User manual 09/2009 - Schneider Electric

schneider.electric.dk

User manual 09/2009 - Schneider Electric

The RSU Parameter Setting SoftwareProtection parameter settingPresentationThe protection parameter settings can be accessed using the RSU software under the(default tab):tabProtection parameter settingThe RSU software screen is exactly the same as the front face of the trip units: the setting and navigationprinciples are identical to those described in the Readout Mode, page 20 and Setting Mode, page 24chapters.NOTE: Access to the settings is only possible when the padlock is unlocked (for more information onunlocking the padlock, see Navigation Principle, page 18).NOTE: The 2 additional protections on the Micrologic 6 E-M trip unit (Under load and Long start) can onlybe set using the RSU software.Presetting the Protection Parameters by a DialWhen a protection parameter is preset by a dial, the dial on the Micrologic trip unit and the virtual dial inthe RSU software have to be in an identical position.LV434104 09/2009 121

More magazines by this user
Similar magazines