3.Composition/information

More Magazines

Recommendations

Info

3.Composition/information on ingredientsName CAS number % by weightDistillates (petroleum), hydrotreated heavy naphthenic 64742-52-5 10 - 20There are no additional ingredients present which, within the current knowledge of the supplier and in theconcentrations applicable, are classified as hazardous to health or the environment and hence require reporting inthis section.4.First aid measuresEye contactSkin contactInhalationIngestionProtection of first-aidersNotes to physician5.Fire-fighting measuresFlammability of the product :Extinguishing mediaSuitable :Not suitable :Special exposure hazards :Hazardous thermaldecomposition productsSpecial protectiveequipment for fire-fighters:::::Check for and remove any contact lenses. Immediately flush eyes with plenty of water forat least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attentionimmediately.In case of contact, immediately flush skin with plenty of water for at least 15 minutes whileremoving contaminated clothing and shoes. Wash clothing before reuse. Clean shoesthoroughly before reuse. Get medical attention immediately.Move exposed person to fresh air. If not breathing, if breathing is irregular or if respiratoryarrest occurs, provide artificial respiration or oxygen by trained personnel. Loosen tightclothing such as a collar, tie, belt or waistband. Get medical attention immediately.Wash out mouth with water. Do not induce vomiting unless directed to do so by medicalpersonnel. Never give anything by mouth to an unconscious person. Get medicalattention immediately.: No action shall be taken involving any personal risk or without suitable training. It may bedangerous to the person providing aid to give mouth-to-mouth resuscitation.:No specific treatment. Treat symptomatically. Contact poison treatment specialistimmediately if large quantities have been ingested or inhaled.In a fire or if heated, a pressure increase will occur and the container may burst.Use an extinguishing agent suitable for the surrounding fire.None known.Promptly isolate the scene by removing all persons from the vicinity of the incident if thereis a fire. No action shall be taken involving any personal risk or without suitable training.: No specific data.Fire-fighters should wear appropriate protective equipment and self-contained breathingapparatus (SCBA) with a full face-piece operated in positive pressure mode.6.Accidental release measuresPersonal precautions :Environmental precautionsMethods for cleaning upNo action shall be taken involving any personal risk or without suitable training. Evacuatesurrounding areas. Keep unnecessary and unprotected personnel from entering. Do nottouch or walk through spilled material. Avoid breathing vapor or mist. Provide adequateventilation. Wear appropriate respirator when ventilation is inadequate. Put onappropriate personal protective equipment (see section 8).: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains andsewers. Inform the relevant authorities if the product has caused environmental pollution(sewers, waterways, soil or air).Small spill :Stop leak if without risk. Move containers from spill area. Dilute with water and mop up ifwater-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material andplace in an appropriate waste disposal container. Dispose of via a licensed wastedisposal contractor.Validated on 5/6/2011.RUST PREVENT 5002/6
6.Accidental release measuresLarge spill :Stop leak if without risk. Move containers from spill area. Approach release from upwind.Prevent entry into sewers, water courses, basements or confined areas. Wash spillagesinto an effluent treatment plant or proceed as follows. Contain and collect spillage withnon-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earthand place in container for disposal according to local regulations (see section 13).Dispose of via a licensed waste disposal contractor. Contaminated absorbent materialmay pose the same hazard as the spilled product. Note: see section 1 for emergencycontact information and section 13 for waste disposal.7.Handling and storageHandlingStorage::Put on appropriate personal protective equipment (see section 8). Eating, drinking andsmoking should be prohibited in areas where this material is handled, stored andprocessed. Workers should wash hands and face before eating, drinking and smoking.Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or mist.Keep in the original container or an approved alternative made from a compatiblematerial, kept tightly closed when not in use. Empty containers retain product residue andcan be hazardous. Do not reuse container.<strong>Store</strong> in accordance with local regulations. <strong>Store</strong> in original container protected fromdirect sunlight in a dry, cool and well-ventilated area, away from incompatible materials(see section 10) and food and drink. Keep container tightly closed and sealed until readyfor use. Containers that have been opened must be carefully resealed and kept uprightto prevent leakage. Do not store in unlabeled containers. Use appropriate containmentto avoid environmental contamination.8.Exposure controls/personal protectionOccupational exposure limitsIngredientDistillates (petroleum), hydrotreated heavynaphthenicExposure limitsACGIH TLV (United States, 2/2010).TWA: 5 mg/m³ 8 hour(s). Form: Inhalable fraction. See Appendix C,paragraph A. Inhalable Particulate Mass TLVs (IPM–TLVs) for thosematerials that are hazardous when deposited anywhere in the respiratorytract.OSHA PEL (United States, 6/2010).TWA: 5 mg/m³ 8 hour(s).Consult local authorities for acceptable exposure limits.Recommended monitoringproceduresEngineering measuresHygiene measuresPersonal protectionRespiratoryHands :: If this product contains ingredients with exposure limits, personal, workplace atmosphereor biological monitoring may be required to determine the effectiveness of the ventilationor other control measures and/or the necessity to use respiratory protective equipment.: No special ventilation requirements. Good general ventilation should be sufficient tocontrol worker exposure to airborne contaminants. If this product contains ingredientswith exposure limits, use process enclosures, local exhaust ventilation or otherengineering controls to keep worker exposure below any recommended or statutorylimits.: Wash hands, forearms and face thoroughly after handling chemical products, beforeeating, smoking and using the lavatory and at the end of the working period. Appropriatetechniques should be used to remove potentially contaminated clothing. Washcontaminated clothing before reusing. Ensure that eyewash stations and safety showersare close to the workstation location.:Use a properly fitted, air-purifying or air-fed respirator complying with an approvedstandard if a risk assessment indicates this is necessary. Respirator selection must bebased on known or anticipated exposure levels, the hazards of the product and the safeworking limits of the selected respirator.Chemical-resistant, impervious gloves complying with an approved standard should beworn at all times when handling chemical products if a risk assessment indicates this isnecessary.Validated on 5/6/2011.RUST PREVENT 5003/6
Page 1: 1.Product nameSupplier/Manufacturer
Page 5 and 6: 11.Toxicological informationNumeric

MSDS - DuBois Chemicals Online Store

Transform your PDFs into Flipbooks and boost your revenue!

MSDS - DuBois Chemicals Online Store

Transform your PDFs into Flipbooks and boost your revenue!

Delete template?

Save as template ?