Interface Drawings - MicroE Systems

microesys.com

Interface Drawings - MicroE Systems

8 7 6 5 4 3 21THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF MicroE Systems Corp. AND SHALLNOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALEOF APPARATUS WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM MicroE Systems Corp.6.DIRECTION "A"CREVISIONSLTR ECODESCRIPTION DATE APPROVEDA RELEASE TO PRODUCTION7/16/10 S. B.B 2357 ADD MII 1600 PIN FUNCTION TABLE. ADD MARKER TAPE SCALE & NOTES.REMOVE LIMIT MARKERS & UPDATE TAPESCALE INDEX MARKERS/MEASURINGLENGTH & NOTES. REMOVE FIGURES 1, 2, 3 & INSTALLATION NOTES (PREVIOUSLYON PAGE 4). CHANGE DRAWING DESCRIPTION. ID-00376 REPLACES ID-00375.6/27/11 S. B.C 2514 FIXED TOLERANCE ERROR ON MOUNTING PLATE RECOMMENDATION,11/30/12 VB9.00±.08 WAS ±.80. REVISED VIEWS. SEE ECOD8.30MARKER REGION5. DCC1ADMAIN TRACK6.006.75BTAPE SCALE SHOWN IN THIS VIEW TRANSLATED IN X-AXISOUT OF OPERATING RANGE FOR CLARITYB27.002.503.84C22.862.62 4X R2.79AB2B16.73.842.03C9.00±0.0814.25SENSOR MOUNTING SURFACETAPE SCALE MOUNTING SURFACEB2.072X 2-56 OR M2.5THRU27.00±0.08SENSOR MOUNTING PLATE RECOMMENDATION3.38METAL TAPE SCALEADHESIVE BACKING4X R2.394X R0.76OPTICAL C L27.002.500.2913.702.24BBNOTES:9.0013.49A1. RECOMMENDED MOUNTING HARDWARE:2-56 OR M2.5 SOCKET HEAD CAP SCREWS.2. IF BENCHING PINS ARE TO BE USED, PINS MUST BE PLACED ALONG DATUM EDGES OFSENSOR FOR PROPER ALIGNMENT (REFERENCE DATUMS B1, B2 AND C1).3. HEIGHT OF SENSOR BENCHING PINS MUST BE A MINIMUM OF 4.06 mm FROM DATUM A.4. RECOMMENDED SENSOR MOUNTING PLATE THICKNESS:MINIMUM: 4 SCREW THREADS.MAXIMUM: ALLOW FOR CLEARANCE TO SCALE AND SCALE MOUNTING HARDWARE(BENCHING SURFACE, TRENCHES, ETC).5. SEE SHEETS 3 AND 4 FOR DIMENSIONS AND LOCATIONS OF MARKERS.6. WHEN SCALE MOVES IN DIRECTION "A" WITH RESPECT TO A STATIONARY SENSOR, OUTPUTSIGNAL A+/SIN+ (PIN 14/PIN 9) LEADS OUTPUT SIGNAL B+/COS+ (PIN 13/PIN10).87652X2.79 THRU4UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN MILLIMETERSDIM. APPLY AFTER PROCESSINGINTERPRET ALL GEOMETRIC TOLS.PER ANSI Y14.5M-1994TOLERANCES ARE:DECIMALS: ANGULAR:.X .2530 MIN..XX .13321.5932.00APPROVALS4.95DATEDRAWNV. BUCK 6/03/10CHECKEDENGRG.A.GOLDMAN 7/13/10MFG ENGD.McLOUGHLIN 7/15/10QAA.VILLARROEL 7/15/10SUBJECT TO CHANGE WITHOUT NOTIFICATIONC2DESCRIPTION:SIZEBINTERFACE, ENCODER, 20 umTAPE/MARKER TAPE SCALES,MERCURY II 1600/1900 SENSORDWG. NO.SCALE: CAD FILE:ID-00376UNITS: mmMicroE SystemsDivision of GSI Group125 Middlesex Tpk.Bedford, MA 017301REV.C3rd ANGLEPROJECTION SHEET 1 OF 4A


8 7 6 5 4 3 2 1THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF MicroE Systems Corp. AND SHALLNOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALEOF APPARATUS WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM MicroE Systems Corp.52.0DPIN 9PIN1CABLE LENGTH+.013M/-0.0D6.439.23.6 CABLEDIAMETER5.3CPIN 15PIN 8CSEE TABLE 2 AND 3 FORPIN FUNCTIONSIDENTIFICATION LABELMODEL#, SENSOR P/N,SERIAL#15.73.8BBATABLE 2.Mercury II 1600 15-PlugPin Wire color Function1 - Do Not Connect2 Black GND3 - Do Not Connect4 Brown IW-5 Blue B-6 Yellow A-7 Red 5V8 Red 5V9 Black GND10 White COS+11 Gray SIN+12 Orange IW+13 Violet B+14 Green A+15 - Do Not Connect8TABLE 3.Mercury II 1900 15-PlugPin Wire color Function1 Yellow SIN-2 Blue COS-3 Orange IW+4 Red 5V5 Red 5V6 - Do Not Connect7 - Do Not Connect8 - Do Not Connect9 Green SIN+10 Violet COS+11 Brown IW-12 Black GND13 Black GND14 - Do Not Connect15 - Do Not Connect76NOTE: GND AND INNER SHIELD ARE INTERNALLY CONNECTED.543TABLE 1.Cable Lengths1 Meter3 Meter5 MeterCustom2DESCRIPTION:SIZEBSCALE:DWG. NO.ID-00376UNITS: mmAMicroE SystemsDivision of GSI Group125 Middlesex Tpk.Bedford, MA 01730INTERFACE, ENCODER, 20 umTAPE/MARKER TAPE SCALES,MERCURY II 1600/1900 SENSOR1REV.C3rd ANGLEPROJECTION SHEET 2 OF 4

More magazines by this user
Similar magazines