TeeJet 854 Operating Manual_98-05051 R1

OEM Program Mode – TeeJet 854 Controller854 Sprayer ControlThe OEM Program Mode contains configuration steps for the console. Theconsole is typically pre-configured before being shipped. Changing these steps isnot recommended, unless instructed to do so, as it may adversely affect theperformance of the controller.To enter the OEM Program Mode:" Begin with console powered off." Press the andPRO keys simultaneously to turn the console off if necessary." Press and hold the + and keys. While holding, press thePRO key 4 times." Release all keys.NUMBER OF BOOM SECTION SWITCHES ON THE CONSOLEIn this step, program the number of individual boom section switches actuallypresent on the control console (regardless of the number of boom sections thatare on the sprayer)." Use the + or keys to modify thevalue." 1 to 11 switches can be programmed." This number determines the “Numberof spray Tips per Boom Section” in theSystem Setup Mode." Press and hold the key for 3seconds to set the value to 1." Press the key once to reset thisvalue to the default value of 5." Press thePRO key to accept the valueand advance to the next program step.N rS e c5PTeeJet VisiFlo color coding only: For other tips see manual7 98-05051R1