color gps plotter

2. PLOTTER DISPLAYSass DisaThe compass display, shown in combination displays, provides steering information. The compassrose shows two triangles: the red triangle shows own ship’s course and the black triangle,which moves with ship’s course, shows the bearing to destination waypoint.The water temperature and depth graphs, which require appropriate sensors, shows the latest 10minutes of water temperature and depth data.DestinationwaypointSpeedthroughwaterRange to destination waypointSpeed over groundTime-to-goto destinationDEST:0001WPTTG:25:26DPT45.6ftSTW*12.4KTS155ºDST*305.3nmSOG*12.0KtsETA:12:28AMTMP40.4ºFEstimated time ofarrival at destinationDestinationwaypointbearing(black)Depthgraph**wNEBearing scaleShip's course(red)Water temperaturegraph**0.5 0.5Shown (in red)when direstion tosteer is "left".XTE monitor(See below fordescription.)Shown (in green)when direction tosteer is "right."Own ship marker(Yellow)Compass distanceRea i t e E r ss tra err r it r**: Appropriate sensor is required.The XTE monitor, located below the compass rose, shows the distance you are off course and thedirection to steer to return to course. The own ship marker in the monitor moves according to directionand distance off course. An arrow appears at the right or left side of the XTE monitor andit shows the direction to steer to return to intended course. It is shown in red when you should steerleft, and green when you should steer right. In the example above you would steer left to return tocourse. To maintain course, steer the vessel so the own ship marker stays at the center of theXTE monitor. Note that the XTE range can be changed by rotating the [ENTER] knob.aataData marked with * in above can be changed to display. See page 2-5.