C SERIES EXCAVATORSCX250C I CX300C I CX350C
Meet the high-efficiency CThe new standardWith the introduction of the new C Seriesexcavators, Case sets the standard in termsof fuel efficiency, productivity and operatorcomfort. Driven by advanced engineering,they deliver superior power, performance andreturn on investment.Superior fuel economy slashesoperating costsLooking to increase profits? Our awardwinningline of excavators just got better.We’ve already proven that Case excavatorsdeliver up to 15 percent greater fuel efficiencythan the competition. Plus, the C Series isengineered to deliver up to a 10 percentfuel savings over our previous models. Wereduced total fuel consumption through theseadvanced technologies that intelligentlymanage the engine and hydraulic systemsas you work the machine – to optimize bothpower and efficiency.• BEC – Boom Economy Control• AEC – Auto Economy Control• SWC – Swing Relief Control• SSC – Spool Stroke ControlThe packaging of engine, cooling and exhaustsystems demonstrates an extremely efficientuse of space, while still maintaining excellentserviceability and operator visibilityPlus, you’ll reduce cost and service time withour best-in-class 500-hour engine oil changeinterval, 5,000-hour hydraulic oil changeinterval and 1,000-hour greasing interval withEasy Maintenance System bushings.Productivity to get the job done fasterWith 5 percent faster cycle times thanprevious models, the new Case excavatorswill fill up to 10 more trucks every shift. TheCX250C features 6 percent more lift capacityand increased operating weight to tacklebigger jobs. Plus, we retained our industryleadingfine-control. All of this is donewhile reducing fuel consumption andcomplying with the EPA’s Tier 4 Interimemissions requirements.Increased operator comfortand productivityCase C Series excavators feature an allnewROPS cab, designed with comfort andproductivity in mind. We improved operatorcomfort by increasing overall cab space by
ase C Series excavators7 percent. We increased airflow by 25percent and air-conditioning performance by8 percent. Operators will also appreciate theair-suspension seat, see-through skylight andbest-in-class soundproofing that brings soundlevels to near-automotive levels of 70 dBa.Our new control monitor provides a widerange of operating data at the operator’sfingertips, including fuel consumption perhour. We improved operator visibility by addinga rear view camera with 7-inch monitoras standard equipment. These excavatorsalso include an easy-to-use in-cab auxiliaryhydraulic setting system with a new option forup to 10 memory recall settings to make toolchanges quick and operator-friendly.Roomy and quiet cab with integrated ROPSNew monitor with rear-view camera modeEasy maintenance, great supportCase has a well-earned reputation for easyto-maintainand service equipment.You’ll appreciate features such as wide-openpanels for easy access to service points,ground level access to grouped lubricationpoints, along with quick-change filters andsimple gauges for daily service checks.We also provide customer support with aCustomer Assistance Hotline that operatesfrom 8 a.m. to 11 p.m. seven days a week(except Sundays, December through March).Want more info? Visit www.CompareCase.comor www.Casece.com. Then see your Casedealer for a demonstration, climb inside andput a new C Series excavator to work.
www.casece.comMODEL CX250C CX300C CX350CEngine, Net 177 hp (132.1 kW) 207 hp (154 kW) 266 hp (198 kW)Tier 4 Interim Certified CEGR Technology CEGR Technology CEGR TechnologyBucket Digging Force* 36,420 lbf (163 kN) 39,250 lbf (190.2 kN) 51,440 lbf (248.4 kN)w/ Auto Power Boost 39,120 lbf (163 kN) 42,760 lbf (190.2 kN) 55,840 lbf (248.4 kN)Arm Breakout Force* 26,980 lbf (120 kN) 27,340 lbf (121.6 kN) 36,850 lbf (163.9 kN)w/ Auto Power Boost 29,000 lbf (129 kN) 29,760 lbf (129 kN) 40,020 lbf (178 kN)Digging Depth** 22 ft 8 in (6.9 m) 23 ft 3 in (7.1 m) 24 ft 1 in (7.34 m)Operating Weight 55,400 lb (25 100 kg) 65,900 lb (29 900 kg) 80,000 lb (36 300 kg)Swing Torque 55,300 lbf (246 kN) 68,200 lbf (303 kN) 82,630 lbf (368 kN)Drawbar Pull 45,200 lbf (201 kN) 52,400 lbf (233 kN) 59,100 lbf (263 kN)* ISO 6015 Standards ** Standard boom and armExcavator DimensionsCX250CCMEABKLLine drawings are for illustrative purpose onlyand may not be exact representation of unit.JFD9 ft 10 in (3.0 m) Arm 8 ft 2 in (2.5 m) Arm 11 ft 6 in (3.52 m) ArmA. Overall height (w/ attachment) 10 ft 6 in (3.2 m) 10 ft 6 in (3.2 m) 11 ft 0 in (3.36 m)B. Cab height 9 ft 10 in (3.0 m) 9 ft 10 in (3.0 m) 9 ft 10 in (3.0 m)C. Overall length (w/ attachment) 32 ft 5 in (9.88 m) 32 ft 8 in (9.95 m) 32 ft 6 in (9.91 m)D. Overall length (w/o attachment) 17 ft 3 in (5.27 m) 17 ft 3 in (5.27 m) 17 ft 3 in (5.27 m)E. Width of upperstructure 9 ft 1 in (2.77 m) 9 ft 1 in (2.77 m) 9 ft 1 in (2.77 m)F. Track overall length 15 ft 3 in (4.65 m) 15 ft 3 in (4.65 m) 15 ft 3 in (4.65 m)G. Track overall width w/ 31.5 in (800 mm) shoes 11 ft 1 in (3.39 m) 11 ft 1 in (3.39 m) 11 ft 1 in (3.39 m)H. Track shoe width 31.5 in (800 mm) 31.5 in (800 mm) 31.5 in (800 mm)J. Center to center (idler to sprocket) 12 ft 7 in (3.84 m) 12 ft 7 in (3.84 m) 12 ft 7 in (3.84 m)K. Upperstructure ground clearance 3 ft 7 in (1.1 m) 3 ft 7 in (1.1 m) 3 ft 7 in (1.1 m)L. Minimum ground clearance 16 in (0.46 m) 16 in (0.46 m) 16 in (0.46 m)M. Rear tail swing radius 9 ft 8 in (2.95 m) 9 ft 8 in (2.95 m) 9 ft 8 in (2.95 m)Operating weight* 55,400 lb (25 100 kg) 55,400 lb (25 100 kg) 55,400 lb (25 100 kg)Ground pressure 5.37 psi (0.37 bar) 5.37 psi (0.37 bar) 5.37 psi (0.37 bar)*With 19 ft 2 in (5.85 m) boom, 31.5 in (800 mm) track shoe, 2,544 lb (1154 kg) bucket, 165 lb (75 kg) operator, full fuel and standard equipment.HG©2010 CNH America LLC. All rights reserved. Case is a registeredtrademark of CNH America LLC. Any trademarks referred to herein,in association with goods and/or services of companies other thanCNH America LLC, are the property of those respective companies.Printed in U.S.A.Always read the operator’s manual beforeoperating any equipment. Inspectequipment before using it, and be sureit is operating properly. Follow the product safety signs and use anysafety features provided.All engines meet current EPA emission regulations.All specifications are stated in accordance with SAE standards orrecommended practices, where applicable.IMPORTANT: Case Construction Equipment Inc. reserves the rightto change these specifications without notice and without incurringany obligation relating to such change. Availability of some modelsand equipment builds vary according to the country in which theequipment is used. The illustrations and text may include optionalequipment and accessories and may not include all standard equipment.Your Case dealer/distributor will be able to give you details ofthe products and their specifications available in your area.Form No. CCE201012CSeriesPrelim-RContains 10%post-consumer fiberCase construction equipmentis biodiesel friendly.