DMX and DMH

Technical dataDMX and DMHSuction lift, DMX model 226PumpModelContinuous operation1)[m]Liquids with a viscosity similar to waterSuctíon lift - 50 HzStart-up 2)[m]1) Suction line and dosing head filled (continuous operation).2) Suction line and dosing head not filled, but dosing head and valvesmoistened (commissioning).Max. length of suctionline[m]Liquids with max. permissible viscosityMax. permissibleviscosity[mPa s]Suction lift[m]DMX 24-8 226 3 1 4 1000 1DMX 37-5 226 3 1 3 600 1DMX 52-8 226 3 1 4 700 1DMX 60-3 226 2 1 3 500 1DMX 67-10 226 3 1 4 700 1DMX 82-5 226 3 1 3 500 1DMX 95-8 226 3 1 3 500 1DMX 100-8 226 3 1 4 400 1DMX 130-3 226 2 1 3 400 0DMX 132-10 226 3 1 4 400 1DMX 142-8 226 3 1 4 200 0DMX 152-6 226 2 1 3 400 0DMX 160-5 226 3 1 3 200 0DMX 190-8/10 226 3 1 4 200 0DMX 199-8 226 3 1 3 200 0DMX 230-5 226 3 1 3 150 0DMX 249-3 226 1.5 1 2 100 0DMX 255-3 226 2 1 3 100 0DMX 280-6/8 226 3 1 3 150 0DMX 315-3 226 1.5 1 2 100 0DMX 321-4/6 226 2 1 3 100 0DMX 380-3 226 2 1 3 50 0DMX 460-3.5/6 226 2 1 3 50 0DMX 525-3 226 1 0.5 2 50 0DMX 765-3 226 0 0 2 10 0The values in the table above are based on the followingconditions:Liquids with a viscosity similar to water:• counter pressure: 1.5 to 3 bar• non-degassing and non-abrasive liquids• temperature: 20°C• stroke length: 100%• standard pump version.Liquids with max. permissible viscosity:• newtonian liquids• non-degassing and non-abrasive liquids• temperature: 20°C• standard pump version.40