for GOMACO Mainline Slipform Pavers and Trimmers

tse.ak.com
  • No tags were found...

for GOMACO Mainline Slipform Pavers and Trimmers

Leica PaveSmart 3D (LMGS-S)for GOMACO Mainline SlipformPavers and TrimmersThe complete 3D solution for stringless concrete slipformingLeica Geosystems’ unique, world’s-first 3D pavingcontrol system, was successfully launched over10 years ago, and is continuously refined, based onour worldwide user community feedback to saveyou time and money, increase site safety andoptimise paving jobsite logistics.Replacing the stringlines, Leica total stationsprecisely track the machine’s position and elevation.A PC mounted on the machine calculates andcompares to the design model‘s grade and position.Steer and elevation corrections are sent to theGOMACO G21 or G22 controller, which regulatesthe hydraulics for precise control.Benefits of Leica PaveSmart 3D (LMGS-S)• nAlmost any GOMACO mainline slipform paver can beupgraded to run with Leica PaveSmart 3D (LMGS-S)• nMajor cost savings – no installation and maintenanceof stringlines required• nHigh paving accuracy: ± 3mm (± 0.01’) in height,± 10 mm (± 0.03’) in position• nPave anywhere, any time, no holdups or reliance onstringline crews• nExcellent rideability (smoothness) on highway projects• nBetter operational safety and reliability result in greaterquality and productivity• nGreatly improved jobsite logistics• n3D Project data output from any CAD system• nContinuous paving with multiple total stations


Leica PaveSmart 3D (LMGS-S)for GOMACO Mainline Slipform Pavers and TrimmersSpecial ApplicationsTake complex tunnel, bridgeand zero-clearance highwaypaving projects in your stridewith PaveSmart 3D. Improvedoperational safety,higher paving quality andpaving performance,resulting in lower costs andhigher competitiveness.9500 Series TrimmersWith no machine modificationsrequired, PaveSmart3D delivers high precisionpaving foundation. Fine-trimsubgrade or cement-boundmaterial and pave, usingonly one 3D system andsurface model. With nostringlines to introduceerrors, material yields canbe significantly improved.Offset PavingLeica PaveSmart 3D opensup a wide range of OffsetPaving applications. With noadditional components, thesystem can be fitted toOffset Paving machines.With high quality and speed,curbs, trenches and medianbarriers can be built with noneed for stringline.System Components• nIndustrial touchscreen PCwith USB Data Stick• nPaveSmart 3D Software(LMGS-S)• nTPS1200+ Series or TS30total stations• nRadio modems• nDual-axis slope sensor(s)Illustrations, descriptions and technical data are not binding. All rights reserved. Printed in Switzerland –Copyright Leica Geosystems AG, Heerbrugg, Switzerland, 2009. 759437en – XII.09 – RDVLeica Geosystems AGHeerbrugg, Switzerlandwww.leica-geosystems.com

More magazines by this user
Similar magazines