User manual 09/2009 - Schneider Electric

schneider.electric.dk

User manual 09/2009 - Schneider Electric

Using Micrologic Trip UnitsMicrologic 6 LSIG: Protection Parameter Setting ScreensMode Description of Screens Unit Up/Down ArrowsIr: Long time protection pick-up setting for the phasesPreset by a dialAThe up arrow indicatesthe Ir parameter.The down arrowsindicate the 3 phases.tr: Long time protection time delay setting s The up arrow indicatesthe tr parameter.Isd: Short time protection pick-up setting for the phases Isd/Ir The up arrow indicatesthe Isd parameter.The down arrowsindicate the 3 phases.tsd: Short time protection time delay settingActivation of the I 2 t inverse time curve short timeprotection• ON: I 2 t inverse time curve active• OFF: I 2 t inverse time curve not activeIN: protection pick-up setting for the neutral (4-pole or 3-pole trip unit with ENCT option and active neutralprotection)Ii: Instantaneous protection pick-up value for the phasesand the neutral (4-pole or 3-pole trip unit with ENCToption and active neutral protection).Ig: Ground fault protection pick-up settingPreset by a dialtg: Ground fault protection time delay settingActivation of the I 2 t inverse time curve ground faultprotection• ON: I 2 t inverse time curve active• OFF: I 2 t inverse time curve not activeActivation of neutral declaration (3-pole trip unit withENCT option)• N: Neutral protection active• noN: Neutral protection not activesIN/IrIi/InIg/Ins— —The up arrow indicatesthe tsd parameter.The down arrowindicates the neutral.The up arrow indicatesthe Ii parameter.The down arrowsindicate the 3 phases.The up arrow indicatesthe Ig parameter.The down arrowsindicate the 3 phases.The up arrow indicatesthe tg parameter.32 LV434104 09/2009

More magazines by this user
Similar magazines