Chemwatch MSDS Print - FUJIFILM Australia

products.fujifilm.com.au

Chemwatch MSDS Print - FUJIFILM Australia

Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 1 of 12Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONPRODUCT NAMEFujifilm FJ MC-E Plate Multicleaner 1LPROPER SHIPPING NAMEPETROLEUM DISTILLATES, N.O.S. or PETROLEUM PRODUCTS, N.O.S.(contains naphtha petroleum, light aromatic solvent)PRODUCT NUMBERS15599953PRODUCT USEWashing fluid for offset printing machines.SUPPLIERCompany: FUJIFILM Australia Pty LtdAddress:114 Old Pittwater RoadBrookvaleNSW, 2100AustraliaTelephone: +61 2 9466 2600Emergency Tel:+61 1800 039 008Emergency Tel:+61 3 9573 3112Fax: +61 2 9938 1975Section 2 - HAZARDS IDENTIFICATIONSTATEMENT OF HAZARDOUS NATUREHAZARDOUS SUBSTANCE. DANGEROUS GOODS. According to the Criteria of NOHSC, and the ADG Code.CHEMWATCH HAZARD RATINGSFlammabilityToxicityBody ContactReactivityChronicSCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4RISK■ Flammable.■ Irritating to respiratory system.■ May cause SENSITISATION by skin contact.■ Toxic to aquatic organisms, may cause longtermadverse effects in the aquaticenvironment.■ HARMFUL- May cause lung damage if swallowed.SAFETY• Do not breathe gas/fumes/vapour/spray.• Avoid contact with skin.• Avoid contact with eyes.• Wear suitable protective clothing.• Wear suitable gloves.continued...


Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 2 of 12Section 2 - HAZARDS IDENTIFICATION■ Repeated exposure may cause skin dryness andcracking.■ Vapours may cause drowsiness and dizziness.• Wear eye/face protection.• Do not empty into drains.• To clean the floor and all objects contaminatedby this material, use water and detergent.• This material and its container must be disposedof in a safe way.• Keep away from food, drink and animal feedingstuffs.• In case of contact with eyes, rinse with plentyof water and contact Doctor or Poisons InformationCentre.• If swallowed, IMMEDIATELY contact Doctor orPoisons Information Centre. (show this containeror label).• Use appropriate container to avoid environmentalcontamination.• Avoid release to the environment. Refer tospecial instructions/Safety data sheets.• This material and its container must be disposedof as hazardous waste.Section 3 - COMPOSITION / INFORMATION ON INGREDIENTSNAME CAS RN %naphtha petroleum, light aromatic solvent 64742-95-6. 10-201, 2, 4- trimethyl benzene 95-63-6 5-10solvent naphtha petroleum, heavy aromatic 64742-94-5 1-51, 3, 5- trimethyl benzene 108-67-8 1-5isopropyl benzene - cumene 98-82-8 0.1-1naphthalene 91-20-3 0.1-15- chloro- 2- methyl- 4- isothiazolin- 3- one 26172-55-4


Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 3 of 12Section 4 - FIRST AID MEASURES• Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aidprocedures.• Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocketmask as trained. Perform CPR if necessary.NOTES TO PHYSICIAN■ Any material aspirated during vomiting may produce lung injury. Therefore emesis should not be induced mechanically orpharmacologically.For acute or short term repeated exposures to petroleum distillates or related hydrocarbons:• Primary threat to life, from pure petroleum distillate ingestion and/or inhalation, is respiratory failure.• Patients should be quickly evaluated for signs of respiratory distress (e.g. cyanosis, tachypnoea, intercostal retraction,obtundation) and given oxygen. Patients with inadequate tidal volumes or poor arterial blood gases (pO2 50 mm Hg) should beintubated.• Arrhythmias complicate some hydrocarbon ingestion and/or inhalation and electrocardiographic evidence of myocardial injury hasbeen reported; intravenous lines and cardiac monitors should be established in obviously symptomatic patients. The lungsexcrete inhaled solvents, so that hyperventilation improves clearance.• A chest x-ray should be taken immediately after stabilisation of breathing and circulation to document aspiration and detectthe presence of pneumothorax.for naphthalene intoxication: Naphthalene requires hepatic and microsomal activation prior to the production of toxic effects.Liver microsomes catalyse the initial synthesis of the reactive 1,2-epoxide intermediate which is subsequently oxidised tonaphthalene dihydrodiol and alpha-naphthol.• Induce emesis and/or perform gastric lavage with large amounts of warm water where oral poisoning is suspected.Section 5 - FIRE FIGHTING MEASURESEXTINGUISHING MEDIA• Foam.• Dry chemical powder.• BCF (where regulations permit).• Carbon dioxide.FIRE FIGHTING• Alert Fire Brigade and tell them location and nature of hazard.• May be violently or explosively reactive.• Wear breathing apparatus plus protective gloves.• Prevent, by any means available, spillage from entering drains or water course.FIRE/EXPLOSION HAZARD• Liquid and vapour are flammable.• Moderate fire hazard when exposed to heat or flame.• Vapour forms an explosive mixture with air.• Moderate explosion hazard when exposed to heat or flame.Combustion products include: carbon monoxide (CO), carbon dioxide (CO2), other pyrolysis products typical of burning organicmaterial.May emit clouds of acrid smoke.FIRE INCOMPATIBILITY• Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition mayresult.HAZCHEM3YSection 6 - ACCIDENTAL RELEASE MEASURESMINOR SPILLS• Remove all ignition sources.• Clean up all spills immediately.• Avoid breathing vapours and contact with skin and eyes.• Control personal contact with the substance, by using protective equipment.MAJOR SPILLS• Clear area of personnel and move upwind.• Alert Fire Brigade and tell them location and nature of hazard.• May be violently or explosively reactive.continued...


Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 4 of 12Section 6 - ACCIDENTAL RELEASE MEASURES• Wear breathing apparatus plus protective gloves.Personal Protective Equipment advice is contained in Section 8 of the MSDS.Section 7 - HANDLING AND STORAGEPROCEDURE FOR HANDLING• Containers, even those that have been emptied, may contain explosive vapours.• Do NOT cut, drill, grind, weld or perform similar operations on or near containers.• DO NOT allow clothing wet with material to stay in contact with skin.• Electrostatic discharge may be generated during pumping - this may result in fire.• Ensure electrical continuity by bonding and grounding (earthing) all equipment.• Restrict line velocity during pumping in order to avoid generation of electrostatic discharge (


Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 5 of 12Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTIONSource Material TWA TWA STEL STEL Peak Peak TWA Notesppm mg/m³ ppm mg/m³ ppm mg/m³ F/CC__________ __________ ______ ______ ______ ______ ______ ______ ______ ______Australia (Naphthalene) 10 52 15 79ExposureStandardsThe following materials had no OELs on our records• 1, 2, 4- trimethyl benzene: CAS:95- 63- 6• 1, 3, 5- trimethyl benzene: CAS:108- 67- 8• 5- chloro- 2- methyl- 4- isothiazolin- 3- one: CAS:26172- 55- 4• 2- methyl- 4- isothiazolin- 3- one: CAS:2682- 20- 4MATERIAL DATA2-METHYL-4-ISOTHIAZOLIN-3-ONE:5-CHLORO-2-METHYL-4-ISOTHIAZOLIN-3-ONE:NAPHTHA PETROLEUM, LIGHT AROMATIC SOLVENT:NAPHTHALENE:SOLVENT NAPHTHA PETROLEUM, HEAVY AROMATIC:■ Sensory irritants are chemicals that produce temporary and undesirable side-effects on the eyes, nose or throat.Historically occupational exposure standards for these irritants have been based on observation of workers' responses to variousairborne concentrations.1,2,4-TRIMETHYL BENZENE:1,3,5-TRIMETHYL BENZENE:FUJIFILM FJ MC-E PLATE MULTICLEANER 1L:■ For trimethyl benzene as mixed isomers (of unstated proportions)Odour Threshold Value: 2.4 ppm (detection)Use care in interpreting effects as a single isomer or other isomer mix. Trimethylbenzene is an eye, nose and respiratoryirritant.FUJIFILM FJ MC-E PLATE MULTICLEANER 1L:ISOPROPYL BENZENE - CUMENE:■ For cumene:Odour Threshold Value: 0.008-0.132 ppm (detection), 0.047 ppm (recognition)Exposure at or below the TLV-TWA is thought to prevent induction of narcosis.NAPHTHA PETROLEUM, LIGHT AROMATIC SOLVENT:SOLVENT NAPHTHA PETROLEUM, HEAVY AROMATIC:■ Odour threshold: 0.25 ppm.The TLV-TWA is protective against ocular and upper respiratory tract irritation and is recommended for bulk handling ofgasoline based on calculations of hydrocarbon content of gasoline vapour.2-METHYL-4-ISOTHIAZOLIN-3-ONE:5-CHLORO-2-METHYL-4-ISOTHIAZOLIN-3-ONE:■ CEL TWA: 0.1 mg/m3; STEL 0.3 mg/m3 total isothiazolinones (Rohm and Haas).NAPHTHA PETROLEUM, LIGHT AROMATIC SOLVENT:REL TWA: 25-100 ppm*, 125 mg/m3*CEL TWA: 50 ppm, 125 mg/m3[Various Manufacturers]SOLVENT NAPHTHA PETROLEUM, HEAVY AROMATIC:REL TWA: 100 ppm [Manufacturer]CEL TWA: 100 ppm, 550 mg/m3NAPHTHALENE:■ Exposed individuals are reasonably expected to be warned, by smell, that the Exposure Standard is being exceeded.Odour Safety Factor (OSF) is determined to fall into either Class A or B.The Odour Safety Factor (OSF) is defined as:OSF= Exposure Standard (TWA) ppm/ Odour Threshold Value (OTV) ppmClassification into classes follows:Class OSF Descriptioncontinued...


Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 6 of 12Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTIONA 550 Over 90% of exposed individualsare aware by smell that theExposure Standard (TLV- TWA forexample) is being reached, evenwhen distracted by workingactivitiesB 26- 550 As " A" for 50- 90% of personsbeing distractedC 1- 26 As " A" for less than 50% ofpersons being distractedD 0.18- 1 10- 50% of persons aware ofbeing tested perceive by smellthat the Exposure Standard isbeing reachedE


Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 7 of 12Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION• Eyewash unit.• Some plastic personal protective equipment (PPE) (e.g. gloves, aprons, overshoes) are not recommended as they may producestatic electricity.• For large scale or continuous use wear tight-weave non-static clothing (no metallic fasteners, cuffs or pockets), non sparkingsafety footwear.ENGINEERING CONTROLS■ Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designedengineering controls can be highly effective in protecting workers and will typically be independent of worker interactions toprovide this high level of protection.The basic types of engineering controls are:Process controls which involve changing the way a job activity or process is done to reduce the risk.Enclosure and/or isolation of emission source which keeps a selected hazard "physically" away from the worker and ventilationthat strategically "adds" and "removes" air in the work environment.Section 9 - PHYSICAL AND CHEMICAL PROPERTIESAPPEARANCEWhite acidic flammable liquid with a typical odour; emulsifiable in water.PHYSICAL PROPERTIESLiquid.State Liquid Molecular Weight Not ApplicableMelting Range (°C) Not Available Viscosity Not AvailableBoiling Range (°C) Not Available Solubility in water (g/L) Partly MiscibleFlash Point (°C) 44 pH (1% solution) Not AvailableDecomposition Temp (°C) Not Available pH (as supplied) 2.35Autoignition Temp (°C) Not Available Vapour Pressure (kPa) Not AvailableUpper Explosive Limit (%) Not Available Specific Gravity (water=1) 1.04Lower Explosive Limit (%) Not Available Relative Vapour Density Not Available(air=1)Volatile Component (%vol) Not Available Evaporation Rate Not Available1, 2, 4- trimethyl benzenelog Kow (Sangster 1997): 3.7isopropyl benzene - cumenelog Kow (Sangster 1997): 3.66naphthalenelog Kow (Prager 1995): 3.01- 3.59log Kow (Sangster 1997): 3.35Section 10 - STABILITY AND REACTIVITYCONDITIONS CONTRIBUTING TO INSTABILITY• Presence of incompatible materials.• Product is considered stable.• Hazardous polymerisation will not occur.For incompatible materials - refer to Section 7 - Handling and Storage.Section 11 - TOXICOLOGICAL INFORMATIONPOTENTIAL HEALTH EFFECTSACUTE HEALTH EFFECTSSWALLOWED■ Swallowing of the liquid may cause aspiration into the lungs with the risk of chemical pneumonitis; serious consequences mayresult. (ICSC13733).Ingestion of petroleum hydrocarbons can irritate the pharynx, oesophagus, stomach and small intestine, and cause swellings andulcers of the mucous. Symptoms include a burning mouth and throat; larger amounts can cause nausea and vomiting, narcosis,weakness, dizziness, slow and shallow breathing, abdominal swelling, unconsciousness and convulsions. Damage to the heart musclecontinued...


Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 8 of 12Section 11 - TOXICOLOGICAL INFORMATIONcan produce heart beat irregularities, ventricular fibrillation (fatal) and ECG changes. The central nervous system can bedepressed. Light species can cause a sharp tingling of the tongue and cause loss of sensation there. Aspiration can cause cough,gagging, pneumonia with swelling and bleeding.Ingestion of naphthalene and related compounds may produce abdominal cramps with nausea, vomiting, diarrhoea, headache, profusesweating, listlessness, confusion, and in severe poisonings, coma with or without convulsions. Irritation of the bladder may alsooccur, producing urgency, painful urination, and the passage of brown or black urine with or without albumin or casts. Severenaphthalene can result in haemoglobin appearing in the urine, methaemoglobinaemia, which causes oxygen starvation, and death.Methaemoglobinaemia is characterised by cyanosis (a bluish discolouration of skin and mucous membranes) and breathingdifficulties. Symptoms may not occur until several hours after exposure. Survivors may develop life-threatening kidney failure.The acute lethal dose of naphthalene is estimated at 5-15 grams, but some susceptible individuals have died following ingestionof only 2 grams total. Some people (especially Asians, Arabs, Latin Caucasians and American and African blacks) may beparticularly susceptible, especially males.EYE■ There is some evidence to suggest that this material can cause eye irritation and damage in some persons.Long term exposure to naphthalene has produced clouding of the lens (cataracts) in workers.Direct eye contact with petroleum hydrocarbons can be painful, and the corneal epithelium may be temporarily damaged. Aromaticspecies can cause irritation and excessive tear secretion.SKIN■ Repeated exposure may cause skin cracking, flaking or drying following normal handling and use.There is some evidence to suggest that this material can cause inflammation of the skin on contact in some persons.Workers sensitised to naphthalene and related compounds show an inflammation of the skin with scaling and reddening. Someindividuals show an allergic reaction. Generally, absorption through the skin does not cause acute systemic reactions except innew-born babies. Photosensitisation, sunburn-like responses or blisters have been reported. Animal testing revealed naphthalenecan cause disease changes in a range of organs.The material may accentuate any pre-existing dermatitis condition.Entry into the blood-stream, through, for example, cuts, abrasions or lesions, may produce systemic injury with harmful effects.Examine the skin prior to the use of the material and ensure that any external damage is suitably protected.INHALED■ The material can cause respiratory irritation in some persons. The body's response to such irritation can cause further lungdamage.Inhalation of vapours may cause drowsiness and dizziness. This may be accompanied by sleepiness, reduced alertness, loss ofreflexes, lack of co-ordination, and vertigo.The acute toxicity of inhaled alkylbenzenes is best described by central nervous system depression. As a rule, these compoundsmay also act as general anaesthetics.


Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 9 of 12Section 11 - TOXICOLOGICAL INFORMATIONpsychiatric disorders as well as damage the liver and kidneys.Animal testing indicates that inhalation of naphthalene may increase the incidence of respiratory tumours and may aggravatechronic inflammation.TOXICITY AND IRRITATION■ Contact allergies quickly manifest themselves as contact eczema, more rarely as urticaria or Quincke's oedema. The pathogenesisof contact eczema involves a cell-mediated (T lymphocytes) immune reaction of the delayed type. Other allergic skin reactions,e.g. contact urticaria, involve antibody-mediated immune reactions. The significance of the contact allergen is not simplydetermined by its sensitisation potential: the distribution of the substance and the opportunities for contact with it areequally important. A weakly sensitising substance which is widely distributed can be a more important allergen than one withstronger sensitising potential with which few individuals come into contact. From a clinical point of view, substances arenoteworthy if they produce an allergic test reaction in more than 1% of the persons tested.Asthma-like symptoms may continue for months or even years after exposure to the material ceases. This may be due to a nonallergeniccondition known as reactive airways dysfunction syndrome (RADS) which can occur following exposure to high levels ofhighly irritating compound.For trimethylbenzenes:Absorption of 1,2,4-trimethylbenzene occurs after oral, inhalation, or dermal exposure. Occupationally, inhalation and dermalexposures are the most important routes of absorption although systemic intoxication from dermal absorption is not likely tooccur due to the dermal irritation caused by the chemical prompting quick removal.CARCINOGENCumene International Agency for Group 2BResearch on Cancer (IARC) -Agents Reviewed by the IARCMonographsNaphthalene International Agency for Group 2BResearch on Cancer (IARC) -Agents Reviewed by the IARCMonographsSKINisopropyl benzene - Australia Exposure Notes SkcumeneStandards - SkinSection 12 - ECOLOGICAL INFORMATIONToxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.This material and its container must be disposed of as hazardous waste.Avoid release to the environment.Refer to special instructions/ safety data sheets.EcotoxicityIngredient Persistence: Persistence: Air Bioaccumulation MobilityWater/Soilnaphtha petroleum, light No Data No Dataaromatic solvent Available Available1, 2, 4- trimethyl benzene LOW LOW LOW MEDsolvent naphtha petroleum, heavy No Data No Dataaromatic Available Available1, 3, 5- trimethyl benzene HIGH No Data LOW MEDAvailableisopropyl benzene - cumene HIGH No Data LOW MEDAvailablenaphthalene LOW LOW LOW MED5- chloro- 2- methyl- 4- HIGH No Data LOW HIGHisothiazolin- 3- oneAvailable2- methyl- 4- isothiazolin- 3- HIGH No Data LOW HIGHoneAvailablecontinued...


Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 10 of 12Section 13 - DISPOSAL CONSIDERATIONS• Containers may still present a chemical hazard/ danger when empty.• Return to supplier for reuse/ recycling if possible.Otherwise:• If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used tostore the same product, then puncture containers, to prevent re-use, and bury at an authorised landfill.• Where possible retain label warnings and MSDS and observe all notices pertaining to the product.Legislation addressing waste disposal requirements may differ by country, state and/ or territory. Each user must refer to lawsoperating in their area.A Hierarchy of Controls seems to be common - the user should investigate:• Reduction.• DO NOT allow wash water from cleaning or process equipment to enter drains.• It may be necessary to collect all wash water for treatment before disposal.• In all cases disposal to sewer may be subject to local laws and regulations and these should be considered first.• Where in doubt contact the responsible authority.• Recycle wherever possible.• Consult manufacturer for recycling options or consult local or regional waste management authority for disposal if no suitabletreatment or disposal facility can be identified.• Dispose of by: burial in a land-fill specifically licenced to accept chemical and / or pharmaceutical wastes or Incineration ina licenced apparatus (after admixture with suitable combustible material).• Decontaminate empty containers. Observe all label safeguards until containers are cleaned and destroyed.Section 14 - TRANSPORTATION INFORMATIONLabels Required: FLAMMABLE LIQUIDHAZCHEM:3Y (ADG7)Land Transport UNDG:Class or division: 3 Subsidiary risk: NoneUN No.: 1268 UN packing group: IIIShipping Name:PETROLEUM DISTILLATES, N.O.S. or PETROLEUM PRODUCTS,N.O.S. (contains naphtha petroleum, light aromatic solvent)Air Transport IATA:ICAO/IATA Class: 3 ICAO/IATA Subrisk: NoneUN/ID Number: 1268 Packing Group: IIISpecial provisions:A3Cargo OnlyPacking Instructions: 366 Maximum Qty/Pack: 220 LPassenger and CargoPassenger and CargoPacking Instructions: 355 Maximum Qty/Pack: 60 LPassenger and Cargo Limited QuantityPassenger and Cargo Limited QuantityPacking Instructions: Y344 Maximum Qty/Pack: 10 LShipping name:PETROLEUM DISTILLATES, N.O.S. or PETROLEUM PRODUCTS, N.O.S.(contains naphtha petroleum, light aromatic solvent)Maritime Transport IMDG:IMDG Class: 3 IMDG Subrisk: NoneUN Number: 1268 Packing Group: IIIEMS Number: F-E,S-E Special provisions: 223 955Limited Quantities: 5 L Marine Pollutant: YesShipping name:PETROLEUM DISTILLATES, N.O.S. or PETROLEUM PRODUCTS, N.O.S.(contains naphtha petroleum, light aromatic solvent)continued...


Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 11 of 12Section 15 - REGULATORY INFORMATIONPOISONS SCHEDULES5REGULATIONSRegulations for ingredientsnaphtha petroleum, light aromatic solvent (CAS: 64742-95-6) is found on the followingregulatory lists;"Australia Exposure Standards", "Australia Hazardous Substances", "Australia High Volume Industrial Chemical List (HVICL)","Australia Inventory of Chemical Substances (AICS)", "Australia Standard for the Uniform Scheduling of Medicines and Poisons(SUSMP) - Appendix E (Part 2)", "Australia Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Schedule 5","GESAMP/EHS Composite List - GESAMP Hazard Profiles", "IMO IBC Code Chapter 17: Summary of minimum requirements", "IMOProvisional Categorization of Liquid Substances - List 3: (Trade-named) mixtures containing at least 99% by weight of componentsalready assessed by IMO, presenting safety hazards", "International Agency for Research on Cancer (IARC) - Agents Reviewed bythe IARC Monographs", "International Council of Chemical Associations (ICCA) - High Production Volume List", "InternationalFragrance Association (IFRA) Survey: Transparency List", "International Maritime Dangerous Goods Requirements (IMDG Code) -Substance Index", "OECD List of High Production Volume (HPV) Chemicals", "OSPAR List of Chemicals for Priority Action", "OSPARNational List of Candidates for Substitution – Norway"1, 2, 4-trimethyl benzene (CAS: 95-63-6) is found on the following regulatory lists;"Australia Hazardous Substances", "Australia Inventory of Chemical Substances (AICS)", "Australia National Pollutant Inventory","Australia Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Schedule 7", "GESAMP/EHS Composite List -GESAMP Hazard Profiles", "IMO IBC Code Chapter 17: Summary of minimum requirements", "IMO MARPOL 73/78 (Annex II) - List ofNoxious Liquid Substances Carried in Bulk", "IMO Provisional Categorization of Liquid Substances - List 2: Pollutant onlymixtures containing at least 99% by weight of components already assessed by IMO", "International Council of ChemicalAssociations (ICCA) - High Production Volume List", "International Fragrance Association (IFRA) Survey: Transparency List", "OECDList of High Production Volume (HPV) Chemicals", "OSPAR List of Chemicals for Priority Action", "OSPAR National List ofCandidates for Substitution – United Kingdom"solvent naphtha petroleum, heavy aromatic (CAS: 64742-94-5) is found on the followingregulatory lists;"Australia - Victoria Occupational Health and Safety Regulations - Schedule 9: Materials at Major Hazard Facilities (And TheirThreshold Quantity) Table 2", "Australia Exposure Standards", "Australia Hazardous Substances", "Australia High Volume IndustrialChemical List (HVICL)", "Australia Inventory of Chemical Substances (AICS)", "Australia Standard for the Uniform Scheduling ofMedicines and Poisons (SUSMP) - Appendix E (Part 2)", "Australia Standard for the Uniform Scheduling of Medicines and Poisons(SUSMP) - Schedule 5", "GESAMP/EHS Composite List - GESAMP Hazard Profiles", "IMO IBC Code Chapter 17: Summary of minimumrequirements", "IMO Provisional Categorization of Liquid Substances - List 3: (Trade-named) mixtures containing at least 99% byweight of components already assessed by IMO, presenting safety hazards", "International Agency for Research on Cancer (IARC) -Agents Reviewed by the IARC Monographs", "International Council of Chemical Associations (ICCA) - High Production Volume List","International Fragrance Association (IFRA) Survey: Transparency List", "International Maritime Dangerous Goods Requirements(IMDG Code) - Substance Index", "OECD List of High Production Volume (HPV) Chemicals", "OSPAR List of Chemicals for PriorityAction", "OSPAR National List of Candidates for Substitution – Norway"1, 3, 5-trimethyl benzene (CAS: 108-67-8) is found on the following regulatory lists;"Australia Hazardous Substances", "Australia Inventory of Chemical Substances (AICS)", "Australia National Pollutant Inventory","Australia Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Schedule 7", "GESAMP/EHS Composite List -GESAMP Hazard Profiles", "IMO IBC Code Chapter 17: Summary of minimum requirements", "IMO MARPOL 73/78 (Annex II) - List ofNoxious Liquid Substances Carried in Bulk", "IMO Provisional Categorization of Liquid Substances - List 2: Pollutant onlymixtures containing at least 99% by weight of components already assessed by IMO", "International Council of ChemicalAssociations (ICCA) - High Production Volume List", "International Fragrance Association (IFRA) Survey: Transparency List", "OECDList of High Production Volume (HPV) Chemicals", "OSPAR List of Chemicals for Priority Action"isopropyl benzene - cumene (CAS: 98-82-8) is found on the following regulatory lists;"Australia Exposure Standards", "Australia Hazardous Substances", "Australia High Volume Industrial Chemical List (HVICL)","Australia Inventory of Chemical Substances (AICS)", "Australia National Pollutant Inventory", "Australia Standard for theUniform Scheduling of Medicines and Poisons (SUSMP) - Appendix E (Part 2)", "Australia Standard for the Uniform Scheduling ofMedicines and Poisons (SUSMP) - Schedule 5", "GESAMP/EHS Composite List - GESAMP Hazard Profiles", "IMO IBC Code Chapter 17:Summary of minimum requirements", "IMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances Carried in Bulk", "IMOProvisional Categorization of Liquid Substances - List 2: Pollutant only mixtures containing at least 99% by weight of componentsalready assessed by IMO", "International Agency for Research on Cancer (IARC) - Agents Reviewed by the IARC Monographs","International Fragrance Association (IFRA) Survey: Transparency List", "OECD List of High Production Volume (HPV) Chemicals","OSPAR List of Chemicals for Priority Action"naphthalene (CAS: 91-20-3) is found on the following regulatory lists;"Australia - Australian Capital Territory - Environment Protection Regulation: Ambient environmental standards (AQUA/1 to 6 - noncontinued...


Fujifilm FJ MC-E Plate Multicleaner 1LChemwatch Material Safety Data SheetIssue Date: 24-Aug-2011 CHEMWATCH 28-11579317SPVersion No:2.0Page 12 of 12Section 15 - REGULATORY INFORMATIONpesticide anthropogenic organics)", "Australia - Australian Capital Territory - Environment Protection Regulation: Ambientenvironmental standards (Domestic water supply - organic compounds)", "Australia - Australian Capital Territory - EnvironmentProtection Regulation: Pollutants entering waterways taken to cause environmental harm (Aquatic habitat)", "Australia -Australian Capital Territory - Environment Protection Regulation: Pollutants entering waterways taken to cause environmental harm(Domestic water supply quality)", "Australia - New South Wales Hazardous Substances Requiring Health Surveillance", "Australia -Western Australia Hazardous Substances Requiring Health Surveillance", "Australia Exposure Standards", "Australia HazardousSubstances", "Australia Hazardous Substances Requiring Health Surveillance", "Australia Inventory of Chemical Substances (AICS)","Australia National Pollutant Inventory", "Australia Occupational Health and Safety (Commonwealth Employment) (NationalStandards) Regulations 1994 - Hazardous Substances Requiring Health Surveillance", "Australia Standard for the Uniform Schedulingof Medicines and Poisons (SUSMP) - Appendix E (Part 2)", "Australia Standard for the Uniform Scheduling of Medicines and Poisons(SUSMP) - Appendix F (Part 3)", "Australia Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Appendix G","Australia Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) - Schedule 5", "Australia Standard for theUniform Scheduling of Medicines and Poisons (SUSMP) - Schedule 6", "GESAMP/EHS Composite List - GESAMP Hazard Profiles", "IMO IBCCode Chapter 17: Summary of minimum requirements", "IMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances Carried inBulk", "IMO Provisional Categorization of Liquid Substances - List 2: Pollutant only mixtures containing at least 99% by weightof components already assessed by IMO", "IMO Provisional Categorization of Liquid Substances - List 3: (Trade-named) mixturescontaining at least 99% by weight of components already assessed by IMO, presenting safety hazards", "International Agency forResearch on Cancer (IARC) - Agents Reviewed by the IARC Monographs", "International Chemical Secretariat (ChemSec) SIN List(*Substitute It Now!)", "International Fragrance Association (IFRA) Survey: Transparency List", "OECD List of High ProductionVolume (HPV) Chemicals", "OSPAR List of Chemicals for Priority Action"5-chloro-2-methyl-4-isothiazolin-3-one (CAS: 26172-55-4) is found on the following regulatorylists;"Australia - Victoria Occupational Health and Safety Regulations - Schedule 9: Materials at Major Hazard Facilities (And TheirThreshold Quantity) Table 2", "Australia Inventory of Chemical Substances (AICS)", "Australia National Pollutant Inventory","International Fragrance Association (IFRA) Survey: Transparency List", "OECD List of High Production Volume (HPV) Chemicals"2-methyl-4-isothiazolin-3-one (CAS: 2682-20-4) is found on the following regulatory lists;"Australia Inventory of Chemical Substances (AICS)", "Australia National Pollutant Inventory", "International FragranceAssociation (IFRA) Survey: Transparency List", "OECD List of High Production Volume (HPV) Chemicals"No data for Fujifilm FJ MC-E Plate Multicleaner 1L (CW: 28-1157)Section 16 - OTHER INFORMATIONDenmark Advisory list for selfclassification of dangerous substancesSubstance CAS Suggested codes5- chloro- 2- methyl- 4- isothiazolin- 26172- 55- 4 R433- one2- methyl- 4- isothiazolin- 3- one 2682- 20- 4 R43■ Classification of the preparation and its individual components has drawn on official and authoritative sources as well asindependent review by the Chemwatch Classification committee using available literature references.A list of reference resources used to assist the committee may be found at:www.chemwatch.net/references.■ The (M)SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whetherthe reported Hazards are Risks in the workplace or other settings.This document is copyright. Apart from any fair dealing for the purposes of private study, research, review orcriticism, as permitted under the Copyright Act, no part may be reproduced by any process without writtenpermission from CHEMWATCH. TEL (+61 3) 9572 4700.Issue Date: 24-Aug-2011Print Date: 26-Apr-2012This is the end of the MSDS.

More magazines by this user
Similar magazines