Installation Instruction - GEM,Gianni Industries, Inc.
extended embed settings
Electromagnetic Lock Installation Instruction(Indoor Series)Optional BracketBracket installation is according to door swing direction and door frame type ,e. g. narrow frame door , frameless glass door, inswing door , etc.Regular Installation(outswing door)L-bracket for narrowframe (optional)U-bracket for framelessglass door (optional)LZ-bracket for inswingdoor (optional)Regular Installation1TemplateFold the mounting template 90°5Rubber WasherThe rubber washer makes thes u r f a c e o f t h e a r m a t u r e p l a t eadjustable in order to completely fitthe surface of magnetic lock.2Place the template to the properposition of the door and frame. Markthe hole positions of the template onthe door and frame.6Fasten the mounting plate with themounting screws. The position of themounting plate should be adjustable.3Drill the holes according to themarks.7CableFix the mounting plate on the doorwith mounting screws4Armature PlatePlease install the armature plate asillustrated here. (Dimensions of theholes are depending on the doortypes as illustrated below.)8Allen wrenchUse the Allen wrench and fixing boltsto tighten the electromagnetic lock tomounting plate.Hollow Metal DoorReinforced DoorSolid Door9PowerConnect the power and test the unit.OutdoorOutdoorOutdoor36mmOutdoor12.7mm 8mm6.8mm for M8-1.25 thread12.7mm 8mmDrill a Ø8mm hole through Drill a Ø6.8mm holed o o r, o n c l o s i n g s i d e and tap on closing sideenlarge to Ø12.7mm by a a M8x12.5 thread.sexnut blot on the openingside.Recommendation:For Micro EM-locks (300 LBS), maximum thickness of door is 44 mm.For Mini EM-locks (600 LBS), maximum thickness of door is 50 mm.For Midi EM-locks (800 LBS), maximum thickness of door is 48 mm.Drill a Ø8mm hole thrughd o o r o n c l o s i n g s i d eenlarge to Ø 12.7mm, by asexnut blot on the openingside. The depth is 36mm.For Maxi EM-locks (1200 LBS), maximum thickness of door is 46 mm.Copyright © Gianni Industries, Inc. All rights reserved.P-MU-AM-EM Ver. I Published on: 2011.04.07
Magazine: Installation Instruction - GEM,Gianni Industries, Inc.