Manual - Gates

MS LINKM/S LinkP/N P/N Q410 Q410Patent Patent Pending Pending®SENSORS1 3FIREDEPT.EXITLOOP1 3STRIKEOPENSAFETYLOOPOPEN LEFTRADIORECEIVERCENTERLOOPP/N Q410Patent Pending1 3OPEN RIGHTGATELOCKEDRESETMOTOR24 Volts DCDC-BACKUPMADE IN USAP/N P/N Q410 Q410Patent Patent Pending PendingW4CENTER SAFETY EXITGAG B AM/S Link®CenterLoopSafetyLoopSYSTEM ONSENSORS1 3ExitLoopFIREDEPT.EXITLOOP1 3Fire DeptKey SwitchSTRIKEOPENSAFETYLOOPTIMEROFFOPEN LEFTRADIORECEIVERCENTERLOOPP/N Q410Patent Pending– +60ON1 3OPEN RIGHTGATELOCKEDRESETMOTORClass 2SupplyStrike OpenRadio24 Volts DCPush Bu ton Receiver324 Volts DCDC-BACKUPPOWEROVERLOADMADE IN USAMASTER AND SLAVE WITH TIMER ONMaster and Slave Boards are InterchangeableMaster Omni Board Primary Control for SystemCaution: Never run high voltage and low voltage wires in same conduitUse low voltage wires in separate conduit to connect gate operators togetherCENTER SAFETY EXITMaster Omni BoardTIMER603W4GBASYSTEM ONALARMSENSORREVERSESENSORTIMEROFFPOWER60 3OVERLOADONOPENSENSOR ALARMNSOROFFOPEN LEFTON1 3OmniControl Surge SuppressorBMS LINKG B ACenterLoopSafetyExitFire DeptLoopLoopKey Switch– +Class 2SupplyStrike OpenRadio24 Volts DCPush Bu ton ReceiverCENTER SAFETY EXITALARMSENSORREVERSESENSORCLOSESTOPOPENALARMSENSORCOMMANDPROCESSEDOPEN RIGHTAdjust Time Desired0 to 60 secondsSlave Omni BoardCENTER SAFETY EXITCOMMANDPROCESSEDSTOPCLOSEMaster Timer “ON”OmniControl Surge SuppressorUse Shielded Twisted Wiresto Connect the SurgeSuppressor of eachGate Operator TogetherCHASSISGROUNDG B AM/S LinkCenterLoopCHASSISGROUNDG B AM/S LinkCenterLoopMAXIMUMCounterclockwiseSetting1. Connect G from the master surge suppressor to G of the slave surgesuppressor.2. Connect B from the master surge suppressor to B of the slave surgesuppressor.3. Connect A from the master surge suppressor to A of the slave surgesuppressor.4. Turn timers on BOTH Omni boards to the “ON” position5. Turn the SLAVE Timer adjustment all the way Counterclockwise6. Use MASTER timer ONLY to select the desired timeNSORTIMEROFFOPEN LEFT60ON1 33OPEN RIGHTSlave Timer “ON”19