12.07.2015 Views

Christie LW600 Serial Communications Protocol-Expanded

Christie LW600 Serial Communications Protocol-Expanded

Christie LW600 Serial Communications Protocol-Expanded

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Status Read Commands8.5.2 CF_TDOTS CommandCommand“CF_TDOTS_%1” [CR]%1 “mmmm – nnnn” - Directly specify setting value of Total Dots“mmmm” indicates minimum value, which is current (DisplayArea H + Position H) value“nnnn” indicates maximum value, that dot clock does not exceedmore than 140MHz.“UP” - Increment setting value of Total Dots by 1“DN” - Decrement setting value of Total Dots by 1Detail Set value of Total Dots in PC signal (available only in the normalPower ON status).The value set by this command is not stored in the projector’smemory. Therefore, when the power is turned to ALL OFF status, thevalue returns to the original setting. (It is stored in Suspend mode.)Response Acceptable “000” [CR]Unacceptable8.5.3 CF_H-POS CommandCommand“CF_H-POS_%1” [CR]“101” [CR]• When input is Video signal• When input is no signal%1 “0000-nnnn” - Directly specify setting value of Horizontal Position“nnnn” indicates maximum value, which is current value of (TotalDots – Display Area H)“UP” - Increment setting value of Horizontal Position by 1“DN” - Decrement setting value of Horizontal Position by 1Detail Set value of Horizontal Position in PC signal (available only in thenormal Power ON status).The value set by this command is not stored in the projector’smemory. Therefore, when the power is turned to ALL OFF status, thevalue returns to the original setting. (It is stored in Suspend mode.)Response Acceptable “000” [CR]Unacceptable“101” [CR]• When input is Video signal• When input is no signal<strong>LW600</strong>-LX900-LX1000 RS232 Codes-<strong>Expanded</strong> Technical Reference Information 8-9020-000046-02 Rev 2 (07-2011)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!