conteg data sheet optimal series cable management rack

conteg.fr
  • No tags were found...

conteg data sheet optimal series cable management rack

CONTEG SOLUTIONSfor the next decade!CONTEG has launched a new solution to support the horizontal Cross-Connect configuration or theConsolidation Point topology based on the ISO/IEC-11801, TIA/EIA-942 and TIA/EIA-568-B standards. Thenew solution is called the CABLE MANAGEMENT RACK and is recommended for use in the telecommunicationrooms where separation of active components and patch panels is required.This solution consists of the Main Cable Management Rack and the Extension. It can be installed as standalone and due to its standard depth (300 or 400mm) the corridors remain accessible.The Main Cable Management Rack is equipped with movable 19” structure (42U or 45U) and a pair of the patch cord management panels. These threeparts can be configured upon the customer’s requirement. The front to back distance can be adjusted too. The space for the cable management can beextended with the Extension Section which can be placed on both sides of the Main Cable Section.MAIN CABLE MANAGEMENT RACK FEATURES:• Frame construction• Height – 42 or 45U• Width – 900mm• Depth – 300 or 400mm• IP max. 30• Load rating 400kg• Freestanding solution (recommended attach at the wall; or connect two together)• Adjustable positioning of the 19” structure – front to rear and left, central or right• Pair of the patch cord management panels, placement upon request in combination with the 19” structure• Management panels can be equipped with cable management accessorieso Fibre Storage Spools – HDWM-FSS-50 or HDWM-FSS-100 (4x HDWM-FSS-50 included)o Plastic cable brackets – VO-xxxo Metal cable brackets - VO-Wx-xx/xx• Top and bottom covers equipped with cable entry covered by metal and plastic covers• Front vertically divided sheet steel doors, multipoint lock; rear and side panels with lock• Total useful depth of installed equipment is 264mm• When 19” extrusions are in the front position, it is valid that:EXTENDED CABLE MANAGEMENT RACK FEATURES:• Frame construction• Height – 42 or 45U• Width – 300mm• Depth – 300 or 400mm• IP max. 30• Load rating 200kgo Useful depth to rearward is 254 mm – for 300mm; and 354mm for 400mm depth of ROF-CS; when cablemanagement accessories are installed the useful depth is differento Useful frontward space is limited by multipoint lock and are at range 10 to 15 mm• Possible attach to main Cable Management Rack at both sides• Additional patch cord management panel• Management panels can be equipped with cable management accessorieso Fibre Storage Spools – HDWM-FSS-50 or HDWM-FSS-100 (2x HDWM-FSS-50 included)o Plastic cable brackets – VO-xxxo Metal cable brackets - VO-Wx-xx/xx• Top and bottom covers equipped with cable entry covered by metal and plastic covers• Front sheet steel door, single point lock; rear and side panels with lock2www.conteg.com...to complete your network


CONTEG SOLUTIONSfor the next decade!ROF-CS-42-30/30Examples of configurations4www.conteg.com...to complete your network

More magazines by this user
Similar magazines