12.07.2015 Views

HBC power connector Product description • Contact ... - Hypertac

HBC power connector Product description • Contact ... - Hypertac

HBC power connector Product description • Contact ... - Hypertac

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

1.2. Non-removable straight crimp contactsCrimp contact size codesCode 300 amp <strong>connector</strong> 500 amp <strong>connector</strong>Conductorsize (mm²)Crimp barrelbore (mm)Conductorsize (mm²)Crimp barrelbore (mm)B 25 7.0 50 10.0D 25 7.9 50 11.0H - - 70 13.0K 35 9.2 - -Q - - 95 14.5S 50 11.0 - -V - - 120 15.01.3. Backshell exit angle illustrationImportant: This section applies to plastic-bodied right-angle backshell plugs only.Right-angle backshells for plastic-bodied plugs are factory fitted and non-adjustable.The exit angle is related to the position of the red alignment marks printed on theplug and receptacle bodies. When the <strong>connector</strong>s are mated, the cable will emergefrom the plug at a specified angle. The standard angle is zero degrees. Other anglesare available in 15 degree increments to account for a wide range of panel and cablelayouts; see table below.AlignmentmarksStandard zero degreeposition (code A)135°Backshell code KA 0° G 90° N 180° U 270°B 15° H 105° P 195° V 285°C 30° J 120° Q 210° W 300°D 45° K 135° R 225° X 315°E 60° L 150° S 240° Y 330°F 75° M 165° T 255° Z 345°Page 3 of 16

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!