/ThermosetHSS Roll-milledHSS/Co5 Profi le groundmaterialTwist drill DIN1897 Type NS°= point angle 118° or 130° (self-centring)shank design: StraightCutting material HSS vap. ,HSS/Co5 vap.HSS Point angle 118°HSS/Co5 point angle 130°D h8mmLmmL1mmHSS vap. 118°art.no.HSS/Co5 vap. 130°art.no.1,00 26 6 10 101050 0100 10 101055 01001,10 28 7 10 101050 0110 10 101055 01101,20 30 8 10 101050 0120 10 101055 01201,30 30 8 10 101050 0130 10 101055 01301,40 32 9 10 101050 0140 10 101055 01401,50 32 9 10 101050 0150 10 101055 01501,60 34 10 10 101050 0160 10 101055 01601,70 34 10 10 101050 0170 10 101055 01701,80 36 11 10 101050 0180 10 101055 01801,90 36 11 10 101050 0190 10 101055 01902,00 38 12 10 101050 0200 10 101055 02002,10 38 12 10 101055 02102,20 40 13 10 101050 0220 10 101055 02202,30 40 13 10 101050 0230 10 101055 02302,40 43 14 10 101050 0240 10 101055 02402,50 43 14 10 101050 0250 10 101055 02502,60 43 14 10 101050 0260 10 101055 02602,70 46 16 10 101050 0270 10 101055 02702,80 46 16 10 101050 0280 10 101055 02802,90 46 16 10 101050 0290 10 101055 02903,00 46 16 10 101050 0300 10 101055 03003,10 49 18 10 101050 0310 10 101055 03103,20 49 18 10 101050 0320 10 101055 03203,30 49 18 10 101050 0330 10 101055 03303,40 52 20 10 101050 0340 10 101055 03403,50 52 20 10 101050 0350 10 101055 03503,60 52 20 10 101050 0360 10 101055 03603,70 52 20 10 101050 0370 10 101055 03703,80 55 22 10 101050 0380 10 101055 03803,90 55 22 10 101050 0390 10 101055 03901104 110410-14D h8mmLmmL1mmHSS vap. 118°art.no.HSS/Co5 vap. 130°art.no.4,00 55 22 10 101050 0400 10 101055 04004,10 55 22 10 101050 0410 10 101055 04104,20 55 22 10 101050 0420 10 101055 04204,30 58 24 10 101050 0430 10 101055 04304,40 58 24 10 101050 0440 10 101055 04404,50 58 24 10 101050 0450 10 101055 04504,60 58 24 10 101050 0460 10 101055 04604,65 58 24 1 101050 14654,70 58 24 10 101055 04704,80 62 26 10 101050 0480 10 101055 04804,90 62 26 10 101050 0490 10 101055 04905,00 62 26 10 101050 0500 10 101055 05005,10 62 26 10 101050 0510 10 101055 05105,20 62 26 10 101050 0520 10 101055 05205,30 62 26 10 101050 0530 10 101055 05305,40 66 28 10 101050 0540 10 101055 05405,50 66 28 10 101050 0550 10 101055 05505,55 66 28 1 101050 15555,60 66 28 10 101050 0560 10 101055 05605,70 66 28 10 101050 0570 10 101055 05705,80 66 28 10 101050 0580 10 101055 05805,90 66 28 10 101050 0590 10 101055 05906,00 66 28 1 101050 0600 10 101055 06006,10 70 31 1 101050 0610 1 101055 06106,20 70 31 1 101050 0620 1 101055 06206,30 70 31 1 101050 0630 1 101055 06306,40 70 31 1 101050 0640 1 101055 06406,50 70 31 1 101050 0650 1 101055 06506,60 70 31 1 101050 0660 1 101055 06606,70 70 31 1 101050 0670 1 101055 06701104 1104


materialD h8mmLmmvery well suitedwell suitedHSS vap. 118°HSS/Co5 vap. 130°L1mmHSS vap. 118°art.no.HSS/Co5 vap. 130°art.no.6,80 74 34 1 101050 0680 1 101055 06806,90 74 34 1 101050 0690 1 101055 06907,00 74 34 1 101050 0700 1 101055 07007,10 74 34 1 101050 0710 1 101055 07107,20 74 34 1 101050 0720 1 101055 07207,30 74 34 1 101050 0730 1 101055 07307,40 74 34 1 101050 0740 1 101055 07407,45 74 34 1 101050 17457,50 74 34 1 101050 0750 1 101055 07507,60 79 37 1 101055 07607,70 79 37 1 101050 0770 1 101055 07707,80 79 37 1 101050 0780 1 101055 07807,90 79 37 1 101050 0790 1 101055 07908,00 79 37 1 101050 0800 1 101055 08008,10 79 37 1 101050 0810 1 101055 08108,20 79 37 1 101050 0820 1 101055 08208,30 79 37 1 101050 0830 1 101055 08308,40 79 37 1 101050 0840 1 101055 08408,50 79 37 1 101050 0850 1 101055 08508,60 84 40 1 101050 0860 1 101055 08608,70 84 40 1 101050 0870 1 101055 08708,80 84 40 1 101050 0880 1 101055 08808,90 84 40 1 101050 0890 1 101055 08909,00 84 40 1 101050 0900 1 101055 09009,10 84 40 1 101050 0910 1 101055 09109,20 84 40 1 101050 0920 1 101055 09209,30 84 40 1 101050 0930 1 101055 09309,40 84 40 1 101050 0940 1 101055 09409,50 84 40 1 101050 0950 1 101055 09509,60 89 43 1 101050 0960 1 101055 09609,70 89 43 1 101050 0970 1 101055 09709,80 89 43 1 101050 0980 1 101055 09809,90 89 43 1 101055 099010,00 89 43 1 101050 1000 1 101055 10001104 1104D h8mmsteel hardened steel stainless steel cast ironTitanium Superalloys Fe/NiCo-based Aluminium Copper Graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/ThermosetLmmL1mmHSS vap. 118°art.no.HSS/Co5 vap. 130°art.no.10,20 89 43 1 101050 1020 1 101055 102010,50 89 43 1 101050 1050 1 101055 105011,00 95 47 1 101050 1100 1 101055 110011,50 95 47 1 101050 1150 1 101055 115011,80 95 47 1 101050 118012,00 102 51 1 101050 1200 1 101055 120012,50 102 51 1 101050 1250 1 101055 125013,00 102 51 1 101050 1300 1 101055 130013,50 107 54 1 101050 135013,80 107 54 1 101050 1380 1 101055 138014,00 107 54 1 101050 1400 1 101055 140014,50 111 56 1 101050 1450 1 101055 145015,00 111 56 1 101050 1500 1 101055 150015,50 115 58 1 101050 1550 1 101055 155015,75 115 58 1 101050 157516,00 115 58 1 101050 1600 1 101055 160016,10 119 60 1 101050 161016,20 119 60 1 101050 162016,50 119 60 1 101050 1650 1 101055 165017,00 119 60 1 101050 1700 1 101055 170017,50 123 62 1 101050 1750 1 101055 175017,75 123 62 1 101050 177518,00 123 62 1 101050 1800 1 101055 180018,50 127 64 1 101050 1850 1 101055 185019,00 127 64 1 101050 1900 1 101055 190019,50 131 66 1 101050 1950 1 101055 195019,75 131 66 1 101050 197520,00 131 66 1 101050 2000 1 101055 200021,00 136 68 1 101050 210022,00 141 70 1 101050 220025,00 151 75 1 101050 250027,00 162 81 1 101050 270032,00 180 90 1 101050 32001104 1104<strong>Drilling</strong>Twist drill for Hardox machining• S°= point angle 135° (self-centring)• Shank version: cylindrical• Reduction of the cutting edge wear due to AlCr-coating• Cutting material HSS/Co5, X-AlCr-coated® – Registered trademark of SSABHardox ® 450D h8mmLmmL1mm art.no.2,0 38 12 115001 02002,5 43 14 115001 02503,0 46 16 115001 03003,3 49 18 115001 03303,5 52 20 115001 03504,0 55 22 115001 04004,2 55 22 115001 04204,5 58 24 115001 04505,0 62 26 115001 05005,5 66 28 115001 05501113All prices in euro, VAT excludedD h8mmLmmL1mm art.no.6,0 66 28 115001 06006,5 70 31 115001 06506,8 74 34 115001 06807,0 74 34 115001 07007,5 74 34 115001 07508,0 79 37 115001 08008,5 79 37 115001 08509,0 84 40 115001 09009,5 84 40 115001 095010,0 89 43 115001 10001113D h8mmLmmL1mm art.no.10,2 89 43 115001 102010,5 89 43 115001 105011,0 95 47 115001 110012,0 102 51 115001 120012,5 102 51 115001 125013,0 102 51 115001 130014,0 107 54 115001 140015,0 111 56 115001 150016,0 115 58 115001 160018,0 123 62 115001 18001113Prices in bold print = delivery ex stock10-15


Twist drill DIN1897 Type TLP<strong>Drilling</strong>• Shank version: cylindrical• S°= point angle 130° (self-centring)• Cutting material HSS Co5,HSS/Co5 TiNHSS/Co5 Type TLPHSS/Co TiND h8mmLmmL1mmHSS/Co5 Type TLPart.no.HSS/Co5 TiNart.no.1,00 26 6 10 101052 0100 10 101051 01001,10 28 7 10 101052 0110 10 101051 01101,20 30 8 10 101052 0120 10 101051 01201,30 30 8 10 101052 0130 10 101051 01301,40 32 9 10 101052 0140 10 101051 01401,50 32 9 10 101052 0150 10 101051 01501,60 34 10 10 101052 0160 10 101051 01601,70 34 10 10 101052 0170 10 101051 01701,80 36 11 10 101052 0180 10 101051 01801,90 36 11 10 101052 0190 10 101051 01902,00 38 12 10 101052 0200 10 101051 02002,10 38 12 10 101052 0210 10 101051 02102,20 40 13 10 101052 0220 10 101051 02202,30 40 13 10 101052 0230 10 101051 02302,40 43 14 10 101052 0240 10 101051 02402,50 43 14 10 101052 0250 10 101051 02502,60 43 14 10 101052 0260 10 101051 02602,70 46 16 10 101052 0270 10 101051 02702,80 46 16 10 101052 0280 10 101051 02802,90 46 16 10 101052 0290 10 101051 02903,00 46 16 10 101052 0300 10 101051 03003,10 49 18 10 101052 0310 10 101051 03103,20 49 18 10 101052 0320 10 101051 03203,30 49 18 10 101052 0330 10 101051 03303,40 52 20 10 101052 0340 10 101051 03403,50 52 20 10 101052 0350 10 101051 03503,60 52 20 10 101052 0360 10 101051 03603,70 52 20 10 101052 0370 10 101051 03703,80 55 22 10 101052 0380 10 101051 03803,90 55 22 10 101052 0390 10 101051 03904,00 55 22 10 101052 0400 10 101051 04004,10 55 22 10 101052 0410 10 101051 04104,20 55 22 10 101052 0420 10 101051 04204,30 58 24 10 101052 0430 10 101051 04304,40 58 24 10 101052 0440 10 101051 04404,50 58 24 10 101052 0450 10 101051 04504,60 58 24 10 101052 0460 10 101051 04604,70 58 24 10 101052 0470 10 101051 04704,80 62 26 10 101052 0480 10 101051 04804,90 62 26 10 101052 0490 10 101051 04905,00 62 26 10 101052 0500 10 101051 05005,10 62 26 10 101052 0510 10 101051 05105,20 62 26 10 101052 0520 10 101051 05205,30 62 26 10 101052 0530 10 101051 05305,40 66 28 10 101052 0540 10 101051 05405,50 66 28 10 101052 0550 10 101051 05505,60 66 28 10 101052 0560 10 101051 05605,70 66 28 10 101052 0570 10 101051 05705,80 66 28 10 101052 0580 10 101051 05805,90 66 28 10 101052 0590 10 101051 05906,00 66 28 10 101052 0600 10 101051 06006,10 70 31 1 101052 0610 1 101051 06106,20 70 31 1 101052 06206,30 70 31 1 101052 0630 1 101051 06306,40 70 31 1 101052 0640 1 101051 06401104 1104very well suitedwell suitedHSS/Co5 Type TLPHSS/Co5 TiNmaterial10-16D h8mmLmmL1mmHSS/Co5 Type TLPart.no.HSS/Co5 TiNart.no.6,50 70 31 1 101052 0650 1 101051 06506,60 70 31 1 101052 0660 1 101051 06606,70 70 31 1 101052 0670 1 101051 06706,80 74 34 1 101052 0680 1 101051 06806,90 74 34 1 101052 0690 1 101051 06907,00 74 34 1 101052 0700 1 101051 07007,10 74 34 1 101052 0710 1 101051 07107,20 74 34 1 101052 0720 1 101051 07207,30 74 34 1 101052 0730 1 101051 07307,40 74 34 1 101052 0740 1 101051 07407,50 74 34 1 101052 0750 1 101051 07507,60 79 37 1 101052 0760 1 101051 07607,70 79 37 1 101052 0770 1 101051 07707,80 79 37 1 101052 0780 1 101051 07807,90 79 37 1 101052 0790 1 101051 07908,00 79 37 1 101052 0800 1 101051 08008,10 79 37 1 101052 0810 1 101051 08108,20 79 37 1 101052 0820 1 101051 08208,30 79 37 1 101052 0830 1 101051 08308,40 79 37 1 101052 0840 1 101051 08408,50 79 37 1 101052 0850 1 101051 08508,60 84 40 1 101052 0860 1 101051 08608,70 84 40 1 101052 0870 1 101051 08708,80 84 40 1 101052 0880 1 101051 08808,90 84 40 1 101052 0890 1 101051 08909,00 84 40 1 101052 0900 1 101051 09009,10 84 40 1 101052 0910 1 101051 09109,20 84 40 1 101052 0920 1 101051 09209,30 84 40 1 101052 0930 1 101051 09309,40 84 40 1 101052 0940 1 101051 09409,50 84 40 1 101052 0950 1 101051 09509,60 89 43 1 101052 0960 1 101051 09609,70 89 43 1 101052 0970 1 101051 09709,80 89 43 1 101052 0980 1 101051 09809,90 89 43 1 101052 0990 1 101051 099010,00 89 43 1 101052 1000 1 101051 100010,20 89 43 1 101052 1020 1 101051 102010,50 89 43 1 101052 1050 1 101051 105011,00 95 47 1 101052 1100 1 101051 110011,50 95 47 1 101052 1150 1 101051 115011,80 95 47 1 101052 118012,00 102 51 1 101052 1200 1 101051 120012,50 102 51 1 101052 1250 1 101051 125013,00 102 51 1 101052 1300 1 101051 130013,50 107 54 1 101052 1350 1 101051 135014,00 107 54 1 101052 1400 1 101051 140014,50 111 56 1 101052 1450 1 101051 145015,00 111 56 1 101052 1500 1 101051 150015,50 115 58 1 101052 1550 1 101051 155015,75 115 58 1 101051 157516,00 115 58 1 101052 1600 1 101051 160016,50 119 60 1 101052 1650 1 101051 165017,00 119 60 1 101052 1700 1 101051 170017,50 123 62 1 101052 1750 1 101051 175017,75 123 62 1 101051 17751104 1104Superalloys Fe/NiCo-based Aluminium Copper Graphitealloyssteel hardened steel stainless steel cast ironTitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/Thermoset


Twist drill HSS DIN1869 TLP• DIN 1869• Shank version: cylindrical• S°= point angle 130°• Cutting material HSSD h8mmLmmL1mmSeriesart.no.2,0 125 85 1 101070 00362,5 140 95 1 101070 00373,0 150 100 1 101070 00013,0 190 130 2 101070 00023,5 165 115 1 101070 00033,5 210 145 2 101070 00044,0 175 120 1 101070 00054,0 220 150 2 101070 00064,0 280 190 3 101070 00074,5 185 125 1 101070 00084,5 235 160 2 101070 00095,0 195 135 1 101070 00101104very well suitedwell suitedmaterialD h8mmLmmL1mmSeriesart.no.5,0 245 170 2 101070 00115,0 315 210 3 101070 00125,5 205 140 1 101070 00135,5 260 180 2 101070 00146,0 205 140 1 101070 00156,0 260 180 2 101070 00166,0 330 225 3 101070 00176,5 215 150 1 101070 00396,5 275 190 2 101070 00186,8 225 155 1 101070 00197,0 225 155 1 101070 00207,0 290 200 2 101070 00211104D h8mmLmmL1mmSeriesart.no.7,5 225 155 1 101070 00227,5 290 200 2 101070 00238,0 240 165 1 101070 00248,0 305 210 2 101070 00258,0 390 265 3 101070 00268,5 240 165 1 101070 00278,5 305 210 2 101070 00289,0 250 175 1 101070 00299,0 320 220 2 101070 003010,0 265 185 1 101070 003210,0 340 235 2 101070 003310,0 430 295 3 101070 00341104Superalloys Fe/NiCo-based Aluminium Copper Graphitesteel hardened steel stainless steel cast ironTitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/Thermoset<strong>Drilling</strong>Miniature twist drill• DIN 1899• Shank version: cylindrical• S°= point angle 118°• Cutting material HSS-E-PMfrom Ø 0.05 mmD h8mmLmmL1mmD1mm art.no.0,05 25 0,4 1,0 10 101075 00050,08 25 0,5 1,0 10 101075 00080,10 25 0,7 1,0 10 101075 00100,15 25 1,0 1,0 10 101075 00150,20 25 1,8 1,0 10 101075 00200,25 25 2,2 1,0 10 101075 00250,30 25 2,2 1,0 10 101075 00300,35 25 2,8 1,0 10 101075 00350,40 25 3,6 1,0 10 101075 00400,45 25 3,6 1,0 10 101075 00450,50 25 4,0 1,0 10 101075 0050very well suited1104well suitedmaterialD h8mmLmmL1mmD1mm art.no.0,55 25 4,5 1,0 10 101075 00550,60 25 4,5 1,0 10 101075 00600,65 25 5,0 1,0 10 101075 00650,70 25 5,6 1,0 10 101075 00700,75 25 5,6 1,0 10 101075 00750,80 25 6,3 1,0 10 101075 00800,85 25 6,3 1,5 10 101075 00850,90 25 7,1 1,5 10 101075 00900,95 25 7,1 1,5 10 101075 00951,00 25 8,0 1,5 10 101075 01001,10 25 9,0 1,5 10 101075 01101104D h8mmLmmL1mmD1mm art.no.1,15 25 7,6 1,5 10 101075 01151,20 25 10,0 1,5 10 101075 01201,25 25 8,5 1,5 10 101075 01251,30 25 10,0 1,5 10 101075 01301,40 25 11,2 1,5 10 101075 01401,45 25 9,5 1,5 10 101075 01451,50 25 12,5 1,5 10 101075 01501,65 30 10.6 2 10 101075 01651,85 30 11,8 2 10 101075 0185steel hardened steel stainless steel cast ironTitanium Superalloys Fe/NiCo-based Aluminium 1104 Copper Graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/ThermosetTwist drill HSS WN 118°, offset shank• Company standard• Shank version: cylindrical• S°= point angle 118°• Cutting material HSS vap.D h8mmLmmL1mmD1mm art.no.13,5 152 76 12,7 101080 135014,0 152 76 12,7 101080 140014,5 152 76 12,7 101080 145015,0 152 76 12,7 101080 150015,5 152 76 12,7 101080 155016,0 152 76 12,7 101080 160016,5 152 76 12,7 101080 16501104very well suitedwell suitedmaterialD h8mmLmmL1mmD1mm art.no.17,0 152 76 12,7 101080 170017,5 152 76 12,7 101080 175018,0 152 76 12,7 101080 180018,5 152 76 12,7 101080 185019,0 152 76 12,7 101080 190019,5 152 76 12,7 101080 195020,0 152 76 12,7 101080 20001104with offset shankD h8mmLmmL1mmD1mm art.no.21,0 152 76 12,7 101080 210022,0 152 76 12,7 101080 220023,0 152 76 12,7 101080 230024,0 152 76 12,7 101080 240025,0 152 76 12,7 101080 25001104steel hardened steel stainless steel cast ironTitanium Superalloys Fe/NiCo-based Aluminium Copper Graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/ThermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-17


Pin hole drill HSS DIN1898A 118°<strong>Drilling</strong>• Cutting edges with conical gradient and chip-breaking fl utes• Used to drill conical drill holes 1:50 for taper pins in compliancewith ISO 2339 (DIN 1) and ISO 8736 (DIN 7978) in one work step.• Important: drill using a low feed rate• Cutting material HSS• further sizes available on requestmaterialDmmD min.mmD max.mmLmmL1mmD1 e9mm art.no.1,5 1,4 2,08 64 34 2,00 101025 01502,0 1,9 2,86 86 48 3,15 101025 02002,5 2,4 3,36 86 48 3,15 101025 02503,0 2,9 4,06 100 58 4,00 101025 03004,0 3,9 5,26 112 68 5,00 101025 04001104very well suitedwell suitedDmmD min.mmD max.mmLmmL1mmD1 e9mm art.no.5,0 4,9 6,36 122 73 6,30 101025 05006,0 5,9 8,00 160 105 8,00 101025 06008,0 7,9 10,80 207 145 10,00 101025 080010,0 9,9 13,40 245 175 12,50 101025 100012,0 11,8 16,00 290 210 16,00 101025 12001104Superalloys Fe/NiCo-based Aluminium Copper Graphitealloyssteel hardened steel stainless steel cast ironTitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/Thermosetwww.atorn.deHigh quality for great performance.Solid carbide high-performance twist drills by ATORN:• solid carbide Ultra-finest grit• longest service life• innovative centring geometry• internal coolant flow• precision-ground for safest machiningThis is but one example of ATORN‘s high-quality drilling <strong>tools</strong>.10-18


Twist drill solid carbide DIN6539N• DIN 6539• Shank version: cylindrical• S°= point angle 118°• Cutting material solid carbide,solid carbide TiN,solid carbide TiAINSolid carbide, uncoatedVHM TiN<strong>Drilling</strong>VHM TiAlND h8mmLmmL1mmSolid carbide, uncoatedart.no.VHM TiNart.no.VHM TiAlNart.no.0,50 20 3 111005 0005 111009 00050,60 21 3,5 111005 0006 111009 00060,70 23 4,5 111005 0007 111009 00070,80 24 5 111005 0008 111009 00080,90 25 5,5 111005 0009 111009 00091,00 26 6 111005 0010 111008 0010 111009 00101,10 28 7 111005 0011 111009 00111,20 30 8 111005 0012 111009 00121,30 30 8 111005 0013 111009 00131,40 32 9 111005 0014 111009 00141,50 32 9 111005 0015 111008 0015 111009 00151,60 34 10 111005 0016 111008 0016 111009 00161,70 34 10 111005 0017 111009 00171,80 36 11 111005 0018 111008 0018 111009 00181,90 36 11 111005 0019 111009 00192,00 38 12 111005 0020 111008 0020 111009 00202,10 38 12 111005 0021 111009 00212,20 40 13 111005 0022 111009 00222,30 40 13 111005 0023 111009 00232,40 43 14 111005 0024 111009 00242,50 43 14 111005 0025 111008 0025 111009 00252,60 43 14 111005 0026 111009 00262,70 46 16 111005 0027 111009 00272,80 46 16 111005 0028 111008 0028 111009 00282,90 46 16 111005 0029 111009 00293,00 46 16 111005 0030 111008 0030 111009 00303,10 49 18 111005 0031 111009 00313,20 49 18 111005 0032 111009 00323,30 49 18 111005 0033 111008 0033 111009 00333,40 52 20 111005 0034 111009 00343,50 52 20 111005 0035 111008 0035 111009 00353,60 52 20 111005 0036 111009 00363,70 52 20 111005 0037 111009 00373,80 55 22 111005 0038 111008 0038 111009 00383,90 55 22 111005 0039 111009 00394,00 55 22 111005 0040 111008 0040 111009 00404,10 55 22 111005 0041 111009 00414,20 55 22 111005 0042 111008 0042 111009 00424,30 58 24 111005 0043 111009 00434,40 58 24 111005 0044 111009 00444,50 58 24 111005 0045 111008 0045 111009 00454,60 58 24 111005 0046 111009 00464,70 58 24 111005 0047 111009 00474,80 62 26 111005 0048 111008 0048 111009 00484,90 62 26 111005 0049 111009 00495,00 62 26 111005 0050 111008 0050 111009 00505,10 62 26 111005 0051 111009 00515,20 62 26 111005 0052 111009 00525,30 62 26 111005 0053 111009 00535,40 66 28 111005 0054 111009 00545,50 66 28 111005 0055 111008 0055 111009 00555,60 66 28 111005 0056 111009 00565,70 66 28 111005 0057 111009 00575,80 66 28 111005 0058 111009 00581110 1110 1110very well suitedwell suitedSolid carbide, uncoatedVHM TiNVHM TiAlNmaterialD h8mmLmmL1mmSolid carbide, uncoatedart.no.VHM TiNart.no.VHM TiAlNart.no.5,90 66 28 111005 0059 111009 00596,00 66 28 111005 0060 111008 0060 111009 00606,10 70 31 111005 0061 111009 00616,20 70 31 111005 0062 111009 00626,30 70 31 111005 0063 111009 00636,40 70 31 111005 0064 111009 00646,50 70 31 111005 0065 111008 0065 111009 00656,60 70 31 111005 0066 111009 00666,70 70 31 111005 0067 111009 00676,80 74 34 111005 0068 111008 0068 111009 00686,90 74 34 111005 0069 111009 00697,00 74 34 111005 0070 111008 0070 111009 00707,10 74 34 111005 0071 111009 00717,20 74 34 111005 0072 111009 00727,30 74 34 111005 0073 111009 00737,40 74 34 111005 0074 111009 00747,50 74 34 111005 0075 111008 00757,60 79 37 111005 0076 111009 00767,70 79 37 111005 0077 111009 00777,80 79 37 111005 0078 111009 00787,90 79 37 111005 0079 111009 00798,00 79 37 111005 0080 111008 0080 111009 00808,10 79 37 111005 0081 111009 00818,20 79 37 111005 0082 111009 00828,30 79 37 111005 0083 111009 00838,40 79 37 111005 0084 111009 00848,50 79 37 111005 0085 111008 0085 111009 00858,60 84 40 111005 0086 111009 00868,70 84 40 111005 0087 111009 00878,80 84 40 111005 0088 111009 00888,90 84 40 111005 0089 111009 00899,00 84 40 111005 0090 111008 0090 111009 00909,10 84 40 111005 0091 111009 00919,20 84 40 111005 0092 111009 00929,30 84 40 111005 0093 111009 00939,40 84 40 111005 0094 111009 00949,50 84 40 111005 0095 111008 0095 111009 00959,60 89 43 111005 0096 111009 00969,70 89 43 111005 0097 111009 00979,80 89 43 111005 0098 111009 00989,90 89 43 111005 0099 111009 009910,00 89 43 111005 0100 111008 0100 111009 010010,20 89 43 111005 0102 111008 0102 111009 010210,50 89 43 111005 0105 111008 0105 111009 010511,00 95 47 111005 0110 111008 0110 111009 011011,20 95 47 111005 0112 111009 011211,50 95 47 111005 0115 111008 0115 111009 011512,00 102 51 111005 0120 111008 0120 111009 012012,50 102 51 111005 012513,00 102 51 111005 0130 111008 0130 111009 013014,00 107 54 111005 0140 111008 0140 111009 014015,00 111 56 111005 0150 111008 0150 111009 015016,00 115 58 111005 0160 111008 0160 111009 01601110 1110 1110steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-19


3-edged drill<strong>Drilling</strong>• Company standard• 3 cutting edges, with wider fl utes• Shank version: cylindrical• S°= point angle 150°• Cutting m aterial solid c arbide,solid carbide/TiNuncoatedTiN-coatedmaterialD h8mmLmmL1mmSolid carbide, uncoatedart.no.Solid carbide TiN-coatedart.no.3,0 46 22 111013 0030 111014 00303,2 49 24 111013 0032 111014 00323,3 49 24 111013 0033 111014 00333,5 52 27 111013 0035 111014 00353,8 55 30 111013 0038 111014 00384,0 55 30 111013 0040 111014 00404,2 55 30 111013 0042 111014 00424,5 58 32 111013 0045 111014 00454,8 62 35 111013 0048 111014 00485,0 62 35 111013 0050 111014 00505,5 66 39 111013 0055 111014 00555,8 66 39 111013 0058 111014 00586,0 66 39 111013 0060 111014 00606,5 70 42 111013 0065 111014 00656,8 74 45 111013 0068 111014 00687,0 74 45 111013 0070 111014 00701110 1110very well suitedwell suitedSolid carbide, uncoatedSolid carbide TiN-coatedD h8mmsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetLmmL1mmSolid carbide, uncoatedart.no.Solid carbide TiN-coatedart.no.7,5 74 45 111013 0075 111014 00757,8 79 48 111013 0078 111014 00788,0 79 48 111013 0080 111014 00808,5 79 48 111013 0085 111014 00859,0 84 52 111013 0090 111014 00909,5 84 52 111013 0095 111014 00959,8 89 55 111013 0098 111014 009810,0 89 55 111013 0100 111014 010010,2 89 55 111013 0102 111014 010210,5 89 55 111013 0105 111014 010511,0 95 60 111013 0110 111014 011012,0 102 65 111013 0120 111014 012013,0 102 65 111013 0130 111014 013014,0 107 66 111013 0140 111014 014015,0 111 70 111013 0150 111014 015016,0 115 73 111013 0160 111014 01601110 1110Twist drill HSS DIN340N 118°• DIN 340• Shank version: cylindrical• S°= point angle 118°• Cutting material HSS vap.D h8mmLmmL1mm art.no.0,60 35 15 10 101060 00600,80 46 29 10 101060 00801,00 56 33 10 101060 01001,10 60 37 10 101060 01101,20 65 41 10 101060 01201,25 65 41 10 101060 01251,30 65 41 10 101060 01301,40 70 45 10 101060 01401,50 70 45 10 101060 01501,60 76 50 10 101060 01601,70 76 50 10 101060 01701,80 80 53 10 101060 01801,90 80 53 10 101060 01902,00 85 56 10 101060 02002,10 85 56 10 101060 02102,20 90 59 10 101060 02202,30 90 59 10 101060 02302,40 95 62 10 101060 02402,50 95 62 10 101060 02502,60 95 62 10 101060 02602,70 100 66 10 101060 02702,80 100 66 10 101060 02802,90 100 66 10 101060 02903,00 100 66 10 101060 03003,10 106 69 10 101060 03103,20 106 69 10 101060 03203,30 106 69 10 101060 03303,40 112 73 10 101060 0340110410-20D h8mmLmmL1mm art.no.3,50 112 73 10 101060 03503,60 112 73 10 101060 03603,70 112 73 10 101060 03703,80 119 78 10 101060 03803,90 119 78 10 101060 03904,00 119 78 10 101060 04004,10 119 78 10 101060 04104,20 119 78 10 101060 04204,30 126 82 10 101060 04304,40 126 82 10 101060 04404,50 126 82 10 101060 04504,60 126 82 10 101060 04604,70 126 82 10 101060 04704,80 132 87 10 101060 04804,90 132 87 10 101060 04905,00 132 87 10 101060 05005,10 132 87 10 101060 05105,20 132 87 10 101060 05205,30 132 87 10 101060 05305,40 139 91 10 101060 05405,50 139 91 10 101060 05505,60 139 91 10 101060 05605,70 139 91 10 101060 05705,80 139 91 10 101060 05805,90 139 91 10 101060 05906,00 139 91 10 101060 06006,10 148 97 1 101060 06106,20 148 97 1 101060 06201104D h8mmLmmL1mm art.no.6,30 148 97 1 101060 06306,40 148 97 1 101060 06406,50 148 97 1 101060 06506,60 148 97 1 101060 06606,70 156 102 1 101060 06706,80 156 102 1 101060 06806,90 156 102 1 101060 06907,00 156 102 1 101060 07007,10 156 102 1 101060 07107,20 156 102 1 101060 07207,30 156 102 1 101060 07307,40 156 102 1 101060 07407,50 156 102 1 101060 07507,60 156 102 1 101060 07607,70 165 109 1 101060 07707,80 165 109 1 101060 07807,90 165 109 1 101060 07908,00 165 109 1 101060 08008,10 165 109 1 101060 08108,20 165 109 1 101060 08208,30 165 109 1 101060 08308,40 165 109 1 101060 08408,50 165 109 1 101060 08508,60 175 115 1 101060 08608,70 175 115 1 101060 08708,80 175 115 1 101060 08808,90 175 115 1 101060 08909,00 175 115 1 101060 09001104


D h8mmLmmL1mm art.no.9,10 175 115 1 101060 09109,20 175 115 1 101060 09209,30 175 115 1 101060 09309,40 175 115 1 101060 09409,50 175 115 1 101060 09509,60 184 121 1 101060 09609,70 184 121 1 101060 09709,80 184 121 1 101060 09801104D h8mmLmmL1mm art.no.9,90 184 121 1 101060 099010,00 184 121 1 101060 100010,20 184 121 1 101060 102010,25 184 121 1 101w060 102510,50 184 121 1 101060 105011,00 195 128 1 101060 110011,50 195 128 1 101060 115012,00 205 134 1 101060 12001104D h8mmLmmL1mm art.no.12,50 205 134 1 101060 125013,00 205 134 1 101060 130013,50 214 140 1 101060 135014,00 214 140 1 101060 140014,50 220 144 1 101060 145015,00 220 144 1 101060 150015,50 227 149 1 101060 155016,00 227 149 1 101060 16001104<strong>Drilling</strong>materialvery well suitedwell suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetTwist drill HSS/Co DIN340 130°• Shank version: cylindrical• S°= point angle 130°• Cutting material HSS TiN, HSS/Co5Deep-hole sectionINOXD h8mmLmmL1mmType TLP, HSS .TiN-coatedart.no. €Type VA, HSS/Co5art.no. €1,0 56,0 33,0 10 101061 0100 10 101062 01001,1 60,0 37,0 10 101061 0110 10 101062 01101,2 65,0 41,0 10 101061 0120 10 101062 01201,3 65,0 41,0 10 101061 0130 10 101062 01301,4 70,0 45,0 10 101061 0140 10 101062 01401,5 70,0 45,0 10 101061 0150 10 101062 01501,6 76,0 50,0 10 101061 0160 10 101062 01601,7 76,0 50,0 10 101061 0170 10 101062 01701,8 80,0 53,0 10 101061 0180 10 101062 01801,9 80,0 53,0 10 101061 0190 10 101062 01902,0 85,0 56,0 10 101061 0200 10 101062 02002,1 85,0 56,0 10 101061 0210 10 101062 02102,2 90,0 59,0 10 101061 0220 10 101062 02202,3 90,0 59,0 10 101061 0230 10 101062 02302,4 95,0 62,0 10 101061 0240 10 101062 02402,5 95,0 62,0 10 101061 0250 10 101062 02502,6 95,0 62,0 10 101061 0260 10 101062 02602,7 100,0 66,0 10 101061 0270 10 101062 02702,8 100,0 66,0 10 101061 0280 10 101062 02802,9 100,0 66,0 10 101061 0290 10 101062 02903,0 100,0 66,0 10 101061 0300 10 101062 03003,1 106,0 69,0 10 101061 0310 10 101062 03103,2 106,0 69,0 10 101061 0320 10 101062 03203,3 106,0 69,0 10 101061 0330 10 101062 03303,4 112,0 73,0 10 101061 0340 10 101062 03403,5 112,0 73,0 10 101061 0350 10 101062 03503,6 112,0 73,0 10 101061 0360 10 101062 03603,7 112,0 73,0 10 101061 0370 10 101062 03703,8 119,0 78,0 10 101061 0380 10 101062 03803,9 119,0 78,0 10 101061 0390 10 101062 03904,0 119,0 78,0 10 101061 0400 10 101062 04004,1 119,0 78,0 10 101061 0410 10 101062 04104,2 119,0 78,0 10 101061 0420 10 101062 04204,3 126,0 82,0 10 101061 0430 10 101062 04304,4 126,0 82,0 10 101061 0440 10 101062 04404,5 126,0 82,0 10 101061 0450 10 101062 04504,7 126,0 82,0 10 101061 0470 10 101062 04704,8 132,0 87,0 10 101061 0480 10 101062 04801104 1104very well suitedwell suitedType TLP, HSS .TiN-coatedType VA, HSS/Co5materialD h8mmLmmL1mmType TLP, HSS .TiN-coatedart.no. €Type VA, HSS/Co5art.no. €4,9 132,0 87,0 10 101061 0490 10 101062 04905,0 132,0 87,0 10 101061 0500 10 101062 05005,1 132,0 87,0 10 101061 0510 10 101062 05105,2 132,0 87,0 10 101061 0520 10 101062 05205,3 132,0 87,0 10 101061 0530 10 101062 05305,4 139,0 91,0 10 101061 0540 10 101062 05405,5 139,0 91,0 10 101061 0550 10 101062 05505,6 139,0 91,0 10 101061 0560 10 101062 05605,7 139,0 91,0 10 101061 0570 10 101062 05705,8 139,0 91,0 10 101061 0580 10 101062 05805,9 139,0 91,0 10 101061 0590 10 101062 05906,0 139,0 91,0 10 101061 0600 10 101062 06006,1 148,0 97,0 1 101061 0610 1 101062 06106,2 148,0 97,0 1 101061 0620 1 101062 06206,3 148,0 97,0 1 101061 0630 1 101062 06306,4 148,0 97,0 1 101061 0640 1 101062 06406,5 148,0 97,0 1 101061 0650 1 101062 06506,6 148,0 97,0 1 101061 0660 1 101062 06606,7 156,0 102,0 1 101061 0670 1 101062 06706,8 156,0 102,0 1 101061 0680 1 101062 06807,0 156,0 102,0 1 101061 0700 1 101062 07007,5 156,0 102,0 1 101061 0750 1 101062 07507,7 165,0 109,0 1 101062 07707,8 165,0 109,0 1 101062 07808,0 165,0 109,0 1 101061 0800 1 101062 08008,1 165,0 109,0 1 101062 08108,2 165,0 109,0 1 101062 08208,4 165,0 109,0 1 101062 08408,5 165,0 109,0 1 101061 0850 1 101062 08509,0 175,0 115,0 1 101061 0900 1 101062 09009,5 175,0 115,0 1 101061 0950 1 101062 09509,8 184,0 121,0 1 101062 098010,0 184,0 121,0 1 101061 1000 1 101062 100010,2 184,0 121,0 1 101061 1020 1 101062 102010,5 184,0 121,0 1 101061 1050 1 101062 105011,0 195,0 128,0 1 101061 1100 1 101062 110011,5 195,0 128,0 1 101061 1150 1 101062 115012,0 205,0 134,0 1 101061 1200 1 101062 12001104 1104superalloys Fe/NiCo-based aluminium copper graphitealloyssteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-21


Twist drill HSS, HSS/Co, vaporised DIN345N 118°<strong>Drilling</strong>• DIN 345• Shank version: MT• S°= point angle 118°• Cutting material HSS, HSS vap., HSS/Co5 vap.HSS, roll-milledHSS, vaporisedHSS/Co5, vaporisedD h8mmLmmL1mmShankdesignart.no.HSSHSS, vaporisedart.no.HSS/Co5, vaporisedart.no.5,00 133 52 MK 1 101505 00506,00 138 57 MK 1 101505 00607,00 150 69 MK 1 101505 00708,00 156 75 MK 1 101505 00808,50 156 75 MK 1 101505 00859,00 162 81 MK 1 101505 00909,50 162 81 MK 1 101505 009510,00 168 87 MK 1 101505 010010,20 168 87 MK 1 101505 010210,50 168 87 MK 1 101505 010511,00 175 94 MK 1 101505 011011,50 175 94 MK 1 101505 011511,75 175 94 MK 1 101505 011711,80 175 94 MK 1 101505 011812,00 182 101 MK 1 101501 0120 101505 0120 101507 012012,10 182 101 MK 1 101505 012112,20 182 101 MK 1 101505 012212,50 182 101 MK 1 101501 0125 101505 0125 101507 012512,75 182 101 MK 1 101505 012713,00 182 101 MK 1 101501 0130 101505 0130 101507 013013,50 189 108 MK 1 101501 0135 101505 0135 101507 013513,75 189 108 MK 1 101505 013714,00 189 108 MK 1 101501 0140 101505 0140 101507 014014,25 212 114 MK 2 101505 014214,50 212 114 MK 2 101501 0145 101505 0145 101507 014514,75 212 114 MK 2 101505 014715,00 212 114 MK 2 101501 0150 101505 0150 101507 015015,25 218 120 MK 2 101505 015215,50 218 120 MK 2 101501 0155 101505 0155 101507 015515,75 218 120 MK 2 101505 0157 101507 015716,00 218 120 MK 2 101501 0160 101505 0160 101507 016016,25 223 125 MK 2 101505 016316,50 223 125 MK 2 101501 0165 101505 0165 101507 016516,75 223 125 MK 2 101505 016717,00 223 125 MK 2 101501 0170 101505 0170 101507 017017,25 228 130 MK 2 101505 017217,50 228 130 MK 2 101501 0175 101505 0175 101507 017517,75 228 130 MK 2 101505 017718,00 228 130 MK 2 101501 0180 101505 0180 101507 018018,50 233 135 MK 2 101501 0185 101505 0185 101507 018518,75 233 135 MK 2 101505 018719,00 233 135 MK 2 101501 0190 101505 0190 101507 019019,50 238 140 MK 2 101501 0195 101505 0195 101507 019519,75 238 140 MK 2 101505 019720,00 238 140 MK 2 101501 0200 101505 0200 101507 020020,50 243 145 MK 2 101501 0205 101505 0205 101507 020521,00 243 145 MK 2 101501 0210 101505 0210 101507 021021,50 248 150 MK 2 101501 0215 101505 0215 101507 021521,75 248 150 MK 2 101505 021722,00 248 150 MK 2 101501 0220 101505 0220 101507 02201104 1104 1104very well suitedwell suitedHSSHSS, vaporisedHSS/Co5, vaporisedmaterial10-22D h8mmLmmL1mmShankdesignart.no.HSSHSS, vaporisedart.no.HSS/Co5, vaporisedart.no.22,50 253 155 MK 2 101501 0225 101505 0225 101507 022523,00 253 155 MK 2 101501 0230 101505 0230 101507 023023,50 276 155 MK 3 101501 0235 101505 0235 101507 023524,00 281 160 MK 3 101501 0240 101505 0240 101507 024024,50 281 160 MK 3 101501 0245 101505 0245 101507 024524,75 281 160 MK 3 101505 024725,00 281 160 MK 3 101501 0250 101505 0250 101507 025025,50 286 165 MK 3 101501 0255 101505 0255 101507 025526,00 286 165 MK 3 101501 0260 101505 0260 101507 026026,50 286 165 MK 3 101501 0265 101505 0265 101507 026527,00 291 170 MK 3 101501 0270 101505 0270 101507 027027,50 291 170 MK 3 101501 0275 101505 0275 101507 027528,00 291 170 MK 3 101501 0280 101505 0280 101507 028028,50 296 175 MK 3 101501 0285 101505 0285 101507 028529,00 296 175 MK 3 101501 0290 101505 0290 101507 029029,50 296 175 MK 3 101501 0295 101505 0295 101507 029530,00 296 175 MK 3 101501 0300 101505 0300 101507 030030,50 301 180 MK 3 101501 0305 101505 0305 101507 030530,75 301 180 MK 3 101505 030731,00 301 180 MK 3 101501 0310 101505 0310 101507 031031,50 301 180 MK 3 101501 0315 101505 0315 101507 031532,00 334 185 MK 4 101501 0320 101505 0320 101507 032032,50 334 185 MK 4 101505 0325 101507 032533,00 334 185 MK 4 101501 0330 101505 0330 101507 033033,50 334 185 MK 4 101501 0335 101505 0335 101507 033534,00 339 190 MK 4 101501 0340 101505 0340 101507 034034,50 339 190 MK 4 101501 0345 101505 034535,00 339 190 MK 4 101501 0350 101505 0350 101507 035035,50 339 190 MK 4 101501 0355 101505 035536,00 344 195 MK 4 101501 0360 101505 036036,50 344 195 MK 4 101501 0365 101505 036537,00 344 195 MK 4 101501 0370 101505 037037,50 344 195 MK 4 101501 037538,00 349 200 MK 4 101501 0380 101505 038038,50 349 200 MK 4 101501 0385 101505 038539,00 349 200 MK 4 101501 0390 101505 039039,50 349 200 MK 4 101501 0395 101505 039540,00 349 200 MK 4 101501 0400 101505 040040,50 354 205 MK 4 101501 0405 101505 040541,00 354 205 MK 4 101501 0410 101505 041041,50 354 205 MK 4 101501 0415 101505 041542,00 354 205 MK 4 101501 0420 101505 042042,50 354 205 MK 4 101501 0425 101505 042543,00 359 210 MK 4 101501 0430 101505 043044,00 359 210 MK 4 101501 0440 101505 044045,00 359 210 MK 4 101501 0450 101505 045046,00 364 215 MK 4 101501 0460 101505 046048,00 369 220 MK 4 101501 0480 101505 048050,00 369 220 MK 4 101501 0500 101505 05001104 1104 1104steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset


Twist drill HSS DIN341N 118°• DIN 341• Shank version: MT• S°= point angle 118°• Cutting material HSS<strong>Drilling</strong>materialD h8mmLmmL1mmShank designart.no.10,0 197 116 MK 1 101601 010010,2 197 116 MK 1 101601 010210,5 197 116 MK 1 101601 010511,0 206 125 MK 1 101601 011011,5 206 125 MK 1 101601 011512,0 215 134 MK 1 101601 012012,5 215 134 MK 1 101601 012513,0 215 134 MK 1 101601 013013,5 223 142 MK 1 101601 013514,0 223 142 MK 1 101601 014014,5 245 147 MK 2 101601 014515,0 245 147 MK 2 101601 015015,5 251 153 MK 2 101601 015516,0 251 153 MK 2 101601 016016,5 257 159 MK 2 101601 016517,0 257 159 MK 2 101601 017017,5 263 165 MK 2 101601 017518,0 263 165 MK 2 101601 018018,5 269 171 MK 2 101601 018519,0 269 171 MK 2 101601 019020,0 275 177 MK 2 101601 020020,5 282 184 MK 2 101601 020521,0 282 184 MK 2 101601 021021,5 282 184 MK 2 101601 021522,0 289 191 MK 2 101601 022022,5 296 198 MK 2 101601 022523,0 296 198 MK 2 101601 02301104very well suitedwell suitedD h8mmLmmL1mmShank designart.no.24,0 327 206 MK 3 101601 024025,0 327 206 MK 3 101601 025026,0 335 214 MK 3 101601 026027,0 343 222 MK 3 101601 027028,0 343 222 MK 3 101601 028029,0 351 230 MK 3 101601 029030,0 351 230 MK 3 101601 030031,0 360 239 MK 3 101601 031032,0 397 248 MK 4 101601 032033,0 397 248 MK 4 101601 033034,0 406 257 MK 4 101601 034035,0 406 257 MK 4 101601 035036,0 416 267 MK 4 101601 036037,0 416 267 MK 4 101601 037038,0 426 277 MK 4 101601 038039,0 426 277 MK 4 101601 039040,0 426 277 MK 4 101601 040041,0 436 287 MK 4 101601 041042,0 436 287 MK 4 101601 042043,0 447 298 MK 4 101601 043044,0 447 298 MK 4 101601 044045,0 447 298 MK 4 101601 045047,0 459 310 MK 4 101601 047048,0 470 321 MK 4 101601 048049,0 470 321 MK 4 101601 049050,0 470 321 MK 4 101601 05001104steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetCore drill HSS DIN344N• Shank version: cylindrical• 3 cutting edges• Straight shank with driving pin lug in accordance with DIN 1809 for use in collets• Cutting material HSS• for drilling pre-drilled, pre-cast or pre-punched holes• The stable design as well as the 3 cutting edges cause alignment inaccuracies and unroundness of the prefabricatedholes to be corrected.materialD h8mmLmmL1mmPre-drill min. ØmmD1mm art.no.4,80 108 74 3,5 5 101510 04805,00 108 74 3,5 5 101510 05005,80 116 80 4,2 6 101510 05806,00 116 80 4,2 6 101510 06006,80 133 93 4,9 7 101510 06807,00 133 93 4,9 7 101510 07007,80 142 100 5,6 8 101510 07808,00 142 100 5,6 8 101510 08008,80 151 107 6,3 9 101510 08809,00 151 107 6,3 9 101510 09009,80 162 116 7,0 10 101510 098010,00 162 116 7,0 10 101510 100011,00 173 125 7,7 11 101510 110011,75 184 134 8,4 12 101510 117512,00 184 134 9,2 12 101510 12001104very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-23


Core drill HSS DIN343N<strong>Drilling</strong>• Shank version: MT• 3 cutting edges• Morse taper shank with driving pin lugs in accordance with DIN228• Robust drill with strong core for optimum guidance in the bore hole• Cutting material HSS• for drilling pre-drilled, pre-cast or pre-punched holes• The stable design as well as the 3 cutting edges cause alignment inaccuraciesand unroundness of the prefabricated holes to be corrected.materialD h8mmLmmL1mmPre-drill min. ØmmShank designart.no.7,80 156 75 5,6 MK 1 101515 07808,00 156 75 5,6 MK 1 101515 08008,80 162 81 6,3 MK 1 101515 08809,80 168 87 7,0 MK 1 101515 098010,00 168 87 7,0 MK 1 101515 100010,75 175 94 7,7 MK 1 101515 107511,00 175 94 7,7 MK 1 101515 110011,75 182 101 8,4 MK 1 101515 117512,00 182 101 8,4 MK 1 101515 120012,75 182 101 9,1 MK 1 101515 127513,00 182 101 9,1 MK 1 101515 130013,75 189 108 9,8 MK 1 101515 137514,00 189 108 9,8 MK 2 101515 140014,75 212 114 10,5 MK 2 101515 147515,00 212 114 10,5 MK 2 101515 150015,75 218 120 11,2 MK 2 101515 157516,00 218 120 11,2 MK 2 101515 160016,75 223 125 11,9 MK 2 101515 167517,00 223 125 11,9 MK 2 101515 170017,75 228 130 12,6 MK 2 101515 177518,00 228 130 12,6 MK 2 101515 180018,70 233 135 13,3 MK 2 101515 187019,00 233 135 13,3 MK 2 101515 190019,70 238 140 14,0 MK 2 101515 197020,00 238 140 14,0 MK 2 101515 200020,70 243 145 14,6 MK 2 101515 207021,00 243 145 14,6 MK 2 101515 21001104very well suitedwell suitedD h8mmLmmL1mmPre-drill min. ØmmShank designart.no.21,70 248 150 15,3 MK 2 101515 217022,00 248 150 15,3 MK 2 101515 220022,70 253 155 16,0 MK 2 101515 227023,00 253 155 16,0 MK 2 101515 230023,70 281 160 16,6 MK 2 101515 237024,00 281 160 16,6 MK 2 101515 240024,70 281 160 17,3 MK 3 101515 247025,00 281 160 17,3 MK 3 101515 250025,70 286 165 18,0 MK 3 101515 257026,00 286 165 18,0 MK 3 101515 260026,70 291 170 18,6 MK 3 101515 267027,70 291 170 19,3 MK 3 101515 277028,00 291 170 19,3 MK 3 101515 280028,70 296 175 20,0 MK 3 101515 287029,70 296 175 20,5 MK 3 101515 297030,00 296 175 20,5 MK 3 101515 300030,60 301 180 21,0 MK 3 101515 306031,60 334 185 22,0 MK 3 101515 316032,00 334 185 22,0 MK 3 101515 320033,00 334 185 23,0 MK 4 101515 330033,60 339 190 24,0 MK 4 101515 336034,60 339 190 25,0 MK 4 101515 346037,60 349 200 26,5 MK 4 101515 376038,00 349 200 26,5 MK 4 101515 380039,60 349 200 28,0 MK 4 101515 396040,00 349 200 28,0 MK 4 101515 40001104steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetwww.atorn.deHigh quality for great performance.Solid carbide high-performance twist drills by ATORN:• solid carbide Ultra-finest grit• longest service life• innovative centring geometry• internal coolant flow• precision-ground for safest machiningThis is but one example of ATORN‘s high-quality drilling <strong>tools</strong>.10-24


High-speed drill TDXL HSS/Co WN 120°• Shank version: cylindrical• S°= point angle 120°• Flat fl ute for increased chip space• New chip fl ute structure for enhanced chip removal, polished groove with wave forms• Newly developed point thinning for a lower torque, axial force and friction• New heat and wear-resistant WXL coating with a very low friction coeffi cient• Cutting material HSS/Co, WXL-coated• Use with water-soluble emulsion recommended• <strong>Drilling</strong> depth 15 x D and 20 x D without internal cooling• Pilot hole recommended<strong>Drilling</strong>Chip fl ute form15 x DDmmLmmL1mm art.no.1,6 70 30 101100 00161,8 75 34 101100 00182,0 80 36 101100 00202,1 80 38 101100 00212,2 80 40 101100 00222,3 85 42 101100 00232,4 85 44 101100 00242,5 85 46 101100 00252,6 100 48 101100 00262,7 100 50 101100 00272,8 100 50 101100 00282,9 105 54 101100 00293,0 105 54 101100 00303,1 110 56 101100 00313,2 110 58 101100 00323,3 110 60 101100 00333,4 115 62 101100 00343,5 115 64 101100 00353,6 115 66 101100 00363,7 120 68 101100 00373,8 120 70 101100 00383,9 120 70 101100 00394,0 120 72 101100 00401107DmmLmmL1mm art.no.4,1 135 74 101100 00414,2 135 76 101100 00424,3 140 78 101100 00434,4 140 80 101100 00444,5 140 82 101100 00454,6 145 84 101100 00464,7 145 86 101100 00474,8 145 86 101100 00484,9 150 88 101100 00495,0 150 90 101100 00505,1 150 92 101100 00515,2 155 94 101100 00525,3 155 96 101100 00535,4 155 98 101100 00545,5 155 100 101100 00555,6 160 102 101100 00565,7 165 104 101100 00575,8 165 106 101100 00586,0 170 108 101100 00606,2 170 112 101100 00626,3 175 114 101100 00636,5 200 118 101100 00656,6 200 120 101100 00661107DmmLmmL1mm art.no.6,8 200 124 101100 00686,9 200 126 101100 00697,0 200 126 101100 00707,1 200 128 101100 00717,5 205 136 101100 00758,0 215 144 101100 00808,1 215 146 101100 00818,2 220 148 101100 00828,5 225 154 101100 00858,6 225 156 101100 00868,8 230 160 101100 00889,0 230 162 101100 00909,3 240 168 101100 00939,5 240 172 101100 00959,7 245 176 101100 00979,8 245 178 101100 009810,0 250 180 101100 010010,5 270 190 101100 010511,0 280 200 101100 011011,5 290 208 101100 011511,8 295 214 101100 011812,0 300 216 101100 0120110720 x DDmmmaterialLmmL1mm art.no.1,6 85 38 101101 00161,8 85 42 101101 00182,0 85 46 101101 00202,1 90 50 101101 00212,2 90 52 101101 00222,3 95 54 101101 00232,4 95 56 101101 00242,5 100 58 101101 00252,6 110 60 101101 00262,7 115 64 101101 00272,8 115 66 101101 00282,9 120 68 101101 00293,0 120 70 101101 00303,1 125 72 101101 00313,2 125 74 101101 00323,3 125 76 101101 00331107very well suitedwell suitedDmmLmmL1mm art.no.3,4 130 80 101101 00343,5 130 82 101101 00353,7 135 86 101101 00373,8 140 88 101101 00384,0 140 92 101101 00404,1 155 96 101101 00414,2 155 98 101101 00424,3 160 100 101101 00434,5 165 104 101101 00454,6 165 106 101101 00464,8 170 112 101101 00485,0 175 116 101101 00505,1 180 118 101101 00515,2 180 120 101101 00525,5 185 128 101101 00555,7 190 132 101101 00571107DmmLmmL1mm art.no.5,8 200 134 101101 00586,0 200 138 101101 00606,3 200 146 101101 00636,5 225 150 101101 00656,8 225 158 101101 00686,9 230 160 101101 00697,0 230 162 101101 00707,5 245 174 101101 00758,0 255 184 101101 00808,1 255 188 101101 00818,2 260 190 101101 00828,5 265 196 101101 00859,0 275 208 101101 009010,0 300 230 101101 010011,0 350 254 101101 011012,0 350 276 101101 01201107superalloys Fe/NiCo-based aluminium copper graphitesteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-25


Automated high-speed short-chip drill HSS-E PM DIN1897 130°<strong>Drilling</strong>• S°= point angle 130° (self-centring)• Low wear on the cutting edges• Especially resistant to high temperatures• Extended service life• Excellent chip removal• Short chips• Cutting material HSS-E-PM, TiN-coatedmaterialD h8mmLmmL1mm art.no.1,0 26 6 101085 01001,1 28 7 101085 01101,2 30 8 101085 01201,3 30 8 101085 01301,4 32 9 101085 01401,5 32 9 101085 01501,6 34 10 101085 01601,7 34 10 101085 01701,8 36 11 101085 01801,9 36 11 101085 01902,0 38 12 101085 02002,1 38 12 101085 02102,2 40 13 101085 02202,3 40 13 101085 02302,4 43 14 101085 02402,5 43 14 101085 02502,6 43 14 101085 02602,7 46 16 101085 02702,8 46 16 101085 02802,9 46 16 101085 02903,0 46 16 101085 03003,1 49 18 101085 03103,2 49 18 101085 03203,3 49 18 101085 03303,4 52 20 101085 03403,5 52 20 101085 03503,6 52 20 101085 03603,7 52 20 101085 03703,8 55 22 101085 03803,9 55 22 101085 03904,0 55 22 101085 04001106very well suitedwell suitedD h8mmLmmL1mm art.no.4,1 55 22 101085 04104,2 55 22 101085 04204,3 58 24 101085 04304,4 58 24 101085 04404,5 58 24 101085 04504,6 58 24 101085 04604,7 58 24 101085 04704,8 62 26 101085 04804,9 62 26 101085 04905,0 62 26 101085 05005,1 62 26 101085 05105,2 62 26 101085 05205,3 62 26 101085 05305,4 66 28 101085 05405,5 66 28 101085 05505,6 66 28 101085 05605,7 66 28 101085 05705,8 66 28 101085 05805,9 66 28 101085 05906,0 66 28 101085 06006,1 70 31 101085 06106,2 70 31 101085 06206,3 70 31 101085 06306,4 70 31 101085 06406,5 70 31 101085 06506,6 70 31 101085 06606,7 70 31 101085 06706,8 74 34 101085 06806,9 74 34 101085 06907,0 74 34 101085 07007,1 74 34 101085 07101106D h8mmLmmL1mm art.no.7,2 74 34 101085 07207,3 74 34 101085 07307,4 74 34 101085 07407,5 74 34 101085 07507,6 79 37 101085 07607,7 79 37 101085 07707,8 79 37 101085 07807,9 79 37 101085 07908,0 79 37 101085 08008,1 79 37 101085 08108,2 79 37 101085 08208,3 79 37 101085 08308,4 79 37 101085 08408,5 79 37 101085 08508,8 84 40 101085 08809,0 84 40 101085 09009,3 84 40 101085 09309,5 84 40 101085 09509,8 89 43 101085 098010,0 89 43 101085 100010,2 89 43 101085 102010,5 89 43 101085 105011,0 95 47 101085 110011,5 95 47 101085 115012,0 102 51 101085 120012,3 102 51 101085 123012,5 102 51 101085 125012,7 102 51 101085 127013,0 102 51 101085 130013,5 107 54 101085 135014,0 107 54 101085 14001106superalloys Fe/NiCo-based aluminium copper graphitesteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSafety at the workplacePlease protect your eyes, hearing and respiratory organs!Ear protectorsSafety gogglesatBreathing protection apparStartingon90-48pageStartingon90-45pageStartingonpage90-50us10-26


High-speed short-chip drill HSS-E PM DIN338 130°• S°= point angle 130° (self-centring)• Low wear on the cutting edges• Especially resistant to high temperatures• Extended service life• Excellent chip removal• Short chips• Cutting material HSS-E-PM, TiN-coated<strong>Drilling</strong>materialD h8mmLmmL1mm art.no.1,0 34 12 101095 01001,1 36 14 101095 01101,2 38 16 101095 01201,3 38 16 101095 01301,4 40 18 101095 01401,5 40 18 101095 01501,6 43 20 101095 01601,7 43 20 101095 01701,8 46 22 101095 01801,9 46 22 101095 01902,0 49 24 101095 02002,1 49 24 101095 02102,2 53 27 101095 02202,3 53 27 101095 02302,4 57 30 101095 02402,5 57 30 101095 02502,6 57 30 101095 02602,7 61 33 101095 02702,8 61 33 101095 02802,9 61 33 101095 02903,0 61 33 101095 03003,1 65 36 101095 03103,2 65 36 101095 03203,3 65 36 101095 03303,4 70 39 101095 03403,5 70 39 101095 03503,6 70 39 101095 03603,7 70 39 101095 03703,8 75 43 101095 03803,9 75 43 101095 03904,0 75 43 101095 04004,1 75 43 101095 04101106very well suitedwell suitedD h8mmLmmL1mm art.no.4,2 75 43 101095 04204,3 80 47 101095 04304,4 80 47 101095 04404,5 80 47 101095 04504,6 80 47 101095 04604,7 80 47 101095 04704,8 86 52 101095 04804,9 86 52 101095 04905,0 86 52 101095 05005,1 86 52 101095 05105,2 86 52 101095 05205,3 86 52 101095 05305,4 93 57 101095 05405,5 93 57 101095 05505,6 93 57 101095 05605,7 93 57 101095 05705,8 93 57 101095 05805,9 93 57 101095 05906,0 93 57 101095 06006,1 101 63 101095 06106,2 101 63 101095 06206,3 101 63 101095 06306,4 101 63 101095 06406,5 101 63 101095 06506,6 101 63 101095 06606,7 101 63 101095 06706,8 109 69 101095 06806,9 109 69 101095 06907,0 109 69 101095 07007,1 109 69 101095 07107,2 109 69 101095 07207,3 109 69 101095 07301106D h8mmLmmL1mm art.no.7,4 109 69 101095 07407,5 109 69 101095 07507,6 117 75 101095 07607,7 117 75 101095 07707,8 117 75 101095 07807,9 117 75 101095 07908,0 117 75 101095 08008,1 117 75 101095 08108,2 117 75 101095 08208,3 117 75 101095 08308,4 117 75 101095 08408,5 117 75 101095 08508,8 125 81 101095 08809,0 125 81 101095 09009,3 125 81 101095 09309,5 125 81 101095 09509,8 133 87 101095 098010,0 133 87 101095 100010,2 133 87 101095 102010,3 133 87 101095 103010,5 142 94 101095 105011,0 142 94 101095 110011,5 151 101 101095 115012,0 151 101 101095 120012,3 151 101 101095 123012,5 151 101 101095 125012,7 160 108 101095 127013,0 160 108 101095 130013,5 160 108 101095 135014,0 160 108 101095 1400steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset1106All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-27


Twist drill EX-SUS-GDS<strong>Drilling</strong>• large chip spaces, high toughness• Reduced heat development• Shank version: cylindrical• from Ø 12.1 with driving plane according to DIN1835B• S°= point angle: < Ø 2 mm = 140°,≤ Ø 4 mm = 130°,> Ø 4 mm = 120°• Cutting material HSS-E-V3, TiN-coated• Centre geometry: up to Ø 13 mm S-design,from Ø 13.5 mm N-design• available on request: Intermediate sizes from Ø 0.5 to Ø 6 mm (in 0.01 mm increments)D h8mmLmmL1mmD1mm art.no.1,0 38 6 3 114045 01001,1 39 7 3 114045 01101,2 40 8 3 114045 01201,3 40 8 3 114045 01301,4 41 9 3 114045 01401,5 41 9 3 114045 01501,6 42 10 3 114045 01601,7 42 10 3 114045 01701,8 43 11 3 114045 01801,9 43 11 3 114045 01902,0 44 12 3 114045 02002,1 44 12 3 114045 02102,2 45 13 3 114045 02202,3 45 13 3 114045 02302,4 46 14 3 114045 02402,5 46 14 3 114045 02502,6 46 14 3 114045 02602,7 48 16 3 114045 02702,8 48 16 3 114045 02802,9 48 16 3 114045 02903,0 48 16 3 114045 03003,1 50 18 4 114045 03103,2 50 18 4 114045 03203,3 50 18 4 114045 03303,4 52 20 4 114045 03403,5 52 20 4 114045 03503,6 52 20 4 114045 03603,7 52 20 4 114045 03703,8 54 22 4 114045 03803,9 54 22 4 114045 03904,0 54 22 4 114045 04004,1 66 22 6 114045 04104,2 66 22 6 114045 04204,3 68 24 6 114045 04304,4 68 24 6 114045 04404,5 68 24 6 114045 04504,6 68 24 6 114045 04604,7 68 24 6 114045 04704,8 70 26 6 114045 04804,9 70 26 6 114045 04905,0 70 26 6 114045 05005,1 70 26 6 114045 05105,2 70 26 6 114045 05205,3 70 28 6 114045 05305,4 72 28 6 114045 05401107very well suitedwell suitedmaterialD h8mmLmmL1mmD1mm art.no.5,5 72 28 6 114045 05505,6 72 28 6 114045 05605,7 72 28 6 114045 05705,8 72 28 6 114045 05805,9 72 28 6 114045 05906,0 72 28 6 114045 06006,1 75 31 8 114045 06106,2 75 31 8 114045 06206,3 75 31 8 114045 06306,4 75 31 8 114045 06406,5 75 31 8 114045 06506,6 75 31 8 114045 06606,7 75 31 8 114045 06706,8 78 34 8 114045 06806,9 78 34 8 114045 06907,0 78 34 8 114045 07007,1 78 34 8 114045 07107,2 78 34 8 114045 07207,3 78 34 8 114045 07307,4 78 34 8 114045 07407,5 78 34 8 114045 07507,6 81 37 8 114045 07607,7 81 37 8 114045 07707,8 81 37 8 114045 07807,9 81 37 8 114045 07908,0 81 37 8 114045 08008,1 87 37 10 114045 08108,2 87 37 10 114045 08208,3 87 37 10 114045 08308,4 87 37 10 114045 08408,5 87 37 10 114045 08508,6 90 40 10 114045 08608,7 90 40 10 114045 08708,8 90 40 10 114045 08808,9 90 40 10 114045 08909,0 90 40 10 114045 09009,1 90 40 10 114045 09109,2 90 40 10 114045 09209,3 90 40 10 114045 09309,4 90 40 10 114045 09409,5 90 40 10 114045 09509,6 93 43 10 114045 09609,7 93 43 10 114045 09709,8 93 43 10 114045 09809,9 93 43 10 114045 09901107D h8mmLmmL1mmD1mm art.no.10,0 93 43 10 114045 100010,1 100 43 12 114045 101010,2 100 43 12 114045 102010,3 100 43 12 114045 103010,4 100 43 12 114045 104010,5 100 43 12 114045 105010,6 100 43 12 114045 106010,7 104 47 12 114045 107010,8 104 47 12 114045 108010,9 104 47 12 114045 109011,0 104 47 12 114045 110011,1 104 47 12 114045 111011,2 104 47 12 114045 112011,3 104 47 12 114045 113011,4 104 47 12 114045 114011,5 104 47 12 114045 115011,6 104 47 12 114045 116011,7 104 47 12 114045 117011,8 104 47 12 114045 118011,9 108 51 12 114045 119012,0 108 51 12 114045 120012,1 108 51 12 114045 121012,2 108 51 12 114045 122012,3 108 51 12 114045 123012,4 108 51 12 114045 124012,5 108 51 12 114045 125012,6 108 51 12 114045 126012,7 108 51 12 114045 127012,8 108 51 12 114045 128012,9 108 51 12 114045 129013,0 108 51 12 114045 130013,5 114 54 16 114045 135014,0 114 54 16 114045 140014,5 116 56 16 114045 145015,0 116 56 16 114045 150015,5 118 58 16 114045 155016,0 118 58 16 114045 160016,5 126 60 20 114045 165017,0 126 60 20 114045 170017,5 128 62 20 114045 175018,0 128 62 20 114045 180018,5 130 64 20 114045 185019,0 130 64 20 114045 190019,5 132 66 20 114045 195020,0 132 66 20 114045 20001107superalloys Fe/NiCo-based aluminium copper graphitesteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-28


Twist drill EX-SUS-GDR• large chip spaces, high toughness• Reduced heat development• Shank version: cylindrical• from Ø 12.1 with driving plane according to DIN1835B• S°= point angle: ≤ Ø 4 mm = 130°, > Ø 4 mm = 120°• Cutting material HSS-E-V3, TiN-coated• Centre geometry: up to Ø 13 mm S-design, from Ø 13.5 mm N-design• available on request: Intermediate sizes from Ø 2.0 to Ø 6 mm (in 0.01 mm increments)<strong>Drilling</strong>D h8mmLmmL1mmD1mm art.no.2,0 56 24 3 114050 02002,1 56 24 3 114050 02102,2 59 27 3 114050 02202,3 59 27 3 114050 02302,4 62 30 3 114050 02402,5 62 30 3 114050 02502,6 62 30 3 114050 02602,7 65 33 3 114050 02702,8 65 33 3 114050 02802,9 65 33 3 114050 02903,0 65 33 3 114050 03003,1 68 36 4 114050 03103,2 68 36 4 114050 03203,3 68 36 4 114050 03303,4 71 39 4 114050 03403,5 71 39 4 114050 03503,6 71 39 4 114050 03603,7 71 39 4 114050 03703,8 75 43 4 114050 03803,9 75 43 4 114050 03904,0 75 43 4 114050 04004,1 87 43 6 114050 04104,2 87 43 6 114050 04204,3 91 47 6 114050 04304,4 91 47 6 114050 04404,5 91 47 6 114050 04504,6 91 47 6 114050 04604,7 91 47 6 114050 04704,8 96 52 6 114050 04804,9 96 52 6 114050 04905,0 96 52 6 114050 05005,1 96 52 6 114050 05105,2 96 52 6 114050 05205,3 96 52 6 114050 05305,4 101 57 6 114050 05405,5 101 57 6 114050 05505,6 101 57 6 114050 05605,7 101 57 6 114050 05705,8 101 57 6 114050 05805,9 101 57 6 114050 05906,0 101 57 6 114050 06006,1 107 63 8 114050 06101107very well suitedwell suitedmaterialD h8mmLmmL1mmD1mm art.no.6,2 107 63 8 114050 06206,3 107 63 8 114050 06306,4 107 63 8 114050 06406,5 107 63 8 114050 06506,6 107 63 8 114050 06606,7 107 63 8 114050 06706,8 113 69 8 114050 06806,9 113 69 8 114050 06907,0 113 69 8 114050 07007,1 113 69 8 114050 07107,2 113 69 8 114050 07207,3 113 69 8 114050 07307,4 113 69 8 114050 07407,5 113 69 8 114050 07507,6 119 75 8 114050 07607,7 119 75 8 114050 07707,8 119 75 8 114050 07807,9 119 75 8 114050 07908,0 119 75 8 114050 08008,1 125 75 10 114050 08108,2 125 75 10 114050 08208,3 125 75 10 114050 08308,4 125 75 10 114050 08408,5 125 75 10 114050 08508,6 131 81 10 114050 08608,7 131 81 10 114050 08708,8 131 81 10 114050 08808,9 131 81 10 114050 08909,0 131 81 10 114050 09009,1 131 81 10 114050 09109,2 131 81 10 114050 09209,3 131 81 10 114050 09309,4 131 81 10 114050 09409,5 131 81 10 114050 09509,6 137 87 10 114050 09609,7 137 87 10 114050 09709,8 137 87 10 114050 09809,9 137 87 10 114050 099010,0 137 87 10 114050 100010,1 144 87 12 114050 101010,2 144 87 12 114050 102010,3 144 87 12 114050 10301107D h8mmLmmL1mmD1mm art.no.10,4 144 87 12 114050 104010,5 144 87 12 114050 105010,6 144 87 12 114050 106010,7 151 94 12 114050 107010,8 151 94 12 114050 108010,9 151 94 12 114050 109011,0 151 94 12 114050 110011,1 151 94 12 114050 111011,2 151 94 12 114050 112011,3 151 94 12 114050 113011,4 151 94 12 114050 114011,5 151 94 12 114050 115011,6 151 94 12 114050 116011,7 151 94 12 114050 117011,8 151 94 12 114050 118011,9 158 101 12 114050 119012,0 158 101 12 114050 120012,1 158 101 16 114050 121012,2 158 101 16 114050 122012,3 158 101 16 114050 123012,4 158 101 16 114050 124012,5 158 101 16 114050 125012,6 158 101 16 114050 126012,7 158 101 16 114050 127012,8 158 101 16 114050 128012,9 158 101 16 114050 129013,0 158 101 16 114050 130013,5 166 106 16 114050 135014,0 166 106 16 114050 140014,5 169 109 16 114050 145015,0 169 109 16 114050 150015,5 172 112 16 114050 155016,0 172 112 16 114050 160016,5 181 115 20 114050 165017,0 181 115 20 114050 170017,5 184 118 20 114050 175018,0 184 118 20 114050 180018,5 188 122 20 114050 185019,0 188 122 20 114050 190019,5 191 125 20 114050 195020,0 191 125 20 114050 20001107steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-29


High-speed drill NEXUS<strong>Drilling</strong>• Spiral angle with a strong twist (35-40°) and unique fl ute forms reduce the cutting forcesand the heat generated during machining• Short breakage chips even with tough materials such as INOX or copper• Shank version: cylindrical• S°= point angle: < Ø 2 mm = 140°, Ø 4 mm = 130°, > Ø 4 mm = 120°• Cutting material: high-quality vanadium-alloy HSS-WDI-coated,new multi-layer coating, wear-resistant, suited for a broad range of materialsCaptionGDS, shortD h8mmS°LmmL1mmD1mm art.no.1,00 140 38 6 3 114046 01001,10 140 39 7 3 114046 01101,20 140 40 8 3 114046 01201,30 140 40 8 3 114046 01301,40 140 41 9 3 114046 01401,50 140 41 9 3 114046 01501,60 140 42 10 3 114046 01601,70 140 42 10 3 114046 01701,80 140 43 11 3 114046 01801,81 140 43 11 3 114046 01811,83 140 43 11 3 114046 01831,90 140 43 11 3 114046 01902,00 130 44 12 3 114046 02002,10 130 44 12 3 114046 02102,11 130 44 12 3 114046 02112,13 130 45 13 3 114046 02132,20 130 45 13 3 114046 02202,28 130 45 13 3 114046 02282,30 130 45 13 3 114046 02302,38 130 46 14 3 114046 02382,40 130 46 14 3 114046 02402,50 130 46 14 3 114046 02502,60 130 46 14 3 114046 02602,70 130 48 16 3 114046 02702,76 130 48 16 3 114046 02762,78 130 48 16 3 114046 02782,80 130 48 16 3 114046 02802,90 130 48 16 3 114046 02903,00 130 48 16 3 114046 03003,10 130 50 18 4 114046 03103,20 130 50 18 4 114046 03203,25 130 50 18 4 114046 03253,30 130 50 18 4 114046 03303,40 130 52 20 4 114046 03403,50 130 52 20 4 114046 03503,60 130 52 20 4 114046 03601107D h8mmS°LmmL1mmD1mm art.no.3,65 130 52 20 4 114046 03653,67 130 52 20 4 114046 03673,70 130 52 20 4 114046 03703,80 130 54 22 4 114046 03803,90 130 54 22 4 114046 03904,00 130 54 22 4 114046 04004,10 120 66 22 6 114046 04104,20 120 66 22 6 114046 04204,30 120 68 24 6 114046 04304,40 120 68 24 6 114046 04404,50 120 68 24 6 114046 04504,59 120 68 24 6 114046 04594,60 120 68 24 6 114046 04604,63 120 68 24 6 114046 04634,70 120 68 24 6 114046 04704,80 120 70 26 6 114046 04804,90 120 70 26 6 114046 04905,0 120 70 26 6 114046 05005,10 120 70 26 6 114046 05105,20 120 70 26 6 114046 05205,30 120 70 26 6 114046 05305,40 120 72 28 6 114046 05405,48 120 72 28 6 114046 05485,50 120 72 28 6 114046 05505,60 120 72 28 6 114046 05605,70 120 72 28 6 114046 05705,80 120 72 28 6 114046 05805,90 120 72 28 6 114046 05906,00 120 72 28 6 114046 06006,10 120 75 28 6 114046 06106,20 120 75 31 6 114046 06206,30 120 75 31 6 114046 06306,40 120 75 31 6 114046 06406,50 120 75 31 8 114046 06506,60 120 75 31 8 114046 06606,80 120 78 34 8 114046 06801107D h8mmS°LmmL1mmD1mm art.no.6,90 120 78 34 8 114046 06907,00 120 78 34 8 114046 07007,34 120 78 34 8 114046 07347,38 120 78 34 8 114046 07387,40 120 78 34 8 114046 07407,50 120 78 34 8 114046 07507,80 120 81 37 8 114046 07807,90 120 81 37 8 114046 07908,00 120 81 37 8 114046 08008,10 120 87 37 10 114046 08108,20 120 87 37 10 114046 08208,30 120 87 37 10 114046 08308,40 120 87 37 10 114046 08408,50 120 87 37 10 114046 08508,60 120 90 40 10 114046 08608,70 120 90 40 10 114046 08708,80 120 90 40 10 114046 08809,00 120 90 40 10 114046 09009,18 120 90 40 10 114046 09189,20 120 90 40 10 114046 09209,24 120 90 40 10 114046 09249,34 120 90 40 10 114046 09349,36 120 90 40 10 114046 09369,50 120 90 40 10 114046 09509,80 120 93 43 10 114046 098010,00 120 93 43 10 114046 100010,20 120 100 43 12 114046 102010,30 120 100 43 12 114046 103010,40 120 100 43 12 114046 104010,50 120 100 43 12 114046 105011,00 120 104 47 12 114046 110011,20 120 100 43 12 114046 112011,50 120 104 47 12 114046 115012,00 120 108 51 12 114046 12001107GDR, longD h8mmS°LmmL1mmD1mm art.no.2,00 130 56 24 3 114051 02002,30 130 59 27 3 114051 02302,50 130 62 30 3 114051 02502,60 130 62 30 3 114051 02602,80 130 65 33 3 114051 02803,00 130 65 33 3 114051 03003,30 130 68 36 4 114051 03303,40 130 71 39 4 114051 03403,50 130 71 39 4 114051 03504,00 130 75 43 4 114051 04004,20 120 87 43 6 114051 04201107very well suitedwell suitedmaterial10-30D h8mmS°LmmL1mmD1mm art.no.4,30 120 91 47 6 114051 04304,50 120 91 47 6 114051 04505,00 120 96 52 6 114051 05005,10 120 96 52 6 114051 05105,20 120 96 52 6 114051 05205,50 120 101 57 6 114051 05506,00 120 101 57 6 114051 06006,80 120 113 69 8 114051 06806,90 120 113 69 8 114051 06907,00 120 113 69 8 114051 07008,00 120 119 75 8 114051 08001107D h8mmS°LmmL1mmD1mm art.no.8,50 120 125 75 10 114051 08508,60 120 131 81 10 114051 08608,80 120 131 81 10 114051 08809,00 120 131 81 10 114051 090010,00 120 137 87 10 114051 100010,30 120 144 87 12 114051 103010,40 120 144 87 12 114051 104010,50 120 144 87 12 114051 105011,00 120 151 94 12 114051 110012,00 120 158 101 12 114051 12001107steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset


Twist drill carbide-fitted DIN8037 118°• S°= point angle 118°• Shank version: Cylindrical, with driving pin according to DIN 1809 for use collets• Cutting material of cutting element: Solid carbide K10• Solid carbide cutting edge with four-facet ground tip• Intermediate sizes are available on request<strong>Drilling</strong>D h8mmLmmL1mmL3mm art.no.3,0 50 20 16 5 110501 00303,2 56 25 21 5 110501 00323,5 56 25 20 5 110501 00354,0 56 25 20 5 110501 00404,2 63 28 23 5 110501 00424,5 63 28 22 5 110501 00455,0 63 28 22 5 110501 00505,5 71 32 25 5 110501 00551108very well suitedwell suitedmaterialD h8mmLmmL1mmL3mm art.no.6,0 71 32 25 5 110501 00606,5 71 32 24 1 110501 00657,0 80 40 31 1 110501 00707,5 80 40 31 1 110501 00758,0 80 40 30 1 110501 00808,5 90 50 40 1 110501 00859,0 90 50 39 1 110501 00909,5 90 50 39 1 110501 00951108D h8mmLmmL1mmL3mm art.no.10,0 100 56 44 1 110501 010010,5 100 56 44 1 110501 010511,0 100 56 42 1 110501 011012,0 112 63 47 1 110501 012013,0 112 63 47 1 110501 013014,0 125 71 54 1 110501 014015,0 125 71 53 1 110501 015016,0 140 80 60 1 110501 01601108superalloys Fe/NiCo-based aluminium copper graphitealloyssteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetTwist drill solid carbide Sigma-Drill-Hard• Company standard• Shank version: cylindrical• S°= point angle 140°• Spiral angle 15°• Cutting material solid carbide, superfine grain, DZ-TiAlN-coated• 5xD• for hardened materials up to 70 HRc• excellent wear-resistance and tensile strength properties• Special point thinning of the chisel edge for hardened materials, preventingchunking in the centre• additional corner radius, which prevents chunking at the outer cutting edgeD h7mmL1mmLmmD1 h6mm art.no.2,0 16 55 3 111520 02002,0 21 55 3 111520 02122,1 12 55 3 111520 02102,2 16 55 3 111520 02202,3 16 55 3 111520 02302,4 16 55 3 111520 02402,5 16 55 3 111520 02502,6 16 55 3 111520 02602,7 16 55 3 111520 02702,8 16 55 3 111520 02801112very well suitedwell suitedmaterialD h7mmL1mmLmmD1 h6mm art.no.2,9 16 55 3 111520 02903,0 21 60 4 111520 03003,4 24 60 4 111520 03403,5 24 60 4 111520 03504,0 27 60 4 111520 04004,3 29 63 6 111520 04304,4 29 64 6 111520 04405,0 32 68 6 111520 05005,1 34 72 6 111520 05105,2 34 72 6 111520 05201112D h7mmL1mmLmmD1 h6mm art.no.6,0 41 81 6 111520 06006,8 43 83 8 111520 06806,9 42 83 8 111520 06907,0 43 83 8 111520 07008,0 48 90 8 111520 08008,5 53 96 10 111520 08508,6 55 96 10 111520 08609,0 55 98 10 111520 090010,0 60 105 10 111520 100010,3 66 112 12 111520 10301112superalloys Fe/NiCo-based aluminium copper graphitesteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedD h7mmPrices in bold print = delivery ex stockL1mmLmmD1 h6mm art.no.10-31


N O U VEAU • N UEVO •Micro-high-speed drill, solid carbide, WN 118/130°• NEW • NUOVO •NY<strong>Drilling</strong>• S° = point angle 130°, 118° bis Ø 0.35 mm• Straight shank in accordance with DIN 6535 HA• Spiral angle 30°• Cutting material, solid carbide superfine grain TiAlN• Tolerance D = 0.004 mmmaterialDmmD1 h6mmLmmL1mm art.no.0,10 3,0 38 1,0 111550 00100,15 3,0 38 2,0 111550 00150,20 3,0 38 2,5 111550 00200,25 3,0 38 4,0 111550 00250,30 3,0 38 5,5 111550 00300,35 3,0 38 5,5 111550 00350,40 3,0 38 6,0 111550 00400,45 3,0 38 6,0 111550 00450,50 3,0 38 6,0 111550 00500,55 3,0 38 8,0 111550 00550,60 3,0 38 8,0 111550 00600,65 3,0 38 8,0 111550 00650,70 3,0 38 8,0 111550 00700,75 3,0 38 8,0 111550 00750,80 3,0 38 8,0 111550 00800,85 3,0 38 8,0 111550 00850,90 3,0 38 8,0 111550 00900,95 3,0 38 8,0 111550 00950,97 3,0 38 8,0 111550 00970,98 3,0 38 8,0 111550 00980,99 3,0 38 8,0 111550 00991,00 3,0 38 10,0 111550 01001,01 3,0 38 10,0 111550 01011,02 3,0 38 10,0 111550 01021,03 3,0 38 10,0 111550 01031,05 3,0 38 10,0 111550 01051,10 3,0 38 10,0 111550 01101,15 3,0 38 10,0 111550 01151,20 3,0 38 10,0 111550 01201,25 3,0 38 10,0 111550 01251,30 3,0 38 10,0 111550 01301,35 3,0 38 10,0 111550 01351,40 3,0 38 10,0 111550 01401,45 3,0 38 10,0 111550 01451,47 3,0 38 10,0 111550 01471,48 3,0 38 10,0 111550 01481,49 3,0 38 10,0 111550 01491,50 3,0 38 12,0 111550 01501,51 3,0 38 12,0 111550 01511,52 3,0 38 12,0 111550 01521,53 3,0 38 12,0 111550 01531,55 3,0 38 12,0 111550 01551111very well suitedwell suitedDmmsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetD1 h6mmLmmL1mm art.no.1,60 3,0 38 12,0 111550 01601,65 3,0 38 12,0 111550 01651,70 3,0 38 12,0 111550 01701,75 3,0 38 12,0 111550 01751,80 3,0 38 12,0 111550 01801,85 3,0 38 12,0 111550 01851,90 3,0 38 12,0 111550 01901,95 3,0 38 12,0 111550 01951,97 3,0 38 12,0 111550 01971,98 3,0 38 12,0 111550 01981,99 3,0 38 12,0 111550 01992,00 3,0 38 12,0 111550 02002,01 3,0 38 12,0 111550 02012,02 3,0 38 12,0 111550 02022,03 3,0 38 12,0 111550 02032,05 3,0 38 12,0 111550 02052,10 3,0 38 12,0 111550 02102,15 3,0 38 12,0 111550 02152,20 3,0 38 12,0 111550 02202,25 3,0 38 12,0 111550 02252,30 3,0 38 12,0 111550 02302,35 3,0 38 12,0 111550 02352,40 3,0 38 12,0 111550 02402,45 3,0 38 12,0 111550 02452,50 3,0 38 12,0 111550 02502,51 3,0 38 12,0 111550 02512,52 3,0 38 12,0 111550 02522,53 3,0 38 12,0 111550 02532,55 3,0 38 12,0 111550 02552,60 3,0 38 12,0 111550 02602,65 3,0 38 12,0 111550 02652,70 3,0 38 12,0 111550 02702,75 3,0 38 12,0 111550 02752,80 3,0 38 12,0 111550 02802,85 3,0 38 12,0 111550 02852,90 3,0 38 12,0 111550 02902,95 3,0 38 12,0 111550 02952,96 3,0 38 12,0 111550 02962,97 3,0 38 12,0 111550 02972,98 3,0 38 12,0 111550 02982,99 3,0 38 12,0 111550 02993,00 3,0 38 12,0 111550 03001111www.atorn.deHigh quality for great performance.Solid carbide high-performance twist drills by ATORN:• solid carbide Ultra-finest grit• longest service life• innovative centring geometry• internal coolant flew• precision-ground for safest machiningThis is but one example of ATORN‘s high-quality drilling <strong>tools</strong>.10-32


Twist drill, solid carbide DIN6535K 145° S-Class• DIN 6535K• Shank version: cylindrical• Reinforced shank according to DIN 6535 HA• S°= point angle 145°• L3 = usable length• Cutting material, solid carbide superfine grain AlTiN-coated• Shank diameter tolerance constricted for fi tting into hydraulic expansion chucks• double guide chamfers for a high degree of stability and enhanced coolant supply• Regrinding on conventional grinding machines possible• <strong>Drilling</strong> in stainless steels, low-alloy steels, high-alloy steel, Inconel, titanium and grey cast ironMaterial: 42CrMo4example Ø 10 mm:Vc = 140 m/min Vf = 1600 mm/min<strong>Drilling</strong>DmmD1mmL1mmLmmL3mmTapping holeart.no.3,0 6 20 62 17 111301 03003,1 6 20 62 17 111301 03103,2 6 20 62 17 111301 03203,3 6 20 62 17 M4 (4x0.7) 111301 03303,4 6 20 62 17 111301 03403,5 6 20 62 17 111301 03503,6 6 20 62 17 111301 03603,7 6 20 62 17 M4.5 (4.5x0.75) 111301 03703,8 6 20 62 17 111301 03803,9 6 20 62 17 111301 03904,0 6 24 66 21 111301 04004,1 6 24 66 21 111301 04104,2 6 24 66 21 M5 (5x0.8) 111301 04204,3 6 24 66 21 111301 04304,4 6 24 66 21 111301 04404,5 6 24 66 21 111301 04504,6 6 24 66 21 111301 04604,7 6 24 66 21 111301 04704,8 6 24 66 21 111301 04804,9 6 24 66 21 111301 04905,0 6 24 66 21 M6(6x1) 111301 05005,1 6 24 66 21 111301 05105,2 6 24 66 21 111301 05205,25 6 24 66 21 111301 05255,3 6 24 66 21 111301 05305,4 6 24 66 21 111301 05405,5 6 24 66 21 111301 05505,6 6 24 66 21 111301 05605,7 6 24 66 21 111301 05705,8 6 24 66 21 111301 05805,9 6 24 66 21 111301 05906,0 6 24 66 21 M7 (7x1) 111301 06006,1 6 28 66 28 111301 06106,2 6 28 66 28 111301 06206,25 8 34 79 28 111301 06256,3 8 34 79 28 111301 06306,4 8 34 79 28 111301 06406,5 8 34 79 28 111301 06506,6 8 34 79 28 111301 06606,7 8 34 79 28 111301 06706,8 8 34 79 28 M8 (8x1.25) 111301 06806,9 8 34 79 28 111301 06907,0 8 34 79 28 8x1 111301 07007,2 8 34 79 28 111301 07207,25 8 34 79 28 111301 07257,3 8 34 79 28 111301 07307,4 8 34 79 28 111301 07407,5 8 34 79 28 111301 07507,6 8 34 79 28 111301 07607,7 8 34 79 28 111301 07707,8 8 34 79 28 M9 (9x1.25) 111301 07807,9 8 34 79 28 111301 07908,0 8 34 79 28 111301 08008,1 10 41 89 40 111301 08108,2 10 41 89 40 111301 08208,3 10 41 89 40 111301 08301109very well suitedwell suitedmaterialDmmD1mmL1mmLmmL3mmTapping hole8,4 10 47 89 40 111301 08408,5 10 47 89 40 M10 (10x1.5) 111301 08508,6 10 47 89 40 111301 08608,7 10 47 89 40 111301 08708,8 10 47 89 40 M10x1.25 111301 08808,9 10 47 89 40 111301 08909,0 10 47 89 40 111301 09009,1 10 47 89 40 111301 09109,2 10 47 89 40 111301 09209,25 10 47 89 40 111301 09259,3 10 47 89 40 111301 09309,4 10 47 89 40 111301 09409.5 10 47 89 40 M11x1.5 111301 09509,6 10 47 89 40 111301 09609,7 10 47 89 40 111301 09709,8 10 47 89 40 111301 09809,9 10 47 89 40 111301 099010,0 10 47 89 40 111301 100010,1 10 55 102 45 111301 101010,2 12 55 102 45 M12 (12x1.75) 111301 102010,3 12 55 102 45 111301 103010,4 12 55 102 45 111301 104010,5 12 55 102 45 111301 105010,6 12 55 102 45 111301 106010,7 12 55 102 45 111301 107010,8 12 55 102 45 M12x1.25 111301 108010,9 12 55 102 45 111301 109011,0 12 55 102 45 111301 110011,1 12 55 102 45 111301 111011,2 12 55 102 45 111301 112011,25 12 55 102 45 111301 112511,3 12 55 102 45 111301 113011,4 12 55 102 45 111301 114011,5 12 55 102 45 111301 115011,6 12 55 102 45 111301 116011,7 12 55 102 45 111301 117011,8 12 55 102 45 111301 118011,9 12 55 102 45 111301 119012,0 12 55 102 45 M14 (14x2) 111301 120012,5 14 60 107 49 M14x1.5 111301 125012,8 14 60 107 49 111301 128013,0 14 60 107 49 111301 130013,5 14 60 107 49 111301 135014,0 14 60 107 49 M16(16x2) 111301 140014,5 16 65 115 51 M16x1.5 111301 145015,0 16 65 115 51 111301 150015,5 16 65 115 51 M18(18x2.5) 111301 155016,0 16 65 115 51 111301 160016,5 18 73 123 58 M18x1.5 111301 165017,0 18 73 123 58 111301 170017,5 18 73 123 58 M20 (20x2.5) 111301 175018,0 18 73 123 58 111301 180018,5 20 79 131 63 M20x1.5 111301 185019,0 20 79 131 63 111301 190019,5 20 79 131 63 M22 (22x2.5) 111301 195020,0 20 79 131 63 111301 20001109superalloys Fe/NiCo-based aluminium copper graphitealloyssteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetart.no.All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-33


N O U VEAU • N UEVO •High-speed drill, solid carbide DIN6537 Ultra-M• NEW • NUOVO •NY<strong>Drilling</strong>• DIN 6537 K and L• Special geometry, facet ground, maximum bit life distance, high process safety• Shank version:• HA with coolant bore, smooth straight shank, DIN 6535 HA• HE with coolant bore, straight shank, DIN 6535 HE• S°= point angle 140°• Cutting material solid carbide, TiAlN-Ultra-M-coated• True running accuracy of the tool when clamped max. 0.02 mm• Especially suitable for Inox and superalloys3 x DDmmD1 h6mmLmmL1mmHA with coolant boreart.no.HE with coolant boreart.no.3,00 6 62 20 111545 0030 111546 00303,10 6 62 20 111545 0031 111546 00313,20 6 62 20 111545 0032 111546 00323,25 6 62 20 111545 1325 111546 13253,30 6 62 20 111545 0033 111546 00333,40 6 62 20 111545 0034 111546 00343,50 6 62 20 111545 0035 111546 00353,60 6 62 20 111545 0036 111546 00363,70 6 62 20 111545 0037 111546 00373,80 6 66 24 111545 0038 111546 00383,90 6 66 24 111545 0039 111546 00394,00 6 66 24 111545 0040 111546 00404,10 6 66 24 111545 0041 111546 00414,20 6 66 24 111545 0042 111546 00424,30 6 66 24 111545 0043 111546 00434,40 6 66 24 111545 0044 111546 00444,50 6 66 24 111545 0045 111546 00454,60 6 66 24 111545 0046 111546 00464,65 6 66 24 111545 1465 111546 14654,70 6 66 24 111545 0047 111546 00474,80 6 66 28 111545 0048 111546 00484,90 6 66 28 111545 0049 111546 00495,00 6 66 28 111545 0050 111546 00505,10 6 66 28 111545 0051 111546 00515,20 6 66 28 111545 0052 111546 00525,30 6 66 28 111545 0053 111546 00535,40 6 66 28 111545 0054 111546 00545,50 6 66 28 111545 0055 111546 00555,55 6 66 28 111545 1555 111546 15555,60 6 66 28 111545 0056 111546 00565,70 6 66 28 111545 0057 111546 00575,80 6 66 28 111545 0058 111546 00585,90 6 66 28 111545 0059 111546 00596,00 6 66 28 111545 0060 111546 00606,10 8 79 34 111545 0061 111546 00616,20 8 79 34 111545 0062 111546 00626,30 8 79 34 111545 0063 111546 00636,40 8 79 34 111545 0064 111546 00646,50 8 79 34 111545 0065 111546 00656,60 8 79 34 111545 0066 111546 00666,70 8 79 34 111545 0067 111546 00676,80 8 79 34 111545 0068 111546 00686,90 8 79 34 111545 0069 111546 00697,00 8 79 34 111545 0070 111546 00707,10 8 79 41 111545 0071 111546 00717,20 8 79 41 111545 0072 111546 00727,30 8 79 41 111545 0073 111546 00737,40 8 79 41 111545 0074 111546 00747,50 8 79 41 111545 0075 111546 00757,60 8 79 41 111545 0076 111546 00767,70 8 79 41 111545 0077 111546 00777,80 8 79 41 111545 0078 111546 00787,90 8 79 41 111545 0079 111546 00798,00 8 79 41 111545 0080 111546 00808,10 10 89 47 111545 0081 111546 00818,20 10 89 47 111545 0082 111546 00828,30 10 89 47 111545 0083 111546 00831111 111110-34DmmD1 h6mmLmmL1mmHA with coolant boreart.no.HE with coolant boreart.no.8,40 10 89 47 111545 0084 111546 00848,50 10 89 47 111545 0085 111546 00858,60 10 89 47 111545 0086 111546 00868,70 10 89 47 111545 0087 111546 00878,80 10 89 47 111545 0088 111546 00888,90 10 89 47 111545 0089 111546 00899,00 10 89 47 111545 0090 111546 00909,10 10 89 47 111545 0091 111546 00919,20 10 89 47 111545 0092 111546 00929,25 10 89 47 111545 1925 111546 19259,30 10 89 47 111545 0093 111546 00939,40 10 89 47 111545 0094 111546 00949,50 10 89 47 111545 0095 111546 00959,60 10 89 47 111545 0096 111546 00969,70 10 89 47 111545 0097 111546 00979,80 10 89 47 111545 0098 111546 00989,90 10 89 47 111545 0099 111546 009910,00 10 89 47 111545 0100 111546 010010,10 12 102 55 111545 0101 111546 010110,20 12 102 55 111545 0102 111546 010210,30 12 102 55 111545 0103 111546 010310,40 12 102 55 111545 0104 111546 010410,50 12 102 55 111545 0105 111546 010510,60 12 102 55 111545 0106 111546 010610,70 12 102 55 111545 0107 111546 010710,80 12 102 55 111545 0108 111546 010810,90 12 102 55 111545 0109 111546 010911,00 12 102 55 111545 0110 111546 011011,10 12 102 55 111545 0111 111546 011111,20 12 102 55 111545 0112 111546 011211,30 12 102 55 111545 0113 111546 011311,40 12 102 55 111545 0114 111546 011411,50 12 102 55 111545 0115 111546 011511,60 12 102 55 111545 0116 111546 011611,70 12 102 55 111545 0117 111546 011711,80 12 102 55 111545 0118 111546 011811,90 12 102 55 111545 0119 111546 011912,00 12 102 55 111545 0120 111546 012012,50 14 107 60 111545 0125 111546 012512,70 14 107 60 111545 0127 111546 012713,00 14 107 60 111545 0130 111546 013013,50 14 107 60 111545 0135 111546 013514,00 14 107 60 111545 0140 111546 014014,50 16 115 65 111545 0145 111546 014515,00 16 115 65 111545 0150 111546 015015,50 16 115 65 111545 0155 111546 015516,00 16 115 65 111545 0160 111546 016016,50 18 123 73 111545 0165 111546 016516,90 18 123 73 111545 0169 111546 016917,00 18 123 73 111545 0170 111546 017017,50 18 123 73 111545 0175 111546 017518,00 18 123 73 111545 0180 111546 018018,50 20 131 79 111545 0185 111546 018518,90 20 131 79 111545 0189 111546 018919,00 20 131 79 111545 0190 111546 019019,50 20 131 79 111545 0195 111546 019520,00 20 131 79 111545 0200 111546 02001111 1111


N O U VEAU • N UEVO •• NEW • NUOVO •NY<strong>Drilling</strong>5 x DDmmmaterialD1 h6mmLmmL1mmHA with coolant boreart.no.HE with coolant boreart.no.3,00 6 66 28 111547 0030 111548 00303,10 6 66 28 111547 0031 111548 00313,20 6 66 28 111547 0032 111548 00323,25 6 66 28 111547 1325 111548 13253,30 6 66 28 111547 0033 111548 00333,40 6 66 28 111547 0034 111548 00343,50 6 66 28 111547 0035 111548 00353,60 6 66 28 111547 0036 111548 00363,70 6 66 28 111547 0037 111548 00373,80 6 74 36 111547 0038 111548 00383,90 6 74 36 111547 0039 111548 00394,00 6 74 36 111547 0040 111548 00404,10 6 74 36 111547 0041 111548 00414,20 6 74 36 111547 0042 111548 00424,30 6 74 36 111547 0043 111548 00434,40 6 74 36 111547 0044 111548 00444,50 6 74 36 111547 0045 111548 00454,60 6 74 36 111547 0046 111548 00464,65 6 74 36 111547 1465 111548 14654,70 6 74 36 111547 0047 111548 00474,80 6 82 44 111547 0048 111548 00484,90 6 82 44 111547 0049 111548 00495,00 6 82 44 111547 0050 111548 00505,10 6 82 44 111547 0051 111548 00515,20 6 82 44 111547 0052 111548 00525,30 6 82 44 111547 0053 111548 00535,40 6 82 44 111547 0054 111548 00545,50 6 82 44 111547 0055 111548 00555,55 6 82 44 111547 1555 111548 15555,60 6 82 44 111547 0056 111548 00565,70 6 82 44 111547 0057 111548 00575,80 6 82 44 111547 0058 111548 00585,90 6 82 44 111547 0059 111548 00596,00 6 82 44 111547 0060 111548 00606,10 8 91 53 111547 0061 111548 00616,20 8 91 53 111547 0062 111548 00626,30 8 91 53 111547 0063 111548 00636,40 8 91 53 111547 0064 111548 00646,50 8 91 53 111547 0065 111548 00656,60 8 91 53 111547 0066 111548 00666,70 8 91 53 111547 0067 111548 00676,80 8 91 53 111547 0068 111548 00686,90 8 91 53 111547 0069 111548 00697,00 8 91 53 111547 0070 111548 00707,10 8 91 53 111547 0071 111548 00717,20 8 91 53 111547 0072 111548 00727,30 8 91 53 111547 0073 111548 00737,40 8 91 53 111547 0074 111548 00747,50 8 91 53 111547 0075 111548 00757,60 8 91 53 111547 0076 111548 00767,70 8 91 53 111547 0077 111548 00777,80 8 91 53 111547 0078 111548 00787,90 8 91 53 111547 0079 111548 00798,00 8 91 53 111547 0080 111548 00808,10 10 103 61 111547 0081 111548 00818,20 10 103 61 111547 0082 111548 00828,30 10 103 61 111547 0083 111548 00838,40 10 103 61 111547 0084 111548 00841111 1111very well suitedwell suitedDmmD1 h6mmLmmL1mmHA with coolant boreart.no.HE with coolant boreart.no.8,50 10 103 61 111547 0085 111548 00858,60 10 103 61 111547 0086 111548 00868,70 10 103 61 111547 0087 111548 00878,80 10 103 61 111547 0088 111548 00888,90 10 103 61 111547 0089 111548 00899,00 10 103 61 111547 0090 111548 00909,10 10 103 61 111547 0091 111548 00919,20 10 103 61 111547 0092 111548 00929,30 10 103 61 111547 0093 111548 00939,40 10 103 61 111547 0094 111548 00949,50 10 103 61 111547 0095 111548 00959,60 10 103 61 111547 0096 111548 00969,70 10 103 61 111547 0097 111548 00979,80 10 103 61 111547 0098 111548 00989,90 10 103 61 111547 0099 111548 009910,00 10 103 61 111547 0100 111548 010010,10 12 118 71 111547 0101 111548 010110,20 12 118 71 111547 0102 111548 010210,30 12 118 71 111547 0103 111548 010310,40 12 118 71 111547 0104 111548 010410,50 12 118 71 111547 0105 111548 010510,60 12 118 71 111547 0106 111548 010610,70 12 118 71 111547 0107 111548 010710,80 12 118 71 111547 0108 111548 010810,90 12 118 71 111547 0109 111548 010911,00 12 118 71 111547 0110 111548 011011,10 12 118 71 111547 0111 111548 011111,20 12 118 71 111547 0112 111548 011211,30 12 118 71 111547 0113 111548 011311,40 12 118 71 111547 0114 111548 011411,50 12 118 71 111547 0115 111548 011511,60 12 118 71 111547 0116 111548 011611,70 12 118 71 111547 0117 111548 011711,80 12 118 71 111547 0118 111548 011811,90 12 118 71 111547 0119 111548 011912,00 12 118 71 111547 0120 111548 012012,20 14 124 77 111547 0122 111548 012212,50 14 124 77 111547 0125 111548 012512,70 14 124 77 111547 0127 111548 012713,00 14 124 77 111547 0130 111548 013013,50 14 124 77 111547 0135 111548 013514,00 14 124 77 111547 0140 111548 014014,20 16 133 83 111547 0142 111548 014214,50 16 133 83 111547 0145 111548 014515,00 16 133 83 111547 0150 111548 015015,50 16 133 83 111547 0155 111548 015516,00 16 133 83 111547 0160 111548 016016,50 18 143 93 111547 0165 111548 016516,90 18 143 93 111547 0169 111548 016917,00 18 143 93 111547 0170 111548 017017,50 18 143 93 111547 0175 111548 017518,00 18 143 93 111547 0180 111548 018018,50 20 153 101 111547 0185 111548 018518,90 20 153 101 111547 0189 111548 018919,00 20 153 101 111547 0190 111548 019019,50 20 153 101 111547 0195 111548 019520,00 20 153 101 111547 0200 111548 02001111 1111steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-35


<strong>Drilling</strong>Solid carbide high-speed drill INOX-DRILL• Short breakage chips• Shank version: cylindrical• For accommodation in power chucks, hydraulic expansion chucks and shrink fi t holders• S°= point angle 140°• Cutting material, solid carbide ultra-fine grain,TiAlN-coatedSpecial flute shape forexcellent chip removal8 x DD m7mmD1 h6mmLmmL1mm art.no.3,0 6 72 34 111542 00303,1 6 72 34 111542 00313,2 6 72 34 111542 00323,3 6 72 34 111542 00333,4 6 72 34 111542 00343,5 6 72 34 111542 00353,6 6 72 34 111542 00363,7 6 72 34 111542 00373,8 6 81 43 111542 00383,9 6 81 43 111542 00394,0 6 81 43 111542 00404,1 6 81 43 111542 00414,2 6 81 43 111542 00424,3 6 81 43 111542 00434,4 6 81 43 111542 00444,5 6 81 43 111542 00454,6 6 81 43 111542 00464,7 6 81 43 111542 00474,8 6 95 57 111542 00484,9 6 95 57 111542 00495,0 6 95 57 111542 00505,1 6 95 57 111542 00515,2 6 95 57 111542 00525,3 6 95 57 111542 00535,4 6 95 57 111542 00545,5 6 95 57 111542 00555,6 6 95 57 111542 00565,7 6 95 57 111542 00575,8 6 95 57 111542 00585,9 6 95 57 111542 00596,0 6 95 57 111542 00601111very well suitedwell suitedmaterialD m7mmD1 h6mmLmmL1mm art.no.6,1 8 114 76 111542 00616,2 8 114 76 111542 00626,3 8 114 76 111542 00636,4 8 114 76 111542 00646,5 8 114 76 111542 00656,6 8 114 76 111542 00666,7 8 114 76 111542 00676,8 8 114 76 111542 00686,9 8 114 76 111542 00697,0 8 114 76 111542 00707,1 8 114 76 111542 00717,2 8 114 76 111542 00727,3 8 114 76 111542 00737,4 8 114 76 111542 00747,5 8 114 76 111542 00757,6 8 114 76 111542 00767,7 8 114 76 111542 00777,8 8 114 76 111542 00787,9 8 114 76 111542 00798,0 8 114 76 111542 00808,1 10 142 95 111542 00818,2 10 142 95 111542 00828,3 10 142 95 111542 00838,4 10 142 95 111542 00848,5 10 142 95 111542 00858,6 10 142 95 111542 00868,7 10 142 95 111542 00878,8 10 142 95 111542 00888,9 10 142 95 111542 00899,0 10 142 95 111542 00909,1 10 142 95 111542 00911111D m7mmD1 h6mmLmmL1mm art.no.9,2 10 142 95 111542 00929,3 10 142 95 111542 00939,4 10 142 95 111542 00949,5 10 142 95 111542 00959,6 10 142 95 111542 00969,7 10 142 95 111542 00979,8 10 142 95 111542 00989,9 10 142 95 111542 009910,0 10 142 95 111542 010010,1 12 162 114 111542 010110,2 12 162 114 111542 010210,3 12 162 114 111542 010310,4 12 162 114 111542 010410,5 12 162 114 111542 010510,6 12 162 114 111542 010610,7 12 162 114 111542 010710,8 12 162 114 111542 010810,9 12 162 114 111542 010911,0 12 162 114 111542 011011,1 12 162 114 111542 011111,2 12 162 114 111542 011211,3 12 162 114 111542 011311,4 12 162 114 111542 011411,5 12 162 114 111542 011511,6 12 162 114 111542 011611,7 12 162 114 111542 011711,8 12 162 114 111542 011811,9 12 162 114 111542 011912,0 12 162 114 111542 01201111steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetwww.atorn.deHigh quality for great performance.Short chucks by ATORN:• high-strength materials• perfect concentricity accuracy• large clamping range• high clamping forceThis is but one example of ATORN‘s high-quality clamping <strong>tools</strong>.10-36


High-speed drill solid carbide DIN6537 type N 140°, 3xD• DIN 6537• Shank design:• HE straight shank DIN 6535 HE• HE with coolant bore, straight shank DIN 6535 HE• HA with coolant bore, smooth straight shank, DIN 6535 HA• with optimized diameter tolerance of the shank for admission in powerchucks and hydraulic expansion chucks• up to 3 x D, with and without coolant bore, short• S°= point angle 140°• Cutting material, solid carbide superfine grain TiAlNplus-coated• 2-facet ground• True running accuracy of the tool when clamped max. 0.02 mmwithout coolant boreHE with coolant boreHA with coolant bore<strong>Drilling</strong>D m7mmD1 h6mmLmmL1mmL3mmHE without coolant boreart.no.HE with coolant boreart.no.HA with coolant boreart.no.3,00 6 62 20 14 111502 0030 111506 0030 111505 00303,10 6 62 20 14 111502 0031 111506 0031 111505 00313,20 6 62 20 14 111502 0032 111506 0032 111505 00323,25 6 62 20 14 111502 0325 111506 0325 111505 03253,30 6 62 20 14 111502 0033 111506 0033 111505 00333,40 6 62 20 14 111502 0034 111506 0034 111505 00343,50 6 62 20 14 111502 0035 111506 0035 111505 00353,60 6 62 20 14 111502 0036 111506 0036 111505 00363,70 6 62 20 14 111502 0037 111506 0037 111505 00373,80 6 66 24 17 111502 0038 111506 0038 111505 00383,90 6 66 24 17 111502 0039 111506 0039 111505 00394,00 6 66 24 17 111502 0040 111506 0040 111505 00404,10 6 66 24 17 111502 0041 111506 0041 111505 00414,20 6 66 24 17 111502 0042 111506 0042 111505 00424,30 6 66 24 17 111502 0043 111506 0043 111505 00434,40 6 66 24 17 111502 0044 111506 0044 111505 00444,50 6 66 24 17 111502 0045 111506 0045 111505 00454,60 6 66 24 17 111502 0046 111506 0046 111505 00464,65 6 66 24 17 111502 0465 111506 0465 111505 04654,70 6 66 24 17 111502 0047 111506 0047 111505 00474,80 6 66 28 20 111502 0048 111506 0048 111505 00484,90 6 66 28 20 111502 0049 111506 0049 111505 00495,00 6 66 28 20 111502 0050 111506 0050 111505 00505,10 6 66 28 20 111502 0051 111506 0051 111505 00515,20 6 66 28 20 111502 0052 111506 0052 111505 00525,30 6 66 28 20 111502 0053 111506 0053 111505 00535,40 6 66 28 20 111502 0054 111506 0054 111505 00545,50 6 66 28 20 111502 0055 111506 0055 111505 00555,55 6 66 28 20 111502 0555 111506 0555 111505 05555,60 6 66 28 20 111502 0056 111506 0056 111505 00565,70 6 66 28 20 111502 0057 111506 0057 111505 00575,80 6 66 28 20 111502 0058 111506 0058 111505 00585,90 6 66 28 20 111502 0059 111506 0059 111505 00596,00 6 66 28 20 111502 0060 111506 0060 111505 00606,10 8 79 34 24 111502 0061 111506 0061 111505 00616,20 8 79 34 24 111502 0062 111506 0062 111505 00626,30 8 79 34 24 111502 0063 111506 0063 111505 00636,40 8 79 34 24 111502 0064 111506 0064 111505 00646,50 8 79 34 24 111502 0065 111506 0065 111505 00656,60 8 79 34 24 111502 0066 111506 0066 111505 00666,70 8 79 34 24 111502 0067 111506 0067 111505 00676,80 8 79 34 24 111502 0068 111506 0068 111505 00686,90 8 79 34 24 111502 0069 111506 0069 111505 00697,00 8 79 34 24 111502 0070 111506 0070 111505 00707,10 8 79 41 29 111502 0071 111506 0071 111505 00717,20 8 79 41 29 111502 0072 111506 0072 111505 00727,30 8 79 41 29 111502 0073 111506 0073 111505 00737,40 8 79 41 29 111502 0074 111506 0074 111505 00747,50 8 79 41 29 111502 0075 111506 0075 111505 00757,60 8 79 41 29 111502 0076 111506 0076 111505 00767,70 8 79 41 29 111502 0077 111506 0077 111505 00777,80 8 79 41 29 111502 0078 111506 0078 111505 00787,90 8 79 41 29 111502 0079 111506 0079 111505 00797,94 8 79 41 29 111506 0794 111505 07948,00 8 79 41 29 111502 0080 111506 0080 111505 00808,10 10 89 47 35 111502 0081 111506 0081 111505 00811111 1111 1111All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-37


<strong>Drilling</strong>materialD m7mmD1 h6mmLmmL1mmL3mmHE without coolant boreart.no.HE with coolant boreart.no.HA with coolant boreart.no.8,20 10 89 47 35 111502 0082 111506 0082 111505 00828,30 10 89 47 35 111502 0083 111506 0083 111505 00838,40 10 89 47 35 111502 0084 111506 0084 111505 00848,50 10 89 47 35 111502 0085 111506 0085 111505 00858,60 10 89 47 35 111502 0086 111506 0086 111505 00868,70 10 89 47 35 111502 0087 111506 0087 111505 00878,80 10 89 47 35 111502 0088 111506 0088 111505 00888,90 10 89 47 35 111502 0089 111506 0089 111505 00899,00 10 89 47 35 111502 0090 111506 0090 111505 00909,10 10 89 47 35 111502 0091 111506 0091 111505 00919,20 10 89 47 35 111502 0092 111506 0092 111505 00929,30 10 89 47 35 111502 0093 111506 0093 111505 00939,40 10 89 47 35 111502 0094 111506 0094 111505 00949,50 10 89 47 35 111502 0095 111506 0095 111505 00959,60 10 89 47 35 111502 0096 111506 0096 111505 00969,70 10 89 47 35 111502 0097 111506 0097 111505 00979,80 10 89 47 35 111502 0098 111506 0098 111505 00989,90 10 89 47 35 111502 0099 111506 0099 111505 009910,00 10 89 47 35 111502 0100 111506 0100 111505 010010,10 12 102 55 40 111502 0101 111506 0101 111505 010110,20 12 102 55 40 111502 0102 111506 0102 111505 010210,30 12 102 55 40 111502 0103 111506 0103 111505 010310,40 12 102 55 40 111502 0104 111506 0104 111505 010410,50 12 102 55 40 111502 0105 111506 0105 111505 010510,60 12 102 55 40 111502 0106 111506 0106 111505 010610,70 12 102 55 40 111502 0107 111506 0107 111505 010710,80 12 102 55 40 111502 0108 111506 0108 111505 010810,90 12 102 55 40 111502 0109 111506 0109 111505 010911,00 12 102 55 40 111502 0110 111506 0110 111505 011011,10 12 102 55 40 111502 0111 111506 0111 111505 011111,20 12 102 55 40 111502 0112 111506 0112 111505 011211,30 12 102 55 40 111502 0113 111506 0113 111505 011311,40 12 102 55 40 111502 0114 111506 0114 111505 011411,50 12 102 55 40 111502 0115 111506 0115 111505 011511,60 12 102 55 40 111502 0116 111506 0116 111505 011611,70 12 102 55 40 111502 0117 111506 0117 111505 011711,80 12 102 55 40 111502 0118 111506 0118 111505 011811,90 12 102 55 40 111502 0119 111506 0119 111505 011912,00 12 102 55 40 111502 0120 111506 0120 111505 012012,10 14 107 60 43 111502 012112,50 14 107 60 43 111502 0125 111506 0125 111505 012512,80 14 107 60 43 111502 0128 111506 0128 111505 012813,00 14 107 60 43 111502 0130 111506 0130 111505 013013,50 14 107 60 43 111502 0135 111506 0135 111505 013513,80 14 107 60 43 111502 0138 111506 0138 111505 013814,00 14 107 60 43 111502 0140 111506 0140 111505 014014,20 16 115 65 45 111502 0142 111506 0142 111505 014214,50 16 115 65 45 111502 0145 111506 0145 111505 014514,80 16 115 65 45 111502 0148 111506 0148 111505 014815,00 16 115 65 45 111502 0150 111506 0150 111505 015015,10 16 115 65 45 111502 0151 111506 0151 111505 015115,50 16 115 65 45 111502 0155 111506 0155 111505 015515,80 16 115 65 45 111502 0158 111506 0158 111505 015816,00 16 115 65 45 111502 0160 111506 0160 111505 016016,50 18 123 73 51 111502 0165 111506 0165 111505 016517,00 18 123 73 51 111502 0170 111506 0170 111505 017017,50 18 123 73 51 111502 0175 111506 0175 111505 017518,00 18 123 73 51 111502 0180 111506 0180 111505 018018,50 20 131 79 55 111502 0185 111506 0185 111505 018519,00 20 131 79 55 111502 0190 111506 0190 111505 019019,50 20 131 79 55 111502 0195 111506 0195 111505 019520,00 20 131 79 55 111502 0200 111506 0200 111505 02001111 1111 1111very well suitedwell suitedwithout coolant boreHE with coolant boreHA with coolant boresteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-38


High-speed drill solid carbide DIN6537 type N 140°, 5xD• HE with coolant bore, straight shank DIN 6535 HE• HA with coolant bore, smooth straight shank, DIN 6535 HA• with optimized diameter tolerance of the shank for admissionin power chucks and hydraulic expansion chucks• up to 5 x D, with coolant bore• Cutting material, solid carbide superfine grain TiAlNplus-coatedD m7 D1 h6 L L1 L3 HE with coolant bore HA with coolant bore• True running accuracy of the tool when clamped max. 0.02 mmmm mm mm mm mm art.no.art.no.3,00 6 66 28 23 111511 0030 111510 00303,10 6 66 28 23 111511 0031 111510 00313,20 6 66 28 23 111511 0032 111510 00323,25 6 66 28 23 111511 0325 111510 03253,30 6 66 28 23 111511 0033 111510 00333,40 6 66 28 23 111511 0034 111510 00343,50 6 66 28 23 111511 0035 111510 00353,60 6 66 28 23 111511 0036 111510 00363,70 6 66 28 23 111511 0037 111510 00373,80 6 74 36 29 111511 0038 111510 00383,90 6 74 36 29 111511 0039 111510 00394,00 6 74 36 29 111511 0040 111510 00404,10 6 74 36 29 111511 0041 111510 00414,20 6 74 36 29 111511 0042 111510 00424,30 6 74 36 29 111511 0043 111510 00434,40 6 74 36 29 111511 0044 111510 00444,50 6 74 36 29 111511 0045 111510 00454,60 6 74 36 29 111511 0046 111510 00464,65 6 74 36 29 111511 0465 111510 04654,70 6 74 36 29 111511 0047 111510 00474,80 6 82 44 35 111511 0048 111510 00484,90 6 82 44 35 111511 0049 111510 00495,00 6 82 44 35 111511 0050 111510 00505,10 6 82 44 35 111511 0051 111510 00515,20 6 82 44 35 111511 0052 111510 00525,30 6 82 44 35 111511 0053 111510 00535,40 6 82 44 35 111511 0054 111510 00545,50 6 82 44 35 111511 0055 111510 00555,55 6 82 44 35 111511 0555 111510 05555,60 6 82 44 35 111511 0056 111510 00565,70 6 82 44 35 111511 0057 111510 00575,80 6 82 44 35 111511 0058 111510 00585,90 6 82 44 35 111511 0059 111510 00596,00 6 82 44 35 111511 0060 111510 00606,10 8 91 53 43 111511 0061 111510 00616,20 8 91 53 43 111511 0062 111510 00626,30 8 91 53 43 111511 0063 111510 00636,40 8 91 53 43 111511 0064 111510 00646,50 8 91 53 43 111511 0065 111510 00656,60 8 91 53 43 111511 0066 111510 00666,70 8 91 53 43 111511 0067 111510 00676,80 8 91 53 43 111511 0068 111510 00686,90 8 91 53 43 111511 0069 111510 00697,00 8 91 53 43 111511 0070 111510 00707,10 8 91 53 43 111511 0071 111510 00717,20 8 91 53 43 111511 0072 111510 00727,30 8 91 53 43 111511 0073 111510 00737,40 8 91 53 43 111511 0074 111510 00747,50 8 91 53 43 111511 0075 111510 00757,60 8 91 53 43 111511 0076 111510 00767,70 8 91 53 43 111511 0077 111510 00777,80 8 91 53 43 111511 0078 111510 00787,90 8 91 53 43 111511 0079 111510 00798,00 8 91 53 43 111511 0080 111510 00808,10 10 103 61 49 111511 0081 111510 00818,20 10 103 61 49 111511 0082 111510 00828,30 10 103 61 49 111511 0083 111510 00838,40 10 103 61 49 111511 0084 111510 00848,50 10 103 61 49 111511 0085 111510 00858,60 10 103 61 49 111511 0086 111510 00861111 1111D m7mmD1 h6mmLmmL1mmL3mmHE with coolant boreart.no.HA with coolant boreart.no.8,70 10 103 61 49 111511 0087 111510 00878,80 10 103 61 49 111511 0088 111510 00888,90 10 103 61 49 111511 0089 111510 00899,00 10 103 61 49 111511 0090 111510 00909,10 10 103 61 49 111511 0091 111510 00919,20 10 103 61 49 111511 0092 111510 00929,30 10 103 61 49 111511 0093 111510 00939,40 10 103 61 49 111511 0094 111510 00949,50 10 103 61 49 111511 0095 111510 00959,60 10 103 61 49 111511 0096 111510 00969,70 10 103 61 49 111511 0097 111510 00979,80 10 103 61 49 111511 0098 111510 00989,90 10 103 61 49 111511 0099 111510 009910,00 10 103 61 49 111511 0100 111510 010010,10 12 118 71 56 111511 0101 111510 010110,20 12 118 71 56 111511 0102 111510 010210,30 12 118 71 56 111511 0103 111510 010310,40 12 118 71 56 111511 0104 111510 010410,50 12 118 71 56 111511 0105 111510 010510,60 12 118 71 56 111511 0106 111510 010610,70 12 118 71 56 111511 0107 111510 010710,80 12 118 71 56 111511 0108 111510 010810,90 12 118 71 56 111511 0109 111510 010911,00 12 118 71 56 111511 0110 111510 011011,10 12 118 71 56 111511 0111 111510 011111,20 12 118 71 56 111511 0112 111510 011211,30 12 118 71 56 111511 0113 111510 011311,40 12 118 71 56 111511 0114 111510 011411,50 12 118 71 56 111511 0115 111510 011511,60 12 118 71 56 111511 0116 111510 011611,70 12 118 71 56 111511 0117 111510 011711,80 12 118 71 56 111511 0118 111510 011811,90 12 118 71 56 111511 0119 111510 011912,00 12 118 71 56 111511 0120 111510 012012,10 12 124 77 58 111511 0121 111510 012112,20 12 124 77 58 111511 0122 111510 012212,50 14 124 77 60 111511 0125 111510 012512,80 14 124 77 60 111511 0128 111510 012813,00 14 124 77 60 111511 0130 111510 013013,50 14 124 77 60 111511 0135 111510 013513,80 14 124 77 60 111511 0138 111510 013814,00 14 124 77 60 111511 0140 111510 014014,10 14 124 77 60 111511 0141 111510 014114,20 14 124 77 60 111511 0142 111510 014214,50 16 133 83 63 111511 0145 111510 014514,80 16 133 83 63 111511 0148 111510 014815,00 16 133 83 63 111511 0150 111510 015015,10 16 133 83 63 111511 0151 111510 015115,50 16 133 83 63 111511 0155 111510 015515,80 16 133 83 63 111511 0158 111510 015816,00 16 133 83 63 111511 0160 111510 016016,50 18 143 93 71 111511 0165 111510 016517,00 18 143 93 71 111511 0170 111510 017017,50 18 143 93 71 111511 0175 111510 017518,00 18 143 93 71 111511 0180 111510 018018,50 20 153 101 77 111511 0185 111510 018519,00 20 153 101 77 111511 0190 111510 019019,50 20 153 101 77 111511 0195 111510 019520,00 20 153 101 77 111511 0200 111510 02001111 1111<strong>Drilling</strong>materialvery well suitedwell suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-39


High-speed drill solid carbide DIN6537 type N 140°, 7xD<strong>Drilling</strong>• Shank design:• HE with coolant bore, straight shank DIN 6535 HE• HA with coolant bore, smooth straight shank, DIN 6535 HA• with optimized diameter tolerance of the shank for admission inpower chucks and hydraulic expansion chucks• up to 7 x D, with coolant bore• S°= point angle 140°• Cutting material, solid carbide superfine grain TiAlNplus-coated• Good self-centring properties and generation of short chips• Use on powerful machines with low-play spindles, tool holding fi xture with exact alignment• True running accuracy of the tool when clamped max. 0.02 mmHA with coolant boreHE with coolant borematerialD m7mmD1 h6mmLmmL1mmHA with coolant boreart.no.HE with coolant boreart.no.3,0 6 70 30 111513 0030 111519 00303,1 6 70 30 111513 0031 111519 00313,2 6 70 30 111513 0032 111519 00323,3 6 70 30 111513 0033 111519 00333,4 6 75 35,5 111513 0034 111519 00343,5 6 75 35,5 111513 0035 111519 00353,6 6 75 35,5 111513 0036 111519 00363,7 6 75 35,5 111513 0037 111519 00373,8 6 75 37,5 111513 0038 111519 00383,9 6 75 37,5 111513 0039 111519 00394,0 6 75 37,5 111513 0040 111519 00404,1 6 75 37,5 111513 0041 111519 00414,2 6 75 37,5 111513 0042 111519 00424,3 6 85 45 111513 0043 111519 00434,4 6 85 45 111513 0044 111519 00444,5 6 85 45 111513 0045 111519 00454,6 6 85 45 111513 0046 111519 00464,7 6 85 45 111513 0047 111519 00474,8 6 90 50 111513 0048 111519 00484,9 6 90 50 111513 0049 111519 00495,0 6 90 50 111513 0050 111519 00505,1 6 90 50 111513 0051 111519 00515,2 6 90 50 111513 0052 111519 00525,3 6 90 50 111513 0053 111519 00535,4 6 97 57 111513 0054 111519 00545,5 6 97 57 111513 0055 111519 00555,7 6 97 57 111513 0057 111519 00575,8 6 97 57 111513 0058 111519 00585,9 6 97 57 111513 0059 111519 00596,0 6 97 57 111513 0060 111519 00606,2 8 106 66 111513 0062 111519 00626,3 8 106 66 111513 0063 111519 00636,5 8 106 66 111513 0065 111519 00656,6 8 106 66 111513 0066 111519 00666,7 8 106 66 111513 0067 111519 00676,8 8 106 66 111513 0068 111519 00686,9 8 116 76 111513 0069 111519 00697,0 8 116 76 111513 0070 111519 00707,1 8 116 76 111513 0071 111519 00717,2 8 116 76 111513 0072 111519 00727,5 8 116 76 111513 0075 111519 00757,6 8 116 76 111513 0076 111519 00767,7 8 116 76 111513 0077 111519 00777,8 8 116 76 111513 0078 111519 00788,0 8 116 76 111513 0080 111519 00801110 1110very well suitedwell suitedD m7mmD1 h6mmLmmL1mmHA with coolant boreart.no.HE with coolant boreart.no.8,1 10 131 87 111513 0081 111519 00818,2 10 131 87 111513 0082 111519 00828,4 10 131 87 111513 0084 111519 00848,5 10 131 87 111513 0085 111519 00858,6 10 131 87 111513 0086 111519 00868,7 10 131 87 111513 0087 111519 00878,8 10 131 87 111513 0088 111519 00889,0 10 131 87 111513 0090 111519 00909,1 10 139 95 111513 0091 111519 00919,2 10 139 95 111513 0092 111519 00929,3 10 139 95 111513 0093 111519 00939,4 10 139 95 111513 0094 111519 00949,5 10 139 95 111513 0095 111519 00959,7 10 139 95 111513 0097 111519 00979,8 10 139 95 111513 0098 111519 00989,9 10 139 95 111513 0099 111519 009910,0 10 139 95 111513 0100 111519 010010,2 12 155 106 111513 0102 111519 010210,5 12 155 106 111513 0105 111519 010510,8 12 155 106 111513 0108 111519 010811,0 12 155 106 111513 0110 111519 011011,2 12 163 114 111513 0112 111519 011211,5 12 163 114 111513 0115 111519 011511,8 12 163 114 111513 0118 111519 011812,0 12 163 114 111513 0120 111519 012012,2 14 182 133 111513 0122 111519 012212,5 14 182 133 111513 0125 111519 012512,7 14 182 133 111513 0127 111519 012713,0 14 182 133 111513 0130 111519 013013,5 14 182 133 111513 0135 111519 013514,0 14 182 133 111513 0140 111519 014014,2 16 204 152 111513 0142 111519 014214,5 16 204 152 111513 0145 111519 014515,0 16 204 152 111513 0150 111519 015015,5 16 204 152 111513 0155 111519 015516,0 16 204 152 111513 0160 111519 016016,5 18 223 171 111513 0165 111519 016517,0 18 223 171 111513 0170 111519 017017,5 18 223 171 111513 0175 111519 017518,0 18 223 171 111513 0180 111519 018018,5 20 244 190 111513 0185 111519 018519,0 20 244 190 111513 0190 111519 019019,5 20 244 190 111513 0195 111519 019520,0 20 244 190 111513 0200 111519 02001110 1110steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-40


High-speed drill solid carbide DIN6537 type N 140°, 12xD• Shank version: HA with coolant bore, smooth straight shank, DIN 6535 HA• with optimized diameter tolerance of the shank for admission in power chucks andhydraulic expansion chucks• up to 12 x D, with coolant bore• 2 facet ground, S°= point angle 140°• Cutting material, solid carbide ultra-fine grain TiAlN-coated• Also for tough and long-chipping cutting material reliable chip fl ow due to adapteddrill profi le and large chip chambers• four guide chamfers for exactly aligned bores with good surface qualities• True running accuracy of the tool when clamped max. 0.02 mm• Pilot hole recommended<strong>Drilling</strong>materialD m7mmD1 h6mmLmmL1mm art.no.4,0 6 102 64 111514 00404.2 6 102 64 111514 00424.3 6 102 64 111514 00434.5 6 102 64 111514 00455,0 6 116 78 111514 00505.5 6 116 78 111514 00556,0 6 116 78 111514 00606.5 8 146 108 111514 00656.8 8 146 108 111514 00687,0 8 146 108 111514 00707.5 8 146 108 111514 00758,0 8 146 108 111514 00808.5 10 162 120 111514 00859,0 10 162 120 111514 00909.5 10 162 120 111514 009510,0 10 162 120 111514 010010,2 12 204 156 111514 01021110very well suitedwell suitedD m7mmD1 h6mmLmmL1mm art.no.10,5 12 204 156 111514 010511,0 12 204 156 111514 011011,5 12 204 156 111514 011512,0 12 204 156 111514 012012,5 14 230 182 111514 012512,7 14 230 182 111514 012713,0 14 230 182 111514 013013,5 14 230 182 111514 013514,0 14 230 182 111514 014014,5 16 260 208 111514 014515,0 16 260 208 111514 015016,0 16 260 208 111514 016016,5 18 285 234 111514 016517,0 18 285 234 111514 017018,0 18 285 234 111514 018019,0 20 310 258 111514 019020,0 20 310 258 111514 02001110superalloys Fe/NiCo-based aluminium copper graphitealloyssteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetwww.atorn.deHigh quality for great performance.Solid carbide high-performance twist drills by ATORN:• solid carbide Ultra-finest grit• longest service life• innovative centring geometry• internal coolant flow• precision-ground for safest machiningThis is but one example of ATORN‘s high-quality drilling <strong>tools</strong>.All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-41


Solid carbide high-speed drill FTO-GDXL<strong>Drilling</strong>• Shank design:• HA with coolant bore, smooth straight shank, DIN 6535 HAoptimized diameter tolerance of the shank, shrink fi t holder suitedas holding fi xture• up to 10 x D, with coolant bore• S°= point angle 140°• Cutting material solid carbide, TiAlN-coated• Powerful drill for the cost-effi cient manufacture of deep bores• optimum chip removal due to special cutting geometry and large chip spaces• True running accuracy of the tool when clamped max. 0.02 mm• Pilot hole recommended• Versions 15 x D, 20 x D and 30 x D available on request!materialDmmD1mmLmmL1mm art.no.2,0 3 75 26 111515 00202,1 3 75 33 111515 00212,2 3 75 33 111515 00222,3 3 75 33 111515 00232,4 3 75 33 111515 00242,5 3 75 33 111515 00252,6 3 90 40 111515 00262,7 3 90 40 111515 00272,8 3 90 40 111515 00282,9 3 90 40 111515 00293,0 3 90 40 111515 00303,1 4 100 45 111515 00313,2 4 100 45 111515 00323,3 4 100 45 111515 00333,4 4 100 50 111515 00343,5 4 100 50 111515 00353,6 4 100 50 111515 00363,7 4 100 50 111515 00373,8 4 100 50 111515 00383,9 4 100 50 111515 00394,0 4 100 50 111515 00404,1 6 115 55 111515 00414,2 6 115 55 111515 00424,3 6 115 60 111515 00434,4 6 115 60 111515 00444,5 6 115 60 111515 00454,6 6 115 60 111515 00464,7 6 115 65 111515 00474,8 6 115 65 111515 00484,9 6 115 65 111515 00495,0 6 115 65 111515 00505,1 6 128 70 111515 00515,2 6 128 70 111515 00525,3 6 128 70 111515 00535,4 6 128 78 111515 00545,5 6 128 78 111515 00555,6 6 128 78 111515 00565,7 6 128 78 111515 00575,8 6 128 78 111515 00585,9 6 128 78 111515 00596,0 6 128 78 111515 00606,1 8 140 87 111515 00616,2 8 140 87 111515 00626,3 8 140 87 111515 00636,4 8 140 87 111515 00646,5 8 140 87 111515 00656,6 8 140 87 111515 00666,7 8 140 87 111515 00676,8 8 140 90 111515 00686,9 8 140 90 111515 00697,0 8 140 90 111515 00701107very well suitedwell suitedDmmD1mmLmmL1mm art.no.7,1 8 155 100 111515 00717,2 8 155 100 111515 00727,3 8 155 100 111515 00737,4 8 155 100 111515 00747,5 8 155 100 111515 00757,6 8 155 105 111515 00767,7 8 155 105 111515 00777,8 8 155 105 111515 00787,9 8 155 105 111515 00798,0 8 155 105 111515 00808,1 10 165 110 111515 00818,2 10 165 110 111515 00828,3 10 165 110 111515 00838,4 10 165 110 111515 00848,5 10 165 110 111515 00858,6 10 165 115 111515 00868,7 10 165 115 111515 00878,8 10 165 115 111515 00888,9 10 165 115 111515 00899,0 10 165 115 111515 00909,1 10 190 125 111515 00919,2 10 190 125 111515 00929,3 10 190 125 111515 00939,4 10 190 125 111515 00949,5 10 190 125 111515 00959,6 10 190 130 111515 00969,7 10 190 130 111515 00979,8 10 190 130 111515 00989,9 10 190 130 111515 009910,0 10 190 130 111515 010010,1 12 205 140 111515 010110,2 12 205 140 111515 010210,3 12 205 140 111515 010310,4 12 205 140 111515 010410,5 12 205 140 111515 010510,6 12 205 140 111515 010610,7 12 205 140 111515 010710,8 12 205 145 111515 010810,9 12 205 145 111515 010911,0 12 205 145 111515 011011,1 12 215 155 111515 011111,2 12 215 155 111515 011211,3 12 215 155 111515 011311,4 12 215 155 111515 011411,5 12 215 155 111515 011511,6 12 215 155 111515 011611,7 12 215 155 111515 011711,8 12 215 155 111515 011811,9 12 215 155 111515 011912,0 12 215 155 111515 01201107steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-42


Solid carbide high-speed drill ALUSPEED• Shank version: Cylindrical, DIN 6535HA• twisted coolant bore• S°= point angle 135°• Spiral angle 15°• 6-fold guide chamfer ensures very high alignmentprecision and stabilization of the drill• Cutting material solid carbide, superfine grain,aluminium CC -coated• <strong>Drilling</strong> depth 5 x D and 8 x DEnables cutting data of up to Vc = 330 m/min.with maximum service life and process stabilityAbsolute positioning precisionwith six marginsExtremely low-frictionaluminium CC coating<strong>Drilling</strong>Product video onwww.sartorius-werkzeuge.deInternal cooling15º helix angle forprocess-safe chip removal5 x DD m7mmD1 h6mmL1mmLmm art.no.2,5 4 21 57 111400 00252,8 4 21 57 111400 00283,0 6 28 66 111400 00303,3 6 28 66 111400 00333,5 6 28 66 111400 00353,8 6 36 74 111400 00384,0 6 36 74 111400 00404,2 6 36 74 111400 00424,5 6 36 74 111400 00454,6 6 36 74 111400 00464,8 6 44 82 111400 00485,0 6 44 82 111400 00505,5 6 44 82 111400 00555,8 6 44 82 111400 00581148D m7mmD1 h6mmL1mmLmm art.no.6,0 6 44 82 111400 00606,5 8 53 91 111400 00656,8 8 53 91 111400 00687,0 8 53 91 111400 00707,4 8 53 91 111400 00747,8 8 53 91 111400 00788,0 8 53 91 111400 00808,5 10 61 103 111400 00858,8 10 61 103 111400 00889,0 10 61 103 111400 00909,35 10 61 103 111400 00939,80 10 61 103 111400 009810,0 10 61 103 111400 010010,2 12 71 118 111400 01021148D m7mmD1 h6mmL1mmLmm art.no.11,0 12 71 118 111400 011011,2 12 71 118 111400 011212,0 12 71 118 111400 012013,0 14 77 124 111400 013014,0 14 77 124 111400 014015,0 16 83 133 111400 015015,5 16 83 133 111400 015516,0 16 83 133 111400 016017,0 18 93 143 111400 017017,5 18 93 143 111400 017518,0 18 93 143 111400 018020,0 20 101 153 111400 020011488 x DD m7mmD1 h6mmL1mmLmm art.no.2,5 4 30 66 111405 00253,0 6 34 72 111405 00303,3 6 34 72 111405 00333,5 6 34 72 111405 00353,8 6 43 81 111405 00384,0 6 43 81 111405 00404,2 6 43 81 111405 00424,5 6 43 81 111405 00454,6 6 43 81 111405 00464,8 6 57 95 111405 00485,0 6 57 95 111405 00505,5 6 57 95 111405 00555,8 6 57 95 111405 00581148very well suitedwell suitedmaterialD m7mmD1 h6mmL1mmLmm art.no.6,0 6 57 95 111405 00606,5 8 76 114 111405 00656,8 8 76 114 111405 00687,0 8 76 114 111405 00707,4 8 76 114 111405 00747,8 8 76 114 111405 00788,0 8 76 114 111405 00808,5 10 95 142 111405 00858,8 10 95 142 111405 00889,0 10 95 142 111405 00909,8 10 95 142 111405 009810,0 10 95 142 111405 010010,2 12 114 162 111405 01021148D m7mmD1 h6mmL1mmLmm art.no.11,0 12 114 162 111405 011012,0 12 114 162 111405 012013,0 14 131 178 111405 013014,0 14 131 178 111405 014015,0 16 152 203 111405 015015,5 16 152 203 111405 015516,0 16 152 203 111405 016017,0 18 171 222 111405 017017,5 18 171 222 111405 017518,0 18 171 222 111405 018020,0 20 190 243 111405 02001148steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-43


Step drill<strong>Drilling</strong>• Straight shank• conical jacket bevel• Normal point angle (118°)• Point thinning according to DIN 1412 form A• Lateral rake angle, centre thickness, centre rise and fl ute form normal• Ø tolerance h8, other design features according to DIN 1414• Note: The cutting speed depends on the large diameter, the feed rate, however, on the small diameter.• HSS 90° DIN 8378• For tapping holes• according to DIN 336, Part 1, and 90º countersinking in through-holes accordingto DIN/ISO 273 (economic manufacture)for threadD h9mmD2 h8mmL5mmL1mmLmmCountersink angle 90°art.no.M 3 3,4 2.5 8.8 39 70 102101 0030M 4 4,5 3.3 11.4 47 80 102101 0040M 5 5,5 4.2 13.6 57 93 102101 0050M 6 6,6 5 16.5 63 101 102101 0060M 8 9,0 6.8 21 81 125 102101 0080M 10 11,0 8.5 25.5 94 142 102101 01001105• HSS 90° DIN 8374• for through-holes,• Counterbore fine• for producing through-holes according to DIN/ISO 273 and screw head counterbores 90º,forms A and B according to DIN 74, Part 1, for screws according to DIN 963 and DIN 964for threadD h9mmD2 h8mmL5mmL1mmLmmCountersink angle 90°art.no.M 3 6,0 3.2 9 63 101 102102 0030M 4 8,0 4.3 11 75 117 102102 0040M 5 10,0 5.3 13 87 133 102102 0050M 6 11,5 6.4 15 94 142 102102 0060M 8 15,0 8.4 19 114 169 102102 0080M 10 19,0 10.5 23 135 198 102102 01001105• HSS 180° DIN 8376• for through-holes,• Counterbore medium• for producing through-holes according to DIN/ISO 273 and screw head counterbores 180º moreeconomically, forms H, J and K according to DIN 74, Part 2, for screws according to DIN 84, DIN 912,DIN 7513 and DIN 7984materialfor threadD h9mmD2 h8mmL5mmL1mmLmmCountersink angle 180°art.no.M 3 6,0 3.4 9 57 93 102103 0030M 4 8,0 4.5 11 75 117 102103 0040M 5 10,0 5.5 13 87 133 102103 0050M 6 11,0 6.6 15 94 142 102103 0060M 8 15,0 9 19 114 169 102103 0080M 10 18,0 11 23 130 191 102103 01001105very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-44


Solid carbide short step drill• Straight shank according to DIN 6535-HA• Right hand cutting• Point angle 140°• Ø tolerance h8• Cutting material solid carbide K40F, TiAlN-coated• For the economic manufacture of bores and countersinks in one work step• Tight circular true concentricity tolerance for exact alignment• especially suited for NC machines and automatic units• Note: The cutting speed depends on the large diameter, the feed rate, however, on the small diameter.<strong>Drilling</strong>• VHM 90°• for core hole drilling• Step length according to DIN 8378• For screw through-holes DIN-ISO 273 and countersinks according to DIN 74-1Countersunk bolts in compliance with ISO 2009-2010 and DIN 963-966for threadD h8mmD2 h8mmL5mmL1mmLmmD1mmCountersink angle 90°art.no.M 3 3,4 2.5 8.8 20 62 6 102201 0003M 4 4,5 3.3 11.4 24 66 6 102201 0004M 5 5,5 4.2 13.6 28 66 6 102201 0005M 6 6,6 5 16.5 34 79 8 102201 0006M 8 9 6.8 21 47 89 10 102201 0008M 10 11 8.5 25.5 55 102 12 102201 0010M 12 13,5 10.2 30 60 107 14 102201 00121109• VHM 180°• for through-holes,• Step length according to DIN 8376• For screw through-holes according to DIN-ISO 273 and countersinks according to DIN 74,Bl.2 Form H, J and K, medium design; for screws according to DIN 912, 6912 and 7984,ISO 1207 (DIN 84)materialfor threadD h8mmD2 h8mmL5mmL1mmLmmD1mmCountersink angle 180°art.no.M 3 6,0 3.4 9 28 64 6 102210 0003M 4 8,0 4.5 11 37 79 8 102210 0004M 5 10,0 5.5 13 43 89 10 102210 0005M 6 11,0 6.6 15 55 102 12 102210 0006M 8 15,0 9 19 60 115 16 102210 0008M 10 18,0 11 23 62 123 18 102210 0010M 12 20,0 13.5 27 66 131 20 102210 00121109very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSafety at the workplacePlease protect your eyes, hearing and respiratory organs!Ear protectorsSafety gogglesatBreathing protection apparStartingon90-48pageStartingon90-45pageStartingonpage90-50usAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-45


Precision cone drill bit<strong>Drilling</strong>• Point angle 118°• Total angle 20°• Right hand cutting• Cylindrically ground / milled chip fl ute for absolutely smooth running and high cutting power• Cutting material HSS, HSS TiN• Burr-free drilling and boring of sheet metal, pipes and sectionsNo. 0 No. 1 No. 2No. 3 No. 4No. 6No.DmmLmmD1mmart.no.HSSHSS TiN-coatedart.no.0 3,0 - 14,0 58 6 102560 0314 102565 03141 8,0 - 20,0 66 8 102560 0820 102565 08202 16,0 - 30,5 77 9 102560 1630 102565 16303 26,0 - 40,0 90 9 102560 2640 102565 26404 36,0 - 50,0 87 9 102560 3650 102565 36506 4,0 - 30,5 90 10 102560 0430 102565 04301114 1114Kitsmaterialvery well suitedwell suitedContentsHSSTiN-coatedart.no.art.no.Cone drill bit no. 0,1,2 1 Tin of cutting paste 102561 0001 102566 00011114 1114steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetUniversal step drills<strong>Drilling</strong> and deburringin one work step• two cutting edges and fi xed centring point• twisted chip fl ute• The exact bore diameter results from the cylindricalgraduation, the polished section of the next stagedeburs the next smaller bore diameter, point thinningaccording to DIN 1412 C• Cutting material HSS, HSS TiN• especially suited for use on hand drills when drillingthin materials; no need for pre-drilling or centrepunching even with curved surfacesNo. 1 No. 2No. 3KitsNo.DmmLmmNumber of stepsD1mmart.no.HSSHSS-TiN Coatedart.no.1 4,0 - 12,0 79 9 6 102550 0001 102552 00012 6,0 - 20,0 71 8 9 102550 0002 102552 00023 6,0 - 30,0 100 13 10 102550 0003 102552 00031114 1114ContentsHSSHSS-TiN Coatedart.no.art.no.Each 1 step drill no. 1 - 3 102551 0001 102553 00011114 1114materialvery well suitedwell suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-46


Carbide masonry drill• Robust masonry and concrete drill• very high drilling performance and service life due to rotary hammer drill head design• Low-stress soldering method at 1100 °C• Straight shank• U-shaped fl ute• Cutting material made of hardened and tempered special steel with carbide cutting edge• for use primarily in hammer drills for drilling in concrete and masonry<strong>Drilling</strong>DmmL1mmLmm art.no.3,0 30 60 5 110130 00304,0 50 85 5 110130 00404,5 50 85 5 110130 00455,0 50 85 5 110130 00506,0 60 100 5 110130 00606,5 60 100 5 110130 00657,0 60 100 5 110130 00708,0 80 120 5 110130 00809,0 80 120 5 110130 00901115Kit in plastic cartridgeDmmL1mmLmm art.no.10,0 80 120 5 110130 010011,0 85 150 1 110130 011012,0 85 150 1 110130 012013,0 90 150 1 110130 013014,0 90 150 1 110130 014015,0 100 160 1 110130 015016,0 100 160 1 110130 016018,0 100 160 1 110130 018020,0 100 160 1 110130 02001115ContentsDmm art.no.5-piece 4,0 / 5,0 / 6,0 / 8,0 / 10,0 110135 00011115Carbide hammer drill bit• SDS-Plus mounting shank• 4fold helix for optimum removal of bore hole cuttings• Centring point• Utmost stability by core reinforcement• Cutting material, tough carbide metal• for rotary hammers with SDS-Plus mounting shank and dual-grooveholding fi xture Hilti TE 10-22• for drilling in concrete, masonry or natural graniteDmmL1mmLmm art.no.4,0 100 160 110140 00405,0 50 110 110140 00505,0 100 160 110140 00516,0 50 110 110140 00606,0 100 160 110140 00616,0 150 210 110140 00626,0 200 260 110140 00637,0 50 110 110140 00708,0 50 110 110140 00808,0 100 160 110140 00818,0 150 210 110140 00828,0 200 260 110140 008310,0 50 110 110140 010010,0 100 160 110140 010110,0 150 210 110140 010210,0 200 260 110140 010310,0 400 460 110140 010412,0 100 160 110140 012012,0 150 210 110140 012112,0 200 260 110140 012212,0Kits in metal cartridge400 460 110140 01231115DmmL1mmLmm art.no.12,0 550 610 110140 012412,0 950 1000 110140 012514,0 100 160 110140 014014,0 200 260 110140 014114,0 250 310 110140 014214,0 550 610 110140 014315,0 100 160 110140 015015,0 200 260 110140 015116,0 100 160 110140 016016,0 250 310 110140 016116,0 550 610 110140 016316,0 950 1000 110140 016518,0 150 200 110140 018018,0 400 450 110140 018120,0 400 450 110140 020122,0 200 250 110140 022022,0 400 450 110140 022124,0 200 250 110140 024025,0 200 250 110140 025025,0 400 450 110140 025126,0 400 450 110140 02601115Contentsart.no.7-piece 5x50 / 6x50 / 6x100 / 8x50 / 8x100 / 10x100 / 12x100 110145 00011115All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-47


Twist drill bits<strong>Drilling</strong>• Type C 6.3 hexagon drive extension 6.35 mm (1/4’’)• Cutting material HSSIndividual twist drill bitsØmmTotal lengthmmSpiral lengthmm art.no.1,0 32 7 150121 00101,5 32 10 150121 00152,0 34 12 150121 00202,5 36 14 150121 00253,0 38 16 150121 00303,3 40 18 150121 00333,5 40 18 150121 00354,0 44 20 150121 00404,2 45 20 150121 00424,5 46 24 150121 00455,0 50 26 150121 00505,5 50 26 150121 00556,0 50 26 150121 00606,5 50 30 150121 00656,8 50 30 150121 00687,0 50 30 150121 00707,5 51 32 150121 00758,0 51 32 150121 00808,5 53 33 150121 00859,0 53 33 150121 00909,5 54 38 150121 009510,0 54 38 150121 010019-part kit1126materialContentsIn plastic box: 1,0 / 1,5 / 2,0 / 2,5 / 3,0 / 3,5 / 4,0 / 4,5 / 5,0 / 5,5 / 6,0 / 6,5 / 7,0 / 7,5 / 8,0 / 8,5 / 9,0 / 9,5 / 10,0 150121 00011126very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetart.no.Single operation tapping bits• Type C 6.3 hexagon drive extension 6.35 mm (1/4’’)• Cutting material HSSIndividual single operation tapping bitsDmmTotal lengthmmSpiral lengthmm art.no.M 3 33 11 130150 0030M 4 35 12 130150 0040M 5 36 15 130150 0050M 6 39 18 130150 0060M 8 40 19 130150 0080M 10 41 21 130150 010011266-part kitContentsart.no.In plastic box: M 3-4-5-6-8-10 150122 0001112613-part kit, with twist drill bitsmaterialvery well suitedwell suited10-48ContentsIn plastic box M 3-4-5-6-8-10 , twist drill bits: 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 , 1 bit adapter 150123 00011126art.no.steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset


90° countersink bits• Type C 6.3 hexagon drive extension 6.35 mm (1/4’’)• Cutting material HSS• 3 cutting edgesIndividual countersink bitsØmmTotal lengthmm art.no.6,3 31 150120 00638,3 31 150120 008310,4 34 150120 010412,4 35 150120 012416,5 40 150120 016520,5 41 150120 02051129<strong>Drilling</strong>6-part kitmaterialvery well suitedwell suitedContentsart.no.In plastic box: 6,3 / 8,3 /10,4 / 12,4 / 16,5 / 20,5 150125 00011129steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetCombination drill bits• Type C 6.3 hexagon drive extension 6.35 mm (1/4’’)• Cutting material HSS• for cutting of tapping hole, threading and deburring in one work step• for through-holes up to max. 1 x DIndividual combination drill bitsDmm7-part kitMateverywell suitedwell suitedØmmTotal lengthmm art.no.M 3 2,5 36 150124 0030M 4 3,3 39 150124 0040M 5 4,2 41 150124 0050M 6 5,0 44 150124 0060M 8 6,8 50 150124 0080M10 8,5 59 150124 01001126Contentsart.no.In plastic box: M3-4-5-6-8-10, 1 bit adapter 150124 00011126steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetUniversal circle cuttersModel range 2000, Ø 20 - 250 mm• Base body, cross-arm 50 mm (2050-5) for Ø-range of from 20 - 80 mm• can be extended up to Ø 250 mm through the use of longer cross-arms• Twist drill 5 mm Ø, 1 blade (5A10), for material thickness up to 10 mm• Setting gauge, hollow hexagon wrench, completely in case• further shank designs available on requestFig. shows Morse taper shankAll prices in euro, VAT excludedmodel Descriptionart.no.2000-10 Similar to straight 10 mm Ø 103101 00102000-13 Similar to straight 13 mm Ø 103101 00132000-MK2 MK2 With tangs 103101 00022000-MK3 MK3 With tangs 103101 00031120Prices in bold print = delivery ex stock10-49


<strong>Drilling</strong>Model range 3000, Ø 25 - 300 mm• Base body, cross-arm 70 mm (3070-5) for Ø-range of 25 - 100 mm• can be extended up to Ø 300 mm through the use of longer cross-arms• Twist drill 5 mm Ø, 1 blade (5A10), for material thickness up to 10 mm• Setting gauge, hollow hexagon wrench, completely in case• further shank designs available on requestmodel Description3000-W20 WELDON 20 mm Ø 103102 10203000-MK3 MK3 With tangs 103102 00031120art.no.Fig. shows Morse taper shankCross-arm, 14 x 14 mm for model range 2000modelLmmDmmsuitable blade type2090-5 90 80-140 5 103110 00902150-5 140 140-250 5 103110 01401120art.no.Cross-arm, 22 x 22 mm for model range 3000modelLmmDmmsuitable blade type3120-5 120 100-200 5 103115 01203200-5 200 200-300 5 103115 02001120art.no.HSS/Co cutting edge for drilling holesmodelfor material thickness max.mm art.no.5A10 10 5 103130 00015A15 15 5 103130 00025A25 25 5 103130 0003V5A10 10 5 103130 1001V5A15 15 5 103130 1002V5A25 25 5 103130 10031121HSS/Co cutting edge for making washersmodelfor material thickness max.mm art.no.5I10 10 5 103133 00015I15 10 5 103133 10015I25 15 5 103133 1002V5I10 15 5 103133 0002V5I15 25 5 103133 0003V5I25 25 5 103133 10031121Circle-cutter accessories and spare partsmodel Description suitable for model2060 Twist drill 5 mm, standard 2000 / 3000 103140 00012061 Twist drill 5 mm, long 2000 / 3000 103140 00022004 Chuck key 2000 103140 00103005 Chuck key 3000 103140 00112005 Setting gauge 2000 / 3000 103140 00201121art.no.Circle cutter sets, Ø range 25 - 140 mmContents model1 Circle-cutter model 2000-13 with cylindrical holder Ø 13 mm, 1 cross-arm 50 mm, 2 twist drills Ø 5 mm,6 blades 5A10 for material thicknesses max. 10 mm, setting gauge, hollow hexagon wrench 1 cross-arm 90 mm1 Circle-cutter model 2000-MK2 with holder MK2, 1 cross-arm 50 mm, 2 twist drills Ø 5 mm,6blades 5A10 for material thicknesses max. 10 mm, setting gauge, hollow hexagon wrench 1 cross-arm 90 mmmaterialvery well suitedwell suitedart.no.2000-13 103101 20132000-MK2 103101 20021120steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-50


The T-A ® insert drilling systemThe most flexible drillingsystem in the world<strong>Drilling</strong> diameter range 9.5 mm to 114 mm<strong>Drilling</strong> depths up to 30 x D• Precise insert drilling system withnew cutting inserts• Can be used for drilling depths of up to 30xD (carbide inserts up to 8 x D )• Novel AM200 coating and patented 'notch-point' geometry• Improved stability and drilling straightness• Excellent surface and reduced feed pressure• Diameter range from 9.5 to 114.0 mm• Lengths available from extra-short to 3XL• Impressive cutting speeds of over 150 m/min• Excellent chip removal and low cutting pressure• Base substrate made of HSS super cobalt or carbide metal C1 K35• Improved chip control thanks to curved cutting edge<strong>Drilling</strong> <strong>Drilling</strong>Bohren and boringGuaranteed applicationUse the request form (a master copy for photocopying is in the rearcover of the catalogue) to describe your machining problem to us.We will work with the manufacturer to present you with an offer to usesuitable <strong>tools</strong>. Allied Maxcut provides the feasibility guarantee!Full range – The most flexible drilling system in the world!You can find an informational cross-section of the drilling <strong>tools</strong> on offer on the following pages.In addition to the cutting material quality grades specified here, other quality grades can also be supplied:Standard catalogue range:Additional quality grades in thegeneral 'Allied Maxcut' catalogue:The general 'Allied Maxcut' catalogue also containsother diameter ranges and other coatings.C1-K35 carbideHSS super cobaltHSS premium cobaltC2-K20 carbideK10 carbideK20 carbideP40 carbideWe will be glad to send you the general catalogue on request.Two TORX ® Plus screwsmake secure clamping easierPrecision-ground recessFor optimum insert seatingNew patentedcoating AM 200for long service livesFully-fledged helix-sandedside cutting edgeFor a better surface finish and improvedchip controlConcave main cutting edgeImproves chip collection and removalHelix-sanded guide railReduces friction resistance andimproves stabilityProtective chamfer on theexterior diameterfor a longer tool service lifeNotch point geometryImproves stability, improves positioning precision andreduces cutting pressureThe electronic product selectorThe electronic product selector was developed to demonstrate the versatilityof the T-A ® drilling system.The use of the product selector provides you with not only the correct choice of holders,cutting inserts and possibly any accessories you may need, but also with the right cuttingdata for a certain application. The necessary drive power and specified machine and workpiecestability also flow into the cutting data recommendation.The product selector contains a selection of over 3,000 materials. It can be used to fulfilaround 90% of all drilling tasks.The software is available for download from our website: www.sartorius-werkzeuge.de/download/softwarePreisangaben All Artikel prices mit in fettgedruckten euro, in Euro, VAT excluded zzgl Preisen MwSt. = LagerwareArtikel mit Prices fettgedruckten Preisangaben in bold print Preisen in = Euro, delivery = zzgl Lagerware ex MwSt. stock10-10-5110-51


Series Y T-A ® drilling system<strong>Drilling</strong>• Internal coolant supply• * Holders also have a 1/8“ coolant supply connection on the sideSeries Y holder with straight shankChip space design Tool length DmmL3mmL2mmL6mmlinear fl uted Extra short 9,5-11,07 19 47,6 50 95,6 16 48,0 A1 B1 105001 0010linear fl uted short 9,5-11,07 32 61,1 63,5 111,1 20 50,0 1/8” A1 B1 105001 0020helically fl uted Standard 9,5-11,07 60 89,7 92,1 139,7 20 50,0 1/8” A1 B1 105001 0030helically fl uted extra-long 9,5-11,07 111 140,5 142,9 190,5 20 50,0 1/8” A1 B1 105001 0040linear fl uted XL 9,5-11,07 222 251,7 254,1 301,7 20 50,0 1/8” A1 B1 105001 0050linear fl uted 3XL 9,5-11,07 290 319,9 322,3 369,9 20 50,0 1/8” A1 B1 105001 00601141Series Y holder with Morse taper shanksLmmD1mmL4mmThreadart.no.Chip space design Tool length DmmL3mmL2mmL6mmLmmSeries Z T-A ® drilling systemShank RCA Threadlinear fl uted short 9,5-11,07 32 51,5 88 160,3 MK 2 2SRM 1/16” A1 B1 105002 0010helically fl uted Standard 9,5-11,07 60 80,2 116,7 188,9 MK 2 2SRM 1/16” A1 B1 105002 0020helically fl uted extra-long 9,5-11,07 111 130,9 167,4 239,7 MK 2 2SRM 1/16” A1 B1 105002 00301141Series Y cutting insertsOther quality grades and other diameters, some of which are in storage, are available on request.DmmS°HSS Super KobaltAM200art.no.art.no.HM C1 K35 AM200art.no.9,50 132 2 105140 0950 2 105146 095010,00 132 2 105140 1000 2 105146 100010,20 132 2 105140 1020 2 105146 102010,50 132 2 105140 1050 2 105146 105010,80 132 2 105140 1080 2 105146 108011,00 132 2 105140 1100 2 105146 11001142 1143Spare partsScrewTORX-Plusart.no. art.no.A1 105085 0010 B1 705145 00071145 7113• Internal coolant supply• * Holders also have a 1/8“ coolant supply connection on the sideSeries Z holders with straight shankChip space design Tool length DmmL3mmL2mmL6mmlinear fl uted Extra short 11,10-12,95 19,1 45,6 48 93,6 16 48,0 1/16” * A1 B1 105003 0010linear fl uted short 11,10-12,95 32,0 61,1 63,5 111,1 20 50,0 1/8” A1 B1 105003 0020helically fl uted Standard 11,10-12,95 60,0 89,7 92,1 139,7 20 50,0 1/8” A1 B1 105003 0030helically fl uted extra-long 11,10-12,95 111,0 140,5 142,9 190,5 20 50,0 1/8” A1 B1 105003 0040linear fl uted XL 11,10-12,95 222,3 251,7 254,1 301,7 20 50,0 1/8” A1 B1 105003 0050linear fl uted 3XL 11,10-12,95 290,5 319,9 322,3 369,9 20 50,0 1/8” A1 B1 105003 00601141Series Z holder with Morse taper shanksChip space design Tool length DmmL3mmL2mmL6mmLmmLmmD1mmL4mmThreadShank RCA Threadlinear fl uted short 11,10-12,95 32 51,5 88 160,3 MK 2 2SRM 1/16” A1 B1 105004 0010helically fl uted Standard 11,10-12,95 60 80,2 116,7 188,9 MK 2 2SRM 1/16” A1 B1 105004 0020helically fl uted extra-long 11,10-12,95 111 130,9 167,4 239,7 MK 2 2SRM 1/16” A1 B1 105004 00301141Series Z cutting insertsOther quality grades and other diameters, some of which are in storage, are available on request.materialDmmS°HSS Super KobaltAM200art.no.art.no.art.no.HM C1 K35 AM200art.no.11,50 132 2 105236 1150 2 105241 115012,00 132 2 105236 1200 2 105241 120012,50 132 2 105236 1250 2 105241 12501142 1143very well suitedwell suitedHSS Super KobaltHM C1 K35 AM20010-52Spare partsScrewTORX-Plusart.no. art.no.A1 105085 0020 3,40 B1 705145 00071145 7113steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset


Series 0 T-A ® drilling system• Internal coolant supply• * Holders also have a 1/8“ coolant supply connection on the sideSeries 0 holder with straight shank<strong>Drilling</strong>Chip space design Tool length DmmL3mmL2mmL6mmlinear fl uted Extra short 12,98-17,65 22,0 47,6 50,4 97,6 20 50,0 1/8” * A1 B1 105005 0010linear fl uted Extra short 15,50-17,65 22,0 47,6 50,4 97,6 20 50,0 1/8” A2 B1 105005 0020linear fl uted short 12,98-17,65 35 63,5 66,3 113,5 20 50,0 1/8” A1 B1 105005 0030linear fl uted short 15,50-17,65 35 63,5 66,3 113,5 20 50,0 1/8” A2 B1 105005 0040helically fl uted Standard 12,98-17,65 64,0 92,1 94,9 142,1 20 50,0 1/8” A1 B1 105005 0050helically fl uted Standard 15,50-17,65 64,0 92,1 94,9 142,1 20 50,0 1/8” A2 B1 105005 0060helically fl uted extra-long 12,98-17,65 114,0 142,9 145,7 192,9 20 50,0 1/8” A1 B1 105005 0070helically fl uted extra-long 15,50-17,65 114,0 142,9 145,7 192,9 20 50,0 1/8” A2 B1 105005 0080helically fl uted Extremely long 12,98-17,65 177,0 206,4 209,1 256,4 20 50,0 1/8” A1 B1 105005 0090helically fl uted Extremely long 15,50-17,65 177,0 206,4 209,1 256,4 20 50,0 1/8” A2 B1 105005 0100linear fl uted XL 12,98-17,65 295,0 323,9 326,7 373,9 20 50,0 1/8” A1 B1 105005 0110linear fl uted 3XL 12,98-17,65 387,0 416 418,8 466,0 20 50,0 1/8” A1 B1 105005 01201141LmmD1mmL4mmThreadart.no.Series 0 holder with Morse taper shankChip spacedesignTool lengthDmmL3mmL2mmL6mmLmmShank RCA Threadlinear fl uted short 12,98-17,65 35 55,5 92,4 164,3 MK 2 2SRM 1/16” A1 B1 105006 0010linear fl uted short 15,50-17,65 35 55,5 92,4 164,3 MK 2 2SRM 1/16” A2 B1 105006 0020helically fl uted Standard 12,98-17,65 64 84,1 121 192,9 MK 2 2SRM 1/16” A1 B1 105006 0030helically fl uted Standard 15,50-17,65 64 84,1 121 192,9 MK 2 2SRM 1/16” A2 B1 105006 0040helically fl uted extra-long 12,98-17,65 114 135 171,8 243,7 MK 2 2SRM 1/16” A1 B1 105006 0050helically fl uted extra-long 15,50-17,65 114 135 171,8 243,7 MK 2 2SRM 1/16” A2 B1 105006 0060helically fl uted Extremely long 12,98-17,65 177 198,5 235,3 307,2 MK 2 2SRM 1/16” A1 B1 105006 0070helically fl uted Extremely long 15,50-17,65 177 198,5 235,3 307,2 MK 2 2SRM 1/16” A2 B1 105006 00801141art.no.Series 0 cutting insertsOther quality grades and other diameters, some of which are in storage, are available on request.HSS Super KobaltDSHM C1 K35 AM200AM200mm°art.no.art.no.13,00 132 2 105336 1300 2 105341 130013,50 132 2 105336 1350 2 105341 135014,00 132 2 105336 1400 2 105341 140014,50 132 2 105336 1450 2 105341 145015,00 132 2 105336 1500 2 105341 150015,50 132 2 105336 1550 2 105341 155016,00 132 2 105336 1600 2 105341 160016,50 132 2 105336 1650 2 105341 165017,00 132 2 105336 1700 2 105341 170017,50 132 2 105336 1750 2 105341 17501142 1143Spare partsScrewTORX-Plusart.no. art.no.A1 105085 0030 B1 705145 0008A2 105085 00401145 7113very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetHSS Super KobaltHM C1 K35 AM200materialAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-53


Series 1 T-A ® drilling system<strong>Drilling</strong>• Internal coolant supply• * Holders also have a 1/8“ coolant supply connection on the sideSeries 1 holder with straight shankChip space design Tool length DmmL3mmL2mmL6mmlinear fl uted Extra short 17,53-24,38 47 75,8 79,4 131,8 25 56,0 1/8” * A1 B1 105007 0010linear fl uted Extra short 22,00-24,38 57 88,5 92,1 144,5 25 56,0 1/8” * A2 B1 105007 0020linear fl uted short 17,53-24,38 67 107,2 110,7 163,2 25 56,0 1/8” A1 B1 105007 0030linear fl uted short 22,00-24,38 67 107,2 110,7 163,2 25 56,0 1/8” A2 B1 105007 0040helically fl uted Medium-length 17,53-24,38 118 154,8 158,4 210,8 25 56,0 1/8” A1 B1 105007 0050helically fl uted Medium-length 22,00-24,38 118 154,8 158,4 210,8 25 56,0 1/8” A2 B1 105007 0060helically fl uted Standard 17,53-24,38 168 205,6 209,2 261,6 25 56,0 1/8” A1 B1 105007 0070helically fl uted Standard 22,00-24,38 168 205,6 209,2 261,6 25 56,0 1/8” A2 B1 105007 0080helically fl uted extra-long 17,53-24,38 270 307,2 310,8 363,2 25 56,0 1/8” A1 B1 105007 0090helically fl uted extra-long 22,00-24,38 270 307,2 310,8 363,2 25 56,0 1/8” A2 B1 105007 0100linear fl uted XL 17,53-24,38 457 494,5 498,1 225,5 25 56,0 1/8” A1 B1 105007 0110linear fl uted 3XL 17,53-24,38 565 602,5 606,1 658,5 25 56,0 1/8” A1 B1 105007 01201141LmmD1mmL4mmThreadart.no.Series 1 holder with Morse taper shankChip space design Tool length DmmL3mmL2mmL6mmLmmShank RCA Threadlinear fl uted short 17,53-24,38 70 98,4 142,5 232,5 MK 3 3SRM 1/8” A1 B1 105008 0010linear fl uted short 22,00-24,38 70 98,4 142,5 232,5 MK 3 3SRM 1/8” A2 B1 105008 0020helically fl uted Medium-length 17,53-24,38 121 149,2 193,3 283,3 MK 3 3SRM 1/8” A1 B1 105008 0030helically fl uted Medium-length 22,00-24,38 121 149,2 193,3 283,3 MK 3 3SRM 1/8” A2 B1 105008 0040helically fl uted Standard 17,53-24,38 172 200 244,1 334,2 MK 3 3SRM 1/8” A1 B1 105008 0050helically fl uted Standard 22,00-24,38 172 200 244,1 334,2 MK 3 3SRM 1/8” A2 B1 105008 0060helically fl uted extra-long 17,53-24,38 273 301,6 345,7 435,8 MK 3 3SRM 1/8” A1 B1 105008 0070helically fl uted extra-long 22,00-24,38 273 301,6 345,7 435,8 MK 3 3SRM 1/8” A2 B1 105008 00801141art.no.Series 1 cutting insertsOther quality grades and other diameters, some of which are in storage, are available on request.DmmS°HSS Super KobaltAM200art.no.HM C1 K35 AM200art.no.18,00 132 2 105441 1800 2 105446 180018,50 132 2 105441 1850 2 105446 185019,00 132 2 105441 1900 2 105446 190019,50 132 2 105441 1950 2 105446 195020,00 132 2 105441 2000 2 105446 200020,50 132 2 105441 2050 2 105446 205021,00 132 2 105441 2100 2 105446 210021,50 132 2 105441 2150 2 105446 215022,00 132 2 105441 2200 2 105446 220022,50 132 2 105441 2250 2 105446 225023,00 132 2 105441 2300 2 105446 230023,50 132 2 105441 2350 2 105446 235024,00 132 2 105441 2400 2 105446 24001142 1143Spare partsScrewTORX-Plusart.no. art.no.A1 105085 0050 B1 705145 0009A2 105085 00601145 7113very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetHSS Super KobaltHM C1 K35 AM200material10-54


Series 2 T-A ® drilling system• Internal coolant supply• * Holders also have a 1/8“ coolant supply connection on the sideSeries 2 holder with straight shank<strong>Drilling</strong>Chip spacedesignTool lengthDmmL3mmL2mmL6mmLmmlinear fl uted Extra short 24,41-35,05 57 88,5 92,1 148,5 32 60,0 1/4” * A1 B1 105009 0010linear fl uted Extra short 30,00-35,05 92 123,4 127 183,4 32 60,0 1/4” * A1 B1 105009 0020linear fl uted short 24,41-35,05 86 128,6 132,2 188,6 32 60,0 1/4” A1 B1 105009 0030linear fl uted short 30,00-35,05 86 128,6 132,2 188,6 32 60,0 1/4” A1 B1 105009 0040helically fl uted Medium-length 24,41-35,05 137 179,4 183 239,4 32 60,0 1/4” A1 B1 105009 0050helically fl uted Medium-length 30,00-35,05 137 179,4 183 239,4 32 60,0 1/4” A1 B1 105009 0060helically fl uted Standard 24,41-35,05 187 230,2 233,8 290,2 32 60,0 1/4” A1 B1 105009 0070helically fl uted Standard 30,00-35,05 187 230,2 233,8 290,2 32 60,0 1/4” A1 B1 105009 0080helically fl uted extra-long 24,41-35,05 289 331,8 335,4 391,8 32 60,0 1/4” A1 B1 105009 0090helically fl uted extra-long 30,00-35,05 289 331,8 335,4 391,8 32 60,0 1/4” A1 B1 105009 0100linear fl uted XL 24,41-35,05 511 554,1 557,7 614,1 32 60,0 1/4” A1 B1 105009 0110linear fl uted 3XL 24,41-35,05 692 735,1 738,7 795,1 32 60,0 1/4” A1 B1 105009 01201141Series 2 holder with Morse taper shankChip spacedesignTool lengthDmmL3mmL2mmL6mmLmmD1mmL4mmThreadShank RCA Threadlinear fl uted short 24,41-35,05 86 114,3 160,4 273,8 MK 4 3SRM 1/8” A1 B1 105010 0010linear fl uted short 30,00-35,05 86 114,3 167,6 281,0 MK 4 4SRM 1/4” A1 B1 105010 0020helically fl uted Medium-length 24,41-35,05 137 165,1 211,2 324,6 MK 4 3SRM 1/8” A1 B1 105010 0030helically fl uted Medium-length 30,00-35,05 137 165,1 218,4 331,8 MK 4 4SRM 1/4” A1 B1 105010 0040helically fl uted Standard 24,41-35,05 188 215,9 262 375,4 MK 4 3SRM 1/8” A1 B1 105010 0050helically fl uted Standard 30,00-35,05 188 215,9 269,2 382,6 MK 4 4SRM 1/4” A1 B1 105010 0060helically fl uted extra-long 24,41-35,05 289 317,5 363,6 477,0 MK 4 3SRM 1/8” A1 B1 105010 0070helically fl uted extra-long 30,00-35,05 289 317,5 370,8 484,2 MK 4 4SRM 1/4” A1 B1 105010 00801141art.no.art.no.Series 2 cutting insertsOther quality grades and other diameters, some of which are in storage, are available on request.materialDmmS°HSS Super KobaltAM200art.no.HM C1 K35 AM200art.no.24,50 132 2 105541 2450 2 105546 245025,00 132 2 105541 2500 2 105546 250025,50 132 2 105541 2550 2 105546 255026,00 132 2 105541 2600 2 105546 260026,50 132 2 105541 2650 2 105546 265027,00 132 2 105541 2700 2 105546 270027,50 132 2 105541 2750 2 105546 275028,00 132 2 105541 2800 2 105546 280028,50 132 2 105541 2850 2 105546 285029,00 132 2 105541 2900 2 105546 290029,50 132 2 105541 2950 2 105546 295030,00 132 2 105541 3000 2 105546 300030,50 132 2 105541 3050 2 105546 305031,00 132 2 105541 3100 2 105546 310031,50 132 2 105541 3150 2 105546 315032,00 132 2 105541 3200 2 105546 320032,50 132 2 105541 3250 2 105546 325033,00 132 2 105541 3300 2 105546 330033,50 132 2 105541 3350 2 105546 335034,00 132 2 105541 3400 2 105546 340034,50 132 2 105541 3450 2 105546 345035,00 132 2 105541 3500 2 105546 35001142 1143Spare partsScrewTORX-Plusart.no. art.no.A1 105085 0070 B1 705145 00151145 7113very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetHSS Super KobaltHM C1 K35 AM200All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-55


Series 3 T-A ® drilling system<strong>Drilling</strong>• Internal coolant supply• * Holders also have a 1/4“ coolant supply connection on the sideSeries 3 holder with straight shankChip spacedesignTool lengthDmmL3mmL2mmL6mmLmmlinear fl uted Extra short 34,37-47,80 76,2 125 129,8 195,0 40 70 1/4” * A1 B1 105011 0010linear fl uted short 34,37-47,80 121,0 173 177,8 243,0 40 70 1/4” A1 B1 105011 0020helically fl uted Medium-length 34,37-47,80 165,0 217,5 222,3 287,5 40 70 1/4” A1 B1 105011 0030helically fl uted Standard 34,37-47,80 210,0 261,9 266,7 331,9 40 70 1/4” A1 B1 105011 0040linear fl uted extra-long 34,37-47,80 349,3 401,6 406,4 471,6 40 70 1/4” A1 B1 105011 0050linear fl uted XL 34,37-47,80 558,8 611,1 615,9 681,1 40 70 1/4” A1 B1 105011 0060linear fl uted 3XL 34,37-47,80 787,4 839,7 844,5 909,7 40 70 1/4” A1 B1 105011 00701141D1mmL4mmThreadart.no.Series 3 holder with Morse taper shankChip spacedesignTool lengthDmmL3mmL2mmL6mmLmmShank RCA Threadlinear fl uted short 34,37-47,80 121 152,4 206,4 319,1 MK 4 4SRM 1/4” A1 B1 105012 0010helically fl uted Medium-length 34,37-47,80 165 196,9 250,9 363,6 MK 4 4SRM 1/4” A1 B1 105012 0020helically fl uted Standard 34,37-47,80 210 241,3 295,3 408 MK 4 4SRM 1/4” A1 B1 105012 0030linear fl uted extra-long 34,37-47,80 349 381 435 547 MK 4 4SRM 1/4” A1 B1 105012 0040linear fl uted XL 34,37-47,80 558,8 590,6 644,6 757,2 MK 4 4SRM 1/4” A1 B1 105012 0050linear fl uted 3XL 34,37-47,80 787,4 819,2 873,2 985,8 MK 4 4SRM 1/4” A1 B1 105012 00601141art.no.Series 3 cutting insertsOther quality grades and other diameters, some of which are in storage, are available on request.DmmS°HSS Super KobaltAM200art.no.36,00 132 105641 360037,00 132 105641 370038,00 132 105641 380039,00 132 105641 390040,00 132 105641 400041,00 132 105641 410042,00 132 105641 420043,00 132 105641 430044,00 132 105641 440045,00 132 105641 450046,00 132 105641 460047,00 132 105641 47001142Spare partsScrewTORX-Plusart.no. art.no.A1 105085 0080 B1 705145 00201145 7113very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetmaterial10-56


Series 4 T-A ® drilling system• Internal coolant supplySeries 4 holder with straight shankChip spacedesignTool lengthDmmL3mmL2mmL6mmlinear fl uted short 46,99-65,28 130 179,4 184,2 249,4 40 70 1/4” A1 B1 105013 0010helically fl uted Standard 46,99-65,28 232 281 285,8 351,0 40 70 1/4” A1 B1 105013 0020linear fl uted extra-long 46,99-65,28 422 471,5 476,3 541,5 40 70 1/4” A1 B1 105013 0030linear fl uted XL 46,99-65,28 625 674,7 679,5 744,7 40 70 1/4” A1 B1 105013 0040linear fl uted 3XL 46,99-65,28 879 928,7 933,5 998,7 40 70 1/4” A1 B1 105013 00501141LmmD1mmL4mmThreadart.no.<strong>Drilling</strong>Series 4 holder with Morse taper shankChip spacedesignTool lengthDmmL3mmL2mmL6mmLmmShank RCA Threadlinear fl uted short 46,99-65,28 130 165,1 219,1 363,5 MK 5 5SRM 1/4” A1 B1 105014 0010helically fl uted Standard 46,99-65,28 232 266,7 320,7 465,1 MK 5 5SRM 1/4” A1 B1 105014 0020linear fl uted extra-long 46,99-65,28 422 457 511,2 655,6 MK 5 5SRM 1/4” A1 B1 105014 0030linear fl uted XL 46,99-65,28 625 660,4 714,4 858,8 MK 5 5SRM 1/4” A1 B1 105014 0040linear fl uted 3XL 46,99-65,28 879 914,4 968,4 1112,8 MK 5 5SRM 1/4” A1 B1 105014 00501141art.no.Series 4 cutting insertsOther quality grades and other diameters, some of which are in storage, are available on request.DmmS°HSS Super KobaltAM200art.no.48,00 132 105716 480049,00 132 105716 490050,00 132 105716 500051,00 132 105716 510052,00 132 105716 520053,00 132 105716 530054,00 132 105716 540055,00 132 105716 550056,00 132 105716 560057,00 132 105716 570058,00 132 105716 580059,00 132 105716 590060,00 132 105716 600061,00 132 105716 610062,00 132 105716 620063,00 132 105716 630064,00 132 105716 640065,00 132 105716 65001142Spare partsScrewTORX-Plusart.no. art.no.A1 105085 0080 B1 705145 00201145 7113very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetmaterialAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-57


Series 5/6 and 7/8 T-A ® drilling system• Internal coolant supply<strong>Drilling</strong>Holder series 5/6 with Morse taper shankChip spacedesignTool lengthDmmL3mmL2mmL6mmLmmShank RCA Threadlinear fl uted short 62,38-89,08 172 215,9 287,3 430,2 MK 5 6SRM 1/2” A1 B1 105016 0010helically fl uted Standard 62,38-89,08 273 317,5 388,9 531,8 MK 5 6SRM 1/2” A1 B1 105016 0020linear fl uted extra-long 62,38-89,08 464 508 579,4 722,3 MK 5 6SRM 1/2” A1 B1 105016 0030linear fl uted XL 62,38-89,08 660 704,8 776,2 919,1 MK 5 6SRM 1/2” A1 B1 105016 0040linear fl uted 3XL 62,38-89,08 889 933,4 1004,8 1147,7 MK 5 6SRM 1/2” A1 B1 105016 00501141Holder series 7/8 with Morse taper shankChip spacedesignTool lengthDmmL3mmL2mmL6mmShank RCA Threadlinear fl uted short 87,76-114,48 172 225,4 296,8 MK 5 6SRM 1/2” A1 B1 105017 0010helically fl uted Standard 87,76-114,48 273 337 398,5 MK 5 6SRM 1/2” A1 B1 105017 0020linear fl uted extra-long 87,76-114,48 556 610 681 MK 5 6SRM 1/2” A1 B1 105017 0030linear fl uted XL 87,76-114,48 685 739,7 811,2 MK 5 6SRM 1/2” A1 B1 105017 0040linear fl uted 3XL 87,76-114,48 939 993,7 1065,2 MK 5 6SRM 1/2” A1 B1 105017 00501141Series 5 cutting insertsOther quality grades and other diameters, some of which are in storage, are available on request.DmmS°art.no.art.no.HSS Super Kobalt AM200art.no.64,00 144 105765 640066,00 144 105765 660068,00 144 105765 680070,00 144 105765 700072,00 144 105765 720074,00 144 105765 740076,00Series 6 cutting inserts144 105765 76001142Other quality grades and other diameters, some of which are in storage, are available on request.DmmS°HSS Super Kobalt AM200art.no.78,00 144 105810 780080,00 144 105810 800082,00 144 105810 820084,00 144 105810 840086,00 144 105810 860088,00Series 7 cutting inserts144 105810 88001142Other quality grades and other diameters, some of which are in storage, are available on request.DmmS°HSS Super Kobalt AM200art.no.90,00 144 105860 900092,00 144 105860 920094,00 144 105860 940096,00 144 105860 960098,00 144 105860 9800100,00Series 8 cutting inserts144 105860 00001142Other quality grades and other diameters, some of which are in storage, are available on request.DmmS°HSS Super Kobalt AM200art.no.102,00 144 105910 0200104,00 144 105910 0400106,00 144 105910 0600108,00 144 105910 0800110,00 144 105910 1000112,00 144 105910 1200114,00 144 105910 1400Spare parts1142ScrewTORX-Plusart.no. art.no.A1 105085 0090 B1 705145 00251145 7113very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetmaterial10-58


AccessoriesCoolant adapter• Coolant ring, 2 O-ring seals, 2 retaining rings, 2 thrust washersHolding fi xturesD1mmD2mmLmmEmmRCA DesignationMK 2 19,05 44,45 22,23 M 8 1/8” 2SRM 105050 0010MK 3 25.4 53,97 28,57 M 8 1/8” 3SRM 105050 0020MK 4 31,75 63.5 34,92 M10 1/4” 4SRM 105050 0030MK 5 44,45 76.2 37,92 M10 1/4” 5SRM 105050 0040MK 5 57,15 95,27 44,45 M12 1/2” 6SRM 105050 00501145art.no.<strong>Drilling</strong>ISO SK take-up with coolant supply DIN 2080• Coolant pressure max. 40 bar, speed max. 3000 min-1, suitable for holders of series Y to 2Shank designLmmL2mmD2mmDesignationInterior Ømm art.no.SK 40 187,20 93.8 72.2 5SRM 20 105055 4020SK 40 199,00 105.6 72.2 5SRM 25 105055 4025SK 50 224,20 97.2 72.2 5SRM 20 105055 5020SK 50 236,00 109 72.2 5SRM 25 105055 5025SK 50 246,00 119 95,27 6SRM 32 105055 50321145Coolant pipe extension / support rodRCALDesignationmmart.no.1/8” 150 302T-2SRM 105060 00201/8” 150 302T-3SRM 105060 00301/4” 200 302T-4SRM 105060 00401/4” 200 302T-5SRM 105060 00501/2” 200 302T-6SRM 105060 00601145Support rod, solidD4mmLmmDesignationM 8 250 312T-2SRM 105065 0020M 8 250 312T-3SRM 105065 0030M10 250 312T-4SRM 105065 0040M10 250 312T-5SRM 105065 0050M12 250 312T-6SRM 105065 00601145art.no.Quick couplingRCAHose connector ØmmDesignation1/8” 9 322T-2SRM 105070 00201/8” 9 322T-3SRM 105070 00301/4” 9 322T-4SRM 105070 00401/4” 12 322T-5SRM 105070 00501/2” 12 322T-6SRM 105070 00601145All prices in euro, VAT excludedart.no.Prices in bold print = delivery ex stock10-59


High-speed drilling system GEN3SYS ®<strong>Drilling</strong>• Solid holders with internal coolant supply• Holders 3xD, 5xD, 7xD• excellent chip control• up to 20 % higher speeds• High-precision centring of the drill bits in the holder for absolute repeatability• Newly patented TiAlN-coating AM200 ® and AM300,for up to 25 % longer service lives• High drilling accuracy, surface fi nish quality and concentricity• Partially helix-sanded guide rail for maximum stability• Universally applicable for the major part of the materials• Innovative new cutting edge geometryHolder 3xD with straight shankDmmChip space designD1mmL4mmL3mmClamping surfaceL6mm12,00 - 12,99 linear fl uted 20 41,9 39 yes 68,6 66,6 108,5 1/8” A1 B1 105950 010112,00 - 12,99 helically fl uted 20 41,9 39 yes 68,6 66,6 108,5 1/8” A1 B1 105950 010212,00 - 12,99 helically fl uted 20 41,9 39 no 68,6 66,6 108,5 1/8” A1 B1 105950 010313,00 - 13,99 linear fl uted 20 41,9 42 yes 71,5 69,2 111,2 1/8” A1 B1 105950 020113,00 - 13,99 helically fl uted 20 41,9 42 yes 71,5 69,2 111,2 1/8” A1 B1 105950 020213,00 - 13,99 helically fl uted 20 41,9 42 no 71,5 69,2 111,2 1/8” A1 B1 105950 020314,00 - 14,99 linear fl uted 20 41,9 45 yes 75,0 72,4 114,3 1/8” A1 B1 105950 030114,00 - 14,99 helically fl uted 20 41,9 45 yes 75,0 72,4 114,3 1/8” A1 B1 105950 030214,00 - 14,99 helically fl uted 20 41,9 45 no 75,0 72,4 114,3 1/8” A1 B1 105950 030315,00 - 15,99 linear fl uted 20 41,9 48 yes 77,6 75,1 117,0 1/8” A1 B1 105950 040115,00 - 15,99 helically fl uted 20 41,9 48 yes 77,6 75,1 117,0 1/8” A1 B1 105950 040215,00 - 15,99 helically fl uted 20 41,9 48 no 77,6 75,1 117,0 1/8” A1 B1 105950 040316,00 - 16,99 linear fl uted 20 41,9 51 yes 84,2 81,3 123,2 1/8” A2 B2 105950 050116,00 - 16,99 helically fl uted 20 41,9 51 yes 84,2 81,3 123,2 1/8” A2 B2 105950 050216,00 - 16,99 helically fl uted 20 41,9 51 no 84,2 81,3 123,2 1/8” A2 B2 105950 050317,00 - 17,99 linear fl uted 20 41,9 54 yes 87,0 84,1 126,0 1/8” A3 B2 105950 060117,00 - 17,99 helically fl uted 20 41,9 54 yes 87,0 84,1 126,0 1/8” A3 B2 105950 060217,00 - 17,99 helically fl uted 20 41,9 54 no 87,0 84,1 126,0 1/8” A3 B2 105950 060318,00 - 19,99 linear fl uted 25 53,0 60 yes 96,8 94,0 147,1 1/8” A4 B3 105950 070118,00 - 19,99 helically fl uted 25 53,0 60 yes 96,8 94,0 147,1 1/8” A4 B3 105950 070218,00 - 19,99 linear fl uted 25 53,0 60 no 96,8 94,0 147,1 1/8” A4 B3 105950 070320,00 - 21,99 helically fl uted 25 53,0 66 yes 102,9 100,1 153,2 1/8” A4 B3 105950 080120,00 - 21,99 linear fl uted 25 53,0 66 no 102,9 100,1 153,2 1/8” A4 B3 105950 080322,00 - 23,99 helically fl uted 25 53,0 72 yes 108,3 105,3 158,4 1/8” A4 B3 105950 090122,00 - 23,99 linear fl uted 25 53,0 72 no 108,3 105,3 158,4 1/8” A4 B3 105950 090324,00 - 25,99 helically fl uted 25 53,0 78 yes 116,8 113,8 164,0 1/8” A5 B3 105950 100124,00 - 25,99 linear fl uted 25 53,0 78 no 116,8 113,8 164,0 1/8” A5 B3 105950 100326,00 - 28,99 helically fl uted 32 58,0 87 yes 130,9 128,1 186,0 1/8” A6 B4 105950 110126,00 - 28,99 linear fl uted 32 58,0 87 no 130,9 128,1 186,0 1/8” A6 B4 105950 110329,00 - 32,00 helically fl uted 32 58,0 96 yes 139,1 136,2 194,1 1/8” A6 B4 105950 120129,00 - 32,00 linear fl uted 32 58,0 96 no 139,1 136,2 194,1 1/8” A6 B4 105950 12031146L2mmLmmThreadart.no.Holder 5xD with straight shankDmmChip space designD1mmL4mmL3mmClamping surfaceL6mm12,00 - 12,99 linear fl uted 20 41,9 64,9 yes 94,8 134,5 92,6 1/8” A1 B1 105951 010112,00 - 12,99 helically fl uted 20 41,9 64,9 yes 94,8 134,5 92,6 1/8” A1 B1 105951 010212,00 - 12,99 helically fl uted 20 41,9 64,9 no 94,8 134,5 92,6 1/8” A1 B1 105951 010313,00 - 13,99 linear fl uted 20 41,9 70 yes 99,5 139,2 97,3 1/8” A1 B1 105951 020113,00 - 13,99 helically fl uted 20 41,9 70 yes 99,5 139,2 97,3 1/8” A1 B1 105951 020213,00 - 13,99 helically fl uted 20 41,9 70 no 99,5 139,2 97,3 1/8” A1 B1 105951 020314,00 - 14,99 linear fl uted 20 41,9 75 yes 104,9 144,3 102,4 1/8” A1 B1 105951 030114,00 - 14,99 helically fl uted 20 41,9 75 yes 104,9 144,3 102,4 1/8” A1 B1 105951 030214,00 - 14,99 helically fl uted 20 41,9 75 no 104,9 144,3 102,4 1/8” A1 B1 105951 030315,00 - 15,99 linear fl uted 20 41,9 80 yes 109,6 148,9 107,0 1/8” A1 B1 105951 040115,00 - 15,99 helically fl uted 20 41,9 80 yes 109,6 148,9 107,0 1/8” A1 B1 105951 040215,00 - 15,99 helically fl uted 20 41,9 80 no 109,6 148,9 107,0 1/8” A1 B1 105951 040316,00 - 16,99 linear fl uted 20 41,9 84,9 yes 118,2 157,2 115,3 1/8” A2 B2 105951 050116,00 - 16,99 helically fl uted 20 41,9 84,9 yes 118,2 157,2 115,3 1/8” A2 B2 105951 0502114610-60 All prices in euro, VAT excluded Prices in bold print = delivery ex stockLmmL2mmThreadart.no.


DmmChip space designD1mmL4mmL3mmClamping surfaceL6mm16,00 - 16,99 helically fl uted 20 41,9 84,9 no 118,2 157,2 115,3 1/8” A2 B2 105951 050317,00 - 17,99 linear fl uted 20 41,9 89,9 yes 122,9 162,0 120,0 1/8” A3 B2 105951 060117,00 - 17,99 helically fl uted 20 41,9 89,9 yes 122,9 162,0 120,0 1/8” A3 B2 105951 060217,00 - 17,99 helically fl uted 20 41,9 89,9 no 122,9 162,0 120,0 1/8” A3 B2 105951 060318,00 - 19,99 linear fl uted 25 53,0 99,9 yes 136,8 187,1 134,0 1/8” A4 B3 105951 070118,00 - 19,99 helically fl uted 25 53,0 99,9 yes 136,8 187,1 134,0 1/8” A4 B3 105951 070218,00 - 19,99 helically fl uted 25 53,0 99,9 no 136,8 187,1 134,0 1/8” A4 B3 105951 070320,00 - 21,99 linear fl uted 25 53,0 110 yes 146,9 197,2 144,1 1/8” A4 B3 105951 080120,00 - 21,99 helically fl uted 25 53,0 110 yes 146,9 197,2 144,1 1/8” A4 B3 105951 080220,00 - 21,99 helically fl uted 25 53,0 110 no 146,9 197,2 144,1 1/8” A4 B3 105951 080322,00 - 23,99 linear fl uted 25 53,0 120 yes 156,2 206,4 153,3 1/8” A4 B3 105951 090122,00 - 23,99 helically fl uted 25 53,0 120 yes 156,2 206,4 153,3 1/8” A4 B3 105951 090222,00 - 23,99 helically fl uted 25 53,0 120 no 156,2 206,4 153,3 1/8” A4 B3 105951 090324,00 - 25,99 linear fl uted 25 53,0 130 yes 168,7 216,0 165,8 1/8” A5 B3 105951 100124,00 - 25,99 helically fl uted 25 53,0 130 yes 168,7 216,0 165,8 1/8” A5 B3 105951 100224,00 - 25,99 helically fl uted 25 53,0 130 no 168,7 216,0 165,8 1/8” A5 B3 105951 100326,00 - 28,99 linear fl uted 32 58,0 145 yes 188,8 244,0 186,0 1/8” A6 B4 105951 110126,00 - 28,99 helically fl uted 32 58,0 145 yes 188,8 244,0 186,0 1/8” A6 B4 105951 110226,00 - 28,99 helically fl uted 32 58,0 145 no 188,8 244,0 186,0 1/8” A6 B4 105951 110329,00 - 32,00 linear fl uted 32 58,0 160 yes 203,1 258,0 200,1 1/8” A6 B4 105951 120129,00 - 32,00 helically fl uted 32 58,0 160 yes 203,1 258,0 200,1 1/8” A6 B4 105951 120229,00 - 32,00 helically fl uted 32 58,0 160 no 203,1 258,0 200,1 1/8” A6 B4 105951 12031146LmmL2mmThreadart.no.<strong>Drilling</strong>Holder 7xD with straight shankDmmChip space designD1mmL4mmL3mmClamping surfaceL6mm12,00 - 12,99 linear fl uted 20 41,9 90,9 yes 120,8 118,5 160,5 1/8” A1 B1 105952 010115,00 - 15,99 helically fl uted 20 41,9 111,9 yes 141,6 139,0 180,9 1/8” A1 B1 105952 040212,00 - 12,99 helically fl uted 20 41,9 90,9 yes 120,8 118,5 160,5 1/8” A1 B1 105952 010212,00 - 12,99 helically fl uted 20 41,9 90,9 no 120,8 118,5 160,5 1/8” A1 B1 105952 010313,00 - 13,99 linear fl uted 20 41,9 97,9 yes 127,5 125,3 167,2 1/8” A1 B1 105952 020113,00 - 13,99 helically fl uted 20 41,9 97,9 yes 127,5 125,3 167,2 1/8” A1 B1 105952 020213,00 - 13,99 helically fl uted 20 41,9 97,9 no 127,5 125,3 167,2 1/8” A1 B1 105952 020314,00 - 14,99 linear fl uted 20 41,9 104,9 yes 134,9 132,4 190,5 1/8” A1 B1 105952 030114,00 - 14,99 helically fl uted 20 41,9 104,9 yes 134,9 123,4 190,5 1/8” A1 B1 105952 030214,00 - 14,99 helically fl uted 20 41,9 104,9 no 134,9 123,4 190,5 1/8” A1 B1 105952 030315,00 - 15,99 linear fl uted 20 41,9 111,9 yes 141,6 139,0 180,9 1/8” A1 B1 105952 040115,00 - 15,99 helically fl uted 20 41,9 111,9 no 141,6 139,0 180,9 1/8” A1 B1 105952 040316,00 - 16,99 linear fl uted 20 41,9 118,9 yes 152,2 149,3 191,2 1/8” A2 B2 105952 050116,00 - 16,99 helically fl uted 20 41,9 118,9 yes 152,2 149,3 191,2 1/8” A2 B2 105952 050216,00 - 16,99 helically fl uted 20 41,9 118,9 no 152,2 149,3 191,2 1/8” A2 B2 105952 050317,00 - 17,99 linear fl uted 20 41,9 125,9 yes 158,9 156,0 197,9 1/8” A3 B2 105952 060117,00 - 17,99 helically fl uted 20 41,9 125,9 yes 158,9 156,0 197,9 1/8” A3 B2 105952 060217,00 - 17,99 helically fl uted 20 41,9 125,9 no 158,9 156,0 197,9 1/8” A3 B2 105952 060318,00 - 19,99 linear fl uted 25 53,0 139,9 yes 176,8 174,0 227,1 1/8” A4 B3 105952 070118,00 - 19,99 helically fl uted 25 53,0 139,9 no 176,8 174,0 227,1 1/8” A4 B3 105952 070218,00 - 19,99 helically fl uted 25 53,0 139,9 yes 176,8 174,0 227,1 1/8” A4 B3 105952 070320,00 - 21,99 linear fl uted 25 53,0 153,9 yes 190,9 188,1 241,1 1/8” A4 B3 105952 080120,00 - 21,99 helically fl uted 25 53,0 153,9 yes 190,9 188,1 241,1 1/8” A4 B3 105952 080220,00 - 21,99 helically fl uted 25 53,0 153,9 no 190,9 188,1 241,1 1/8” A4 B3 105952 080322,00 - 23,99 linear fl uted 25 53,0 168,0 yes 204,2 201,3 254,4 1/8” A4 B3 105952 090122,00 - 23,99 helically fl uted 25 53,0 168,0 yes 204,2 201,3 254,4 1/8” A4 B3 105952 090222,00 - 23,99 helically fl uted 25 53,0 168,0 no 204,2 201,3 254,4 1/8” A4 B3 105952 090324,00 - 25,99 linear fl uted 25 53,0 182,0 yes 220,7 217,8 267,9 1/8” A5 B3 105952 100124,00 - 25,99 helically fl uted 25 53,0 182,0 yes 220,7 217,8 267,9 1/8” A5 B3 105952 100224,00 - 25,99 helically fl uted 25 53,0 182,0 no 220,7 217,8 267,9 1/8” A5 B3 105952 100326,00 - 28,99 linear fl uted 32 58,0 203,0 yes 246,8 244,0 302,0 1/8” A6 B4 105952 110126,00 - 28,99 helically fl uted 32 58,0 203,0 yes 246,8 244,0 302,0 1/8” A6 B4 105952 110226,00 - 28,99 helically fl uted 32 58,0 203,0 - 246,8 244,0 302,0 1/8” A6 B4 105952 110329,00 - 32,00 linear fl uted 32 58,0 224,0 . 267,1 264,1 322,0 1/8” A6 B4 105952 120129,00 - 32,00 helically fl uted 32 58,0 224,0 . 267,1 264,1 322,0 1/8” A6 B4 105952 120229,00 - 32,00 helically fl uted 32 58,0 224,0 - 267,1 264,1 322,0 1/8” A6 B4 105952 12031146All Prices prices in bold in euro, print VAT = delivery excluded ex stockL2mmLmmThreadart.no.Prices in All bold prices print = euro, delivery VAT excludedstock10-61


<strong>Drilling</strong>Carbide cutting insertsDmmS°K35 (C1) AM200art.no.K20 (C2) AM200art.no.K20 (CI) AM200art.no.K35 (AS) AM300art.no.12,00 140 105970 1200 105971 120012,50 140 105970 1250 105971 1250 105972 1250 105973 125013,00 140 105970 1300 105971 130013,50 140 105970 1350 105971 1350 105972 1350 105973 135014,00 140 105970 1400 105971 140014,50 140 105970 1450 105971 1450 105972 1450 105973 145015,00 140 105970 1500 105971 150015,50 140 105970 1550 105971 1550 105972 1550 105973 155016,00 140 105970 1600 105971 160016,50 140 105970 1650 105971 1650 105972 1650 105973 165017,00 140 105970 1700 105971 170017,50 140 105970 1750 105971 1750 105972 1750 105973 175018,00 140 105970 1800 105971 180018,50 140 105970 1850 105971 1850 105972 1850 105973 185019,00 140 105970 1900 105971 190019,50 140 105970 1950 105971 1950 105972 1950 105973 195020,00 140 105970 2000 105971 200020,50 140 105970 2050 105971 2050 105972 2050 105973 205021,00 140 105970 2100 105971 210022,00 140 105970 2200 105971 2200 105972 2200 105973 220023,00 140 105970 2300 105971 230024,00 140 105970 2400 105971 2400 105972 2400 105973 240025,00 140 105970 2500 105971 250026,00 140 105970 2600 105971 2600 105972 2600 105973 260027,00 140 105970 2700 105971 270028,00 140 105970 2800 105971 2800 105972 2800 105973 280029,00 140 105970 2900 105971 290030,00 140 105970 3000 105971 3000 105972 3000 105973 300030,50 140 105970 3050 105971 305031,00 140 105970 3100 105971 310032,00 140 105970 3200 105971 3200 105972 3200 105973 32001147 1147 1147 1147Spare partsScrewTORX-Plusart.no. art.no.A1 105085 0020 B1 705145 0007A2 105085 0030 B2 705145 0008A3 105085 0040 B3 705145 0009A4 105085 0050 B4 705145 0015A5 105085 0060A6 105085 00701145 7113very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetK35 (C1) AM200materialK20 (C2) AM200K20 (CI) AM200K35 (AS) AM300Safety at the workplacePlease protect your eyes, hearing and respiratory organs!Ear protectorsSafety gogglesatBreathing protection apparStartingon90-48pageStartingon90-45pageStartingonpage90-50us10-62 All prices in euro, VAT excluded Prices in bold print = delivery ex stock


Solid drilling <strong>tools</strong> SARA-DRILL• Machining of bore holes from 49 to 270 mm Ø• on machines with low drive power• low-vibration machining that is gentle to the machine with drive powerthat is reduced by up to 50 %• <strong>Drilling</strong> in a single work step without centring and pre-drilling• planing of the front face not required• Cost-effi cient boring system, since diff erences in diameter of up to 30 mm can bemachined with one boring head by changing the cutting edges• Variable drilling depths of up to 15 x D due to holding fi xture system with pluggable extensions• Internal coolant supply directly to the cutting edge, no high-pressure pump required• for rotating <strong>tools</strong>, the coolant is supplied via a coolant ring• Short chips due to chip-separating grooves in the roughing blade,no chip removal, even with extremely deep bores• Also used on vertically operating machines• Low tooling costs since wear only on the cutting edges and on the centre bit• Unproblematic regrinding of the centre bit and the cutting edges (in pairs)using the grinding fi xture or the tool grinding machine<strong>Drilling</strong>• Cutting material:• cutting edges ASP30, ASP30 TiN• centre bit HSS• Use on all machine <strong>tools</strong> as a rotating or stationary tool especially for machininglarge bore diameters on machines with low drive power• Caution: Not for boring already existing bores!Boring headDesignationWorking areamm art.no.A1-55 49 - 55 104501 0055A2-65 55 - 65 104501 0065B-80 65 - 80 104501 0080C-100 80 - 100 104501 0100D -120 100 - 120 104501 0120E-150 120 - 150 104501 0150F-180 150 - 180 104501 0180G-210 180 - 210 104501 0210H-240 210 - 240 104501 0240I-270 240 - 270 104501 02701118Boring barwith Morse taper holding fi xturefor boring headL1mmL2mmL3mmD1mmShank designA1/A2 200 158 30 29 MK 4 104505 0055B-80 200 158 30 35 MK 4 104505 0080C-100 200 158 30 38 MK 4 104505 0100D -120 200 192 30 45 MK 5 104505 0120E-150 200 192 30 55 MK 5 104505 0150F-180 200 192 30 65 MK 5 104505 0180G-210 200 192 30 75 MK 5 104505 0210H-240 200 267 40 85 MK 6 104505 0240I-270 200 267 40 95 MK 6 104505 02701118art.no.Extension150 mm and 300 mmfor boring headD1mm150 mmart.no.300 mmart.no.A1/A2 29 104510 0055 104515 0055B-80 35 104510 0080 104515 0080C-100 38 104510 0100 104515 0100D -120 45 104510 0120 104515 0120E-150 55 104510 0150 104515 0150F-180 65 104510 0180 104515 0180G-210 75 104510 0210 104515 0210H-240 85 104510 0240 104515 0240I-270 95 104510 0270 104515 02701118 1118All Prices prices in bold in euro, print VAT = delivery excluded ex stockPrices in All bold prices print = euro, delivery VAT excludedstock10-63


HM guidefor use with extremely deep dill holes<strong>Drilling</strong>for boring headWorking areamm art.no.B-80 65 - 70 104520 0070B-80 70 - 80 104520 0080C-100 / D-120 80 - 120 104520 0120E-150 / F-180 120 - 180 104520 0180G-210 / H-240 / I-270 180 - 270 104520 02701118Centre bitfor boring headDmmWorking areamm art.no.A1-55 to D-120 12 49 - 120 104530 0012E-150 to I-270 20 120 - 270 104530 00201119Coolant ringCompl. with coupling, grip bar and circlipfor boring headWorking areaShank designmmart.no.A1-55 to C-100 49 - 100 MK 4 104540 0001D-120 to G-210 100 - 210 MK 5 104540 0002H-240 to I-270 210 - 270 MK 6 104540 00031118Replacement shimsfor boring heads (prices per kit = 2 heads)for boring headart.no.A1-55 104570 0001A2-65 104570 0002B-80 104570 0003C-100 104570 0004D -120 104570 0005E-150 104570 0006F-180 104570 0007G-210 104570 0008H-240 104570 0009I-270 104570 00101118www.atorn.deHigh quality for great performance.Dial indicators by ATORN:• best manufacturing quality• maximum precision• long service lifeThis is but one example of ATORN‘s high-quality measuring <strong>tools</strong>.10-64 All prices in euro, VAT excluded Prices in bold print = delivery ex stock


Cutting edge SARA- DRILL• for SARA-DRILL solid drilling <strong>tools</strong>• The cutting edges are delivered in pairs, i.e. 1 roughing blade and 1 fi nishing blade.• Note for machining blind holes:• for machining intermediate sizes, the fi nishing blade can be adjusted in the range of from 3 to 10 mm,depending on the size of the boring head.(Not permissible for machining through-holes!)• Caution: The cutting edges may only be replaced in pairs,otherwise risk of breakage!• Prices per pair (1 roughing blade and 1 fi nishing blade)1 = Finishing blade2 = Centre bit3 = Roughing blade<strong>Drilling</strong>Dmmfor boring head ASP 30art.no.ASP 30 TiN-coatedart.no.49 A1-55 104550 0049 104555 004950 A1-55 104550 0050 104555 005051 A1-55 104550 0051 104555 005152 A1-55 104550 0052 104555 005253 A1-55 104550 0053 104555 005354 A1-55 104550 0054 104555 005455 A1-55,A2-65 104550 0055 104555 005556 A2-65 104550 0056 104555 005657 A2-65 104550 0057 104555 005758 A2-65 104550 0058 104555 005859 A2-65 104550 0059 104555 005960 A2-65 104550 0060 104555 006061 A2-65 104550 0061 104555 006162 A2-65 104550 0062 104555 006263 A2-65 104550 0063 104555 006364 A2-65 104550 0064 104555 006465 A2-65,B-080 104550 0065 104555 006566 B- 80 104550 0066 104555 006667 B- 80 104550 0067 104555 006768 B- 80 104550 0068 104555 006869 B- 80 104550 0069 104555 006970 B- 80 104550 0070 104555 007071 B- 80 104550 0071 104555 007172 B- 80 104550 0072 104555 007273 B- 80 104550 0073 104555 007374 B- 80 104550 0074 104555 007475 B- 80 104550 0075 104555 007576 B- 80 104550 0076 104555 007677 B- 80 104550 0077 104555 007778 B- 80 104550 0078 104555 007879 B- 80 104550 0079 104555 007980 B- 80,C- 100 104550 0080 104555 008081 C-100 104550 0081 104555 008182 C-100 104550 0082 104555 008283 C-100 104550 0083 104555 008384 C-100 104550 0084 104555 008485 C-100 104550 0085 104555 008586 C-100 104550 0086 104555 008687 C-100 104550 0087 104555 008788 C-100 104550 0088 104555 008889 C-100 104550 0089 104555 008990 C-100 104550 0090 104555 009091 C-100 104550 0091 104555 009192 C-100 104550 0092 104555 009293 C-100 104550 0093 104555 009394 C-100 104550 0094 104555 009495 C-100 104550 0095 104555 00951119 1119Grinding fixture for cutting edgesfor boring headDmmWorking areamm art.no.A1-D-120 49-120 104580 0001E-150-I-270 120-270 104580 00021118for boring head ASP 30art.no.ASP 30 TiN-coatedart.no.96 C-100 104550 0096 104555 009697 C-100 104550 0097 104555 009798 C-100 104550 0098 104555 009899 C-100 104550 0099 104555 0099100 C-100,D- 120 104550 0100 104555 0100101 D -120 104550 0101 104555 0101102 D -120 104550 0102 104555 0102103 D -120 104550 0103 104555 0103104 D -120 104550 0104 104555 0104105 D -120 104550 0105 104555 0105106 D -120 104550 0106 104555 0106107 D -120 104550 0107 104555 0107108 D -120 104550 0108 104555 0108109 D -120 104550 0109 104555 0109110 D -120 104550 0110 104555 0110111 D -120 104550 0111 104555 0111112 D -120 104550 0112 104555 0112113 D -120 104550 0113 104555 0113114 D -120 104550 0114 104555 0114115 D -120 104550 0115 104555 0115116 D -120 104550 0116 104555 0116117 D -120 104550 0117 104555 0117118 D -120 104550 0118 104555 0118119 D -120 104550 0119 104555 0119120 D -120 104550 0120 104555 0120120 E-150 104550 1120 104555 1120125 E-150 104550 0125 104555 0125130 E-150 104550 0130 104555 0130135 E-150 104550 0135 104555 0135140 E-150 104550 0140 104555 0140145 E-150 104550 0145 104555 0145150 E-150 104550 0150 104555 0150150 F-180 104550 1150 104555 1150155 F-180 104550 0155 104555 0155160 F-180 104550 0160 104555 0160165 F-180 104550 0165 104555 0165170 F-180 104550 0170 104555 0170180 F-180,G-210 104550 0180 104555 0180190 G-210 104550 0190 104555 0190200 G-210 104550 0200 104555 0200210 G-210,H-240 104550 0210 104555 0210220 H-240 104550 0220 104555 0220230 H-240 104550 0230 104555 0230240 H-240,I-270 104550 0240 104555 0240250 I-270 104550 0250 104555 0250260 I-270 104550 0260 104555 0260270 I-270 104550 0270 104555 02701119 1119materialvery well suitedwell suitedASP 30ASP 30 TiN-coated104580 0001 104580 0002steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll Prices prices in bold in euro, print VAT = delivery excluded ex stockPrices in All bold prices print = euro, delivery VAT excludedstock10-65


Solid drill bits for ISO indexable cutting inserts<strong>Drilling</strong>• Tool holder made of high-strength hardened and tempered tool steel (surface nitrided)• two clamping surfaces staggered by 180° on the shank or VDI 30 and VDI 40 holding fi xtures• Formal insert seat in the Ø range of from 14 - 60 mm• ISO-indexable inserts in the Ø range of 14-60 mm• optimum chip space geometry (scaled)• Broad application range due to available tool lengths of 2 x D, 3 x D and 4 x D• better utilization of the length of your CNC lathe since there is no tool holder (with VDI direct tool holder)• extensive fi eld of application and cost saving due to the use of ISO indexable cutting inserts• more eff ective chip removal• Delivery of special sizes within 4 weeks with additional charge• Progressive dies with max. two gradings (chamfers etc.) possible• Reduction of the machining times due to higher cutting speeds• Reduction of the auxiliary processing times due to simple and fast replacement of cutting element• Low-cost carrier• Saving of tooling costs due to ISO indexable insert and simultaneous increase in productivity• with internal coolant supplyVery large adjusting rangewith tool holding fixtureno. 434403....Solid drill bits 2 x D, straight shankDmmL1mmD1mmL6mmL4mmsuitable indexableinsertsNumber of index.inserts15,0 30 20 56 42 CPMT 0502.. 2 A2 C1 124152 015016,0 32 20 56 42 CPMT 0502.. 2 A2 C1 124152 016017,0 34 20 56 42 CPMT 0502.. 2 A2 C1 124152 017017,5 35 20 60 42 CCMT 0602.. 2 A2 C1 124152 017518,0 36 20 60 42 CCMT 0602.. 2 A3 B1 C2 124152 018019,0 38 20 60 42 CCMT 0602.. 2 A3 B1 C2 124152 019020,0 40 20 60 42 CCMT 0602.. 2 A3 B1 C2 124152 020021,0 42 25 72 50 CCMT 0803.. 2 A4 B1 C2 124152 021022,0 44 25 72 50 CCMT 0803.. 2 A4 B1 C2 124152 022023,0 46 25 72 50 CCMT 0803.. 2 A4 B1 C2 124152 023024,0 48 25 78 50 CCMT 0803.. 2 A4 B1 C2 124152 024025,0 50 25 78 50 CCMT 0803.. 2 A4 B1 C2 124152 025026,0 52 25 78 50 CCMT 0803.. 2 A5 B1 C2 124152 026027,0 54 32 86 55 CCMT 09T3.. 2 A5 B1 C2 124152 027028,0 56 32 86 55 CCMT 09T3.. 2 A5 B1 C2 124152 028029,0 58 32 90 55 CCMT 09T3.. 2 A5 B1 C2 124152 029030,0 60 32 90 55 CCMT 09T3.. 2 A5 B1 C2 124152 030032,0 64 32 94 55 CCMT 09T3.. 2 A5 B1 C2 124152 032034,0 68 32 98 55 CCMT 09T3.. 2 A5 B1 C2 124152 034036,0 72 32 107 55 CCMT 1204.. 2 A6 B1 C2 124152 036037,0 74 32 111 55 CCMT 1204.. 2 A6 B1 C2 124152 037038,0 76 32 111 55 CCMT 1204.. 2 A6 B1 C2 124152 038039,0 78 32 113 55 CCMT 1204.. 2 A6 B2 C3 124152 039040,0 80 32 115 55 CCMT 1204.. 2 A6 B2 C3 124152 040042,0 84 32 119 55 CCMT 1204.. 2 A6 B2 C3 124152 042044,0 88 32 123 55 CCMT 1204.. 2 A6 B2 C3 124152 044045,0 90 32 123 55 CCMT 1204.. 2 A6 B2 C3 124152 045046,0 92 32 127 55 CCMT 1204.. 2 A6 B2 C3 124152 046047,0 94 40 136 63 CCMT 09T3.. 4 A5 B1 C2 124152 047048,0 96 40 136 63 CCMT 09T3.. 4 A5 B1 C2 124152 048049,0 98 40 140 63 CCMT 09T3.. 4 A5 B1 C2 124152 049050,0 100 40 140 63 CCMT 09T3.. 4 A5 B1 C2 124152 050052,0 104 40 144 63 CCMT 09T3.. 4 A5 B1 C2 124152 052054,0 108 40 148 63 CCMT 09T3.. 4 A5 B1 C2 124152 054056,0 112 40 152 63 CCMT 09T3.. 4 A5 B1 C2 124152 056058,0 116 40 156 63 CCMT 09T3.. 4 A5 B1 C2 124152 058059,0 118 40 160 63 CCMT 09T3.. 4 A5 B1 C2 124152 059060,0 120 40 160 63 CCMT 09T3.. 4 A5 B1 C2 124152 06001122art.no.Solid cartridge drillsavailable on request! <strong>Drilling</strong> of different diametersby using different outer cartridges!10-66 All prices in euro, VAT excluded Prices in bold print = delivery ex stockD1


Solid drill bits 3 x D, straight shankDmmL1mmD1mmL6mmL4mmsuitable indexable insertsNumber of index.inserts14,0 42 25 65 42 CPGT 0401.. 2 A1 C1 124153 014015,0 45 25 73 50 CPMT 0502.. 2 A2 C1 124153 015016,0 48 25 73 50 CPMT 0502.. 2 A2 C1 124153 016016,5 50 25 73 50 CPMT 0502.. 2 A2 C1 124153 016517,0 51 25 73 50 CPMT 0502.. 2 A2 C1 124153 017017,5 53 25 82 50 CCMT 0602.. 2 A3 B1 C2 124153 017518,0 54 25 82 50 CCMT 0602.. 2 A3 B1 C2 124153 018018,5 56 25 82 50 CCMT 0602.. 2 A3 B1 C2 124153 018519,0 57 25 82 50 CCMT 0602.. 2 A3 B1 C2 124153 019020,0 60 20 82 50 CCMT 0602.. 2 A3 B1 C2 124153 020020,5 62 25 87 50 CCMT 0602.. 2 A3 B1 C2 124153 020521,0 63 25 96 50 CCMT 0803.. 2 A4 B1 C2 124153 021022,0 66 25 96 50 CCMT 0803.. 2 A4 B1 C2 124153 022022,5 68 25 102 50 CCMT 0803.. 2 A4 B1 C2 124153 022523,0 69 25 102 50 CCMT 0803.. 2 A4 B1 C2 124153 023024,0 72 25 102 50 CCMT 0803.. 2 A4 B1 C2 124153 024024,5 74 25 105 50 CCMT 0803.. 2 A4 B1 C2 124153 024525,0 75 25 108 50 CCMT 0803.. 2 A4 B1 C2 124153 025026,0 78 25 108 50 CCMT 0803.. 2 A4 B1 C2 124153 026027,0 81 32 118 55 CCMT 09T3.. 2 A5 B1 C2 124153 027028,0 84 32 118 55 CCMT 09T3.. 2 A5 B1 C2 124153 028029,0 87 32 124 55 CCMT 09T3.. 2 A5 B1 C2 124153 029030,0 90 32 124 55 CCMT 09T3.. 2 A5 B1 C2 124153 030031,0 93 32 130 55 CCMT 09T3.. 2 A5 B1 C2 124153 031032,0 96 32 130 55 CCMT 09T3.. 2 A5 B1 C2 124153 032033,0 99 32 136 55 CCMT 09T3.. 2 A5 B1 C2 124153 033034,0 102 32 136 55 CCMT 09T3.. 2 A5 B1 C2 124153 034035,0 105 40 147 63 CCMT 1204.. 2 A6 B1 C2 124153 035036,0 108 40 147 63 CCMT 1204.. 2 A6 B1 C2 124153 036037,0 111 40 153 63 CCMT 1204.. 2 A6 B1 C2 124153 037038,0 114 40 153 63 CCMT 1204.. 2 A6 B1 C2 124153 038039,0 117 40 156 63 CCMT 1204.. 2 A6 B1 C2 124153 039040,0 120 40 159 63 CCMT 1204.. 2 A6 B1 C2 124153 040042,0 126 40 165 63 CCMT 1204.. 2 A6 B1 C2 124153 042044,0 132 40 171 63 CCMT 1204.. 2 A6 B1 C2 124153 044045,0 135 40 177 63 CCMT 1204.. 2 A6 B1 C2 124153 045046,0 138 40 177 63 CCMT 1204.. 2 A6 B1 C2 124153 046047,0 141 40 184 63 CCMT09T3.. 4 A5 B1 C2 124153 047048,0 144 40 184 63 CCMT09T3.. 4 A5 B1 C2 124153 048050,0 150 40 190 63 CCMT09T3.. 4 A5 B1 C2 124153 05001122art.no.D1<strong>Drilling</strong>Solid drill bits 4 x D, straight shankDmmL1mmD1mmL6mmL4mmsuitable indexable insertsNumber of index.inserts15 60 25 90 50 CPMT 0502.. 2 A2 C1 124158 015016 64 25 96 50 CPMT 0502.. 2 A2 C1 124158 016017 51 25 100 50 CPMT 0502.. 2 A2 C1 124158 017018 72 25 104 50 CCMT 0602.. 2 A3 B1 C2 124158 018019 76 25 108 50 CCMT 0602.. 2 A3 B1 C2 124158 019020 80 25 112 50 CCMT 0602.. 2 A3 B1 C2 124158 020021 84 25 116 50 CCMT 0602.. 2 A4 B1 C2 124158 021022 88 25 120 50 CCMT 0602.. 2 A4 B1 C2 124158 022023 92 25 128 50 CCMT 0803.. 2 A4 B1 C2 124158 023024 96 25 132 50 CCMT 0803.. 2 A4 B1 C2 124158 024025 100 25 136 50 CCMT 0803.. 2 A4 B1 C2 124158 025026 104 32 140 55 CCMT 0803.. 2 A4 B1 C2 124158 026027 108 32 144 55 CCMT 09T3.. 2 A4 B1 C2 124158 027028 112 32 148 55 CCMT 09T3.. 2 A4 B1 C2 124158 028029 116 32 152 55 CCMT 09T3.. 2 A4 B1 C2 124158 029030 120 32 156 55 CCMT 09T3.. 2 A4 B1 C2 124158 030031 124 32 160 55 CCMT 09T3.. 2 A4 B1 C2 124158 031032 128 32 164 55 CCMT 09T3.. 2 A4 B1 C2 124158 032033 132 40 168 63 CCMT 09T3.. 2 A4 B1 C2 124158 033034 136 40 172 63 CCMT 09T3.. 2 A4 B1 C2 124158 034035 140 40 176 63 CCMT 09T3.. 2 A6 B1 C2 124158 035036 144 40 184 63 CCMT 09T3.. 2 A6 B1 C2 124158 036037 148 40 188 63 CCMT 1204.. 2 A6 B1 C2 124158 037038 152 40 192 63 CCMT 1204.. 2 A6 B1 C2 124158 038039 156 40 196 63 CCMT 1204.. 2 A6 B1 C2 124158 039040 160 40 200 63 CCMT 1204.. 2 A6 B1 C2 124158 04001122All Prices prices in bold in euro, print VAT = delivery excluded ex stockart.no.Prices in All bold prices print = euro, delivery VAT excludedstock10-67D1


<strong>Drilling</strong>Solid drill bit 2 x D, VDI 30DmmL1mmL6mmL4mmsuitable indexableinsertsNumber ofindex. inserts36 72 114 55 CCMT 1204.. 2 A6 B1 C2 124164 036038 76 118 55 CCMT 1204.. 2 A6 B1 C2 124164 038040 80 122 55 CCMT 1204.. 2 A6 B1 C2 124164 040042 84 126 55 CCMT 1204.. 2 A6 B1 C2 124164 042044 88 130 55 CCMT 1204.. 2 A6 B1 C2 124164 044047 94 144 55 CCMT09T3.. 4 A5 B1 C2 124164 047050 100 150 55 CCMT09T3.. 4 A5 B1 C2 124164 050053 106 156 55 CCMT09T3.. 4 A5 B1 C2 124164 0530Solid drill bit 3 x D, VDI 401122DmmL1mmL6mmL4mmsuitable indexableinsertsNumber ofindex. insertsart.no.art.no.36 108 163 63 CCMT 1204.. 2 A5 B1 C2 124165 036038 114 169 63 CCMT 1204.. 2 A5 B1 C2 124165 038040 120 175 63 CCMT 1204.. 2 A5 B1 C2 124165 040042 126 181 63 CCMT 1204.. 2 A5 B1 C2 124165 042044 132 187 63 CCMT 1204.. 2 A5 B1 C2 124165 044046 138 193 63 CCMT 1204.. 2 A5 B1 C2 124165 046048 144 199 63 CCMT 09T3.. 4 A5 B1 C2 124165 048050 150 205 63 CCMT 09T3.. 4 A5 B1 C2 124165 050052 156 211 63 CCMT 09T3.. 4 A5 B1 C2 124165 052054 162 217 63 CCMT 09T3.. 4 A5 B1 C2 124165 0540Indexable inserts• ISO range: P30-40 M30-40 K30-401122ISOISO designation EN 300art.no.CPGT 04T104-A 10 124157 0015CPMT 050204-A 10 124157 0001CCMT 060204-A 10 124157 0002CCMT 060204-B 10 124157 0003CCMT 060204-C 10 124157 0004CCMT 080308-A 10 124157 0005CCMT 080308-B 10 124157 0006CCMT 080308-C 10 124157 0007CCMT 09T308-A 10 124157 0008CCMT 09T308-B 10 124157 0009CCMT 09T308-C 10 124157 0010CCMT 120408-A 10 124157 0011CCMT 120408-B 10 124157 00121123CCMT..-ACCMT..-BCCMT..-CSpare partsScrew Grub screws Keysart.no. art.no. art.no.A1 1 124160 1820 B1 5 124161 0620 C1 1 703053 0060A2 1 124160 2220 B3 5 124161 1234 C2 1 703053 0070A3 1 124160 2520 C4 1 703053 0200A4 1 124160 3025A5 1 124160 4034A6 1 124160 50383106 3106 711410-68 All prices in euro, VAT excluded Prices in bold print = delivery ex stock


<strong>Drilling</strong> and turning tool SARA-CUT• <strong>Drilling</strong> and turning with one tool• <strong>Drilling</strong> into solid matter with a level base of the drill hole (drawing 1)• Turning of internal contours (drawing 2)• Turning of fl at contours (drawing 3)• Turning of external contours (drawing 4))• (Note change of turning direction)• Reduced stock-keeping of <strong>tools</strong> and indexable inserts• Reduced programming eff ort and expense• Reduced tooling times• Problem solver in the case of missing mould plates• Reduction of the tooling costs• with internal coolant supply, including spare screw for closing the front, head-end coolant bore• Indexable inserts including one clamping screwD1<strong>Drilling</strong>1.8 x DDmmD1mmD4mmD5mmLmmL2mmL3mmL4mmRightart.no.12 25 34 11,2 90 22 27 50 A1 B1 125101 0012 125102 001215 25 34 14,2 95 27 32 50 A2 B1 125101 0015 125102 001518 25 34 17 100 32 37 50 A3 B2 125101 0018 125102 001824 32 43 23 120 43 48 55 A4 B3 125101 0024 125102 00241122 1122art.no.Left2,5 x DDmmD1mmD4mmD5mmLmmL2mmL3mmL4mmRightart.no.12 25 34 11,2 100 30 35 50 A1 B1 125202 0012 125201 001215 25 34 14,2 108 37 42 50 A2 B1 125202 0015 125201 001518 25 34 17 115 45 50 50 A3 B2 125202 0018 125201 001824 32 43 23 140 60 65 55 A4 B3 125202 0024 125201 00241122 1122art.no.LeftIndexable inserts• ISO range: P30-40 M30-40 K30-40TypeISOsuitable for Dmm art.no.CCMX 060204-MB 12 10 124159 0001CCMX 080308-MB 15 10 124159 0002CCMX 09T308-MB 18 10 124159 0003CCMX 120408-MB 24 10 124159 00041123Spare partsScrewKeysart.no. art.no.A1 124162 2512 B1 703053 0080A2 124162 3015 B2 703053 0150A3 124162 4018 B3 703053 0200A4 124162 50243106 7114CCMT..-Bwww.atorn.deHigh quality for great performance.Swivel bases by ATORN:• high-quality materials• longest service life• several different chip geometriesThis is but one example of ATORN‘s high-quality turning <strong>tools</strong>.All Prices prices in bold in euro, print VAT = delivery excluded ex stockPrices in All bold prices print = euro, delivery VAT excludedstock10-69


www.atorn.deHigh quality for great performance.ATORN‘s taps:• highest cutting speeds• precision-ground for safest machining• ISO colour codes for easy identifi cation of the correct toolThis is but one example of ATORN‘s high-quality drilling <strong>tools</strong>.


Overview of threading taps and forming tapsHand tapmetric thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . from page 10-72metric fine thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10-74Whitworth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10-76UNC thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10-75UNF thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . from page 10-75<strong>Drilling</strong> BohrenMachine threading taps and forming tapsmetric thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . from page 10-77metric fine thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10-99Whitworth pipe thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . from page 10-102UNC thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10-104UNF thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . from page 10-104NPT thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10-105Panzergewinde thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10-105Thetap rangeWith a new database-oriented system of tool design in the research disciplines of high-speed steel, heat treatment, surface treatment andhard coatings, – the ATORN tap range meets the higher demands of the key industries of engineering and machine construction, automotive, fittings and screw joints,medical technology and aerospace.The following properties are of particular interest in the new ATORN tap range:The technology used in manufacturingthe ATORN tap range• Different high-alloy high-speed steels, PM steels and newly developedcarbide types as a base substrate.• Optimised heat and surface treatment and cutting edge formation forprocess safety in use.• The latest developments in hard substance coating for the relevant fieldof use.• Tool/geometry combinations (up to 138 specific characteristics) for eachtap version available 'online' from a production database and ensuring thehigh standard of the product.• Strict tolerances in tool production and increased SPC expense with'tool quality management'.• The use of state-of-the-art precision machinery and equipment in toolproduction to ensure 100% reproducibility of the versatile tool design inthe ATORN range.The advantages of usingthe ATORN tap range• Diversity in products to cover all noteworthy requirements inmetalworking.• Faster machining speeds, – in part thanks to new cutting materials,tool geometries and coating technologies.• Increased service life thanks to the optimum combination of cuttingmaterial, heat and surface treatment, geometric data and coatingtechnology.• Reduction in retooling times.• Increasing the range of uses of the relevant tool group.The use of the ATORN tap range therefore increases process safety for every user in production, reduces tool costs and optimising the workpiece cutting results. This meansthat this tool development sets new standards – both technical and commercial.The ISO colour ring system forthreading taps and forming tapsATORN taps are colour-coded with rings using the ISO coding system based on their main field of use.The relevant secondary uses are specified in the catalogue.steels up to 1000 N/mm 2stainless steelsGG, GGGaluminium and copper alloys, long-chipping materialstitanium and nickel alloyshard steels up to 62 HRcsteels up to 1400 N/mm 2steels stainless steelsPreisangaben All Artikel prices mit in fettgedruckten euro, in Euro, VAT excluded zzgl Preisen MwSt. = LagerwareArtikel mit Prices fettgedruckten Preisangaben in bold print Preisen in = Euro, delivery = zzgl Lagerware ex MwSt. stock10-71


Hand tap<strong>Drilling</strong>• metric ISO thread DIN 13• Cutting material HSS and HSS-E• for through-hole threads and blind-hole threads• 3-part Kit, consisting of taper tap, second tap and bottom tap (VS, MS and FS)Taper tap Form ASecond tap Form DBottom tap Form CTaper tap, second tap and bottom tap, individualDmmPitchmmLmmL1mmD1mmCmm3-part Kit SARA HSSart.no.3-part ATORN set HSSart.no.ATORN HSS VSart.no.ATORN HSS MSart.no.ATORN HSS FSart.no.M 1 0,25 32 5,5 2,5 2,1 130130 0010M 1.2 0,25 32 5,5 2,5 2,1 130130 0012M 1.4 0,3 32 7 2,5 2,1 130130 0014M 1.6 0,35 32 8 2,5 2,1 130130 0016M 1.7 0,35 32 8 2,5 2,1 130130 0017M 1.8 0,35 32 8 2,5 2,1 130130 0018M 2 0,4 36 10 2,8 2,1 130101 0020 130130 0020 130131 0020 130132 0020 130133 0020M 2.2 0,45 36 11 2,8 2,1 130101 0022M 2.3 0,4 36 11 2,8 2,1 130101 0023 130130 0023M 2,5 0,45 40 12 2,8 2,1 130101 0025 130130 0025M 2.6 0,45 40 12 2,8 2,1 130101 0026 130130 0026 130131 0026 130132 0026 130133 0026M 3 0,5 40 12 3,5 2,7 130101 0030 130130 0030 130131 0030 130132 0030 130133 0030M 3.5 0,6 45 14 4 3 130101 0035 130130 0035M 4 0,7 45 14 4,5 3,4 130101 0040 130130 0040 130131 0040 130132 0040 130133 0040M 4.5 0,75 45 14 4,5 3,4 130101 0045 130130 0045M 5 0,8 48 16 6 4,9 130101 0050 130130 0050 130131 0050 130132 0050 130133 0050M 6 1 50 18 6 4,9 130101 0060 130130 0060 130131 0060 130132 0060 130133 0060M 7 1 50 18 6 4,9 130101 0070 130130 0070M 8 1,25 56 22 6 4,9 130101 0080 130130 0080 130131 0080 130132 0080 130133 0080M 9 1,25 63 22 7 5,5 130101 0090 130130 0090M 10 1,5 70 25 7 5,5 130101 0100 130130 0100 130131 0100 130132 0100 130133 0100M 11 1,5 70 25 8 6,2 130101 0110 130130 0110 130133 0110M 12 1,75 75 30 9 7 130101 0120 130130 0120 130131 0120 130132 0120 130133 0120M 14 2 80 32 11 9 130101 0140 130130 0140M 16 2 80 32 12 9 130101 0160 130130 0160M 18 2,5 95 40 14 11 130101 0180 130130 0180M 20 2,5 95 40 16 12 130101 0200 130130 0200M 22 2,5 100 40 18 14,5 130101 0220M 24 3 110 50 18 14,5 130101 0240 130130 0240M 27 3 110 50 20 16 130101 0270M 30 3,5 132 56 22 18 130101 0300M 33 3,5 132 56 25 20 130101 0330M 36 4 150 63 28 22 130101 0360 130130 0360M 39 4 150 63 32 24 130101 0390M 42 4,5 150 63 32 24 130101 0420 130130 0420M 45 4,5 160 70 36 29 130101 0450M 48 5 180 75 36 29 130101 0480M 52 5 180 75 40 32 130101 05201125 1125 1125 1125 1125materialDmmPitchmmLmmL1mmD1mmCmmHSS-Eart.no.ATORN HSS-E VSart.no.ATORN HSS-E MSart.no.ATORN HSS-E FSart.no.M 2 0,4 36 10 2,8 2,1 130126 0020 130127 0020 130128 0020 130129 0020M 2,5 0,45 40 12 2,8 2,1 130126 0025 130127 0025 130128 0025 130129 0025M 3 0,5 40 12 3,5 2,7 130126 0030 130127 0030 130128 0030 130129 0030M 3.5 0,6 45 14 4 3 130126 0035 130127 0035 130128 0035 130129 0035M 4 0,7 45 14 4,5 3,4 130126 0040 130127 0040 130128 0040 130129 0040M 5 0,8 48 16 6 4,9 130126 0050 130127 0050 130128 0050 130129 0050M 6 1 50 18 6 4,9 130126 0060 130127 0060 130128 0060 130129 0060M 8 1,25 56 22 6 4,9 130126 0080 130127 0080 130128 0080 130129 0080M 10 1,5 70 25 7 5,5 130126 0100 130127 0100 130128 0100 130129 0100M 12 1,75 75 30 9 7 130126 0120 130127 0120 130128 0120 130129 0120M 16 2 80 32 12 9 130126 0160 130127 0160 130128 0160 130129 0160M 20 2,5 95 40 16 12 130126 0200 130127 0200 130128 0200 130129 02001125 1125 1125 1125very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetATORN HSS-E VS3-part Kit SARA HSS3-part ATORN set HSS10-72


Hand tap, left-handed thread• Metric ISO left-handed thread DIN 13• 3-part Kit, consisting of taper tap, second tap and bottom tap• Cutting material HSS• for through-hole threads and blind-hole threads<strong>Drilling</strong>materialDmmPitchmmLmmL1mmD1mmCmmM 4 0,7 45 14 4,5 3,4 130134 0040Taper tap Form A Second tapM 5 0,8 48 16 6 4,9 130134 0050Form D Bottom tap Form CM 6 1 50 18 6 4,9 130134 0060M 8 1,25 56 22 6 4,9 130134 0080M 10 1,5 70 25 7 5,5 130134 0100M 12 1,75 75 30 9 7 130134 0120M 14 2 80 32 11 9 130134 0140M 16 2 80 32 12 9 130134 0160M 20 2,5 95 40 16 12 130134 02001125very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetart.no.M-LHHand tap• metric ISO thread DIN 13• Cutting material HSS-E vaporized, HSS-E nitrified, HSS-PM nitrided• for through-hole threads and blind-hole threads• 3-part Kit, consisting of taper tap, second tap and bottom tap (VS, MS and FS)• up to M12 taper tap with pilot pinTaper tap Form ASecond tap Form DBottom tap Form CTaper tap, second tap and bottom tap, individualDmmPitchmmLmmL1mmD1mmCmmSet SARA HSS-E, vaporisedart.no.ATORN set HSS-E, nitridedart.no.M 2 0,4 36 12 2,8 2,1 130135 0020 130136 0020 130137 0020 130138 0020M 2,5 0,45 40 12 2,8 2,1 130135 0025M 3 0,5 40 12 3,5 2,7 130110 0030 130135 0030 130136 0030 130137 0030 130138 0030M 4 0,7 45 14 4,5 3,4 130110 0040 130135 0040 130136 0040 130137 0040 130138 0040M 5 0,8 48 16 6 4,9 130110 0050 130135 0050 130136 0050 130137 0050 130138 0050M 6 1 50 18 6 4,9 130110 0060 130135 0060 130136 0060 130137 0060 130138 0060M 8 1,25 56 22 6 4,9 130110 0080 130135 0080 130136 0080 130137 0080 130138 0080M 10 1,5 70 25 7 5,5 130110 0100 130135 0100 130136 0100 130137 0100 130138 0100M 12 1,75 75 30 9 7 130110 0120 130135 0120 130136 0120 130137 0120 130138 0120M 14 2 80 32 11 9 130110 0140 130135 0140M 16 2 80 32 12 9 130110 0160 130135 01601125 1125 1125 1125 1125art.no.VSart.no.MSart.no.FSmaterialDmmPitchmmLmmL1mmD1mmCmmATORN set HSS-PM,nitridedart.no.M 3 0,5 40 12 3,5 2,7 130144 0030M 4 0,7 45 14 4,5 3,4 130144 0040 130145 0040 130146 0040 130147 0040M 5 0,8 48 16 6 4,9 130144 0050 130145 0050 130146 0050 130147 0050M 6 1 50 18 6 4,9 130144 0060 130145 0060 130146 0060 130147 0060M 8 1,25 56 22 6 4,9 130144 0080 130145 0080 130146 0080 130147 00801125 1125 1125 1125very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetATORN set HSS-PM,Set SARA HSS-E,ATORN set HSS-E, nitridedart.no.VSart.no.MSart.no.FSAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-73


Hand tap<strong>Drilling</strong>• metric ISO 6H fine thread DIN 13• 2-part Kit, consisting of taper tap and bottom tap• Cutting material HSS• for through-hole threads and blind-hole threads• Individual taps are available on requestTaper tap Form DBottom tap Form CmaterialDmmPitchmmLmmL1mmD1mmCmmSARAart.no.ATORNart.no.M 3 0,35 40 9 3,5 2,7 130105 0005M 3.5 0,35 45 10 4 3 130105 0006M 4 0,5 45 10 4,5 3,4 130105 0007 130139 0007M 5 0,5 50 12 6 4,9 130105 0009 130139 0009M 6 0,75 50 12 6 4,9 130105 0010 130139 0010M 6 0,5 50 12 6 4,9 130139 0054M 7 0,75 50 14 6 4,9 130105 0011 130139 0011M 8 1 56 16 6 4,9 130105 0012 130139 0012M 8 0,75 50 16 6 4,9 130105 0013 130139 0013M 8 0,5 50 16 6 4,9 130139 0055M 9 1 63 16 7 5,5 130105 0014M 10 1,25 70 20 7 5,5 130105 0015 130139 0015M 10 1 63 16 7 5,5 130105 0016 130139 0016M 10 0,75 63 16 7 5,5 130105 0017 130139 0017M 11 1 63 16 8 6,2 130105 0018M 12 1,5 75 20 9 7 130105 0019 130139 0019M 12 1,25 63 20 9 7 130105 0020 130139 0020M 12 1 63 20 9 7 130105 0021 130139 0021M 12 0,75 63 20 9 7 130105 0022M 14 1,5 70 20 11 9 130105 0023 130139 0023M 14 1,25 70 20 11 9 130105 0024 130139 0024M 14 1 70 20 11 9 130105 0025 130139 0025M 15 1,5 70 20 12 9 130105 0026M 15 1 70 20 12 9 130105 0027 130139 0027M 16 1,5 70 20 12 9 130105 0028 130139 0028M 16 1,25 70 20 12 9 130105 0029M 16 1 70 20 12 9 130105 0030 130139 0030M 18 1,5 80 20 14 11 130105 0031 130139 0031M 18 1 80 20 14 11 130105 0032 130139 0032M 20 1,5 80 22 16 12 130105 0033 130139 0033M 20 1 80 22 16 12 130105 0034 130139 0034M 22 1,5 80 22 18 14,5 130105 0035 130139 0035M 22 1 80 22 18 14,5 130105 0036M 24 2 80 22 18 14,5 130105 0037 130139 0037M 24 1,5 80 22 18 14,5 130105 0038 130139 0038M 24 1 80 22 18 14,5 130105 0039 130139 0039M 25 1,5 80 22 18 14,5 130105 0041M 26 1,5 80 22 18 14,5 130105 0042M 27 2 90 22 20 16 130105 0043 130139 0043M 27 1,5 90 22 20 16 130105 0044M 28 2 90 22 20 16 130105 0045M 28 1,5 90 22 20 16 130105 0046M 30 2 90 22 22 18 130105 0047 130139 0047M 30 1,5 90 22 22 18 130105 0048 130139 0048M 32 1,5 90 22 22 18 130105 0050M 36 3 150 63 28 22 130105 0051M 36 2 100 25 28 22 130105 0052M 36 1,5 100 25 28 22 130139 00561125 1125very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSARAATORN10-74


Hand tap UNC• UNC (unified national coarse)• 3-part Kit, consisting of taper tap, second tap and bottom tap• Cutting material HSS• for through-hole threads and blind-hole threadsTaper tap Form ASecond tap Form D<strong>Drilling</strong>materialSizeUNCPitchGang/ZollDmmLmmL1mmD1mmCmm art.no.3-48 48 2,52 40 9 2,8 2,1 130140 0001Bottom tap Form C4-40 40 2,85 40 11 3,5 2,7 130140 00025-40 40 3,18 40 11 3,5 2,7 130140 00036-32 32 3,51 45 12 4,0 3,0 130140 00048-32 32 4,17 45 13 4,5 3,4 130140 000510-24 24 4,83 50 14 6,0 4,9 130140 00061/4”-20 20 6,35 50 16 6,0 4,9 130140 00075/16”-18 18 7,94 56 18 6,0 4,9 130140 00083/8”-16 16 9,53 70 20 7,0 5,5 130140 00097/16”-14 14 11,11 75 22 8,0 6,2 130140 00101/2”-13 13 12,70 75 25 9,0 7,0 130140 00115/8”-11 11 15,88 80 30 12,0 9,0 130140 00123/4”-10 10 19,05 95 33 14,0 11,0 130140 00137/8”-9 9 22,23 100 35 18,0 14,5 130140 00141125very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetHand tap UNF• UNF thread (unified national fine thread)• 2-part Kit, consisting of taper tap and bottom tap• Cutting material HSS• for through-hole threads and blind-hole threadsTaper tap Form D Bottom tapForm CmaterialSizeUNFPitchGang/ZollDmmLmmL1mmD1mmCmm art.no.4-48 48 2,85 40 10 3,5 2,7 130141 00016-40 40 3,51 45 11 4,0 3,0 130141 00028-36 36 4,17 45 12 4,5 3,4 130141 000310-32 32 4,83 50 14 6,0 4,9 130141 000412-28 28 5,49 50 16 6,0 4,9 130141 00051/4”-28 28 6,35 50 17 6,0 4,9 130141 00065/16”-24 24 7,94 56 17 6,0 4,9 130141 00073/8”-24 24 9,53 63 18 7,0 5,5 130141 00087/16”-20 20 11,11 63 20 8,0 6,2 130141 00091/2”-20 20 12,70 63 20 9,0 7,0 130141 00109/16”-18 18 14,29 70 20 11,0 9,0 130141 00115/8”-18 18 15,88 70 20 12,0 9,0 130141 00121125very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetwww.atorn.deLa forza necessita di qualità.I maschiatori ATORN:• massima velocità di taglio• rettifica di precisione per la massima sicurezza nel processo• codifica con anelli colorati a norma ISO per una semplice identificazioneUn esempio di qualità degli utensili di perforazione ATORN.All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-75


Hand tap BSW<strong>Drilling</strong>• Withworth DIN 11• 3-part Kit, consisting of taper tap, second tap and bottom tap• Cutting material HSS• for through-hole threads and blind-hole threads• Individual taps are available on request• Note: For Whitworth threads in accordance with BSI standard BS 84 in medium tolerance fi eld.Taper tap Form ASecond tap Form DBottom tap Form CDmmPitchGang/ZollLmmL1mmD1mmCmmSARAart.no.ATORNart.no.W 3/32” 48 36 11 2,8 2,1 130115 0001W 1/8” 40 40 12 3,5 2,7 130115 0002 130142 0002W 5/32” 32 45 14 4,5 3,4 130115 0003 130142 0003W 3/16” 24 45 14 5,5 4,3 130115 0004 130142 0004W 7/32” 24 48 16 6 4,9 130115 0005 130142 0005W 1/4” 20 50 18 6 4,9 130115 0006 130142 0006W 5/16” 18 56 22 6 4,9 130115 0007 130142 0007W 3/8” 16 63 22 7 5,5 130115 0008 130142 0008W 7/16” 14 70 25 8 6,2 130115 0009W 1/2” 12 80 30 8 7 130115 0010 130142 0010W 9/16” 12 80 32 11 9 130115 0011W 5/8” 11 80 32 12 9 130115 0012 130142 0012W 3/4” 10 95 40 14 11 130115 0013 130142 0013W 7/8” 9 100 40 18 14,5 130115 0015W 1” 8 110 50 20 16 130115 00161125 1125very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSARAmaterialATORNHand tap G• British Standard Withworth, DIN 5157• 2-part Kit, consisting of taper tap and bottom tap• Cutting material HSS• for through-hole threads and blind-hole threads• Individual taps are available on request• Note: For cylindrical pipe threads DIN-ISO 228/1Taper tap Form DBottom tap Form CDmmPitchGang/ZollLmmL1mmD1mmCmmSARAart.no.ATORNart.no.G 1/8” 28 63 20 7 5,5 130120 0001 130143 0001G 1/4” 19 70 22 11 9 130120 0002 130143 0002G 3/8” 19 70 22 12 9 130120 0003 130143 0003G 1/2” 14 80 22 16 12 130120 0004 130143 0004G 5/8” 14 80 22 18 14,5 130120 0005G 3/4” 14 90 22 20 16 130120 0006 130143 0006G 7/8” 14 90 22 22 18 130120 0007G 1” 11 100 25 25 20 130120 0008G 1 1/8” 11 125 40 28 22 130120 0009G 1 1/4” 11 125 40 32 24 130120 0010G 1 3/8” 11 125 40 36 29 130120 0011G 1 1/2” 11 140 40 36 29 130120 0012G 1 3/4” 11 140 40 40 32 130120 0013G 2” 11 160 40 45 35 130120 00141125 1125very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSARAmaterialATORN10-76


•Machine tap, short modelNEW •NUOVO •NYN O U VEAU •• metric ISO 6H thread• linear fluted, with spiral point, Form B, 3.5 - 5 thread chamfer• DIN 352• Cutting material HSS-E• for through-hole threads• The spiral point ensures chip removal to the front• possible depth of thread 3 x DN UEVO •<strong>Drilling</strong>materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 2 0,4 36 8 2,8 2,1 135360 0020M 2,5 0,45 40 9 2,8 2,1 135360 0025M 3 0,5 40 10 3,5 2,7 135360 0030M 4 0,7 45 12 4,5 3,4 135360 0040M 5 0,8 50 14 6,0 4,9 135360 0050M 6 1,25 56 14 6,0 4,9 135360 0060M 8 1,5 63 18 6,0 4,9 135360 0080M 10 1,75 70 20 7,0 5,5 135360 0100M 12 2,0 75 24 9,0 7,0 135360 0120M 16 2,0 80 26 12,0 9,0 135360 01601127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSafety at the workplacePlease protect your eyes, hearing and respiratory organs!Ear protectorsSafety gogglesatBreathing protection apparStartingon90-48pageStartingon90-45pageStartingonpage90-50usAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-77


Machine tap<strong>Drilling</strong>• metric ISO 6H thread, right and left• linear fl uted, with spiral point, Form B, 3.5 - 5 thread chamfer• DIN 371 = to M 10, DIN 376 = from M12• Cutting material HSS-E, HSS-E TiN, HSS-E TiCN• for through-hole threads• the spiral point ensures strong chip removal to the front• possible depth of thread 3 x DRightDmmPitchmmLmmL1mmD1mmCmm art.no.TiN-coatedart.no.TiCN Coatedart.no.M 2 0,4 45 8 2,8 2,1 134105 0020M 2,5 0,45 50 9 2,8 2,1 134105 0025M 3 0,5 56 10 3,5 2,7 134105 0030 134110 0030 134115 0030M 3.5 0,6 56 11 4 3 134105 0035 134110 0035 134115 0035M 4 0,7 63 12 4,5 3,4 134105 0040 134110 0040 134115 0040M 5 0,8 70 14 6 4,9 134105 0050 134110 0050 134115 0050M 6 1,0 80 16 6 4,9 134105 0060 134110 0060 134115 0060M 7 1,0 80 16 7 5,5 134105 0070M 8 1,25 90 18 8 6,2 134105 0080 134110 0080 134115 0080M 10 1,5 100 20 10 8 134105 0100 134110 0100 134115 0100M 12 1,75 110 22 9 7 134105 0120 134110 0120 134115 0120M 14 2,0 110 25 11 9 134105 0140 134110 0140 134115 0140M 16 2,0 110 28 12 9 134105 0160 134110 0160 134115 0160M 18 2,5 125 32 14 11 134105 0180 134110 0180 134115 0180M 20 2,5 140 32 16 12 134105 0200 134110 0200 134115 0200M 22 2,5 140 32 18 14,5 134105 0220M 24 3,0 160 36 18 14,5 134105 0240 134110 0240 134115 0240M 27 3,0 160 36 20 16 134105 0270 134110 0270M 30 3,5 180 40 22 18 134105 03001127 1127 1127LeftDmmPitchmmLmmL1mmD1mmCmm art.no.M 4-LH 0,7 63 12 4,5 3,4 134120 0040M 5-LH 0,8 70 14 6 4,9 134120 0050M 6-LH 1,0 80 16 6 4,9 134120 0060M 8-LH 1,25 90 18 8 6,2 134120 0080M 10-LH 1,5 100 20 10 8 134120 0100M 12-LH 1,75 110 22 9 7 134120 0120M 14-LH 2,0 110 25 11 9 134120 0140M 16-LH 2,0 110 28 12 9 134120 0160M 20-LH 2,5 140 32 16 12 134120 02001127right, long design (company standard)materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 112 10 3,5 2,7 134125 0030M 4 0,7 126 12 4,5 3,4 134125 0040M 5 0,8 140 14 6 4,9 134125 0050M 6 1,0 160 16 6 4,9 134125 0060M 8 1,25 180 18 8 6,2 134125 0080M 10 1,5 200 20 10 8 134125 0100M 12 1,75 220 22 9 7 134125 0120M 14 2,0 220 25 11 9,0 134125 0140M 16 2,0 220 28 12 9,0 134125 0160M 20 2,5 280 32 16 12,0 134125 02001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-78


Machine tap POT• metric ISO 6H thread• linear fl uted, with spiral point• Type C, 2-3 thread chamfer• for through-hole threads• Cutting material HSS-E V3• on request also available with TiN-coating<strong>Drilling</strong>DIN 371DmmPitchmmLmmL1mmD1mmCmmTapping hole ØmmDIN 371art.no.M 2 0,4 45 8 2,8 2,1 1,6 133001 0020M 2,5 0,45 50 9 2,8 2,1 2,1 133001 0025M 3 0,5 56 11 3,5 2,7 2,5 133001 0030M 3.5 0,6 56 13 4,0 3,0 2,9 133001 0035M 4 0,7 63 13 4,5 3,4 3,3 133001 0040M 5 0,8 70 16 6,0 4,9 4,2 133001 0050M 6 1,0 80 19 6,0 4,9 5,0 133001 0060M 8 1,25 90 22 8,0 6,2 6,8 133001 0080M 10 1,5 100 24 10,0 8,0 8,5 133001 01001128DIN 376materialDmmPitchmmLmmL1mmD1mmCmmTapping hole ØmmDIN 376art.no.M 3 0,5 56 11 2,2 - 2,5 133005 0030M 4 0,7 63 13 2,8 2,1 3,3 133005 0040M 5 0,8 70 16 3,5 2,7 4,2 133005 0050M 6 1,0 80 19 4,5 3,4 5,0 133005 0060M 8 1,25 90 22 6,0 4,9 6,8 133005 0080M 10 1,5 100 24 7,0 5,5 8,5 133005 0100M 12 1,75 110 29 9,0 7,0 10,25 133005 0120M 14 2,0 110 30 11,0 9,0 12,0 133005 0140M 16 2,0 110 32 12,0 9,0 14,0 133005 0160M 18 2,5 125 34 14,0 11,0 15,5 133005 0180M 20 2,5 140 34 16,0 12,0 17,5 133005 0200M 22 2,5 140 34 18,0 14,5 19,5 133005 0220M 24 3,0 160 38 18,0 14,5 21,0 133005 0240M 27 3,0 160 38 20,0 16,0 24,0 133005 0270M 30 3,5 180 45 22,0 18,0 26,5 133005 03001128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• Extra long, metric ISO 6H thread• Linear fl uted, with extra-long shank• approx. 20 thread chamfer• Cutting material HSS-E• for through-hole threads• possible depth of thread 3 x DmaterialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 70 22 2,2 - 135100 0030M 4 0,7 90 25 2,8 2,1 135100 0040M 5 0,8 100 28 3,5 2,7 135100 0050M 6 1 110 32 4,5 3,4 135100 0060M 8 1,25 125 40 6,0 4,9 135100 0080M 10 1,5 140 45 7,0 5,5 135100 0100M 12 1,75 180 50 9,0 7,0 135100 0120M 16 2 200 63 12,0 9,0 135100 0160M 20 2,5 250 70 16,0 12,0 135100 02001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-79


Machine tap<strong>Drilling</strong>• metric ISO 6H thread• linear fl uted, with spiral point, Form B, 3.5 - 5 thread chamfer• DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E• for through-hole threads• with enlarged chip space• the spiral point ensures strong chip removal to the front• Possible depths of thread 3 x DAluminiummaterialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,50 56 10 3,5 2,7 134127 0030M 4 0,70 63 12 4,5 3,4 134127 0040M 5 0,80 70 14 6,0 4,9 134127 0050M 6 1,0 80 16 6,0 4,9 134127 0060M 8 1,25 90 18 8,0 6,2 134127 0080M 10 1,50 100 20 10,0 8,0 134127 0100M 12 1,75 110 22 9,0 7,0 134127 01201127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• metric ISO 6H thread• linear fl uted• with spiral point, Form B, 3.5 - 5 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E, vaporised, HSS-E TiN-coated• for through-hole threads• possible depth of thread 3 x DINOXmaterialDmmPitchmmLmmL1mmD1mmCmmvaporizedart.no.TiN-coatedart.no.M 2 0,4 45 8 2,8 2,1 134130 0020M 2,5 0,45 50 9 2,8 2,1 134130 0025M 3 0,5 56 10 3,5 2,7 134130 0030 134131 0030M 4 0,7 63 12 4,5 3,4 134130 0040 134131 0040M 5 0,8 70 14 6 4,9 134130 0050 134131 0050M 6 1,0 80 16 6 4,9 134130 0060 134131 0060M 8 1,25 90 18 8 6,2 134130 0080 134131 0080M 10 1,5 100 20 10 8,0 134130 0100 134131 0100M 12 1,75 110 22 9 7,0 134130 0120 134131 0120M 16 2,0 110 28 12 9,0 134130 0160 134131 0160M 20 2,5 140 32 16 12,0 134130 02001127 1127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-80


Machine tap VA-POT• metric ISO 6H thread and ISO 6G thread• linear fl uted, with spiral point• Form B, 4 thread chamfer• for through-hole threads• Cutting material HSS-E V3 vaporised<strong>Drilling</strong>ISO-6H; DIN 371DmmPitchmmLmmL1mmD1mmCmmTapping hole ØmmISO-6Hart.no.M 2 0,4 45 8 2,8 2,1 1,6 133015 0020M 2.2 0,45 45 9 2,8 2,1 1,7 133015 0022M 2,5 0,45 50 9 2,8 2,1 2,1 133015 0025M 3 0,5 56 11 3,5 2,7 2,5 133015 0030M 3.5 0,6 56 11 4,0 3 2,9 133015 0035M 4 0,7 63 13 4,5 3,4 3,3 133015 0040M 5 0,8 70 16 6,0 4,9 4,2 133015 0050M 6 1,0 80 19 6,0 4,9 5,0 133015 0060M 8 1,25 90 22 8,0 6,2 6,8 133015 0080M 10 1,5 100 24 10,0 8,0 8,5 133015 01001128ISO-6G; DIN 371DmmPitchmmLmmL1mmD1mmCmmTapping hole ØmmISO-6Gart.no.M 2 0,4 45 8 2,8 2,1 1,6 133020 0020M 2,5 0,45 50 9 2,8 2,1 2,1 133020 0025M 3 0,5 56 11 3,5 2,7 2,5 133020 0030M 4 0,7 63 13 4,5 3,4 3,3 133020 0040M 5 0,8 70 16 6,0 4,9 4,2 133020 0050M 6 1,0 80 19 6,0 4,9 5,0 133020 0060M 8 1,25 90 22 8,0 6,2 6,8 133020 0080M 10 1,5 100 24 10,0 8,0 8,5 133020 01001128ISO-6H; DIN 376DmmPitchmmLmmL1mmD1mmCmmTapping hole ØmmISO-6H DIN 376art.no.M 3 0,5 56 11 2,2 - 2,5 133025 0030M 4 0,7 63 13 2,8 2,1 3,3 133025 0040M 5 0,8 70 16 3,5 2,7 4,2 133025 0050M 6 1,0 80 19 4,5 3,4 5,0 133025 0060M 8 1,25 90 22 6,0 4,9 6,8 133025 0080M 10 1,5 100 24 7,0 5,5 8,5 133025 0100M 12 1,75 110 29 9,0 7,0 10,25 133025 0120M 14 2,0 110 30 11,0 9,0 12,0 133025 0140M 16 2,0 110 32 12,0 9,0 14,0 133025 0160M 18 2,5 125 34 14,0 11,0 15,5 133025 0180M 20 2,5 140 34 16,0 12,0 17,5 133025 0200M 22 2,5 140 34 18,0 14,5 19,5 133025 0220M 24 3,0 160 38 18,0 14,5 21,0 133025 0240M 27 3,0 160 38 20,0 16,0 24,0 133025 0270M 30 3,5 180 45 22,0 18,0 26,5 133025 0300M 36 4,0 200 56 28,0 22,0 32,0 133025 03601128ISO-6G; DIN 376materialDmmPitchmmLmmL1mmD1mmCmmTapping hole ØmmISO-6G DIN 376art.no.M 12 1,75 110 29 9,0 7,0 10,25 133030 0120M 14 2,0 110 30 11,0 9,0 12,0 133030 0140M 16 2,0 110 32 12,0 9,0 14,0 133030 01601128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-81


•Machine tap<strong>Drilling</strong>• metric ISO 6H thread• linear fl uted• with spiral point, Form B, 3.5 - 5 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E, HSS-E TiCN-coated• for through-hole threads• possible depth of thread 3 x Dup to 1400 N/mm²materialDmmPitchmmLmmL1mmD1mmCmm art.no.TiCN Coatedart.no.M 3 0,5 56 10 3,5 2,7 134135 0030 134137 0030M 4 0,7 63 12 4,5 3,4 134135 0040 134137 0040M 5 0,8 70 14 6 4,9 134135 0050 134137 0050M 6 1,0 80 16 6 4,9 134135 0060 134137 0060M 8 1,25 90 18 8 6,2 134135 0080 134137 0080M 10 1,5 100 20 10 8,0 134135 0100 134137 0100M 12 1,75 110 22 9 7,0 134135 0120 134137 0120M 16 2,0 110 28 12 9,0 134135 0160 134137 0160M 20 2,5 140 32 16 12,0 134135 0200 134137 02001127 1127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetUniversal machine tapNEW •NUOVO •NY• metric ISO 6H thread• linear fluted with spiral point• Type B, 3.5-5 thread chamfer• Constructional dimensions DIN 371 = up to M 10, DIN 376 = from M12• Cutting material HSS-E TiN-coated, HSS-E PM TiN-coated• for through-hole threads• possible depth of thread 3 x D• Suitable for conventional and CNC machining using synchronised tap chucksN O U VEAU •N UEVO •materialDmmPitchmmLmmL1mmD1mmCmmHSS-E TiN-coatedart.no.HSS-PM-TiN-coatedart.no.M 2 0,4 45 8 2,8 2,1 134570 0020M 3 0,5 56 10 3,5 2,7 135385 0030 134570 0030M 4 0,7 63 12 4,5 3,4 135385 0040 134570 0040M 5 0,8 70 14 6 4,9 135385 0050 134570 0050M 6 1,0 80 16 6 4,9 135385 0060 134570 0060M 8 1,25 90 18 8 6,2 135385 0080 134570 0080M 10 1,5 100 20 10 8,0 135385 0100 134570 0100M 12 1,75 110 24 9 7,0 135385 0120 134570 0120M 14 2,0 110 26 11 9,0 135385 0140 134570 0140M 16 2,0 110 26 12 9,0 135385 0160 134570 0160M 18 2,5 125 30 14 11,0 135385 0180 134570 0180M 20 2,5 140 32 16 12,0 135385 0200 134570 0200M 24 3,0 160 36 18 14,5 135385 02401127 1127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-82


Machine tap• metric ISO 6H thread• linear fl uted• Type C, 2-3 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E-PM TiCN-coated• for through-hole threads• possible depth of thread 3 x DOptimally suited forsteel and INOX<strong>Drilling</strong>materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 56 6 3,5 2,7 134196 0305M 4 0,7 63 7 4,5 3,4 134196 0407M 5 0,8 70 8 6 4,9 134196 0508M 6 1,0 80 10 6 4,9 134196 0610M 8 1,25 90 13 8 6,2 134196 0812M 10 1,5 100 15 10 8 134196 1015M 12 1,75 110 18 9 7 134196 1217M 16 2,0 110 20 12 9 134196 16201127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap Z-POT• metric ISO 6H thread• linear fl uted, with spiral point• Form B, 4 thread chamfer• for through-hole threads• Version with coolant bores available on request• Cutting material PM powder coating (Co5 + V5) TiCN-coated (V)DIN 371DmmPitchmmLmmL1mmL2mmD1mmCmmTapping hole ØmmDIN 371art.no.M 2 0,4 45 8 - 2,8 2,1 1,6 133045 0020M 2,5 0,45 50 9 - 2,8 2,1 2,1 133045 0025M 3 0,5 56 11 18 3,5 2,7 2,5 133045 0030M 4 0,7 63 13 21 4,5 3,4 3,3 133045 0040M 5 0,8 70 16 25 6,0 4,9 4,2 133045 0050M 6 1,0 80 19 30 6,0 4,9 5,0 133045 0060M 8 1,25 90 22 35 8,0 6,2 6,75 133045 0080M 10 1,5 100 24 39 10,0 8,0 8,5 133045 01001128DIN 376DmmmaterialPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.M 12 1,75 110 29 9 7 10,25 133050 0120M 14 2,0 110 30 11 9 12,0 133050 0140M 16 2,0 110 32 12 9 14,0 133050 0160M 18 2,5 125 34 14 11 15,5 133050 0180M 20 2,5 140 34 16 12 17,5 133050 02001128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-83


<strong>Drilling</strong>Machine tap• Metric ISO 6HX thread• linear fl uted, with spiral point, Type C, 2 thread chamfer• DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E-PM- TiCN- coated• for through-hole threads• the spiral point ensures strong chip removal to the front• Possible depths of thread 2 x DTitan and superalloysmaterialDmmPitchmmLmmL1mmD1mmCmm art.no.M 2 0,4 45 8 2,8 2,1 135142 0020M 3 0,5 56 10 3,5 2,7 135142 0030M 3.5 0,6 56 12 4 3,0 135142 0035M 4 0,7 63 12 4,5 3,4 135142 0040M 5 0,8 70 14 6,0 4,9 135142 0050M 6 1,0 80 16 6,0 4,9 135142 0060M 8 1,25 90 17 8,0 6,2 135142 0080M 10 1,5 100 20 10,0 8,0 135142 0100M 12 1,75 110 24 9,0 7,0 135142 0120M 16 2,0 110 26 12,0 9,0 135142 01601127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• metric ISO 6H thread• linear fl uted, with exposed thread ridges• Type B, 3.5-5 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E• for through-hole threads, in materials that tend to jam• Thin-walled parts and pipes, possible depth of thread 3 x DmaterialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 56 10 3,5 2,7 135140 0030M 4 0,7 63 12 4,5 3,4 135140 0040M 5 0,8 70 14 6 4,9 135140 0050M 6 1,0 80 16 6 4,9 135140 0060M 8 1,25 90 17 8 6,2 135140 0080M 10 1,5 100 20 10 8 135140 0100M 12 1,75 110 24 9 7 135140 0120M 16 2,0 110 26 12 9 135140 01601127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• metric ISO 6H thread• Linear fl uted, form C, 2-3 thread chamfer• Cutting material HSS-E• For blind-hole and through-hole threads• possible depth of thread 1.5 x DmaterialDmmPitchmmLmmL1mmD1mmCmm art.no.M 4 0,7 63 7,5 2,8 2,1 135145 0040M 5 0,8 70 8,5 3,5 2,7 135145 0050M 6 1 80 11 4,5 3,4 135145 0060M 8 1,25 90 14 6 4,9 135145 0080M 10 1,5 100 16 7 5,5 135145 01001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-84


Machine tap• metric ISO 6H thread• linear fl uted• Type C, 2-3 thread chamfer• DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E• For blind-hole and through-hole threads, possible depth of thread 1.5 x D<strong>Drilling</strong>materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 2 0,4 45 4,5 2,8 2,1 135150 0020M 2,5 0,45 50 5,0 2,8 2,1 135150 0025M 3 0,5 56 6,0 3,5 2,7 135150 0030M 4 0,7 63 7,5 4,5 3,4 135150 0040M 5 0,8 70 8,5 6 4,9 135150 0050M 6 1,0 80 11 6 4,9 135150 0060M 8 1,25 90 14 8 6,2 135150 0080M 10 1,5 100 16 10 8 135150 0100M 12 1,75 110 18,5 9 7 135150 0120M 14 2,0 110 20 11 9 135150 0140M 16 2,0 110 20 12 9 135150 0160M 20 2,5 140 25 16 12 135150 02001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap V-XPM-HT• metric ISO 6H thread• linear fl uted, with spiral point• Type C, 2.5 thread chamfer• For blind-hole and through-hole threads• Cutting material XPM powder coating (Co10 + V5) TiCN-coated (V)materialDmmPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.M 3 0,5 46 11 3,5 2,7 2,5 133255 0030M 4 0,7 52 13 4,5 3,4 3,3 133255 0040M 5 0,8 60 16 6,0 4,9 4,2 133255 0050M 6 1,0 62 19 6,0 4,9 5,0 133255 0060M 8 1,25 70 22 6,0 4,9 6,8 133255 0080M 10 1,5 75 24 7,0 5,5 8,5 133255 0100M 12 1,75 82 29 9,0 7,0 10,25 133255 01201128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSolid carbide machine tap• metric ISO 6H thread• Type D, 3.5 - 5 thread chamfer, for blind-hole and through-hole threads• Similar to DIN 371, possible depth of thread 1.5 x D• Cutting material solid carbide, superfine grain TiCN-coatedHard machiningmaterialDmmPitchmmLmmL1mmD1mmCmmM 3 0,5 56 10 3,5 2,7 135170 0030M 4 0,7 63 12 4,5 3,4 135170 0040M 5 0,8 70 14 6 4,9 135170 0050M 6 1,0 80 16 6 4,9 135170 0060M 8 1,25 90 18 8 6,2 135170 0080M 10 1,5 100 20 10 8 135170 0100M 12 1,75 110 28 12 9 135170 0120M 16 2,0 110 40 16 12 135170 01601127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetart.no.TiCNAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-85


•Machine tap<strong>Drilling</strong>• Metric ISO 6HX thread• linear fl uted• Type C, 2-3 thread chamfer• DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E, nitrided• For blind-hole and through-hole threads, possible depth of thread 3 x DCast ironmaterialDmmPitchmmLmmL1mmD1mmCmmnitrifiedart.no.M 3 0,5 56 10 3,5 2,7 135155 0030M 4 0,7 63 12 4,5 3,4 135155 0040M 5 0,8 70 14 6 4,9 135155 0050M 6 1,0 80 17 6 4,9 135155 0060M 8 1,25 90 18 8 6,2 135155 0080M 10 1,5 100 20 10 8 135155 0100M 12 1,75 110 24 9 7 135155 0120M 16 2,0 110 26 12 9 135155 0160M 18 2,5 125 30 14 11 135155 0180M 20 2,5 140 32 16 12 135155 0200M 24 3,0 160 36 18 14,5 135155 02401127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSolid carbide machine tap VX-OT• metric ISO 6H thread• linear fl uted, with spiral point• Type C, 2.5 thread chamfer• For blind-hole and through-hole threads• Cutting material, solid carbide, superfine grain TiCN-coated (V)materialDmmPitchmmLmmL1mmL2mmD1mmCmmTapping hole Ømm art.no.M 3 0,5 46 11 19 3,5 2,7 2,5 133250 0030M 4 0,7 52 13 21 4,5 3,4 3,3 133250 0040M 5 0,8 60 16 24 6,0 4,9 4,2 133250 0050M 6 1,0 62 19 29 6,0 4,9 5,0 133250 0060M 8 1,25 70 22 22 6,0 4,9 6,8 133250 0080M 10 1,5 75 24 24 7,0 5,5 8,5 133250 0100M 12 1,75 82 29 29 9,0 7,0 10,25 133250 01201128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap, short modelNEW •NUOVO •NY• metric ISO 6H thread• Form C, 2-3 thread chamfer, for blind-hole threads• DIN 352• Cutting material HSS-E• possible depth of thread 2.5 x DN O U VEAU •N UEVO •materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 40 6 3,5 2,7 135395 0030M 4 0,7 45 7,5 3,4 3,4 135395 0040M 5 0,8 50 8,5 4,9 4,9 135395 0050M 6 1,0 56 11 4,9 4,9 135395 0060M 8 1,25 63 14 4,9 4,9 135395 0080M 10 1,5 70 16 5,5 5,5 135395 0100M 12 1,75 75 18,5 7,0 7,0 135395 0120M 16 2,0 80 20 9,0 9,0 135395 0160M 20 2,5 95 25 16,0 12,0 135395 02001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-86


•Machine tapNEW •NUOVO •NY• Metric ISO-6 LH thread• Form D, 3.5–5 thread chamfer• DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E• for through-hole threads• suitable for use with multiple spindles• possible depth of thread 3 x DN O U VEAU •N UEVO •<strong>Drilling</strong>materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 56 10 3,5 2,7 135365 0030M 4 0,7 63 12 4,5 3,4 135365 0040M 5 0,8 70 14 6 4,9 135365 0050M 6 1,0 80 16 6 4,9 135365 0060M 8 1,25 90 18 8 6,2 135365 0080M 10 1,5 100 20 10 8,0 135365 0100M 12 1,75 110 24 9 7,0 135365 0120M 14 2,0 110 26 11 9,0 135365 0140M 16 2,0 110 26 12 9,0 135365 0160M 20 2,5 140 32 16 12,0 135365 02001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• metric ISO 6H thread• Form C, 2-3 thread chamfer, for blind-hole threads• DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E, HSS-E TiN, HSS-E TiCN• suitable for use with multiple spindles• possible depth of thread 2.5 x DDmmPitchmmLmmL1mmD1mmCmm art.no.TiN-coatedart.no.TiCN Coatedart.no.M 2 0,4 45 8 2,8 2,1 134175 0020M 2.3 0,4 45 9 2,8 2,1 134175 0023M 2,5 0,45 50 9 2,8 2,1 134175 0025M 2.6 0,45 50 9 2,8 2,1 134175 0026M 3 0,5 56 10 3,5 2,7 134175 0030 134180 0030 134190 0030M 3.5 0,6 56 11 4 3 134175 0035M 4 0,7 63 12 4,5 3,4 134175 0040 134180 0040 134190 0040M 5 0,8 70 14 6 4,9 134175 0050 134180 0050 134190 0050M 6 1,0 80 16 6 4,9 134175 0060 134180 0060 134190 0060M 7 1,0 80 16 7 5,5 134175 0070M 8 1,25 90 18 8 6,2 134175 0080 134180 0080 134190 0080M 10 1,5 100 20 10 8 134175 0100 134180 0100 134190 0100M 12 1,75 110 22 9 7 134175 0120 134180 0120 134190 0120M 14 2,0 110 25 11 9 134175 0140M 16 2,0 110 28 12 9 134175 0160 134180 0160 134190 0160M 18 2,5 125 32 14 11 134175 0180M 20 2,5 140 32 16 12 134175 0200 134180 0200 134190 0200M 24 3,0 160 36 18 14,5 134175 0240M 30 3,5 180 40 22 18 134175 03001127 1127 1127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetmaterialAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-87


<strong>Drilling</strong>Machine tap• metric ISO 6H thread• Form C, 2 - 3 thread chamfer, 15°, helically fl uted• DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E-PM• for blind-hole threads, easy chip removal to the rear• possible depth of thread 2.5 x DTitan andsuperalloysmaterialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 56 10 3,5 2,7 134192 0030M 4 0,7 63 12 4,5 3,4 134192 0040M 5 0,8 70 14 6 4,9 134192 0050M 6 1,0 80 16 6 4,9 134192 0060M 8 1,25 90 18 8 6,2 134192 0080M 10 1,5 100 20 10 8,0 134192 0100M 12 1,75 110 22 9 7,0 134192 0120M 16 2,0 110 28 12 9,0 134192 01601127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetwww.atorn.deHigh quality for great performance.Short chucks by ATORN:• high-strength materials• perfect concentricity accuracy• large clamping range• high clamping forceThis is but one example of ATORN‘s high-quality clamping <strong>tools</strong>.10-88


Machine tap• metric ISO 6H thread, right and left• 40°, helically fl uted• Type C, 2-3 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E, HSS-E TiN, HSS-E TiCN• for blind-hole threads• strong chip removal to the rear for long-chipping materials• minimum thread-relief grinding• possible depth of thread 2.5 x D<strong>Drilling</strong>RightDmmPitchmmLmmL1mmD1mmCmm art.no.TiN-coatedart.no.TiCN Coatedart.no.M 2 0,4 45 8 2,8 2,1 134200 0020 134205 0020 134210 0020M 2,5 0,45 50 9 2,8 2,1 134200 0025 134205 0025 134210 0025M 3 0,5 56 10 3,5 2,7 134200 0030 134205 0030 134210 0030M 4 0,7 63 12 4,5 3,4 134200 0040 134205 0040 134210 0040M 5 0,8 70 14 6 4,9 134200 0050 134205 0050 134210 0050M 6 1 80 16 6 4,9 134200 0060 134205 0060 134210 0060M 8 1,25 90 18 8 6,2 134200 0080 134205 0080 134210 0080M 10 1,5 100 20 10 8 134200 0100 134205 0100 134210 0100M 12 1,75 110 22 9 7 134200 0120 134205 0120 134210 0120M 14 2 110 25 11 9 134200 0140 134210 0140M 16 2 110 28 12 9 134200 0160 134205 0160 134210 0160M 18 2,5 125 32 14 11 134200 0180M 20 2,5 140 32 16 12 134200 0200 134205 0200 134210 0200M 24 3 160 36 18 14,5 134200 0240 134205 0240M 30 3,5 180 40 22 18 134200 0300 134205 03001127 1127 1127LeftDmmPitchmmLmmL1mmD1mmCmm art.no.M 3-LH 0,5 56 10 3,5 2,7 134215 0030M 4-LH 0,7 63 12 4,5 3,4 134215 0040M 5-LH 0,8 70 14 6 4,9 134215 0050M 6-LH 1 80 16 6 4,9 134215 0060M 8-LH 1,25 90 18 8 6,2 134215 0080M 10-LH 1,5 100 20 10 8 134215 0100M 12-LH 1,75 110 22 9 7 134215 0120M 16-LH 2 110 28 12 9 134215 0160M 20-LH 2,5 140 32 16 12 134215 02001127right, long design (company standard)materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 112 10 3,5 2,7 134220 0030M 4 0,7 126 12 4,5 3,4 134220 0040M 5 0,8 140 14 6 4,9 134220 0050M 6 1 160 16 6 4,9 134220 0060M 8 1,25 180 18 8 6,2 134220 0080M 10 1,5 200 20 10 8 134220 0100M 12 1,75 220 22 9 7 134220 0120M 14 2 220 25 9 7 134220 0140M 16 2 220 28 12 9 134220 0160M 20 2,5 280 32 16 12 134220 02001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-89


•Machine tap SFT<strong>Drilling</strong>• metric ISO 6H thread• 40° helically fl uted, with spiral point• Type C, 2.5 thread chamfer• for blind-hole threads• Cutting material HSS-E V3• on request also available with TIN-coatingDIN 371DmmPitchmmLmmL1mmD1mmCmmTapping hole ØmmDIN 371art.no.M 2 0,4 45 8 2,8 2,1 1,6 133101 0020M 2,5 0,45 50 9 2,8 2,1 2,1 133101 0025M 3 0,5 56 5 3,5 2,7 2,5 133101 0030M 3.5 0,6 56 6 4,0 3,0 2,9 133101 0035M 4 0,7 63 7 4,5 3,4 3,3 133101 0040M 5 0,8 70 8 6,0 4,9 4,2 133101 0050M 6 1,0 80 10 6,0 4,9 5,0 133101 0060M 8 1,25 90 13 8,0 6,2 6,8 133101 0080M 10 1,5 100 15 10,0 8,0 8,5 133101 01001128DIN 376materialDmmPitchmmLmmL1mmD1mmCmmTapping hole ØmmDIN 376art.no.M 3 0,5 56 5 2,2 - 2,5 133105 0030M 4 0,7 63 7 2,8 2,1 3,3 133105 0040M 5 0,8 70 8 3,5 2,7 4,2 133105 0050M 6 1,0 80 10 4,5 3,4 5,0 133105 0060M 8 1,25 90 13 6,0 4,9 6,8 133105 0080M 10 1,5 100 15 7,0 5,5 8,5 133105 0100M 12 1,75 110 18 9,0 7,0 10,25 133105 0120M 14 2,0 110 20 11,0 9,0 12,0 133105 0140M 16 2,0 110 20 12,0 9,0 14,0 133105 0160M 18 2,5 125 25 14,0 11,0 15,5 133105 0180M 20 2,5 140 25 16,0 12,0 17,5 133105 0200M 22 2,5 140 25 18,0 14,5 21,0 133105 0220M 24 3,0 160 30 18,0 14,5 21,0 133105 0240M 27 3,0 160 30 20,0 16,0 24,0 133105 0270M 30 3,5 180 35 22,0 18,0 26,5 133105 03001128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tapNEW •NUOVO •NY• metric ISO 6H thread• Form C, 2–3 thread chamfer, 15°, helically fl uted with exposed ridges• DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E• for blind-hole threads, easy chip removal to the rear• possible depth of thread 2 x DN O U VEAU •N UEVO •materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 56 6,0 3,5 2,7 135390 0030M 4 0,7 63 7,5 4,5 3,4 135390 0040M 5 0,8 70 8,5 6 4,9 135390 0050M 6 1,0 80 11,0 6 4,9 135390 0060M 8 1,25 90 14,0 8 6,2 135390 0080M 10 1,5 100 16,0 10 8,0 135390 0100M 12 1,75 110 18,5 9 7,0 135390 0120M 16 2,0 110 20,0 12 9,0 135390 0160M 20 2,5 140 25,0 16 12,0 135390 02001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-90


Machine tap SUS-SFT• metric ISO 6H thread• 40° helically fl uted, with spiral point• Type C, 2.5 thread chamfer• for blind-hole threads• Due to its special cutting edge geometry, this tap produces very small,controlled chips, which ensures optimum chip removal.• Cutting material HSS-E V3 vaporised<strong>Drilling</strong>ISO-6H; DIN 371materialDmmPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.M 3 0,5 56 18 3,5 2,7 2,5 133110 0030M 4 0,7 63 21 4,5 3,4 3,3 133110 0040M 5 0,8 70 25 6,0 4,9 4,2 133110 0050M 6 1,0 80 30 6,0 4,9 5,0 133110 0060M 8 1,25 90 35 8,0 6,2 6,8 133110 0080M10 1,5 100 39 10,0 8,0 8,5 133110 01001128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap CC-SFT• Metric ISO 6HX thread• for materials that are difficult to machine• Controllable chips• for better thread surfaces• low machining temperature• improved service life• for blind-hole threads up to 3 x D• 45° helically fl uted• Type C, 2.5 thread chamfer• Material: HSS-E V3, CrN-coated• Tap for UNC, UNF and British Standard Withworth threadsavailable on requestChips from the CC-SFTChips from a conventional tapISO-6HX; DIN 371DmmPitchmmLmmL1mmD1mmCmmTapping hole ØmmDIN 371art.no.M 2 0,4 45 8 2,8 2,1 1,6 133106 0020M 2,5 0,45 50 10 2,8 2,1 2,1 133106 0025M 3 0,5 56 12 3,5 2,7 2,5 133106 0030M 4 0,7 63 16 4,5 3,4 3,3 133106 0040M 5 0,8 70 20 6,0 4,9 4,2 133106 0050M 6 1,0 80 24 6,0 4,9 5,0 133106 0060M 8 1,25 90 11 8,0 6,2 6,8 133106 0080M 10 1,5 100 14 10,0 8,0 8,5 133106 01001128ISO-6HX; DIN 376materialDmmPitchmmLmmL1mmD1mmCmmTapping hole ØmmDIN 376art.no.M 12 1,75 110 16 9 7 10,3 133107 0120M 14 2,0 110 18 11 9 12 133107 0140M 16 2,0 110 18 12 9 14 133107 0160M 18 2,5 125 23 14 11 15,5 133107 0180M 20 2,5 140 23 16 12 17,5 133107 02001128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-91


Machine tap<strong>Drilling</strong>• metric ISO 6H thread• Form C, 2-3 thread chamfer, 45°, helically fl uted• DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E• for blind-hole threads, with enlarged chip space, possible depth of thread 2.5 x DmaterialDmmPitchmmLmmL1mmD1mmCmm art.no.AluminiumM 2 0,4 45 8 2,8 2,1 134195 0020M 3 0,5 56 10 3,5 2,7 134195 0030M 4 0,7 63 12 4,5 3,4 134195 0040M 5 0,8 70 14 6 4,9 134195 0050M 6 1 80 16 6 4,9 134195 0060M 8 1,25 90 18 8 6,2 134195 0080M 10 1,5 100 20 10 8 134195 0100M 12 1,75 110 22 9 7 134195 01201127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap AL-SFT• metric ISO 6H thread• 45° helically fl uted, with spiral point• Type C, 2.5 thread chamfer, for blind-hole threads• Cutting material HSS-E V3AluminiummaterialDmmPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.M 1.6 0,35 40 8 2,5 2,1 1,25 133145 0016M 2 0,4 45 8 2,8 2,1 1,6 133145 0020M 2.2 0,45 45 9 2,8 2,1 1,7 133145 0022M 2,5 0,45 50 9 2,8 2,1 2,1 133145 0025M 3 0,5 56 5 3,5 2,7 2,5 133145 0030M 3.5 0,6 56 6 4,0 3,0 2,9 133145 0035M 4 0,7 63 7 4,5 3,4 3,3 133145 0040M 5 0,8 70 8 6,0 4,9 4,2 133145 0050M 6 1,0 80 10 6,0 4,9 5,0 133145 0060M 8 1,25 90 13 8,0 6,2 6,8 133145 0080M 10 1,5 100 15 10,0 8,0 8,5 133145 01001128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• metric ISO 6H thread• 45° helically fl uted• Type C, 2-3 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E-PM TiCN-coated• for deep blind-hole thread• easy chip removal to the rear, possible depth of thread 3 x DOptimally suited forsteel and INOXmaterialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 56 6 3,5 2,7 134193 0305M 4 0,7 63 7 4,5 3,4 134193 0407M 5 0,8 70 8 6 4,9 134193 0508M 6 1,0 80 10 6 4,9 134193 0610M 8 1,25 90 13 8 6,2 134193 0812M 10 1,5 100 15 10 8 134193 1015M 12 1,75 110 18 9 7 134193 1217M 16 2,0 110 20 12 9 134193 16201127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-92


Machine tap• metric ISO 6H thread• 40°, helically fl uted• Type C, 2-3 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E vaporised, HSS-E TiN-coated• For blind-hole threads, minimum thread relief grinding• possible depth of thread 2.5 x DINOX<strong>Drilling</strong>materialDmmPitchmmLmmL1mmD1mmCmmvaporizedart.no.TiN-coatedart.no.M 2 0,4 45 8 2,8 2,1 134225 0020M 2,5 0,45 50 9 2,8 2,1 134225 0025M 3 0,5 56 10 3,5 2,7 134225 0030 134226 0030M 4 0,7 63 12 4,5 3,4 134225 0040 134226 0040M 5 0,8 70 14 6 4,9 134225 0050 134226 0050M 6 1,0 80 16 6 4,9 134225 0060 134226 0060M 8 1,25 90 18 8 6,2 134225 0080 134226 0080M 10 1,5 100 20 10 8 134225 0100 134226 0100M 12 1,75 110 22 9 7 134225 0120 134226 0120M 16 2,0 110 25 11 9 134225 0160 134226 0160M 20 2,5 140 32 16 12 134225 02001127 1127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap Z-SFT• metric ISO 6H thread• 50° helically fl uted, with spiral point• Type C, 2.5 thread chamfer• for blind-hole threads• Version with coolant bores available on request• Cutting material PM powder coating (Co5 + V5) TiCN-coated (V)DIN 371DmmPitchmmLmmL1mmL2mmD1mmCmmTapping hole ØmmDIN 371art.no.M 3 0,5 56 5 18 3,5 2,7 2,5 133155 0030M 4 0,7 63 7 21 4,5 3,4 3,3 133155 0040M 5 0,8 70 8 25 6,0 4,9 4,2 133155 0050M 6 1,0 80 10 30 6,0 4,9 5,0 133155 0060M 8 1,25 90 13 35 8,0 6,2 6,75 133155 0080M 10 1,5 100 15 39 10,0 8,0 8,5 133155 01001128DIN 376DmmmaterialPitchmmL1mmD1mmCmmTapping hole ØmmDIN 376art.no.M 12 1,75 18 9 7 10,25 133160 0120M 14 2,0 20 11 9 12,0 133160 0140M 16 2,0 20 12 9 14,0 133160 0160M 18 2,5 25 14 11 15,5 133160 0180M 20 2,5 25 16 12 17,5 133160 02001128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-93


Machine tap VA-SFT<strong>Drilling</strong>• metric ISO 6H thread and ISO 6G thread• 40° helically fl uted, with spiral point• Type C, 2.5 thread chamfer• for blind-hole threads• Cutting material HSS-E V3 vaporisedISO-6H; DIN 371DmmPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.M 2 0,4 45 8 2,8 2,1 1,6 133125 0020M 2.2 0,45 45 9 2,8 2,1 1,7 133125 0022M 2,5 0,45 50 9 2,8 2,1 2,1 133125 0025M 3 0,5 56 5 3,5 2,7 2,5 133125 0030M 3.5 0,6 56 6 4,0 3,0 2,9 133125 0035M 4 0,7 63 7 4,5 3,4 3,3 133125 0040M 5 0,8 70 8 6,0 4,9 4,2 133125 0050M 6 1,0 80 10 6,0 4,9 5,0 133125 0060M 8 1,25 90 13 8,0 6,2 6,8 133125 0080M 10 1,5 100 15 10,0 8,0 8,5 133125 01001128ISO-6G; DIN 371DmmPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.M 2 0,4 45 8 2,8 2,1 1,6 133130 0020M 2,5 0,45 50 9 2,8 2,1 2,1 133130 0025M 3 0,5 56 5 3,5 2,7 2,5 133130 0030M 4 0,7 63 7 4,5 3,4 3,3 133130 0040M 5 0,8 70 8 6,0 4,9 4,2 133130 0050M 6 1,0 80 10 6,0 4,9 5,0 133130 0060M 8 1,25 90 13 8,0 6,2 6,8 133130 0080M 10 1,5 100 15 10,0 8 8,5 133130 01001128ISO-6H; DIN 376DmmPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.M 3 0,5 56 5 2,2 - 2,5 133135 0030M 4 0,7 63 7 2,8 2,1 3,3 133135 0040M 5 0,8 70 8 3,5 2,7 4,2 133135 0050M 6 1,0 80 10 4,5 3,4 5,0 133135 0060M 8 1,25 90 13 6,0 4,9 6,8 133135 0080M 10 1,5 100 15 7,0 5,5 8,5 133135 0100M 12 1,75 110 18 9,0 7 10,25 133135 0120M 14 2,0 110 20 11,0 9 12,0 133135 0140M 16 2,0 110 20 12,0 9 14,0 133135 0160M 18 2,5 125 25 14,0 11 15,5 133135 0180M 20 2,5 140 25 16,0 12,0 17,5 133135 0200M 22 2,5 140 25 18,0 14,5 19,5 133135 0220M 24 3,0 160 30 18,0 14,5 21,0 133135 0240M 27 3,0 160 30 20,0 16,0 24,0 133135 0270M 30 3,5 180 35 22,0 18,0 26,5 133135 0300M 33 3,5 180 35 25,0 20 29,5 133135 0330M 36 4,0 200 40 28,0 22 32,0 133135 03601128ISO-6G; DIN 376materialDmmPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.M 12 1,75 110 18 9 7 10,25 133140 0120M 14 2,0 110 20 11 9 12,0 133140 0140M 16 2,0 110 20 12 9 14,0 133140 01601128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-94


Machine tapup to 1400 N/mm²• metric ISO 6H thread• 40°, helically fl uted• Type C, 2-3 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E, HSS-E TiCN-coated• for blind-hole threads• possible depth of thread 2.5 x D<strong>Drilling</strong>materialDmmPitchmmLmmL1mmD1mmCmmuncoatedart.no.TiCN Coatedart.no.M 3 0,5 56 10 3,5 2,7 134230 0030 134233 0030M 4 0,7 63 12 4,5 3,4 134230 0040 134233 0040M 5 0,8 70 14 6 4,9 134230 0050 134233 0050M 6 1,0 80 16 6 4,9 134230 0060 134233 0060M 8 1,25 90 18 8 6,2 134230 0080 134233 0080M 10 1,5 100 20 10 8 134230 0100 134233 0100M 12 1,75 110 22 9 7 134230 0120 134233 0120M 16 2,0 110 28 12 9 134230 0160 134233 0160M 20 2,5 140 32 16 12 134230 02001127 1127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• metric ISO 6H thread• 40°, helically fl uted• Type C, 2-3 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E-PM• for blind-hole threads• Shortened threaded part, larger relief grindings, narrow cutting inserts• possible depth of thread 2.5 x DmaterialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 56 10 3,5 2,7 134235 0030M 4 0,7 63 12 4,5 3,4 134235 0040M 5 0,8 70 14 6 4,9 134235 0050M 6 1 80 16 6 4,9 134235 0060M 8 1,25 90 18 8 6,2 134235 0080M 10 1,5 100 20 10 8 134235 0100M 12 1,75 110 22 9 7 134235 0120M 14 2 110 25 11 9 134235 0140M 16 2 110 28 12 9 134235 0160M 20 2,5 140 32 16 12 134235 02001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetwww.atorn.deHigh quality for great performance.ATORN‘s taps:• highest cutting speeds• precision-ground for safest machining• ISO colour codes for easy identification of the correct toolAll prices in euro, VAT excludedThis is but one example of ATORN‘s high-quality drilling <strong>tools</strong>.Prices in bold print = delivery ex stock10-95


••Synchronised machine tapNEW •NUOVO •NY<strong>Drilling</strong>• Metric ISO 6HX thread• 50°, helically fluted• Type C, 2-3 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E-PM, PM powder coating TiN-coated• for blind-hole threads• possible depth of thread 2.5 x D• Minimum-sized guide piece and extremely large clearance angle• Shank tolerance = h6• for synchronised tap chuckN O U VEAU •N UEVO •materialDmmPitchmmLmmL1mmTiN-coatedart.no.M 4 0,7 63 3,5 134575 0040M 5 0,8 70 4,0 134575 0050M 6 1,0 80 5,0 134575 0060M 8 1,25 90 6,3 134575 0080M 10 1,5 100 7,5 134575 0100M 12 1,75 110 8,8 134575 0120M 14 2,0 110 10,0 134575 0140M 16 2,0 110 10,0 134575 0160M 20 2,5 140 12,5 134575 02001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetUniversal machine tapNEW •NUOVO •NY• metric ISO 6H thread• 40° helically fluted ( HSS-E ), 50° helically fluted ( HSS-E-PM )• Type C, 2 - 3 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E TiN, HSS-E PM TiAlN• for blind-hole threads• minimum thread-relief grinding• possible depth of thread 2.5 x D• Suitable for CNC machining centres using synchronised chucksN O U VEAU •N UEVO •materialDmmPitchmmLmmL1mmD1mmCmmHSS-E TiNart.no.HSS-E PM TiN Coatedart.no.M 3 0,5 56 6 3,5 2,7 135350 0030 135355 0030M 4 0,7 63 7,5 4,5 3,4 135350 0040 135355 0040M 5 0,8 70 8,5 6 4,9 135350 0050 135355 0050M 6 1,0 80 11 6 4,9 135350 0060 135355 0060M 8 1,25 90 14 8 6,2 135350 0080 135355 0080M 10 1,5 100 16 10 8 135350 0100 135355 0100M 12 1,75 110 18,5 9 7 135350 0120 135355 0120M 14 2,0 110 20 11 9 135350 0140 135355 0140M 16 2,0 110 20 12 9 135350 0160 135355 0160M 18 2,5 125 25 14 11 135350 0180M 20 2,5 140 25 16 12 135350 0200 135355 0200M 24 3,0 160 30 18 14,5 135350 02401127 1127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSafety at the workplacePlease protect your eyes, hearing and respiratory organs!Ear protectorsStartingon90-48pageSafety gogglesStartingon90-45pageBreathing protection apparatusStartingonpage90-5010-96


•Machine tapNEW •NUOVO •NY• metric ISO 6H thread• 40°, helically fl uted• Form E, 1.5–2 thread chamfer• Constructional dimensions DIN 371• Cutting material HSS-E• for blind-hole threads, possible depth of thread 2.5 x DN O U VEAU •N UEVO •<strong>Drilling</strong>materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 56 6 3,5 2,7 135400 0030M 4 0,7 63 7,5 4,5 3,4 135400 0040M 5 0,8 70 8,5 6,0 4,9 135400 0050M 6 1,0 80 11 6,0 4,9 135400 0060M 8 1,25 90 14 8,0 6,2 135400 0080M 10 1,5 100 16 10,0 8,0 135400 01001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tapping set• in plastic box• HSS-E tap for metric ISO-6H threads, right-hand• 40°, helically fl uted• Type C, 2-3 thread chamfer• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• for blind-hole threads• strong chip removal to the rear for long-chipping materials• minimum thread-relief grinding, possible depth of thread 2.5 x D• HSS/Co twist drill type GS• 130° point anglematerialContentsart.no.Tap no. 134200.... M3, M4, M5, M6, M8, M10, M12 Twist drill no. 101013.... Ø 2.5 3.3 4.2 5.0 6.8 8.5 10.2 mm 139001 00011127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine forming tap• Metric ISO 6HX thread• Type C, 2-3 thread chamfer• with oil grooves• Constructional dimensions DIN 2174• Cutting material HSS-E TiN, HSS-E TiAlN coated• For blind-hole and through-hole threads• for materials with good cold-forming properties and a min. expansion of 8 %• possible depth of thread 3 x DmaterialDmmPitchmmLmmL1mmD1mmCmmTiN-coatedart.no.TiAIN Coatedart.no.M 3 0,5 56 10 3,5 2,7 135240 0030 135245 0030M 3.5 0,6 56 12 4 3 135240 0035M 4 0,7 63 12 4,5 3,4 135240 0040 135245 0040M 5 0,8 70 14 6 4,9 135240 0050 135245 0050M 6 1 80 16 6 4,9 135240 0060 135245 0060M 8 1,25 90 18 8 6,2 135240 0080 135245 0080M 10 1,5 100 20 10 8 135240 0100 135245 0100M 12 1,75 110 24 9 7 135240 0120 135245 01201127 1127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-97


••Machine forming tap<strong>Drilling</strong>• Metric ISO 6HX thread• Type C, 2-3 thread chamfer, with oil grooves• Constructional dimensions DIN 371 = up to M10, DIN 376 = from M12• Cutting material HSS-E-PM TiCN-coated• For blind-hole and through-hole threads• For steel, hardened and tempered steels and chemically stable steels, possible depth of thread 2 x DOptimally suited forsteel and INOXmaterialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 56 10 3,5 2,7 134194 0305M 4 0,7 63 12 4,5 3,4 134194 0407M 5 0,8 70 14 6 4,9 134194 0508M 6 1,0 80 16 6 4,9 134194 0610M 8 1,25 90 18 8 6,2 134194 0812M 10 1,5 100 20 10 8 134194 1015M 12 1,75 110 22 9 7 134194 12171127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSolid carbide machine forming tapNEW •NUOVO •NY• Metric ISO 6HX thread• Type C, 2-3 thread chamfer, with oil grooves• Constructional dimensions DIN 2174, Shank tolerance h6• Cutting material solid carbide, superfine grain TiAlN coated• For blind-hole and through-hole threads, possible depth of thread 3 x D• for materials with good cold-forming properties and a min. expansion of 8 %• with internal coolant supplySuitable for seating in shrink fitholders: Shank D1 = h6N O U VEAU •N UEVO •materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,5 56 10 6 4,9 135250 0030M 4 0,7 63 12 6 4,9 135250 0040M 5 0,8 70 14 6 4,9 135250 0050M 6 1 80 16 6 4,9 135250 0060M 8 1,25 90 18 8 6,2 135250 0080M 10 1,5 100 20 10 8 135250 0100M 12 1,75 110 24 12 9 135250 01201127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine forming tapNEW •NUOVO •NY• Metric ISO 6HX thread• Type C, 2-3 thread chamfer• without oil grooves• Constructional dimensions DIN 2174• Cutting material HSS-E TiN• For blind-hole and through-hole threads, Expandable thread depth 1 x D• for materials with good cold-forming properties and min 8 %materialDmmPitchmmLmmL1mmD1mmCmm art.no.N O U VEAU •M 2 0,4 45 8,0 2,8 2,1 135405 0020M 2,5 0,45 50 9,0 2,8 2,1 135405 0025M 3 0,5 56 10,0 3,5 2,7 135405 0030M 3.5 0,6 56 12,0 4 3,0 135405 0035M 4 0,7 63 12,0 4,5 3,4 135405 0040M 5 0,8 70 14,0 6 4,9 135405 0050M 6 1,0 80 16,0 6 4,9 135405 0060M 8 1,25 90 18,0 8 6,2 135405 0080M 10 1,5 100 20,0 10 8,0 135405 01001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-98N UEVO •


•Machine forming tap V-NRT-B• Metric ISO 6HX thread• with spiral point, Form C, 2 thread chamfer• for blind-hole threads• Cutting material HSS-E Co8 TiCN-coated<strong>Drilling</strong>materialDmmPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.M 2 0,4 45 8 2,8 2,1 1,8 133320 0020M 2.2 0,45 45 9 2,8 2,1 2,0 133320 0022M 2,5 0,45 50 9 2,8 2,1 2,3 133320 0025M 3 0,5 56 11 3,5 2,7 2,8 133320 0030M 3.5 0,6 56 13 4,0 3,0 3,2 133320 0035M 4 0,7 63 13 4,5 3,4 3,7 133320 0040M 5 0,8 70 16 6,0 4,9 4,6 133320 0050M 6 1,0 80 19 6,0 4,9 5,5 133320 0060M 8 1,25 90 22 8,0 6,2 7,4 133320 0080M 10 1,5 100 24 10,0 8,0 9,3 133320 01001128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tapNEW •NUOVO •NY• metric ISO 6H fine thread• linear fl uted, with spiral point, Form B, 3.5 - 5 thread chamfer• Cutting material HSS-E, HSS-E TiN-coated• for through-hole threads• the spiral point ensures strong chip removal to the front• possible depth of thread 3 x DN O U VEAU •N UEVO •DmmPitchmmLmmL1mmD1mmCmm art.no.TiN-coatedart.no.M 3 0,35 56 7 2,2 135255 0335 135260 0305M 4 0,5 63 8 2,8 2,1 135255 0405 135260 0405M 5 0,5 70 10 3,5 2,7 135255 0505 135260 0505M 6 0,5 80 13 4,5 3,4 135255 0605 135260 0605M 6 0,75 80 13 4,5 3,4 135255 0607 135260 0607M 7 0,75 80 13 5,5 4,3 135255 0675 135260 0675M 8 0,5 80 14 6 4,9 135255 0805 135260 0805M 8 0,75 80 14 6 4,9 135255 0807 135260 0807M 8 1 90 17 6 4,9 135255 0810 135260 0810M 9 1 90 17 7 5,5 135255 0910 135260 0910M 10 0,75 90 17 7 5,5 135255 1007 135260 1007M 10 1 90 17 7 5,5 135255 1010 135260 1010M 10 1,25 100 20 7 5,5 135255 1012 135260 1012M 11 1 90 20 8 6,2 135255 1110 135260 1110M 12 1 100 20 9 7 135255 1210 135260 1210M 12 1,25 100 20 9 7 135255 1212 135260 1212M 12 1,5 100 20 9 7 135255 1215 135260 1215M 14 1 100 20 11 9 135255 1410 135260 1410M 14 1,25 100 20 11 9 135255 1412 135260 1412M 14 1,5 100 20 11 9 135255 1415 135260 1415M 15 1 100 20 12 9 135255 1510 135260 1510M 15 1,5 100 20 12 9 135255 1515 135260 1515M 16 1 100 22 12 9 135255 1610 135260 1610M 16 1,5 100 22 12 9 135255 1615 135260 16151127 1127very well suitedwell suitedmaterialDmmPitchmmLmmL1mmD1mmCmm art.no.TiN-coatedart.no.M 18 1 110 25 14 11 135255 1810 135260 1810M 18 1,5 110 25 14 11 135255 1815 135260 1815M 18 2 125 30 14 11 135255 1820 135260 1820M 20 1 125 25 16 12 135255 2010 135260 2010M 20 1,5 125 25 16 12 135255 2015 135260 2015M 20 2 140 32 16 12 135255 2020 135260 2020M 22 1 125 25 18 14,5 135255 2210 135260 2210M 22 1,5 125 25 18 14,5 135255 2215 135260 2215M 22 2 140 32 18 14,5 135255 2220 135260 2220M 24 1 140 28 18 14,5 135255 2410 135260 2410M 24 1,5 140 28 18 14,5 135255 2415 135260 2415M 24 2 140 28 18 14,5 135255 2420 135260 2420M 26 1,5 140 28 18 14,5 135255 2615 135260 2615M 27 1,5 140 28 20 16 135255 2715 135260 2715M 27 2 140 28 20 16 135255 2720 135260 2720M 30 1,5 150 28 22 18 135255 3015 135260 3015M 30 2 150 28 22 18 135255 3020 135260 3020M 32 1,5 150 28 22 18 135255 3215 135260 3215M 33 1,5 160 28 25 20 135255 3315 135260 3315M 35 1,5 170 30 28 22 135255 3515 135260 3515M 36 1,5 170 30 28 22 135255 3615 135260 3615M 38 1,5 170 30 28 22 135255 3815 135260 3815M 40 1,5 170 30 32 24 135255 4015 135260 40151127 1127steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-99


•Machine tapNEW •NUOVO •NY<strong>Drilling</strong>• metric ISO 6H fine thread• linear fl uted• Type C, 2-3 thread chamfer• Cutting material HSS-E• For blind-hole and through-hole threads• possible depth of thread 1.5 x DN O U VEAU •N UEVO •materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 3 0,35 56 4 2,2 2,1 135265 0303M 4 0,5 63 5 2,8 2,1 135265 0405M 5 0,5 70 5 3,5 2,7 135265 0505M 6 0,5 80 5 4,5 3,4 135265 0605M 6 0,75 80 8 4,5 3,4 135265 0607M 8 0,5 80 8 6 4,9 135265 0805M 8 0,75 80 8 6 4,9 135265 0807M 8 1 90 11 6 4,9 135265 0810M 9 1 90 11 7 5,5 135265 0910M 10 0,75 90 11 7 5,5 135265 1075M 10 1 90 11 7 5,5 135265 1010M 10 1,25 100 14 7 5,5 135265 1012M 12 1 100 11 9 7 135265 1210M 12 1,25 100 16 9 7 135265 1212M 12 1,5 100 16 9 7 135265 1215M 14 1 100 11 11 9 135265 1410M 14 1,25 100 15 11 9 135265 1412M 14 1,5 100 15 11 9 135265 14151127very well suitedwell suitedDmmPitchmmLmmL1mmD1mmCmm art.no.M 15 1 100 11 12 9 135265 1510M 16 1 100 11 12 9 135265 1610M 16 1,5 100 15 12 9 135265 1615M 18 1 110 12 14 11 135265 1810M 18 1,5 110 16 14 11 135265 1815M 20 1 125 12 16 12 135265 2010M 20 2 140 20 16 12 135265 2020M 22 1,5 125 16 18 14,5 135265 2215M 24 1 140 15 18 14,5 135265 2410M 24 1,5 140 16 18 14,5 135265 2415M 24 2 140 22 18 14,5 135265 2420M 26 1,5 140 20 18 14,5 135265 2615M 27 1,5 140 20 20 16 135265 2715M 27 2 140 28 20 16 135265 2720M 30 1,5 150 20 22 18 135265 3015M 30 2 150 20 22 18 135265 3020M 36 1,5 170 25 28 22 135265 36151127steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap VA-POT• metric ISO 6H fine thread• Linear fl uted, with spiral point, Form B, 4 thread chamfer• for through-hole threads• Cutting material HSS-E V3 vaporisedmaterialDmmPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.M 3 0,35 56 9 2,2 - 2,7 133505 0303M 4 0,5 63 10 2,8 2,1 3,5 133505 0405M 5 0,5 70 12 3,5 2,7 4,5 133505 0505M 6 0,5 80 14 4,5 3,4 5,5 133505 0605M 6 0,75 80 14 4,5 3,4 5,3 133505 0607M 8 0,75 80 19 6,0 4,9 7,3 133505 0807M 8 1,0 90 22 6,0 4,9 7,0 133505 0810M 10 1,0 90 20 7,0 5,5 9,0 133505 1010M 10 1,25 100 24 7,0 5,5 8,8 133505 1012M 12 1,0 100 22 9,0 7,0 11,0 133505 1210M 12 1,5 100 22 9,0 7,0 10,5 133505 1215M 14 1,5 100 22 11,0 9,0 12,5 133505 1415M 16 1,5 100 22 12,0 9,0 14,5 133505 1615M 18 1,5 110 25 14,0 11,0 16,5 133505 1815M 20 1,5 125 25 16,0 12,0 18,5 133505 2015M 22 1,5 125 25 18,0 14,5 20,5 133505 2215M 24 1,5 140 28 18,0 14,5 22,5 133505 24151128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-100


Machine tap• metric ISO 6H fine thread• 15°, RH, helically fl uted• Type C, 2-3 thread chamfer• Cutting material HSS-E, vaporised• for blind-hole threads• easy chip removal to the rear• suitable for use with multiple spindles• possible depth of thread 1.5 x D<strong>Drilling</strong>materialDmmPitchmmLmmL1mmD1mmCmm art.no.M 5 0,5 70 5 3,5 2,7 135280 0505M 6 0,75 80 8 4,5 3,4 135280 0607M 8 0,75 80 8 6,0 4,9 135280 0807M 8 1 90 11 6,0 4,9 135280 0810M 10 1 90 11 7,0 5,5 135280 1010M 10 1,25 100 14 7,0 5,5 135280 1012M 12 1 100 11 9,0 7,0 135280 1210M 12 1,25 100 16 9,0 7,0 135280 1212M 12 1,5 100 16 9,0 7,0 135280 1215M 14 1 100 11 11,0 9,0 135280 1410M 14 1,5 100 15 11,0 9,0 135280 1415M 16 1 100 11 12,0 9,0 135280 1610M 16 1,5 100 15 12,0 9,0 135280 1615M 18 1,5 110 16 14,0 11,0 135280 1815M 20 1,5 125 16 16,0 12,0 135280 2015M 22 1,5 125 16 18,0 14,5 135280 2215M 24 1,5 140 16 18,0 14,5 135280 2415M 24 2 140 22 18,0 14,5 135280 2420M 26 1,5 140 20 18,0 14,5 135280 2615M 27 1,5 140 20 20,0 16,0 135280 2715M 27 2 140 28 20,0 16,0 135280 2720M 28 1,5 140 20 20,0 16,0 135280 2815M 30 1,5 150 20 22,0 18,0 135280 3015M 30 2 150 20 22,0 18,0 135280 30201127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• metric ISO 6H fine thread• 40°, helically fl uted• Type C, 2-3 thread chamfer• Cutting material HSS-E, vaporised, HSS-E TiN-coated• for blind-hole threads• strong chip removal to the rear• minimum thread-relief grinding• possible depth of thread 3 x DmaterialDmmPitchmmLmmL1mmD1mmCmm art.no.TiN-coatedart.no.M 6 0,75 80 8 4,5 3,4 135285 0607 135290 0607M 8 1 90 11 6 4,9 135285 0810 135290 0810M 10 1 90 11 7 5,5 135285 1010 135290 1010M 10 1,25 100 14 7 5,5 135285 1012 135290 1012M 12 1,25 100 16 9 7 135285 1212 135290 1212M 12 1,5 100 16 9 7 135285 1215 135290 1215M 14 1,5 100 15 11 9 135285 1415 135290 1415M 16 1,5 100 15 12 9 135285 1615 135290 1615M 18 1,5 110 16 14 11 135285 1815 135290 1815M 20 1,5 125 16 16 12 135285 2015 135290 20151127 1127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-101


Machine tap VA-SFT<strong>Drilling</strong>• metric ISO 6H fine thread• 40° helically fl uted, with spiral point, Form C, 2.5 thread chamfer, for blind-hole threads• Cutting material HSS-E V3 vaporisedmaterialDmmPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.M 3 0,35 56 4 2,2 - 2,7 133515 0303M 4 0,5 63 6 2,8 2,1 3,5 133515 0405M 5 0,5 70 7 3,5 2,7 4,5 133515 0505M 6 0,5 80 8 4,5 3,4 5,5 133515 0605M 6 0,75 80 8 4,5 3,4 5,3 133515 0607M 8 0,75 80 10 6,0 4,9 7,3 133515 0807M 8 1,0 90 10 6,0 4,9 7,0 133515 0810M 10 1,0 90 12 7,0 5,5 9,0 133515 1010M 10 1,25 100 20 7,0 5,5 8,8 133515 1012M 12 1,0 100 16 9,0 7,0 11,0 133515 1210M 12 1,5 100 14 9,0 7,0 10,5 133515 1215M 14 1,5 100 16 11,0 9,0 12,5 133515 1415M 16 1,5 100 16 12,0 9,0 14,5 133515 1615M 18 1,5 110 12 14,0 11,0 16,5 133515 1815M 20 1,5 125 9 16,0 12,0 18,5 133515 2015M 22 1,5 125 20 18,0 14,5 20,5 133515 2215M 24 1,5 140 24 18,0 14,5 22,5 133515 24151128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• British Standard Withworth, 55°• linear fl uted, Type C, 2 - 3 thread chamfer• Cutting material HSS-E• For blind-hole and through-hole threads, possible depth of thread 3 x D• Suitable for CNC machining centres with synchronised chucks for higher quantities• Note: For cylindrical pipe threads DIN-ISO 228/1materialDmmPitchGang/ZollLmmL1mmD1mmCmm art.no.G 1/8” 28 90 11 7 5,5 135295 0018G 1/4” 19 100 14 11 9 135295 0014G 3/8” 11 100 14 12 9 135295 0038G 1/2” 16 125 18 16 12 135295 0012G 3/4” 14 140 20 20 16 135295 0034G 1” 11 160 24 25 20 135295 01001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• British Standard Withworth, 55°• linear fl uted, with spiral point, Reduced shank, form C, 2-3 thread chamfer• Cutting material HSS-E• for through-hole threads, possible depth of thread 1.5 x D• Suitable for conventional machining using quick-action drill chuck• Note: For cylindrical pipe threads DIN-ISO 228/1materialDmmPitchGang/ZollLmmL1mmD1mmCmm art.no.G 1/8” 28 90 11 7 5,5 135300 0018G 1/4” 19 100 14 11 9 135300 0014G 3/8” 11 100 14 12 9 135300 0038G 1/2” 14 125 18 16 12 135300 0012G 3/4” 14 140 20 20 16 135300 0034G 1” 11 160 24 25 20 135300 01001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-102


Machine tap• British Standard Withworth, 55°• 15°, RH, helically fl uted• Type C, 2-3 thread chamfer• Cutting material HSS-E• for blind-hole threads• easy chip removal to the rear• suitable for use with multiple spindles, possible depth of thread 3 x D• Suitable for conventional machining using quick-action drill chuck• Note: For cylindrical pipe threads DIN-ISO 228/1materialDmmPitchGang/ZollLmmL1mmD1mmCmm art.no.G 1/8” 28 90 11 7 5,5 135315 0018G 1/4” 19 100 14 11 9 135315 0014G 3/8” 19 100 14 12 9 135315 0038G 1/2” 14 125 18 16 12 135315 0012G 3/4” 14 140 20 20 16 135315 0034G 1” 11 160 24 25 20 135315 01001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset<strong>Drilling</strong>Machine tap• British Standard Withworth, 55°• 40°, helically fl uted• Type C, 2-3 thread chamfer• Cutting material HSS-E, vaporised• for blind-hole threads• strong chip removal to the rear for long-chipping materials• minimum thread-relief grinding• possible depth of thread 3 x D• Suitable for conventional machining using quick-action drill chuck• Note: For cylindrical pipe threads DIN-ISO 228/1materialDmmPitchGang/ZollLmmL1mmD1mmCmm art.no.G 1/8” 28 90 18 7 5,5 135320 0018G 1/4” 19 100 20 11 9 135320 0014G 3/8” 19 100 22 12 9 135320 0038G 1/2” 14 125 25 16 12 135320 0012G 3/4” 14 140 28 20 16 135320 0034G 1” 11 160 30 25 20 135320 01001127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap VA-SFT• British Standard Withworth, 55°, ISO 228• 40° helically fl uted, with spiral point• Type C, 2.5 thread chamfer, for blind-hole threads• Cutting material HSS-E V3 vaporisedmaterialDmmPitchmmLmmL1mmD1mmCmmTapping hole Ømm art.no.G 1/8” 28 90 11 7 5,5 8,8 133910 0001G 1/4” 19 100 16 11 9,0 11,8 133910 0002G 3/8” 19 100 16 12 9,0 15,0 133910 0003G 1/2” 14 125 22 16 12,0 19,0 133910 0004G 5/8” 14 125 22 18 14,5 21,0 133910 0005G 3/4” 14 140 22 20 16,0 24,5 133910 0006G 7/8” 14 150 22 22 18,0 28,0 133910 0007G 1” 11 160 28 25 20,0 31,0 133910 00081128very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-103


Machine tap<strong>Drilling</strong>• UNC, unified national coarse• Type B, 3.5-5 thread chamfer• Constructional dimensions DIN 371 = up to 3/8’’, DIN 376 = from 7/16’’• Cutting material HSS-E, vaporised• for through-hole threads• Suitable for conventional machining using quick-action drill chuck, possible depth of thread 3 x DmaterialDmmPitchGang/ZollLmmL1mmD1mmCmm art.no.1/4” 20 80 16 7 5,5 135325 00015/16” 18 90 18 8 6,2 135325 00023/8” 16 100 20 10 8 135325 00037/16” 14 100 22 8 6,2 135325 00041/2” 13 110 25 9 7 135325 00059/16” 12 110 30 11 9 135325 00065/8” 11 110 30 12 9 135325 00073/4” 10 125 33 14 11 135325 00081127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• UNC, unified national coarse• 40°, helically fl uted, Type C, 2-3 thread chamfer• Constructional dimensions DIN 371 = up to 3/8’’, DIN 376 = from 7/16’’• Cutting material HSS-E, vaporised• for blind-hole threads, Suitable for conventional machining using quick-action drill chuck• possible depth of thread 3 x DmaterialDmmPitchGang/ZollLmmL1mmD1mmCmm art.no.1/4” 20 80 13 7 5,5 135330 00015/16” 18 90 14 8 6,2 135330 00023/8” 16 100 16 10 8 135330 00037/16” 14 100 18 8 6,2 135330 00041/2” 13 110 20 9 7 135330 00059/16” 12 110 21 11 9 135330 00065/8” 11 110 24 12 9 135330 00073/4” 10 125 25 14 11 135330 00081127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• UNF thread, unified national fine thread• linear fl uted, with spiral point• Tolerance: 2B• Type B, 3.5-5 thread chamfer• Constructional dimensions DIN 374• Cutting material HSS-E, vaporised• for through-hole threads• Suitable for conventional machining using quick-action drill chuck, possible depth of thread 3 x DmaterialDmmPitchGang/ZollLmmL1mmD1mmCmm art.no.1/4” 28 80 16 4,5 3,4 135335 00015/16” 24 90 18 6 4,9 135335 00023/8” 24 90 18 7 5,5 135335 00037/16” 20 100 22 8 6,2 135335 00041/2” 20 100 20 9 7 135335 00059/16” 18 100 22 11 9 135335 00065/8” 18 100 22 12 9 135335 00073/4” 16 110 25 14 11 135335 00081127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-104


Machine tap• UNF thread, unified national fine thread• 40°, helically fl uted• Type C, 2-3 thread chamfer• Constructional dimensions DIN 374• Cutting material HSS-E, vaporised• for blind-hole threads• possible depth of thread 2.5 x D<strong>Drilling</strong>materialDmmPitchGang/ZollLmmL1mmD1mmCmm art.no.1/4” 28 80 16 4,5 3,4 135340 00015/16” 24 90 18 6 4,9 135340 00023/8” 24 90 18 7 5,5 135340 00037/16” 20 100 22 8 6,2 135340 00041/2” 20 100 20 9 7 135340 00055/8” 18 100 22 12 9 135340 00071127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tap• American conical pipe thread NPT-60°• linear fl uted• Type C, 2-3 thread chamfer• Cutting material HSS-E• For blind-hole and through-hole threads• conical, sealing pitch 1:16• possible depth of thread 1.5 x DmaterialDmmPitchGang/ZollLmmL1mmD1mmCmm art.no.NPT 1/16” 27 56 14 6 4,9 135345 0001NPT 1/8” 27 63 15 7 5,5 135345 0002NPT 1/4” 18 63 21 11 9 135345 0003NPT 3/8” 18 70 21 12 9 135345 0004NPT 1/2” 14 80 27 16 12 135345 0005NPT 3/4” 14 100 27 20 16 135345 0006NPT 1” 11,5 110 32 25 20 135345 00071127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetMachine tapNEW •NUOVO •NYPG• Reinforced straight pipe thread 80°• linear fl uted• Type B, 3.5-5 thread chamfer• Cutting material HSS-E• for through-hole threads• possible depth of thread 3 x D•N O U VEAU •N UEVO •materialDmmPitchGang/ZollLmmL1mmD1mmCmm art.no.PG 7 20 70 22 9 7 135380 0070PG 9 18 70 22 12 9 135380 0090PG 11 18 80 22 14 11 135380 0110PG13.5 18 80 22 16 12 135380 0135PG 16 18 80 22 18 14,5 135380 0160PG 21 16 90 22 22 18 135380 0210PG 29 16 100 25 28 22 135380 02901127very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-105


Solid carbide drill for broken-off tap<strong>Drilling</strong>• Drill bit for broken-off tap in bolt hole• for drilling stellites and heat-treated steels (58 – 68 HRc)• Straight shank with hexagon• Cutting material solid carbideDmmL1mmLmmD1mm art.no.2,5 10 38 3,0 114075 00253,3 14 46 4,0 114075 00334,2 19 50 5,0 114075 00425,0 23 50 6,0 114075 00506,8 23 60 7,0 114075 00688,5 25 80 9,0 114075 008510,2 35 80 12,0 114075 010211327-part kitmaterialvery well suitedwell suitedContentsart.no.Each 1 solid carbide reamer Ø 2.5 3.3 4.2 5.0 6.8 8.5 10.2 114075 10071132steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetwww.atorn.deHigh quality for great performance.ATORN‘s taps:• highest cutting speeds• precision-ground for safest machining• ISO colour codes for easy identification of the correct toolThis is but one example of ATORN‘s high-quality drilling <strong>tools</strong>.10-106


Thread repair kits• Contents: for each coil thread:• 1 drill• 1 coil tap• 1 hand installer• 1 stud breaker• thread inserts• Individual taps are available on request<strong>Drilling</strong>Single repair kitsfor coil threadKit compilationsTwist drill ØmmNumber of insertsM 3 x 0.5 3,2 20 137050 0003M 4 x 0.7 4,2 20 137050 0004M 5 x 0.8 5,2 20 137050 0005M 6 x 1.0 6,3 20 137050 0006M 8 x 1.25 8,3 20 137050 0008M 10 x 1.5 10,4 15 137050 0010M 12 x 1.75 12,4 10 137050 00121126for coil threadTwist drill ØNumber of insertsmmart.no.M 5 x 0.8 / M 6 x 1.0 / M 8 x 1.25 / M 10 x1.5 / M 12 x 1.755,2 / 6,3 / 8,3 / 10,4 / 12,4 25 except M 12x1.75 = 10 137055 0001M 6 x 1.0 / M 8 x 1.25 / M 10 x 1.5 6,3 / 8,3 / 10,4 25 137055 00021126Thread inserts 1.5 x D• Standard type, „passing through freely“• of stainless steel• DIN 8140, tolerance ISO 2 (6H)for coil threadart.no.art.no.M 3 x 0.5 100 137051 0003M 4 x 0.7 100 137051 0004M 5 x 0.8 100 137051 0005M 6 x 1.0 100 137051 0006M 8 x 1.25 100 137051 0008M 10 x 1.5 100 137051 0010M 12 x 1.75 100 137051 00121126ApplicationRepair of damaged or worn thread.Thread reinforcement of materials with low shear strength, for example aluminiumand magnesium alloys, in mechanical engineering, in automotive, electrical andmedical engineering, and in aviation and astronautics.11 DrillUse a twist drill to ream the damaged thread.2 CheckCheck that the taps and threaded bolts have the same thread and pitch.23 ThreadUse a special coil tap to cut the supporting thread into the drilled hole. The useof cutting fluid is recommended.34 Fit thread insertPlace the insert on the tool and ensure that the tang is seated in the grooveopening. Adjust to the correct position using the adjusting ring. Apply light pressureto rotate the thread set to the thread position. Do not turn against the direction ofmovement, or the tang may break off.5 Breaking the tangOnce fitted, take out the rotation tool and remove the tang using the tang breaker.445All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-107


Threading die<strong>Drilling</strong>• for metric ISO threads DIN 13• closed, pre-slotted shape• from M3 with two-sided spiral point for clean and easy chip removal in cutting direction• Tolerance fi eld 6g• Cutting material HSS, HSS-E (lapped, from M3 nitrifi ed)Right-handed threadDmmPitchmmD1mmHmmNart.no.HSSHSS-Eart.no.M 2 0,4 16 5 3 136005 0020M 2,5 0,45 16 5 3 136001 0025M 2.6 0,45 16 5 3 136001 0026M 3 0,5 20 5 3 136001 0030 136005 0030M 3.5 0,6 20 5 3 136001 0035M 4 0,7 20 5 3 136001 0040 136005 0040M 4.5 0,75 20 7 4 136001 0045M 5 0,8 20 7 4 136001 0050 136005 0050M 6 1,0 20 7 4 136001 0060 136005 0060M 7 1,0 25 9 4 136001 0070M 8 1,25 25 9 4 136001 0080 136005 0080M 9 1,25 25 9 4 136001 0090M 10 1,5 30 11 4 136001 0100 136005 0100M 11 1,5 30 11 4 136001 0110M 12 1,75 38 14 4 136001 0120 136005 0120M 14 2,0 38 14 4 136001 0140 136005 0140M 16 2,0 45 18 4 136001 0160 136005 0160M 18 2,5 45 18 5 136001 0180 136005 0180M 20 2,5 45 18 5 136001 0200 136005 0200M 22 2,5 55 22 5 136001 0220M 24 3,0 55 22 5 136001 0240 136005 0240M 27 3,0 65 25 5 136001 0270M 30 3,5 65 25 6 136001 0300M 33 3,5 65 25 6 136001 0330M 36 4,0 65 25 7 136001 03601126 1126Left-handed threadDmmPitchmmD1mmM 10 1,5 30 11 4 136010 0100M 12 1,75 38 14 4 136010 0120M 14 2,0 38 14 4 136010 0140M 16 2,0 45 18 5 136010 0160M 20 2,5 45 18 5 136010 0200M 3 0,5 20 5 3 136010 0030M 4 0,7 20 5 3 136010 0040M 5 0,8 20 7 3 136010 0050M 6 1,0 20 7 4 136010 0060M 8 1,25 25 9 4 136010 00801126HmmNart.no.HSS7-part kit• for metric ISO threads DIN 13• in steel plate cartridge• Cutting material HSS-EmaterialContentsHSS-Eart.no.Each 1 threading die M 3-4-5-6-8-10-12 139020 00011126very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetHSSHSS-Ematerial10-108


Threading die• for metric ISO fine threads DIN 13• closed, pre-slotted shape• from M3 with two-sided spiral point for clean and easy chip removal in cutting direction• Tolerance fi eld 6g, M2 is 6h and without spiral point• Cutting material HSS, HSS-E (lapped)• * without spiral point<strong>Drilling</strong>Right-handed threadDmmPitchmmD1mmHmmNart.no.HSSHSS-Eart.no.M 2* 0,25 16 5 4 136015 0001M 3 0,35 20 5 4 136015 0006M 4 0,35 20 5 4 136015 0008M 5 0,5 20 5 4 136015 0010 136020 0010M 6 0,5 20 5 4 136015 0011M 6 0,75 20 7 4 136015 0012 136020 0012M 7 0,75 25 9 4 136015 0013M 8 0,5 25 9 5 136015 0014M 8 0,75 25 9 4 136015 0015 136020 0015M 8 1,0 25 9 4 136015 0016M 9 1,0 25 9 5 136015 0018M 10 0,75 30 11 5 136015 0020M 10 1,0 30 11 5 136015 0021 136020 0021M 10 1,25 30 11 4 136015 0022M 11 1,0 30 11 5 136015 0023M 12 1,0 38 10 5 136015 0025 136020 0025M 12 1,25 38 10 4 136015 0026M 12 1,5 38 10 4 136015 0027 136020 0027M 14 1,0 38 10 5 136015 0031M 14 1,25 38 10 5 136015 0032M 14 1,5 38 10 5 136015 0033 136020 0033M 15 1,0 38 10 5 136015 0034M 16 1,0 45 14 5 136015 0036M 16 1,5 45 14 5 136015 0037 136020 0037M 18 1,0 45 14 5 136015 0038M 18 1,5 45 14 5 136015 0039 136020 00391126 1126DmmPitchmmD1mmHmmNart.no.HSSHSS-Eart.no.M 20 1,0 45 14 6 136015 0041M 20 1,5 45 14 6 136015 0042 136020 0042M 20 2,0 45 14 6 136015 0043M 22 1,0 55 16 6 136015 0044M 22 1,5 55 16 6 136015 0045 136020 0045M 22 2,0 55 16 5 136015 0046M 24 1,0 55 16 6 136015 0047M 24 1,5 55 16 6 136015 0048 136020 0048M 24 2,0 55 16 6 136015 0049M 25 1,5 55 16 6 136015 0051M 26 1,5 55 16 6 136015 0052M 27 2,0 65 18 6 136015 0055M 28 1,5 65 18 6 136015 0057 136020 0057M 30 1,5 65 18 6 136015 0060 136020 0060M 30 2,0 65 18 7 136015 0061M 32 1,5 65 18 7 136015 0062M 33 2,0 65 18 7 136015 0065M 34 1,5 65 18 7 136015 0066M 35 1,5 65 18 8 136015 0067M 36 1,5 65 18 8 136015 0068M 36 2,0 65 18 8 136015 0069M 36 3,0 65 25 7 136015 0070M 40 1,5 75 20 8 136015 0075M 42 1,5 75 20 8 136015 0078M 45 1,5 90 22 7 136015 0082M 50 1,5 90 22 8 136015 00881126 1126Left-handed threadDmmPitchmmD1mmHmmNart.no.M 8-LH 0,75 25 9 4 136025 0009M 8-LH 1,0 25 9 4 136025 0010M 10-LH 1,0 30 11 5 136025 0015M 12-LH 1,5 38 10 4 136025 00191126HSSDmmPitchmmD1mmHmmNart.no.M 14-LH 1,5 38 10 5 136025 0020M 16-LH 1,5 45 14 5 136025 0022M 20-LH 1,5 45 14 6 136025 00251126HSSmaterialvery well suitedwell suitedHSSHSS-Esteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-109


Threading die<strong>Drilling</strong>• for Whitworth threads BS 84 or British Standard Withworth DIN/EN/ISO 228/Part 1• closed, pre-slotted shape• from 1/8’’ with two-sided spiral point for clean and easy chip removal in cutting direction• Cutting material HSSWhitworth thread BS 84, tolerance field mediumDmmPitchGang/ZollD1mmBSW 1/8’’ 40 20 5 4 136035 0003BSW 5/32’’ 32 20 7 4 136035 0004BSW 7/32’’ 24 20 7 4 136035 0006BSW 1/4’’ 20 20 7 4 136035 0007BSW 5/16’’ 18 25 9 4 136035 0008BSW 3/8’’ 16 30 11 4 136035 0009BSW 1/2’’ 12 38 14 4 136035 0011BSW 5/8’’ 11 45 18 4 136035 00131126Whitworth pipe thread, DIN/EN/ISO 228/part 1 in tolerance field AmaterialDmmPitchGang/ZollD1mmHmmHmmNNG 1/8” 28 30 11 5 136040 0001G 1/4” 19 38 10 5 136040 0002G 3/8” 19 45 14 5 136040 0003G 1/2” 14 45 14 6 136040 0004G 3/4” 14 55 16 6 136040 0006G 1” 11 65 18 7 136040 0008G 11/2” 11 90 22 8 136040 0012G 2” 11 105 22 9 136040 00141126very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetart.no.art.no.Threading die• for UNF (unified national fine) threads• closed, pre-slotted shape• from no. 5 with two-sided spiral point for clean and easy chip removal in cutting direction• Cutting material HSS• Note: For cutting true-to-gauge threads within the 2A tolerance fi eld• * without spiral pointmaterialDmmD1mmHmmPitchGang/ZollNUNF no. 4* 16 5 48 4 136050 0005UNF no. 6 20 5 40 4 136050 0007UNF no. 8 20 7 36 4 136050 0008UNF no. 10 20 7 32 4 136050 0009UNF no. 12 20 7 28 4 136050 0010UNF 1/4” 20 7 28 4 136050 0011UNF 5/16” 25 9 24 4 136050 0012UNF 3/8” 30 11 24 4 136050 0013UNF 7/16” 30 11 20 5 136050 0014UNF 1/2” 38 10 20 5 136050 0015UNF 9/16” 38 10 18 5 136050 0016UNF 5/8” 45 14 18 5 136050 00171126very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetart.no.10-110


Thread cutting tool set• in steel plate cartridge• Contents: 1 set of hand taps DIN 352, M3-4-5-6-8-10-12, set with 3 taps each• 1 threading die DIN 223/EN 22568 each, M3-4-5-6-8-10-12• 1 adjustable tap wrench size 1 + 2 each• 1 threading die holder DIN 225 each: 20x5, 20x7, 25x9, 30x11, 38x14• 1 tapping hole drill bit Ø 2.5; 3.3; 4.2; 5.0; 6.8; 8.5; 10.2 mm each• 1 tool holder with ratchet size 1 + pitch gauge + screwdriver• Cutting material HSS<strong>Drilling</strong>materialvery well suitedwell suitedContentsart.no.M3 - M12 137020 00121126steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetThread cutting tool set• in steel plate cartridge• Contents: Each: 1 set of hand taps DIN 352, M3-4-5-6-8-10-12-14-16-18-20, set with 3 taps• 1 threading die DIN 223/EN 22568, M3-4-5-6-8-10-12-14-16-18-20• 1 adjustable tap wrench sizes 1 + 3• 1 threading die holder: 20 x 5, 20 x 7, 25 x 9, 30 x 11, 38 x 14, 45 x 18• 1 tool holder with ratchet sizes 1 + 3, pitch gauge + screwdriver• Cutting material HSSmaterialvery well suitedwell suitedContentsart.no.M3 - M20 137030 00201126steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetHand tap set• for metric threads M3-M12• with adjustable tap wrench and tool holder• in plastic box• Cutting material HSSmaterialContentsart.no.Each 1 set of hand taps DIN 352, M3-4-5-6-8-10-12, 1 tap wrench size 1 1/2, 1 tool holder size 1 139010 00011126very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-111


Single operation tapping set<strong>Drilling</strong>• for metric threads M3-M12• Single operation taps (chamfer form B with spiral point)• tapping hole twist drill• Tap wrench and tool holder• in plastic box• Cutting material HSS-EContentsEach 1 single operation tap DIN 352: M 3-4-5-6-8-10-12, 1 tap wrench DIN 1814 size 11/2 adjustable, 1 tool holder size 1, each 1 twist drill DIN 338profi le-ground: 2.5 3.3 4.2 5.0 6.8 8.5 10.2 mmmaterialvery well suitedwell suitedart.no.139030 00011126steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetExtension for hand taps• adjustable• Two-jaw chuck with square holding fi xture• No. 1 = appropriate for M3-M10• No. 2 = appropriate for M5-M12No.Lmmfor quadraticmmfor tap M for tap Ww1 200 2,7 - 3 - 3,4 - 3,8 - 4,3 - 4,9 - 5,5 M 3 - M 10 1/8”-3/8” 138001 00012 230 4,9 - 5,5 - 6,2 - 7 M 5 - M 12 3/16”-1/2” 138001 00021126art.no.Extension for hand taps• For extending taps and other <strong>tools</strong> with square end according to DIN 10• galvanizedfor quadraticmmfor tap MLmmD3mm art.no.2,1 1 - 2,6 60 6 138015 00212,4 70 6 138015 00242,7 3 80 7 138015 00273,0 3,5 90 7 138015 00303,4 4 95 8 138015 00343,8 100 9 138015 00384,3 105 10 138015 00434,9 4,5 - 8 110 11 138015 00495,5 9- 10 115 12 138015 00556,2 11 120 14 138015 00627,0 12 125 15 138015 00708,0 125 17 138015 00801126for quadraticmmfor tap MLmmD3mm art.no.9,0 13 - 16 130 19 138015 009010,0 140 21 138015 010011,0 18 150 23 138015 011012,0 20 155 25 138015 012013,0 165 27 138015 013014,0 170 29 138015 014014,5 22 - 24 175 29 138015 014516,0 27 180 30 138015 016018,0 30 200 33 138015 018020,0 33 220 33 138015 020022,0 36 220 40 138015 02201126Tool holder with ratchet• Two-jaw chuck with square holding fi xture• All-steel design, chrome-plated• especially suited for threading at points diffi cult to access• long design (0250 und 0300)long design10-112Lmmfor quadraticmmfor tap M85 2,0 - 5,0 M 3 - M 8 138010 0085250 2,0 - 5,0 M 3 - M 8 138010 0250100 4,5 - 8,0 M 5 - M 12 138010 0100300 4,5 - 8,0 M 5 - M 12 138010 03001126art.no.


Extensions for machine taps• Threading in workpieces with extremely deep internal threads or for threading directly along castwalls, edges, interfering edges of equipment etc.• The front end of the extension is designed as a collet. Tightening a knurled clamping nut clamps thecollet / the tap. The torque is transferred via the square end. The rear end of the extension complieswith DIN so that the tap extensions can be clamped in quick-change inserts just like taps or otherthread-cutting equipment.• Special dimensions available on request• for being used on CNC machines and traditional threading attachment• no cost-intensive taps with special lengths• spare parts not required• the combination of extension and standard tap is precise and easy to handle• Can be supplied upon request with shank tolerance h6 for hydraulic expansion and shrink fi t holder<strong>Drilling</strong>Standard version and design with internal coolant supplyTypeD1mmfor quadraticmmL7mmD3mmCmmD4mmL4mmLmm art.no.TE1 / TE1IK 2,8 2,1 22 6 4,9 6,1 60 130 138002 0001TE1L 2,8 2,1 22 6 4,9 6,1 70 230 138002 0002TE2 / TE2IK 3,5 2,7 23 6 4,9 7,5 60 130 138002 0003 138003 0003TE2L 3,5 2,7 23 6 4,9 7,5 70 230 138002 0004TE3 / TE3IK 4,5 3,4 23 6 4,9 8,4 60 130 138002 0005 138003 0005TE3L 4,5 3,4 23 6 4,9 8,4 70 230 138002 0006TE4 / TE4IK 6,0 4,9 26 7 5,5 12,1 60 130 138002 0007 138003 0007TE4L / TE4LIK 6,0 4,9 26 7 5,5 12,1 70 230 138002 0008TE5 / TE5IK 7,0 5,5 26 7 5,5 12,1 60 130 138002 0009 138003 0009TE5L / TE5LIK 7,0 5,5 26 7 5,5 12,1 70 230 138002 0010TE6 / TE6IK 8,0 6,2 30 8 6,2 13 60 130 138002 0011 138003 0011TE6L / TE6LIK 8,0 6,2 30 8 6,2 13 80 230 138002 0012 138003 0012TE7 / TE7IK 9,0 7,0 31 9 7,0 15 60 130 138002 0013TE7L / TE7LIK 9,0 7,0 31 9 7,0 15 80 230 138002 0014 138003 0014TE8 / TE8IK 10,0 8,0 33 10 8,0 15 60 130 138002 0015 138003 0015TE8L / TE8LIK 10,0 8,0 33 10 8,0 15 80 230 138002 0016 138003 0016TE9 / TE9IK 11,0 9,0 36 11 9,0 18 90 130 138002 0017 138003 0017TE9L / TE9LIK 11,0 9,0 36 11 9,0 18 90 230 138002 0018 138003 0018TE10 / TE10IK 12,0 9,0 36 12 9,0 18 90 130 138002 0019 138003 0019TE10L / TE10LIK 12,0 9,0 36 12 9,0 18 90 230 138002 0020 138003 0020TE11 / TE11IK 14,0 11,0 40 14 11,0 22,0 90 200 138002 0021 138003 0021TE11L / TE11LIK 14,0 11,0 40 14 11,0 22,0 90 330 138002 0022 138003 0022TE12 / TE12IK 16,0 12,0 41 16 12,0 22,0 90 200 138002 0023 138003 0023TE12L / TE12LIK 16,0 12,0 41 16 12,0 22,0 90 330 138002 0024 138003 0024TE13 / TE13IK 18,0 14,5 43 18 14,5 26,0 100 200 138002 0025 138003 0025TE13L / TE13LIK 18,0 14,5 43 18 14,5 26,0 100 330 138002 0026 138003 00261128 1128art.no.IKwww.atorn.deHigh quality for great performance.Digital slide callipers by ATORN:• high-quality materials• maximum precision• quick and reliable measuring results• waterproof and with best resilienceThis is but one example of ATORN‘s high-quality measuring <strong>tools</strong>.All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-113


Tap wrench, adjustable<strong>Drilling</strong>• Housing no. 0-5 high-purity zinc die casting ZL410• Housing no. 6 made of steel ST37, welded structure• Jaws case-hardened and phosphatised• Steel grips galvanized, one handle can be screwed off• For accommodation of hand taps DIN 352 and hand reamersDIN 206 via square endNo.for quadraticmmLmm art.no.0 2,0 - 5,0 125 138020 00011 2,0 - 6,0 180 138020 00021 1/2 2,0 - 8,0 200 138020 00032 4,0 - 9,0 280 138020 00043 4,9 - 12,0 375 138020 00054 5,5 - 16,0 480 138020 00065 7,0 - 20,0 700 138020 00076 9,0 - 25,0 960 138020 00081126Mini-tap wrench, adjustable• Hardened steel jaws• For small threads• Light and handy• For delicate and exact workDmmfor quadraticmmfor tap M for tap Ww40 max. 2.4 M 1 - M 2.6 1/16” - 3/32” 138025 00011126art.no.Threading die holder• Housing Ø 16-65 mm high-purity zinc die casting ZL410• Housing from Ø 75 mm made of steel ST37, welded structure• Clamping screws phosphated• Steel grips galvanized, from Ø 45 mm, handles can be screwed off• For holding threading dies DIN 223/EN 2256810-114DmmHmmsuitable for threading dieLmm art.no.16 5 M 1-2.6 160 138030 000120 5 M 3; 4 180 138030 000220 7 M 4.5-6 180 138030 000325 9 M 7-9 210 138030 000430 11 M 10-11 270 138030 000538 14 M 12-14 310 138030 000645 18 M 16-20 440 138030 000755 22 M 22; 24 490 138030 000855 16 M 22; 25 (fi ne) 490 138030 001265 25 M 27; 30; 33; 36 630 138030 000975 30 M 39; 42 900 138030 001090 36 M 45; 48; 52 920 138030 00111126


Deburring countersink 60°• 3 cutting edges• Cutting material HSS, HSS TiN-coatedStraight shank• DIN 334CDmmD5mmD1mmLmmart.no.HSSTiN-coatedart.no.6,3 1,6 5 45 150130 0063 150131 00638,0 2 6 50 150130 0080 150131 008010,0 2,5 6 50 150130 0100 150131 010012,5 3,2 8 56 150130 0125 150131 012516,0 4 10 63 150130 0160 150131 016020,0 5 10 67 150130 0200 150131 020025,0 6,3 10 71 150130 0250 150131 02501129 1129Morse taper shank• DIN 334DmaterialDmmD5mmShank designLmm art.no.25,0 6,3 MK 2 112 150135 025031,5 10,0 MK 2 118 150135 031540,0 12,5 MK 3 150 150135 040050,0 16,0 MK 3 160 150135 050063,0 20,0 MK 4 190 150135 06301129very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset<strong>Drilling</strong>Solid carbide deburring countersink 60°• 3 cutting edges, relief-ground radially• Shank tolerance h9• Straight shank• Cutting material solid carbide• Version: Ø 8 in solid carbide, Ø10 - Ø25 solid carbide head, shank soldered• We recommend the carbide version for machining solid steels.Smooth countersinksLong service lifematerialDmmD5mmD1mmLmm art.no.8,0 2,0 6,0 50 150133 008010,0 2,5 8,0 50 150133 010012,5 3,2 8,0 56 150133 012516,0 4,0 10,0 63 150133 016020,0 5,0 10,0 67 150133 020025,0 6,3 10,0 71 150133 02501130very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetDeburring countersink 75°• 3 cutting edges, straight shank• Form C• Cutting material HSS• Deburring countersinks also available with morse taper shank and other countersink angles on request!8,0 2,0 6 50 150140 008010,0 2,5 6 54 150140 010012,5 2,8 8 54 150140 01251129very well suitedwell suitedmaterialDmmD5mmD1mmLmm art.no.DmmD5mmD1mmLmm art.no.15,0 3,2 8 56 150140 015020,0 3,5 10 63 150140 020025,0 3,8 10 71 150140 02501129steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-115


Deburring countersink 90° ENORMplus<strong>Drilling</strong>• Cutting material HSS/Co• Application: especially for materials diffi cult to machine such as Hardox 400, Creusabro, Inconel, Nimonic,Hastelloy, Monel, titanium and titanium alloysStraight shankDmmD5mmD1mm10,4 4,0 6,0 50 4 150163 104012,4 4,0 8,0 56 5 150163 124016,5 4,5 10,0 60 5 150163 165020,5 5,0 10,0 63 5 150163 205025,0 5,5 10,0 67 5 150163 250031,0 6,0 12,0 71 5 150163 31001129LmmZart.no.Morse taper shankDmmmaterialD5mmShank designLmmZ31,0 6,0 MK 2 111 5 150164 310040,0 10,0 MK 3 140 5 150164 40001129very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetart.no.Deburring countersink 90°• With cross-hole and straight shank• Chip removal due to slant drill hole in shank direction, light spiral point• Cutting material HSS-E, HSS-E TiN-coatedDmm5-part kitfor ØmmLmmD1mmuncoatedart.no.TiN-coatedart.no.10 2 - 5 45 6 150145 0025 150146 002514 5 - 10 56 6 150145 0510 150146 051021 10 - 15 67 10 150145 1015 150146 101528 15 - 20 90 12 150145 1520 150146 152035 20 - 25 106 15 150145 2025 150146 20251129 1129ContentsHSS-Eart.no.TiN-coatedart.no.D: 10 / 14 / 21 / / 28 mm + <strong>Drilling</strong> paste 150150 0001 150151 00011129 1129long designDmmfor ØmmLmmD1mm art.no.10 2 - 5 76 6 150147 000114 5 - 10 86 6 150147 000221 10 - 15 96 10 150147 00031129extra-long designDmmmaterialfor ØmmLmmD1mm art.no.10 2 - 5 136 6 150148 000114 5 - 10 146 6 150148 000221 10 - 15 156 10 150148 00031129very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-116


Deburring countersink 90°• 3 cutting edges• Relief-ground radially• Cutting material HSS, HSS-E, HSS TiN, HSS TiAlN• For countersinking and deburring• Countersunk Ø match the respective countersunk DIN screw heads• (DIN 963, 964, 965, 966, 7991)<strong>Drilling</strong>DmmD5mmD1mmLmmL4 min.mmart.no.HSSHSS TiN-coatedart.no.HSS TiAlN-coatedart.no.HSS-Eart.no.4,3 1,3 4 40 28 150101 0043 150105 0043 150107 00435,0 1,5 4 40 28 150101 0050 150105 0050 150107 00505,3 1,5 4 40 28 150101 0053 150105 0053 150107 0053 150111 00535,8 1,5 5 45 28 150101 0058 150105 0058 150107 00586,0 1,5 5 45 28 150101 0060 150105 0060 150107 00606,3 1,5 5 45 28 150101 0063 150105 0063 150107 0063 150111 00637,0 1,8 6 50 36 150101 0070 150105 0070 150107 00707,3 1,8 6 50 36 150101 0073 150105 0073 150107 00738,0 2,0 6 50 36 150101 0080 150105 0080 150107 0080 150111 00808,3 2,0 6 50 36 150101 0083 150105 0083 150107 0083 150111 00839,4 2,2 6 50 36 150101 0094 150105 0094 150107 0094 150111 009410,0 2,5 6 50 36 150101 0100 150105 0100 150107 0100 150111 010010,4 2,5 6 50 36 150101 0104 150105 0104 150107 0104 150111 010411,5 2,8 8 56 36 150101 0115 150105 0115 150107 011512,4 2,8 8 56 36 150101 0124 150105 0124 150107 0124 150111 012413,4 2,9 8 56 36 150101 0134 150105 0134 150107 013415,0 3,2 10 60 40 150101 0150 150105 0150 150107 0150 150111 015016,5 3,2 10 60 40 150101 0165 150105 0165 150107 0165 150111 016519,0 3,5 10 63 40 150101 0190 150105 0190 150107 019020,5 3,5 10 63 40 150101 0205 150105 0205 150107 0205 150111 020523,0 3,8 10 67 40 150101 0230 150105 0230 150107 023025,0 3,8 10 67 40 150101 0250 150105 0250 150107 0250 150111 025028,0 4,0 12 71 40 150107 028030,0 4,2 10 71 40 150107 030031,0 4,2 12 71 45 150101 0310 150105 0310 150107 0310 150111 031040,0 10,0 12 75 40 150101 04001129 1129 1129 1129KitsContentsHSSHSS TiN-coatedHSS TiAlN-coatedHSS-Eart.no.art.no.art.no.art.no.Each 1 piece 6.3 / 8.3 / 10.4 / 12.4 / 16.5 /20.5 mm150110 0001 150112 0001 150114 0001 150117 0001Each 1 piece 10.4 / 16.5 / 20.5 / 25.0 mm 150110 0002 150112 0002Each 1 piece 8.0 / 10.0 / 11.5 / 15.0 mm 150110 0003 150112 00031129 1129 1129 1129extra-long shank, similar to DIN 335C• L4 = shank length• Diameters 40, 50 and 63 mm available on requestDmmD5mmD1mmL 4 = 100 mmart.no.L 4 = 150 mmart.no.L 4 = 250 mmart.no.6,3 1,5 5 150104 0063 150102 00638,3 2,0 6 150104 0083 150102 008310,4 2,5 6 150104 0104 150102 010412,4 2,8 8 150104 0124 150102 0124 150106 012415,0 3,2 10 150104 0150 150102 015016,5 3,2 10 150104 0165 150102 0165 150106 016520,5 3,5 10 150104 0205 150102 0205 150106 020525,0 3,8 10 150104 0250 150102 025031,0 4,2 12 150104 0310 150102 03101129 1129 1129Kits, extra long shank, similar to DIN 335Cmaterialvery well suitedwell suitedContentsHSS L 4 = 100 mmart.no.HSS L 4 = 150 mmart.no.Each 1 piece 6.3 / 8.3 / 10.4 / 12.4 / 16.5 / 20.5 mm 150116 0001 150113 00011129 1129steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-117


Solid carbide deburring countersink 90°<strong>Drilling</strong>• 3 cutting edges, relief-ground radially• Shank tolerance h9• Cutting material solid carbide• Version: Ø 6 mm -8.3 in solid carbide, Ø10–31solid carbide head, shank soldered• Countersunk Ø match the respective countersunkDIN screw heads• (DIN 963, 964, 965, 966, 7991)materialDmmD5mmD1mmLmm art.no.6,0 2,0 5,0 40 150165 06006,3 2,0 5,0 40 150165 06308,0 2,0 6,0 45 150165 08008,3 2,0 6,0 45 150165 083010,0 2,5 8,0 46 150165 100010,4 2,5 8,0 46 150165 104011,5 2,8 8,0 56 150165 11501130very well suitedwell suitedDmmD5mmD1mmLmm art.no.12,4 2,8 8,0 56 150165 124015,0 3,2 10,0 60 150165 150016,5 3,2 10,0 60 150165 165020,5 3,5 10,0 63 150165 205025,0 3,8 10,0 67 150165 250031,0 4,2 12,0 71 150165 31001130steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetDeburring countersink 90°• 3 cutting edges• Morse taper shank• Cutting material HSS• Chatter-free countersinking and deburringmaterialDmmD5mmShank designLmm art.no.20,5 3,5 MK 2 100 150115 020525,0 3,8 MK 2 106 150115 025028,0 4,0 MK 2 112 150115 028030,0 4,2 MK 2 112 150115 030031,0 4,2 MK 2 112 150115 031034,0 4,5 MK 2 118 150115 03401129very well suitedwell suitedDmmD5mmShank designLmm art.no.37,0 4,8 MK 2 118 150115 037040,0 10,0 MK 3 140 150115 040050,0 14,0 MK 3 150 150115 050063,0 16,0 MK 4 180 150115 163080,0 22,0 MK 4 190 150115 18001129steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetDeburring countersink 90°• with one cutting edge, large chip chamber, form A• axial-radial cone-shaped shell relief grinding• Straight shank, from Ø 15 mm with off set shank• Cutting material HSS-EmaterialDmmD5mmD1mmLmm art.no.5 1 5 50 150155 005010 1 10 60 150155 010015 2 10 65 150155 015020 2 10 73 150155 02001129very well suitedwell suitedDmmD5mmD1mmLmm art.no.25 2 10 80 150155 025030 3 12 82 150155 030040 3 12 92 150155 040050 3 12 100 150155 05001129superalloys Fe/NiCo-based aluminium copper graphitealloyssteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset10-118


Combination counterbore• Only 3 holder sizes cover a counterbore range of from 7 - 66 mm (on request up to 84 mm).• Countersink and pilot pin can be combined as desired within one holder size.• Tight tolerances of bores and shanks ensure a high degree of true running accuracy.• Countersink and pin are moved fast and securely with only one screw. An additional studsafety catch prevents that the countersinks are twisted.• The manufacture of countersinks for DIN screws as well as for the manufacture ofstepped bores or counter bores outside the standard are possible by combination• 4 cutting edges<strong>Drilling</strong>Combination counterbore holdermodelD1mmShank designCountersink areammLmmD3mmL8mmHole H7mm art.no.0 10x50 7-16,5 92 18 42 10 150005 00010 MK 1 7-16,5 111 18 42 10 150005 00020 MK 2 7-16,5 132 18 57 10 150005 00081 12x65 14-27,5 120 24 55 14 150005 00031 MK 1 14-27,5 123 24 55 14 150005 00041 MK 2 14-27,5 137 24 55 14 150005 00092 MK 2 24-66 155 34,5 75 22 150005 00052 MK 3 24-66 174 34,5 75 22 150005 00061130Counterbore model 0• Counterbore range 7-16.5 mm• Cutting edge length 19 mm• Shank Ø 10 mmDmm art.no.7,0 151010 00707,5 151010 00758,0 151010 00808,5 151010 00859,0 151010 00909,5 151010 009510,0 151010 010010,5 151010 010511,0 151010 011011,5 151010 011512,0 151010 012012,5 151010 012513,0 151010 013013,5 151010 013514,0 151010 014014,5 151010 014515,0 151010 015015,5 151010 015516,0 151010 016016,5 151010 01651130Counterbore model 1• Counterbore range 14-27.5 mm• Cutting edge length 22 mm• Shank Ø 14 mmDmm art.no.14,0 151015 014014,5 151015 014515,0 151015 015015,5 151015 015516,0 151015 016016,5 151015 016517,0 151015 017017,5 151015 017518,0 151015 018018,5 151015 018519,0 151015 019019,5 151015 019520,0 151015 020020,5 151015 020521,0 151015 021021,5 151015 021522,0 151015 022022,5 151015 022523,0 151015 023023,5 151015 023524,0 151015 024024,5 151015 024525,0 151015 025025,5 151015 025526,0 151015 026026,5 151015 026527,0 151015 027027,5 151015 02751130Counterbore model 2• Counterbore range 24-66 mm• Cutting edge length 27 mm• Shank Ø 22 mmDmm art.no.24,0 151020 024024,5 151020 024525,0 151020 025025,5 151020 025526,0 151020 026026,5 151020 026527,0 151020 027027,5 151020 027528,0 151020 028028,5 151020 028529,0 151020 029030,0 151020 030030,5 151020 030531,0 151020 031032,0 151020 032033,0 151020 033034,0 151020 034035,0 151020 035036,0 151020 036037,0 151020 037038,0 151020 038039,0 151020 039040,0 151020 040041,0 151020 041042,0 151020 042043,0 151020 043044,0 151020 044045,0 151020 045046,0 151020 046047,0 151020 047048,0 151020 048049,0 151020 049050,0 151020 050051,0 151020 051052,0 151020 052053,0 151020 053054,0 151020 054055,0 151020 055056,0 151020 056058,0 151020 058060,0 151020 060062,0 151020 062064,0 151020 064065,0 151020 065066,0 151020 06601130All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-119


<strong>Drilling</strong>Pilot pin, hardened and ground, model 0• Pilot pin, attached• Overall length 59 mm• Shank Ø 4 mmDmm art.no.4,0 151025 00404,5 151025 00455,0 151025 00505,5 151025 00556,0 151025 00606,5 151025 00657,0 151025 00707,5 151025 00758,0 151025 00808,5 151025 00859,0 151025 00909,5 151025 009510,0 151025 010010,5 151025 010511,0 151025 011011,5 151025 01151130Pilot pin, hardened and ground, model 1• Pilot pin, attached• Overall length 79 mm• Shank Ø 6 mmDmm art.no.7,0 151030 00707,5 151030 00758,0 151030 00808,5 151030 00859,0 151030 00909,5 151030 009510,0 151030 010010,5 151030 010511,0 151030 011011,5 151030 011512,0 151030 012012,5 151030 012513,0 151030 013013,5 151030 013514,0 151030 014014,5 151030 014515,0 151030 015015,5 151030 015516,0 151030 016016,5 151030 016517,0 151030 017017,5 151030 017518,0 151030 01801130Pilot pin, hardened and ground, model 2• Pilot pin, attached (*= rotating pilot pin)• Overall length 105 mm• Shank Ø 10 mmDmm art.no.11,5 151035 011512,0 151035 012012,5 151035 012513,0 151035 013013,5 151035 013514,0 151035 014014,5 151035 014515,0 151035 015016,0 151035 016017,0 151035 017018,0 151035 018019,0 151035 019020,0 151035 020021,0 151035 021022,0 151035 022023,0 151035 023024,0 151035 024025,0 151035 025026,0 151035 026027,0 151035 027028,0 151035 028029,0 151035 029030,0 151035 030033,0* 151035 033035,0* 151035 035038,0* 151035 038040,0* 151035 04001130Combination counterbore setsmodel Contents, piloted counterbore Contents, pilot pin Holderart.no.OP M4-M8 8,0 / 9,0 / 10,0 / 11,0 / 12,0 / 13,0 / 14,0 / 15,0 4,5 / 5,0 / 5,5 / 6,0 / 6,5 / 6,6 / 7,0 / 7,5 / 8,0 / 8,5 / 9,0 / 10,0 Model 0 MK2 151001 0001OP M8-M14 14,0 / 15,0 / 16,0 / 18,0 / 20,0 / 22,0 / 24,0 8,0 / 8,5 / 9,5 / 10,0 / 10,5 / 11,0 / 11,5 / 12,0 / 12,5 / 13,0 / 13,5 / 14,0 / 14,5 / 15,0 / 15,5 / 16,0 Model 1 MK2 151001 0002OP M14-M24 24,0 / 26,0 / 28,0 / 30,0 / 32,0 / 33,0 / 34,0 / 36,0 / 40,0 13,0 / 14,0 / 15,0 / 16,0 / 17,0 / 18,0 / 19,0 / 20,0 / 23,0 / 24,0 / 25,0 / 26,0 Model 2 MK3 151001 00031130very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetmaterial10-120


Counterbore• 3 cutting edges• helically fl uted• with straight shank• fast pilot pin• for counterbores according to DIN 74, sheet 2, form H,J,K,• for screws according to DIN 912, DIN 6912, DIN 6984 and DIN 84• Cutting material HSS, HSS-E<strong>Drilling</strong>with pin for through-holes, grade fineDmmD6mmfor screwsD1mmLmmHSS Fine gradeart.no.HSS-E Fine gradeart.no.6,5 3,2 M3 5,0 71 150501 0001 150506 00018,0 4,3 M4 5,0 71 150501 0003 150506 000310,0 5,3 M5 8,0 80 150501 0005 150506 000511,0 6,4 M6 8,0 80 150501 0007 150506 000715,0 8,4 M8 12,5 100 150501 0009 150506 000918,0 10,5 M10 12,5 100 150501 0011 150506 001120,0 13,0 M12 12,5 100 150501 0013 150506 00131129 1129with pin for through-holes, grade mediumDmmD6mmfor screwsD1mmLmmHSS Medium gradeart.no.HSS-E Medium gradeart.no.6,5 3,4 M3 5,0 71 150501 0002 150506 00028,0 4,5 M4 5,0 71 150501 0004 150506 000410,0 5,5 M5 8,0 80 150501 0006 150506 000611,0 6,6 M6 8,0 80 150501 0008 150506 000815,0 9,0 M8 12,5 100 150501 0010 150506 001018,0 11,0 M10 12,5 100 150501 0012 150506 001220,0 13,5 M12 12,5 100 150501 0014 150506 00141129 1129with pin for tapping holesDmmD6mmfor screwsD1mmLmmart.no.HSSHSS-Eart.no.6,5 2,5 M3 5,0 71 150505 0006 150507 00068,0 3,3 M4 5,0 71 150505 0008 150507 000810,0 4,2 M5 8,0 80 150505 0010 150507 001011,0 5,0 M6 8,0 80 150505 0011 150507 001115,0 6,8 M8 12,5 100 150505 0015 150507 001518,0 8,5 M10 12,5 100 150505 0018 150507 001820,0 10,2 M12 12,5 100 150505 0020 150507 00201129 1129Kits• Contents: 1 unit each Counterbore for screws M3-M10 = 6-partDescriptionHSSHSS-Eart.no.art.no.Through-hole, fi ne grade 150511 0002 150512 0002Through-hole, medium grade 150511 0003 150512 0003Tapping hole 150511 0001 150512 00011129 1129very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetmaterialHand-held deburring tool 90°• Right hand cuttingDmm art.no.12,4 150103 012416,5 150103 016520,5 150103 020525,0 150103 02501129All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-121


Drill hole deburring tool S-edge<strong>Drilling</strong>• Drill hole deburring on both sides in one go• Spindle stop not required• Deburring at inaccessible places, e.g. hollow parts• Economisation of a second clamping• Simple and stable construction• especially suited for series production• Suited for any machine and almost any workpiece• Very short machining times• Other dimensions and TiN-coated designs available on request• Cutting material HSSDmmD1mmLmm art.no.1,0 - 1,1 0,9 45 155001 01001,1 - 1,2 1,0 45 155001 01101,2 - 1,3 1,1 45 155001 01201,3 - 1,4 1,2 45 155001 01301,4 - 1,5 1,3 45 155001 01401,5 - 1,6 1,4 50 155001 01501,6 - 1,7 1,5 50 155001 01601,7 - 1,8 1,6 50 155001 01701,8 - 1,9 1,7 60 155001 01801,9 - 2,0 1,8 60 155001 01902,0 - 2,2 1,9 60 155001 02002,2 - 2,4 2,1 80 155001 02202,4 - 2,6 2,3 80 155001 02402,6 - 2,8 2,5 80 155001 02602,8 - 3,18 2,75 101,6 155001 02803,17 - 3,55 3,15 101,6 155001 03171131very well suitedwell suitedmaterialDmmD1mmLmm art.no.3,55 - 3,96 3,58 101,6 155001 03553,96 - 4,36 3,94 101,6 155001 03964,36 - 4,74 4,34 101,6 155001 04364,74 - 5,15 4,72 101,6 155001 04745,15 - 5,56 5,13 101,6 155001 05155,56 - 5,94 5,54 101,6 155001 05565,94 - 6,35 5,92 101,6 155001 05946,35 - 6,75 6,32 101,6 155001 06356,75 - 7,13 6,73 101,6 155001 06757,13 - 7,54 7,11 101,6 155001 07137,54 - 7,95 7,52 101,6 155001 07547,95 - 8,33 7,92 101,6 155001 07958,33 - 8,71 8,31 101,6 155001 08338,71 - 9,11 8,69 101,6 155001 08719,11 - 9,52 9,09 101,6 155001 09119,52 - 9,90 9,50 112,7 155001 09521131DmmD1mmLmm art.no.9,90 - 10,31 9,88 112,7 155001 099010,31 - 10,72 10,29 112,7 155001 103110,71 - 11,13 10,67 112,7 155001 107111,10 - 11,51 11,07 139,7 155001 111011,51 - 11,91 11,48 139,7 155001 115111,89 - 12,29 11,86 139,7 155001 118912,29 - 12,70 12,27 139,7 155001 122912,70 - 13,11 12,67 177,8 155001 127013,08 - 13,49 13,05 177,8 155001 130813,49 - 13,89 13,46 177,8 155001 134913,89 - 14,30 13,84 177,8 155001 138914,30 - 14,68 14,27 190,5 155001 143014,68 - 15,09 14,65 190,5 155001 146815,09 - 15,47 15,06 190,5 155001 150915,47 - 15,88 15,44 190,5 155001 154715,88 - 16,28 15,84 212,6 155001 15881131superalloys Fe/NiCo-based aluminium copper graphitealloyssteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetPrecision boring bar, adjustable• Nickel-plated design• Adjusting range, from 2 - 5 mm• for ISO indexable cutting inserts CCMT and CCGT• cost-effi cient alternative to spindle <strong>tools</strong>The cost-efficient alternativeto spindle <strong>tools</strong>323001 1012LmmL1mmL2mmdmmD min.mmD max.mmsuitableindexableinsertssuitableregulationscrewsuitablelock screwart.no.100 66 39 10 10 12 CC..0602.. RE1 BL 0 B1 A1 323001 1012105 62 48 12 12 15 CC..0602.. RE1 BL 1 B1 A1 323001 1215110 62 59 16 15 20 CC..0602.. RE2 BL 2 B1 A1 323001 1520120 68 72 20 20 25 CC..0602.. RE3 BL 3 B1 A1 323001 2025140 65 88 25 25 30 CC..09T3.. RE4 BL 4 B2 A2 323001 2530160 65 90 25 30 35 CC..09T3.. RE5 BL 5 B2 A2 323001 3035170 66 100 32 35 40 CC..09T3.. RE6 BL 6 B2 A2 323001 3540190 67 120 32 40 45 CC..09T3.. RE7 BL 7 B2 A2 323001 4045220 65 150 32 45 50 CC..09T3.. RE8 BL10 B2 A2 323001 45503105Spare partsKeysScrewsart.no. art.no.B1 1 703053 0080 A1 5 262551 0028B2 1 703053 0150 A2 1 320901 25027114 310610-122


Indexable-insert core and countersink drill• with internal cooling• for countersinking and boring• The diameter oft he pre/drilled hole must not be smaller than dimension A!• Bore tolerances:• Indexable insert radius 0.2 mm = +0.05 / -0.10 mm• Indexable insert radius 0.4 mm = -0.03 / -0.18 mm<strong>Drilling</strong>Single-blade boring bar with internal coolingDmmD1 h6mmAmmLmmL1mmfor indexable inserts10 12 4 85 15 CCM. 0602.. A1 B1 164003 010011 12 4 85 16 CCM. 0602.. A1 B1 164003 011012 10 4 85 20 CCM. 0602.. A1 B1 164003 012013 12 5 85 21 CCM. 0602.. A1 B1 164003 013014 12 5 85 21 CCM. 0602.. A1 B1 164003 014015 12 5 85 24 CCM. 0602.. A1 B1 164003 015016 12 5 85 28 CCM. 0602.. A1 B1 164003 016017 16 6 95 40 CCM. 09T3.. A2 B2 164003 017018 16 6 95 40 CCM. 09T3.. A2 B2 164003 018019 16 6 95 40 CCM. 09T3.. A2 B2 164003 019020 16 5 95 40 CCM. 09T3.. A2 B2 164003 020021 16 5 95 33 CCM. 09T3.. A2 B2 164003 021022 16 6 95 37 CCM. 09T3.. A2 B2 164003 022023 16 6 95 40 CCM. 09T3.. A2 B2 164003 023024 16 6 95 34 CCM. 09T3.. A2 B2 164003 024025 16 8 95 33 CCM. 09T3.. A2 B2 164003 025026 20 8 120 53 CCM. 09T3.. A2 B2 164003 026027 20 9 120 56 CCM. 09T3.. A2 B2 164003 027028 20 10 120 53 CCM. 09T3.. A2 B2 164003 028029 20 10 120 55 CCM. 09T3.. A2 B2 164003 029030 20 10 120 57 CCM. 09T3.. A2 B2 164003 030031 20 12 120 55 CCM. 09T3.. A2 B2 164003 031032 20 12 120 54 CCM. 09T3.. A2 B2 164003 032033 20 12 120 55 CCM. 09T3.. A2 B2 164003 03301132art.no.Dual-edge boring bar with internal coolingDmmD1 h6mmAmmLmmL1mmfor indexable inserts16 12 5 90 28 CCM. 0602.. A1 B1 164005 001617 16 6 94 39 CCM. 0602.. A1 B1 164005 001718 16 7 92 40 CCM. 0602.. A1 B1 164005 001819 16 8 100 41 CCM. 0602.. A1 B1 164005 001920 16 9 102 40 CCM. 0602.. A1 B1 164005 002021 16 10 105 41 CCM. 0602.. A1 B1 164005 002122 16 11 110 41 CCM. 0602.. A1 B1 164005 002223 16 12 112 40 CCM. 0602.. A1 B1 164005 002324 16 13 115 40 CCM. 0602.. A1 B1 164005 002425 16 8 120 39 CCM. 09T3.. A2 B2 164005 002526 20 9 125 53 CCM. 09T3.. A2 B2 164005 002627 20 10 128 55 CCM. 09T3.. A2 B2 164005 002728 20 11 130 55 CCM. 09T3.. A2 B2 164005 002829 20 12 132 55 CCM. 09T3.. A2 B2 164005 002930 20 13 134 51 CCM. 09T3.. A2 B2 164005 003031 20 14 135 51 CCM. 09T3.. A2 B2 164005 003132 20 15 138 53 CCM. 09T3.. A2 B2 164005 003233 20 16 140 55 CCM. 09T3.. A2 B2 164005 003334 25 16 140 60 CCM. 09T3.. A2 B2 164005 003435 25 17 141 60 CCM. 09T3.. A2 B2 164005 003536 25 18 141 62 CCM. 09T3.. A2 B2 164005 003637 25 19 141 62 CCM. 09T3.. A2 B2 164005 003738 25 20 141 62 CCM. 09T3.. A2 B2 164005 003839 25 21 141 62 CCM. 09T3.. A2 B2 164005 003940 25 22 141 62 CCM. 09T3.. A2 B2 164005 004041 25 23 141 62 CCM. 09T3.. A2 B2 164005 004142 25 24 141 62 CCM. 09T3.. A2 B2 164005 00421132All prices in euro, VAT excludedart.no.Spare partsScrewsKeysart.no. art.no.A1 262551 0025 B1 703053 0080A2 320901 2502 B2 703053 01503106 7114Prices in bold print = delivery ex stock10-123


Reverse countersinks 180°<strong>Drilling</strong>• for rotating use with stationary workpieces• for ISO indexable cutting inserts (CPMT or CCM and CCG)• with internal cooling, cylindrical shank with clamping surface (whistle notch)• Ø15 and Ø18 without internal cooling• 1. positioning: note position of the cutting edges!• 2. to move „E“ out of the centre opposed to the cutting edge.• 3. Move eccentrically through the drill hole.• 4. Move back into the centre.• 5. Countersink backward with speed „N“ and feed rate „F“.• 6. Move out of the centre by „E“ opposed to the cutting edge and retract from the drill hole.D5 max.mmD min.mmD1mmD3mmEmmD5 = Max. achievable diameterLmmL2mmL3mmL4mmfor indexableinsertsClamping screw15 8,5 20 25 3,50 105 55 42 35 CPMT05T1.. M2.2 x 6 T7 A1 B1 152501 015018 10,5 20 25 4,00 112 62 47 40 CC..0602.. M2.5 x 6 T8 A2 B2 152501 018020 13,0 20 25 3,75 117 67 52 45 CC..0602.. M2.5 x 6 T8 A2 B2 152501 020024 15,0 20 25 4,75 122 72 57 50 CC..0602.. M2.5 x 6 T8 A2 B2 152501 024026 17,0 20 25 5,00 132 82 68 60 CC..0602.. M2.5 x 6 T8 A2 B2 152501 026030 19,0 20 25 6,00 142 92 78 65 CC..0602.. M2.5 x 6 T8 A2 B2 152501 030033 21,0 20 25 6,50 152 102 83 75 CC..09T3.. M4 x 8 T15 A3 B3 152501 033036 23,0 32 40 7,00 173 113 94 85 CC..09T3.. M4 x 8 T15 A3 B3 152501 036040 25,0 32 40 8,00 183 123 103 95 CC..09T3.. M4 x 8 T15 A3 B3 152501 040043 30,0 32 40 7,00 183 123 103 95 CC..09T3.. M4 x 8 T15 A3 B3 152501 043048 33,0 32 40 8,00 223 163 143 135 CC..09T3.. M4 x 8 T15 A3 B3 152501 048053 36,0 40 / 9,00 210 140 / 110 CC..1204.. M5 x 11 T20 A3 B3 152501 053057 39,0 40 / 9,50 220 150 / 120 CC..1204.. M5 x 11 T20 A3 B3 152501 057066 45,0 50 / 11,00 245 165 / 135 CC..1204.. M5 x 11 T20 A3 B3 152501 066076Spare parts52,0 50 / 12,50 265 185 / 155 CC..1204.. M5 x 11 T20 A3 B3 152501 07601131ScrewsKeysart.no. art.no.A1 152599 0001 3,95 B1 703053 0060A2 262551 0025 B2 703053 0080A3 320901 2502 B3 703053 01503106 7114Wrenchdimensionart.no.ISO indexable cutting insertsCPMT..• Unit prices when purchased in PU (packaging units) = 10 units per size and qualityISO designation Coated HC 4635art.no.CPMT 05T102 10 331260 00323107ISOFor further ISO indexable inserts,please refer to the turning sectionwww.atorn.deHigh quality for great performance.Swivel bases by ATORN:• high-quality materials• longest service life• several different chip geometriesThis is but one example of ATORN‘s high-quality turning <strong>tools</strong>.10-124


Hand reamers• Form B for fit H7• Right-hand cutting, manufacturing tolerances according to DIN1420• Helically fl uted, long tap chamfer along 1/4 of the cutting edge length• Even number of teeth with irregular teeth pitch for chatter-free reaming of the bore• Straight shank and square end• Cutting material HSS• for reaming through-holesC<strong>Drilling</strong>materialD H7mmD1mmL1mmLmmCmmZart.no.1,5 1,5 20 41 1,12 4 160101 00152,0 2,0 25 50 1,60 4 160101 00202,5 2,5 29 58 2,00 4 160101 00253,0 3,0 31 62 2,24 6 160101 00303,5 3,5 35 71 2,80 6 160101 00354,0 4,0 38 76 3,15 6 160101 00404,5 4,5 41 81 3,55 6 160101 00455,0 5,0 44 87 4,00 6 160101 00505,5 5,5 47 93 4,50 6 160101 00556,0 6,0 47 93 4,50 6 160101 00607,0 7,0 54 107 5,60 6 160101 00708,0 8,0 58 115 6,30 6 160101 00809,0 9,0 62 124 7,10 6 160101 009010,0 10,0 66 133 8,00 6 160101 010011,0 11,0 71 142 9,00 8 160101 011012,0 12,0 76 152 10,00 8 160101 012013,0 13,0 76 152 10,00 8 160101 013014,0 14,0 81 163 11,20 8 160101 01401133very well suitedwell suitedD H7mmD1mmL1mmLmmCmmZart.no.15,0 15,0 81 163 11,20 8 160101 015016,0 16,0 87 175 12,50 8 160101 016017,0 17,0 87 175 12,50 8 160101 017018,0 18,0 93 188 14,00 8 160101 018019,0 19,0 93 188 14,00 8 160101 019020,0 20,0 100 201 16,00 10 160101 020022,0 22,0 107 215 18,00 10 160101 022024,0 24,0 115 231 20,00 10 160101 024025,0 25,0 115 231 20,00 10 160101 025026,0 26,0 115 231 20,00 10 160101 026028,0 28,0 124 247 22,40 10 160101 028030,0 30,0 124 247 22,40 10 160101 030032,0 32,0 133 265 25,00 12 160101 032034,0 34,0 142 284 28,00 12 160101 034035,0 35,0 142 284 28,00 12 160101 035036,0 36,0 142 284 28,00 12 160101 036038,0 38,0 152 305 31,50 12 160101 038040,0 40,0 152 305 31,50 12 160101 04001133superalloys Fe/NiCo-based aluminium copper graphitealloyssteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetHand reamers, adjustable• Right-hand cutting, 4 cutting edges• Straight shank and square end• Large adjusting range, fi ne adjustment with ring gauges or micrometre• Cutting material HSS• for repair work that does not require narrow fi t tolerances for intermediate sizesCmaterialmodelDmmL1mmLmmCmm art.no.Spare blade setart.no.0 8,0 - 9,0 32 111 3,8 160110 0090 160115 00901 9,0 - 10,0 32 115 4,3 160110 0100 160115 01002 10,0 - 11,0 35 120 4,9 160110 0110 160115 01103 11,0 - 12,0 35 125 4,9 160110 0120 160115 01204 12,0 - 13,5 42 130 6,2 160110 0135 160115 01355 13,5 - 15,5 50 145 7 160110 0155 160115 01556 15,5 - 18,0 60 165 8 160110 0180 160115 01807 18,0 - 21,0 65 180 9 160110 0210 160115 02108 21,0 - 24,0 70 190 11 160110 0240 160115 02409 24,0 - 27,5 75 205 12 160110 0275 160115 027510 27,5 - 31,5 80 225 14,5 160110 0315 160115 031511 31,5 - 37,0 90 240 18 160110 0370 160115 037012 37,0 - 45,0 100 285 20 160110 0450 160115 045013 45,0 - 55,0 105 320 26 160110 0550 160115 055014 55,0 - 65,0 120 350 32 160110 0670 160115 06701133 1133very well suitedsteel hardened steel stainless steel cast irontitaniumwell suitedalloysSet available onrequestsuperalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-125


Hand taper reamers<strong>Drilling</strong>• 1:50 taper for taper pins• Form A linear fl uted• Form B helically fl uted 7-8° left-handed twist• Shank version: Cylindrical with square end• For taper pins according to DIN EN 22339, DIN 258, DIN EN 28737 and DIN EN 28736• For output bores, we recommend the conical drill bit for pin holes no. 101025.... recommended• Ø 13 mm and Ø 14 mm, not DIN• * These dimensions are not included in the standardType AmaterialDmmD min.mmD max.mmLmmL1mmZType Aart.no.Type Bart.no.1,50 1,40 2,14 57 37 3 160140 0015 160145 00151,60* 1,50 2,24 57 37 4 160145 00162,00 1,90 2,86 68 48 4 160140 0020 160145 00202,50 2,40 3,36 68 48 4 160140 0025 160145 00253,00 2,90 4,06 80 58 5 160140 0030 160145 00303,50* 3,40 4,90 100 75 5 160140 0035 160145 00354,00 3,90 5,26 93 68 5 160140 0040 160145 00404,50* 4,40 6,14 115 87 5 160140 0045 160145 00455,00 4,90 6,36 100 73 5 160140 0050 160145 00505,50* 5,40 7,78 150 119 6 160140 0055 160145 00556,00 5,90 8,00 135 105 6 160140 0060 160145 00606,50* 6,40 8,78 150 119 6 160140 0065 160145 00657,00* 6,90 9,72 177 141 6 160140 0070 160145 00708,00 7,90 10,80 180 145 6 160140 0080 160145 00809,00* 8,90 12,16 205 163 6 160140 0090 160145 009010,00 9,90 13,40 215 175 6 160140 0100 160145 010012,00 11,80 16,00 255 210 8 160140 0120 160145 012013,00* 12,86 16,74 240 194 8 160140 0130 160145 013014,00* 13,86 17,74 240 194 8 160140 0140 160145 014016,00 15,80 20,40 280 230 8 160140 0160 160145 016020,00 19,80 24,80 310 250 10 160140 0200 160145 020025,00 24,70 30,70 370 300 10 160140 0250 160145 025030,00 29,70 36,10 400 320 12 160140 0300 160145 030040,00 39,70 46,50 430 340 12 160140 0400 160145 040050,00 49,70 56,90 460 360 14 160140 0500 160145 05001134 1134very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetConical quick-helix reamers• 1:50 taper for taper pins• Shank version: Cylindrical with driving pin lug according to DIN 1809• For taper pins according to DIN EN 22339, DIN 258, DIN EN 28737 and DIN EN 28736• 45° helically fl uted, left-handed twist• for through-holes,• For output bores, we recommend the conical drill bit for pin holes no. 101025.... recommended• requires extensive chip removal (the pre-drilled hole must not be excessive)• Cutting material HSS• Ø 6.5; 13; 14; 16 and Ø 20 mm, not DINmaterialDmmD min.mmD max.mmLmmL1mmD1mm2,0 1,90 2,86 86 48 3,15 2 160150 00202,5 2,40 3,36 86 48 3,15 3 160150 00253,0 2,90 4,06 100 58 4,00 3 160150 00304,0 3,90 5,26 112 68 5,00 3 160150 00405,0 4,90 6,36 122 73 6,30 3 160150 00506,0 5,90 8,00 160 105 8,00 3 160150 00606,5 6,40 8,78 187 119 8,50 3 160150 00651134very well suitedwell suitedZart.no.Dmmsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetD min.mmD max.mmLmmL1mmD1mmZart.no.8,0 7,90 10,80 207 145 10,0 3 160150 008010,0 9,90 13,40 245 175 12,5 3 160150 010012,0 11,80 16,00 290 210 16,0 3 160150 012013,0 12,86 17,74 275 194 16,0 3 160150 013014,0 13,86 17,74 275 194 17,0 3 160150 014016,0 15,84 21,12 355 264 20,0 3 160150 016020,0 19,80 25,20 370 270 24,0 3 160150 0200113410-126


Ship-plate reamers• Right hand cutting• Cutting edge lengths 1/3 conical, 2/3 cylindrical• Shank version: MT• 25° helically fl uted, left-handed twist• Cutting material HSS• Used for reaming bores that are too small or off set<strong>Drilling</strong>Used for reaming bores thatare too small or offsetmaterialD1mmD3mmLmmL1mmL2mmShankdesignZart.no.6,4 4.5 151 75 19 MK 1 3 160130 00647,4 5.2 156 80 22 MK 1 3 160130 00748,0 5.5 161 85 25 MK 1 3 160130 00808,4 5.9 161 85 25 MK 1 3 160130 00849,0 6.3 166 90 27 MK 1 4 160130 00909,5 6.6 166 90 27 MK 1 4 160130 009510,0 7 171 95 30 MK 1 4 160130 010011,0 7.7 176 100 33 MK 1 4 160130 011012,0 8.4 199 105 39 MK 2 5 160130 012013,0 9.1 199 105 39 MK 2 5 160130 013014,0 9.8 209 115 42 MK 2 5 160130 014015,0 10.5 219 125 45 MK 2 5 160130 015016,0 11.2 229 135 48 MK 2 5 160130 016017,0 11.9 251 135 51 MK 3 5 160130 017018,0 12.6 261 145 58 MK 3 5 160130 018019,0 13.3 261 145 58 MK 3 5 160130 019020,0 14 271 155 62 MK 3 5 160130 02001134very well suitedwell suitedD1mmD3mmLmmL1mmL2mmShankdesignZart.no.21,0 14.7 271 155 62 MK 3 5 160130 021022,0 15.4 281 165 66 MK 3 5 160130 022023,0 16.4 281 165 66 MK 3 5 160130 023024,0 16.8 296 180 72 MK 3 5 160130 024025,0 17.5 296 180 72 MK 3 5 160130 025026,0 18.2 296 195 72 MK 3 5 160130 026027,0 18.9 311 195 78 MK 3 5 160130 027028,0 19.6 311 195 78 MK 3 5 160130 028029,0 20.3 311 195 78 MK 3 5 160130 029030,0 21 311 210 78 MK 3 5 160130 030031,0 21.7 326 210 84 MK 3 5 160130 031032,0 22.4 354 210 84 MK 4 5 160130 032033,0 23.1 354 210 84 MK 4 5 160130 033034,0 23.8 364 220 88 MK 4 5 160130 034035,0 24.5 364 220 88 MK 4 5 160130 035036,0 25.2 364 220 88 MK 4 5 160130 036037,0 25.9 364 220 88 MK 4 5 160130 03701134steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSafety at the workplacePlease protect your eyes, hearing and respiratory organs!Ear protectorsSafety gogglesatBreathing protection apparStartingon90-48pageStartingon90-45pageStartingonpage90-50usAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-127


Machine reamers<strong>Drilling</strong>• Form B, helically fluted with continuous shank up to Ø 2.9 mm• Form D, helically fluted with offset shank up to Ø 3.0 mm• for fit H7• Right-hand cutting, straight shank, Manufacturing tolerances according to DIN 1420• Chip-space ground design• Cutting material HSS-E• For reaming through-holes, from 3.8 mm, also adequate for blind boresStandard design• available on request: Ø 0.65 mm to Ø 12.05 mm, increasing by 0.01 mmD H7mmL1mmLmmD1mmZStandardart.no.6,3 28 101 6,3 6 161001 00636,4 28 101 6,3 6 161001 00646,5 28 101 6,3 6 161001 00656,6 28 101 6,3 6 161001 00666,7 28 101 6,3 6 161001 00676,8 31 109 7,1 6 161001 00686,9 31 109 7,1 6 161001 00697,0 31 109 7,1 6 161001 00707,1 31 109 7,1 6 161001 00717,2 31 109 7,1 6 161001 00727,3 31 109 7,1 6 161001 00737,4 31 109 7,1 6 161001 00747,5 31 109 7,1 6 161001 00757,6 33 117 8,0 6 161001 00767,7 33 117 8,0 6 161001 00777,8 33 117 8,0 6 161001 00787,9 33 117 8,0 6 161001 00798,0 33 117 8,0 6 161001 00808,1 33 117 8,0 6 161001 00818,2 33 117 8,0 6 161001 00828,3 33 117 8,0 6 161001 00838,4 33 117 8,0 6 161001 00848,5 33 117 8,0 6 161001 00858,6 36 125 9,0 6 161001 00868,7 36 125 9,0 6 161001 00878,8 36 125 9,0 6 161001 00888,9 36 125 9,0 6 161001 00899,0 36 125 9,0 6 161001 00909,1 36 125 9,0 6 161001 00919,2 36 125 9,0 6 161001 00929,3 36 125 9,0 6 161001 00939,4 36 125 9,0 6 161001 00949,5 36 125 9,0 6 161001 00959,6 38 133 10,0 6 161001 00969,7 38 133 10,0 6 161001 00979,8 38 133 10,0 6 161001 00989,9 38 133 10,0 6 161001 009910,0 38 133 10,0 6 161001 010011,0 41 142 10,0 6 161001 011012,0 44 151 10,0 6 161001 012013,0 44 151 10,0 8 161001 013014,0 47 160 12,5 8 161001 014015,0 50 162 12,5 8 161001 015016,0 52 170 12,5 8 161001 016017,0 54 175 14,0 8 161001 017018,0 56 182 14,0 8 161001 018019,0 58 189 16,0 8 161001 019020,0 60 195 16,0 8 161001 02001134long design, company standardD1Zextra-longD H7L1LD1Zlongmmart.no.mmmmmmmmart.no.2 14 65 2 6 161002 00203 14 90 3 6 161002 00304 16 105 4 6 161002 00405 16 115 5 6 161002 00506 16 130 6 6 161002 00608 18 160 8 6 161002 008010 20 190 10 6 161002 010012 20 210 12 6 161002 012011351135steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitealloys1,5 8 40 1,5 3 161001 00151,6 9 43 1,6 3 161001 00161,7 9 43 1,7 4 161001 00171,8 10 46 1,8 4 161001 00181,9 10 46 1,9 4 161001 00192,0 11 49 2,0 4 161001 00202,1 11 49 2,1 4 161001 00212,2 12 53 2,2 4 161001 00222,3 12 53 2,3 4 161001 00232,4 14 57 2,4 4 161001 00242,5 14 57 2,5 4 161001 00252,6 14 57 2,6 4 161001 00262,7 15 61 2,7 4 161001 00272,8 15 61 2,8 4 161001 00282,9 15 61 2,9 6 161001 00293,0 15 61 3,0 6 161001 00303,1 16 65 3,1 6 161001 00313,2 16 65 3,2 6 161001 00323,3 16 65 3,1 6 161001 00333,4 18 70 3,4 6 161001 00343,5 18 70 3,5 6 161001 00353,6 18 70 3,6 6 161001 00363,7 18 70 3,7 6 161001 00373,8 19 75 4,0 6 161001 00383,9 19 75 4,0 6 161001 00394,0 19 75 4,0 6 161001 00404,1 19 75 4,0 6 161001 00414,2 19 75 4,0 6 161001 00424,3 21 80 4,5 6 161001 00434,4 21 80 4,5 6 161001 00444,5 21 80 4,5 6 161001 00454,6 21 80 4,5 6 161001 00464,7 21 80 4,5 6 161001 00474,8 23 86 5,0 6 161001 00484,9 23 86 5,0 6 161001 00495,0 23 86 5,0 6 161001 00505,1 23 86 5,0 6 161001 00515,2 23 86 5,0 6 161001 00525,3 23 86 5,0 6 161001 00535,4 26 93 5,6 6 161001 00545,5 26 93 5,6 6 161001 00555,6 26 93 5,6 6 161001 00565,7 26 93 5,6 6 161001 00575,8 26 93 5,6 6 161001 00585,9 26 93 5,6 6 161001 00596,0 26 93 5,6 6 161001 00606,1 28 101 6,3 6 161001 00616,2 28 101 6,3 6 161001 00621134overlong design, company standardmaterialD H7mmL1mmLmm2 20 80 2 6 161003 00203 30 120 3 6 161003 00304 30 160 4 6 161003 00405 30 200 5 6 161003 00506 35 250 6 6 161003 00608 35 250 8 6 161003 008010 35 250 10 6 161003 0100very well suitedwell suitedD H7mm< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetL1mmLmmD1mmZStandardart.no.10-128


Machine reamer sets• Right hand cutting• for fit H7• Left-handed twist 7-8°• Straight shank• in plastic cartridge• Cutting material HSS-E, HSS-E TiN-coated<strong>Drilling</strong>materialDescriptionTiNart.no.art.no.Set, consisting of 1 reamer each Ø 3 / 4 / 5 / 6 / 8 / 10 / 12 mm 161001 1007 161002 10071134 1134very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetNC hundredth machine reamer sets• right-hand cutting, left-handed twist 7-8°, ground chip space• Straight shank• Manufacturing tolerances: Nominal dimensions = 0/+0.003 mm• Form B to Ø 2.03 mm with end-to-end shank and centring point on both sides• Form D from Ø 2.98 mm with off set shank• in plastic cartridge• Cutting material HSS-EContents per set Number of reamersart.no.Ø 3.00 / 4.00 / 5.00 / 6.00 / 8.00 / 10.00 / 12.00 mm 7 161035 0001Ø 2.98 / 3.00 / 3.01 / 3.02 / 3.98 / 4.00 / 4.01 / 4.02 /4.98 / 5.00 / 5.01 / 5.02 / 5.98 / 6.00 / 6.01 / 6.02 /24 161035 00027.98 / 8.00 / 8.01 / 8.02 / 9.98 / 10.00 / 10.01 / 10.02 mmØ 0.98 / 0.99 / 1.00 / 1.01 / 1.02 / 1.98 / 1.99 / 2.00 /2.01 / 2.02 / 2.98 / 3.00 / 3.01 / 3.02 / 3.98 / 3.99 /25 161035 00034.00 / 4.01 / 4.02 / 4.98 / 4.99 / 5.00 / 5.01 / 5.02 mmØ 5.98 / 5.99 / 6.00 / 6.01 / 6.02 / 6.98 / 6.99 / 7.00 /7.01 / 7.02 / 7.98 / 7.99 / 8.00 / 8.01/ 8.02 / 8.98 /8.99 / 9.00 / 9.01 / 9.02 / 9.98 / 9.99 / 10.00 / 10.01 / 10.02 mm25 161035 00041134very well suitedsteel hardened steel stainless steel cast irontitanium Super-Leg. Fe aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit. austenitic duplex GG GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GFKmaterialSafety at the workplacePlease protect your eyes, hearing and respiratory organs!Ear protectorsSafety gogglesatBreathing protection apparStartingon90-48pageStartingon90-45pageStartingonpage90-50usAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-129


NC machine reamers<strong>Drilling</strong>• for fit H7• Right hand cutting• Straight shank without square end• Type D: helically fl uted with off set shank• For utmost true running accuracy for use in hydraulic expansion chucksand high-precision chucks, these reamers are delivered with straight shank diameters• Cutting material HSS-E• for reaming through-holes• also suited for blind boresmaterialD H7mmD1 h6mmLmmL1mmL4mmZ3,0 3 61 15 20 6 161010 00303,5 4 70 18 27 6 161010 00354,0 4 75 19 32 6 161010 00404,5 5 80 21 33 6 161010 00455,0 5 86 23 34 6 161010 00505,5 6 93 26 36 6 161010 00556,0 6 93 26 36 6 161010 00606,5 6, 101 28 38 6 161010 00657,0 8 109 31 40 6 161010 00708,0 8 117 33 42 6 161010 00809,0 10 125 36 44 6 161010 009010,0 10 133 38 46 6 161010 010011,0 10 142 41 46 6 161010 011012,0 10 151 44 46 6 161010 012014,0 14 160 47 50 8 161010 014015,0 14 162 50 50 8 161010 015016,0 14 170 52 50 8 161010 016018,0 14 182 56 52 8 161010 018020,0 16 195 60 58 8 161010 02001134very well suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphitewell suited< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetart.no.Machine quick-helix reamers• for fit H7• Right hand cutting• 45° left-handed twist , form E• Straight shank• with tapered chamfer along approx 1/6 of the cutting edge length• for through-holes• odd number of teeth, clean, chatter-free surface• Broad chip spaces for high cutting speeds and up to 100 % higher feed rates• Cutting material HSS-E• for reaming through-holesmaterialD H7mmD1 h6mmLmmL1mmL4mmZart.no.2,0 2,0 49 11 - 3 161015 00202,5 2,5 57 14 - 3 161015 00253,0 3,0 61 15 20 3 161015 00303,2 3,2 65 16 24 3 161015 00323,5 3,5 70 18 27 3 161015 00354,0 4,0 75 19 32 3 161015 00404,5 4,5 80 21 33 3 161015 00455,0 5,0 86 23 34 3 161015 00506,0 5,6 93 26 36 3 161015 00607,0 7,1 109 31 40 3 161015 00708,0 8,0 117 33 42 3 161015 00809,0 9,0 125 36 44 3 161015 00901135very well suitedwell suited10-130D H7mmD1 h6mmLmmL1mmL4mmZart.no.10,0 10,0 133 38 46 3 161015 010011,0 10,0 142 41 46 3 161015 011012,0 10,0 151 44 46 4 161015 012013,0 10,0 151 44 46 4 161015 013014,0 12,5 160 47 50 4 161015 014015,0 12,5 162 50 50 4 161015 015016,0 12,5 170 52 50 4 161015 016017,0 14,0 175 54 52 4 161015 017018,0 14,0 182 56 52 4 161015 018019,0 16,0 189 58 58 4 161015 019020,0 16,0 195 60 58 4 161015 02001135steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermoset


Machine reamers• Form B for fit H7• Right hand cutting• Morse taper• helically fl uted, short 45° tap chamfer• Even number of teeth with irregular teeth pitch for chatter-free reaming of the bore• Cutting material HSS-E• For reaming through-holes, chip transport in cutting direction, short tap chamferpermit use for blind bores<strong>Drilling</strong>Standard design, DIN 208 Left-handed twist 7°D H7mmL1mmLmmShank design Z Standardart.no.3,0 15 112 MK 1 6 161005 00305,0 23 133 MK 1 6 161005 00506,0 26 138 MK 1 6 161005 00607,0 31 150 MK 1 6 161005 00708,0 33 156 MK 1 6 161005 00809,0 36 162 MK 1 6 161005 009010,0 38 168 MK 1 6 161005 010011,0 41 175 MK 1 6 161005 011012,0 44 182 MK 1 6 161005 012013,0 44 182 MK 1 8 161005 013014,0 47 189 MK 1 8 161005 014015,0 50 204 MK 2 8 161005 015016,0 52 210 MK 2 8 161005 016017,0 54 214 MK 2 8 161005 017018,0 56 219 MK 2 8 161005 018019,0 58 223 MK 2 8 161005 019020,0 60 228 MK 2 8 161005 0200long 21,0 design, company 62 standard232same pitch, 10° left-handed twistMK 2 8 161005 02101134materialD H7mmL1mmLmmShank design Z longart.no.14,0 22 245 MK 1 8 161006 014015,0 22 260 MK 2 8 161006 015016,0 25 260 MK 2 8 161006 016018,0 25 260 MK 2 8 161006 018020,0 28 270 MK 2 8 161006 020022,0 28 280 MK 2 8 161006 022024,0 32 300 MK 3 8 161006 024026,0 32 330 MK 3 10 161006 026028,0 32 340 MK 3 10 161006 028030,0 36 350 MK 3 10 161006 03001135very well suitedwell suitedD H7mmL1mmLmmShank design Z Standardart.no.22,0 64 237 MK 2 8 161005 022023,0 66 241 MK 2 8 161005 023024,0 68 268 MK 3 10 161005 024025,0 68 268 MK 3 10 161005 025026,0 70 273 MK 3 10 161005 026028,0 71 277 MK 3 10 161005 028030,0 73 281 MK 3 10 161005 030032,0 77 317 MK 4 12 161005 032034,0 78 321 MK 4 12 161005 034035,0 78 321 MK 4 12 161005 035036,0 79 325 MK 4 12 161005 036038,0 81 329 MK 4 14 161005 038040,0 81 329 MK 4 14 161005 040042,0 82 333 MK 4 14 161005 042044,0 83 336 MK 4 14 161005 044045,0 83 336 MK 4 14 161005 045046,0 84 340 MK 4 14 161005 0460overlong 50,0 design, 86 company 344 standard MK 4same pitch, 10° left-handed twist14 161005 05001134D H7mmL1mmLmmShank design Z extra-longart.no.12,0 40 315 MK 1 6 161007 012014,0 40 315 MK 1 8 161007 014016,0 45 350 MK 2 8 161007 016018,0 45 350 MK 2 8 161007 018020,0 45 350 MK 2 8 161007 020022,0 45 350 MK 2 8 161007 022024,0 70 450 MK 3 8 161007 024026,0 70 450 MK 3 10 161007 026028,0 70 450 MK 3 10 161007 028030,0 70 450 MK 3 10 161007 03001135superalloys Fe/NiCo-based aluminium copper graphitealloyssteel hardened steel stainless steel cast irontitanium< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSolid carbide machine reamers• similar to DIN 212/8093 for fit H7• Straight shank, from Ø 7.0 mm steel shank with inner centring according to DIN 332 Type B• Left-hand flute, form B, 45° chamfer, up to Ø 2.8 mm with external line-up clamp, from Ø 3.0 mm with inner centring• Cutting material solid carbide K10• for reaming cast iron, white iron, malleable cast iron, cast steel, steel, non-ferrous metal and plastics• for through-holesD H7mmD1 h9mmLmmL1mmL4mmZart.no.1,5 1,5 40 8 17 3 163001 00152,0 2,0 49 11 20 4 163001 00202,5 2,5 57 14 22 4 163001 00253,0 3,0 61 15 25 6 163001 00303,5 3,5 70 18 25 6 163001 00354,0 4,0 75 19 32 6 163001 00404,5 4,5 80 21 33 6 163001 00451136D H7mmD1 h9mmLmmL1mmL4mmZart.no.5,0 5,0 86 23 34 6 163001 00506,0 5,6 93 26 36 6 163001 00607,0 7,1 109 31 40 6 163001 00708,0 8,0 117 33 42 6 163001 008010,0 10,0 133 38 46 6 163001 010012,0 10,0 151 44 46 6 163001 01201136materialvery well suitedwell suitedsteel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetAll prices in euro, VAT excludedPrices in bold print = delivery ex stock10-131


Solid carbide NC machine reamers<strong>Drilling</strong>• for fit H7• NC shank for accommodation in hydraulic expansion chucks andhigh-precision collet chucks• tight tolerance h6 of the tool shanks for high true running accuracy• Type D• Straight shank, helically fl uted, right-hand cutting• Cutting material up to Ø 8 mm solid carbide K10, > Ø 8 mmsteel shank with solid carbide head• for reaming through-holes• also suited for blind boresmaterialD H7mmD1 h6mmLmmL1mmZart.no.1,0 1 34 6 3 163005 00101,2 1 34 6 3 163005 00121,4 2 40 8 3 163005 00141,5 2 40 8 3 163005 00151,6 2 43 9 3 163005 00161,8 2 46 10 4 163005 00182,0 2 49 11 4 163005 00202,2 3 53 12 4 163005 00222,5 3 57 14 4 163005 00252,8 3 51 15 4 163005 00283,0 3 61 15 6 163005 00303,2 4 70 18 6 163005 00323,5 4 70 18 6 163005 00354,0 4 75 19 6 163005 00404,5 5 80 21 6 163005 00455,0 5 86 23 6 163005 00505,5 6 93 26 6 163005 00551136very well suitedwell suitedD H7mmD1 h6mmLmmL1mmZart.no.6,0 6 93 26 6 163005 00606,5 6 101 28 6 163005 00657,0 8 109 31 6 163005 00708,0 8 117 33 6 163005 00809,0 10 125 36 6 163005 009010,0 10 133 38 6 163005 010011,0 10 142 41 6 163005 011012,0 10 151 44 6 163005 012013,0 10 151 44 6 163005 013014,0 14 160 47 8 163005 014015,0 14 162 50 8 163005 015016,0 14 170 52 8 163005 016017,0 14 175 54 8 163005 017018,0 14 182 56 8 163005 018019,0 16 189 58 8 163005 019020,0 16 195 60 8 163005 02001136steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetSolid carbide machine reamers• Form B, form D from Ø 3.76 mm• 10° left-handed twist, right-hand cutting, straight shank• 1/100 pitchtolerances:• Ø 0.70 to 3.00 mm +0/+ 0.003• Ø 3.01 to 6.00 mm +0/+ 0.004• Ø 6.01 to 13.05 mm +0/+ 0.005• Cutting material solid carbide K15F (Ø > 7.55 with carbide head)• for through-holes,Specify nominal dimension D in mm, four digits• e.g. 0.72 mm = 0072,5.14 = 0514,11.00 mm = 1100materialDmmvery well suitedwell suitedLmmL1mmD1mm0.60 – 0.69 33 7 = D 40.70 – 0.79 33 7 = D 40.80 – 0.94 33 7 = D 40.95 – 1.05 33 7 = D 41.06 – 1.44 40 10 = D 41.45 – 1.55 43 10 = D 41.56 – 1.94 50 11 = D 41.95 – 2.05 50 11 = D 42.06 – 2.36 50 11 = D 42.37 – 2.94 57 15 = D 42.95 – 3.05 57 15 = D 63.06 – 3.35 57 15 = D 63.36 – 3.75 57 15 = D 63.76 – 4.25 75 19 4,0 64.26 – 4.75 75 21 4,5 64.76 – 5.30 86 23 5,0 6Z 163002....Dmm11361136steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetLmmL1mmD1mm5.31 – 5.80 93 26 5,5 65.81 – 5.94 101 28 6,0 65.95 – 6.05 101 28 6,0 66.06 – 6.70 101 28 6,0 66.71 – 7.55 109 31 7,0 67.56 – 7.94 117 33 8,0 67.95 – 8.05 117 33 8,0 68.06 – 8.55 117 33 8,0 68.56 – 9.55 125 36 9,0 69.56 – 9.94 133 38 10 69.95 – 10.05 133 38 10 610.06 – 11.05 133 38 10 611.06 – 11.30 151 44 10 611.31 – 11.94 151 44 12 611.95 – 12.05 151 44 12 612.06 – 13.05 151 44 12 6Z 163002....10-132


Solid carbide high-speed machine reamers• Right-hand cutting, with internal cooling• Suitable for HPC machining• TiAlN ultra-coated• NC shank for direct accommodation in hydraulic expansion chucks and high-precision collet chucks• Adapter or special holding fi xtures unnecessary• tight tolerance h6 of the tool shanks for high true running accuracy• Version with linear fl utes, coolant exits on the face side, for blind holes• Design with 7° left-hand fl ute, lateral coolant exit, for through-holes• Manufacturing tolerances: H7 in accordance with DIN 1420• Uncoated versions available on request<strong>Drilling</strong>DmmD1 h6mmLmmL1mmZFor clearanceart.no.For blind holeart.no.3,97 6 75 12 6 163502 0397 163506 03973,98 6 75 12 6 163502 0398 163506 03983,99 6 75 12 6 163502 0399 163506 03994,00 6 75 12 6 163502 0400 163506 04004,01 6 75 12 6 163502 0401 163506 04014,02 6 75 12 6 163502 0402 163506 04024,03 6 75 12 6 163502 0403 163506 04034,50 6 75 12 6 163502 0450 163506 04504,97 6 75 12 6 163502 0497 163506 04974,98 6 75 12 6 163502 0498 163506 04984,99 6 75 12 6 163502 0499 163506 04995,00 6 75 12 6 163502 0500 163506 05005,01 6 75 12 6 163502 0501 163506 05015,02 6 75 12 6 163502 0502 163506 05025,03 6 75 12 6 163502 0503 163506 05035,50 6 75 12 6 163502 0550 163506 05505,97 6 75 12 6 163502 0597 163506 05975,98 6 75 12 6 163502 0598 163506 05985,99 6 75 12 6 163502 0599 163506 05996,00 6 75 12 6 163502 0600 163506 06006,01 6 75 12 6 163502 0601 163506 06016,02 6 75 12 6 163502 0602 163506 06026,03 6 75 12 6 163502 0603 163506 06036,50 8 100 16 6 163502 0650 163506 06507,00 8 100 16 6 163502 0700 163506 07007,50 8 100 16 6 163502 0750 163506 07507,97 8 100 16 6 163502 0797 163506 07977,98 8 100 16 6 163502 0798 163506 07987,99 8 100 16 6 163502 0799 163506 07998,00 8 100 16 6 163502 0800 163506 08008,01 8 100 16 6 163502 0801 163506 08011136 1136very well suitedwell suitedmaterialDmmD1 h6mmLmmL1mmZFor clearanceart.no.For blind holeart.no.8,02 8 100 16 6 163502 0802 163506 08028,03 8 100 16 6 163502 0803 163506 08038,50 10 120 20 6 163502 0850 163506 08509,00 10 120 20 6 163502 0900 163506 09009,50 10 120 20 6 163502 0950 163506 09509,97 10 120 20 6 163502 0997 163506 09979,98 10 120 20 6 163502 0998 163506 09989,99 10 120 20 6 163502 0999 163506 099910,00 10 120 20 6 163502 1000 163506 100010,01 10 120 20 6 163502 1001 163506 100110,02 10 120 20 6 163502 1002 163506 100210,03 10 120 20 6 163502 1003 163506 100310,50 12 120 20 6 163502 1050 163506 105011,00 12 120 20 6 163502 1100 163506 110011,50 12 120 20 6 163502 1150 163506 115011,97 12 120 20 6 163502 1197 163506 119711,98 12 120 20 6 163502 1198 163506 119811,99 12 120 20 6 163502 1199 163506 119912,00 12 120 20 6 163502 1200 163506 120012,01 12 120 20 6 163502 1201 163506 120112,02 12 120 20 6 163502 1202 163506 120212,03 12 120 20 6 163502 1203 163506 120313,00 14 130 22 6 163502 1300 163506 130014,00 14 130 22 6 163502 1400 163506 140015,00 16 150 25 6 163502 1500 163506 150016,00 16 150 25 6 163502 1600 163506 160017,00 18 150 25 6 163502 1700 163506 170018,00 18 150 25 6 163502 1800 163506 180019,00 20 150 25 6 163502 1900 163506 190020,00 20 150 25 6 163502 2000 163506 20001136 1136steel hardened steel stainless steel cast irontitanium superalloys Fe/NiCo-based aluminium copper graphite< 700 N/mm² < 1000 N/mm² < 1400 N/mm² < 55 HRc < 60 HRc ≥ 60 HRc ferrit./martens. austenitic duplex GG/GTS GGG alloys < 30 HRc ≥ 30 HRc < 8 % Si ≥ 8 % Si Cu-alloy GRP/CFP/thermosetwww.atorn.deHigh quality for great performance.Solid carbide high-performance twist drills by ATORN:• solid carbide Ultra-finest grit• longest service life• innovative centring geometry• internal coolant flew• precision-ground for safest machiningThis is but one example of ATORN‘s high-quality drilling <strong>tools</strong>.All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-133


MHD Modular tool system<strong>Drilling</strong> Bohren• Modular tool system for line boring, milling, drilling, thread cutting• Rigid high-precision system, developed and manufactured with state-of-the-art design engineering andproduction resources based on decades of experience• A system of extreme flexibility and simplicity for machine <strong>tools</strong>, machiningcentres and flexible production facilities.• For machining with very strict tolerance values and with a high-grade surface finish• Patented cylindrical/conical coupling and radial expansion bolts to ensuremaximum rigidity and concentricity during boring and milling work• Internal coolant supply in all elements• Available in eight sizes that enables full replaceabilityType D1 M1 S NmMHD´16 16 10 2.5 2 - 2.5MHD´20 20 13 3 4 - 4.5MHD´25 25 16 3 6.5 - 7.5MHD´32 32 20 4 7 - 8MHD´40 40 25 5 16 - 18MHD´50 50 32 6 30 - 35MHD´63 63 42 8 80 - 90MHD´80 80 42 8 80 - 9010-134 Preisangaben in Euro, zzgl MwSt. Artikel mit fettgedruckten Preisen = Lagerware


MHD base holders• Case-hardened steel, hardened and ground to tolerance AT3.• Cone ISO 40 recommended exclusively for size MHD-50• For heavy milling work and bores with a depth of more than250 mm and more than 125 mm in Ø, a base holder sizeMHD-80 shall be used.• Special base holder models are available on request.<strong>Drilling</strong>DIN 69871 AD, ISO 7388/1Shank design Type MHD’d1 LmmL1mmWeightkg art.no.ISO 40 DIN69871-A40 MHD’50.48 50 48 29 0,9 372001 0002ISO 40 DIN69871-A40 MHD’63.80 63 80 - 1,5 372001 0003ISO 50 DIN69871-A50 MHD’50.48 50 48 28 2,7 372001 0007ISO 50 DIN69871-A50 MHD’63.56 63 56 37 2,8 372001 0008ISO 50 DIN69871-A50 MHD’80.62 80 62 43 3,4 372001 00091138DIN 69871-BShank design Type MHD’d1 LmmL1mmWeightkg art.no.ISO 40 69871-B40 MHD’50.48 50 48 29 0,9 372003 0001ISO 40 69871-B40 MHD’63.80 63 80 - 1,5 372003 00021138MAS 403 BTShank design Type MHD’d1 LmmL1mmWeightkg art.no.ISO 30 MAS403-BT30 MHD 50.60 50 60 - 0,7 372005 0001ISO 40 MAS403-BT40 MHD 50.48 50 48 21 0,9 372005 0003ISO 40 MAS403-BT40 MHD 63.66 63 66 - 1,2 372005 0004ISO 50 MAS403-BT50 MHD 50.66 50 66 28 3,5 372005 00081138DIN 2080-A, „OTT“Shank design Type MHD’d1 LmmL1mmMWeightkg art.no.ISO 40 DIN2080-A40 MHD’50.48 50 48 36,5 M16 0,9 372009 0001ISO 50 DIN2080-A50 MHD’50.48 50 48 33 M24 2,6 372009 0006ISO 50 DIN2080-A50 MHD’63.56 63 56 41 M24 2,7 372009 0007ISO 50 DIN2080-A50 MHD’80.60 80 60 45 M24 3,2 372009 00081138DIN 69893-A, HSKType MHD’d1 LmmL1mmWeightkg art.no.HSK-A63 MHD’50.66 50 66 40 0,9 372017 00021138All prices in euro, VAT excludedPrices in bold print = delivery ex stock10-135


Solid carbide MHD base holder, cyl. BMD• Due to the use of solid carbide MHD base holders,diff erent machining depth can be achieved.Line boring up to 10xD!<strong>Drilling</strong>Type MHD’d1 D1mmLmmL1mmL2mmMHD extensions PRWeightkg art.no.BMD 16/16.110 16 16 144 100 110 0,3 372010 1611BMD 16/16.140 16 16 174 125 140 0,4 372010 1614BMD 16/16.170 16 16 204 160 170 0,5 372010 1617BMD 20/20.135 20 20 175 125 135 0,6 372010 2013BMD 20/20.175 20 20 210 160 170 0,75 372010 2017BMD 20/20.210 20 20 250 200 210 0,9 372010 20211138Type MHD’d1 D1mmLmmL1mmL2mmWeightkg art.no.BMD 25/25.160 25 25 210 160 160 1,0 372010 2516BMD 25/25.205 25 25 255 200 205 1,3 372010 2520BMD 25/25.255 25 25 305 250 255 1,6 372010 2525BMD 32/32.195 32 32 258 200 195 2,1 372010 3219BMD 32/32.250 32 32 313 250 250 2,8 372010 3225BMD 32/32.315 32 32 378 320 315 3,5 372010 32311138• Due to the use of MHD extensions, diff erent machining depth canbe achieved; various extensions are available for any MHD sizeType MHD’d1 LmmWeightkg art.no.PR 16.25 16 25 0,04 372201 1625PR 20.32 20 32 0,07 372201 2032PR 25.25 25 25 0,09 372201 2525PR 25.40 25 40 0,15 372201 2540PR 32.32 32 32 0,2 372201 3232PR 32.50 32 50 0,3 372201 3250PR 40.40 40 40 0,4 372201 4040PR 40.63 40 63 0,6 372201 4063PR 50.50 50 50 1,1 372201 50501138MHD reducers RDType MHD’d1 LmmWeightkg art.no.PR 50.80 50 80 1,5 372201 5080PR 50.100 50 100 0,7 372201 5010PR 63.63 63 63 2,9 372201 6363PR 63.100 63 100 1,4 372201 6310PR 63.125 63 125 2,2 372201 6312PR 80.80 80 80 6,1 372201 8080PR 80.125 80 125 3,0 372201 8012PR 80.160 80 160 4,6 372201 80161138• The reductions permit the use of elements of smaller MHD sizes.• In this way, the MHD system can be used even more fl exibly.• A greater stiff ness is achieved by using smaller MHD <strong>tools</strong> in larger fi xtures.Type MHD’d1 MHD’d2 L1mmLmmMHD reducers RAVWeightkg art.no.RD 20/16.20 20 16 16 20 0,05 372203 2016RD 25/16.20 25 16 15 20 0,07 372203 2516RD 25/20.25 25 20 20 25 0,08 372203 2520RD 32/16.24 32 16 18 24 0,15 372203 3216RD 32/20.25 32 20 20 25 0,15 372203 3220RD 32/25.28 32 25 23 28 0,15 372203 3225RD 40/16.24 40 16 17 24 0,18 372203 4016RD 40/20.26 40 20 20 26 0,20 372203 4020RD 40/25.28 40 25 22 28 0,25 372203 4025RD 40/32.32 40 32 27 32 0,30 372203 4032RD 50/16.24 50 16 15 24 0,40 372203 50161138Type MHD’d1 MHD’d2 L1mmLmmWeightkg art.no.RD 50/16.40 50 16 32 40 0,20 372203 5116RD 50/20.26 50 20 18 26 0,40 372203 5020RD 50/20.70 50 20 62 70 0,30 372203 5120RD 50/25.28 50 25 21 28 0,40 372203 5025RD 50/25.87 50 25 80 87 0,60 372203 5125RD 50/32.32 50 32 25 32 0,45 372203 5032RD 50/32.87 50 32 80 87 0,75 372203 5132RD 50/40.36 50 40 30 36 0,50 372203 5040RD 50/40.87 50 40 80 87 0,90 372203 5140RD 63/50.40 63 50 34 40 0,90 372203 6250RD 80/63.60 80 63 52 60 1,70 372203 80631138• low-vibrationType MHD’d1 MHD’d2 D3mmL1mmLmmWeightkg art.no.RAV 50/16.74 50 16 17.5 65 74 0,4 372204 5016RAV 50/20.93 50 20 21.5 85 93 0,5 372204 5020RAV 50/25.117 50 25 27 110 117 0,8 372204 5025RAV 50/32.144 50 32 35 138 144 1,4 372204 5032113810-136Type MHD’d1 MHD’d2 D3mmL1mmLmmWeightkg art.no.RAV 50/40.176 50 40 47 170 176 2,5 372204 5040RAV 63/50.220 63 50 60 214 220 5,6 372204 6042RAV 80/63.280 80 63 77 272 280 10,6 372204 80421138


MHD two-flute boring bars TS• Rigid design, spline surfaces between the insert holders• Constant distance between insert holder clamping screw and cutting edge• Note: when using only one insert holder, the protective plug PT should be fi tted (optional)• Chamfer rings (AS) are available on requestTS Ø 18-200TypeDmmMHD’d1D2mmLmmL1mmS...for exchangeableCCplatesfor exchangeableSCplatesfor exchangeableTCplatesWeightkg art.no.<strong>Drilling</strong>TS 16/16 18- 22 16 16 34 - S...16 yes 0,05 372603 1616TS 20/20 22- 28 20 20 40 - S...20 yes 0,09 372603 2020TS 25/25 28- 38 25 25 50 - S...25 yes 0,20 372603 2525TS 32/32 35,5- 50 32 32 63 - S...32-33 yes yes 0,35 372603 3232TS 40/40 50- 68 40 40 80 - S...40-41 yes yes 0,70 372603 4040TS 50/50 68- 90 50 55 100 50 S...50 yes yes 1,5 372603 5050TS 50/63 90-120 50 72 80 60 S...63 yes yes yes 2,0 372603 5063TS 63/63 90-120 63 72 125 63 S...63 yes yes yes 3,0 372603 6363TS 80/80120-160160-20080 95 140 75S...80S...90yes yes yes 5,3 372603 80801138MHD insert holder SSCC / SMCC / SSSC• for dual-edge boring bars• Insert holders type SSTC available on requestSSCCTypeDmmL6mmL5mmfor indexable inserts Screw Wrench sizeSSCC 16 18 - 22 8 15 CC.. 0602.. TS25 T 08 372610 0016SSCC 20 22 - 28 9.5 19 CC.. 0602.. TS25 T 08 372610 0020SSCC 25 28 - 38 12.5 23 CC.. 0602.. TS25 T 08 372610 0025SSCC 32 38 - 50 15 32 CC.. 0602.. TS25 T 08 372610 0032SSCC 33 38 - 50 15 32 CC.. 09T3.. TS4 T 15 372610 0033SSCC 40 50 - 68 19 40 CC.. 09T3.. TS4 T 15 372610 0040SSCC 41 50 - 68 19 40 CC.. 1204.. TS5 T 25 372610 0041SSCC 50 68 - 90 22 54 CC.. 1204.. TS5 T 25 372610 0050SSCC 63 90 - 120 27 70,5 CC.. 1204.. TS5 T 25 372610 0063SSCC 80 120 - 160 32 94,5 CC.. 1204.. TS5 T 25 372610 0080SSCC 90 160 - 500 32 130 CC.. 1204.. TS5 T 25 372610 00901138art.no.SMCCTypeDmmL6mmL5mmfor indexable inserts Screw Wrench sizeSMCC 25 28 - 38 12.3 23 CC.. 0602.. TS25 T 08 372612 0025SMCC 32 38 - 50 14.8 32 CC.. 0602.. TS25 T 08 372612 0032SMCC 33 38 - 50 14.8 32 CC.. 09T3.. TS4 T 15 372612 0033SMCC 40 50 - 68 18.7 40 CC.. 09T3.. TS4 T 15 372612 0040SMCC 41 50 - 68 18.7 40 CC.. 1204.. TS5 T 25 372612 0041SMCC 50 68 - 90 21.7 54 CC.. 1204.. TS5 T 25 372612 0050SMCC 63 90 - 120 26.7 70,5 CC.. 1204.. TS5 T 25 372612 0063SMCC 80 120 - 160 31.7 94,5 CC.. 1204.. TS5 T 25 372612 0080SMCC 90 160 - 500 31.7 130 CC.. 1204.. TS5 T 25 372612 00901138art.no.SSSCTypeDmmL6mmL5mmfor indexable inserts Screw Wrench sizeSSSC 32 38 - 50 15 32,5 SC.. 09T3.. TS4 T 15 372614 0032SSSC 40 50 - 68 19 40 SC.. 09T3.. TS4 T 15 372614 0040SSSC 50 68 - 90 22 54 SC.. 1204.. TS5 T 25 372614 0050SSSC 63 90 - 120 27 70,5 SC.. 1204.. TS5 T 25 372614 0063SSSC 80 120 - 160 32 94,5 SC.. 1204.. TS5 T 25 372614 0080SSSC 90 160 - 500 32 130 SC.. 1204.. TS5 T 25 372614 00901138All prices in euro, VAT excludedart.no.Prices in bold print = delivery ex stock10-137


MHD micrometric bore bar system• The boring heads TRM and micrometric boring bars ensure a tolerance of IT6 with an optimum surface fi nish quality.• The setting with a radial correction of 1μm can easily be read off the vernier scale and executed directly on the machine.<strong>Drilling</strong>High-precision boring head TRM 50/50 Ø 6-84 mmTypeDmmLmmSF..Weightkg art.no.TRM 50/50 6-84 60 50 1,0 372801 50501138Boring bar• for high-precision boring head TRM 50/50 and TRM 50HSTypeDmmLmmL1mmfor indexable inserts Screw Wrench sizeB3.06 6- 8 29 21 WCGT 0201.. TS 21 T 06 372807 0006B3.08 8-10 36 28 WCGT 0201.. TS 21 T 06 372807 0008B3.10 10-12 43 35 TPGX 0902.. CS250T T 08 372807 0010B3.11 11-13 48 40 TPGX 0902.. CS250T T 08 372807 0011B3.12 12-14 48 42 TPGX 0902.. CS250T T 08 372807 0012B3.14 14-16 52 50 TPGX 0902.. CS250T T 08 372807 0014B3.16 16-18 58 50 TPGX 0902.. CS250T T 08 372807 0016B3.18 18-22 63 - TPGX 0902.. CS250T T 08 372807 0018B3.22 22-30 68 - TPGX 0902.. CS250T T 08 372807 00221138art.no.Boring bar, low-vibration• for high-precision boring head TRM 50/50 and TRM 50HSTypeDmmLmmfor indexable inserts Screw Wrench sizeB5.06 6 - 8 36 WCGT 0201.. TS21 T 06 372808 0006B5.08 8 - 10 45 WCGT 0201.. TS21 T 06 372808 0008B5.10 10 - 12 60 TPGX 0902.. CS250T T 08 372808 0010B5.12 12 - 14 72 TPGX 0902.. CS250T T 08 372808 0012B5.14 14 - 16 84 TPGX 0902.. CS250T T 08 372808 0014B5.16 16 - 18 96 TPGX 0902.. CS250T T 08 372808 00161138Solid carbide boring bar (approx. 8 x D)• for high-precision boring head TRM 50/50 and TRM 50HSTypeDmmLmmfor indexable inserts Screw Wrench sizeB8.06 6 - 8 45 WCGT 0201.. TS21 T 06 372809 0006B8.08 8 - 10 60 WCGT 0201.. TS21 T 06 372809 0008B8.10 10 - 12 75 TPGX 0902.. CS250T T 08 372809 0010B8.12 12 - 14 90 TPGX 0902.. CS250T T 08 372809 0012B8.14 14 - 16 105 TPGX 0902.. CS250T T 08 372809 0014B8.16 16 - 18 120 TPGX 0902.. CS250T T 08 372809 00161138art.no.art.no.Base holder P 25.63Type suitable for Weightkg art.no.P 25.63 SFTP 25 and SFTP 32 0,3 372815 2563113810-138


Reducing bushes, cylindrical• for high-precision boring head TRM 50/50 and TRM 50HSTypeLmmD H6mmD1 g6mm art.no.D04.16 23 4 16 370620 0004D08.16 22 8 16 370620 0008D10.16 23 10 16 370620 0010D12.16 23 12 16 370620 00121138<strong>Drilling</strong>High-precision boring head TRM Ø 18-63TypeDmmMHD’d1LmmL7mmSF..for exchangeableSC platesfor exchangeableTC platesWeightkg art.no.TRM 16/16 18 - 23 16 34 1 16 yes 0,05 372810 1616TRM 20/20 22 - 29 20 40 2 20 yes 0,1 372810 2020TRM 25/25 28 - 38 25 50 2 25 yes yes 0,2 372810 2525TRM 32/32 35,5 - 50 32 63 3 32 yes yes 0,35 372810 3232TRM 40/40 48 - 63 40 80 4 40 yes yes 0,7 372810 40401138High-precision boring head TRM Ø 77-500Type DmmMHD’d1 D1mmLmmTRM 50/6377-10095-125TRM 63/6377-10095-125TRM 50/8095-140140-160TRM 80/8095-140140-160135-210TRM 80/125205-310305-410405-500L1mm50 63 87,5 4963 63 87,5 4950 80 96,5 5880 80 96,5 5880 125 114 63PS..11.3012.3011.3012.3012.3013.3012.3013.3011.4012.4013.4014.40Weightkg art.no.1,71,8372832 50632,02,1372832 63632,62,8372832 50803,13,3372832 80807,28,19,2372832 801210,31138SFTP insert holder• for high-precision boring head TRMTypeDmmL6mmL5mmfor indexable inserts Screw Wrench sizeSFTP 25 28 - 38 10 26,5 TPGX 0902.. CS250T T 08 372825 0025SFTP 32 35,5 - 50 11.5 34,5 TPGX 0902.. CS250T T 08 372825 0032SFTP 40 48 - 63 14 44 TPGX 1103.. CS300890T T 08 372825 0040SFTP 50 54 - 84 19 52 TPGX 1103.. CS300890T T 08 372825 00501138SFCC insert holder• for high-precision boring head TRMTypeDmmL6mmL5mmfor indexable inserts Screw Wrench sizeSFCC 16 18 - 23 8 17 CC.. 0602.. TS25 T 08 372827 0016SFCC 20 22 - 29 8.5 21 CC.. 0602.. TS25 T 08 372827 0020SFCC 25 28 - 38 10 26,5 CC.. 0602.. TS25 T 08 372827 0025SFCC 32 35,5 - 50 11.5 34,5 CC.. 09T3.. TS4 T 15 372827 0032SFCC 40 48 - 63 14 44 CC.. 09T3.. TS4 T 15 372827 0040SFCC 50 54 - 84 19 52 CC.. 09T3.. TS4 T 15 372827 00501138All prices in euro, VAT excludedart.no.art.no.Prices in bold print = delivery ex stock10-139


MHD base holder<strong>Drilling</strong>Base holder PS• for high-precision boring heads TRM (for SF insert holder… 50)TypeL5mmLmmL6mmWeightkg art.no.PS 31.24 14,5 75 24 0,2 372835 3124PS 11.30 25 75 30.5 0,4 372835 1130PS 12.30 25 93 30.5 0,5 372835 1230PS 13.30 25 135 30.5 0,7 372835 1330PS 11.40 40 133 40 1,5 372835 1140PS 12.40 40 200 40 2,4 372835 1240PS 13.40 40 300 40 3,5 372835 1340PS 14.40 40 400 40 4,6 372835 14401138Base holder P…TypeBase holder P 20.30TypeD1mmL1mmsuitable for boring barsmmL2mmWeightkg art.no.P 20.30 06, 08, 11, 16, 22 mm 0,2 372837 20301138L5mmL6mmWeightkg art.no.P 02.30 25 40 52.5 43 30.5 0,3 372820 0230P 02.40 32 70 82.5 43 30.5 0,4 372820 0240P 03.30 27 115 127.5 43 30.5 0,7 372820 0330P 03.40 32 69 86 56 40 0,7 372820 0340P 04.30 32 114 131 56 40 1,0 372820 0430P 04.40 38 189 206 56 40 2,0 372820 04401138Counterweight CW 32Typeart.no.CW32 372836 00321138• Kit K01, TRM 50/50Modular tool systemØ 6-108 mmContents1 TRM 50/50: Each 1 B3.06 / B3.08 / B3.11 / B3.16 / B3.22,1 P25.63 Each 1 SFTP25 / SFTP32 / SFTP50,1 PS 31.24, 5 TPGX090202L,1 TPGX110302L,2 WCGT020102L,1 CW32art.no.373001 0001113810-140


Modular tool system• Sets K01, TRM 50/63 and TRM 63/63<strong>Drilling</strong>Ø 6-125 mmContents1 TRM 50/63: Each 1 B3.06 / B3.08 / B3.11 / B3.16 / B3.22,Each 1 P20.30 / P02.30 / P03.30,1 PS 11.30,Each 1 SFTP25 / SFTP32/ SFTP50,5 TPGX090202L,1 TPGX110302L,2 WCGT020102L1 TRM 63/63: Each 1 B3.06 / B3.08 / B3.11 / B3.16 / B3.22,Each 1 P20.30 / P02.30 / P03.30, 1 PS 11.30,Each 1 SFTP25 / SFTP32/ SFTP50,5 TPGX090202L,1 TPGX110302L,2 WCGT020102Lart.no.373001 0002373001 00031138Modular tool system• Sets K01, TRM 50/80 and TRM 80/80Ø 6-220 mmContents1 TRM 50/80: Each 1 B3.06 / B3.08 / B3.11/ B3.16 / B3.22,Each 1 P20.30 / P02.30, Each 1 P03.30 / P04.30,Each 1 PS 12.30 / PS13.30,Each 1 SFTP25 / SFTP32 / SFTP50,5 TPGX090202L,1 TPGX110302L,2 WCGT020102L1 TRM 80/80: Each 1 B3.06 / B3.08 / B3.11/ B3.16 / B3.22,Each 1 P20.30 / P02.30, Each 1 P03.30 / P04.30,Each 1 PS 12.30 / PS13.30,Each 1 SFTP25 / SFTP32 / SFTP50,5 TPGX090202L,1 TPGX110302L, 2 WCGT020102LAll prices in euro, VAT excludedart.no.373001 0004373001 00051138Prices in bold print = delivery ex stock10-141


ISO indexable cutting inserts• Indexable inserts used for reaming and line boring<strong>Drilling</strong>WCGT• CermetISOISO designation Cermet, DC 100art.no.WCGT 020102 L 10 373503 0569WCGT 020104 L 10 373503 06691138TPGXISO designationISO ISO ISO ISODP 300 uncoatedart.no.DK 100 uncoatedart.no.Cermet, LN 10 uncoatedart.no.Cermet, DC 100 uncoatedart.no.ISO ISO ISOCermet, DC 100T coatedart.no.D25 CBN, cubic boronnitrideart.no.D20 MDC Diamantart.no.TPGX 090202 L 373507 2010 373507 2063 373507 2069 373507 2071 373507 2073 373507 2075TPGX 090204 L 373507 2104 373507 2110 373507 2163 373507 2169 373507 2171 373507 2173 373507 2175TPGX 090208 L 373507 2263TPGX 110302 L 373507 2310 373507 2363 373507 2371 373507 2373 373507 2375TPGX 110304 L 373507 2404 373507 2463 373507 2469 373507 2471 373507 2473 373507 2475TPGX 110308 L 373507 25631138 1138 1138 1138 1138 1138 1138CCMT• CVD-coatedISOISO designationDP 100 Rart.no.CCMT 09T302 10 373509 3529CCMT 09T304 10 373509 3629CCMT 09T308 10 373509 3729CCMT 120404 10 373509 4029CCMT 120408 10 373509 4129CCMT 120412 10 373509 42291138Clamping screwsDesignation Dimensions Wrench size for indexable insertsCS 250 T M 2.5 x 0.45 T08 TPGX 0902.. 10 373205 0002CS 300890 T M 3 x 0.5 T08 TPGX 1103.. 10 373205 0003TS 21 M 2 x 0.4 T06 WCGT 0201.. 10 373205 0001TS 4 M 4 x 0.7 T15 CCMT 09T3.. SCMT 09T3.. 10 373205 0005TS 5 M 5 x 0.8 T25 CCMT 1204.. SCMT 1204.. 5 373205 00061138art.no.www.atorn.deHigh quality for great performance.Solid carbide milling cutters by ATORN:• solid carbide Ultra-finest grit with extremely smooth surface• Ultra special coatings for HPC machining• longest service life• extensive product range, many different versions• innovative cutting edge geometry for a wide range of applicationThis is but one example of ATORN‘s high-quality milling <strong>tools</strong>.10-142

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!