User manual 09/2009 - Schneider Electric

schneider.electric.dk

User manual 09/2009 - Schneider Electric

Operating AssistanceMain MenuPresentationThe Main menu offers 5 menus containing the information required for monitoring and using the ULPsystem intelligent functional units. The description and content of the menus is set out for the CompactNSX circuit breakers.The 5 menus offered in the Main menu are as follows:MenuDescriptionQuick View menuThe Quick View menu provides quick access to the information essential foroperation.Metering menuThe Metering menu displays the data made available by the Micrologic trip unit:• Current, voltage, power, energy and harmonic distortion measurements• Minimum and maximum measurement valuesCommand menuThe Command menu controls a circuit breaker from the FDM121 display modulewhich is equipped with a motorized communicating remote control.The proposed commands are:• circuit breaker opening• circuit breaker closing• circuit breaker reset after tripping.Alarms menuThe Alarms menu displays the alarm history of the last 40 alarms detected by theMicrologic trip unit since the last power up (see Detailed Tables of Alarms, page 110and Alarms on a Trip, Failure and Maintenance Event, page 109).Services menuThe Services menu contains all the FDM121 display module set-up functions and theoperating assistance information:• Reset (peak demand values, energy meters)• Set-up (display module)• Maintenance (operation counters, load profile, etc.)• Product version: Identification of the intelligent functional unit modules• LanguageFor more information on the FDM121 display module menus, refer to the ULP system - User manual.NavigationNavigation within the Main menu is as follows:• The and keys are used to select one of the 5 menus.• The OK key is used to confirm the selection.• The ESC key has no effect.LV434104 09/2009 145

More magazines by this user
Similar magazines