Mueller® 300TM Ball Valves - Mueller Co.

Mueller ® 300TMBall ValvesThere is a Muellerball valve for your application

Mueller...your assurance ofquality, dependable ball valvesThe ball valve designed for300 psig working pressureBefore designing this comprehensive lineof ball valves, we looked at the needs of themarketplace. We studied existing designs tosee how well those needs were being met.And, most importantly, we asked valve usersacross the country what they wanted in aball valve.The result is the Mueller ® 300 TM BallValve, a comprehensive line of valveswith distinct features which set them apartfrom the competition.Consider these special advantagesof Mueller ball valves:■ 300 psig working pressure—the highestin the industry, far exceeding AWWAstandards; 300 psig working pressureallows your system to grow and handleincreased pressures.■ Longevity—designed for strength anddurability, especially at the criticalball-to-stem connection.■ Blow-out-proof stem—preventsstem ejection and assures reliability.■ True bi-directional flow capabilityin all styles.■ Quarter-turn check is located under thevalve cap. Location and strength of materialaround the check help prevent breakage orleaks should over-torquing occur.■ The enlarged cap on curb valves is easyto locate and turn in the curb box or pit.The cap’s sloping shoulders shed dirt toaid operating wrench engagement.Mueller ball valves are available incorporation, curb, service, in-line meterand angle meter styles, with a full selectionof connection options, including Mueller110 ® Compression Connections.Mueller stands forquality and serviceOur priority is manufacturing quality,dependable, competitively pricedproducts—products that install properly,perform as expected and are easy to maintain.Every ball valve we make is tested beforeshipment to verify performance. Ournationwide network of distributors hasa thorough knowledge of the waterworksindustry. Add to that network Mueller fieldsales and customer service representatives,and you are assured that assistance isalways available should you need it.

Designed and manufacturedto meet your needs■ 300 psig workingpressure rating.■ Lockwing (whenequipped on meter valve)accepts bullet lock.■ Quarter-turn valvesfeature strong checks.■ Double-stem O-ringssupported in machinedgrooves for secure, leak-tightoperation.■ Blow-out-proof stem -design prevents separationand ensures dependabilityand safety.■ Checkless 360 orotation available.■ O-ring.■ Stainless steelreinforced seatgaskets assurereliable seal underfull flow and pressure.■ Stem/ball connectionoptimized for strength toresist shearing or twisting.■ Straight-through designof in-line valves allowsmaximum flow andminimum pressure loss.■ Full thread depth on FIPends (meets ANSI/AWWAC800 standard).■ FLUOROCARBON coated ballensures smooth operation.■ Bronze components areconstructed of solid 85-5-5-5brass for strength and durability(meets ASTM standard).■ Lever handles available.■ Mueller ball valvesare suitable for use astest valves on backflowpreventers (in compliancewith Notice 89-001 of F.C.C.C.and H.R., which requiresblow-out-proof stems).■ Swivel nut on 3/4" and 1"meter valves; flange on1-1/2" and 2" meter valves.

CORPORATION BALL VALVESMueller ® corporation ball valves offer reliable service, and are availablewith either CC or iron pipe thread inlets specially matched to Muellerdrilling and tapping tools to assure leak-tight installation. Corporationball valves are easy to install and require no adjustment for easyturning. A style is available which includes a “Reclaimed Water”tag attached prominently at the base of the operating stem.SIZES AND CONNECTIONS*Sizes: 3/4", 1", 1-1/2", 2".Connection combinations:Inlets — CC, IP.Outlets — Mueller 110 ® Compression Connections for either CTStubing or IPS pipe, copper flare, pack joint (CTS), and male andfemale iron pipe thread.CURB BALL VALVESIN-LINE METER AND SERVICE BALL VALVESYou can specify a Mueller curb ball valve with the confidence it willprovide years of trouble-free service without replacement or specialattention, helping to control rising maintenance costs. Mueller curbvalves offer premium quality, long-term durability, dependability andperformance. Valves are available with or without a lockwing.SIZES AND CONNECTIONS*Sizes: 3/4"**, 1"**, 1-1/2", 2".Inlet/outlet connection combinations:Mueller 110 Compression Connections for either CTStubing or IPS pipe, copper flare, pack joint (CTS, IPS,PEP, PVC), and male and female iron pipe thread.The Minneapolis-pattern top thread is available oncurb ball valves in sizes 3/4" through 2". Curb boxesare designed to thread onto Minneapolis-pattern curbball valves, producing a rigid assembly. (Threads arenotched to allow water to drain from box.)Mueller in-line meter ball valves may be specified for all typesof commercial and residential meter installations. They are easyto operate and offer reliable performance over many years.SIZES AND CONNECTIONS*Meter sizes (outlets): 5/8", 5/8" x 3/4" or 3/4", 1", 1-1/2", 2". Upto 1" are meter swivel nut; 1-1/2" and 2" are two-bolt meter flange.Inlet sizes: 3/4"**, 1"**, 1-1/2", 2".Inlet/outlet connection combinations: Mueller 110 CompressionConnections for either CTS tubing or IPS pipe, copper flare, packjoint (CTS, IPS), male and female iron pipe thread, meter swivel nut,and two-bolt meter flange.Many different lengths of FIP x flare and FIP x FIP styles especiallysuited for retro-fit applications are available. Contact your authorizedMueller Distributor, Mueller Sales Representative, or CustomerService Center for more information.

ANGLE METER AND SERVICE BALL VALVESMueller ® angle meter ball valves utilize a unique design that provideseffective sealing, with flow from either direction. A second valve maybe installed downstream from the meter, allowing meter changeoutswithout pit flooding.These valves are also available on Mueller copper meter yokes.Critical centerline-to-end dimensions of the angle meter ball valveare the same as the Mueller ground key angle meter stops, assuringinterchangeability of existing meter installations.SIZES AND CONNECTIONS*Meter sizes (outlets): 5/8", 5/8" x 3/4" or 3/4", 1", 1-1/2", 2". Upto 1" are meter swivel nut; 1-1/2" and 2" are two-bolt meter flange.Flanges are double-drilled to accept either 1-1/2" or 2" meters.Inlet sizes: 3/4"**, 1"**, 1-1/2", 2".Inlet/outlet connection combinations: Mueller 110 ® CompressionConnections for either CTS tubing or IPS pipe, copper flare***,pack joint (CTS, IPS), and male and female iron pipe thread.OPTIONSMueller curb, meter and service valves are availablewith full port, or reduced port in selected sizes. Theyare regularly furnished with a quarter-turn check –contact the Mueller Customer Service Center to orderoptional 360° turn valves. Larger curb valves may beordered with an integral 2" square wrench nut as anoption (a 2" nut is also available as a separate piecethat can be pinned to the existing valve cap).Mueller ® 300 TM Ball Valves are available in both angleand in-line styles for use on Mueller cast iron meter bars(with lock nut outlet), and on Mueller cast iron meteryoke boxes. Angle valves are also offered in an extensiveselection of Mueller Copper Meter Yokes and Resetters,and in Mueller ® /McCullough Meter Boxes. Refer tothe Mueller Water Distribution Products Catalog for fulldetails, or contact a Mueller Representative.HANDLESAngle and straight lever handles are available (straight in choice oftwo lengths) to fit both 3/4" and 1" meter valves. A handle coded withthe industry standard color for reclaimed water is also available.* Check the Mueller Water DistributionProducts catalog or contact MuellerCustomer Service for the availability ofspecific size and connection combinations.** Available in reduced port style.*** Available with FIP outlet option inselected sizes.Let’s talk about your needsThere are over 600 products in the comprehensive Mueller ballvalve line. We’re continually expanding this line to meet thechanging needs of the marketplace. If the ball valve you needis not included in this brochure, please call us at 1-800-423-1323to discuss your requirements.We would appreciate the opportunity to work with you.

Main Office—Decatur, ILWater Division: 1-800-423-1323www.muellercompany.comCanada—Mueller Canada Inc., Barrie, Ontario 1-705-719-9965All products must be installed and maintained in accordance with applicable instructions and/or standards.Form 11693-Rev 3/07-20M-1 Copyright 1995 Mueller Co. Printed in U.S.A.