to download entire kuriyama-coupling catalog - national petroleum ...

All Products sold and distributed by Kuriyama of America, Inc.are in the nature of commodities and they are sold by publishedspecifications and not for particular purposes, uses orapplications. Purchaser shall first determine their suitability forthe intended purposes, uses or applications and shall eitherconduct its own engineering studies or tests, or retain qualifiedengineers, consultants or testing laboratories and consult withthem before determining the proper use, suitability or propriety ofthe merchandise or Products for the intended purposes, uses orapplications.Kuriyama of America, Inc. (“Seller”) does not recommend theProducts for any particular purpose, use or application, and thePurchaser or user thereof shall assume full responsibility for thesuitability, propriety, use and application of the Products. Purchasershall follow all instructions contained in Seller’s catalogs,brochures, technical bulletins and other documents regarding theProducts. The Products, including but not limited to, hose, tubingor couplings, may fail due to the use or conveyance of substancesat elevated or lowered temperatures or at excessive pressure,the conveyance of abrasive, injurious, flammable, explosive ordamaging substances.Cautionary StatementHose or tubing used in bent configurations will be subjected toincreased abrasion. Hose clamps or couplings may loosen afterinitial installation and all sections of hose and tubing includingconnections, couplings, clamps, conductivity and bonding shouldbe inspected frequently, regularly and consistently, and shouldbe replaced, adjusted or re-tightened for the avoidance of leakage,for the prevention of injuries or damages, and for generalsafety purposes. Except as indicated in its Limited Warranty,Seller shall not be liable or responsible for direct or indirectinjuries or damages caused by or attributed to the failure ormalfunction of any Products sold or distributed by it.Purchasers or users of the Products should frequently andconsistently undertake inspections and protective measures withrespect to the use and application of Products, which shouldinclude the examination of tube and cover, conditions of thehose or tubing, and the identification, repair or replacement ofsections showing cracking, blistering, separations, internal andexternal abrasions, leaking or slipped couplings or connectionsand make proper proof tests.The Products sold or distributed by Seller are warranted to itscustomers to be free from defects in material and workmanshipat the time of shipment by us, subject to the following provisions.ALL WARRANTY CLAIMS SHALL BE MADE WITHIN SIX(6) MONTHS AFTER SELLER SHIPPED THE PRODUCTS.SELLER’S LIABILITY HEREUNDER IS LIMITED AT SELLER’SEXCLUSIVE DISCRETION, TO 1) THE PURCHASE PRICE OFANY PRODUCTS PROVING DEFECTIVE; 2) REPAIR OF ANYDEFECTIVE PRODUCT OR PART THEREOF; OR 3)REPLACEMENT OF ANY DEFECTIVE PRODUCT OR PARTUPON ITS AUTHORIZED RETURN TO SELLER.THIS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHERWARRANTIES, EXPRESSED, IMPLIED, STATUTORY, OROTHERWISE CREATED UNDER APPLICABLE LAW INCLUD-ING, BUT NOT LIMITED TO, THE WARRANTY OF MER-CHANTABILITY AND THE WARRANTY OF FITNESS FOR APARTICULAR PURPOSE. IN NO EVENT SHALL SELLER ORLimited WarrantyTHE MANUFACTURER OF THE PRODUCT BE LIABLE FORSPECIAL, INCIDENTAL, OR CONSEQUENTIALDAMAGES, INCLUDING LOSS OF PROFITS, WHETHER ORNOT CAUSED BY OR RESULTING FROM THE NEGLIGENCEOF SELLER AND/OR THE MANUFACTURER OF THE PROD-UCT, UNLESS SPECIFICALLY PROVIDED HEREIN. IN ADDI-TION, THIS WARRANTY SHALL NOT APPLY TO ANY PROD-UCTS OR PORTIONS THEREOF WHICH HAVE BEEN SUB-JECTED TO ABUSE, MISUSE, IMPROPER INSTALLATION,MAINTENANCE, OR OPERATION, ELECTRICAL FAILURE ORABNORMAL CONDITIONS, AND TO PRODUCTS WHICH HAVEBEEN TAMPERED WITH, ALTERED, MODIFIED, REPAIRED,REWORKED BY ANYONE NOT APPROVED BY SELLER, ORUSED IN ANY MANNER INCONSISTENT WITH THE PROVI-SIONS OF THE “CAUTIONARY STATEMENT” ABOVE OR ANYINSTRUCTIONS OR SPECIFICATIONS PROVIDED WITH ORFOR THE PRODUCT.09/2005All prices and specifications subject to change without notice.KCPPL0309

Pricing Effective AUGUST 11, 2008IndexALSH Aluminum Quick-Acting Couplings...................... 7Aluminum Quick-Acting Couplings................................. 4Aluminum Quick Acting Couplings - 8˝........................... 5Aluminum Swivel Cam & Groove Couplings.................. 7Brass Pin Lug Hose Shank Couplings......................... 22Brass Quick-Acting Couplings...................................... 12Cast Aluminum Compression Quick Couplings& Adapters................................................................. 7Chemical Resistance Guide.................................... 39-41Clamps (Heavy Duty T-Bolt)......................................... 27Clamps (TigerClamp TM & Double Bolt).......................... 28Elastomer Physical Properties & ChemicalResistance Chart..................................................... 38EZ-Seal Leak Resistant Couplings ...................... 5, 23Flanged Rubber Expansion Joints(HTSRF Series - Single Sphere).............................. 36Flanged Rubber Expansion Joints(HTDRF Series - Double Sphere)............................ 37Forged “Plate-Style” Flanges (150# Carbon)............... 29Forged “Plate-Style” Flanges (150# Stainless Steel)... 30Forged Raised Face Slip-On Flanges (150# Carbon).. 32Forged Raised Face Slip-On Flanges (150# SS)......... 33Forged Raised Face Slip-On Flanges (300# Carbon).. 34Forged Threaded Flanges (150# Carbon).................... 31Glass Reinforced Nylon Quick-Acting Couplings......... 14Ground Joints......................................................... 20-21“Heavy Duty” Forged Brass Fittings............................. 23Hose and Tubing Cutter................................................ 25IRRI-LOC ® Galvanized Couplings................................ 26K-Loc TM Auto Lock SS316 Quick-Acting Couplings....... 11Material Specifications................................................. 42Menders....................................................................... 23Operating Pressures & Temperatures.......................... 43Petroleum Couplings...................................................... 6Pin Lug Hose Shank Couplings................................... 22Polypropylene Ball Valves& Handles................................................................. 16Polypropylene Quick-Acting Couplings.................. 15-16Quick Disconnect Couplers and Plugs......................... 20Reducing Coupler/Adapters, SpoolAdapters, Flange, Adapter & Coupler,Coupler X Coupler.................................................... 13Replacement Gaskets(Buna, EPDM, Buna-N, Viton ® &White Neoprene) ................................................. 6, 17Replacement Handles & Safety Clips.......................... 17Sand Blast Hose Couplings......................................... 19SS304 Stainless Steel Quick-Acting Couplings............. 9SS316 Stainless Steel Quick-Acting Couplings........... 10Stainless SteelCombination Hose Nipples....................................... 24Steel Combination Hose Nipples................................. 24Steel Hex Combination Hose Nipples.......................... 24Strainers and Skimmers............................................... 25Terms, Conditions & Limited Warranty of Sale............... 2Threaded Union Rubber Expansion Joints.................. 38Universal Air HoseCouplings - Plated.................................................... 18Weld Couplings.............................................................. 8Why Rubber Expansion Joints/Joint Movement........... 35Viton® is a registered trademark of DuPont Performance Elastomers.The trademarks contained in this publication are trademarks of Kuriyama of America, Inc.All prices and specifications subject to change without notice.KCPPL1109

Aluminum Quick-Acting CouplingsAgriculture • Chemicals/Petroleum • Construction • Material HandlingIntroducing Our New AluminumHeavy Duty 8˝ CouplingsAluminum Part A Male Adapter x Female NPTPartNumberDescriptionSizeWeightEachStandardCartonHDAL-A801 NEW Heavy Duty 8" 12.10 2AL-A800 Standard 8" 10.90 2Aluminum Part C Female Coupler x Hose ShankPartNumberDescriptionSizeWeightEachStandardCartonHDAL-C801 NEW Heavy Duty 8" 18.25 1AL-C800 Standard 8" 15.50 1Aluminum Part E Male Adapter x Female NPTPartNumberDescriptionSizeWeightEachStandardCartonHDAL-E801 NEW Heavy Duty 8" 11.75 2AL-E800 Standard 8" 10.00 2EZ-Seal Leak Resistant CouplingsIdeally suited for Layflat hoses• Indoor Watering • Agriculture • Water ConservationPart C Coupler x Hose ShankPartNumberSize(In.)Appox.WeightEachStandardCartonAL-CLF150 1 1/2 0.77 30AL-CLF200 2 0.98 40AL-CLF300 3 1.98 15AL-CLF400 4 2.87 15Part E Male Adapter x Hose ShankPartNumberSize(In.)Appox.WeightEachStandardCartonAL-ELF150 1 1/2 0.44 40AL-ELF200 2 0.64 50AL-ELF300 3 1.38 18AL-ELF400 4 2.51 20Note: To insure proper sealing attach band clamps directly over rubber seals.See Material Specifications & Operating Pressure Charts on Pages 42 & 43All prices and specifications subject to change without notice.KCPPL1109

Petroleum CouplingsPetroleumHeavy Duty Aluminum Part C Female Coupler xHose Shank with Forged Brass HandlesPartNumberSizeWeightEachStandardCartonTCC-300-A 3" 2.65 15TCC-400-A 4" 3.70 15Aluminum Part E Male Adapter x Hose ShankPartNumberSizeWeightEachStandardCartonAL-E200 2" 0.60 50AL-E300 3" 1.32 18AL-E400 4" 2.10 20Aluminum Vapor Recovery Coupler with Probewith Forged Brass Handles, Coupler x Hose ShankPartNumberSizeWeightEachStandardCartonVRP-A4030 4" X 3" 3.04 4API Aluminum Coupler x AdapterPartNumberAdapterSizeCouplerSizeWeightEachStandardCartonTCDA-A4030 3" 4" API 4.25 4TCDA-A4040 4" 4" API 4.50 4Aluminum Vapor Recovery Coupler with Probewith Forged Brass Handles, Coupler x AdapterPartNumberSizeWeightEachStandardCartonAPI AluminumCoupler x CouplerPartNumberAdapterSizeCouplerSizeWeightEachStandardCartonTCDD-A4040 4" 4” API 6.00 2DAP-4030 4" X 3" 3.54 4API Aluminum Dust CapPartNumberSizeWeightEachStandardCartonTCDC-A400 4" 3.00 6Aluminum Vapor Recovery Couplerwith Probe and Forged BrassHandles, Coupler x Female ThreadPartNumberCouplerSizeFemaleNPT SizeWeightEachStandardCartonCGDP-A4030 4" 3” 3.08 4CGDP-A4040 4" 4” 3.80 4Buna Gasket for API CouplingsPartNumberSizeWeightEachStandardCartonTCG-400 4" 0.07 1See Material Specifications & Operating Pressure Charts on Pages 42 & 43All prices and specifications subject to change without notice.KCPPL0808

ALSH Aluminum Quick-Acting Couplingswith Stainless Steel Handles, Slot Pins, Safety Clips and Pull RingsAgricultural ApplicationsAluminum Part B Female Coupler x Male NPTwith LTW Investment-Cast Stainless Steel Locking HandlesPartNumberSizeWeightEachStandardCartonALSH-B100 1" 0.36 25ALSH-B125 1 1/4" 0.62 20ALSH-B150 1 1/2" 0.70 12ALSH-B200 2" 0.86 10ALSH-B250 2 1/2" 1.02 12ALSH-B300 3" 1.56 8ALSH-B400 4" 2.42 12Aluminum Part C Female Coupler x Hose Shankwith LTW Investment-Cast Stainless Steel Locking HandlesALSH-C100 1" 0.42 25ALSH-C125 1 1/4" 0.68 20ALSH-C150 1 1/2" 0.74 10ALSH-C200 2" 0.98 12ALSH-C250 2 1/2" 1.28 12ALSH-C300 3" 2.20 5ALSH-C400 4" 3.16 6Aluminum Part D Female Coupler x Female NPTwith LTW Investment-Cast Stainless Steel Locking HandlesALSH-D100 1" 0.42 25ALSH-D125 1 1/4" 0.68 20ALSH-D150 1 1/2" 0.80 12ALSH-D200 2" 0.92 10ALSH-D250 2 1/2" 1.18 12ALSH-D300 3" 1.80 10ALSH-D400 4" 2.82 10Aluminum Part DC Dust Capwith LTW Investment-Cast Stainless Steel Locking HandlesALSH-DC100 1" 0.34 25ALSH-DC125 1 1/4" 0.58 20ALSH-DC150 1 1/2" 0.64 25ALSH-DC200 2" 0.80 20ALSH-DC250 2 1/2" 0.94 12ALSH-DC300 3" 1.44 8ALSH-DC400 4" 2.34 6Note: These couplers are supplied with locking feature . . . safety clips may be inserted to lock handles, preventing disconnection during product transfer.Our specially-designed swivel quick-couplersminimize the torque and twisting that occurswhen a hose is in service. Suggested for usewith 4" ID 2020, 2001, PF and WU Series hoses.Z-Lok Investmentcast stainless steelLTW (LifetimeWarranteed)handles.Stainless steel ballbearings ensuresmooth swivel action.NOTE:Swivel Couplings are fully interchangeablewith any otheradapters made to MIL Specs.Safety clip provides positive locking.New SmoothFlow taperedthroat design provides fullflow . . . reduces pressuredrop and material build-upin hose.SureSeal AluminumCollar Clamp (included)provides positive seal . . .eliminates cutting of hoseat shank end.BCAL150 1 1/2" 0.96 25BCAL200 2" 1.16 20BCAL250 2 1/2" 1.54 12BCAL300 3" 2.08 10Swivel Couplings — Aluminum Cam & GrooveFor use with Series PF, 2001, 2020 & WU hosesPartNumberPartNumberWeightSize Description Each(lbs.)See Material Specifications & Operating Pressure Charts on Pages 42 & 43All prices and specifications subject to change without notice.SizeWeightEachWhite Nitrile gasket helpsprevent product contamination.StandardCartonStandardCartonSCAL-C400 4" Female Part “C” 5.50 1SCAL-E400 4" Male Part “E” 3.20 1WNIT400 4" White Nitrile Gasket 0.66 10Cast Aluminum Compression Quick Couplings & AdaptersMaterial HandlingFor attachment to .065" aluminum tubing for DRY pneumatic systems only. Complete with nut and washer.Cast Aluminum Compression Quick Couplers — BCPartNumberSizeWeightEachStandardCartonCast Aluminum Compression Adapters — FCPartNumberFCAL150 1 1/2" 0.52 25FCAL200 2" 0.72 20FCAL250 2 1/2" 1.32 12FCAL300 3" 1.46 10NOTE: All Compression Quick Couplers are fully interchangeable with any other adapters made to MIL Specs.SizeWeightEachStandardCartonKCPPL0808

Weld CouplingsMaterial HandlingSocket Weld To Schedule 40 Metal PipeAluminum Part A Male AdapterPartNumberSizeWeightEachStandardCartonSW-ALA150 1 1 / 2" 0.37 30SW-ALA200 2" 0.45 40SW-ALA250 2 1 / 2" 0.65 50SW-ALA300 3" 0.77 35SW-ALA400 4" 1.41 20SW-ALA500 5" 1.70 4SW-ALA600 6" 2.08 15Butt Weld To Schedule 40 Metal Pipe and SocketWeld To Nominal OD Metal TubingAluminum Part F Male AdapterPartNumberSizeWeightEachStandardCartonBW-ALF150 1 1 / 2" 0.52 50BW-ALF200 2" 0.74 60BW-ALF250 2 1 / 2" 1.02 30BW-ALF300 3" 1.36 20BW-ALF400 4" 2.40 25BW-ALF500 5" 3.03 4BW-ALF600 6" 4.01 10Stainless Steel 316 Part A Male AdapterSW-SSA150 1 1 / 2" 0.71 25SW-SSA200 2" 1.37 12SW-SSA250 2 1 / 2" 1.38 12SW-SSA300 3" 1.87 8SW-SSA400 4" 3.95 6SW-SSA500 5" 4.46 4SW-SSA600 6" 6.16 2Stainless Steel 316 Part F Male AdapterBW-SSF150 1 1 / 2" 1.40 25BW-SSF200 2" 1.57 20BW-SSF250 2 1 / 2" 2.80 12BW-SSF300 3" 4.17 8BW-SSF400 4" 6.57 6BW-SSF500 5" 8.51 4BW-SSF600 6" 11.52 2Aluminum Part D Female CouplerSW-ALD150 1 1 / 2" 0.81 30SW-ALD200 2" 0.99 40SW-ALD250 2 1 / 2" 1.27 35SW-ALD300 3" 1.69 20SW-ALD400 4" 2.91 10SW-ALD500 5" 4.56 10SW-ALD600 6" 5.28 10Aluminum Part B Female CouplerBW-ALB150 1 1 / 2" 0.76 30BW-ALB200 2" 0.92 50BW-ALB250 2 1 / 2" 1.09 40BW-ALB300 3" 1.64 25BW-ALB400 4" 2.51 25BW-ALB500 5" 3.43 4BW-ALB600 6" 5.08 10Stainless Steel 316 Part D Female CouplerSW-SSD150 1 1 / 2" 1.41 30SW-SSD200 2" 1.70 40SW-SSD250 2 1 / 2" 2.35 35SW-SSD300 3" 3.30 20SW-SSD400 4" 5.32 10SW-SSD500 5" 7.81 10SW-SSD600 6" 20.79 10Stainless Steel 316 Part B Female CouplerBW-SSB150 1 1 / 2" 1.27 20BW-SSB200 2" 1.57 20BW-SSB250 2 1 / 2" 2.13 12BW-SSB300 3" 3.21 8BW-SSB400 4" 5.72 6BW-SSB500 5" 6.71 4BW-SSB600 6" 9.13 2The BW items above are dual purpose. They can be used as butt weld for metalpipe or socket weld for metal tubing.See Material Specifications & Operating Pressure Charts on Pages 42 & 43All prices and specifications subject to change without notice.KCPPL0309

Brass Quick-Acting CouplingsChemicals/Petroleum • ConstructionBrass Part A Male Adapter x Female NPTPartNumberSizeWeightEachStandardCartonBR-A050 1/ 2" X 1 / 2" 0.15 50BR-A075 3/4" 0.24 25BR-A100 1" 0.34 25BR-A125 1 1/4" 0.73 36BR-A150 1 1/2" 0.66 25BR-A200 2" 0.86 20BR-A250 2 1/2" 1.61 12BR-A300 3" 1.72 8BR-A400 4" 3.41 6BR-A500 5" 4.85 4BR-A600 6" 7.27 2Brass Part E Male Adapter x Hose ShankPartNumberSizeWeightEachStandardCartonBR-E050 1/ 2" X 1 / 2" 0.24 50BR-E075 3/4" 0.36 25BR-E100 1" 0.59 25BR-E125 1 1/4" 0.75 25BR-E150 1 1/2" 1.01 25BR-E200 2" 1.54 20BR-E250 2 1/2" 2.11 12BR-E300 3" 3.08 8BR-E400 4" 4.30 6BR-E500 5" 7.60 4BR-E600 6" 12.33 2Brass Part B Female Coupler x Male NPTBR-B050‡ 1/ 2" X 1 / 2" 0.36 50BR-B075● 3/4" 0.44 25BR-B100● 1" 0.66 25BR-B125● 1 1/4" 1.19 20BR-B150● 1 1/2" 1.21 20BR-B200● 2" 1.39 20BR-B250● 2 1/2" 1.87 12BR-B300● 3" 5.36 8BR-B400● 4" 4.19 6BR-B500● 5" 5.18 4BR-B600● 6" 8.15 2Brass Part C Female Coupler x Hose ShankBR-C050‡ 1/ 2" X 1 / 2" 0.35 50BR-C075● 3/4" 0.53 25BR-C100● 1" 0.81 25BR-C125● 1 1/4" 1.23 20BR-C150● 1 1/2" 1.32 20BR-C200● 2" 1.72 20BR-C250● 2 1/2" 2.42 12BR-C300● 3" 3.74 8BR-C400● 4" 5.51 6BR-C500● 5" 7.27 4BR-C600 6" 13.77 2Brass Part F Male Adapter x Male NPTBrass Part DC Dust CapBR-F050 1/ 2" X 1 / 2" 0.22 50BR-F075 3/4" 0.33 25BR-F100 1" 0.53 25BR-F125 1 1/4" 0.66 25BR-F150 1 1/2" 0.88 25BR-F200 2" 1.08 20BR-F250 2 1/2" 1.85 12BR-F300 3" 2.42 8BR-F400 4" 3.74 6BR-F500 5" 4.63 4BR-F600 6" 9.03 2BR-DC075● 3/4" 0.42 50BR-DC100● 1" 0.66 25BR-DC125● 1 1/4" 0.95 20BR-DC150● 1 1/2" 1.04 25BR-DC200● 2" 1.32 20BR-DC250● 2 1/2" 2.05 12BR-DC300● 3" 2.20 8BR-DC400● 4" 3.96 6BR-DC500● 5" 4.74 4BR-DC600● 6" 8.59 2Brass Part D Female Coupler x Female NPTBR-D050‡ 1/ 2" X 1 / 2" 0.35 50BR-D075● 3/4" 0.51 25BR-D100● 1" 0.75 25BR-D125● 1 1/4" 1.12 20BR-D150● 1 1/2" 1.21 25BR-D200● 2" 1.43 25BR-D250● 2 1/2" 1.87 12BR-D300● 3" 3.13 8BR-D400● 4" 5.29 6BR-D500● 5" 5.62 4BR-D600 6" 10.95 2Brass Part DP Dust PlugBR-DP075 3/4" 0.22 50BR-DP100 1" 0.33 25BR-DP125 1 1/4" 0.46 25BR-DP150 1 1/2" 0.53 25BR-DP200 2" 0.99 20BR-DP250 2 1/2" 0.99 12BR-DP300 3" 1.65 8BR-DP400 4" 2.42 6BR-DP500 5" 3.74 4BR-DP600 6" 4.74 2Note: Dust Caps & Dust Plugs are NOT DESIGNED FORPRESSURE APPLICATIONS.● These couplers are supplied with locking feature . . . safety clips may be inserted to lock handles, preventing disconnection during product transfer.‡ Size 1/2" x 1/2" supplied with one forged brass handle.See Material Specifications & Operating Pressure Charts on Pages 42 & 43All prices and specifications subject to change without notice.12KCPPL0808

Reducing Coupler/Adapters, Spool Adapters, FlangeAdapter & Coupler, Coupler X CouplerChemicals/PetroleumAluminum Reducing Coupler XHose ShankPartNumberSizeWeightEachAluminum Reducing Coupler/Adapter — Part D x Awith Forged Brass HandlesRDA-A2030 2" X 3" 1.64 12RDA-A3020 3" X 2" 2.37 6RDA-A3040 3" X 4" 2.60 6RDA-A4020 4" X 2" 2.70 6RDA-A4030 4" X 3" 2.96 6RDA-A6040 6" X 4" 6.66 2Brass Reducing Coupler/Adapter — Part D x AStandardCartonAL-C4030 4" X 3" 2.94 6with Forged Brass HandlesRDA-B2030 2" X 3" 2.86 6RDA-B3020 3" X 2" 6.12 6RDA-B4020 4" X 2" 7.07 6RDA-B4030 4" X 3" 9.42 6Stainless Steel Reducing Coupler/Adapter – Part D x Awith LTW (Lifetime Warranteed) Investment-Cast SS LockingHandlesRDA-SS3020 3" X 2" 4.08 6RDA-SS4030 4" X 3" 6.41 4RDA-SS6040 6" X 4" 12.10 2Aluminum Spool AdaptersPartNumberBrass Spool AdaptersSizeSA-A150 1 / 2" X 1 / 2" 0.43 50SA-A200 2" X 2" 0.68 40SA-A2030 2" X 3" 0.97 12SA-A300 3" X 3" 1.10 12SA-A3040 3" X 4" 1.78 8SA-A400 4" X 4" 1.91 6Stainless Steel Spool AdaptersWeightEachStandardCartonSA-B150 1 / 2" X 1 / 2" 1.35 50SA-B200 2" X 2" 2.11 40SA-B250 2 1 / 2" X 2 1 / 2" 3.55 30SA-B300 3" X 3" 3.69 20SA-B400 4" X 4" 5.97 6SA-SS150 1 / 2" X 1 / 2" 1.76 18SA-SS1520 1 / 2" X 2" 2.10 20SA-SS200 2" X 2" 2.48 20SA-SS2030 2" X 3" 3.14 10SA-SS300 3" X 3" 4.61 10SA-SS3040 3" X 4" 5.28 6SA-SS400 4" X 4" 7.28 6Aluminum Coupler X 150# ASA Flange DrillingAluminum Adapter X 150# ASA Flange DrillingFL-AL-A300 3" 3.86 4FL-AL-A400 4" 5.86 3FL-AL-A600 6" 9.92 2Aluminum DD Coupler X Couplerwith Forged Brass Handles and Carbon Steel Safety ClipsDD-AL200 2" X 2" 1.43 12DD-AL300 3" X 3" 2.40 6DD-AL400 4" X 4" 3.90 5FL-AL-D300 3" 5.07 3FL-AL-D400 4" 7.94 2FL-AL-D600 6" 12.89 1Stainless Steel DD Coupler X Couplerwith LTW (Lifetime Warranted) Investment-Cast SS LockingHandles and SS Safety ClipsDD-SS150 1 / 2" X 1 / 2" 2.10 20DD-SS200 2" X 2" 2.89 12DD-SS300 3" X 3" 5.11 6DD-SS400 4" X 4" 6.66 5KCPPL0808See Material Specifications & Operating Pressure Charts on Pages 42 & 43All prices and specifications subject to change without notice.13

Glass Reinforced Nylon Quick-Acting CouplingsAgriculture • ConstructionGlass Reinforced NylonPart A Male Adapter x Female NPTPartNumberSizeWeightEachStandardCartonGRA100 1" 0.16 70GRA150 1 1/2" 0.18 30GRA200 2" 0.26 40GRA300 3" 0.46 35GRA400 4" 0.92 20Glass Reinforced NylonPart F Male Adapter x Male NPTPartNumberSizeWeightEachStandardCartonGRF100 1" 0.10 45GRF150 1 1/2" 0.18 50GRF200 2" 0.28 60GRF300 3" 0.66 20GRF400 4" 0.90 25Glass Reinforced NylonPart B Female Coupler x Male NPTGRB100● 1" 0.16 30GRB150● 1 1/2" 0.46 30GRB200● 2" 0.52 50GRB300● 3" 1.02 25GRB400●■ 4" 1.34 25Glass Reinforced Nylon Part DC Dust CapGRDC100● 1" 0.16 40GRDC150● 1 1/2" 0.46 40GRDC200● 2" 0.50 60GRDC300● 3" 0.96 30GRDC400●■ 4" 1.16 15Glass Reinforced NylonPart C Female Coupler x Hose ShankGRC100● 1" 0.18 60GRC150● 1 1/2" 0.50 30GRC200● 2" 0.58 40GRC300● 3" 1.24 15GRC400●■ 4" 1.60 15Glass Reinforced Nylon Part DP Dust PlugGRDP100 1" 0.06 80GRDP150 1 1/2" 0.12 50GRDP200 2" 0.20 60GRDP300 3" 0.36 50GRDP400 4" 0.60 25Note: Dust Caps & Dust Plugs are NOT DESIGNED FORPRESSURE APPLICATIONS.Glass Reinforced NylonPart D Female Coupler x Female NPTGRD100● 1" 0.18 30GRD150● 1 1/2" 0.50 30GRD200● 2" 0.58 40GRD300● 3" 1.04 20GRD400●■ 4" 1.48 10Glass Reinforced NylonPart E Male Adapter x Hose ShankGRE100 1" 0.02 50GRE150 1 1/2" 0.18 40GRE200 2" 0.28 50GRE300 3" 0.66 18GRE400 4" 1.04 20Glass Reinforced Nylon Combination Hose Nipples —GRN Series / NPT ThreadGRN SeriesGRN050 1/ 2" 0.02 400GRN075 3/ 4" 0.04 200GRN100 1" 0.06 100GRN125 1 / 4" 0.08 80GRN150 1 / 2" 0.12 60GRN200 2" 0.22 40GRN300 3" 0.54 12GRN400 4" 0.80 12● These couplers are supplied with locking feature . . . safety clips may be insertedto lock handles, preventing disconnection during product transfer.■ All 4" couplers are supplied with THREE locking handles to provide additionalstability and prevent wobbling.See Material Specifications & Operating Pressure Charts on Pages 42 & 43All prices and specifications subject to change without notice.14KCPPL0808

Polypropylene Quick-Acting CouplingsAgriculture • ConstructionPolypropylene Part A Male Adapter x Female NPTPartNumberSizeWeightEachStandardCartonPPA050 1/ 2" X 1 / 2" 0.04 200PPA075 3/ 4" 0.05 50PPA100 1" 0.05 70PPA125 1 / 4" X 1 / 4" 0.10 40PPA150 1 / 2" 0.14 30PPA200 2" 0.19 40PPA300 3" 0.48 35PPA400 4" 1.02 20Polypropylene Part E Male Adapter x Hose ShankPartNumberSizeWeightEachStandardCartonPPE050 1/ 2" X 1 / 2" 0.03 200PPE075 3/ 4" 0.06 50PPE100 1" 0.08 50PPE125 1 / 4"X 1 / 4" 0.15 30PPE150 1 / 2" 0.17 40PPE200 2" 0.30 50PPE300 3" 0.76 18PPE400 4" 1.00 20Polypropylene Part B Female Coupler x Male NPTPPB050■ 1/ 2" X 1 / 2" 0.17 50PPB075●■ 3/ 4" 0.18 50PPB100● 1" 0.26 30PPB125● 1 / 4" X 1 / 4" 0.40 45PPB150● 1 / 2" 0.49 30PPB200● 2" 0.47 50PPB300● 3" 1.17 25PPB400● 4" 1.44 25Polypropylene Part F Male Adapter x Male NPTPPF050 1/ 2" X 1 / 2" 0.04 200PPF075 3/ 4" 0.06 50PPF100 1" 0.11 45PPF125 1 / 4" X 1 / 4" 0.15 30PPF150 1 / 2" 0.18 50PPF200 2" 0.29 60PPF300 3" 0.56 20PPF400 4" 0.81 25Polypropylene Part C Female Coupler x Hose ShankPPC050■ 1/ 2" X 1 / 2" 0.17 100PPC075●■ 3/ 4" 0.19 50PPC100● 1" 0.27 60PPC125● 1 / 4" X 1 / 4" 0.40 35PPC150● 1 / 2" 0.51 30PPC200● 2" 0.61 40PPC300● 3" 1.28 15PPC400●‡ 4" 1.70 15Polypropylene 90° Male Adapter x Female NPTPP150A90 1 / 2" 0.23 24PP200A90 2" 0.36 24Polypropylene 90° Female Coupler x Hose ShankPP150C90● 1 / 2" 0.56 24PP200C90● 2" 0.73 24Polypropylene Part D Female Coupler x Female NPTPPD050■ 1/ 2" X 1 / 2" 0.18 100PPD075●■ 3/ 4" 0.19 50PPD100● 1" 0.25 30PPD125● 1 / 4" X 1 / 4" 0.41 40PPD150● 1 / 2" 0.53 30PPD200● 2" 0.55 40PPD300● 3" 1.17 20PPD400●‡ 4" 1.58 10Polypropylene 90° Female Coupler x Female NPTPP150D90● 1 / 2" 0.65 24PP200D90● 2" 0.78 24● These couplers are supplied with locking feature . . . safety clips may be inserted to lock handles, preventing disconnection during product transfer.‡ All 4" couplers are supplied with THREE locking handles to provide additional stability and prevent wobbling.■ These couplers are supplied with 2 sintered stainless steel handles.See Material Specifications & Operating Pressure Charts on Pages 42 & 43All prices and specifications subject to change without notice.KCPPL080815

Polypropylene Quick-Acting Couplings (continued)Agriculture • ConstructionPolypropylene 90° Male Adapter x Male NPTPartNumberSizeWeightEachPolypropylene Combination Hose Nipples —PPN Series / NPT ThreadStandardCartonPP150F90 1 / 2" 0.27 24PP200F90 2" 0.41 24PPN050 1/ 2" 0.03 400PPN075 3/ 4" 0.06 200PPN100 1" 0.07 100PPN125 1 / 4" 0.11 80PPN150 1 / 2" 0.13 60PPN200 2" 0.22 40PPN300 3" 0.55 12● These couplers are supplied with locking feature . . . safety clips may be insertedto lock handles, preventing disconnection during product transfer.‡ All 4" couplers are supplied with THREE locking handles to provide additionalstability and prevent wobbling.■ These couplers are supplied with 2 sintered stainless steel handles.Polypropylene Part DC Dust CapPartNumberSizeWeightEachStandardCartonPPDC050■ 1/ 2" 0.16 100PPDC075●■ 3/ 4" 0.17 50PPDC100● 1" 0.24 40PPDC125● 1 / 4" 0.42 25PPDC150● 1 / 2" 0.47 40PPDC200● 2" 0.50 60PPDC300● 3" 1.11 30PPDC400●‡ 4" 1.06 15Polypropylene Part DP Dust PlugPPDP050 1/ 2" 0.02 200PPDP075 3/ 4" 0.03 50PPDP100 1" 0.04 80PPDP125 1 / 4" 0.06 50PPDP150 1 / 2" 0.10 50PPDP200 2" 0.15 60PPDP300 3" 0.36 50PPDP400 4" 0.50 25Note: Dust Caps & Dust Plugs are NOT DESIGNED FORPRESSURE APPLICATIONS.See Material Specifications & Operating Pressure Charts on Pages 42 & 43Polypropylene Ball Valves & HandlesFull Port • Stainless Steel Bolts and Nuts • Teflon Seals, Viton ® O-Ring Stem Seals4-Bolt Valve Design6-Bolt Valve DesignPartNumberFemaleThread SizePSIWeightEachStandardCartonPartNumberFemaleThread SizePSIWeightEachStandardCartonPPBV050 1/2" 150 0.88 24PPBV075 3/4" 150 0.85 24PPBV100 1" 150 1.16 24PPBV125 1 1/4" 150 1.65 24PPBV150 1 1/2" 150 1.67 24PPBV200 2" 150 3.71 8PPBV300 3" 100 6.60 6PPBV400 4" 75 9.90 2Viton® is a registered trademark of DuPont Performance Elastomers.Polypropylene Ball Valve HandlesPartNumberHA POLY100 1/2” - 1” 0.06 60HA POLY150 1 1/4” - 1 1/2” 0.14 40HA POLY200 2” - 4” 0.27 20All prices and specifications subject to change without notice.SizeWeightEachStandardCarton16KCPPL0309

Replacement Gaskets For Quick Acting CouplingsEPDM Gaskets for Quick-Acting Aluminum SS,Polypropylene and GlassReinforced Nylon CouplingsBuna-N Gaskets for Aluminum,Brass, 316 Stainless andK-Loc CouplingsPartNumberSizeEPDM100 1" .010 10EPDM125 1 / 4" .016 10EPDM150 1 / 2" .018 10EPDM200 2" .022 10EPDM250 2 1 / 2" .034 10EPDM300 3" .042 10EPDM400 4" .066 10Temperature Rating: -60ºF to 300ºFNote: Sold in full standard packages onlyViton ® GasketsFor Quick ActingCouplingsForged Brass Replacement Handles– with Stainless Steel Slot Pins, SSPull Rings & CS Safety ClipsPartNumberWeightEachBUNA075 3/ 4" .008 10BUNA100 1" .010 10BUNA125 1 / 4" .016 10BUNA150 1 / 2" .018 10BUNA200 2" .022 10BUNA250 2 1 / 2" .034 10BUNA300 3" .042 10BUNA400 4" .066 10BUNA500 5" .094 10BUNA600 6" .116 10BUNA800 8" .220 10Replacement Handles & Safety ClipsSizeHA BRASS075 1/ 2" – 3 / 4"HA BRASS100 1"HA BRASS200 1 / 4" – 2 1 / 2"HA BRASS300 3" – 5"HA BRASS600 6" – 8"StandardPackage†Viton® is a registered trademark of DuPont Performance Elastomers.VITON050 1/2" 0.007 10VITON075 3/4" 0.008 10VITON100 1" 0.010 10VITON125 1 1/4" 0.016 10VITON150 1 1/2" 0.018 10VITON200 2" 0.022 10VITON250 2 1/2" 0.034 10VITON300 3" 0.042 10VITON400 4" 0.066 10Temperature Rating: -20ºF to 400ºFNote: Sold in full standard packages onlyPartNumberSizeTemperature Rating: -40ºF to 250ºFNote: Sold in full standard packages onlyWhite Neoprene (FDA)Gaskets For QuickActing CouplingsInvestment Cast 304 SS LTW*Replacement Handles with SS SlotPins, SS Pull Rings & SS Safety ClipsPartNumberWeightEachSizeHA ST-STL075 1/ 2" – 3 / 4"HA ST-STL100 1"HA ST-STL200 1 / 4" – 2 1 / 2"HA ST-STL300 3" – 5"HA ST-STL600 6" – 8"StandardPackage†WN100 1" 0.010 10WN200 2" 0.022 10WN300 3" 0.042 10WN400 4" 0.066 10WN500 5" 0.094 10WN600 6" 0.116 10Temperature Rating: -45ºF to 250ºFNote: Sold in full standard packages onlySafety Clips — 304 StainlessSteel For Use On All Types ofQuick-Acting Hose Couplings*Lifetime Warranty on handles only.PartNumberSizeWeightEachStandardPkg†SCSS-200 3/ 4" – 5" .25 10SCSS-600 6 – 8" .40 10See Material Specifications & Operating Pressure Charts on Pages 42 & 43All prices and specifications subject to change without notice.KCPPL030917

Universal Air Hose Couplings - PlatedConstructionPlated 2-Lug UniversalAir Hose Couplings —Crimp FerrulePartNumberHoseODPlated 2-Lug Universal Air Hose Couplings —Hose EndPartNumberSizeWeightStd. EachWeightStd. Pkg.StandardCarton*FHE-50 54/64" - 1 2/64" 10.00 20FHE-75 1 4/64" - 1 22/64" 12.00 20FHE-100 1 18/64" - 1 34/64" 13.20 20FHE-101 1 30/64" - 1 46/64" 13.20 20StandardCarton*‡HE-38 3/8" 11 lbs 25‡HE-50 1/2" 12 lbs 25‡HE-75 3/4" 14 lbs 25‡HE-100 1" 16 lbs 25Plated 2-Lug Universal Air Hose Couplings —Male EndPartNumberPlated 2-Bolt ClampPlated 3-Way ConnectorPartNumberSizeWeightStd. Ctn.WeightStd. Ctn.StandardCarton*ME-25 1/4" 9 lbs 25ME-38 3/8" 10 lbs 25ME-50 1/2" 11 lbs 25ME-75 3/4" 12 lbs 25ME-100 1" 15 lbs 25HC-50 1"–1 1 /8" 8 lbs 25HC-75 1 1 /8"–1 5 /16" 14 lbs 25HC-100 1 17 /32"–1 21 /32" 18 lbs 25StandardCarton*TWC 25 lbs 12‡ Supplied with carbon steel safety clip and lanyard at NO CHARGEPlated 4-Lug Universal Air Hose Couplings —Hose End‡HE-125 1 1/4" 17 lbs 10‡HE-150 1 1/2" 18 lbs 10‡HE-200 2" 15 lbs 10Plated Blank EndPartNumberWeightStd. Ctn.StandardCarton*BE 13 lbs 25‡ Supplied with carbon steel safety clip and lanyard at NO CHARGEPlated 2-Lug Universal Air Hose Couplings —Female End18FE-25 1/4" 8 lbs 25FE-38 3/8" 8 lbs 25FE-50 1/2" 11 lbs 25FE-75 3/4" 12 lbs 25FE-100 1" 13 lbs 25Plated 4-Lug Universal Air Hose Couplings —Female EndFE-125 1 1/4" 9 lbs 10FE-150 1 1/2" 10 lbs 10FE-200 2" 4 lbs 10Universal Carbon Steel Safety Clips and Lanyards —For use with all Universal Air Hose and Sandblast CouplingsPartNumberRubber Air Hose GasketHoseID Size*All couplings, clamps, gaskets, safety clips and lanyards sold in full standard packages only.WARNING: Not to be used for steam service.NOTE: For safety purposes, use of lanyard and safety clip (supplied with hose ends) is recommended withall Universal Air Hose Couplings.See Operating Pressure and Temperature Chart on Page 43All prices and specifications subject to change without notice.WeightStd. Ctn.StandardCarton*USCL — .25 lbs 10PartNumberHoseID SizeWeightStd. Ctn.StandardCarton*AHG-75 1/2" – 1" 2-Lug 2 lbs 10AHG-100 1 /4" – 2" 4-Lug 2 lbs 10Temperature Range: -20° F. to 150° F.Warning: Not to be used for steam serviceKCPPL0808

Sand Blast Hose CouplingsConstructionQuick Disconnect Ends(Supplied with PhillipsHead Screws)External Nozzle Holders(Supplied with PhillipsHead Screws)Aluminum Sand Blast Hose Couplings —Quick Disconnect EndsPartNumberBrass Sand Blast Hose Couplings —Quick Disconnect EndsPartNumberQ-BR1 3/4" 1 /2" 1.06 6Q-BR2 1" 1 7 /8" 1.12 6Q-BR3 1 /4" 2 5 /32" 1.94 6Q-BR4 1 /2" 2 3 /8" 2.64 6Q-BR5 ‡ 1 /2" 2 3 /8" 3.50 6Plated Iron Sand Blast Hose Couplings —Quick Disconnect EndsPartNumberQ-PI1 3/4" 1 /2" 0.98 10Q-PI2 1" 1 7 /8" 1.02 10Q-PI3 1 /4" 2 5 /32" 1.84 10Q-PI4 1 1 /2" 2 3 /8" 2.38 10Natural Rubber Gasketsfor Sand Blast Hose CouplingsPartNumberHoseSizeHoseSizeHoseSizeHoseODQ-AL050 1/2" 1.06" 0.15 6Q-AL1 3/4" 1 /2" 0.36 6Q-AL2 1" 1 7 /8" 0.36 6Q-AL3 1 /4" 2 5 /32" 0.66 6Q-AL4 1 /2" 2 3 /8" 0.88 6Q-AL5 ‡ 1 /2" 2 3 /8" 1.10 6To be used on 1.06" OD Hose only.HoseODHoseODWeightEachWeightStd. Ctn.WeightStd. Ctn.WeightStd. Ctn.StandardCarton*StandardCarton*StandardCarton*StandardPackage*SBG 0.24 10SRG-2 ‡ 0.63 10‡ Note: QAL5, QBR5, SB-AL3, and SBBR3 are large ID full-flowfittings for 1 1 /2" ID hose and are not interchangeable with standardfittings. Full-flow fittings require SRG-2 gaskets.Aluminum Sand Blast Hose Couplings —External Nozzle Holders with Female NPS ThreadPartNumberHoseSizeHoseODNPS FemaleThread SizeNH-AL050 1/2" 1.06" 3/4" 0.15 6NH-AL1 3/4" 1 /2" 1 /4" 0.30 6NH-AL2 1" 1 7 /8" 1 /4" 0.36 6NH-AL3 1 /4" 2 5 /32" 1 /4" 0.52 6NH-AL4 1 /2" 2 3 /8" 1 /4" 0.98 6To be used on 1.06" OD Hose only.Sand Blast Quick DisconnectCouplings x Female NPTAluminum Quick DisconnectFemale Threaded Adapters — NPTWeightStd. Ctn.Std.*Ctn.Brass Sand Blast Hose Couplings —External Nozzle Holders with Female NPS ThreadPartNumberHoseSizeHoseODNPS FemaleThread SizeWeightStd. Ctn.NH-BR1 3/4" 1 /2" 1 /4" 0.94 6NH-BR2 1" 1 7 /8" 1 /4" 1.02 6NH-BR3 1 /4" 2 5 /32" 1 /4" 1.58 6NH-BR4 1 1 /2" 2 3 /8" 1 1 /4" 2.96 6PartNumberHoseSizeNPT FemaleThread SizeWeightStd. Ctn.Std.*Ctn.Std.*Ctn.SB-AL1 1 1/4" 1 1/4" 0.34 6SB-AL2 1 1/2" 1 1/2" 0.28 6SB-AL3 ‡ 1 1/2" 1 1/2" 1.05 6Brass Quick DisconnectFemale Threaded Adapters — NPTPartNumberHoseSizeSB-BR1 1 1/4" 1 1/4" 1.02 6SB-BR2 1 1/2" 1 1/2" 0.84 6SB-BR3 ‡ 1 1/2" 1 1/2" 3.05 6Universal Carbon Steel Safety Clips and Lanyards —For use with all Universal Air Hose and Sandblast CouplingsPartNumberNPT FemaleThread SizeWeightStd. Pkg.WeightStd. Ctn.Std.*Ctn.Std.*Pkg.USCL .25 lbs 10*All couplings, clamps, gaskets, safety clips and lanyards sold in full standard packages only.See Operating Pressure & Temperature Chart on Page 43All prices and specifications subject to change without notice.KCPPL080819

Quick Disconnect Couplings and PlugsIndustrial InterchangeQuick Disconnect Couplings and Plugs by Kuriyama are brass, semi-automatic and rated to 300 PSI.Coupler with Male ThreadPartNumberBodySizeThreadSizeWeightEachStandardPackage*QDAC-4MC 1/ 4" 1/ 4" 0.23 10QDAC-6MC 1/ 4" 3/ 8" 0.23 10Plug with Male ThreadPartNumberBodySizeThreadSizeWeightEachStandardPackage*QDAP-4MP 1/ 4" 1/ 4" 0.05 10QDAP-6MP 1/ 4" 3/ 8" 0.05 10Coupler with Female ThreadPartNumberBodySizeThreadSizeWeightEachStandardPackage*QDAC-4FC 1/ 4" 1/ 4" 0.23 10QDAC-6FC 1/ 4" 3/ 8" 0.23 10Plug with Female ThreadPartNumberBodySizeThreadSizeWeightEachStandardPackage*QDAP-4FP 1/ 4" 1/ 4" 0.05 10QDAP-6FP 1/ 4" 3/ 8" 0.05 10Coupler with Hose BarbPartNumberBodySizeBarbSizeWeightEachStandardPackage*QDAC-4HC 1/ 4" 1/ 4" 0.23 10QDAC-6HC 1/ 4" 3/ 8" 0.23 10Plug with Hose BarbPartNumberBodySizeBarbSizeWeightEachStandardPackage*QDAP-4HP 1/ 4" 1/ 4" 0.05 10QDAP-6HP 1/ 4" 3/ 8" 0.05 10*All Quick Disconnect Couplings and Plugs are sold in full standard packages only.Ground JointsCouplings and Clamps - Zinc PlatedHose Stem with Wing Nut and Female SpudHose Stem OnlyPartNumberSizeWeightEachStandardCartonPartNumberSizeWeightEachStandardCartonGJ-050 1/ 2" 0.75 50GJ-075 3/ 4" 1.86 25GJ-100 1" 1.81 30GJ-125 1 / 4" 3.73 15GJ-150 1 / 2" 3.68 15GJ-200 2" 5.69 10GJ-250 2 1 / 2" 12.59 4GJ-300 3" 15.85 4GJ-400 4” 28.46 2GJS-050 1/ 2" 0.18 200GJS-075 3/ 4" 0.55 100GJS-100 1" 0.51 100GJS-125 1 / 4" 1.17 32GJS-150 1 / 2" 1.30 35GJS-200 2" 1.72 25GJS-250 2 1 / 2" 3.70 10GJS-300 3" 4.83 8GJS-400 4” 8.95 420See Operating Pressure & Temperature Chart on Page 43All prices and specifications subject to change without notice.KCPPL0808

Wing NutPartNumberSizeWeightEachStandardCartonGJN-050 1/ 2" 0.31 200GJN-075 3/ 4" 0.71 60GJN-100 1" 0.71 60GJN-125 1 / 4" 1.52 40GJN-150 1 / 2" 1.52 40GJN-200 2" 2.54 24GJN-250 2 1 / 2" 4.65 10GJN-300 3" 5.51 10GJN-400 4” 10.63 4Female Spud with Copper SealingNPT ThreadWing NutThreadGJF-050 1/ 2" 0.29 200GJF-075 3/ 4" 0.64 100GJF-100 1" 0.57 100GJF-125 1 / 4" 1.21 40GJF-150 1 / 2" 1.04 40GJF-200 2" 1.39 32GJF-250 2 1 / 2" 4.23 12GJF-300 3" 5.51 10GJF-400 4” 8.88 5Male Spud with Copper SealingNPT ThreadWing NutThreadGMS-050 1/ 2" 0.29 100GMS-075 3/ 4" 0.75 60GMS-100 1" 0.79 50GMS-125 1 / 4" 1.43 30GMS-150 1 / 2" 1.70 30GMS-200 2" 2.23 30Double Spud with Copper SealingWing NutThreadWing NutThreadMale Pipe Stem (NPT)NPT ThreadGDS-050 1/ 2" 0.40 100GDS-075 3/ 4" 1.32 60GDS-100 1" 1.32 60GDS-125 1 / 4" 1.41 30GDS-150 1 / 2" 1.41 30GDS-200 2" 1.92 24GJM-050 1/ 2" 0.17 250GJM-075 3/ 4" 0.33 250GJM-100 1" 0.55 100GJM-125 1 / 4" 1.28 32GJM-150 1 / 2" 1.79 25GJM-200 2" 2.65 20GJM-250 2 1 / 2" 4.83 8GJM-300 3" 6.26 6GJM-400 4” 11.40 3All prices and specifications subject to change without notice.Ground Joints (continued)Couplings and Clamps - Zinc PlatedWhipcheck – Safety CableSTYLE WC for hose-to-hose servicePartNumberHoseIDWhipcheck – Safety CableSTYLE WS for hose-to-tool service2 Bolt Type Hose ClampsSizeWeightEachStandardCartonWC-1 1/2" - 1 /4" 1/8" 0.24 100WC-2 1 /2" - 3" 1/4" 1.15 50WS-1 1/2" - 1 /4" 1/8" 0.17 100WS-2 1 /2" - 3" 1/ 4 " 0.95 50PartNumber4 Bolt Type Hose Clamps6 Bolt Type Hose ClampsSee Operating Pressure & Temperature Chart on Page 43SizeWeightEachTorqueStd.CartonBC2-05013/ 16" – 15 / 16" .31 6 100BC2-050A15/ 16" – 1 / 16" .44 12 100BC2-050B 1 / 16" – 1 3 / 16" .42 12 100BC2-075 1 5 / 32" – 1 9 / 32" .73 21 60BC2-075A 1 3 / 16" – 1 5 / 16" .79 21 60BC2-075B 1 5 / 16" – 1 / 2" .88 21 60BC2-075C 1 1 / 2" – 1 11 / 16" 1.15 21 40BC4-100 1 17 / 32" – 1 23 / 32" 1.50 21 24BC4-100A 1 13 / 32" – 1 9 / 16" 1.54 21 24BC4-100B 1 11 / 16" – 1 27 / 32" 1.68 21 24BC4-100C 1 7 / 8" – 2 1 / 16" 1.90 21 20BC4-125 2 1 / 16" – 2 1 / 4" 2.36 40 20BC4-150 2" – 2 7 / 32" 2.40 40 20BC4-150A 2 3 / 32" – 2 9 / 32" 2.16 40 20BC4-150B 2 1 / 4" – 2 7 / 16" 2.78 40 20BC4-150C 2 15 / 32" – 2 23 / 32" 2.67 40 20BC4-200 2 11 / 32" – 2 17 / 32" 3.04 60 20BC4-200A 2 1 / 2" – 2 25 / 32" 2.84 60 20BC4-200B 2 3 / 4" – 3 1 / 16" 3.99 60 16BC4-200C 3 3 / 32" – 3 7 / 16" 3.97 60 14BC4-250 3 1 / 2" – 3 15 / 16" 6.86 150 5BC4-300 3 1 / 2" – 3 15 / 16" 7.45 150 5BC4-300A 3 13 / 16" – 4 1 / 16" 7.89 150 5BC4-300B 4 1 / 16" – 4 7 / 16" 10.19 200 4BC4-300C 4 1 / 4" – 4 13 / 16" 10.30 200 4BC6-300A 4 1 / 4" – 4 13 / 16" 12.32 150 4BC6-400A 4 7 / 8" – 5 5 / 16" 20.30 200 2BC6-400B 5 1 / 8" – 6 3 / 16" 21.45 200 2Torque Rating in Ft. lbs. Do Not Lubricate nuts and bolts.Lubricant use may affect torque rating.KCPPL080821

Pin Lug Hose Shank CouplingsAgriculture • ConstructionPin Lug Hose Shank Couplings — Full SetsAluminum Shank with Brass Swivel NutPartNumberAB150 1 1/2" 0.56 75AB200 2" 0.88 40AB250 2 1/2" 1.34 18AB300 3" 2.70 12AB400 4" 4.42 10AB600 6" 8.30 4NPSM ThreadsSizeWeightEachPin Lug Hose Shank Couplings — Female EndsAluminum Shank with Brass Swivel NutStd.Ctn.*ABF150 1 1/2" 0.38 150ABF200 2" 0.62 80ABF250 2 1/2" 0.94 36ABF300 3" 1.66 24ABF400 4" 2.72 20ABF600 6" 5.26 8NPSM ThreadsFire Hydrant Pin Lug Hose Couplings — Full Sets ‡Aluminum Shank with Brass Swivel Nut –Pin Lugs on Both Male and Female EndsPartNumberFHNST150 1 1/2" 0.43 40 SetsFHNST250 2 1/2" 1.04 12 SetsNST ThreadsSizeFire Hydrant Pin Lug Hose Couplings— Female Ends Aluminum Shankwith Brass Swivel NutWeightEachReplacement Rubber Washersfor Fire Hydrant Pin Lug Hose Couplings ONLYStd.Ctn.*FHNST-F150 1 1/2" 0.29 150FHNST-F250 2 1/2" 0.70 30NST ThreadsFHW150 1 1/2" 0.0080 10FHW250 2 1/2" 0.0168 10Pin Lug Hose Shank Couplings — Male EndsAluminum ShankABM150 1 1/2" 0.18 150ABM200 2" 0.26 80ABM250 2 1/2" 0.40 36ABM300 3" 1.04 24ABM400 4" 1.70 20ABM600 6" 3.04 8NPSM ThreadsReplacement Rubber Washersfor Pin Lug Hose Shank Couplings ONLYHW150 1 1/2" 0.0080 25HW200 2" 0.0120 25HW250 2 1/2" 0.0168 25HW300 3" 0.0312 25HW400 4" 0.0504 25HW600 6" 0.0940 10Note: Replacement washers sold in standard package quantities only.Brass Pin Lug Hose Shank CouplingsAgriculture • ConstructionPin Lug Hose Shank Couplings — Full SetsBrass Shank with Brass Swivel NutPartNumberSize(In.)Appox.WeightEachStandardCartonBB150 1 1/2" 1.17 35BB200 2" 1.98 30BB300 3" 5.00 12BB400 4" 9.38 6See Operating Pressure & Temperature Chart on Page 4322All prices and specifications subject to change without notice.KCPPL1109

EZ-Seal Leak Resistant CouplingsIdeally suited for Layflat hoses• Indoor Watering • Agriculture • Water ConservationPin Lug Hose ShankCouplings - Female EndsPartNumberSize(In.)Appox.WeightEachAluminum Shank with Brass Swivel Nut with NPSM ThreadsStandardCartonABF-LF150 1 1/2 0.37 150ABF-LF200 2 0.58 80ABF-LF300 3 1.16 24ABF-LF400 4 2.01 20Note: To insure proper sealing attach band clamps directly over rubber seals.Pin Lug Hose ShankCouplings - Male EndsPartNumberSize(In.)ABM-LF150 1 1/2 0.22 150ABM-LF200 2 0.4 80ABM-LF300 3 1.04 24ABM-LF400 4 1.48 20Aluminum Shank NPSM ThreadsAppox.WeightEachStandardCarton“Heavy Duty” Forged Brass FittingsAgriculture • Construction“Heavy Duty” Forged Brass Fitting Sets †PartNumberBRGHT050 1/2" GHT 1.18" .25 180 SETSBRGHT062 5/8" GHT 1.18" .25 180 SETSBRGHT075 3/4" GHT 1.18" .25 180 SETSBRNPS100 1" NPS 1.46" .49 120 SETS† Sold in multiples of 10 sets only. Master cartons contain smallerpackages, each of which contains 10 sets.Steel Hose Menders (Zinc Plated)PartNumberSizeSizeThreadTypeShankLengthWeightEachWeightper SetMasterCartonQty.StandardCartonSPHM050 1/2" 0.10 100SPHM062 5/8" 0.10 100SPHM075 3/4" 0.20 100SPHM100 1" 0.30 50SPHM125 1 / 4" 0.50 50SPHM150 1 / 2" 0.50 40SPHM200 2" 0.80 35SPHM250 2 1 / 2" 1.70 20SPHM300 3" 2.40 15SPHM400 4" 2.90 9SPHM600 6" 13.20 4SPHM800 8" 20.90 2“Heavy Duty” Forged Brass Fitting Female Ends ‡PartNumberSizeThreadTypeShankLengthWeightper SetMasterCartonQty.BRGHT-FEM050 1/2" GHT 1.18" .12 360 PCSBRGHT-FEM062 5/8" GHT 1.18" .12 360 PCSBRGHT-FEM075 3/4" GHT 1.18" .12 360 PCSBRNPS-FEM100 1" NPS 1.46" .25 240 PCS‡ Sold in multiples of 20 pieces only. Master cartons contain smallerpackages, each of which contains 20 pieces.MendersAgriculture • ConstructionSee Operating Pressure & Temperature Chart on Page 43All prices and specifications subject to change without notice.KCPPL030923

Steel Hex Combination Hose NipplesAgriculture • ConstructionHex Combination Hose Nipples —(Plain Steel) / NPT ThreadPartNumberSizeWeightEachStandardCartonHEX-STN050 1/2" 0.14 25HEX-STN075 3/4" 0.22 25HEX-STN100 1" 0.32 50HEX-STN125 1 1 /4" 0.50 20Hex Combination Hose Nipples —(Plated Steel) / NPT ThreadPartNumberSteel Combination Hose NipplesAgriculture • ConstructionCombination Hose Nipples —(Plain Steel) / NPT ThreadPartNumberSizeWeightEachStandardCartonSTN050 1/2" 0.14 25STN075 3/4" 0.22 25STN100 1" 0.32 50STN125 1 /4" 0.50 20STN150 1 /2" 0.70 10STN200 2" 1.04 40STN250 2 1 /2" 1.16 20STN300 3" 2.18 12STN400 4" 3.22 8STN500 5" 4.12 4STN600 6" 12.18 4Stainless Steel Combination Hose NipplesAgriculture • ConstructionSizeHEX-SPN050 1/2" 0.14 25HEX-SPN075 3/4" 0.20 25HEX-SPN100 1" 0.32 50HEX-SPN125 1 1 /4" 0.56 20Combination Hose Nipples —(Plated Steel) / NPT ThreadPartNumberSizeWeightEachWeightEachStandardCartonStandardCartonSPN050 1/2" 0.14 25SPN075 3/4" 0.20 25SPN100 1" 0.32 50SPN125 1 /4" 0.56 20SPN150 1 /2" 0.72 10SPN200 2" 1.10 40SPN250 2 1 /2" 1.74 20SPN300 3" 2.14 12SPN400 4" 3.06 8SPN600 6" 12.24 4SPN800 8" 16.44 2SPN1000 10" 21.78 1SPN1200 12" 33.18 1Combination Hose Nipples — SSNSeries (304 Stainless) NPT ThreadPartNumberSizeWeightEachStandardCartonSSN304-050 1/2” 0.18 25SSN304-075 3/4” 0.26 25SSN304-100 1” 0.35 50SSN304-125 1 1/4” 0.55 20SSN304-150 1 1/2” 0.66 10SSN304-200 2” 1.16 40SSN304-250 2 1/2” 1.31 20SSN304-300 3” 2.20 12SSN304-400 4” 3.31 8SSN304-500 5” 8.82 4SSN304-600 6” 11.02 4Combination Hose Nipples — SSNSeries (316 Stainless) NPT ThreadPartNumberSizeWeightEachStandardCartonSSN050 1/2” 0.18 25SSN075 3/4” 0.26 25SSN100 1” 0.35 50SSN125 1 1/4” 0.55 20SSN150 1 1/2” 0.66 10SSN200 2” 1.16 40SSN250 2 1/2” 1.31 20SSN300 3” 2.20 12SSN400 4” 3.31 8SSN500 5” 8.82 4SSN600 6” 11.02 424See Operating Pressure & Temperature Chart on Page 43All prices and specifications subject to change without notice.KCPPL1109

Strainers and SkimmersAgriculture • ConstructionPlated Steel Strainers & Skimmers with standard straight pipe threads (NPSM)Long Round Hole Steel StrainerPartNumberSizeWeightEachStandardCartonLHS150 1 /2" 0.75 30LHS200 2" 0.94 25LHS300 3" 2.00 16Top Hole Steel Strainer/SkimmerPartNumberSizeWeightEachStandardCartonTHS150 1 /2" 1.64 25THS200 2" 2.00 25THS300 3" 2.68 15Round Hole Steel StrainerPartNumberSquare Hole Steel StrainerRHS150 1 /2" 1.36 32RHS200 2" 1.78 18RHS250 2 1 /2" 2.02 18RHS300 3" 3.08 18RHS400 4" 2.90 18RHS600 6" 6.04 6RHS800 8" 7.34 4PartNumberSizeSizeWeightEachWeightEachStandardCartonStandardCartonSHS150 1 /2" 1.12 32SHS200 2" 1.74 18SHS300 3" 2.50 18SHS400 4" 2.52 18SHS600 6" 6.32 6Steel Bottom Hole SkimmerPartNumberPolypropylene StrainersBHS150 1 /2" 1.64 20BHS200 2" 2.00 20BHS300 3" 2.68 15Polypropylene Strainerwith Standard Straight Pipe Threads (NPSM)PartNumberSizeSizeWeightEachWeightEachStandardCartonStandardCartonPPS150 1 /2" 0.25 12PPS200 2" 0.30 18PPS300 3" 0.65 12Hose and Tubing CutterKuri-Cutter Hose & Tubing CutterPartNumberKuri-CutterApprox. Net Wt. perPkg. (lbs.)N/AAll prices and specifications subject to change without notice.KCPPL080825

IRRI-LOC ® Galvanized CouplingsAgriculture • Irrigation • ConstructionFemale Shank with NBR GasketMale Shank OnlyLocking LeverPartNumberPartNumberSizeWeightEachWeightEachStandardCartonIL-A200 2” 0.84 16IL-A300 3” 1.32 16IL-A400 4” 3.56 4IL-A600 6” 5.90 4IL-A800 8” 11.55 1StandardCartonIL-B200 2” 0.86 16IL-B300 3” 1.32 16IL-B400 4” 3.74 4IL-B600 6” 5.57 4IL-B800 8” 10.45 1PartNumberSizeNew & Improved“CAM-BARB” Design!New & Improved“CAM-BARB” Design!SizeWeightEachStandardCartonIL-C200 2” 1.03 16IL-C300 3” 2.42 12IL-C400 4” 4.07 6IL-C600 6” 8.51 4IL-C800 8” 9.15 1NBR GasketNew & Improved“CAM-BARB” Design• Greater Fitting Retention• Ease of AssemblyMale End with Locking Lever and Male NPT ThreadPartNumberPartNumberSizeSizeIL-J200 2” 0.04 40IL-J300 3” 0.13 40IL-J400 4” 0.22 30IL-J600 6” 0.53 10IL-J800 8” 0.66 10Temperature Rating: -40ºF to 180ºFWeightEachWeightEachStandardCartonIL-H200 2” 1.96 9IL-H300 3” 3.92 6IL-H400 4” 7.50 4IL-H600 6” 13.95 2IL-H800 8” 19.60 1StandardCartonFemale End with NBR Gasket and Male NPT ThreadPartNumberSizeWeightEachStandardCartonIL-F200 2” 0.90 16IL-F300 3” 1.61 16IL-F400 4” 3.39 4IL-F600 6” 5.90 4IL-F800 8” 11.55 1Safety ClipPartNumberSizeWeightEachStandardCartonIL-K200 2” 0.03 100IL-K300 3” 0.03 100IL-K400 4” 0.06 60IL-K600 6” 0.06 60IL-K800 8” 0.08 20• Shank designed for easy assembly.• NBR gaskets are included as standard.• Each locking lever coupling is provided with holes for use with safety clips. Safety clips should be used at all times to preventaccidental separation of parts while in service.• Ideal for use in suction applications in the agricultural, irrigation and construction industries. Couplings are not recommended for use inchemical or hazardous material applications.All prices and specifications subject to change without notice.26KCPPL1109

ClampsAgriculture • ConstructionHeavy Duty T-Bolt Clamps304 Stainless Steel Band,Bolt and NutPartNumberSize RangeWeightEachStandardCartonTBC-SS019 21/32” - 3/4” 0.029 500TBC-SS022 25/32” - 7/8” 0.030 500TBC-SS025 29/32” - 1” 0.031 500TBC-SS028 1 1/32” - 1 3/32” 0.031 500TBC-SS031 1 5/32” - 1 15/32” 0.052 500TBC-SS035 1 1/4” - 1 3/8” 0.052 500TBC-SS039 1 3/8” - 1 9/16” 0.053 500TBC-SS043 1 5/8” - 1 13/16” 0.055 500TBC-SS047 1 3/4” - 1 15/16” 0.090 200TBC-SS051 1 7/8” - 2 1/16” 0.095 200TBC-SS055 2 1/8” - 2 5/16” 0.098 200TBC-SS059 2 1/4” - 2 7/16” 0.100 200TBC-SS063 2 3/8” - 2 9/16” 0.103 200TBC-SS067 2 17/32” - 2 13/16” 0.105 200TBC-SS073 2 21/32” - 2 15/16” 0.150 100TBC-SS079 2 29/32” - 3 3/16” 0.160 100TBC-SS085 3 1/32” - 3 5/16” 0.160 100TBC-SS091 3 9/32” - 3 9/16” 0.165 100TBC-SS097 3 17/32” - 3 13/16” 0.180 100TBC-SS103 3 25/32” - 4 1/16” 0.180 100TBC-SS112 4 1/32” - 4 5/16” 0.190 100TBC-SS121 4 17/32” - 4 13/16” 0.195 100TBC-SS130 4 25/32” - 5 1/16” 0.200 100TBC-SS139 5 9/32” - 5 9/16” 0.292 60TBC-SS148 5 17/32” - 5 13/16” 0.308 60TBC-SS161 5 7/8” - 6 11/32” 0.319 80TBC-SS174 6 17/32” - 6 13/16” 0.328 80TBC-SS187 6 7/8” - 7 3/8” 0.340 60TBC-SS200 7 13/32” - 7 7/8” 0.357 60TBC-SS213 7 29/32” - 8 3/8” 0.367 60TBC-SS226 8 21/32” - 8 15/16” 0.383 60TBC-SS239 8 15/16” - 9 13/32” 0.400 60TBC-SS252 9 7/16” - 9 29/32” 0.417 60Heavy Duty T-Bolt Clamps304 Stainless Steel Band withCarbon Steel Bolt and NutPartNumberSize RangeWeightEachStandardCartonTBC-SSC019 21/32” - 3/4” 0.029 500TBC-SSC022 25/32” - 7/8” 0.030 500TBC-SSC025 29/32” - 1” 0.031 500TBC-SSC028 1 1/32” - 1 3/32” 0.031 500TBC-SSC031 1 5/32” - 1 15/32” 0.052 500TBC-SSC035 1 1/4” - 1 3/8” 0.052 500TBC-SSC039 1 3/8” - 1 9/16” 0.053 500TBC-SSC043 1 5/8” - 1 13/16” 0.055 500TBC-SSC047 1 3/4” - 1 15/16” 0.090 200TBC-SSC051 1 7/8” - 2 1/16” 0.095 200TBC-SSC055 2 1/8” - 2 5/16” 0.098 200TBC-SSC059 2 1/4” - 2 7/16” 0.100 200TBC-SSC063 2 3/8” - 2 9/16” 0.103 200TBC-SSC067 2 17/32” - 2 13/16” 0.105 200TBC-SSC073 2 21/32” - 2 15/16” 0.150 100TBC-SSC079 2 29/32” - 3 3/16” 0.160 100TBC-SSC085 3 1/32” - 3 5/16” 0.160 100TBC-SSC091 3 9/32” - 3 9/16” 0.165 100TBC-SSC097 3 17/32” - 3 13/16” 0.180 100TBC-SSC103 3 25/32” - 4 1/16” 0.180 100TBC-SSC112 4 1/32” - 4 5/16” 0.190 100TBC-SSC121 4 17/32” - 4 13/16” 0.195 100TBC-SSC130 4 25/32” - 5 1/16” 0.200 100TBC-SSC139 5 9/32” - 5 9/16” 0.292 60TBC-SSC148 5 17/32” - 5 13/16” 0.308 60TBC-SSC161 5 7/8” - 6 11/32” 0.319 80TBC-SSC174 6 17/32” - 6 13/16” 0.328 80TBC-SSC187 6 7/8” - 7 3/8” 0.340 60TBC-SSC200 7 13/32” - 7 7/8” 0.357 60TBC-SSC213 7 29/32” - 8 3/8” 0.367 60TBC-SSC226 8 21/32” - 8 15/16” 0.383 60TBC-SSC239 8 15/16” - 9 13/32” 0.400 60TBC-SSC252 9 7/16” - 9 29/32” 0.417 60All prices and specifications subject to change without notice.KCPPL080827

ClampsConstruction • Material HandlingTigerClamp Zinc Plated CarbonSteel Spiral Double Bolt Clamps(For Counterclockwise Spiral)Specially designed to fit Tigerflex ®PVC suction hose.Also works well on rubber suction hosePartNumberSizeWeightEachStandardCartonSDBC-1.5 1 / 2" 0.18 100SDBC-2 2" 0.36 100SDBC-2.25 2 1 / 4" 0.40 100SDBC-2.5 2 1 / 2" 0.48 100SDBC-3 3" 0.66 70SDBC-3.5 3 1 / 2" 0.70 70SDBC-4 4" 1.02 40SDBC-5 5" 1.76 30SDBC-6 6" 2.00 20SDBC-8 8" 2.76 10SDBC-10 10" 3.46 10SDBC-12 12" 4.14 10Double BoltZinc PlatedDuctile IronHose ClampsPartNumberSizeWeightEachStandardCartonDB76 2 3 / 8" – 3 1 / 64" 0.73 10DB94 3 1 / 32" – 3 11 / 16" 1.30 10DB400 3 1 / 2" – 4" 1.54 10DB463 4 1 / 16" – 4 7 / 16" 1.79 10DB525 4 3 / 16" – 5" 2.27 10DB550 5" – 5 1 / 2" 2.14 10DB600 5 1 / 2" – 6 1 / 16" 2.98 10DB675 6 1 / 8" – 6 7 / 8" 2.65 10DB769 6 15 / 16" – 7 5 / 8" 3.81 10DB818 7 11 / 16" – 8 3 / 16" 5.11 10DB875 8 1 / 4" – 8 7 / 8" 5.64 10DB988 8 15 / 16" – 9 7 / 8" 6.15 10DB1125 9 15 / 16" – 11 3 / 8" 9.61 4DB1275 11 3 / 16" – 12 1 / 2" 9.48 4DB1360 12 3 / 16" – 14" 15.43 4TigerClamp Zinc PlatedCarbon Steel Spiral DoubleBolt Clamps(For Clockwise Spiral Hoses)Designed to Fit TigerflexTiger-TR1 HosesPartNumberSizeWeightEachStandardCartonSDBCR-2 2 0.36 100SDBCR-3 3 0.66 70SDBCR-4 4 1.02 40SDBCR-5 5 1.76 30SDBCR-6 6 2.00 20All prices and specifications subject to change without notice.28KCPPL0808

Forged “Plate-Style” FlangesChemicals/Petroleum • Construction • Material Handling150# Carbon Steel Forged150# Carbon Steel Forged Plate-Style FlangesNom.SizePartNumber“A”O.D.“T”Thickness“B”BoreNo. of BoltHolesDia. of BoltHoles‘C”CircleWeightper Set1/2" CSPF0050 3 1/2" 1/2" .77" 4 5/8" 2 3/8" 1.123/4" CSPF0075 3 7/8" 1/2" 1.10" 4 5/8" 2 3/4" 1.361" CSPF0100 4 1/4" 1/2" 1.36" 4 5/8" 3 1/8" 1.581 1/4" CSPF0125 4 5/8" 1/2" 1.70" 4 5/8" 3 1/2" 1.931 1/2" CSPF0150 5" 5/8" 1.95" 4 5/8" 3 7/8" 2.702" CSPF0200 6" 5/8" 2.44" 4 3/4" 4 3/4" 4.102 1/2" CSPF0250 7" 5/8" 2.94" 4 3/4" 5 1/2" 5.353" CSPF0300 7 1/2" 5/8" 3.57" 4 3/4" 6" 5.804" CSPF0400 9" 5/8" 4.57" 8 3/4" 7 1/2" 8.005" CSPF0500 10" 3/4" 5.66" 8 7/8" 8 1/2" 10.376" CSPF0600 11" 3/4" 6.72" 8 7/8" 9 1/2" 11.768" CSPF0800 13 1/2" 1" 8.72" 8 7/8" 11 3/4" 22.4810" CSPF1000 16" 1" 10.88" 12 1" 14 1/4" 26.8312" CSPF1200 19" 1" 12.88" 12 1" 17" 42.3014" CSPF1400 21" 1" 14.14" 12 1 1/8" 18 3/4" 52.5016" CSPF1600 23 1/2" 1 1/4" 16.16" 16 1 1/8" 21 1/4" 64.00All prices and specifications subject to change without notice.KCPPL080829

Forged “Plate-Style” FlangesChemicals/Petroleum • Construction • Material Handling150# Stainless Steel Forged150# Stainless Steel Forged Plate-Style FlangesType 304Type 316Nom.“A” “T” “B” No. of Dia. of ‘C” WeightSizePartPartO.D. Thickness Bore Bolts Bolts Circle per SetNumberNumber1/2" SSPF3040050 SSPF3160050 3 1/2" 1/2" .77" 4 5/8" 2 3/8" 1.123/4" SSPF3040075 SSPF3160075 3 7/8" 1/2" 1.10" 4 5/8" 2 3/4" 1.361" SSPF3040100 SSPF3160100 4 1/4" 1/2" 1.36" 4 5/8" 3 1/8" 1.661 1/4" SSPF3040125 SSPF3160125 4 5/8" 1/2" 1.70" 4 5/8" 3 1/2" 2.001 1/2" SSPF3040150 SSPF3160150 5" 1/2" 1.95" 4 5/8" 3 7/8" 2.242" SSPF3040200 SSPF3160200 6" 1/2" 2.44" 4 3/4" 4 3/4" 3.062 1/2" SSPF3040250 SSPF3160250 7" 1/2" 2.94" 4 3/4" 5 1/2" 4.363" SSPF3040300 SSPF3160300 7 1/2" 1/2" 3.57" 4 3/4" 6" 4.724" SSPF3040400 SSPF3160400 9" 1/2" 4.57" 8 3/4" 7 1/2" 6.365" SSPF3040500 SSPF3160500 10" 1/2" 5.66" 8 7/8" 8 1/2" 7.086" SSPF3040600 SSPF3160600 11" 1/2" 6.72" 8 7/8" 9 1/2" 7.648" SSPF3040800 SSPF3160800 13 1/2" 1/2" 8.72" 8 7/8" 11 3/4" 11.4410" SSPF3041000 SSPF3161000 16" 1/2" 10.88" 12 1" 14 1/4" 13.3612" SSPF3041200 SSPF3161200 19" 1/2" 12.88" 12 1" 17" 21.0014" SSPF3041400 SSPF3161400 21" 1/2" 14.14" 12 1 1/8" 18 3/4" 27.8316" SSPF3041600 SSPF3161600 23 1/2" 1/2" 16.16" 16 1 1/8" 21 1/4" 30.00All prices and specifications subject to change without notice.30KCPPL0808

Forged Threaded FlangesChemicals/Petroleum • Construction • Material Handling150# Carbon Steel Forged ANSI B16.5 & ASTM A-105150# Carbon Steel Forged Threaded FlangesNom.SizePartNumber“A”O.D.“T”Thickness“B”BoreNo. of BoltHolesDia. of BoltHoles‘C”CircleWeightper Set1/2" CSRFTHD1500050 3 1/2" 5/8" 0.88" 4 5/8" 2 3/8" 1.103/4" CSRFTHD1500075 3 7/8" 5/8" 1.09" 4 5/8" 2 3/4" 1.981" CSRFTHD1500100 4 1/4" 3/4" 1.36" 4 5/8" 3 1/8" 2.181 1/4" CSRFTHD1500125 4 5/8" 7/8" 1.70" 4 5/8" 3 1/2" 3.091 1/2" CSRFTHD1500150 5" 7/8" 1.95" 4 5/8" 3 7/8" 3.602" CSRFTHD1500200 6" 1" 2.44" 4 3/4" 4 3/4" 5.072 1/2" CSRFTHD1500250 7" 1 1/8" 2.94" 4 3/4" 5 1/2" 7.053" CSRFTHD1500300 7 1/2" 1 1/4" 3.57" 4 3/4" 6" 7.944" CSRFTHD1500400 9" 1 3/8" 4.57" 8 3/4" 7 1/2" 13.015" CSRFTHD1500500 10" 1 3/8" 5.66" 8 7/8" 8 1/2" 14.996" CSRFTHD1500600 11" 1 1/2" 6.72" 8 7/8" 9 1/2" 18.748" CSRFTHD1500800 13 1/2" 1 3/4" 8.72" 8 7/8" 11 3/4" 29.9810" CSRFTHD1501000 16" 2" 10.88" 12 1" 14 1/4" 42.9912" CSRFTHD1501200 19" 2 1/8" 12.88" 12 1" 17" 63.93All prices and specifications subject to change without notice.KCPPL080831

Forged Raised Face Slip-On FlangesChemicals/Petroleum • Construction • Material Handling150# Carbon Steel Forged ANSI B16.5 & ASTM A-105150# Carbon Steel Forged Raised Face Slip-On FlangesNom.SizePartNumber“A”O.D.“T”Thickness“B”BoreNo. of BoltHolesDia. of BoltHoles‘C”CircleWeightper Set1/2" CSRF1500050 3 1/2" 5/8" 0.88" 4 5/8" 2 3/8" 1.103/4" CSRF1500075 3 7/8" 5/8" 1.09" 4 5/8" 2 3/4" 1.981" CSRF1500100 4 1/4" 3/4" 1.36" 4 5/8" 3 1/8" 2.181 1/4" CSRF1500125 4 5/8" 7/8" 1.70" 4 5/8" 3 1/2" 3.091 1/2" CSRF1500150 5" 7/8" 1.95" 4 5/8" 3 7/8" 3.602" CSRF1500200 6" 1" 2.44" 4 3/4" 4 3/4" 5.072 1/2" CSRF1500250 7" 1 1/8" 2.94" 4 3/4" 5 1/2" 7.053" CSRF1500300 7 1/2" 1 1/4" 3.57" 4 3/4" 6" 7.944" CSRF1500400 9" 1 3/8" 4.57" 8 3/4" 7 1/2" 13.015" CSRF1500500 10" 1 3/8" 5.66" 8 7/8" 8 1/2" 14.996" CSRF1500600 11" 1 1/2" 6.72" 8 7/8" 9 1/2" 18.748" CSRF1500800 13 1/2" 1 3/4" 8.72" 8 7/8" 11 3/4" 29.9810" CSRF1501000 16" 2" 10.88" 12 1" 14 1/4" 42.9912" CSRF1501200 19" 2 1/8" 12.88" 12 1" 17" 63.9314" CSRF1501400 21" 2 1/4" 14.14" 12 1 1/8" 18 3/4" 90.39All prices and specifications subject to change without notice.32KCPPL0808

Forged Raised Face Slip-On FlangesChemicals/Petroleum • Construction • Material Handling150# Stainless Steel Forged ANSI B16.5 & ASTM A-105150# Stainless Steel Forged Raised Face Slip-On FlangesNom.SizePartNumber“A”O.D.“T”Thickness“B”BoreNo. of BoltHolesDia. of BoltHoles‘C”CircleWeightper Set1/2" SSRF3041500050 3 1/2" 5/8" 0.88" 4 5/8" 2 3/8" 1.103/4" SSRF3041500075 3 7/8" 5/8" 1.09" 4 5/8" 2 3/4" 1.981" SSRF3041500100 4 1/4" 3/4" 1.36" 4 5/8" 3 1/8" 2.181 1/4" SSRF3041500125 4 5/8" 7/8" 1.70" 4 5/8" 3 1/2" 3.091 1/2" SSRF3041500150 5" 7/8" 1.95" 4 5/8" 3 7/8" 3.602" SSRF3041500200 6" 1" 2.44" 4 3/4" 4 3/4" 5.072 1/2" SSRF3041500250 7" 1 1/8" 2.94" 4 3/4" 5 1/2" 7.053" SSRF3041500300 7 1/2" 1 1/4" 3.57" 4 3/4" 6" 7.944" SSRF3041500400 9" 1 3/8" 4.57" 8 3/4" 7 1/2" 13.015" SSRF3041500500 10" 1 3/8" 5.66" 8 7/8" 8 1/2" 14.996" SSRF3041500600 11" 1 1/2" 6.72" 8 7/8" 9 1/2" 18.748" SSRF3041500800 13 1/2" 1 3/4" 8.72" 8 7/8" 11 3/4" 29.9810" SSRF3041501000 16" 2" 10.88" 12 1" 14 1/4" 42.9912" SSRF3041501200 19" 2 1/8" 12.88" 12 1" 17" 63.93All prices and specifications subject to change without notice.KCPPL080833

Forged Raised Face Slip-On FlangesChemicals/Petroleum • Construction • Material Handling300# Carbon Steel Forged ANSI B16.5 & ASTM A-105300# Carbon Steel Forged Raised Face Slip-On FlangesNom.SizePartNumber“A”O.D.“T”Thickness“B”BoreNo. of BoltHolesDia. of BoltHoles‘C”CircleWeightper Set1/2" CSRF3000050 3 3/4" 7/8" 0.88" 4 5/8" 2 5/8" 1.923/4" CSRF3000075 4 5/8" 1" 1.09" 4 3/4" 3 1/4" 2.531" CSRF3000100 4 7/8" 1 1/16" 1.36" 4 3/4" 3 1/2" 3.091 1/4" CSRF3000125 5 1/4" 1 1/16" 1.70" 4 3/4" 3 7/8" 3.561 1/2" CSRF3000150 6 1/8" 1 3/16" 1.95" 4 7/8" 4 1/2" 5.012" CSRF3000200 6 1/2" 1 5/16" 2.44" 8 3/4" 5" 7.052 1/2" CSRF3000250 7 1/2" 1 1/2" 2.94" 8 7/8" 5 7/8" 9.923" CSRF3000300 8 1/4" 1 11/16" 3.57" 8 7/8" 6 5/8" 13.014" CSRF3000400 10" 1 7/8" 4.57" 8 7/8" 7 7/8" 22.055" CSRF3000500 11" 2" 5.66" 8 7/8" 9 1/4" 28.006" CSRF3000600 12 1/2" 1 1/16" 6.72" 12 7/8" 10 5/8" 39.028" CSRF3000800 15" 2 7/16" 8.72" 12 1" 13" 57.9810" CSRF3001000 17 1/2" 2 5/8" 10.88" 16 1 1/8" 15 1/4" 80.9112" CSRF3001200 20 1/2" 2 7/8" 12.88" 16 1 1/4" 17 3/4" 115.08All prices and specifications subject to change without notice.34KCPPL0808

Why Rubber Expansion Joints?There are a number of reasons why rubber expansion jointscan provide the ideal solution to your piping and plumbingproblems:● Minimal face-to-face dimensions — Rubber expansionjoints require considerably less space than typicalexpansion bends or loops and frequently have a lowerpressure drop. This can translate into savings oninstallation costs, as well as improved performance.● Light weight — Rubber expansion joints are relativelylight in weight. This makes installation easier and lesscostly.● Low movement forces required — The natural flexibilityof rubber expansion joints allows almost unlimited flexingand recovery, as well as requiring less force to move. Thishelps prevent damage to costly equipment and expensivedown time.● Reduced fatigue factor — The elastomers used in rubberexpansion joints are not subject to fatigue breakdown orembrittlement. And they prevent electrolytic action.● Reduced heat loss — Rubber expansion joints reduceheat losses and give longer maintenance-free service.● Corrosion- and erosion-resistance — The superiorcorrosion-resistant characteristics of rubber expansionjoints permit the safe handling of a wide variety of materialswithin the rated pressures and temperatures shown.Typical ApplicationsAir Conditioning, Heating & Ventilation SystemsCommercial & Institutional Buildings HospitalsSchoolsMotelsApartmentsHotelsStoresAboard Ships & BoatsCentral & Ancillary Power Generating StationsCommunitiesBuildingsFactoriesAboard Ships & BoatsSewage Disposal & Water Treatment PlantsIrrigation & Fire Fighting StationsProcess PipingPulp & PaperChemicalPrimary MetalPetroleum RefiningRubber Expansion Joint MovementExpansion joints are designed to absorb different movements concurrentlyAxial Compression Axial Elongation Angular DeflectionBending of the CenterlineTorsional MovementRotation about the centerline (twist)Transverse DeflectionPerpendicular to centerlineVibrationAll prices and specifications subject to change without notice.KCPPL020835

Flanged Rubber Expansion JointsChemicals/Petroleum • ConstructionHTSRF SeriesSingle Sphere Flanged Rubber Expansion JointsConstruction — Nylon fabric-reinforcedneoprene body with hardened spring steelwire reinforcement and forged carbon steelflanges.Features —● Excellent ability to absorb vibration andsound.● Allows for four-way movement.● Withstands high pressure.● Easy installation, using floating flanges.● Excellent for use with moderate chemicalsand acids, most oils, fats and grease andmany solvents. Not for use with oxidizingacids, esters and ketones.HTSRF SeriesSingle Sphere Flanged Rubber Expansion JointPart No.DiameterIn.mmAllowable Movement“L”In. Axial Axial Transverse AngularCompression Elongation Deflection DeflectionOperating ConditionMax. Max. Vacuum WeightPressure Temp. Rating EachPSIG ° F. HG In. (lbs.)HTSRF 12X6 1 1/4” 32 6” 1/2” 3/8” 1/2” 15° 225 220 16 5.0HTSRF 15X6 1 1/2” 40 6” 1/2” 3/8” 1/2” 15° 225 220 16 6.1HTSRF 20X6 2” 50 6” 1/2” 3/8” 1/2” 15° 225 220 16 8.9HTSRF 25X6 2 1/2” 65 6” 1/2” 3/8” 1/2” 15° 225 220 16 12.3HTSRF 30X6 3” 80 6” 1/2” 3/8” 1/2” 15° 225 220 16 14.0HTSRF 40X6 4” 100 6” 5/8” 3/8” 1/2” 15° 225 220 16 18.3HTSRF 50X6 5” 125 6” 5/8” 3/8” 1/2” 15° 225 220 16 22.8HTSRF 60X6 6” 150 6” 5/8” 3/8” 1/2” 15° 225 220 16 26.8HTSRF 80X6 8” 200 6” 5/8” 3/8” 1/2” 15° 225 220 16 40.6HTSRF 100X8 10” 250 8” 3/4” 1/2” 3/4” 15° 225 220 16 56.6HTSRF 120X8 12” 300 8” 3/4” 1/2” 3/4” 15° 225 220 16 83.0HTSRF 140X8 14” 350 8” 3/4” 1/2” 3/4” 15° 140 220 16 115.0HTSRF 160X8 16” 400 8” 3/4” 1/2” 3/4” 15° 140 220 16 165.0HTSRF 180X8 18” 450 8” 3/4” 1/2” 3/4” 15° 125 220 16 168.0HTSRF 200X8 20” 500 8” 3/4” 1/2” 3/4” 15° 125 220 16 170.0All prices and specifications subject to change without notice.36KCPPL0208

Flanged Rubber Expansion JointsChemicals/Petroleum • ConstructionHTDRF SeriesDouble Sphere Flanged Rubber Expansion JointsConstruction — Nylon fabric-reinforcedneoprene body with hardened spring steelwire reinforcement and forged carbonsteel flanges.Features —● Excellent ability to absorb vibration andsound.● Allows for four-way movement.● Withstands high pressure.● Easy installation, using floating flanges.● Excellent for use with moderatechemicals and acids, most oils, fatsand grease and many solvents. Not foruse with oxidizing acids, esters andketones.HTDRF SeriesDouble Sphere Flanged Rubber Expansion JointPart No.DiameterIn.mmAllowable Movement“L”In. Axial Axial Transverse AngularCompression Elongation Deflection DeflectionNote: Retention rings are supplied with all Double Sphere Flanged Expansion Joints.Operating ConditionMax. Max. Vacuum WeightPressure Temp. Rating EachPSIG ° F. HG In. (lbs.)HTDRF 12X7 1 1/4” 32 7” 2” 1 1/4” 1 1/2” 40° 150 220 16 5.3HTDRF 15X7 1 1/2” 40 7” 2” 1 1/4” 1 1/2” 40° 150 220 16 6.8HTDRF 20X7 2” 50 7” 2” 1 1/4” 1 1/2” 40° 150 220 16 9.0HTDRF 25X7 2 1/2” 65 7” 2” 1 1/4” 1 1/2” 40° 150 220 16 13.3HTDRF 30X7 3” 80 7” 2” 1 1/4” 1 1/2” 40° 150 220 16 14.3HTDRF 40X9 4” 100 9” 2 1/4” 1 1/2” 1 3/4” 35° 150 220 16 20.3HTDRF 50X9 5” 125 9” 2 1/4” 1 1/2” 1 3/4” 35° 150 220 16 24.5HTDRF 60X9 6” 150 9” 2 1/4” 1 1/2” 1 3/4” 35° 150 220 16 29.5HTDRF 80X13 8” 200 13” 2 1/2” 1 1/2” 1 3/4” 30° 150 220 16 43.8HTDRF 100X13 10” 250 13” 2 1/2” 1 1/2” 1 3/4” 30° 150 220 16 64.1HTDRF 120X13 12” 300 13” 2 1/2” 1 1/2” 1 3/4” 30° 150 220 16 95.0All prices and specifications subject to change without notice.KCPPL020837

Threaded Union Rubber Expansion JointsChemicals/Petroleum • ConstructionHTDRU Series Threaded Union Rubber Expansion JointPart No.DiameterIn.mmConstruction — Nylon fabric-reinforced neoprenebody with cast ductile iron ground pipe unions.Features —• Superb vibration absorption.• Effective for large eccentricity thermal andbending angles.• Low-cost installation and operation.• Excellent for use with moderate chemicalsand acids, most oils, fats and grease andmany solvents. Not for use with oxidizingacids, esters and ketones.HTDRU Series Threaded Union Rubber Expansion JointAllowable Movement“L”In. Axial Axial Transverse AngularCompression Elongation Deflection DeflectionOperating ConditionAll prices and specifications subject to change without notice.Max. Max. Vacuum WeightPressure Temp. Rating EachPSIG ° F. HG In. (lbs.)HTDRU0075 3/4” 20 8” 7/8” 1/4” 7/8” 45° 150 240 16 1.8HTDRU0100 1” 25 8” 7/8” 1/4” 7/8” 45° 150 240 16 2.75HTDRU0125 1 1/4” 32 8” 7/8” 1/4” 7/8” 45° 150 240 16 3.5HTDRU0150 1 1/2” 40 8” 7/8” 1/4” 7/8” 45° 150 240 16 4.0HTDRU0200 2” 50 8” 7/8” 1/4” 7/8” 45° 150 240 16 5.0Elastomer Physical Properties & Chemical ResistanceCommon NameMaterial Neoprene Natural Rubber BUTYL BUNA-N/Nitrile Hypalon EPDMDesignation Chloroprene Polyisoprene, Isobutene- Nitrile- Chloro-Sulfonyl- Ethylene-Propylene-Synthetic Isoprene Butadiene Polyethylene Diene-TerpolymerANSI/ASTM CR IR IIR NBR CSM EPDMD1418-17ASTM D-2000 bC bF bASAE J-200 bE AA AA bK CE CACHDAOzone VG X E F O OWeather E F VG F E ESunlight VG X VG X O OOxidation VG G E G E EHeat G F VG G G ECold G VG G FG G VGFlame G X X X G XTear G VG G FG FG GAbrasion VG E G G G VGImpermeability G F E G G GDynamic F F F VG F VGRebound-Hot VG E VG G G ERebound-Cold G E X G F EComp. Set F G FG VG F GTensile Strength G E G VG F VGDielectric Strength VG E VG X VG OElectrical Insulation FG VG VG PF FG EWater Absorption G VG VG G G ERadiation VG E G VG VG OSwelling in Oil G X X VG G XAcid, Dilute E FG E G E EAcid, Concentrated G FG G G G GAliphatic Hydrocarbons FG X X E FG XAromatic Hydrocarbons F X X G F XOxygenated Hydrocarbons PF G G X PF ELacquers X X FG F X FGOil & Gasoline G X X VG G XAlkali, Dilute G ND G G G EAlkali, Concentrated X ND G X G EAnimal & Vegetable Oil G ND VG VG G VGChemical FG FG E FG E EWater G VG VG G VG VGNote: This chart is only intended for use as a general guide. Specific elastomer compounds produced by various manufacturers may have different properties.Where chemical-resistance and mechanical characteristics are important, the product should be tested using the exact chemical formulation and under the exactenvironmental conditions the product will normally encounter in service.Key to Ratings: O – Outstanding E – Excellent VG – Very Good G – GoodFG – Fair-to-Good F – Fair PF – Poor-to-Fair X – Poor ND – No Data38KCPPL0309

Chemical Resistance GuideRatings: E = Excellent; G = Good; F = Fair; A = Acceptable; X = Not Recommended; – = Contact FactoryCAUTION: This data has been compiled from generally availablesources and should not be relied upon without consulting themanufacturer regarding specific applications and coupling materials.All Ratings are based on 70° F. Chemical compatibility varies greatlywith temperature. For applications at temperatures other than 70° F,contact Factory for recommendations.Chemical Resistance of a material does not necessarily indicate thesuitability of a fitting for a given application due to such variablesas hose construction, gasket material, and the type and method ofattaching clamps.SPECIAL CAUTION SHOULD BE TAKEN WHEN HANDLINGHAZARDOUS MATERIALS.ChemicalAluminumBrass304 Stainless Steel316 Stainless SteelNylonAcetate Solvents (Crude) E X E E A XAcetate Solvents (Pure) E E E E A XAcetic Acid (80%) F X E E X XAcetic Acid (50%) G X G E X XAcetic Acid (20%) G X G E X XAcetic Acid (10%) G X E E X XAcetic Anhydride G X G G X XAcetone E G E E A XAcetyIene E X E E X XAlcohol, Amyl G G G G A AAlcohol, Benzyl G G E E X AAlcohol, Butyl E G E E A AAlcohol, Diacetone E E G G X AAlcohol, Ethyl E G G G X AAlcohol, Hexyl – – – – A –Alcohol, Isobutyl – – – – A –Alcohol, Isopropyl G G G G A AAlcohol, Methyl (Methanol) G G G G A AAlcohol, Octyl – – – – A –Alcohol, Propyl G G E E X AAluminum Chloride (Aqu.) X X X X A AAluminum Fluoride (Sat.) G – X G X AAluminum Nitrate (Sat.) F X G G A AAluminum PotassiumSulfate (Alum) G G X G X AAluminum Sulfate (Sat.) X X – G A AAmmonia Anhydrous E X G E A XAmmonia Gas X X E E A XAmmonia Nitrate – – – – X –Ammonium Biflouride – X – – X AAmmonium Carbonate (Sat.) G X G G A AAmmonium Casenate – – – – A –Ammonium Chloride (Sat.) X X X X A AAmmonium Hydroxide (Sat.) G X G G A AAmmonum Nitrate G X – – A AAmmonium Phosphate(10-40%) X X E G A AAmmonium Sulfate (10-40%) X X X G A AAniline – X E E X XArsenic Acid X X G G X AAsphalt – – – G X XBarium Carbonate (Sat.) X G G G A ABarium Chloride (Sat.) – G X – A ABarium Hydroxide (Sat.) X G G G A ABarium Sulfate G G G G A APolypropyleneChemicalAluminumBrass304 Stainless Steel316 Stainless SteelNylonBarium Sulfide X X G G A ABeer E G E E A ABenzaldehyde G G G G X XBenzene, Benzol E G G G A XBenzine – – – – A XBenzoic Acid G G G G X XBlack Liquor X X G G X ABleach (12.5% Active Chlorine) X – – X X ABorax X G E E X ABoric Acid E X – – X ABrine Acid – G – – X ABromic Acid X X – – X ABromine Liquid G – X X X XButadiene, Butylene G G G G X XButane G G G G X XButyl Acetate E G G G A XButvric Acid G G G G A ACalcium Bisulfate X – X G X ACalcium Bisulfide – – – G A ACalcium Bisulfite X X – G X ACalcium Carbonate X G E G A ACalcium Chloride (Sat.) – G – – A ACalcium Hydroxide (Sat.) X G G G A ACalcium Hypochlorite (Sat.) X X X G X ACarbon Bisulfide E X G G A XCarbon Dioxide (Dry) E E G G A ACarbon Dioxide (Wet) E X G G X ACarbon Disulfide E X G G A XCarbon Monoxide E E E E A ACarbon Tetrachloride X – E – A XCarbonic Acid E G G G X ACastor Oil G G G G X ACaustic Potash X – – G A ACellosolves G G G G X AChlorine (Liquid) – – – F X XChloroform – – – – X XChlorosulfonic Acid – X X X X XClorox (Bleach, 5.5% CL) X – – G X –Chromic Acid (50%) G X F – X XCitric Acid F X – – X ACoke Oven Gas G F G G X XCopper Chloride X X X X A ACopper Cyanide X X G G X –Copper Sulfate X X – G A ACrysylic Acid (Conc.) G G G G X XPolypropyleneAll prices and specifications subject to change without notice.KCPPL020639

Chemical Resistance GuideRatings: E = Excellent; G = Good; F = Fair; A = Acceptable; X = Not Recommended; – = Contact FactoryChemical ChemicalAluminumBrass304 Stainless Steel316 Stainless SteelNylonCyclohexane G G G G A XDetergents G G E G A ADextrose G – – – A ADiesel Fuels E E E E A XDiethylamine G – G G X ADisodium Phosphate – – – E A AEthers G G E E A XEthyl Acetate – – G G A XEthyl Chloride – – – E A XEthylene Chloride – – – – A XEthylene Dichloride – G G G A XEthylene Glycol E G G G A XEthylene Oxide E X G G X XFatty Acids E F – E A AFerric Chloride X X X X X AFerric Hydroxide – – E E A –Ferric Nitrate (10-50%) X X G G X AFerric Sulfate X X – – X AFerrous Chloride (Sat.) X X X X X AFerrous Sulfate G G G – X AFluboric Acid X – – – X AFormaldehyde (50%) – G E E X AFormic Acid (Anhyd.) E X – – X AFreon 11 G G G G A XFreon 12 G G G G A XFreon 22 G G G G A XFruit Juices G G G G A AFuel Oil G G G G A XFurfural G G G G A XGasoline, Refined G G G G A XGasoline, Sour X G G G A XGelatin G G G G A AGlucose G G G G A AGlue G G – G – AGlycerine E E E E A AGlycols G G G G A AGreen Liquor – – – – – AHeptane G G G G A XHexane G G E E A XHydrobromic Acid (50%) X X X X X AHvdrobromic Acid (20%) X X X X X AHvdrochloric Acid (20%) X X X X X AHydrochloric Acid (38%) X X X X X AHydrocyanic Acid G X G G X AHydrofluosilicic Acid (10-50%) X G X G X –Hydrogen Peroxide (50%) – X – – X AHydrogen Sulfide (Aqueous) – – X G X AHydrogen Chloride (Dry Gas) X G – – X AHydrogen Gas E E E E X AHypochlorous Acid X X X X X XIodine E X X X X AIsopropyl Ether – G E G A XJet Fuel (JP4, JPS) G E G G X XKerosene G G G G X XPolypropyleneKetones G G G G A XLactic Acid (25%) F G – – A ALactic Acid (80%) G G – – A ALard Oil G – G G A ALead Acetate X X G G X ALead Chloride X – G G X –Lead Sulfate X – G G X –Lime Sulphur X X G G X ALinoleic Acid G X G G X ALinseed Oil G G G G A ALubricants (Oil) G E G G A XMagnesium Carbonate G – G G X AMagnesium Chloride X X – – X AMagnesium Hydroxide G G E E X AMaanesium Nitrate G G G G X AMagnesium Oxide – – – – X –Magnesium Sulfate G – G G X AMaleic Acid – G – G X AMercuric Chloride X X X – X AMercuric Cyanide X X G G X AMercury X X E E A AMethane E E E E A XMethanol G G G G A AMethyl Bromide X – G G X XMethyl EthyI Ketone G G G G A XMethyl Isobutyl Ketone G G G G A XMethyl Methacrylate G – G G X AMethylene Chloride – G – – A XMilk E X E E A AMineral Oil G E E G A AMuriatic Acid X – X X X ANapthalene G G E E A ANaptha G G G G A XNickel Chloride X X – – X ANickel Sulfate X X G G X ANitric Acid (100%) E X G – X XNitric Acid (50%) X X G – X XNitric Acid (30%) X X E – X XNitrobenzene E G G G A AOil, Castor G G G G A AOil, Coconut G – G G A AOil, Corn G G – G A AOil, Cotton Seed G G G G A AOil, Fuel G G G G A XOil, Linseed G G G G A AOil, Mineral G E E G A AOil, Silicon G E G G A AOil, Vegetable G G E E A XOleic-Acid G F – E A XOleum G X G G X XOxalic Acid (Sat.) G – X X X AOxygen G G G G X XPalmitic Acid (Sat.) G F G G X AParaffin G G G G A AAll prices and specifications subject to change without notice.AluminumBrass304 Stainless Steel316 Stainless SteelNylonPolypropylene40KCPPL0206

Chemical Resistance GuideRatings: E = Excellent; G = Good; F = Fair; A = Acceptable; X = Not Recommended; – = Contact FactoryChemicalAluminumBrass304 Stainless Steel316 Stainless SteelNylonPerchloroethylene G G – – X XPetrolatum G – G G A –Phenol (Carbolic Acid) E E – E X XPhosphoric Acid (25-50%) X X – – X APhosphoric Acid (50-85%) X X – – X APhotographic Solutions – – E E X XPhthalic Anhydride – G E E X XPicric Acid E X G G X –Plating Solution, Brass – – – G X APlating Solution,Cadmium Plating – – – G X APlating Solution,Chrome (40%) X G G G X APlating Solution,Copper (Cyanide) – – – – X APlating Solution, Gold – – – E X APlating Solution, Iron – – – – X APlating Solution, Lead – – E E X APlating Solution, Nickel – – E E X APlating Solution, Silver – – E E X APlating Solution, Tin – – – F X APlating Solution, Zinc – – – – X APotassium Acetate X X – – A APotassium Bicarbonate (30%) X G E E A APotassium Carbonate (50%) X G E E A APotassium Chlorate (30%) G X G E X APotassium Chloride (30%) X X – – A APotassium Chromate (30%) G G G G X APotassium CyanideSolution (30%) X X G G X APotassium Dichromate (30%) E G E I X APotassium Hydroxide (90%) X X X – X APotassium Nitrate (80%) E G G G X APotassium Permanganate (20%) G G G G X APotassium Sulfate (10%) E G E E A APropane E E G G X XPropylene Gylcol G G G G A APropylene Oxide (90%) – – E E X XPyridine G G G G A XPyrogallic Acid G G G G X XSilver Nitrate X X G E X ASoap Solutions G G G G A ASodium Acetate E G G G A ASodium Bicarbonate (20%) G G E E A ASodium Bisulfate X – – – A ASodium Bisulfite X G – – A ASodium Borate G G G G A ASodium Perborate (10%) G X G G X ASodium Carbonate X G – G A ASodium Chlorate (50%) G G G G X ASodium Cyanide X X – – A ASodium Dichromate G X G G X ASodium Hydroxide (70%) X X G G X ASodium Hydroxide (50%) X X E – X APolypropyleneChemicalSodium Hydroxide (30%) X G E E X ASodium Chloride (30%) X G – – X ASodium Hypochlorite X X – – X ASodium Metaphosphate X X G G X XSodium Nitrate (40%) E G E E A ASodium Perborate (10%) G X G G X ASodium Peroxide (10%) G X G G X ASodium Silicate E G G G A ASodium Sulfate – G – E A ASodium Sulfide (50%) X X – G X ASodium Thiosulphate G X G G A AStannic Chloride X X X X X AStannous Chloride X X X – X XSteam – – – – X –Stearic Acid G F G E A AStoddard’s Solvent G G G G X ASugar Liquors (Cane) E G G G A ASugar Liquors (Beet) E G E E A ASulfate Liquors G X – G X ASulfite Liquors X X G G X XSulfur Chloride X – – – X XSulfur Dioxide (Dry) G G – G X ASulfur Trioxide G G – G X XSulfuric Acid (up to 10%) X G X X X ASulfuric Acid (100%) X X – – X XSulfurous Acid G G X – X ATannic Acid X – G G X ATanning Liquors E – E E X ATartaric Acid – – E E A ATitanium Tetrachloride X X – G X XToluene E E E E A XTetrahydrofuran X – E G A XTomato Juice G – G G X ATrichloroethylene E – – – A XTriethanolamine G X G G A XTriethylamine – – G G A XTrisodium Phosphate (10%) X G E E A ATurpentine G X E E X XUrea (50%) G – G G A AUrine – – E E X AVinegar G X G G X AWater Acid (Mine) X X – – X AWater (Distilled) X G G G A AWater (Sea) G G G G A AWhiskey X G E E X AWhite Liquor (Pulp) G – G G X AWine X G E E X AXylene G G G G A XZinc Chloride X X X G A AZinc Nitrate – – G G X AZinc Sulfate (50%) X G E E X AAll prices and specifications subject to change without notice.AluminumBrass304 Stainless Steel316 Stainless SteelNylonPolypropyleneKCPPL020641

Material SpecificationsAluminum Quick-Acting Couplings from pages 4, 5, 6 and 13BodyHandlesSlot PinsPull RingsGasketsSafety ClipsAluminumAluminum alloy, specially designedfor high tensile strength, lightnessand rigidity.ForgedBrassZinc-platedCarbon SteelZinc-platedCarbon SteelAll sizes except 5" and 8" are made to comply with MIL Spec A-A-59326 for interchangeability.Sizes 5" & 8" comply with ASTM Specifications for interchangeability.1/2" X 1/2" are not specified under MIL Specs.Brass Quick-Acting Couplings from page 12 and 13Buna-NZinc-platedCarbon Steel† All 8" couplers supplied with 4locking handles, safety clips,pull rings and chains at NOBodyHandlesSlot PinsPull RingsGasketsSafety ClipsBrassBrass alloy, specially designed forhigh tensile strength and rigidity.ForgedBrassType 304StainlessSteelAll sizes except 5" are made to comply with MIL Spec A-A-59326 for interchangeability.5" size complies with ASTM F1122 Specifications for interchangeability.1/2" X 1/2" are not specified under MIL Specs.Glass Reinforced Nylon Quick-Acting Couplings from page 14Type 304StainlessSteelBuna-NZinc-platedCarbon SteelBodyHandlesSlot PinsPull RingsGasketsSafety ClipsGlass ReinforcedNylonFiberglass-reinforced Nylon, for hightensile strength, light weight andrigidityType 304LTWStainlessSteelType 304StainlessSteelAll sizes are made to comply with MIL Spec A-A-59326 for interchangeability.Type 304StainlessSteelEPDMType 304StainlessSteelPolypropylene Quick-Acting Couplings from pages 15 and 16BodyHandlesSlot PinsPull RingsGasketsSafety ClipsPolypropylenePolypropylene is glass-filled foradded strength and durabilityType 304InvestmentCastStainlessSteelType 304StainlessSteelType 304StainlessSteelEPDMType 304StainlessSteelAll sizes are made to comply with MIL Spec A-A-59326 for interchangeability.1/2" X 1/2" are not specified under MIL Specs.SS304 Stainless Steel Quick-Acting Couplings from page 9BodyHandlesSlot PinsPull RingsGasketsSafety ClipsStainless SteelStainless Steel Type 304 (ASTMA351 Grade CF-8). Every melt is analyzedfor chemical composition. A ChemicalTest Certificate showing the general compositionis available upon request.Type 304StainlessSteelType 304StainlessSteelType 304StainlessSteelBuna-NType 304StainlessSteelAll sizes except 5" and 8" are made to comply with MIL Spec A-A-59326 for material and interchangeability.Sizes 5" & 8" comply with ASTM Specifications for material and interchangeability.1/2" X 1/2" are not specified under MIL Specs.SS 316 Stainless Steel Quick-Acting Couplings from pages 10, 11 and 13BodyHandlesSlot PinsPull RingsGasketsSafety ClipsAll sizes except 5" and 8" are made to comply with MIL Spec A-A-59326 for material and interchangeability.Sizes 5" & 8" comply with ASTM Specifications for material and interchangeability.1/2" X 1/2" are not specified under MIL Specs.42Stainless SteelStainless Steel Type 316 (ASTMA351 Grade CF-8M). Every melt is analyzedfor chemical composition. A ChemicalTest Certificate showing the general compositionis available upon request.Type 304StainlessSteelType 304StainlessSteelType 304StainlessSteelAll prices and specifications subject to change without notice.Buna-NType 304StainlessSteelKCPPL0309

Operating Pressures & TemperaturesPartAluminum Quick-Acting Couplingsfrom pages 4, 5, 6, 7, and 13PartBrass Quick-Acting Couplingsfrom pages 12 and 13Combination Nipplesfrom page 24PartGlass Reinforced Nylon Couplingsfrom page 14Ground Jointsfrom pages 20 and 21Irri-Loc ® Couplingsfrom page 26PartPartPartMaximum PSI Rating1/2” - 4”: 150 PSI5” - 6”: 75 PSI8”: 50 PSIMaximum PSI Rating1/2” - 4”: 150 PSI5” - 6”: 75 PSIMaximum PSI Rating1/2” - 1 1/2”: 125 PSI2” - 2 1/2”: 75 PSI3” - 4”: 50 PSI5” - 6”: 25 PSIMaximum PSI Rating1”: 175 PSI1/2” - 2”: 150 PSI3”: 125 PSI4”: 75 PSIMaximum PSI RatingSteam - 250 PSIAsphalt & Hot Tar - 200 PSIAir - 600 PSIMaximum PSI Rating2” - 3”: 290 PSI4” - 8”: 174 PSIMaximum TemperatureAmbientMaximum TemperatureAmbientMaximum TemperatureAmbientMaximum TemperatureAmbientMaximum Temperature450ºFMaximum TemperatureAmbientPin Lugsfrom page 22PartMaximum PSI Rating1/2” - 2”: 75 PSI2 1/2” - 4”: 50 PSI5” - 6”: 25 PSIMaximum TemperatureAmbientPartPolypropylene Quick-Acting Couplingsfrom pages 15 and 16PartQuick Disconnect Couplings & Plugsfrom page 20PartSandblast Couplings from page 19Maximum PSI Rating1/2” - 2”: 100 PSI @ 0ºF125 PSI @70ºF,70 PSI @ 150ºF3” - 4”: 75 PSI @ 70ºFMaximum PSI Rating300 PSIMaximum PSI Rating110 PSIMaximum Temperature1/2” - 2”: 100 PSI @ 0ºF125 PSI @70ºF70 PSI @ 150ºF3” - 4”: 75 PSI @ 70ºFMaximum Temperature240ºFMaximum TemperatureAmbientPartSS304 Stainless Steel Quick-ActingCouplings from page 9PartSS316 Stainless Steel Quick-ActingCouplings from pages 10, 11, and 13PartUniversal Couplings from page 18Maximum PSI Rating1/2” - 2”: 250 PSI4”: 150 PSI5” - 6”: 75 PSIMaximum PSI Rating1/2” - 2”: 250 PSI2 1/4” - 4”: 150 PSI5” - 6”: 75 PSIMaximum PSI Rating150 PSIMaximum TemperatureAmbientMaximum TemperatureAmbientMaximum Temperature70ºFAll prices and specifications subject to change without notice.KCPPL110943

Distributed by:Headquarters, Sales Office and Stocking Location360 E. State Parkway, Schaumburg, IL 60173-5335Phone: (847) 755-0360 • Toll-free FAX: (800) 800-0320 • International FAX: (847) 885-0996Web Site: http://www.kuriyama.com • E-Mail: sales@kuriyama.comSOUTHWEST WAREHOUSEKURIYAMA OF AMERICA, INC.HOUSTON8919 MARKET ST.HOUSTON, TX 77029Phone: (713) 674-8212Toll-Free Phone: (800) 501-6808FAX: (713) 674-5214Toll-Free FAX: (800) 800-5214SALES OFFICES — CONTACT THE LOCATION BELOW WHICH SERVES YOUR AREAWESTERN WAREHOUSEKURIYAMA OF AMERICA, INC.SANTA FE SPRINGS10749 SHOEMAKER AVENUESANTA FE SPRINGS, CA 90670-4039Phone: (562) 941-4507FAX: (562) 941-8940Toll-Free FAX: (800) 326-8940SOUTHEAST WAREHOUSEFORTNEY SALES CO., INC.1580 BIG SHANTY DR NWKENNESAW, GA 30144-7040Phone: (770) 427-6528FAX: (770) 423-9249Toll-Free FAX: (800) 423-9249EASTERN WAREHOUSEEASTERN RUBBER &PLASTICS CO., INC.Rt. 537 - PLUMSTED INDUSTRIAL PARKNEW EGYPT, NJ 08533-0248Phone: (609) 758-0100FAX: (609) 758-0102Toll-Free FAX: (800) 445-7138IN MEXICOKuriyama De Mexico, S. de R.L. de C.V. , Carretera Miguel Alemán Km. 14.8, Parque Industrial Hasna, Apodaca (MONTERREY), N.L., 66600, MexicoTel: (81) 1086-1870 o 71 • Toll-Free (within Mexico): 01-800-822-52-00 • FAX: (81) 1086-1869 • Internet: www.kuriyama.com • Correo Electronico: ventas@kuriyama.com© 2009, Kuriyama of America, Inc. 5M 11/09 Printed in U. S. A. KCPPL0808$2.50