Instruction Manual - Biometra

More documents

Recommendations

Info

4.4 The high performance smart Lid (HPSL)To achieve optimum pressure on the tubes the T3000 is equipped with a height adjustableheated lid.Close the lid:After the samples have been placed in the block close the lid. Turn the wheel clockwise untilyou hear a clicking noise. In this mode the pressure will not increase further, even when youkeep on turning the wheel.Note: The pressure of the lid has been optimized for a fully loaded block. If only very few tubesare loaded to the block you should place dummy tubes in the four corner positions to avoiddamage of tubes by excessive pressure.Open the heated lid:First: Release pressure by turning the wheel counter clockwise. As soon as there is no moreresistance the pressure has been released.Then: Now you can open the lid with the knob.Important: The lid should not be opened under pressure because this leads to damage of thelocking mechanism.18 Instruction Manual T3000 10/2009
5 Operating5.1 The T3000 displayThe T3000 display provides information about the instrument and about the status of the activeprogram.ProgStepTempTimeLid23.9C24.0C23.8C23.9C23.9C23.9CInfo System Start/Stop EditSoftkey 1 Softkey 2 Softkey 3 Softkey 4The function of the four soft keys beneath the display is context sensitive. The respectivefunction is shown in the display. The function of each key can differ from screen to screen.5.2 Navigation within the T3000 softwareThe T3000 thermocyclers provides spread sheet programming. This means that all programparameters are entered into a simple central spreadsheet.Four navigation keys provide easy navigation within the software. The back and the forward keyhave additional functions as described below:5.3 Create programThe right cursor key moves the cursor to the next field.This cursor can also be used to complete data entry. By pressing the rightcursor settings will be saved and the cursor moves to the next field.In the file directory, this key moves to cursor forward to the next (lower) level.The left cursor key moves the cursor back to the previous field.In most screens this cursor is equivalent to the ”back” softkey.In the file directory, this key moves the cursor back to the higher level.Prior to writing a new program, a program store has to be chosen. The T3000 Thermocyclerprovides 10 subdirectories of which each can store up to 99 different programs. For easyidentification of the selected storage place, the subdirectories can be named (see section).5.3.1 Select directoryStart with the main screen.Instruction Manual T3000 10/2009 19
Page 1 and 2: Instruction ManualVer. 09/10ModelOr
Page 5 and 6: 14 Warranty........................
Page 7 and 8: 1.3 Technical specifications T3000
Page 9 and 10: 2 Safety and Warning Notices2.1 Def
Page 11 and 12: This instrument is designed and cer
Page 14 and 15: T3000 ThermocyclerSerial numberBloc
Page 16 and 17: 4.2 The T3000 Thermocycler rear vie
Page 20 and 21: ProgStepTempTimeLid23.9C24.0C23.8C2
Page 22 and 23: Use cursor keys to select next lett
Page 24 and 25: Note: There is a convention on how
Page 26 and 27: - 3: -------------- 3: BIOMETRANu
Page 28 and 29: Insert / Delete step: 31: 62.0 0h 5
Page 30 and 31: 5.4.4 Delete programCopy- 3: -----
Page 32 and 33: Temp[C] Time ← # Options -->1: 62
Page 34 and 35: - 0:Start block 2- 1:- 2:- 3:-
Page 36 and 37: Prog3: BiometraStep 1Temp 20.3 62.0
Page 38 and 39: Language/Sprache:German/DeutschEngl
Page 40 and 41: Enter program name- 3: -----------
Page 42 and 43: dt[s]: Time increments. To compensa
Page 44 and 45: Important: When the clutch mechanis
Page 46 and 47: 9 Accessories9.1 PlasticwareBiometr
Page 48 and 49: 10.2 Packing of the ThermocyclerBio
Page 50 and 51: General Information for Decontamina
Page 52 and 53: 13 EU - Konformitätserklärung / E
Page 54: 15 Subject IndexDeclaration of Conf

Instruction Manual - Biometra

Create successful ePaper yourself

Delete template?

Save as template?